1
0
mirror of https://git.savannah.gnu.org/git/emacs.git synced 2024-12-10 09:12:15 +00:00
emacs/Makefile.in
Glenn Morris 335142f9f3 Rename configure's --without-compress-info to --without-compress-install
* configure.ac (--without-compress-install):
Rename from --without-compress-info. 

(GZIP_INFO): Remove.
(GZIP_PROG): Allow --without-compress-install to disable it.
* Makefile.in (GZIP_INFO): Remove all references.

* etc/NEWS: Mention this.

Fixes: debbugs:9789
2013-09-08 16:50:23 -07:00

1073 lines
41 KiB
Makefile

### @configure_input@
# Copyright (C) 1992-2013 Free Software Foundation, Inc.
# This file is part of GNU Emacs.
# GNU Emacs is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
### Commentary:
# make all to compile and build Emacs.
# make install to install it.
# make TAGS to update tags tables.
#
# make clean or make mostlyclean
# Delete all files from the current directory that are normally
# created by building the program. Don't delete the files that
# record the configuration. Also preserve files that could be made
# by building, but normally aren't because the distribution comes
# with them.
#
# Delete `.dvi' files here if they are not part of the distribution.
#
# make distclean
# Delete all files from the current directory that are created by
# configuring or building the program. If you have unpacked the
# source and built the program without creating any other files,
# `make distclean' should leave only the files that were in the
# distribution.
#
# make maintainer-clean
# Delete everything from the current directory that can be
# reconstructed with this Makefile. This typically includes
# everything deleted by distclean, plus more: .elc files,
# C source files produced by Bison, tags tables, info files,
# and so on.
#
# make extraclean
# Still more severe - delete backup and autosave files, too.
#
# make bootstrap
# Removes all the compiled files to force a new bootstrap from a
# clean slate, and then build in the normal way.
#
# make docs
# Make Emacs documentation files from their sources; requires makeinfo.
SHELL = @SHELL@
# This may not work with certain non-GNU make's. It only matters when
# inheriting a CDPATH not starting with the current directory.
CDPATH=
# If Make doesn't predefine MAKE, set it here.
@SET_MAKE@
# Prevent submakes from outputting "Entering directory ..." and
# "Leaving directory..." diagnostics that would mess up 'make echo-info'.
QUIET_SUBMAKE = MAKELEVEL=0
# ==================== Things `configure' Might Edit ====================
cache_file = @cache_file@
CONFIGURE_FLAGS = --cache-file=$(cache_file)
