* .gitignore: Add 'ChangeLog'.
* build-aux/gitlog-to-changelog: New file, from Gnulib.
* build-aux/gitlog-to-emacslog: New file.
* CONTRIBUTE: Document the revised workflow.
* Makefile.in (clean): Remove *.tmp and etc/*.tmp*
instead of just special cases.
(CHANGELOG_HISTORY_INDEX_MAX, CHANGELOG_N, gen_origin): New vars.
(ChangeLog, unchanged-history-files, change-history)
(change-history-commit): New rules.
* admin/admin.el (make-manuals-dist--1):
Don't worry about doc/ChangeLog.
* admin/authors.el: Add a FIXME.
* admin/make-tarball.txt:
* lisp/calendar/icalendar.el:
* lisp/gnus/deuglify.el:
* lisp/obsolete/gulp.el:
* lwlib/README:
Adjust to renamed ChangeLog history files.
* admin/merge-gnulib (GNULIB_MODULES): Add gitlog-to-changelog.
* admin/notes/repo: Call it 'master' a la Git, not 'trunk' a la Bzr.
Remove obsolete discussion of merging ChangeLog files.
New section "Maintaining ChangeLog history".
* build-aux/git-hooks/pre-commit:
Reject attempts to commit files named 'ChangeLog'.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* make-dist: Make and distribute top-level ChangeLog if there's a
.git directory. Distribute the new ChangeLog history files
instead of scattered ChangeLog files. Distribute the new files
gitlog-to-changelog and gitlog-to-emacslog.
Fixes: bug#19113
This incorporates:
2015-03-19 fdopendir: port better to MinGW
2015-03-18 fdopendir: fix typo in comment
2015-02-24 glob, etc.: port to MSVC v18 on MS-Windows 8.1
* lib/dirent.in.h, lib/fdopendir.c: Update from gnulib.
* lib/dirfd.c, m4/dirfd.m4: New files from gnulib.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
This attempts to repair problems introduced by the bad merge
5491fd1098. The easiest way for me
to fix the badly-merged gnulib files was to run
'admin/merge-gnulib', so I did that, which also imported the
following changes:
* build-aux/update-copyright, m4/gnulib.m4:
Update from gnulib, incorporating:
2015-01-15 time: port to MinGW32 3.21
2015-01-15 update-copyright: apply to self
2015-01-11 update-copyright: recognize groff's \(co marker
These are dates that admin/update-copyright did not update, or
updated incorrectly. Also, back out the copyright-date change to
doc/misc/texinfo.tex, as upstream hasn't updated that date yet.
2014-12-20 utimens: remove unnecessary assert
2014-12-16 stdalign: port better to HP compilers
2014-12-16 stdalign: work around Apple GCC 4.0 bug
* lib/stdalign.in.h, lib/utimens.c, m4/stdalign.m4: Update from gnulib.
* admin/merge-gnulib (GNULIB_MODULES): Add stddef, for max_align_t.
* lib/gnulib.mk: Regenerate.
* src/alloc.c (XMALLOC_BASE_ALIGNMENT): Use max_align_t instead of
a hack involving a union.
2014-12-12 stddef: support C11's max_align_t
2014-12-08 apply _GL_ATTRIBUTE_PURE to some inline functions
2014-12-02 support GNU format printf and scanf on mingw
* doc/misc/texinfo.tex, lib/stat-time.h, lib/stddef.in.h:
* lib/timespec.h, m4/extensions.m4, m4/stddef_h.m4, m4/stdio_h.m4:
Update from gnulib.
* lib/gnulib.mk: Regenerate.
2014-11-14 extern-inline: update commentary about GCC bugs
2014-11-06 unistd: port to iOS
2014-11-04 update from texinfo
* doc/misc/texinfo.tex, lib/unistd.in.h, m4/extern-inline.m4:
Update from gnulib.
It's not safe to call qsort or qsort_r, since they have undefined
behavior if the user-specified predicate is not a total order.
Also, watch out for garbage-collection while sorting vectors.
* admin/merge-gnulib (GNULIB_MODULES): Add vla.
* configure.ac (qsort_r): Remove, as we no longer use qsort-like
functions.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* lib/vla.h, m4/vararrays.m4: New files, copied from gnulib.
* lib/stdlib.in.h, m4/stdlib_h.m4: Sync from gnulib, incorporating:
2014-08-29 qsort_r: new module, for GNU-style qsort_r
The previous two files' changes are boilerplate generated by
admin/merge-gnulib, and should not affect Emacs.
* src/fns.c: Include <vla.h>.
(sort_vector_predicate) [!HAVE_QSORT_R]: Remove.
(sort_vector_compare): Remove, replacing with ....
(inorder, merge_vectors, sort_vector_inplace, sort_vector_copy):
... these new functions.
(sort_vector): Rewrite to use the new functions.
GCPRO locals, since the predicate can invoke the GC.
Since it's in-place return void; caller changed.
(merge): Use 'inorder', for clarity.
Fixes: debbugs:18361
This fix relies on having the 'fchdir' function, and on having
"." be searchable (or at least readable, on platforms lacking O_SEARCH),
but that's good enough to handle the vast majority of cases and the
remaining folks can just live with the annoyance of file systems
that occasionally can't be unmounted.
* configure.ac (fchdir): New function to check for.
* lib/save-cwd.c: Copy from gnulib, except omit the part that
allocates memory, since that can cause problems in Emacs.
* lib/save-cwd.h: Copy from gnulib.
Fixes: debbugs:18232
This incorporates:
2014-08-07 getdtablesize: fall back on sysconf (_SC_OPEN_MAX)
2014-08-05 sys_select: fix FD_ZERO problem on Solaris 10
* lib/getdtablesize.c, lib/sys_select.in.h: Update from gnulib.
This fixes a bug with the shell freezing. See:
http://debbugs.gnu.org/cgi/bugreport.cgi?bug=17598#185
Merge from gnulib, incorporating:
2014-05-31 dup2, fcntl, fcntl-h: port to AIX 7.1
* lib/fcntl.in.h, m4/dup2.m4, m4/fcntl.m4:
Update from gnulib.
This incorporates:
2014-06-02 acl: apply pure attribute to two functions
2014-06-01 gnulib-common.m4: add _GL_UNUSED_LABEL
2014-05-31 dup2, fcntl, fcntl-h: port to AIX 7.1
2014-05-30 ftoastr: work around compiler bug in IBM xlc 12.1
* lib/acl-internal.h, lib/fcntl.in.h, lib/ftoastr.h:
* m4/dup2.m4, m4/fcntl.m4, m4/gnulib-common.m4:
Update from gnulib.
This doesn't fix Bug#17598, but it does fix a regression since Emacs
built with xlc until recently, and perhaps it'll help us fix Bug#17598.
* configure.ac (GC_SETJMP_WORKS): Define for AIX, too.
Merge from gnulib, incorporating:
2014-05-30 ftoastr: work around compiler bug in IBM xlc 12.1
* lib/ftoastr.c: Update from gnulib.
* src/alloc.c (gdb_make_enums_visible): Remove FLOAT_TO_STRING_BUFSIZE.
* src/conf_post.h (FLEXIBLE_ARRAY_MEMBER) [__IBMC__]: Don't define to empty.
* src/lisp.h (FLOAT_TO_STRING_BUFSIZE): Make it a macro, instead of an enum,
to work around a compiler bug in IBM xlc 12.1.
This incorporates:
2014-01-23 pthread: work around winpthread header pollution on mingw
* lib/time.in.h: Update from gnulib.
* doc/misc/texinfo.tex: Update from texinfo.
This incorporates:
2014-01-20 stdalign: port to HP-UX compilers
2014-01-16 strtoimax: port to platforms lacking 'long long'
2014-01-16 update from texinfo
* doc/misc/texinfo.tex, lib/stdalign.in.h, lib/strtoimax.c:
Update from gnulib.
2013-12-17 gettimeofday: port recent C++ fix to Emacs
2013-12-17 gettimeofday: fix C++ crosscompilation
2013-12-17 qacl: port to Windows better
* lib/file-has-acl.c, lib/time.in.h, m4/gettimeofday.m4, m4/time_h.m4:
Update from gnulib.
* lib/gnulib.mk: Regenerate.
This scorches the earth and waits for spring;
see Ted Zlatanov and Stefan Monnier in
<http://lists.gnu.org/archive/html/emacs-devel/2013-12/msg00323.html>.
* configure.ac (with_openssl_default, HAVE_LIB_CRYPTO): Remove.
Do not say whether Emacs is configured to use a crypto library,
since it's no longer an option.
(gl_CRYPTO_CHECK): Define a dummy.
* lib/gl_openssl.h, m4/gl-openssl.m4: Remove.
* admin/merge-gnulib: Remove lib/gl_openssh.h and m4/gl-openssl.m4.
* src/Makefile.in (LIB_CRYPTO): Remove.
(LIBES): Don't use it.
On commonly used platform libcrypto uses architecture-specific
assembly code, which is significantly faster than the C code we
were using. See Pádraig Brady's note in
<http://lists.gnu.org/archive/html/bug-gnulib/2013-12/msg00000.html>.
