- Fix build on 9.1 which does not have F_DUPFD_CLOEXEC
Changes:
* status/jail -l: Fix sort(1) error on <10
* Fix crash with SIGINFO done too early in build
* Prevent appending the same make.conf multiple times
* Fix (-s) showing in sanity when pkg is missing
* Fix jail -u
* jail -u: Name the jail with -default so it can be stopped
with jail -k.
* Add ALLOW_MAKE_JOBS_PACKAGES which lets the named package globs
to always run with MAKE_JOBS regardless of ALLOW_MAKE_JOBS. Default
is set to allow 'pkg' and 'ccache' to build with MAKE_JOBS as they
typically holdup the rest of the build.
* No longer run 'make clean' before building a port as it is not needed
due to always using a WRKDIRPREFIX
* Fix -a to work with bad-styled category Makefiles
* sem(4) is only needed on <9
Changes:
* Reduce jail restarting for networking access by now always starting
2 jails. One with networking support and one without. This allows
not constantly restarting jails to enable/disable networking, which
causes a lot of jail lock contention.
* Color support has been added. This is disabled by any of:
1. poudriere -N <sub-command>
2. stdout or stderr NOT in a TTY (piped)
3. USE_COLORS=no in poudriere.conf
* Add DURATION_FORMAT and BUILDTIME_FORMAT to allow changing time
display and default build name.
* madvise(MADV_PROTECT) the main poudriere process to allow it to cleanup
on failure from out-of-swap.
* Running commands as non-root will *auto queue* them to poudriered
if it is running. See rc.d/poudriered.
* HTML/Web major changes:
- Stop polling the server once the build is done.
- There is now a top-level and jail-level page. The top-level only
shows the *latest* build for each jail-ports-set combination.
The jail-level only shows for a specific jail-ports-set combination.
These pages will only be updated with builds done after upgrading.
This may change before 3.1 release using a statsd to populate with
all historical builds as well.
- The main build page has been majorly reworked.
* It no longer has 2 columns which overlap each other when zoomed in.
The site is now much more responsive to zooming and mobile viewing.
* More links to logs and elapsed times are shown
* More system and build stats are shown such as "Impulse" which is
the rate of package building over the last 2-10 minutes. This is
done in browser/js currently so will reset when reloading the page.
- The layout for httpd setup has changed. Now instead of duplicating
the html/assets into every build dir, the html dir from
/usr/local/share/poudriere/html/ should be served directly
and the /data dir should be symlinked or aliased to the equivalent
/usr/local/poudriere/data/logs/bulk/ dir on your system. See
/usr/local/share/examples/poudriere/nginx.conf.sample for an
example nginx setup.
** Note that this is still being improved for 3.1 and may undergo some
backwards-incompatible changes before release.
* status: Major changes.
- By default only show running builds
- Use -a to show all builds, not just latest
- Use -f to show finished builds, only latest
- Add -c for a more compact format
- Displaying the SIGINFO/builder output now requires -b.
- -B/-j/-p/-z can be used to filter the output.
* Show buildtimes in output now.
* TIMESTAMP_LOGS has been improved
* poudriered is no longer installed in sbin/
* Fix MAX_MEMORY so it actually works. Note that this may break openjdk
building.
* Fix incorrect timeout message shown during install phase
* jail -l, ports -l, status: Auto format width of columns to output
* jail: Add back -i support to show information about a jail
* Improvements to fork less often
* testport: Now default to -n. Add -P to test with custom prefix.
* testport -I: Fix longstanding bug of displaying wrong jail -k hint.
* qemu-mips support
* ports: Allow -B with git method
* All the fixes from the 3.0.16 release as well:
* Disable DEVELOPER from make.conf; Poudriere will automatically
set it when appropriate. This prevents testing of port dependencies
that were not requested to be tested.
* distclean: Prevent removing all files by accident.
* Having PKG_REPO_SIGNING_KEY set but the file missing is now fatal.
* kern.securelevel >=1 is now fatal.
* Fix 'kill: No such process' warnings with older /bin/sh (8.x)
* Fix crash on 8.3 due to bug with $(()) handling of _vars (fixed in
base r234001)
* Fix case of packages always rebuilding with "changed options" when
the port has an OPTION defined multiple times (such as fixed in
ports r352512)
* Fix 'Terminated' warning showing at shutdown with older /bin/sh (fixed
by r218105 but never made it to stable/8)
- Move to using pkg-plist
Changes:
This will likely be the last 3.0.x release. 3.1 is almost complete.
