- Mention important changes related to the upgrade to UPDATING
- Update the dependency constraints
Co-authored-by: Sascha Biberhofer <ports at skyforge dot at>
PR: 263193
Approved by: Sascha Biberhofer <ports at skyforge dot at> (maintainer)
Font name changed. This is easy to miss and might cause problems.
Add a note as suggested in the PR.
PR: 249252
Reported by: tech-lists@zyxst.net
Fixes: 74953fa06f
Blacklisting is now disabled by default to avoid overriding the setting in
sshguard.conf. To enable blacklisting, uncomment the BLACKLIST_FILE line in
sshguard.conf.
PR: 221602
Reported by: bahlgren@beah.se
Submitted by: kevinz5000@gmail.com
Describe user impact as a result of sysutils/screen-4.9.0_3 which removes
setuid root by default, disabling multiuser feature. The option is
appropriately called MULTUSER. Users may enable the multiuser feature
in three ways, as discsussed by the update to UPDATING.
PR: 262903
Reported by: david@isnic.is
Since virtualbox-ose 6.1.26 a new networks.conf file has been
introduced and the software looks for it in /etc/vbox.
This commit introduces a patch to make virtualbox look for it in
PREFIX/etc/vbox.
To help users with configurations already using this file in /etc/vbox
notes to UPDATING, pkg-message and to the main virtualbox executable
script have been added.
Also adding some comments to the Makefile to note that QA warning
due to reinplace being run but not having changed any file are
expected due to the design of this port Makefile.
PR: 261522
- Add nats to UIDs and GIDs
- Add extra commands for logrotate and 'lame duck mode'.
From the docs:
In production we recommend that a server is shut down with "lame duck mode"
as a graceful way to slowly evict clients. With large deployments this
mitigates the "thundering herd" situation that will place CPU pressure on
servers as TLS enabled clients reconnect.
After entering lame duck mode, the server will stop accepting new
connections, wait for a 10 second grace period, then begin to evict clients
over a period of time configurable by the configuration option. This
period defaults to 2 minutes.
There have some CONFLICTS which doesn't make sense and actually makes
it impossible to install/upgrade the TeX through portmaster/ports so
remove those CONFLICTS and update UPDATING accordingly.
PR: 262058
Reported by: alt2600@icloud.com
sysutils/intel-pcm-devel became quite obsolte once sysutils/intel-pcm is
now pretty much following a constant and stable update cycle, so users of
the -devel version are encouraged to switch to it.
If you still have sysutils/intel-pcm-devel installed, please delete it from
your system and install sysutils/intel-pcm instead:
# pkg delete sysutils/intel-pcm-devel
# pkg install sysutils/intel-pcm
- Update MASTER_SITES_TEX_CTAN from https://tug.org/historic/
- Update texlua to use texlua53 library
- Deprecate CSLaTeX format
- Remove aleph as per Upstream
- Add common variables TEXLIVE_YEAR and TEXLIVE_VERSION to be used in
all ports related to tex*
- Fix dependency of print/texlive-texmf-source [1]
- devel/tex-kpathsea: Update version 6.2.1=>6.3.3
- devel/tex-libtexlua: Update version 5.2.4=>5.3.6
- devel/tex-libtexluajit: Update version 2.0.3=>2.1.0
- devel/tex-synctex: Update version 1.17.0=>2.0.0
- devel/tex-web2c: Update version 20150521=>20210325
- editors/texworks: Fix build with newer tex version
- print/tex-basic-engines: Update version 20150521=>20210325
- print/tex-dvipdfmax: Update version 20150521=>20210325
- print/tex-dvipsk: Update version 5.995=>20210325.1
- print/tex-formats: Update version 20150521=>20210325
- print/tex-jadetex:
- print/tex-luatex: Update version 0.80.0=>1.12.0
* Convert to dynamic pkg-plist
- print/tex-ptexenc: Update version 1.3.3=>1.3.9
- print/tex-xetex: Update version 0.99992=>0.99993
* Convert to dynamic pkg-plist
- print/texlive-base: Update version 20150521=>20210325
- print/texlive-docs: Update version 20150521=>20210325
* Convert to dynamic pkg-plist
- print/texlive-full: Update version 20150521=>20210325
- print/texlive-texmf-source: Update version 20150521=>20210325
- print/texlive-texmf: Update version 20150521=>20210325
* Convert to dynamic pkg-plist
- print/texlive-tlmgr: Update version 20150521=>20210325
- print/xpdfopen: Transfer MAINTAINER to tex@ as xpdfopen is an
integral part of tex after poppler support has been deprecated from
tex [2]
- textproc/dblatex: Update version 0.3.11=>0.3.12
* Take MAINTAINERship
- textproc/gastex: Fix build
- textproc/metauml: Fix build
PR: 226983 [1]
Reported by: Trond.Endrestol@ximalas.info [1]
Reviewed by: tcberner (private repo)
Approved by: hrs (maintainer-timeout) [2]
Relnotes: https://tug.org/texlive/doc/texlive-en/texlive-en.html#news
Sponsored by: Nepustil.net
re: https://github.com/librenms/librenms/releases/tag/22.2.1
This port update skips over several releases.