CC=@CC@
CFLAGS=@CFLAGS@
LDFLAGS=@LDFLAGS@
CPPFLAGS=@CPPFLAGS@
EXEEXT=@EXEEXT@
### These help us choose version- and architecture-specific directories
### to install files in.
### This should be the number of the Emacs version we're building,
### like `18.59' or `19.0'.
version=@version@
### This should be the name of the configuration we're building Emacs
### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
configuration=@configuration@
### The nt/ subdirectory gets built only for MinGW
NTDIR=@NTDIR@
# ==================== Where To Install Things ====================
# Location to install Emacs.app under GNUstep / Mac OS X.
# Later values may use these.
ns_appbindir=@ns_appbindir@
ns_appresdir=@ns_appresdir@
# Either yes or no depending on whether this is a relocatable Emacs.app.
ns_self_contained=@ns_self_contained@
# The default location for installation. Everything is placed in
# subdirectories of this directory. The default values for many of
# the variables below are expressed in terms of this one, so you may
# not need to change them. This defaults to /usr/local.
prefix=@prefix@
# Like `prefix', but used for architecture-specific files.
exec_prefix=@exec_prefix@
# Where to install Emacs and other binaries that people will want to
# run directly (like etags).
bindir=@bindir@
# The root of the directory tree for read-only architecture-independent
# data files. ${datadir}, ${infodir} and ${mandir} are based on this.
datarootdir=@datarootdir@
# Where to install architecture-independent data files. ${lispdir}
# and ${etcdir} are subdirectories of this.
datadir=@datadir@
# Where to install and expect the files that Emacs modifies as it
# runs. These files are all architecture-independent.
# Right now, this is not used.
sharedstatedir=@sharedstatedir@
# Where to install and expect executable files to be run by Emacs
# rather than directly by users (and other architecture-dependent
# data, although Emacs does not have any). The executables
# are actually installed in ${archlibdir}, which is (normally)
# a subdirectory of this.
libexecdir=@libexecdir@
# Where to install Emacs's man pages.
# Note they contain cross-references that expect them to be in section 1.
mandir=@mandir@
man1dir=$(mandir)/man1
# Where to install and expect the info files describing Emacs.
infodir=@infodir@
# Info files not in the doc/misc directory (we get those via make echo-info).
INFO_EXT=@INFO_EXT@
INFO_NONMISC=emacs$(INFO_EXT) eintr$(INFO_EXT) elisp$(INFO_EXT)