* Leftovers checking has moved to Ports Mk/Scripts/check_leftovers.sh,
which allows more consistency and easier maintenance without requiring
a Poudriere release to make changes.
* Staging Orphans has moved to Ports 'make check-plist' for the same
reasons. See r351587 for more information on the new behavior.
The new leftover/orphan code has new %%PLIST%% sub behavior and also
fixes many false-positive orphans, leftovers, and @dirrm showing.
* Fix many races in port cleanup/skip handling.
* Fix crashed builder detection.
* Hide pkg_install EOL warnings and disable WARNING/ERROR waits when
testing
* Disable DEVELOPER from make.conf; Poudriere will automatically
set it when appropriate. This prevents testing of port dependencies
that were not requested to be tested.
* distclean: Prevent removing all files by accident.
* Having PKG_REPO_SIGNING_KEY set but the file missing is now fatal.
* kern.securelevel >=1 is now fatal.
* Fix 'kill: No such process' warnings with older /bin/sh (8.x)
* Fix crash on 8.3 due to bug with $(()) handling of _vars (fixed in
base r234001)
* Fix case of packages always rebuilding with "changed options" when
the port has an OPTION defined multiple times (such as fixed in
ports r352512)
* Fix 'Terminated' warning showing at shutdown with older /bin/sh (fixed
by r218105 but never made it to stable/8)
Changes:
- pkg audit now accepts vuln.xml with multiple package names
- Prefer SONAME instead of filename for library provides
- Do not require dependencies that are self provided
- pkg upgrade can now have a name in argument to only upgrade a given package and its dependencies
- Lots of bug fixes
Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)
bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore
Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier
With hat: portmgr
2014-04-30 x11-toolkits/gigi: Does not compile on 10 or higher
2014-04-30 net/asterisk-oh323: Depends on broken and unsupported asterisk14
2014-04-30 net/asterisk14: Broken and unsupported
2014-04-30 net/asterisk14-addons: Depends on broken and unsupported asterisk14
2014-04-30 ports-mgmt/pkg_install: Replaced by ports-mgmt/pkg
2014-05-01 x11-drivers/xf86-input-magictouch: Does not compile
2014-05-01 x11-drivers/xf86-video-cyrix: requires pciVideoPtr typedef
2014-05-01 x11-drivers/xf86-video-sis-intel: requires pciVideoPtr typedef
2014-05-01 net/py-spreadmodule: Depends on expired net/spread
2014-05-01 net/p5-Spread-Message: Depends on expired net/spread
2014-05-01 net/p5-POE-Component-Spread: Depends on expired net/spread
2014-05-01 net/p5-Spread-Session: Depends on expired net/spread
2014-05-01 sysutils/wmmemload: Broken
2014-05-01 lang/ml-pnet: Alpha-quality abandonware - Decommissioned Dec 2012 - Use mono
2014-05-01 lang/treecc: PNET dependency decommissioned Dec 2012
2014-05-01 lang/pnetlib: Alpha-quality abandonware - Decommissioned Dec 2012 - Use mono
2014-05-01 lang/pnet-base: Alpha-quality abandonware - Decommissioned Dec 2012 - Use mono
2014-05-01 benchmarks/pnetmark: PNET dependency decommissioned Dec 2012
2014-05-01 lang/pnet: Alpha-quality abandonware - Decommissioned Dec 2012 - Use mono
2014-05-01 x11-wm/stumpwm: Broken for more than 4 months
2014-05-01 sysutils/cpupowerd: Not maintained from upstream anymore and only supports ancient AMD K8.
2014-05-01 net/pchar: Obsolete, abandoned
2014-05-03 x11-fonts/texcm-ttf: Should be replaced by x11-fonts/stix-fonts
Changes:
- Document pkg search -U
- Reduce memory usage when loading a package
- Validate package loading against a ucl schema
- Sandbox signature checking with capsicum
- Update man pages
- Be pedantically correct about units and scale factors
- Now uses sqlite full text search extension
- Allow case insensitive search
- Fix pkg add -f
- Lots of fixes in the solver
Changes:
* various: migrate USE_BZIP2 to USES=tar:bzip2
* various: migrate USE_XZ to USES=tar:xz
* multimedia/py-ffmpeg: add and prefer github (GH) as master site
* ports-mgmt/portbuilder: specify license as BSD2CLAUSE (instead of just BSD)
Most ports are updated infrequently so a single batch commit is preferred over
collating changes per port.
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries. Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field. In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.
