look for processes holding open references within the FS and kill
them, then use regular umount. This is necessary now that devfs
cannot be force-unmounted, and has the benefit that processes can't
hang around holding references to files between port builds.
* Preliminary work to support using ccache to accelerate builds.
processes holding open references within the FS and kill them, then use
regular umount. This is necessary now that devfs cannot be force-unmounted,
and has the benefit that processes can't hang around holding references to
files between port builds.
look for processes holding open references within the FS and kill
them, then use regular umount. This is necessary now that devfs
cannot be force-unmounted, and has the benefit that processes can't
hang around holding references to files between port builds.
* Reduce possibility for error by testing for presence of executable
ldconfig inside the chroot before attempting to run it (e.g. it may not
be there if the chroot was not completely initialized)
which are copied to www.freebsd.org for use by 'make fetchindex', as well
as the source of build failure reports on ports@FreeBSD.org when it is
broken.
fetch from ftp-master and pointyhat; they'll just get timeouts.
Instead, each machine is expected to set up their own MASTER_SITE_*
variables in etc/make.conf via a bindist-${hostname}.tar file.
Approved by: portmgr (self)
on a disconnected client, without running the time-consuming rsyncs.
This is useful when a build is interrupted and needs to be restarted.
* After we have cleaned up the machine, reset the queue counter by using
pollmachine -queue. This has a race condition if other builds are being
dispatched to the machine (e.g. builds on another branch):
getmachine can claim a directory and increment the counter, then the
machine is polled and finds e.g. 0 chroots in use, and resets the
counter to 0, then claim-chroot is run and the build dispatched, with
the counter now off-by-one. This could be fixed by running
claim-chroot with the .lock held, but this turns out to be too
time-consuming. A two-level lock approach might also fix this
efficiently.
same time, assuming that the admin has already built the INDEX and
INDEX.old in advance.
* Adapt to new method of calculating build concurrency, by summing the
value of ${maxjobs} listed in every portbuild.${machine}
* Support 5-exp builds
(i.e. if the package lists a dependency on the relevant package in the
PACKAGE_BUILDING case). This allows packages that require an
available DISPLAY to again build (with some forthcoming fixes to
existing ports).
Improve the reporting of detected filesystem anomalies (extra files
left behind after deinstallation, changes to and removal of
pre-existing files)
synchronously instead of probabilistically scheduling jobs, which
means that the job load on a machine never exceeds a desired
threshold, and we can preferentially use faster machines when they are
available. This has a dramatic effect on package build throughput,
although I don't yet have precise measurements of the performance
improvements.
Specifically, the changes are:
* Introduce the new variable maxjobs in portbuild. This replaces the
build scheduling weights previously listed in the mlist file, which
now changes format to list the build machines only, ranked in order of
preference for job dispatches (i.e. faster machines first).
* The ${arch}/queue directory is used to list machines available for
jobs (file content is the number of jobs currently running on the
machine). Changes to files in this directory are serialized using
lockf on the .lock file.
* Claim a machine with the getmachine script, with the .lock held.
This picks the machine with the fewestnumber of jobs running, which is
listed highest in the mlist file in case of multiple machines with
equal load. The job counter is incremented, and the file removed if
the counter reaches ${maxjobs} for that machine. If all machines are
busy, sleep for 15 seconds and retry.
* After we have claimed a machine, we run claim-chroot on it to claim
an empty chroot, as before. If the claim fails, release the job from
the queue with the releasemachine script and retry after a 15 second
wait.
* When the build is finished, decrement the job counter with the
releasemachine script, with .lock held.
* The checkmachines script now exists only to poll the load averages
for admin convenience (every 2 minutes), and to ping for unreachable
machines. When a machine cannot be reached, remove the entry in the
queue directory to stop further job dispatches to it. This needs more
work to deal with reinitialization of machines after they become
available again.
synchronously instead of probabilistically scheduling jobs, which
means that the job load on a machine never exceeds a desired
threshold, and we can preferentially use faster machines when they are
available. This has a dramatic effect on package build throughput,
although I don't yet have precise measurements of the performance
improvements.
Specifically, the changes are:
* Introduce the new variable maxjobs in portbuild. This replaces the
build scheduling weights previously listed in the mlist file, which
now changes format to list the build machines only, ranked in order of
preference for job dispatches (i.e. faster machines first).
