1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-11-30 01:15:52 +00:00
freebsd-ports/Mk/bsd.efl.mk
Max Brazhnikov b9eaf39433 - Update E17 ports:
EFL updated to 1.1.0 and E17 updated to 0.16.999.65643 (svn 65643)
- Pass maintainership to submitter.
- New ports:
	benchmarks/expedite
	devel/eio
	graphics/evas-loader-generic
	graphics/evas-loader-ico
	graphics/evas-loader-psd
	graphics/evas-loader-wbmp
	graphics/evas_generic_loaders-gst
	graphics/evas_generic_loaders-pdf
	graphics/evas_generic_loaders-ps
	graphics/evas_generic_loaders-raw
	graphics/evas_generic_loaders-xcf
	x11-wm/e17-module-comp-scale
	x11-wm/e17-module-e-tiling
	x11-wm/e17-module-elfe
	x11-wm/e17-module-everything-aspell
	x11-wm/e17-module-everything-shotgun
	x11-wm/e17-module-xkbswitch

PR:		ports/167405
Submitted by:	Grzegorz Blach <magik at roorback.net>
2012-06-26 17:36:30 +00:00

438 lines
10 KiB
Makefile

#
# $MBSDlabs: portmk/bsd.efl.mk,v 1.17 2006/10/02 14:57:48 stas Exp $
# $FreeBSD$
#
# bsd.efl.mk - Support for Enlightenment Foundation Libraries (EFL)
#
# Author: Stanislav Sedov <stas@FreeBSD.org>
# Inspired by bsd.sdl.mk by Edwin Groothuis <edwin@freebsd.org>
#
# You can specify EFL-related library dependency using "USE_EFL=" statement,
# e.g. "USE_EFL= ecore evas" will add x11/ecore and graphics/evas as dependency
# for your port.
# You can check existency of certain library throught "WANT_EFL/HAVE_EFL" pair.
# Note: WANT_EFL should be defined before including <bsd.port.pre.mk>, and
# HAVE_EFL variable could be tested after it. For example:
#
# WANT_EFL= yes
# .include <bsd.port.pre.mk>
# .if ${HAVE_EFL:Mevas}
# USE_EFL+= evas
# .endif
#
# Currently recognized variables are:
# USE_EFL - lists all EFL libraries which port depends on
# WANT_EFL - the port wants to test which of EFL libraries are installed
# on the target system
#
# The following variables could be tested after inclusion of bsd.port.pre.mk:
# HAVE_EFL - lists all EFL libraries which are available on target system
#
# Feel free to send any comments and suggestion to maintainer.
#
EFL_Include_MAINTAINER= magik@roorback.net
#
# Define all supported libraries
#
_USE_EFL_ALL= ecore edbus edje eet efreet eio eina elementary embryo emotion \
epeg evas imlib2
# For each library supported we define the following variables:
# _%%LIB%%_CATEGORY - category the port belongs to
# _%%LIB%%_DEPENDS - other EFL libraries the library
# itself depends on. We'll define them explicitly
# to handle unwanted deinstalls.
# _%%LIB%%_PREFIX - where the library is installed
# _%%LIB%%_VERSION - version of the shared library
# _%%LIB%%_SLIB - name of the shared library
#
_ecore_CATEGORY= devel
_ecore_DEPENDS= eina
_ecore_PORTNAME= ecore-main
_ecore_VERSION= 2
_edbus_CATEGORY= devel
_edbus_PORTNAME= e_dbus
_edbus_VERSION= 2
_eet_CATEGORY= devel
_eet_DEPENDS= eina
_eet_VERSION= 6
_efreet_CATEGORY= x11
_efreet_DEPENDS= ecore eina
_efreet_VERSION= 2
_edje_CATEGORY= graphics
_edje_DEPENDS= ecore eet embryo evas
_edje_VERSION= 2
_eio_CATEGORY= devel
_eio_DEPENDS= ecore eina
_eio_VERSION= 1
_eina_CATEGORY= devel
_eina_VERSION= 2
_elementary_CATEGORY= x11-toolkits
_elementary_DEPENDS= ecore embryo edje
_elementary_VERSION= 8
_embryo_CATEGORY= lang
_embryo_DEPENDS= eina
_embryo_VERSION= 2
_emotion_CATEGORY= multimedia
_emotion_DEPENDS= ecore edje eet eio embryo evas
_emotion_VERSION= 2
_epeg_CATEGORY= graphics
_epeg_VERSION= 9
_evas_CATEGORY= graphics
_evas_DEPENDS= eina eet
_evas_PORTNAME= evas-core
_evas_VERSION= 2
_imlib2_CATEGORY= graphics
_imlib2_VERSION= 5
_imlib2_SLIB= Imlib2
#
# Assign values for variables which were not defined explicitly
#
.for LIB in ${_USE_EFL_ALL}
. if !defined(_${LIB}_DEPENDS)
_${LIB}_DEPENDS= #empty
. endif
. if !defined(_${LIB}_SLIB)
_${LIB}_SLIB=${LIB}
. endif
. if !defined(_${LIB}_PORTNAME)
_${LIB}_PORTNAME=${LIB}
. endif
. if !defined(_${LIB}_PREFIX)
_${LIB}_PREFIX=${LOCALBASE}
. endif
.endfor