See: https://github.com/librenms/librenms/releases
See UPDATING for details on storage directory which needs to
move to /var/db/librenms
LiberNMS wants to write to the %%WWWDIR%%/storage directory. To comply
with man 7 hier, this entry is now a symlink to /var/db/librenms/storage
Please adjust your filesystem accordingly.
The contrib directory has been removed from the upstream tarball. As such,
the port now installs the log rotation file to
/${PREFIX}/etc/newsyslog.conf.d/librenms.conf.sample
PR: 260085 261031
There are some cases at least when using ports/portmaster php8[01]
reinstalltion do not properly overwrite php.conf file omitting openssl
as a default module. Additionally if we are using pkg then
php8[01]-openssl needs to be manually removed otherwise both the old
module and builtin module tried to be loaded while restarting php-fpm
service.
This note defines these cases in UPDATING.
Reported by: dim
Sponsored by: Bounce Experts
After the 91fdbed776 commit fixing the
issue for MySQL80 introduced another problem for the ports that depends
on php8[01]-openssl port couldn't be built as the fix prevented
php8[01]-openssl from being installed as it's already built with
default php installation. As the problem has grown much bigger now and
php80 is currently the DEFAULT php version so we are switching the
behavior of php8[01] ports making the openssl module as default.
- Remove non-default OPTION MYSQL80 from lang/php8[01]
- Remove ports security/php8[01]-openssl
- Remove OPTION OPENSSL from lang/php8[01]-extensions
- Mark lang/php8[01] to IGNORE with libressl and libressl-devel
Although php builds fine with those most of the extensions do not
as they have dependency on curl. So mark it early.
- OPTIONIZE lang/php80
- Change openssl_DEPENDS to conditional for php74 only as this module
is default from php80 with this commit. php74 do not have the issue
where it fails to connect to MySQL80 due to new caching_sha2_password
- Remove hash_DEPENDS from php.mk as it is a default module for all php
- Change json_DEPENDS to conditional for php74 only as this module is
default from php80
PR: 261797 259793 252420
Reported by: sean@rogue-research.commartin@waschbuesch.de
Approved by: tz (private email) ale (private email)
Sponsored by: Bounce Experts
- update to 2.12.2
- switch to archivers/7-zip for extracting 7-Zip archives. Patch has
been discussed with upstream and is waiting to be committed.
https://gitlab.com/amavis/amavis/-/merge_requests/90
PR: 260866
SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.
PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.
This allows us to be in adequacy with the packages that the author of these
libraries proposes, namely:
PyQt - devel/py-qt5-pyqt
PyQt-Charts - x11-toolkits/py-qt5-chart
PyQt-NetworkAuth – net/py-qt5-networkauth
PyQt-WebEngine – www/py-qt5-webengine
SIP – devel/py-sip
py-sip - devel/py-qt5-sip
PyQt-builder - devel/py-qtbuilder
Qscintilla - devel/py-qt5-qscintilla2
Reviewed by: diizzy, kde
Tested by: kai, rhurlin, arrowd, madpilot
Approved by: makc, tcberner, kde
Differential Revision: https://reviews.freebsd.org/D33237
Exp-run by: antoine
- 'pkg info php7\*' captures ports starting with portnames php74 only
while there are other ports like icingaweb2-php74 or nextcloud-php74.
This modification captures the later too.
Reported by: mfechner
* The default version of mail/bogofilter now uses LMDB instead
of Berkeley DB. It is not compatible and cannot read databases.
* bogofilter was renamed to bogofilter-bdb
* bogofilter-lmdb was renamed to bogofilter
* MOVED/UPDATING entries included.
- databases/xapian-bindings is a mata port which do not have
php:flavors and is unable to be MARKED to IGNORE as one of it's
dependent databases/php-xapian do not support php8.0. Hence this
creates a circular dependency and it fails to start bulk building. So
for now remove PHP from OPTIONS_DEFAULT.
PR: 260595
Approved by: ale portmgr(exp-run)
Sponsored by: Bounce Experts
- qemu-utils aka qemu-tools has now been merged as a flavor
within emulators/qemu.
- qemu-utils currently is a slave of qemu42 which has also been
DEPRECATED.
- Marked to EXPIRE on 2022-01-09 one day before qemu42
- Fix a typo in my previous UPDATING commit related to qemu5 [1]
PR: 260087 [1]
Reported by: grahamperrin@gmail.com [1]
Approved by: portmgr (blanket: infrastructure, compliance, sweeping)
- Has been updated to 5.2.0.
- This is the last version of 5.X.X branch of qemu and part of updating
emulators/qemu to latest 6.X.X branch.
- Added a stripped down version of qemu5-nox11 with FLAVORS
- Removed some reference to oszoo.org which no longer hosts qemu images
and is totally an irrelevent site
If a port depends on node, a simple:
USES= nodejs
can be added. It is also possible to define a specific version:
USES= nodejs:14
Use as current version the latest LTS version of node.
PR: 259783
Differential Revision: https://reviews.freebsd.org/D32790
Upgrade to the latest major vesrion of Node.js. Regenerate patches
since some have been adopted upstream, while others needed refreshing.
https://nodejs.org/en/blog/release/v17.0.0/
MFH: 2021Q4
Sponsored by: Miles AS