--- CONFIG.orig	Fri Jul 16 23:26:29 1999
+++ CONFIG	Sat Oct  2 22:15:45 1999
@@ -8,14 +8,14 @@
 # Debug messages turned on by -x key are written here.
 # Some error messages may occationally appear here too.
 # This may be changed in the 'config' file.
-DEBUGFILE   = "/var/log/ifmail/ifdebug"
+DEBUGFILE   = "/var/spool/ifmail/ifdebug"
 
 # Procession log. Usually gets several lines for each invocation.
 # Also look for error diagnostics here.  If HAS_SYSLOG defined,
 # only stdout and stderr from the packers and unpackers go to this
 # file, while actual logging is done via syslog() calls.
 # This may be changed in the 'config' file.
-LOGFILE     = "/var/log/ifmail/iflog"
+LOGFILE     = "/var/spool/ifmail/iflog"
 
 # Use syslog() facility codes for mail gate, news gate and ifcico.
 # Define -DHAS_SYSLOG (see below)
@@ -27,13 +27,13 @@
 CICOLOG    = LOG_LOCAL0
 
 # Directory where UUCP lock files reside.
-#LOCKDIR     = "/var/spool/uucp"
-LOCKDIR     = "/var/lock"
+LOCKDIR     = "/var/spool/lock"
+#LOCKDIR     = "/var/lock"
 
 # Directory from which file requests are resolved.
 # This may be changed from the 'config' file.
-#PUBDIR      = "/home/ftp/pub"
-PUBDIR      = "/var/spool/uucppublic"
+PUBDIR      = "/home/ftp/pub"
+#PUBDIR      = "/var/spool/uucppublic"
 
 # News spool directory (to check space only)
 #NEWSSPOOL   = "/usr/spool/news"
@@ -152,20 +152,20 @@
 # system, usually "-DINT32=long -DINT16=short"
 
 # Linux/x86:  (remove -DHAS_BSD_SIGNALS if you have libc5 (not glibc2))
-OPTS        = -DHAS_STATFS -DSTATFS_IN_VFS_H -DHAS_SETSID -DHAS_NDBM_H \
-		-DDONT_HAVE_TM_GMTOFF -DHAS_TERMIOS_H -DASCII_LOCKFILES \
-		-DHAS_FSYNC -DHAS_IOCTL_H -DHAS_REGEX_H -DHAS_TCP \
-		-DFORCEINTL -DHAS_SYSLOG -DNEED_UUCPFROM -DNEED_BSY \
-		-DSLAVE_SENDS_NAK_TOO -DNEED_FORK -DHAS_BSD_SIGNALS \
-		-DHAS_BSD_DB -DINT32=long -DINT16=short
+#OPTS        = -DHAS_STATFS -DSTATFS_IN_VFS_H -DHAS_SETSID -DHAS_NDBM_H \
+#		-DDONT_HAVE_TM_GMTOFF -DHAS_TERMIOS_H -DASCII_LOCKFILES \
+#		-DHAS_FSYNC -DHAS_IOCTL_H -DHAS_REGEX_H -DHAS_TCP \
+#		-DFORCEINTL -DHAS_SYSLOG -DNEED_UUCPFROM -DNEED_BSY \
+#		-DSLAVE_SENDS_NAK_TOO -DNEED_FORK -DHAS_BSD_SIGNALS \
+#		-DHAS_BSD_DB -DINT32=long -DINT16=short
 
 # 386BSD:
-#OPTS        = -DHAS_STATFS -DSTATFS_IN_MOUNT_H -DHAS_SETSID -DHAS_NDBM_H \
-#		-DHAS_TERMIOS_H -DASCII_LOCKFILES -DHAS_FSYNC -DHAS_IOCTL_H \
-#		-DHAS_REGEX_H -DHAS_TCP -DHAS_SYSLOG -DNEED_UUCPFROM \
-#		-DNEED_BSY -DNEED_FORK -DNEGATIVE_SEEK_BUG \
-#		-DHAS_SYS_ERRLIST -DHAS_BSD_SIGNALS \
-#		-DINT32=long -DINT16=short
+OPTS        = -DHAS_STATFS -DSTATFS_IN_MOUNT_H -DHAS_SETSID -DHAS_NDBM_H \
+		-DHAS_TERMIOS_H -DASCII_LOCKFILES -DHAS_FSYNC -DHAS_IOCTL_H \
+		-DHAS_REGEX_H -DHAS_TCP -DHAS_SYSLOG -DNEED_UUCPFROM \
+		-DNEED_BSY -DNEED_FORK -DNEGATIVE_SEEK_BUG \
+		-DHAS_SYS_ERRLIST -DHAS_BSD_SIGNALS \
+		-DINT32=long -DINT16=short
 
 # SVR4:
 #OPTS        = -DHAS_STATVFS -DDONT_HAVE_TM_GMTOFF -DHAS_SETSID -DHAS_NDBM_H \
@@ -222,7 +222,7 @@
 #		-DNEED_BSY -DSLAVE_SENDS_NAK_TOO -DINT32=int -DINT16=short
 
 # for make install, where to put binaries and what owner to set
-BINDIR = /usr/lib/ifmail
+BINDIR = ${PREFIX}/libexec/ifmail
 OWNER = ifmail
 GROUP = uucp
 MODE = 0711
@@ -242,7 +242,7 @@
 TAR = tar
 
 #CFLAGS = -g -Wall
-# Linux, 386BSD, SunOS:
+# Linux, 386BSD, FreeBSD, SunOS:
 CFLAGS = -g -O2 -Wall
 # SVR4:
 #CFLAGS = -O -Xa
@@ -261,7 +261,7 @@
 # Linux w/libc5
 #LIBS = -lgdbm
 # Linux w/glibc
-LIBS = -lndbm
+#LIBS = -lndbm
 # SunOS:
 #LIBS =
 # Solaris:
@@ -276,6 +276,9 @@
 #LIBS = -lcposix -lmalloc -ldbm -linet -lPW
 # NeXTSTEP
 #LIBS = -lgdbm -lposix
+# FreeBsd:
+LIBS = -lgnuregex
+
 
 INCLUDES = -I${INCDIR}
 # ISC