Merge from gnulib, incorporating:
2013-12-07 md5, sha1, sha256, sha512: add gl_SET_CRYPTO_CHECK_DEFAULT
2013-12-07 md5, sha1, sha256, sha512: add 'auto', and set-default method
2013-12-04 include_next: minimize code duplication
2013-12-03 md5, sha1, sha256, sha512: support mandating use of openssl
2013-12-02 md5, sha1, sha256, sha512: use openssl routines if available
* configure.ac (--without-all): Set with_openssl_default too.
Use gl_SET_CRYPTO_CHECK_DEFAULT to default to 'auto'.
(HAVE_LIB_CRYPTO): New var.
Say whether Emacs is configured to use a crypto library.
* lib/gl_openssl.h, m4/absolute-header.m4, m4/gl-openssl.m4:
New files, copied from gnulib.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* lib/md5.c, lib/md5.h, lib/sha1.c, lib/sha1.h:
* lib/sha256.c, lib/sha256.h, lib/sha512.c, lib/sha512.h:
* m4/include_next.m4, m4/md5.m4, m4/sha1.m4, m4/sha256.m4, m4/sha512.m4:
Update from gnulib.
* src/Makefile.in (LIB_CRYPTO): New macro.
(LIBES): Use it.
This incorporates:
2013-11-08 extern-inline: port better to OS X 10.9
2013-11-08 fpending: fix regression on DragonFly BSD
* lib/fpending.h, m4/extern-inline.m4, m4/fpending.m4:
Update from gnulib.
Especially, C99 prohibits nesting a struct X inside struct Y if
struct X has a flexible array member.
Also, merge from gnulib, incorporating:
2013-11-03 intprops: port to Oracle Studio c99
* lib/intprops.h: Update from gnulib.
* src/alloc.c (struct sdata): New type.
(sdata): Implement in terms of struct sdata.
Remove u member; all uses replaced by next_vector, set_next_vector.
(SDATA_SELECTOR, SDATA_DATA, SDATA_DATA_OFFSET): Adjust to sdata change.
(SDATA_DATA_OFFSET): Now a constant, not a macro.
(struct sblock): Rename first_data member to data, which is now
a flexible array member. All uses changed.
(next_vector, set_next_vector, large_vector_vec): New functions.
(vector_alignment): New constant.
(roundup_size): Make it a multiple of ALIGNOF_STRUCT_LISP_VECTOR, too.
(struct large-vector): Now merely a NEXT member, since the old approach
ran afoul of stricter C99. All uses changed to use
large_vector_vec or large_vector_offset.
(large_vector_offset): New constant.
* src/dispnew.c: Include tparam.h, for tgetent.
Do not include term.h; no longer needed.
* src/gnutls.c (Fgnutls_boot): Don't continue after calling a _Noreturn.
* src/lisp.h (ENUM_BF) [__SUNPRO_C && __STDC__]: Use unsigned int.
(struct Lisp_Vector): Use a flexible array member for contents,
instead of a union with a member that is an array of size 1.
All uses changed.
(ALIGNOF_STRUCT_LISP_VECTOR): New constant, to make up for the
fact that the struct no longer contains a union.
(struct Lisp_Misc_Any, struct Lisp_Marker, struct Lisp_Overlay)
(struct Lisp_Save_Value, struct Lisp_Free):
Use unsigned, not int, for spacers, to avoid c99 warning.
(union specbinding): Use unsigned, not bool, for bitfield, as
bool is not portable to pre-C99 hosts.
This incorporates:
2013-10-14 acl: allow cross-compilation to Gentoo
2013-10-18 extern-inline: make safe for -Wundef usage
2013-09-30 fpending: use pure+const function attrs
* lib/fpending.h, m4/acl.m4, m4/extern-inline.m4: Update from gnulib.
This incorporates:
2013-10-10 strtoumax: port to Solaris 8
2013-10-09 strtoimax, strtoumax: port to HP-UX 11.11
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* lib/inttypes.in.h, lib/strtoimax.c, m4/inttypes.m4, m4/strtoimax.m4:
* m4/strtoumax.m4:
Update from gnulib.
Do this by using the Gnulib modules for this.
This should generate faster code on non-GCC, non-MSC platforms,
and make the code a bit more portable, at least in theory.
* admin/merge-gnulib (GNULIB_MODULES): Add count-one-bits
and count-trailing-zeros.
* lib/count-one-bits.c, lib/count-one-bits.h:
* lib/count-trailing-zeros.c, lib/count-trailing-zeros.h:
* m4/count-one-bits.m4, m4/count-trailing-zeros.m4:
New files, copied from gnulib.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* nt/gnulib.mk: Merge changes from lib/gnulib.mk.
* src/data.c: Include <count-one-bits.h>, <count-trailing-zeros.h>.
(USE_MSC_POPCOUNT, POPCOUNT_STATIC_INLINE)
(NEED_GENERIC_POPCOUNT, popcount_size_t_generic)
(popcount_size_t_msc, popcount_size_t_gcc):
Remove; now done by Gnulib.
(popcount_size_t): Now a macro that defers to Gnulib.
(count_trailing_zero_bits): Return int, for consistency with
Gnulib and because Emacs prefers signed to unsigned int.
Don't assume that size_t is either unsigned int or unsigned long
or unsigned long long.
(size_t_to_host_endian): Do not assume that size_t is either
exactly 32 or exactly 64 bits wide.
* src/lisp.h (BITS_PER_SIZE_T): Define consistently with BITS_PER_LONG
etc., so that it's now an enum constant, not a macro.
No need to assume that it's either 32 or 64.
Fixes: debbugs:15550
* src/conf_post.h (__has_builtin, assume): Remove; gnulib now does these.
* src/lisp.h: Include <verify.h>, for 'assume'.
This also incorpoprates:
2013-10-02 verify: new macro 'assume'
2013-09-26 dup2, dup3: work around another cygwin crasher
2013-09-26 getdtablesize: work around cygwin issue
This incorporates:
2013-09-24 manywarnings: enable nicer gcc warning messages
2013-09-23 warnings: port --enable-gcc-warnings to Solaris Studio 12.3
2013-09-21 timespec: use the new TIMESPEC_RESOLUTION elsewhere
* configure.ac (WERROR_CFLAGS): Omit -fdiagnostics-show-option
and -funit-at-a-time, since manywarnings does that for us now.
This incorporates the following changes:
2013-09-19 stdio: OS X port of putc_unlocked + extern inline
2013-09-19 signal: OS X port of sigaddset etc. + extern inline
2013-09-19 extern-inline: do not always suppress extern inline on OS X
2013-09-17 getgroups: statement without effect
2013-08-28 headers: check that _GL_INLINE_HEADER_BEGIN is defined
This portability layer is no longer needed, since Emacs has been
using struct timespec as a portability layer for some time.
Merge from gnulib, incorporating:
2013-08-27 timespec: new convenience constants and function
* src/atimer.h, src/buffer.h, src/dispextern.h, src/xgselect.h:
Include <time.h> rather than "systime.h"; that's all that's needed now.
* src/dispnew.c: Include <timespec.h> rather than "systime.h";
that's all that's needed now.
* src/systime.h (EMACS_TIME): Remove. All uses changed to struct timespec.
(EMACS_TIME_RESOLUTION): Remove. All uses changed to
TIMESPEC_RESOLUTION.
(LOG10_EMACS_TIME_RESOLUTION): Remove. All uses changed to
LOG10_TIMESPEC_RESOLUTION.
(EMACS_SECS, emacs_secs_addr): Remove. All uses changed to tv_sec.
(EMACS_NSECS): Remove. All uses changed to tv_nsec.
(make_emacs_time): Remove. All used changed to make_timespec.
(invalid_timespec): Rename from invalid_emacs_time. All uses changed.
(current_timespec): Rename from current_emacs_time. All uses changed.
(add_emacs_time): Remove. All uses changed to timespec_add.
(sub_emacs_time): Remove. All uses change dot timespec_sub.
(EMACS_TIME_SIGN): Remove. All uses changed to timespec_sign.
(timespec_valid_p): Rename from EMACS_TIME_VALID_P. All uses changed.
(EMACS_TIME_FROM_DOUBLE): Remove. All uses changed to dtotimespec.
(EMACS_TIME_TO_DOUBLE): Remove. All uses changed to timespectod.
(current_timespec): Rename from current_emacs_time. All uses changed.
(EMACS_TIME_EQ, EMACS_TIME_LT, EMACS_TIME_LE): Remove. All uses
changed to timespec_cmp.
* src/xgselect.c: Include <timespec.h>, since our .h files don't.
Gnulib's emulation of mkostemp doesn't have races that Emacs's does.
* configure.ac (mkostemp): Remove check for this function;
gnulib does the check now.
(mkstemp): Remove check for this no-longer-used function.
* lib/mkostemp.c, lib/secure_getenv.c, lib/tempname.c, lib/tempname.h:
* m4/mkostemp.m4, m4/secure_getenv.m4, m4/tempname.m4:
New files, copied from Gnulib.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* admin/merge-gnulib (GNULIB_MODULES): Add mkostemp.
