Andrey Slusar
cddc3c9179
Update xemacs and xemacs21-mule to 21.4.20 "Double Solitaire".
2006-12-12 11:41:15 +00:00
Joe Marcus Clarke
29747f458a
Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
...
new freetype2 where needed.
Submitted by: mezz, ahze, pav, and many others
Approved by: portmgr (implicit, kris)
2006-10-14 08:54:54 +00:00
Volker Stolz
456bbaed3b
Optionally enable OpenLDAP through knob WITH_LDAP
2006-03-17 15:08:39 +00:00
Andrey Slusar
614d32b040
Fix plist.
...
Reported by: krismail
2006-02-12 20:59:06 +00:00
Andrey Slusar
9e2557886d
Fix pkg-plist
...
Reported by: pointyhat(kris)
2006-02-02 13:51:54 +00:00
Andrey Slusar
1d688800ec
Update xemacs and xemacs21-mule to 21.4.19
2006-01-31 10:20:43 +00:00
Edwin Groothuis
e33233f948
Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry
...
Approved by: krion@
PR: ports/88711 (related)
2006-01-22 01:55:36 +00:00
Andrey Slusar
ad81f93101
editors/emacs20 was changed not to conflict with other emacsen.
...
PR: ports/90477
Submitted by: NIIMI Satoshi <sa2c@sa2c.net>
Approved by: sem(mentor)
2005-12-16 08:10:54 +00:00
Renato Botelho
dd7e522397
- Update to 21.4.18
...
PR: ports/90011
Submitted by: Andrey Slusar <anrays@gmail.com>
2005-12-06 16:15:39 +00:00
Yoichi NAKAYAMA
a3969f9a8c
Fix XEmacs working under amd64.
...
PR: ports/89559
Submitted by: Andrey Slusar
2005-11-26 16:32:22 +00:00
Pav Lucistnik
792b758ef4
- Add SHA256
2005-11-26 01:48:16 +00:00
Sergey Matveychuk
58bb68c461
- Fix PLIST problem on amd64. Unbreak.
...
PR: ports/89250
Submitted by: Andrey Slusar
2005-11-19 15:13:16 +00:00
Ade Lovett
54a0b86543
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
...
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
2005-11-15 06:52:12 +00:00
Sergey Matveychuk
d4dcabf448
- Make packages optional (WITHOUT_XEMACS_PACKAGES).
...
- Remove dependency on mail/faces (it is not required for an base
editor configuration and it pulls in gtk1 and what comes with that.
- Integrate with the GNOME desktop if installed.
PR: ports/68826
Submitted by: Pawel Worach <pawel.worach@telia.com>
2005-06-15 07:25:14 +00:00
Jean-Yves Lefort
f08b9f8976
Add CONFLICTS variable, since this port conflicts with other
...
emacs/xemacs ports.
2005-05-06 09:07:45 +00:00
David E. O'Brien
c3d8037aeb
At Kris's request, back out the MACHINE_ARCH spelling correction until
...
after 5.4-RELEASE.
2005-04-12 03:26:56 +00:00
David E. O'Brien
f2fc2d60ae
Assist getting more ports working on AMD64 by obeying the
...
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
2005-04-11 08:04:41 +00:00
Mark Linimon
b422f9723a
Reset bouncing maintainer address:
...
----- The following addresses had permanent fatal errors -----
<pawel.worach@telia.com>
(reason: 550 RCPT TO:<pawel.worach@telia.com> User unknown)
2005-04-07 21:36:40 +00:00
Kris Kennaway
cd41e65b9d
BROKEN on amd64: Incomplete pkg-plist
...
Approved by: portmgr (self)
2005-03-27 02:39:38 +00:00
Sergey Matveychuk
75d9f01ba0
- Remove forgotten file
...
- Grant maintainership to submitter of the last PR
2005-02-09 13:19:57 +00:00
Sergey Matveychuk
e972d1edf6
- Update port to 21.4.17 "Jumbo Shrimp".