# If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
HAVE_MAKEINFO=@HAVE_MAKEINFO@
# Directory for local state files for all programs.
localstatedir=@localstatedir@
# Where to look for bitmap files.
bitmapdir=@bitmapdir@
# Where to find the source code. The source code for Emacs's C kernel is
# expected to be in ${srcdir}/src, and the source code for Emacs's
# utility programs is expected to be in ${srcdir}/lib-src. This is
# set by the configure script's `--srcdir' option.
# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
srcdir=@srcdir@
# Where the manpage source files are kept.
mansrcdir=$(srcdir)/doc/man
# Tell make where to find source files; this is needed for the makefiles.
VPATH=@srcdir@
# Where to find the application default.
x_default_search_path=@x_default_search_path@
# Where the etc/emacs.desktop file is to be installed.
desktopdir=$(datarootdir)/applications
# Where the etc/images/icons/hicolor directory is to be installed.
icondir=$(datarootdir)/icons
# The source directory for the icon files.
iconsrcdir=$(srcdir)/etc/images/icons
# ==================== Emacs-specific directories ====================
# These variables hold the values Emacs will actually use. They are
# based on the values of the standard Make variables above.
# Where to install the lisp, leim files distributed with
# Emacs. This includes the Emacs version, so that the
# lisp files for different versions of Emacs will install
# themselves in separate directories.
lispdir=@lispdir@
leimdir=@leimdir@
# Directories Emacs should search for standard lisp files.
# The default is ${lispdir}:${leimdir}.
standardlisppath=@standardlisppath@
# Directories Emacs should search for lisp files specific to this
# site (i.e. customizations), before consulting ${standardlisppath}.
# This should be a colon-separated list of directories.
locallisppath=@locallisppath@
# Where Emacs will search to find its lisp files. Before
# changing this, check to see if your purpose wouldn't
# better be served by changing locallisppath. This
# should be a colon-separated list of directories.
# The default is ${locallisppath}:${standardlisppath}.
lisppath=@lisppath@
# Where Emacs will search for its lisp files while
# building. This is only used during the process of
# compiling Emacs, to help Emacs find its lisp files
# before they've been installed in their final location.
# This should be a colon-separated list of directories.
# Normally it points to the lisp/ directory in the sources.
buildlisppath=${srcdir}/lisp
# Where to install the other architecture-independent
# data files distributed with Emacs (like the tutorial,
# the cookie recipes and the Zippy database). This path
# usually contains the Emacs version number, so the data
# files for multiple versions of Emacs may be installed
# at once.
etcdir=@etcdir@
# Where to put executables to be run by Emacs rather than
# the user. This path usually includes the Emacs version
# and configuration name, so that multiple configurations
# for multiple versions of Emacs may be installed at
# once.
archlibdir=@archlibdir@
# Where to put the etc/DOC file.
etcdocdir=@etcdocdir@
# Where to install Emacs game score files.
gamedir=@gamedir@
# ==================== Utility Programs for the Build ====================
# Allow the user to specify the install program.
# Note that if the system does not provide a suitable install,
# configure will use build-aux/install-sh. Annoyingly, it does
# not use an absolute path. So we must take care to always run
# INSTALL-type commands from the directory containing the Makefile.
# This explains (I think) the cd thisdir seen in several install rules.
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_INFO = @INSTALL_INFO@
# By default, we uphold the dignity of our programs.
INSTALL_STRIP =
MKDIR_P = @MKDIR_P@
# Create a link to a file in the same directory as the target.
LN_S_FILEONLY = @LN_S_FILEONLY@
# We use gzip to compress installed .el files.
GZIP_PROG = @GZIP_PROG@
# ============================= Targets ==============================
# Program name transformation.
TRANSFORM = @program_transform_name@
# What emacs should be called when installed.
EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'`
EMACS = ${EMACS_NAME}${EXEEXT}
EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
# Subdirectories to make recursively.
SUBDIR = $(NTDIR) lib lib-src src lisp leim
# The subdir makefiles created by config.status.
SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
# Subdirectories to install, and where they'll go. lib-src's and nt's
# makefiles know how to install them, so we don't do that here.
# Directories that cannot simply be copied, eg info, are treated
# separately. quail appears twice because in out-of-tree builds, it
# exists twice.
COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
all: ${SUBDIR}
.PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC
removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
# Generate epaths.h from epaths.in. This target is invoked by `configure'.
# See comments in configure.ac for why it is done this way, as opposed
# to just letting configure generate epaths.h from epaths.in in a
# similar way to how Makefile is made from Makefile.in.
epaths-force: FRC
@(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
x_default_search_path=`echo ${x_default_search_path}`; \
gamedir=`echo ${gamedir}`; \
sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
-e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
-e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
-e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
-e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
-e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
-e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
-e 's;\(#.*PATH_DOC\).*$$;\1 "${etcdocdir}";') && \
${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
# Convert MSYS-style /x/foo or Windows-style x:\foo file names
# into x:/foo that Windows can grok.
msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,'
# Transform directory search path and its components. Original can
# be MSYS or Windows style. Set path separator to ";", directory
# separator to "/" and transform MSYS-style "/c/" to "c:/".
# Remove empty path components and escape semicolons.
msys_lisppath_to_w32=sed -e 's,\\\\,/,g' \
-e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g' \
-e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g' \
-e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g'
# Replace "${prefix}" with '%emacs_dir%' (which expands to install
# directory at runtime).
msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
# Quote Sed special characters (except backslash and newline) with
# a double backslash.
msys_sed_sh_escape=sed -e 's/[];$$*.^[]/\\\\&/g'
# The w32 build needs a slightly different editing, and it uses
# nt/epaths.nt as the template.
# Use the value of ${locallisppath} supplied by `configure',
# to support the --enable-locallisppath argument.
epaths-force-w32: FRC
@(w32srcdir=`echo "${srcdir}" | ${msys_to_w32}` ; \
prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \
locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \
sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$ \
-e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
-e '/^.*#/s/@VER@/${version}/g' \
-e '/^.*#/s/@CFG@/${configuration}/g' \
-e "/^.*#/s|@SRC@|$${w32srcdir}|g") && \
${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
# If lib/Makefile would build files in '.', then build them before
# building 'lib', to avoid races with parallel makes.
lib: am--refresh
lib-src src: $(NTDIR) lib
src: lib-src
# We need to build `emacs' in `src' to compile the *.elc files in `lisp'
# and `leim'.
lisp leim: src
# These targets should be "${SUBDIR} without `src'".
lib lib-src lisp leim nt: Makefile FRC
cd $@ && $(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
# Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
# is either set to bootstrap-emacs (in case bootstrap-emacs has not been
# constructed yet) or the empty string (otherwise).
# src/Makefile.in uses it to implement conditional dependencies, so that
# files that need bootstrap-emacs to be built do not additionally need
# to be kept fresher than bootstrap-emacs. Otherwise changing a single
# file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
# all preloaded elisp files, and only then dump the actual src/emacs, which
# is not wrong, but is overkill in 99.99% of the cases.
src: Makefile FRC
dirstate='.bzr/checkout/dirstate'; \
vcswitness='$$(srcdir)/../'$$dirstate; \
[ -r "$(srcdir)/$$dirstate" ] || vcswitness=''; \
cd $@ || exit; \
boot=bootstrap-emacs$(EXEEXT); \
[ ! -x "$$boot" ] || boot=''; \
$(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot" \
VCSWITNESS="$$vcswitness"
blessmail: Makefile src FRC
cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
MAKE='${MAKE}' archlibdir='$(archlibdir)'
# We used to have one rule per */Makefile.in, but that leads to race
# conditions with parallel makes, so let's assume that the time stamp on
# ./Makefile is representative of the time stamp on all the other Makefiles.
#
# config.status overrides MAKEFILE_NAME with a bogus name when creating
# src/epaths.h, so that 'make epaths-force' does not recursively invoke
# config.status and overwrite config.status while executing it (Bug#11214).
#
# 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
# then attempts to build that file. This forces 'Makefile', 'lib/Makefile',
# etc. to be built without running into similar recursion problems.
MAKEFILE_NAME = Makefile
$(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
$(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk
MAKE='$(MAKE)' ./config.status
# Don't erase these files if make is interrupted while refreshing them.
.PRECIOUS: Makefile config.status
config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
if [ -x ./config.status ]; then \
$(CFG) ./config.status --recheck; \
else \
$(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
fi
AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
$(srcdir)/configure: $(AUTOCONF_INPUTS)
cd ${srcdir} && autoconf
ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
$(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
cd $(srcdir) && aclocal -I m4
AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
$(srcdir)/lib/gnulib.mk
$(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
cd $(srcdir) && automake --gnu -a -c lib/Makefile
# Regenerate files that this makefile would have made, if this makefile
# had been built by Automake. The name 'am--refresh' is for
# compatibility with subsidiary Automake-generated makefiles.
am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
.PHONY: am--refresh
$(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
@ # Usually, there's no need to rebuild src/config.in just
@ # because stamp-h.in has changed (since building stamp-h.in
@ # refreshes config.in as well), but if config.in is missing
@ # then we really need to do something more.