* lib-src/movemail.c (main):
* lib-src/update-game-score.c (write_scores):
Use mkostemp (which now works on all platforms, due to changes
in the portability layer) rather than mktemp (which has a race)
or mkstemp (which we no longer bother with).
* src/callproc.c (create_temp_file):
* src/filelock.c (create_lock_file):
Assume mkostemp, since it's now provided by Gnulib.
Fixes: debbugs:15015
* lib/binary-io.c, lib/binary-io.h: New files.
Merge from gnulib, incorporating:
2013-07-09 accept4, dup3, pipe2: port to Cygwin
* lib/pipe2.c: Update from gnulib, as part of this merge.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
Fixes: debbugs:14821
* lib/ignore-value.h: Remove this gnulib-imported file.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* admin/merge-gnulib (GNULIB_MODULES): Remove ignore-value.
* src/callproc.c (child_setup) [!DOS_NT]: Don't try to stuff an error
number into an exit status. Instead, use EXIT_CANCELED.
(child_setup) [!MSDOS]: Avoid possible deadlock with vfork.
* src/callproc.c (relocate_fd):
* src/emacs.c (close_output_streams, main):
* src/process.c (create_process):
* src/sysdep.c (sys_subshell) [!DOS_NT || !WINDOWSNT]:
Use emacs_perror for simplicity.
* src/callproc.c (relocate_fd, main):
* src/sysdep.c (sys_subshell):
Exit with EXIT_CANCELED etc., not 1, when exec setup fails.
(shut_down_emacs): Use emacs_write, not write.
* src/emacs.c, src/sysdep.c: Don't include <ignore-value.h>.
* src/fileio.c (Fcopy_file, e_write):
* src/nsterm.m (ns_select):
* src/process.c (send_process):
* src/sound.c (vox_write):
Use emacs_write_sig, not emacs_write.
* src/lisp.h (emacs_write_sig, emacs_perror): New decls.
* src/process.h (EXIT_CANCELED), EXIT_CANNOT_INVOKE, EXIT_ENOENT):
New constants.
* src/sysdep.c (emacs_backtrace): Use emacs_write, not ignore_value
of write.
(emacs_full_write): New function.
(emacs_write): Rewrite to use it.
(emacswrite_sig, emacs_perror): New functions.
* src/xrdb.c (fatal): Don't invoke perror, since errno might be garbage.
This simplifies Emacs a bit, since it no longer needs to worry
about closing file descriptors by hand in some cases.
It also fixes some unlikely races. Not all such races, as
libraries often open files internally without setting
close-on-exec, but it's an improvement.
* admin/merge-gnulib (GNULIB_MODULES): Add fcntl, pipe2.
(GNULIB_TOOL_FLAGS): Avoid binary-io, close. Do not avoid fcntl.
* configure.ac (mkostemp): New function to check for.
(PTY_OPEN): Pass O_CLOEXEC to posix_openpt.
* lib/fcntl.c, lib/getdtablesize.c, lib/pipe2.c, m4/fcntl.m4:
* m4/getdtablesize.m4, m4/pipe2.m4: New files, taken from gnulib.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* nt/gnulib.mk: Remove empty gl_GNULIB_ENABLED_verify section;
otherwise, gnulib-tool complains given close-on-exec changes.
* nt/inc/ms-w32.h (pipe): Remove.
* nt/mingw-cfg.site (ac_cv_func_fcntl, gl_cv_func_fcntl_f_dupfd_cloexec)
(gl_cv_func_fcntl_f_dupfd_works, ac_cv_func_pipe2): New vars.
* src/alloc.c (valid_pointer_p) [!WINDOWSNT]:
* src/callproc.c (Fcall_process) [!MSDOS]:
* src/emacs.c (main) [!DOS_NT]:
* src/nsterm.m (ns_term_init):
* src/process.c (create_process):
Use 'pipe2' with O_CLOEXEC instead of 'pipe'.
* src/emacs.c (Fcall_process_region) [HAVE_MKOSTEMP]:
* src/filelock.c (create_lock_file) [HAVE_MKOSTEMP]:
Prefer mkostemp with O_CLOEXEC to mkstemp.
* src/callproc.c (relocate_fd) [!WINDOWSNT]:
* src/emacs.c (main): Use F_DUPFD_CLOEXEC, not plain F_DUPFD.
No need to use fcntl (..., F_SETFD, FD_CLOEXEC), since we're
now using pipe2.
* src/filelock.c (create_lock_file) [! HAVE_MKOSTEMP]:
Make the resulting file descriptor close-on-exec.
* src/lisp.h, src/lread.c, src/process.c (close_load_descs, close_process_descs):
* src/lread.c (load_descriptor_list, load_descriptor_unwind):
Remove; no longer needed. All uses removed.
* src/process.c (SOCK_CLOEXEC): Define to 0 if not supplied by system.
(close_on_exec, accept4, process_socket) [!SOCK_CLOEXEC]:
New functions.
(socket) [!SOCK_CLOEXEC]: Supply a substitute.
(Fmake_network_process, Fnetwork_interface_list):
(Fnetwork_interface_info, server_accept_connection):
Make newly-created socket close-on-exec.
* src/sysdep.c (emacs_open, emacs_fopen):
Make new-created descriptor close-on-exec.
* src/w32.c (fcntl): Support F_DUPFD_CLOEXEC well enough for Emacs.
* src/w32.c, src/w32.h (pipe2): Rename from 'pipe', with new flags arg.
Fixes: debbugs:14803
2013-05-15 manywarnings: update for GCC 4.8.0
2013-05-15 stdio: use __REDIRECT for fwrite, fwrite_unlocked
2013-05-15 sig2str, stdio, warnings: port to clang
* configure.ac: Remove -with-acl option, since Gnulib does that for
us now.
(LIBACL_LIBS): Remove; no longer needed.
* lib/Makefile.am (CLEANFILES, SUFFIXES): New (empty) macros,
for the benefit of the new ACL implementation.
* lib/makefile.w32-in (GNULIBOBJS): Add $(BLD)/acl-errno-valid.$(O).
($(BLD)/acl-errno-valid.$(O)): New rule.
* lib/acl-errno-valid.c, lib/acl-internal.h, lib/acl.h:
* lib/acl_entries.c, lib/errno.in.h, lib/file-has-acl.c:
* lib/qcopy-acl.c, lib/qset-acl.c, m4/acl.m4, m4/errno_h.m4:
New files, taken from gnulib.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* admin/merge-gnulib (GNULIB_MODULES): Add qacl.
(GNULIB_TOOL_FLAGS): Do not avoid errno.
* etc/NEWS: Emacs is no longer limited to POSIX ACLs. --disable-acl,
not --without-acl, since we're now using Gnulib's implementation.
* nt/config.nt (HAVE_ACL_SET_FILE): Rename from HAVE_POSIX_ACL.
* nt/inc/ms-w32.h (EOPNOTSUPP): New macro.
* src/Makefile.in (LIB_ACL): New macro.
(LIBACL_LIBS): Remove.
(LIBES): Use LIB_ACL, not LIBACL_LIBS.
* src/fileio.c: Include <acl.h>.
Use HAVE_ACL_SET_FILE rather than HAVE_POSIX_ACL.
(ACL_NOT_WELL_SUPPORTED): Remove. All uses replaced by
!acl_errno_valid.
(Fcopy_file) [!WINDOWSNT]: Use qcopy_acl instead of rolling
it ourselves.
Fixes: debbugs:14295
This bug was introduced by my 2013-02-25 change that simplified
data_start configuration. Without this change, on GNU/Linux
an Emacs configured with --enable-profiling fails immediately
due to a profiler signal.
* configure.ac (LD_SWITCH_SYSTEM_TEMACS): Append -pg if profiling
and if not on GNU/Linux or FreeBSD.
* lib/Makefile.am (AM_CFLAGS): Add $(PROFILING_CFLAGS), so that
lib/*.o is profiled too.
* src/Makefile.in: Compile with $(PROFILING_CFLAGS), but do not link
with these flags. On platforms where special flags are needed
when linking temacs, the flags are now in LD_SWITCH_SYSTEM_TEMACS.
(ALL_CFLAGS): Remove $(PROFILING_CFLAGS).
(.c.o, .m.o): Compile with $(PROFILING_CFLAGS).
Fixes: debbugs:13783
* admin/CPP-DEFINES (BSD_SYSTEM, HAVE_FSYNC): Remove.
* admin/merge-gnulib (GNULIB_MODULES): Add fsync, fdatasync.
* configure.ac (BSD_SYSTEM, BSD_SYSTEM_AHB): Remove; no longer needed.
(fsync): Remove check; now done by gnulib.
* lib/fdatasync.c, lib/fsync.c, m4/fdatasync.m4, m4/fsync.m4:
New files, from gnulib.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* lib-src/Makefile.in (LIB_FDATASYNC): New macro.
(emacsclient${EXEEXT}): Use it.
* lib-src/emacsclient.c (main): Use fdatasync, not fsync, since we don't
care about metadata. Keep trying if interrupted.
* lib-src/movemail.c (main, popmail): Don't worry about BSD_SYSTEM, since
fsync is available everywhere (or there is a substitute). Don't
report an error if fsync returns EINVAL.