...
- Sync up Motif selection algorithm with xemacs21-mule port.
- Remove GTK support for now, it was commented out and it does not work well.
- General Makefile cleanup
- Unbreak on sparc64
PR: ports/77291
Submitted by: Pawel Worach <pawel.worach(at)telia.com>
2005-02-09 09:38:44 +00:00
Sergey Matveychuk
d331134e45
- Update to 21.4.16
...
- Fix build on -CURRENT
PR: ports/75492
Submitted by: Pawel Worach <pawel.worach(at)telia.com>
2004-12-25 22:27:59 +00:00
Gary Jennejohn
fc9b9d1c25
It turns out that Andrey Slusar only wants to maintain the xemacs-mule
...
ports, so make the maintainer ports@.
2004-12-14 21:21:28 +00:00
Gary Jennejohn
b56fe946d7
Use the BZIP2 distribution instead of a whole bunch of tar.gz files [1].
...
Make Andrey Slusar <anray AT inet DOT ua> the maintainer, since he kindly
volunterred to take over this port from me.
Submitted by: Denis Shaposhnikov <dsh AT vlink DOT ru> [1]
2004-12-14 11:55:04 +00:00
Gary Jennejohn
cbdfc6e135
Update to 2.4.15.
...
Comment out the GTK support since either bsd.gnome.mk is broken or I'm
too stupid to figure it out.
2004-08-16 13:25:53 +00:00
Gary Jennejohn
6a027d62cd
Add patch-emacs.c to fix the following problem as quoted from the PR:
...
The port patches src/mem-limits.h to declare the "lim_data" variable
as rlim_t (a 64-bit type), but src/emacs.c still defines it as an
integer. This makes the memory limit checking think that there are
zero bytes available.
PR: 69347
Submitted by: Andrew Heybey <ath@niksun.com>
2004-07-21 21:56:24 +00:00
Gary Jennejohn
ad76ce6da9
Add patch-regex.c to handle an overflow which is caused by long lines
...
produced by compile and make output in xemacs.
PR: ports/62437
Submitted by: Palle Girgensohn <girgen@pingpong.net>
2004-04-18 20:28:17 +00:00
Edwin Groothuis
dc5c753a59
Unbreak port by moving some definitions from the pre-fetch target
...
to "above it".
Noticed by: nearly everybody.
2004-04-13 06:29:58 +00:00
Gary Jennejohn
2abaca8e66
Add a check for ${X11BASE}/lib/libXm.so so that a dependency can be added
...
on open-motif.
PR: ports/62401
Submitted by: Vivek Khera <khera@kcilink.com>
2004-04-12 21:47:20 +00:00
Trevor Johnson
8232e82f85
SIZEify (maintainer timeout)
2004-03-31 03:12:58 +00:00
Kris Kennaway
1dc9a49ff7
Rename misnamed patch (patch:mem-limits.h)
2004-03-25 10:56:24 +00:00
Kris Kennaway
e5a91991c0
Port to amd64.
...
Submitted by: James Van Artsdalen <james-freebsd-amd64 at jrv.org>, gallatin, kan
2004-03-25 10:17:38 +00:00
Gary Jennejohn
888a47e4f6
Update to version 21.4.14.
...
Submitted by: Oliver Banta <obanta@conft.net>
2003-10-18 10:32:45 +00:00
Gary Jennejohn
1d0a3fc683
Xemacs seems to be generally broken on sparc64. Add NOT_FOR_ARCHS=sparc64
...
to the Makefile.
2003-10-13 09:29:34 +00:00
Sergey A. Osokin
f37f7775e3
Make portlint(1) happy by changing strip to ${STRIP_CMD}
...
Submitted by: Oleg Karachevtsev <ok@etrust.ru>
PR: 56998
2003-09-24 09:37:11 +00:00
Gary Jennejohn
74097edf50
After a repo copy from xemacs-devel turn this port into xemacs.