[ -r "$@" ] || ( cd ${srcdir} && autoheader )
$(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
cd ${srcdir} && autoheader
rm -f $(srcdir)/src/stamp-h.in
echo timestamp > $(srcdir)/src/stamp-h.in
# ==================== Installation ====================
.PHONY: install install-arch-dep install-arch-indep install-etcdoc install-info
.PHONY: install-man install-etc install-strip install-$(NTDIR)
.PHONY: uninstall uninstall-$(NTDIR)
## If we let lib-src do its own installation, that means we
## don't have to duplicate the list of utilities to install in
## this Makefile as well.
install: all install-arch-indep install-etcdoc install-arch-dep install-$(NTDIR) blessmail
@true
## Ensure that $subdir contains a subdirs.el file.
## Here and elsewhere, we set the umask so that any created files are
## world-readable.
## TODO it might be good to warn about non-standard permissions of
## pre-existing directories, but that does not seem easy.
write_subdir=if [ -f $${subdir}/subdirs.el ]; \
then true; \
else \
umask 022; \
${MKDIR_P} $${subdir}; \
(echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
echo " (normal-top-level-add-subdirs-to-load-path))") \
> $${subdir}/subdirs.el; \
fi
### Install the executables that were compiled specifically for this machine.
### We do install-arch-indep first because the executable needs the
### Lisp files and DOC file to work properly.
install-arch-dep: src install-arch-indep install-etcdoc install-$(NTDIR)
umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
cd lib-src && \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
exec_prefix=${exec_prefix} bindir=${bindir} \
libexecdir=${libexecdir} archlibdir=${archlibdir} \
INSTALL_STRIP=${INSTALL_STRIP}
if test "${ns_self_contained}" = "no"; then \
${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) || true; \
if test "x${NO_BIN_LINK}" = x; then \
rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
cd $(DESTDIR)${bindir} && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
fi; \
else \
subdir=${ns_appresdir}/site-lisp; \
${write_subdir} || exit 1; \
rm -rf ${ns_appresdir}/share; \
fi
### Windows-specific install target for installing programs produced
### in nt/, and its Posix do-nothing shadow.
install-:
install-nt:
cd $(NTDIR) && \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
exec_prefix=${exec_prefix} bindir=${bindir} \
libexecdir=${libexecdir} archlibdir=${archlibdir} \
INSTALL_STRIP=${INSTALL_STRIP}
## In the share directory, we are deleting:
## applications (with emacs.desktop, also found in etc/)
## emacs (basically empty except for unneeded site-lisp directories)
## icons (duplicates etc/images/icons/hicolor)
## This is install-etc for everything except self-contained-ns builds.
## For them, it is empty.
INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
## Needs to be the user running install, so configure can't set it.
set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
`id -un 2> /dev/null`; do \
[ -n "$${installuser}" ] && break ; \
done
### Install the files that are machine-independent.
### Most of them come straight from the distribution; the exception is
### the DOC file, which is copied from the build directory.
## We delete each directory in ${COPYDESTS} before we copy into it;
## that way, we can reinstall over directories that have been put in
## place with their files read-only (perhaps because they are checked
## into RCS). In order to make this safe, we make sure that the
## source exists and is distinct from the destination.
## We delete etc/DOC* because there may be irrelevant DOC files from
## other builds in the source directory. This is ok because we just
## deleted the entire installed etc/ directory and recreated it.
## install-etcdoc installs the relevant DOC.
## Note that we install etc/refcards/*.ps if present.
## TODO we should compress these if GZIP_PROG is set.
## It would be simpler to have a separate install rule for etc/refcards
## (maybe move it to doc/refcards?).
## Note that the Makefiles in the etc directory are potentially useful
## in an installed Emacs, so should not be excluded.
## We used to create locallisppath, but if it points to non-standard
## locations, is not really Emacs's job to create these directories,
## so it is no longer done.
## Note that we use tar instead of plain old cp -R/-r because the latter
## is apparently not portable (even in 2012!).
## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
## I have no idea which platforms Emacs supports where cp -R does not
## work correctly, and therefore no idea when tar can be replaced.
## See also these comments from 2004 about cp -r working fine:
## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
-set ${COPYDESTS} ; \
unset CDPATH; \
$(set_installuser); \
for dir in ${COPYDIR} ; do \
[ -d $${dir} ] || exit 1 ; \
dest=$$1 ; shift ; \
[ -d $${dest} ] && \
[ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
continue ; \
if [ "$${dir}" = "leim/quail" ]; then \
[ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
continue ; \
else \
rm -rf $${dest} ; \
umask 022; ${MKDIR_P} $${dest} ; \
fi ; \
echo "Copying $${dir} to $${dest}..." ; \
(cd $${dir}; tar -chf - . ) \
| (cd $${dest}; umask 022; \
tar -xvf - && cat > /dev/null) || exit 1; \
if [ "$${dir}" = "${srcdir}/etc" ]; then \
rm -f $${dest}/DOC* ; \
rm -f $${dest}/refcards/*.aux $${dest}/refcards/*.dvi; \
rm -f $${dest}/refcards/*.log; \
else true; \
fi; \
for subdir in `find $${dest} -type d -print` ; do \
chmod a+rx $${subdir} ; \
rm -f $${subdir}/.gitignore ; \
rm -f $${subdir}/.arch-inventory ; \
rm -f $${subdir}/.DS_Store ; \
rm -f $${subdir}/\#* ; \
rm -f $${subdir}/.\#* ; \
rm -f $${subdir}/*~ ; \
rm -f $${subdir}/*.orig ; \
rm -f $${subdir}/ChangeLog* ; \
[ "$${dir}" != "${srcdir}/etc" ] && \
rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
done ; \
find $${dest} -exec chown $${installuser} {} ';' ;\
done
-rm -f $(DESTDIR)${leimdir}/leim-list.el
${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el
-rm -f $(DESTDIR)${lispdir}/subdirs.el
umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir}
subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
${write_subdir}
subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
${write_subdir} || true
[ -z "${GZIP_PROG}" ] || \
( echo "Compressing *.el ..." ; \
unset CDPATH; \
thisdir=`/bin/pwd`; \
for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \
cd $${thisdir} ; \
cd $${dir} || exit 1 ; \
for f in `find . -name "*.elc" -print`; do \
${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
done ; \
done )
-chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
## The above chmods are needed because "umask 022; tar ..." is not
## guaranteed to do the right thing; eg if we are root and tar is
## preserving source permissions.
## Note that install-arch-indep deletes and recreates the entire
## installed etc/ directory, so we need it to run before this does.
install-etcdoc: src install-arch-indep
-unset CDPATH; \
umask 022; ${MKDIR_P} $(DESTDIR)${etcdocdir} ; \
if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${etcdocdir}; /bin/pwd` ]; \
then \
docfile="DOC"; \
echo "Copying etc/$${docfile} to $(DESTDIR)${etcdocdir} ..." ; \
${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${etcdocdir}/$${docfile}; \
$(set_installuser); \
chown $${installuser} $(DESTDIR)${etcdocdir}/$${docfile} || true ; \
else true; fi
install-info: info
umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
-unset CDPATH; \
thisdir=`/bin/pwd`; \
[ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \
(cd $(DESTDIR)${infodir}; \
[ -f dir ] || \
(cd $${thisdir}; \
${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
info_misc=`cd $${thisdir}/doc/misc && \
$(QUIET_SUBMAKE) $(MAKE) -s echo-info \
`; \
cd ${srcdir}/info ; \
for elt in ${INFO_NONMISC} $${info_misc}; do \
test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
(cd $${thisdir}; \
${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
[ -n "${GZIP_PROG}" ] || continue ; \
rm -f $(DESTDIR)${infodir}/$$f.gz; \
${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
done; \
(cd $${thisdir}; \
${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
done)
## "gzip || true" is because some gzips exit with non-zero status
## if compression would not reduce the file size. Eg, the gzip in
## OpenBSD 4.9 seems to do this (2013/03). In Emacs, this can
## only happen with the tiny ctags.1 manpage. We don't really care if
## ctags.1 is compressed or not. "gzip -f" is another option here,
## but not sure if portable.
install-man:
umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
thisdir=`/bin/pwd`; \
cd ${mansrcdir}; \
for page in *.1; do \
dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
(cd $${thisdir}; \
${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${dest}); \
[ -n "${GZIP_PROG}" ] || continue ; \
rm -f $(DESTDIR)${man1dir}/$${dest}.gz; \
${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${dest} || true; \
done
## Install those items from etc/ that need to end up elsewhere.
## If you prefer, choose "emacs22" at installation time.
## Note: emacs22 does not have all the resolutions.
EMACS_ICON=emacs
install-etc:
umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \
sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \
-e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \
${srcdir}/etc/emacs.desktop > $${tmp}; \
${INSTALL_DATA} $${tmp} $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop; \
rm -f $${tmp}
thisdir=`/bin/pwd`; \
cd ${iconsrcdir} || exit 1; umask 022 ; \
for dir in */*/apps */*/mimetypes; do \
[ -d $${dir} ] || continue ; \
( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
for icon in $${dir}/${EMACS_ICON}[.-]*; do \
[ -r $${icon} ] || continue ; \
ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
( cd $${thisdir}; \
${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${dir}/$${dest} ) \
|| exit 1; \
done ; \
done
### Build Emacs and install it, stripping binaries while installing them.
install-strip:
$(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
### Delete all the installed files that the `install' target would
### create (but not the noninstalled files such as `make all' would create).
###
### Don't delete the lisp and etc directories if they're in the source tree.
uninstall: uninstall-$(NTDIR) uninstall-doc
cd lib-src && \
$(MAKE) $(MFLAGS) uninstall \
prefix=${prefix} exec_prefix=${exec_prefix} \
bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
-unset CDPATH; \
for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \
if [ -d $${dir} ]; then \
case `cd $${dir} ; /bin/pwd` in \
`cd ${srcdir} ; /bin/pwd`* ) ;; \
* ) rm -rf $${dir} ;; \
esac ; \
case $${dir} in \
$(DESTDIR)${datadir}/emacs/${version}/* ) \
rm -rf $(DESTDIR)${datadir}/emacs/${version} \
;; \
esac ; \
fi ; \
done
-rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
thisdir=`/bin/pwd`; \
(info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
if cd $(DESTDIR)${infodir}; then \
for elt in ${INFO_NONMISC} $${info_misc}; do \
(cd $${thisdir}; \
$(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
if [ -n "${GZIP_PROG}" ]; then \
ext=.gz; else ext=; fi; \
rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
done; \
fi)
(if [ -n "${GZIP_PROG}" ]; then \
ext=.gz; else ext=; fi; \
if cd ${mansrcdir}; then \
for page in *.1; do \
rm -f $(DESTDIR)${man1dir}/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
fi)
(cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS) || true)
(if cd $(DESTDIR)${icondir}; then \
rm -f hicolor/*x*/apps/${EMACS_NAME}.png \
hicolor/scalable/apps/${EMACS_NAME}.svg \
hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \
fi)
-rm -f $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop
for file in snake-scores tetris-scores; do \
file=$(DESTDIR)${gamedir}/$${file}; \
[ -s $${file} ] || rm -f $$file; \
done
### Windows-specific uninstall target for removing programs produced
### in nt/, and its Posix do-nothing shadow.
uninstall-:
uninstall-nt:
cd $(NTDIR) && \
$(MAKE) $(MFLAGS) uninstall \
prefix=${prefix} exec_prefix=${exec_prefix} \
bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
FRC:
# ==================== Cleaning up and miscellanea ====================
.PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
### `mostlyclean'
### Like `clean', but may refrain from deleting a few files that people
### normally don't want to recompile. For example, the `mostlyclean'
### target for GCC does not delete `libgcc.a', because recompiling it
### is rarely necessary and takes a lot of time.
mostlyclean: FRC
cd src && $(MAKE) $(MFLAGS) mostlyclean
cd oldXMenu && $(MAKE) $(MFLAGS) mostlyclean
cd lwlib && $(MAKE) $(MFLAGS) mostlyclean
cd lib && $(MAKE) $(MFLAGS) mostlyclean
cd lib-src && $(MAKE) $(MFLAGS) mostlyclean
cd nt && $(MAKE) $(MFLAGS) mostlyclean
-cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean
-cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean
-cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean
-cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean
cd leim && $(MAKE) $(MFLAGS) mostlyclean
### `clean'
### Delete all files from the current directory that are normally
### created by building the program. Don't delete the files that
### record the configuration. Also preserve files that could be made
### by building, but normally aren't because the distribution comes
### with them.
###
### Delete `.dvi' files here if they are not part of the distribution.
clean: FRC
-rm -f etc/emacs.tmpdesktop
cd src && $(MAKE) $(MFLAGS) clean
cd oldXMenu && $(MAKE) $(MFLAGS) clean
cd lwlib && $(MAKE) $(MFLAGS) clean
cd lib && $(MAKE) $(MFLAGS) clean
cd lib-src && $(MAKE) $(MFLAGS) clean
cd nt && $(MAKE) $(MFLAGS) clean
-cd doc/emacs && $(MAKE) $(MFLAGS) clean
-cd doc/misc && $(MAKE) $(MFLAGS) clean
-cd doc/lispref && $(MAKE) $(MFLAGS) clean
-cd doc/lispintro && $(MAKE) $(MFLAGS) clean
cd leim && $(MAKE) $(MFLAGS) clean
cd nextstep && $(MAKE) $(MFLAGS) clean
### `bootclean'
### Delete all files that need to be remade for a clean bootstrap.
top_bootclean=\
rm -f config.cache config.log
### `distclean'
### Delete all files from the current directory that are created by
### configuring or building the program. If you have unpacked the
### source and built the program without creating any other files,
### `make distclean' should leave only the files that were in the
### distribution.
top_distclean=\
${top_bootclean}; \
rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
distclean: FRC
cd src && $(MAKE) $(MFLAGS) distclean
cd oldXMenu && $(MAKE) $(MFLAGS) distclean
cd lwlib && $(MAKE) $(MFLAGS) distclean
cd lib && $(MAKE) $(MFLAGS) distclean
cd lib-src && $(MAKE) $(MFLAGS) distclean
cd nt && $(MAKE) $(MFLAGS) distclean
cd doc/emacs && $(MAKE) $(MFLAGS) distclean
cd doc/misc && $(MAKE) $(MFLAGS) distclean
cd doc/lispref && $(MAKE) $(MFLAGS) distclean
cd doc/lispintro && $(MAKE) $(MFLAGS) distclean
cd leim && $(MAKE) $(MFLAGS) distclean
cd lisp && $(MAKE) $(MFLAGS) distclean
cd nextstep && $(MAKE) $(MFLAGS) distclean
[ ! -d test/automated ] || { \
cd test/automated && $(MAKE) $(MFLAGS) distclean; \
}
${top_distclean}
### `bootstrap-clean'
### Delete everything that can be reconstructed by `make' and that
### needs to be deleted in order to force a bootstrap from a clean state.
bootstrap-clean: FRC
cd src && $(MAKE) $(MFLAGS) bootstrap-clean
cd oldXMenu && $(MAKE) $(MFLAGS) maintainer-clean
cd lwlib && $(MAKE) $(MFLAGS) maintainer-clean
cd lib && $(MAKE) $(MFLAGS) maintainer-clean
cd lib-src && $(MAKE) $(MFLAGS) maintainer-clean
cd nt && $(MAKE) $(MFLAGS) maintainer-clean
-cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean
-cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean
-cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean
-cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean
cd leim && $(MAKE) $(MFLAGS) maintainer-clean
cd lisp && $(MAKE) $(MFLAGS) bootstrap-clean
cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean
[ ! -d test/automated ] || { \
cd test/automated && $(MAKE) $(MFLAGS) bootstrap-clean; \
}
[ ! -f config.log ] || mv -f config.log config.log~
${top_bootclean}
### `maintainer-clean'
### Delete everything from the current directory that can be
### reconstructed with this Makefile. This typically includes
### everything deleted by distclean, plus more: C source files
### produced by Bison, tags tables, info files, and so on.
###
### One exception, however: `make maintainer-clean' should not delete
### `configure' even if `configure' can be remade using a rule in the
### Makefile. More generally, `make maintainer-clean' should not delete
### anything that needs to exist in order to run `configure' and then
### begin to build the program.
top_maintainer_clean=\
${top_distclean}; \
rm -fr autom4te.cache
maintainer-clean: bootstrap-clean FRC
cd src && $(MAKE) $(MFLAGS) maintainer-clean
cd lisp && $(MAKE) $(MFLAGS) maintainer-clean
[ ! -d test/automated ] || { \
cd test/automated && $(MAKE) $(MFLAGS) maintainer-clean; \
}
${top_maintainer_clean}
### This doesn't actually appear in the coding standards, but Karl
### says GCC supports it, and that's where the configuration part of
### the coding standards seem to come from. It's like distclean, but
### it deletes backup and autosave files too.
extraclean:
for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
${top_maintainer_clean}
-rm -f config-tmp-*
-rm -f *~ \#*
# The src subdir knows how to do the right thing
# even when the build directory and source dir are different.
.PHONY: TAGS tags
TAGS tags: lib lib-src src
cd src; $(MAKE) $(MFLAGS) tags
check:
@if test ! -d test/automated; then \
echo "You do not seem to have the test/ directory."; \
echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
else \
cd test/automated && $(MAKE) $(MFLAGS) check; \
fi
dist:
cd ${srcdir}; ./make-dist
DVIS = lispref-dvi lispintro-dvi emacs-dvi misc-dvi
HTMLS = lispref-html lispintro-html emacs-html misc-html
INFOS = lispref-info lispintro-info emacs-info misc-info
PDFS = lispref-pdf lispintro-pdf emacs-pdf misc-pdf
PSS = lispref-ps lispintro-ps emacs-ps misc-ps
DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
$(DOCS):
t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
.PHONY: $(DOCS) docs pdf ps
.PHONY: info dvi dist check html info-real force-info check-info-dir
## TODO add etc/refcards.
docs: $(DOCS)
dvi: $(DVIS)
html: $(HTMLS)
info-real: $(INFOS)
pdf: $(PDFS)
ps: $(PSS)
INSTALL_DVI = install-emacs-dvi install-lispref-dvi \
install-lispintro-dvi install-misc-dvi
INSTALL_HTML = install-emacs-html install-lispref-html \
install-lispintro-html install-misc-html
INSTALL_PDF = install-emacs-pdf install-lispref-pdf \
install-lispintro-pdf install-misc-pdf
INSTALL_PS = install-emacs-ps install-lispref-ps \
install-lispintro-ps install-misc-ps
INSTALL_DOC = $(INSTALL_DVI) $(INSTALL_HTML) $(INSTALL_PDF) $(INSTALL_PS)