* nt/inc/ms-w32.h (fdatasync): New macro, suggested by Eli Zaretskii.
* src/Makefile.in (LIB_FDATASYNC): New macro.
(LIBES): Use it.
* src/conf_post.h (BSD_SYSTEM, BSD_SYSTEM_AHB): Remove; no longer needed.
* src/fileio.c (Fwrite_region, write_region_inhibit_fsync):
Don't worry about HAVE_FSYNC, since a substitute fsync is
available if the system lacks one.
(Fwrite_regin): Retry fsync if interrupted.
Fixes: debbugs:13944
This incorporates:
2013-03-12 mktime: fix configure typo
2013-03-11 regex: port to mingw's recent addition of undeclared alarm
2013-03-11 putenv: avoid compilation warning on mingw
2013-03-11 unistd: don't prevent Tru64 Unix from using gnulib strtod.
2013-02-21 putenv: port better to native Windows
2013-02-18 extern-inline: avoid compilation error with HP-UX cc
2013-02-14 putenv: fix heap corruption with mixed putenv/_putenv
On my host, this speeds up directory-files-and-attributes by a
factor of 3, when applied to Emacs's src directory.
These functions are standardized by POSIX and are common these
days; fall back on a (slower) gnulib implementation if the host
is too old to supply them.
* .bzrignore: Add lib/dirent.h.
* lib/Makefile.am (libgnu_a_SOURCES): Add openat-die.c, save-cwd.c.
* lib/careadlinkat.c, lib/careadlinkat.h: Merge from gnulib,
incorporating: 2013-01-29 careadlinkat: do not provide careadlinkatcwd.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* lib/dirent.in.h, lib/fdopendir.c, lib/fstatat.c, lib/openat-priv.h:
* lib/openat-proc.c, lib/openat.h, m4/dirent_h.m4, m4/fdopendir.m4:
* m4/fstatat.m4: New files, from gnulib.
* lib/openat-die.c, lib/save-cwd.c, lib/save-cwd.h: New files.
These last three are specific to Emacs and are not copied from gnulib.
They are simpler than the gnulib versions and are tuned for Emacs.
* admin/merge-gnulib (GNULIB_MODULES): Add fdopendir, fstatat, readlinkat.
(GNULIB_TOOL_FLAGS): Do not avoid at-internal, openat-h.
Avoid dup, open, opendir.
* nt/inc/sys/stat.h (fstatat):
* nt/inc/unistd.h (readlinkat): New decls.
* src/conf_post.h (GNULIB_SUPPORT_ONLY_AT_FDCWD): Remove.
* src/dired.c: Include <fcntl.h>.
(open_directory): New function, which uses open and fdopendir
rather than opendir. DOS_NT platforms still use opendir, though.
(directory_files_internal, file_name_completion): Use it.
(file_attributes): New function, with most of the old Ffile_attributes.
(directory_files_internal, Ffile_attributes): Use it.
(file_attributes, file_name_completion_stat): First arg is now fd,
not dir name. All uses changed. Use fstatat rather than lstat +
stat.
(file_attributes): Use emacs_readlinkat rather than Ffile_symlink_p.
* src/fileio.c: Include <allocator.h>, <careadlinkat.h>.
(emacs_readlinkat): New function, with much of the old
Ffile_symlink_p, but with an fd argument for speed.
It uses readlinkat rather than careadlinkatcwd, so that it
need not assume the working directory.
(Ffile_symlink_p): Use it.
* src/filelock.c (current_lock_owner): Use emacs_readlinkat
rather than emacs_readlink.
* src/lisp.h (emacs_readlinkat): New decl.
(READLINK_BUFSIZE, emacs_readlink): Remove.
* src/sysdep.c: Do not include <allocator.h>, <careadlinkat.h>.
(emacs_norealloc_allocator, emacs_readlink): Remove.
This stuff is moved to fileio.c.
* src/w32.c (fstatat, readlinkat): New functions.
(careadlinkat): Don't check that fd == AT_FDCWD.
(careadlinkatcwd): Remove; no longer needed.
Fixes: debbugs:13539
* admin/merge-gnulib (GNULIB_MODULES): Add putenv, unsetenv.
* lib/putenv.c, lib/unsetenv.c, m4/putenv.m4, m4/setenv.m4:
New files, copied automatically from gnulib.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* src/alloc.c (xputenv): New function.
* src/dbusbind.c (Fdbus_init_bus):
* src/emacs.c (main):
* src/xterm.c (x_term_init):
Use xputenv instead of setenv or putenv, to detect memory exhaustion.
* src/editfns.c (initial_tz): Move static var decl up.
(tzvalbuf_in_environ): New static var.
(init_editfns): Initialize these two static vars.
(Fencode_time): Don't assume arbitrary limit on EMACS_INT width.
Save old TZ value on stack, if it's small.
(Fencode_time, set_time_zone_rule): Don't modify 'environ' directly;
instead, use xputenv+unsetenv to set and restore TZ.
(environbuf): Remove static var. All uses removed.
(Fset_time_zone_rule): Do not save TZ and environ;
no longer needed here.
(set_time_zone_rule_tz1, set_time_zone_rule_tz2) [LOCALTIME_CACHE]:
Move to inside set_time_zone_rule; they don't need file scope any more.
(set_time_zone_rule): Maintain the TZ=value string separately.
(syms_of_editfns): Don't initialize initial_tz;
init_editfns now does it.
* src/emacs.c (dump_tz) [HAVE_TZSET]: Now const.
* src/lisp.h (xputenv): New decl.
Fixes: debbugs:13070
Exceptions: do not assume SIGCONT, SIGSTOP, SIGTSTP, SIGTTIN,
SIGTTOU, SIGUSR1, SIGUSR2, as Microsoft platforms lack these.
* admin/CPP-DEFINES (SIGALRM, SIGCHLD, SIGHUP, SIGKILL, SIGPIPE, SIGQUIT):
Remove.
(SIGTRAP): Remove this one too, as config.h no longer defines it.
* admin/merge-gnulib (GNULIB_MODULES): Add sig2str.
* configure.ac (PTY_OPEN, PTY_TTY_NAME_SPRINTF):
Use SIGCHLD rather than SIGCLD.
* lib/sig2str.c, lib/sig2str.h, m4/sig2str.m4: New files, from gnulib.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* lib/makefile.w32-in (GNULIBOBJS): Add $(BUILD)/sig2str.$(O).
* src/process.c [subprocesses]: Include <c-ctype.h>, <sig2str.h>.
(deleted_pid_list, Fdelete_process, create_process)
(record_child_status_change, handle_child_signal, deliver_child_signal)
(init_process_emacs, syms_of_process):
Assume SIGCHLD is defined.
(parse_signal): Remove. All uses removed.
(abbr_to_signal): New static function.
(Fsignal_process): Use it to convert signal names to ints.
* src/sysdep.c (sys_suspend) [!DOS_NT]: Use kill (0, ...) rather than
kill (getpgrp (), ...).
(emacs_sigaction_init): Assume SIGCHLD is defined.
(init_signals): Assume SIGALRM, SIGCHLD, SIGHUP, SIGKILL,
SIGPIPE, and SIGQUIT are defined. Do not worry about SIGCLD any more.
* src/syssignal.h (EMACS_KILLPG): Remove.
All uses replaced by 'kill' with a negative pid.
(SIGCHLD): Remove definition, as we now assume SIGCHLD.
* src/w32proc.c (sys_kill): Support negative pids compatibly with POSIX.
Fixes: debbugs:13026
* admin/CPP-DEFINES (O_RDONLY, O_RDWR, HAVE_FCNTL_H): Remove.
* admin/merge-gnulib (GNULIB_MODULES): Add fcntl-h.
* configure.ac: Do not check for fcntl.h.
* lib/gnulib.mk: Regenerate.
* lib-src/movemail.c, lib-src/update-game-score.c: Assume <fcntl.h> exists.
* nt/inc/sys/socket.h (O_NONBLOCK): Rename from O_NDELAY, since the
POSIX name for this flag is O_NONBLOCK. All uses changed.
* nt/inc/unistd.h (O_RDWR, O_NOCTTY): New macros. Like AT_FDCWD etc.
these really should be moved to a replacement <fcntl.h> if and
when that gets implemented. In the meantime, include <fcntl.h>
to make sure we don't override its definitions.
* src/callproc.c (relocate_fd): Assume F_DUPFD.
* src/emacs.c, src/term.c (O_RDWR): Remove.
* src/keyboard.c (tty_read_avail_input): Use O_NONBLOCK rather than
O_NDELAY, since O_NONBLOCK is the standard name for this flag.
* src/nsterm.m: Assume <fcntl.h> exists.
* src/process.c (NON_BLOCKING_CONNECT, allocate_pty, create_process)
(create_pty, Fmake_network_process, server_accept_connection)
(wait_reading_process_output, init_process_emacs):
Assume O_NONBLOCK.
(wait_reading_process_output): Put in a special case for WINDOWSNT
to mimick the older behavior where it had O_NDELAY but not O_NONBLOCK.
It's not clear this is needed, but it's a more-conservative change.
(create_process): Assume FD_CLOEXEC.
(create_process, create_pty): Assume O_NOCTTY.
