INFO_PATH variable may be used to specify their location. It defaults
to 'share/info' for the standard PREFIX, and 'info' when PREFIX ==
/usr. [1]
- Remove the <category>/pkg/COMMENT files in favour of a COMMENT
variable in <category>/Makefile [2]
- Prevent patch breakage with VERSION_CONTROL=numbered [3]
- Fix some instances of incorrect WRKDIRPREFIX handling. [4]
- remove useless ${MKDIR} ${WRKSRC} in config target [5]
- remove reference to OpenBSD [6]
- Exempt devel/p5-Module-Build from the self-dependency in
PERL_MODBUILD so that this port may use the option without getting an
infinite dependency list [7]
- The default PERL_ARCH is currently determined as a function of
OSVERSION. It should however be a function of PERL_LEVEL since the
correct value depends on what Perl version one has installed (older
Perl versions use ${ARCH}-freebsd, newer versions use mach). [8]
- Fix PORTDOCS on older (4.7, 5.0) systems [9]
- Allow 'make parallel' to generate a working makefile when not all
categories are present (this does not mean you'll be able to build all
ports, unless you make sure they don't have external dependencies) [10]
- Don't report symlinks as world-writable in the security check [11]
- Fix a comment that was broken by a mismerged patch [12]
- Clarify the meaning of USE_*, WANT_*, WITH_* and WITHOUT_* [13]
- Don't set _CHKSUMFILES/_IGNOREFILES if CKSUMFILES/IGNOREFILES is
empty and DIST_SUBDIR is set. [14]
- Fix comment for DISTDIR [15]
- Update the documentation of the USE_GL variable [16]
- Check to see if NONEXISTENT exists, and fail with an error if it does [17]
- Fix fetching of new distfiles in 'make makesum' when SIZE is set [18]
- Consistently set MAKE_ENV when USE_GCC=3.2 or 3.3 are set [19]
- Rework INDEX builds: [20]
* Fix the bsd.port.subdir.mk code that is supposed to report index
breakage (the fallback code wasn't actually being run because make
would halt immediately following the error). This should help with
INDEX error reports because it will immediately show the cause of
failure, so we won't have to pull teeth to extract it from the
submitter.
* Streamline the 'make describe' code a bit.
* Provide some basic instructions to the user when an index build
fails, on when and how to report index build failures (turn this off
with INDEX_QUIET=1)
* Removed INDEX_NOSORT, because I couldn't imagine it to be very
useful and it doesn't cost very much anyway.
* Don't prevent INDEX builds from seeing the local host environment.
Since a lot of users are using 'make index' thesedays they should get
an index that reflects their local settings and installed ports. If
you want to build a 'default' index that isn't influenced by local
settings (e.g. for release builds), set the INDEX_PRISTINE variable.
* Allows parallel INDEX builds (using make -j). The most obvious way
of doing this doesn't work, because I/O from child makes is broken up
into 2k chunks, and output lines from 'make describe' that exceed this
length (*cough* GNOME *cough*) will be intertwined with the output of
other makes, leading to a corrupted INDEX. The I/O interleaving
can be disabled using 'make -P', but this inserts extraneous output of
its own, and redirects stderr, making it useless for our purposes.
Instead, I collect the output from the child make processes in
temporary files and recombine them at the end.
* The number of concurrent make processes to spawn can be set using
INDEX_JOBS. By default this is set to 2, which seems to be a sweet
spot for both single and dual-processor systems. On my tests I do not
see any significant performance changes on UP, but on a dual 4.x
system the build time drops by 47% (6 minute index builds on one test
machine!). Depending on your disk and CPU hardware you might see
further gains with INDEX_JOBS=4 or higher, so you might like to
experiment to see what works best. On a dual 5.x system the
performance gains do not seem to be as great (20-30%), but this is
still a significant net win.
PR: 55493 [1], 59651 [2], 61552 [3], 62247 [4], 62329 [5],
62337 [6], 62422 [7], 62441 [8], 62627 [9], 62983 [10],
63112 [11], 63297 [12], 63335 [13], 64029 [14], 64069 [15],
64236 [16], 64519 [17], 62958 [18], 64237 [19]
Submitted by: lev [1],
Matthew Seaman <m.seaman@infracaninophile.co.uk> [2],
Joel Ray Holveck <joelh@piquan.org> [3],
ade [4], Sergey Matveychuk <sem@ciam.ru> [5],
markus [6], mat [7], des [8], eik [9],
Dmitry Morozovsky <marck@rinet.ru> [10],
Andrew <andrew@ugh.net.au> [11], vs [12], linimon [13],
edwin [14][15], gerald [16], marcus[17][18], kris [19][20]
later, and INDEX on earlier systems. Use this in the 'make index' and
associated targets. This is necessary to deal with the substantially
different dependencies of ports between 4.x and 5.0 (e.g. ports that
depend on perl).
LOCALBASE and X11BASE to bogus values during the index build, so
'make describe' does not pick up packages installed on the system and
change the package name or list of dependencies (this will usually
create a broken INDEX file).
* You can now 'make search' from a ports subdirectory. This will
will restrict the search to ports within this subdirectory.
* Added an additional search option to search just the port names,
e.g. 'make search name=foo' will only return ports that have 'foo' in their
name.
Approved by: asami
(1) Sort INDEX lines since with the new parallel patch, the lines can
come in out of order. (see 2)
Mk/bsd.port.subdir.mk:
(2) Make the targets parallelizable.
Submitted by: hoek
Reviewed by: steve, among others
Mk/bsd.port.mk:
(3) Serious speedup of bsd.port.mk startup. In particular, this helps
cut down "make index" time from an hour and a half to 8 minutes on
our system with a parallel make describe (see 2). Try to pass
unchanged variables down from parent makes instead of rerunning
commands to define them, etc.
Submitted by: hoek
Reviewed by: steve, among others
(4) Change a bunch of "FreeBSD.ORG"s and "freebsd.org"s to "FreeBSD.org".
(5) XFree86 is now at version 3.3.4.
(6) Update for gnome master sites.
Submitted by: mharo
(7) Remove old system tcl check, I don't think people with systems
from way back are still submitting ports.
(8) Fix comment on "make describe" line description (www site was missing).
crowded and I don't want to confuse cvsup about what's in
ports-base and what is not. (I.e., all uppercase
files/directories are, all lowercase ones are not.) While I'm
here, move the make_index script from templates to Tools.
(2) Adjust the MASTER_SITE_OVERRIDE logic a bit. Formerly, it was not
possible to specify both MASTER_SITE_OVERRIDE while still using
MASTER_SITE_BACKUP as a backup, as they were tied in the
implementation of MASTER_SITE_FREEBSD. You can now specify them
independently if MASTER_SITE_FREEBSD is not set (in which case
MASTER_SITE_BACKUP will be moved to the beginning of the list,
like before).
building all packages. This is to be used in conjunction with the scripts
under the "Tools" directory. Note this version has hardcoded paths and
other general badness -- those will be fixed later.