## Install non .info forms of the documentation.
## TODO add etc/refcards.
$(INSTALL_DOC):
t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
.PHONY: $(INSTALL_DOC) install-doc
.PHONY: install-dvi install-html install-pdf install-ps
install-doc: $(INSTALL_DOC)
install-dvi: $(INSTALL_DVI)
install-html: $(INSTALL_HTML)
install-pdf: $(INSTALL_PDF)
install-ps: $(INSTALL_PS)
UNINSTALL_DVI = uninstall-emacs-dvi uninstall-lispref-dvi \
uninstall-lispintro-dvi uninstall-misc-dvi
UNINSTALL_HTML = uninstall-emacs-html uninstall-lispref-html \
uninstall-lispintro-html uninstall-misc-html
UNINSTALL_PDF = uninstall-emacs-pdf uninstall-lispref-pdf \
uninstall-lispintro-pdf uninstall-misc-pdf
UNINSTALL_PS = uninstall-emacs-ps uninstall-lispref-ps \
uninstall-lispintro-ps uninstall-misc-ps
UNINSTALL_DOC = $(UNINSTALL_DVI) $(UNINSTALL_HTML) $(UNINSTALL_PDF) $(UNINSTALL_PS)
$(UNINSTALL_DOC):
t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
.PHONY: $(UNINSTALL_DOC) uninstall-doc
.PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
uninstall-doc: $(UNINSTALL_DOC)
uninstall-dvi: $(UNINSTALL_DVI)
uninstall-html: $(UNINSTALL_HTML)
uninstall-pdf: $(UNINSTALL_PDF)
uninstall-ps: $(UNINSTALL_PS)
force-info:
# Note that man/Makefile knows how to put the info files in $(srcdir),
# so we can do ok running make in the build dir.
# This used to have a clause that exited with an error if MAKEINFO = no.
# But it is inappropriate to do so without checking if makeinfo is
# actually needed - it is not if the info files are up-to-date. (Bug#3982)
# Only the doc/*/Makefiles can decide that, so we let those rules run
# and give a standard error if makeinfo is needed but missing.
# While it would be nice to give a more detailed error message, that
# would require changing every rule in doc/ that builds an info file,
# and it's not worth it. This case is only relevant if you download a
# release, then change the .texi files.
info: force-info
@if test "$(HAVE_MAKEINFO)" = "no"; then \
echo "Configured --without-makeinfo, not building manuals" ; \
else \
$(MAKE) $(MFLAGS) info-real ; \
fi
# The info/dir file must be updated by hand when new manuals are added.
# Cannot add an info/dir entry for efaq-w32 since it is not installed
# on all platforms.
check-info-dir: info
cd info ; \
missing= ; \
for file in *; do \
test -f "$${file}" || continue ; \
case $${file} in \
*-[0-9]*|COPYING|dir|efaq-w32*) continue ;; \
esac ; \
file=`echo $${file} | sed 's/\.info//'` ; \
grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
done ; \
if test -n "$${missing}"; then \
echo "Missing info/dir entries: $${missing}" ; \
exit 1 ; \
fi ; \
echo "info/dir is OK"
#### Bootstrapping.
### This first cleans the lisp subdirectory, removing all compiled
### Lisp files. Then re-run make to build all the files anew.
.PHONY: bootstrap
# Bootstrapping does the following:
# * Remove files to start from a bootstrap-clean slate.
# * Run autogen.sh, falling back on copy_autogen if autogen.sh fails.
# * Rebuild Makefile, to update the build procedure itself.
# * Do the actual build.
bootstrap: bootstrap-clean FRC
cd $(srcdir) && { ./autogen.sh || autogen/copy_autogen; }
$(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
$(MAKE) $(MFLAGS) info all
.PHONY: check-declare
check-declare:
@if [ ! -f $(srcdir)/src/emacs ]; then \
echo "You must build Emacs to use this command"; \
exit 1; \
fi
cd leim && $(MAKE) $(MFLAGS) $@
cd lisp && $(MAKE) $(MFLAGS) $@