* src/sysdep.c (init_sys_modes, reset_sys_modes): Assume F_SETFL.
(reset_sys_modes): Use O_NONBLOCK rather than O_NDELAY.
Omit if not DOS_NT, since F_GETFL is not defined there.
(serial_open): Assume O_NONBLOCK and O_NOCTTY.
* src/term.c: Include <fcntl.h>, for flags like O_NOCTTY.
(O_NOCTTY): Remove.
(init_tty): Assume O_IGNORE_CTTY is defined to 0 on platforms that
lack it, since gnulib guarantees this.
* src/w32.c (fcntl): Test for O_NONBLOCK rather than O_NDELAY.
Fixes: debbugs:12881
This fixes a bug that has been present in Emacs since its creation.
It was reported by Chris Torek in 1983 even before GNU Emacs existed,
which must set some sort of record. (Torek's bug report was against
a predecessor of GNU Emacs, but GNU Emacs happened to have the
same common flaw.) See Torek's Usenet posting
"setuid/setgid programs & Emacs" Article-I.D.: sri-arpa.858
Posted: Fri Apr 8 14:18:56 1983.
* .bzrignore: Add lib/fcntl.h.
* configure.ac (euidaccess): Remove check; gnulib does this for us now.
(gl_FCNTL_O_FLAGS): Define a dummy version.
* lib/at-func.c, lib/euidaccess.c, lib/faccessat.c, lib/fcntl.in.h:
* lib/getgroups.c, lib/group-member.c, lib/root-uid.h:
* lib/xalloc-oversized.h, m4/euidaccess.m4, m4/faccessat.m4:
* m4/fcntl_h.m4, m4/getgroups.m4, m4/group-member.m4:
New files, from gnulib.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* admin/merge-gnulib (GNULIB_MODULES): Add faccessat.
(GNULIB_TOOL_FLAGS): Avoid at-internal, fchdir, malloc-posix,
openat-die, openat-h, save-cwd. Do not avoid fcntl-h.
Omit gnulib's m4/fcntl-o.m4.
* nt/inc/ms-w32.h (AT_FDCWD, AT_EACCESS): New symbols.
(access): Remove.
(faccessat): New macro.
* src/Makefile.in (LIB_EACCESS): New macro.
(LIBES): Use it.
* src/callproc.c (init_callproc):
* src/charset.c (init_charset):
* src/fileio.c (check_existing, check_executable, check_writable)
(Ffile_readable_p):
* src/lread.c (openp, load_path_check):
* src/process.c (allocate_pty):
* src/xrdb.c (file_p):
Use effective UID when checking permissions, not real UID.
* src/callproc.c (init_callproc):
* src/charset.c (init_charset):
* src/lread.c (load_path_check, init_lread):
Test whether directories are accessible, not merely whether they exist.
* src/conf_post.h (GNULIB_SUPPORT_ONLY_AT_FDCWD): New macro.
* src/fileio.c (check_existing, check_executable, check_writable)
(Ffile_readable_p):
Use symbolic names instead of integers for the flags, as they're
portable now.
(check_writable): New arg AMODE. All uses changed.
Set errno on failure.
(Ffile_readable_p): Use faccessat, not stat + open + close.
(Ffile_writable_p): No need to call check_existing + check_writable.
Just call check_writable and then look at errno. This saves a syscall.
dir should never be nil; replace an unnecessary runtime check
with an eassert. When checking the parent directory of a nonexistent
file, check that the directory is searchable as well as writable, as
we can't create files in unsearchable directories.
(file_directory_p): New function, which uses 'stat' on most platforms
but faccessat with D_OK (for efficiency) if WINDOWSNT.
(Ffile_directory_p, Fset_file_times): Use it.
(file_accessible_directory_p): New function, which uses a single
syscall for efficiency.
(Ffile_accessible_directory_p): Use it.
* src/xrdb.c (file_p): Use file_directory_p.
* src/lisp.h (file_directory_p, file_accessible_directory_p): New decls.
* src/lread.c (openp): When opening a file, use fstat rather than
stat, as that avoids a permissions race. When not opening a file,
use file_directory_p rather than stat.
(dir_warning): First arg is now a usage string, not a format.
Use errno. All uses changed.
* src/nsterm.m (ns_term_init): Remove unnecessary call to file-readable
that merely introduced a race.
* src/process.c, src/sysdep.c, src/term.c: All uses of '#ifdef O_NONBLOCK'
changed to '#if O_NONBLOCK', to accommodate gnulib O_* style,
and similarly for the other O_* flags.
* src/w32.c (sys_faccessat): Rename from sys_access and switch to
faccessat's API. All uses changed.
* src/xrdb.c: Do not include <sys/stat.h>; no longer needed.
(magic_db): Rename from magic_file_p.
(magic_db, search_magic_path): Return an XrmDatabase rather than a
char *, so that we don't have to test for file existence
separately from opening the file for reading. This removes a race
fixes a permission-checking problem, and simplifies the code.
All uses changed.
(file_p): Remove; no longer needed.
Fixes: debbugs:12632
* admin/merge-gnulib (GNULIB_MODULES): Add close-stream.
* lib/close-stream.c, lib/close-stream.h, lib/fpending.c
* lib/fpending.h, m4/close-stream.m4, m4/fpending.m4:
New files, from gnulib.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* src/emacs.c: Include <close-stream.h>.
(close_output_streams): New function.
(main): Pass it to atexit, so that Emacs closes stdout and stderr
and handles errors appropriately.
(Fkill_emacs): Don't worry about flushing, as close_output_stream
does that now.
Fixes: debbugs:9574
This should fix an OS X build problem reported by Ivan Andrus in
<http://lists.gnu.org/archive/html/emacs-devel/2012-09/msg00671.html>.
* admin/merge-gnulib (GNULIB_MODULES): Add timer-time.
* configure.ac (gl_THREADLIB): Define to empty, since Emacs
does threads its own way.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* m4/timer_time.m4: New file, from gnulib.
* src/atimer.c (alarm_timer, alarm_timer_ok, set_alarm, init_atimer):
Use HAVE_TIMER_SETTIME, not SIGEV_SIGNAL, to decide whether to
call timer_settime.
Merge from gnulib, incorporating:
2012-08-24 execinfo: port to FreeBSD
2012-08-22 execinfo: new module
* admin/merge-gnulib (GNULIB_MODULES): Add execinfo.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* lib/execinfo.c, lib/execinfo.in.h, m4/execinfo.m4: New files.
* src/alloc.c [ENABLE_CHECKING]: Include <execinfo.h>.
(die) [ENABLE_CHECKING]: Print a backtrace if available.
* src/Makefile.in (LIB_EXECINFO): New macro.
(LIBES): Use it.
* nt/inc/ms-w32.h: Move here from ../src/s.
* nt/config.nt (config_opsysfile): Change to <ms-w32.h>.
* s/ms-w32.h: Move to ../nt/inc.
* src/makefile.w32-in (TAGS, TAGS-gmake, MS_W32_H):
Update for new ms-w32.h location.
* lib-src/makefile.w32-in (MS_W32_H): Update for new ms-w32.h location.
* lib/makefile.w32-in (MS_W32_H): Update for new ms-w32.h location.
* lisp/emacs-lisp/authors.el (authors-renamed-files-alist): Add ms-w32.h.
2012-08-01 extern-inline: new module
2012-08-01 stat-time, timespec, u64, utimens: use extern-inline
* lib/stat-time.c, lib/utimespec.c, lib/u64.c, m4/extern-inline.m4:
New files. The new .c files are for instantiating extern inline
functions.
Fixes: debbugs:12116
* lisp/org/ob-lilypond.el (ly-w32-ly-path): Rename from ly-win32-ly-path.
(ly-w32-pdf-path): Rename from ly-win32-pdf-path.
(ly-w32-midi-path): Rename from ly-win32-midi-path.
(ly-determine-ly-path, ly-determine-pdf-path, ly-determine-midi-path):
Check for "windows-nt", not "win32", in system-type.
* src/regex.c (MAX_BUF_SIZE): Remove some incorrect and
long-ago-commented-out code that talks about "WIN32".
* src/w32heap.h (OS_WINDOWS_95): Rename from OS_WIN95.
All uses changed.
* .bzrignore: Add lib/stdalign.h.
* config.bat: Do not set NO_DECL_ALIGN; no longer needed.
Copy lib/stdalign.in.h to lib/stdalign.in-h as needed.
* configure.ac (HAVE_ATTRIBUTE_ALIGNED): Remove the code that
fiddles with this, as gnulib now does this for us.
* admin/merge-gnulib: Add environ, stdalign.
* m4/environ.m4: New file, from gnulib.
* lib/gnulib.mk, m4/gnulib-comp.m4: Regenerate.
* lib/stdalign.in.h, m4/stdalign.m4: New files, from gnulib.
* sed2v2.inp (HAVE_ATTRIBUTE_ALIGNED): Remove edit.
* sedlibmk.inp (STDALIGN_H, @GL_GENERATE_STDALIGN_H_TRUE@)
(GL_GENERATE_STDALIGN_H_FALSE): New edits.