PR: ports/188759
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
Changes:
- Queue is now priotitized by the dependency-chain
length and not by number of direct dependencies.
- Add PRIORITY_BOOST in poudriere.conf which takes
PKGNAME globs to boost up to the top of the queue.
Example:
PRIORITY_BOOST="apache-openoffice* pypy* mysql-workbench*"
- bulk/testport: Add -k to keep going on test failures.
The failures are stll considered failures but do not skip
further builds depending on that port.
- bulk -at: This now defaults to -k
- Leftovers and Orphan checking now uses the scripts in
ports so we can update them frequently without a poudriere
release and allow Tinderbox to use the same checks. [1]
- This fixes many false-positives with orphans
- Now @dirrm are not shown if they are already in the plist
- Hook-up stage-qa into the tests and remove our redundant
checks.
- testport -i: Fix common double-install error
- Fix leftover mtree not showing all results when a directory
is modified. I.e., changed user and group, only one of which
was showing.
- bulk -a: Don't consider missing origins as fatal.
- Rework distfile handling to be more atomic
- Fix many race conditions with cleanup after
port build, especially with skipping ports.
- Optimize port cleanup after builds
- Speedup compute_deps
- Fix crashed build detection (commonly shows as
"unknown stuck queue bug")
- status: Fix regression causing it to not work with multiple
builds at once
[1] It's possible we may change the format of the scripts in ports
once Tinderbox integrates with them. If this happens you will
need to update poudriere-devel.
* Remove www.freebsd.org/~$user check from urlcheck()
* Remove 'in the module alias name' warning
* Remove 'binary -ko'
* Silence warnings in case if svn binary does not exist (try 2)
* Use more strict regexp for share/doc detection
* Add sdl-config to direct commands check
* Fix phase 2 of direct use of pathnames check
* Ignore comments in direct use of pathnames check
* Support nested knobs in plist for OPTIONS_SUB check
* Add check for @dirrm(try) libdata/pkgconfig in plist
* Remove USE_MESA, INSTALLS_SHLIB, APACHE_COMPAT, USE_XPM from deprecated
macro check
* Fix 'Consider adding support for a NLS knob to conditionally disable gettext'
warning in the case of use 'NLS_USES= gettext'
PR: 188389
Submitted by: ak
2014-04-16 ports-mgmt/pkgsearch: Upstream disappeared
2014-04-17 science/flounder: Unmaintained since 2002
2014-04-17 security/nbaudit: Unmaintained since 2002
2014-04-17 security/saint: Unmaintained since 2002
2014-04-17 graphics/gozer: Unmaintained since 2002
2014-04-17 misc/pdfmap: Unmaintained since 2002
2014-04-17 devel/showgrammar: Unmaintained since 2002
2014-04-17 biology/libgenome: Unmaintained since 2002
2014-04-17 deskutils/narval: Unmaintained since 2002
2014-04-17 devel/fampp: Unmaintained since 2002
2014-04-17 net-p2p/py-fngrab: Unmaintained since 2002
2014-04-17 misc/wmfirew: Unmaintained since 2002
2014-04-17 x11-wm/e16utils: Unmaintained since 2002
2014-04-17 misc/salias: Unmaintained since 2002
2014-04-17 print/latex2slides: Unmaintained since 2002
2014-04-17 lang/sxm: Unmaintained since 2002
2014-04-17 textproc/pybook: Unmaintained since 2002
2014-04-17 mail/mailcrypt: Unmaintained since 2002
2014-04-17 japanese/elvis: Unmaintained since 2002
2014-04-17 devel/prototype: Unmaintained since 2002
2014-04-17 print/wprint: Unmaintained since 2002
2014-04-17 science/euler: Unmaintained since 2002
2014-04-17 multimedia/gopchop: Unmaintained since 2002
2014-04-17 science/gdis: Unmaintained since 2002
2014-04-17 net/googolplex: Unmaintained since 2002
2014-04-17 lang/logo: Unmaintained since 2002
2014-04-17 textproc/roap: Unmaintained since 2002
2014-04-17 x11-wm/afterstep-i18n: Unmaintained since 2002
2014-04-17 games/yamsweeper: Unmaintained since 2002
2014-04-17 net-mgmt/echolot: Unmaintained since 2002
2014-04-17 security/pam_smb: Unmaintained since 2002
2014-04-18 devel/lua-redis-parser: Broken for more than 6 months
2014-04-18 biology/finchtv: Broken for more than 6 months
2014-04-18 net-im/ari-yahoo: Broken for more than 1 year (http://www.icculus.org/ari-yahoo/)
Changes:
- Detect invalid packages that list directories in plist
- new pkg_emit_query_(yesno|select) to allow the library to ask question to the user
- Reinstall packages on upgrade if remote abi changed (this catches up automatically major upgrade of freebsd)
- Ability the specify the file to read the ABI from
- add --relocate to pkg add and register (this is totally unsafe to use a a normal user, it is intended to be used in the ports tree)
- clean/improvements in the repo handling functions
- validate the directory is actually a port directory when running pkg version against the ports tree
- new pkg audit -f <file> to run pkg audit against a local file
- pkg -j and pkg -c are now able to restart themself
- pkg version against the ports tree now works even if current working directory has been deleted out from underneath us.