2003-04-23 09:55:07 +00:00
Joe Marcus Clarke
e28f0247c9
Remove USE_GNOMENG.
2003-04-20 03:03:05 +00:00
Gary Jennejohn
16db3e6d3b
Remove pkg-comment and add COMMENT to the Makefile.
2003-03-06 11:02:59 +00:00
Gary Jennejohn
4995e75afe
Also update distinfo to reflect the update to 21.4.12.
2003-01-17 22:36:05 +00:00
Gary Jennejohn
d7911d42f5
Update to version 2.4.12.
...
Note that this port is now mis-named - 21.4 is the stable branch and 21.5
is the development branch. 21.1 (in xemacs21) is now "historical".
2003-01-17 10:04:12 +00:00
Gary Jennejohn
824629f4a1
xemacs21 and xemacs-devel: add a LIB_DEPENDS on compface.1 so that
...
the mail/faces port cannot be accidentally deleted if xemacs uses it.
xemacs-devel: Add nonas,noeds to the --with-sound line because xemacs-devel
barfs when trying to use our sounds/nas port. Noticed while testing the
fix for the PR.
PR: 44588
Submitted by: Volker Stolz <vs@foldr.org>
2002-10-29 13:03:48 +00:00
Mario Sergio Fujikawa Ferreira
4919a03c9a
Deploy USE_GNOMENG infrastructure
...
PR: 42197
Submitted by: Edwin Groothuis <edwin@mavetju.org>
2002-08-30 13:36:06 +00:00
Gary Jennejohn
cc7fcc1ae7
Add patch-al to work around an apparent bug in gcc31 in -current. The
...
problem was not observed with the gcc in -stable.
The apparent bug results in an endless loop if a certain routine in
lstream.c is inline'd.
2002-06-29 17:28:55 +00:00
Gary Jennejohn
c3b23cf49e
Update to 21.4.8.
2002-06-29 17:26:39 +00:00
Gary Jennejohn
fc3d466431
Add WITHOUT_X11 to allow making these ports without X11 support.
...
Add WITH_XAW3D for those who like a 3D look.
Otherwise no changes were made to the contents of the ports.
2002-01-28 20:44:11 +00:00
Gary Jennejohn
7fd890f0e4
Update to version 21.4.6.
...
Submitted by: Jerry A! <jerry@thehutt.org>
2002-01-09 18:55:37 +00:00
Will Andrews
f3171de7e6
First round of auto* cleanups:
...
- USE_AUTO* -> USE_AUTO*_VER=* where required
- USE_AUTO* / *_DEPENDS=.*auto*:*/devel/auto* -> GNU_CONFIGURE where OK
- Other minor changes to fix things
These changes should be no-ops with the current bsd.port.mk, but will
assist in preparing for the next generation of USE_AUTO*.
Submitted by: bento 4-exp USE_AUTO* cleanups
http://people.FreeBSD.org/~will/4-exp/
http://bento.FreeBSD.org/errorlogs/4-exp-latest/
2002-01-06 06:20:22 +00:00
Gary Jennejohn
e9418b6c1a
Since obrien deleted patch-aj from xemacs21, I guess it isn't needed
...
here either.
2001-12-09 10:31:32 +00:00
Mario Sergio Fujikawa Ferreira
75ad5febcb
Style police: WWW tags should either end in a file/script or TRAILING /; Fix the later case
2001-11-20 23:29:38 +00:00
Gary Jennejohn
e7d750da69
Add ``--with-ldap=no'' to the CONFIGURE_ARGS to avoid missing a dependency
...
in case the user has LDAP installed. This is one of those things which
are automatically detected at configure time.
PR: 31622
Submitted by: Alec Wolman <wolman@cs.washington.edu>
2001-10-30 23:13:34 +00:00