* nt/config.nt (HAVE_ATTRIBUTE_ALIGNED): Remove.
* src/alloc.c (XMALLOC_BASE_ALIGNMENT, GC_POINTER_ALIGNMENT, pure_alloc):
Simplify by using alignof.
(pure_alloc) [! USE_LSB_TAG]: Don't over-align EMACS_INT values.
* src/lisp.h: Include <stdalign.h>.
(GCALIGNMENT): New macro and constant.
(DECL_ALIGN): Remove. All uses replaced by alignas (GCALIGNMENT).
(USE_LSB_TAG): ifdef on alignas, not on DECL_ALIGN.
(stdalign): New macro, if not already defined.
Merge from gnulib to make "#define unix" unnecessary, incorporating:
2012-07-10 getloadavg: clean out old Emacs and Autoconf cruft
2012-07-09 getopt: Simplify after Emacs changed.
* src/s/aix4-2.h (unix): Remove; no longer needed.
lib/makefile.w32-in ($(GNULIBOBJS)): Depend on stamp_BLD. This
replaces separate dependency for each object file, which required
the same object file to be mentioned twice, causing failures in
parallel builds.
lisp/makefile.w32-in (compile, compile-always): Depend on
update-subdirs, not on subdirs.el. Otherwise, several different
sub-targets of 'bootstrap' running in parallel could
simultaneously write to subdirs.el, producing a garbled file.
lib/makefile.w32-in ($(BLD)/dtotimespec.$(O)):
($(BLD)/timespec-add.$(O)):
($(BLD)/timespec-sub.$(O)): Don't depend on
$(EMACS_ROOT)/nt/inc/sys/time.h.
lib/stat-time.h:
lib/timespec.h:
lib/utimens.h: Revert last change.
src/makefile.w32-in (TIMESPEC_H): Remove nt/inc/sys/time.h.
(SYSTIME_H): Add nt/inc/sys/time.h.
src/systime.h [WINDOWSNT]: Include sys/time.h.
src/s/ms-w32.h (struct timespec): Definition moved from
nt/inc/sys/time.h. Suggested by Paul Eggert <eggert@cs.ucla.edu>.
nt/inc/sys/time.h (struct timespec): Don't define it here, it is
now defined in src/s/ms-w32.h.
Fixes: debbugs:9000
lib/makefile.w32-in ($(BLD)/md5.$(O)):
($(BLD)/sha1.$(O)):
($(BLD)/sha256.$(O)):
($(BLD)/sha512.$(O)): Depend on $(EMACS_ROOT)/nt/inc/stdalign.h.
Suggested by Christoph Scholtes <cschol2112@googlemail.com>.
lib/getopt_.h: Regenerate.
nt/inc/stdalign.h: New file.
Fixes: debbugs:11527
* configure.in: Remove all mention of src/m/*.
(machine, machfile, M_FILE, config_machfile, and_machfile): Remove.
All uses removed.
(BITS_PER_CHAR, BITS_PER_SHORT, BITS_PER_INT, BITS_PER_LONG)
(BITS_PER_LONG_LONG): Move to src/lisp.h.
* lib/makefile.w32-in: Remove dependencies on
$(EMACS_ROOT)/src/m/intel386.h.
* make-dist: Don't make links to src/m.
* admin/CPP-DEFINES: Do not mention src/m/*.h.
(BITS_PER_EMACS_INT, BITS_PER_LONG, BITS_PER_CHAR)
(BITS_PER_SHORT, BITS_PER_INT): Remove.
* admin/MAINTAINERS: Remove src/m/.
* lib-src/makefile.w32-in: Remove dependencies on
$(EMACS_ROOT)/src/m/intel386.h.
* msdos/mainmake.v2 (TAGS tags): Don't look at $(CURDIR)/src/m/intel386.h.
* nt/config.nt: Do not include "m/intel386.h"; file was removed.
(BITS_PER_CHAR, BITS_PER_SHORT, BITS_PER_INT, BITS_PER_LONG):
Move to src/lisp.h.
(EMACS_INT_MAX): New macro.
This directory predates autoconf and is no longer needed nowadays.
Move its few remaining bits of functionality to where they're needed.
* src/m/README, src/m/alpha.h, src/m/amdx86-64.h, src/m/ia64.h, src/m/ibmrs6000.h:
* src/m/ibms390x.h, src/m/intel386.h, src/m/m68k.h, src/m/macppc.h:
* src/m/sparc.h, src/m/template.h: Remove.
* src/Makefile.in (M_FILE): Remove. All uses removed.
* src/alloc.c (POINTERS_MIGHT_HIDE_IN_OBJECTS):
* src/lisp.h (USE_LSB_TAG):
* src/mem-limits.h (EXCEEDS_LISP_PTR):
Use VAL_MAX, not VALBITS, in #if.
* src/lisp.h (EMACS_INT_MAX): New macro, useful in #if.
(EMACS_UINT): Define unconditionally now.
(BITS_PER_CHAR, BITS_PER_SHORT, BITS_PER_INT, BITS_PER_LONG)
(BITS_PER_EMACS_INT): New constants, replacing
what used to be in config.h, but not useful in #if.
(GCTYPEBITS, VALBITS): Define unconditionally, since m/* files don't
define them any more.
(VAL_MAX): New macro.
(VALMASK): Use it.
* src/puresize.h (PURESIZE_RATIO): Use EMACS_INT_MAX, not
BITS_PER_EMACS_INT, in #if.
* src/s/aix4-2.h (BROKEN_FIONREAD, BROKEN_SIGAIO, BROKEN_SIGPTY)
(BROKEN_SIGPOLL): Move here from m/ibmrs6000.h, which was removed.
* src/s/gnu-linux.h (ULIMIT_BREAK_VALUE) [__i386__]:
* src/s/ms-w32.h (DATA_START):
Move here from removed file m/intel386.h.
* src/s/gnu.h (NLIST_STRUCT): Remove undef; 'configure' does this.
* src/s/irix6-5.h (_LP64): Remove; lisp.h no longer needs this.
dated 2011-10-07. Regenerating from current gnulib would be a
pervasive change, and currently the trunk isn't open to such changes.
* configure.in (WARN_CFLAGS): Remove; no longer needed now
that gnulib does it.
* lib/gnulib.mk, m4/gl-comp.m4: Regenerate.
I have been using this change for many months in my private copy
of Emacs, and have used it to find several bugs. It's mature
enough to publish now.
* Makefile.in (GNULIB_MODULES): Add warnings, manywarnings.
* configure.in: Support --enable-gcc-warnings, in the style of
other GNU packages such as coreutils.
(C_WARNINGS_SWITCH): Remove, replacing with...
(WARN_CFLAGS, GNULIB_WARN_CFLAGS): New variable.
(PKG_CHECK_MODULES, C_SWITCH_X_SITE): Use -isystem rather than -I,
when including system files with GCC.
* etc/NEWS: Mention --enable-gcc-warnings.
* lib/Makefile.am (AM_CFLAGS): New macro.
* m4/manywarnings.m4, m4/warnings.m4: New files, from gnulib.
* lib-src/Makefile.in (C_WARNINGS_SWITCH): Remove.
(WARN_CFLAGS, WERROR_CFLAGS): New macros.
(BASE_CFLAGS): Use new macros rather than old.
* lwlib/Makefile.in (C_WARNINGS_SWITCH): Remove.
(WARN_CFLAGS, WERROR_CFLAGS): New macros.
(ALL_CFLAGS): Use new macros rather than old.
* oldXMenu/Makefile.in (C_WARNINGS_SWITCH): Remove.
(WARN_CFLAGS, WERROR_CFLAGS): New macros.
(ALL_CFLAGS): Use new macros rather than old.
* src/Makefile.in (C_WARNINGS_SWITCH): Remove.
(WARN_CFLAGS, WERROR_CFLAGS): New macros.
(ALL_CFLAGS): Use new macros rather than old.
* src/process.c: Ignore -Wstrict-overflow to work around GCC bug 52904.
* src/regex.c: Ignore -Wstrict-overflow. If !emacs, also ignore
-Wunused-but-set-variable, -Wunused-function, -Wunused-macros,
-Wunused-result, -Wunused-variable. This should go away once
the Emacs and Gnulib regex code is merged.
(xmalloc, xrealloc): Now static.
nt/makefile.w32-in: (all): Don't depend on stamp_BLD and on maybe-bootstrap.
(all-other-dirs-$(MAKETYPE)): Depend on maybe-bootstrap.
(bootstrap-gmake): Invoke the "clean" and build targets in 2
separate commands, so they run in that order even under "make -j".
lib/makefile.w32-in (gnulib, all): Don't depend on stamp_BLD.
lib-src/makefile.w32-in (ALL): Now the list of executables, not of phony
targets.
(.PHONY): Only make-docfile is its prerequisite now.
(make-docfile): Don't depend on stamp_BLD. Add a comment about
the need in this target.
(ctags, etags, ebrowse, hexl, movemail, emacsclient)
(test-distrib): Phony targets removed.
($(BLD)/test-distrib.exe): Run test-distrib as part of the recipe.
(all): Don't depend on stamp_BLD.
specific makefiles to support getopt_.h generation with MSVC.