- Improved pkg upgrade/install/delete output
- Improve cache handling
- Make pkg update more verbose
- new RUN_SCRIPTS options (default on) to be able to switch of the running pre/post operation scripts
Changes:
- pkg create uses a readonly lock
- pkg create returns non 0 is package creation failed
- rework the cache so that is avoid collision with multirepo and avoid warning the users harmless checksum retry
- do not cache anymore files when using file:// scheme
- Preserve automatic flags of local packages.
- Use installed provides if possible.
- Fix local and remote logic for provides and conflicts.
- Optimize SAT solving slightly.
- Make duplicate-related warning fatal in developer mode
- Continue turning the public api into pkg_objects
Changes:
- pkg delete is not recursive by default
- pkg delete ui now explain why a package will be removed
- pkg which now handle PATH when looking for a file
- shared libraries are now directly resolved in the solver (no need anymore for explicit package dependency)
9.x in order to prevent run-time breakage after the recent changes in
libiconv
- Bump port revision for lang/ghc and all dependents, as a consequence
Obtained from: FreeBSD Haskell
Changes:
- Added ability to install packages with missing dependencies
- Do not enter in a sandbox if the database is open
- Do not count the lock owner as lock blocker.
- Lots of rework and fixes to improve the solver when trying to upgrade very old package database.
* Improvement of the pkgng detection logic [1]
* Improvement of the speed of "pkg_replace -a" [2]
PR: ports/187723
Submitted by: Ken DEGUCHI <kdeguchi@sz.tokoha-u.ac.jp> (maintainer)
Requested by: Michael Gmelin <freebsd@grem.de> [1], Martin Dieringer <martin.dieringer@gmx.de> [2]
- Cleanup Makefile to use pkg-plist [1]
Changes:
- make_index fixes (use ports/portsnap version now)
- Documentation updates
- Use autotools for build
- All incremental messages are in a consistent format now.
- New daemon poudriered using libucl with fine-grained permissions, but
not yet hooked up or documented. It will be hooked up to poudriere-queue
and documented soon.
- Add an nc(1) wrapper to work around src change r249499.
- status: Add -H for scripted mode
- status: Show URL if available
- Allow to specify revision when running poudriere jail -u with svn method
with -t
- bulk: Add -i and -I for interactive testing of all specified ports at once,
requires ports r348859 change to Mk/bsd.port.mk.
- Report modification of directories during leftover check (owner or
permission changed).
- Fix ipv6 only usage
- Ensure /sbin and /usr/sbin are in PATH when running
- Remove trailing slashes from listed_ports.
- Exit quicker after ^C during packaging phases by killing pkg-static
- Fix child process cleanup logic to only sleep if child still running.
- Always dismount filesystems and try cleaning up when exiting and in jail -k
- For stage_orphans, ignore modified files (such as nobody vs root)
- testport -I: Mark cleanup done, not as recursively failing
- testport -i: Use a local.conf instead of PACKAGESITE
- testport -I: Suggest same login method which is more sane/clean than exec
/bin/sh
- options: Require dialog4ports as it runs from host and
jail may be for a different ARCH
- Ignore parents of home directories too during leftovers check
- Restrict ZFS on 9.0/9.1 due to known deadlock
- bulk: Parse MOVED for given port build list
- Add support for svnlite and overriding SVN_CMD
- Show warning when jail is newer than host
- Show host/jail OSVERSION in build logs
Submitted by: Johannes Jost Meixner <xmj@chaot.net> [1] (based on)
PR: ports/187373 [1]
Changes:
- Reimport old pkg add (aliasing it to install was too optimistic at the moment)
- Fix pkg install ./file with package lacking the manifestdigest information)
- Fix a bug resulting in "pkg-static: sqlite: no such savepoint: upgrade"