* The ${arch}/queue directory is used to list machines available for
jobs (file content is the number of jobs currently running on the
machine). Changes to files in this directory are serialized using
lockf on the .lock file.
* Claim a machine with the getmachine script, with the .lock held.
This picks the machine with the fewestnumber of jobs running, which is
listed highest in the mlist file in case of multiple machines with
equal load. The job counter is incremented, and the file removed if
the counter reaches ${maxjobs} for that machine. If all machines are
busy, sleep for 15 seconds and retry.
* After we have claimed a machine, we run claim-chroot on it to claim
an empty chroot, as before. If the claim fails, release the job from
the queue with the releasemachine script and retry after a 15 second
wait.
* When the build is finished, decrement the job counter with the
releasemachine script, with .lock held.
* The checkmachines script now exists only to poll the load averages
for admin convenience (every 2 minutes), and to ping for unreachable
machines. When a machine cannot be reached, remove the entry in the
queue directory to stop further job dispatches to it. This needs more
work to deal with reinitialization of machines after they become
available again.
Additional changes to this file:
* Exit if passed a null package name, to avoid badness later on
* Send a nag-mail if pkg-plist errors are detected in the build
/rescue/mount -t linprocfs, so assume that the i386 build hosts have
statically-built copies of the necessary binaries in /sbin, until this is
fixed.
Create /usr/X11R6 inside the chroot so that mtree has something to do, since
this directory is otherwise orphaned.
List the extra/removed/changed files separately, and colour-code the
serious errors (files left behind outside of /usr/local and /usr/X11R^;
files removed that were installed by another port, and files with changed
permissions or ownership)
the port deinstall; mtree does not recurse into subdirectories it does
not know about
* Break out the 'files incorrectly removed' and 'files incorrectly changed'
into their own sections
* Remove USE_QT2 since it's obsolete now. [2]
* Clarify comments about ARCH. [3]
* Speedup 'make readmes'. Add a perl script "Tools/make_readmes"
and modify bsd.port.subdir.mk to avoid recursing into individual
port directories to create README.html. [4]
* Fix 'make search' to allow case insensitive search on 5-x/6-x. [5]
* Add the possibility to search the ports by category. [6]
* Remove tk42 and tcl76 from virtual categories since they're
obsolete. [7]
* Introduce new variable - DISTVERSION, vendor version of the
distribution, that can be set instead of PORTVERSION and is
automatically converted in a conforming PORTVERSION. [8]
* Use --suffix instead of -b option for patch(1) to make it
compatible with BSD patch(1) [9]
* Fix {WANT,WITH}_MYSQL_VER behavior, to deal with conflicting
versions. [10]
PR: ports/68895 [1], ports/69486 [2], ports/68539 [3],
ports/70018 [4], ports/68896 [5], ports/73299 [6],
ports/73570 [7], ports/67171 [8], ports/72182 [9]
Submitted by: linimon [1][3], arved [2][7], cperciva [4],
Matthew Seaman <m.seaman@infracaninophile.co.uk> [5],
Radek Kozlowski <radek@raadradd.com> [6],
eik [8], Andreas Hauser <andy-freebsd@splashground.de> [9],
clement [10]
restricted ports' instead of 'don't build any restricted ports' since
the former is useful when we're not intending to publish the results
of a build, but the latter is not.
Move the build preprocessing (directory setup, old build rotation,
etc) out from under -nobuild, so that we can set up a new build using
that option.
${arch}/${branch}/latest/${portdir}. We will use this in the
processfail script, so that the "new package build errors" webpages do
not have out-of-date links but instead link to the most recent copy of
the build error.
that it may be called by hand.
Support new portbuild.conf variables
client_user = user to connect to on the client (not necessarily
root). This user must have write permission to the
/var/portbuild tree if disconnected=1 (i.e. we're
going to run rsync).
rsync_gzip = set to "-z" to enable compression on low-bandwidth
disconnected clients.
Approved by: portmgr (self)
ssh times out)
* Support new portbuild.conf settings:
client_user = user to connect to on the client (not necessarily root)
sudo_cmd = If ssh'ing to a non-root user, run this command to gain
root privs (set to empty string for client_user=root,
or sudo for !root). Cannot require interactivity, of
course.
Approved by: portmgr (self)