* nt/gmake.defs (PRAGMA_SYSTEM_HEADER): Add for GCC.
* nt/nmake.defs (PRAGMA_SYSTEM_HEADER): Add, but ignore with MSVC.
Bug reported by Chong Yidong for SunOS 5.10 Generic_127111-11 sparc.
I cannot reproduce it on SunOS 5.10 Generic_141444-09 sparc but
possibly this is because Sun fixed the 'stat' bug in my version.
* Makefile.in (GNULIB_TOOL_FLAGS): Do not avoid the pathmax module.
* lib/pathmax.h, m4/pathmax.m4: New files, from gnulib.
* lib/gnulib.mk, m4/gl-comp.m4: Regenerate.
These changes are based on gnulib version
4f11d6bebc3098c64ffde27079ab0d0cecfd0cdc dated 2011-10-07 20:59:10,
because Emacs is in feature freeze and we do not want to merge any
more-recent changes from gnulib.
Small portions of the changes by Fabrice Popineau <fabrice.popineau@supelec.fr>.
src/makefile.w32-in (TAGS-gmake): Don't use $(patsubst ...), as
Nmake barfs on that. Use $(OBJ*_c) variables instead, defined on
nt/gmake.defs.
src/lisp.h (ENUM_BF): New macro, for enumerated types in bitfields,
which are not supported by MSVC.
(Lisp_Symbol, Lisp_Misc_Any, Lisp_Marker, Lisp_Misc_Overlay)
(Lisp_Save_Value, Lisp_Free): Use ENUM_BF for enumerated types in
bitfields.
(Lisp_Object) [USE_LISP_UNION_TYPE]: Use ENUM_BF for enumerated
types in bitfields.
(DEFUN) [_MSC_VER]: Define in a different way for MSVC.
src/w32fns.c [_MSC_VER]: DECLARE_HANDLE for any MSVC version.
src/w32.c: Don't include w32api.h for MSVC.
(init_environment) [_MSC_VER]: Call sys_access, not _access.
src/s/ms-w32.h <sigset_t, ssize_t> [_MSC_VER]: Typedefs for MSVC.
[_MSC_VER]: Include sys/timeb.h, sys/stat.h, and signal.h.
(fstat, stat, utime) [_MSC_VER]: Redirect to their sys_* cousins.
(malloc, free, realloc, calloc) [_MSC_VER]: Always redirect to the
e_* cousins.
(alloca) [_MSC_VER]: Define to _alloca.
src/lisp.h (DECL_ALIGN) [_MSC_VER]: Define for MSVC.
src/regex.c <re_char> [_MSC_VER]: A separate definition for MSVC.
nt/makefile.w32-in (clean-other-dirs-nmake)
(distclean-other-dirs-nmake, maintainer-clean-other-dirs-nmake):
Update for current structure of doc/ subdirectories.
nt/gmake.defs (OBJ0_c, OBJ1_c, OBJ2_c): New variables.
nt/INSTALL: Update for newer versions of MSVC.
lib/makefile.w32-in (FRC): New dummy target.
(TAGS): Depend on FRC.
Fixes: debbugs:9960
* lib/signal.in.h, lib/sigprocmask.c, m4/gl-comp.m4:
* m4/gnulib-common.m4: Merge from gnulib.
Without this, 'configure' would say "func_gl_gnulib_m4code_pathmax:
command not found" on powerpc-apple-darwin9.8.0.
This clarifies and fixes some licensing issues raised by Glenn Morris
<http://lists.gnu.org/archive/html/bug-gnulib/2011-09/msg00397.html>.
It also merges the latest version of texinfo.tex and has some
MSVC-related changes that don't affect Emacs.
* Makefile.in (GNULIB_TOOL_FLAGS): Avoid msvc-inval, msvc-nothrow,
pathmax, and raise, since these are needed only to address
MSVC-related issues that Emacs doesn't have.
* doc/misc/texinfo.tex, lib/dup2.c, lib/gnulib.mk, lib/signal.in.h:
* lib/sigprocmask.c, lib/stat.c, lib/stdio.in.h, lib/sys_stat.in.h:
* lib/unistd.in.h, m4/dup2.m4, m4/getloadavg.m4, m4/gl-comp.m4:
* m4/include_next.m4, m4/signal_h.m4, m4/signalblocking.m4:
* m4/stdint.m4, m4/stdio_h.m4, m4/sys_stat_h.m4, m4/time_h.m4:
* m4/unistd_h.m4: Merge from gnulib.
* lib/lstat.c, lib/stat.c, m4/include_next.m4, m4/nocrash.m4:
* m4/signal_h.m4, m4/time_h.m4, m4/unistd_h.m4:
Merge from gnulib. This fixes a compilation error on Tru64 UNIX
aka OSF/1 5.1 DTK cc. There is also some mingw stuff here that
doesn't affect Emacs.
* m4/largefile.m4: New file, so that Emacs does not mess up when
accessing files with large inode numbers in MacOS X 10.5 and later.
* m4/nocrash.m4: New file, to avoid triggering background debugger
and/or create core dumps during 'configure'.
* build-aux/move-if-change: Renamed from move-if-change.
* build-aux/snippet/arg-nonnull.h: Renamed from arg-nonnull.h.
* build-aux/snippet/c++defs.h: Renamed from c++defs.h.
* build-aux/snippet/warn-on-use.h: Renamed from warn-on-use.h.
* build-aux/snippet/_Noreturn.h: New file, for draft C1X _Noreturn.
* .bzrignore: The autogenerated files compile, config.guess,
config.sub, depcomp, install-sh, and missing are now in build-aux.
* Makefile.in (epaths-force, sync-from-gnulib):
move-if-change is now in build-aux.
(GNULIB_TOOL_FLAGS): Avoid threadlib; this is now a prerequisite
of gnulib's pthread_sigmask module, but Emacs doesn't need it.
(mkdir): install-sh is now in build-aux.
* config.bat: c++defs.h is now in build-aux/snippets.
* configure.in: Specify AC_CONFIG_AUX_DIR with build-aux (the
usual parameter).
* lib/gnulib.mk, m4/gl-comp.m4: Regenerate.
* lib/makefile.w32-in (ARG_NONNULL_H): arg-nonnull.h moved
to build-aux/snippet.
* lib/pthread_sigmask.c, lib/stdlib.in.h, m4/extensions.m4:
* m4/getopt.m4, m4/gnulib-common.m4, m4/pthread_sigmask.m4:
Merge from gnuilib. This fixes porting bugs on Cygwin, Irix, and
Solaris, enables MacOS extensions, and enables nocrash during
'configure'.
* make-dist: Adjust to new build-aux and build-aux/snippit dirs.
* admin/notes/copyright: The files compile, config.guess, config.sub,
depcomp, install-sh, missing, and move-if-change are now in the
new build-aux subdirectory. The files arg-nonnull.h, c++defs.h,
and warn-on-use.h are now in build-aux/snippets. New file
build-aux/snippets/_Noreturn.h.
* leim/Makefile.in (install): install-sh is now in build-aux.
* lib-src/Makefile.in ($(DESTDIR)${archlibdir}): install-sh moved
to build-aux.
* msdos/sedlibmk.inp (CONFIG_CLEAN_VPATH_FILES): Adjust to snippet moves
from top level to build-aux/snippet.
* src/Makefile.in (gl-stamp): move-if-change is now in build-aux.
* Makefile.in (GNULIB_TOOL_FLAGS): Do not avoid sigprocmask.
* configure.in (AC_TYPE_UID_T): New dummy macro.
Configure gnulib after adjusting LIBS,
so that gnulib can assume the libraries in LIBS.
* lib/pthread_sigmask.c, lib/sigprocmask.c, m4/signalblocking.m4:
New files, automatically imported from gnulib.
* lib/gnulib.mk, m4/gl-comp.m4: Regenerate.
* src/Makefile.in (LIB_PTHREAD_SIGMASK): New macro.
(LIBES): Use it.
* Makefile.in (GNULIB_MODULES): Add pthread_sigmask.
(GNULIB_TOOL_FLAGS): Avoid sigprocmask. Emacs does its own
implementation of 'sigprocmask' on Windows, and it assumes
'sigprocmask' on non-Windows hosts, so it doesn't need the
sigprocmask module.
* lib/signal.in.h, m4/pthread_sigmask.m4, m4/signal_h.m4:
New files, automatically imported from gnulib.
* lib/gnulib.mk, m4/gl-comp.m4: Automatically-imported update
due to the above changes.
* .bzrignore: Add lib/signal.h.
* Makefile.in (GNULIB_MODULES): Add dup2.
* configure.in: Do not check for dup2; gnulib does that now.
* lib/dup2.c, m4/dup2.m4: New files, from gnulib.
* src/sysdep.c (dup2) [!HAVE_DUP2]: Remove; gnulib now does this.
* .bzrignore: Add lib/alloca.h.
* Makefile.in (GNULIB_MODULES): Add alloca-opt.
* configure.in (AC_FUNC_ALLOCA): Remove almost all the alloca stuff,
as gnulib now does that for us. Put alloca check after gl_INIT.
* lib/gnulib.mk, m4/gl-comp.m4: Regenerate.
* lib/alloca.in.h, m4/alloca.m4: New files, from gnulib.
fakemail: Remove dependency on ignore-value.
* Makefile.in (GNULIB_MODULES): Add stdio.
* lib/stdio.in.h, m4/stdio_h.m4: New files, automatically
imported from gnulib.
[lib-src/ChangeLog]
fakemail: Remove dependency on ignore-value.
This undoes some of the recent fakemail-related changes.
It is made possible due to recent changes to gnulib's stdio module.
* Makefile.in (fakemail${EXEEXT}): Do not depend on ignore-value.h.
* fakemail.c: Do not include ignore-value.h.
(put_line): Do not use ignore_value.
Ref: http://lists.gnu.org/archive/html/emacs-devel/2011-03/msg00225.html
* autogen/: New directory, to be excluded from releases.
* autogen/copy_autogen, autogen/update_autogen: New scripts.
* autogen/README: New file.
* autogen/aclocal.m4, autogen/config.in, autogen/configure:
* autogen/Makefile.in: Add auto-updated generated files.
* autogen.sh: No longer a no-op, now it tests for autotools
and runs them as necessary.
* configure.in: Defaule maintainer-mode to on.
* aclocal.m4, configure, lib/Makefile.in: Remove files.
* src/config.in: Remove file.
* INSTALL.BZR, admin/make-tarball.txt: Update instructions.
Work around some portability problems with symlinks.
* Makefile.in (GNULIB_MODULES): Add lstat, readlink, symlink.
* configure.in (lstat, HAVE_LSTAT): Remove special hack.
* lib/lstat.c, lib/readlink.c, lib/stat.c, lib/symlink.c:
* m4/dos.m4, m4/lstat.m4, m4/readlink.m4, m4/stat.m4, m4/symlink.m4:
New files, automatically generated from gnulib.
* aclocal.m4, configure, lib/Makefile.in, lib/gnulib.mk:
* lib/stdlib.in.h, m4/gl-comp.m4, m4/stdlib_h.m4: Regenerate.
2011-02-22 Paul Eggert <eggert@cs.ucla.edu>
[src/ChangeLog]
Work around some portability problems with symlinks.
* fileio.c (Frename_file, Fmake_symbolic_link, Ffile_symlink_p):
Simplify the code by assuming that the readlink and symlink calls
exist, even if they always fail on this host.
(Ffile_readable_p): Likewise, for fifos.
* config.in: Regenerate.
* lib/min-max.h: New file, for "min" and "max".
[lib-src/ChangeLog]
New file "lib/min-max.h".
* ebrowse.c (min, max): Define them by including <min-max.h>
instead of defining it ourselves.
* pop.c (min): Likewise.
nt/inc/stdint.h: New file, to support compilation with tool chains
that do not have stdint.h (e.g. MSVC).
lib/makefile.w32-in: ($(BLD)/md5.$(O)): Added dependency on
$(EMACS_ROOT)/nt/inc/stdint.h.
src/makefile.w32-in: Remove md5.$(O).
($(BLD)/md5.$(O)): Remove prerequisites, moved to
lib/makefile.w32-in.
($(BLD)/fns.$(O)): Depend on $(EMACS_ROOT)/lib/md5.h and on stamp_BLD.
lib/makefile.w32-in ($(BLD)/md5.$(O)): New recipe, moved from
src/makefile.w32-in.
* aclocal.m4, configure, lib/Makefile.in, lib/gnulib.mk, m4/gl-comp.m4:
* src/config.in: Regenerate.
* lib/md5.c, lib/md5.h: Regenerate with simpler version, which
assumes C99-style <stdint.h>, supplied by the stdint module.
* lib/stdint.in.h, m4/longlong.m4, m4/stdint.m4: New files,
generated from gnulib.
* src/deps.mk (fns.o): Do not depend on md5.h, fixing a typo in
the earlier patch.
* Makefile.in (MAKEFILE_MODULES): Add crypto/md5.
* admin/notes/copyright: Remove src/md5.c and src/md5.h as
special cases.
* src/Makefile.in (base_obj): Remove md5.o, since this file
is in lib now.
* src/deps.mk (md5.o): Remove.
* aclocal.m4, configure, lib/Makefile.in, lib/gnulib.mk, m4/gl-comp.m4:
Regenerate.
* lib/md5.c: Regenerate. This renames the file from src/md5.c,
and adds some porting improvements from gnulib.
* lib/md5.h: Regenerate, likwise; rename from src/md5.h.
* m4/md5.m4: New file, from gnulib.
2011-02-18 Paul Eggert <eggert@cs.ucla.edu>
This defines a few preprocessor symbols that should not affect Emacs.
* lib/getopt.in.h, lib/time.in.h, lib/unistd.in.h: Regenerate
via "make sync-from-gnulib".
* configure: Regenerate from the following.
2011-01-30 Paul Eggert <eggert@cs.ucla.edu>
mktime: clarify long_int width checking
* lib/mktime.c (long_int_is_wide_enough): Move this assertion to
the top level, to make it clearer that the assumption about
long_int width is being checked. See
<http://lists.gnu.org/archive/html/bug-gnulib/2011-01/msg00554.html>.
2011-01-29 Paul Eggert <eggert@cs.ucla.edu>
TYPE_MAXIMUM: avoid theoretically undefined behavior
* lib/intprops.h (TYPE_MINIMUM, TYPE_MAXIMUM): Do not shift a
negative number, which the C Standard says has undefined behavior.
In practice this is not a problem, but might as well do it by the book.
Reported by Rich Felker and Eric Blake; see
<http://lists.gnu.org/archive/html/bug-gnulib/2011-01/msg00493.html>.
* m4/mktime.m4 (AC_FUNC_MKTIME): Likewise.
* lib/mktime.c (TYPE_MAXIMUM): Redo slightly to match the others.
mktime: #undef mktime before #defining it
* lib/mktime.c (mktime) [DEBUG]: #undef mktime before #defining it.
mktime: systematically normalize tm_isdst comparisons
* lib/mktime.c (isdst_differ): New function.
(__mktime_internal): Use it systematically for all isdst comparisons.
This completes the fix for libc BZ #6723, and removes the need for
normalizing tm_isdst. See
<http://sourceware.org/bugzilla/show_bug.cgi?id=6723>
(not_equal_tm) [DEBUG]: Use isdst_differ here, too.
mktime: fix some integer overflow issues and sidestep the rest
This was prompted by a bug report by Benjamin Lindner for MinGW
<http://lists.gnu.org/archive/html/bug-gnulib/2011-01/msg00472.html>.
His bug is due to signed integer overflow (0 - INT_MIN), and I
I scanned through mktime.c looking for other integer overflow
problems, fixing all the bugs I found.
Although the C Standard says the resulting code is still not safe
in the presence of integer overflow, in practice it should be good
enough for all real-world two's-complement implementations, except
for debugging environments that deliberately trap on integer
overflow (e.g., gcc -ftrapv).
* lib/mktime.c (WRAPV): New macro.
(SHR): Also check that long_int and time_t shift right in the
usual way, before using the fast-but-unportable method.
(TYPE_ONES_COMPLEMENT, TYPE_SIGNED_MAGNITUDE): Remove, no longer
used. The code already assumed two's complement, so there's
no need to test for alternatives. All uses removed.
(TYPE_MAXIMUM): Don't rely here on overflow behavior not defined by
the C standard. Problem reported by Rich Felker in
<http://lists.gnu.org/archive/html/bug-gnulib/2011-01/msg00488.html>.
(twos_complement_arithmetic): Also check long_int and time_t.
(time_t_avg, time_t_add_ok, time_t_int_add_ok): New functions.
(guess_time_tm, ranged_convert, __mktime_internal): Use them.
(__mktime_internal): Avoid integer overflow with unary subtraction
in two instances where -1 - X is an adequate replacement for -X,
since the calculations are approximate.
2011-01-29 Eric Blake <eblake@redhat.com>
mktime: avoid infinite loop
* m4/mktime.m4 (AC_FUNC_MKTIME): Avoid overflow on possibly-signed
type; behavior is still undefined but portable to all known targets.
Reported by Rich Felker.
2011-01-28 Paul Eggert <eggert@cs.ucla.edu>
mktime: avoid problems on NetBSD 5 / i386
* lib/mktime.c (long_int): New type. This works around a problem
on NetBSD 5 / i386, where 'long int' and 'int' are both 32 bits
but time_t is 64 bits, and where I expect the existing code is
wrong in some cases.
(leapyear, ydhms_diff, guess_time_tm, __mktime_internal): Use it.
(ydhms_diff): Bring back the compile-time check for wide-enough
year and yday.
mktime: fix misspelling in comment
* lib/mktime.c (__mktime_internal): Fix misspelling in comment.
This merges all recent glibc changes of importance.
2011-01-28 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
move-if-change: cope with concurrent mv of identical file.
* move-if-change (CMPPROG): Accept environment
variable as an override for `cmp'.
(usage): Document CMPPROG.
Adjust comparison to drop stdout. Cope with failure of mv if
the target file exists and is identical to the source, for
parallel builds.
Report from H.J. Lu against binutils in PR binutils/12283.