#
# Evas engines and loaders support.
# Values processed:
# _evas_engine_COMP_CATEGORY - Where the port for this object is located
# _evas_engine_COMP_PORTNAME - Object's port subdirectory
# _evas_engine_COMP_DIR - Evas object's subdir
#
# All components that are currently supported
_EFL_EVAS_ENGINES_ALL= buffer opengl sdl x11
_EFL_EVAS_LOADERS_ALL= bmp edb eet gif ico jpeg png pmaps psd svg tga tiff wbmp xpm
#
# Generic evas engines definitions
#
_EFL_EVAS_CATEGORY= graphics
_EFL_EVAS_MODDIR= ${LOCALBASE}/lib/evas/modules/
_EFL_EVAS_ENGINES_MODDIR= ${_EFL_EVAS_MODDIR}/engines/
_EFL_EVAS_LOADERS_MODDIR= ${_EFL_EVAS_MODDIR}/loaders/
#
# Evas engine modules definitions
#
_evas_engine_buffer_DIR= buffer
_evas_engine_opengl_DIR= gl_x11
_evas_engine_sdl_DIR= software_sdl
_evas_engine_x11_DIR= software_x11
#
# Assign values for variables which were not defined explicitly
#
.for COMP in ${_EFL_EVAS_ENGINES_ALL}
. if !defined(_evas_engine_${COMP}_CATEGORY)
_evas_engine_${COMP}_CATEGORY= ${_EFL_EVAS_CATEGORY}
. endif
. if !defined(_evas_engine_${COMP}_PORTNAME)
_evas_engine_${COMP}_PORTNAME= evas-engine-${COMP}
. endif
. if !defined(_evas_engine_${COMP}_DIR)
_evas_engine_${COMP}_DIR= ${COMP}
. endif
.endfor
.for COMP in ${_EFL_EVAS_LOADERS_ALL}
. if !defined(_evas_loader_${COMP}_CATEGORY)
_evas_loader_${COMP}_CATEGORY= ${_EFL_EVAS_CATEGORY}
. endif
. if !defined(_evas_loader_${COMP}_PORTNAME)
_evas_loader_${COMP}_PORTNAME= evas-loader-${COMP}
. endif
. if !defined(_evas_loader_${COMP}_DIR)
_evas_loader_${COMP}_DIR= ${COMP}
. endif
.endfor
#
# Ecore modules support
# Values processed:
# _ecore_COMP_CATEGORY - Where the port for this object is located
# _ecore_COMP_PORTNAME - Object's port subdirectory
# _ecore_COMP_NAME - Ecore library name
#
# All components that are currently supported
_EFL_ECORE_ALL= con config desktop evas file imf imf_evas input \
input_evas ipc job sdl txt x11
#
# Generic ecore definitions
#
_EFL_ECORE_CATEGORY= devel
_EFL_ECORE_MODDIR= ${LOCALBASE}/lib/
#
# Ecore modules definitions
#
_ecore_con_CATEGORY= net
_ecore_config_CATEGORY= sysutils
_ecore_desktop_CATEGORY= x11
_ecore_evas_CATEGORY= graphics
_ecore_sdl_CATEGORY= graphics
_ecore_txt_CATEGORY= converters
_ecore_imf_CATEGORY= x11
_ecore_imf_evas_CATEGORY= x11
_ecore_input_CATEGORY= x11
_ecore_input_evas_CATEGORY= x11
_ecore_x11_CATEGORY= x11
_ecore_x11_NAME= ecore_x
#
# Assign values for variables which were not defined explicitly
#
.for COMP in ${_EFL_ECORE_ALL}
. if !defined(_ecore_${COMP}_CATEGORY)
_ecore_${COMP}_CATEGORY= ${_EFL_ECORE_CATEGORY}
. endif
. if !defined(_ecore_${COMP}_PORTNAME)
_ecore_${COMP}_PORTNAME= ecore-${COMP}
. endif
. if !defined(_ecore_${COMP}_NAME)
_ecore_${COMP}_NAME= ecore_${COMP}
. endif
.endfor
#
# Handle WANT_EFL feature
#
.if !defined(AFTERPORTMK)
.if !defined(EFL_Include_pre)
EFL_Include_pre= bsd.efl.mk
HAVE_EFL?=
HAVE_EFL_ECORE?=
.if defined(WANT_EFL)
#
# General EFL components
#
. for LIB in ${_USE_EFL_ALL}
. if exists(${_${LIB}_PREFIX}/lib/lib${_${LIB}_SLIB}.so.${_${LIB}_VERSION})
HAVE_EFL+= ${LIB}
. endif
. endfor
#
# Ecore components
#
. for COMP in ${_EFL_ECORE_ALL}
. if exists(${_ecore_PREFIX}/lib/lib${_ecore_${COMP}_NAME}.so.${_ecore_VERSION})
HAVE_EFL_ECORE+= ${COMP}
. endif
. endfor
.endif
.endif #EFL_Include_pre
.endif #AFTERPORTMK
#
# Handle USE_EFL, USE_EFL_EVAS_* and USE_EFL_ECORE features
#
.if !defined(BEFOREPORTMK)
.if !defined(EFL_Include_post)
.if defined(USE_EFL_EVAS_ENGINES)
USE_EFL+= evas
_USE_EFL_EVAS_ENGINES= #empty
. for COMP in ${USE_EFL_EVAS_ENGINES}
. if ${_EFL_EVAS_ENGINES_ALL:M${COMP}}==""
IGNORE= cannot install: unknown evas engine ${COMP}
. else
_USE_EFL_EVAS_ENGINES+= ${COMP}
. endif
. endfor
# Get rid of duplicates
_USE_EFL_EVAS_ENGINES_UQ= #empty
. for COMP in ${_USE_EFL_EVAS_ENGINES}
. if ${_USE_EFL_EVAS_ENGINES_UQ:M${COMP}}==""
_USE_EFL_EVAS_ENGINES_UQ+= ${COMP}
. endif
. endfor
. for COMP in ${_USE_EFL_EVAS_ENGINES_UQ}
BUILD_DEPENDS+= ${_EFL_EVAS_ENGINES_MODDIR}/${_evas_engine_${COMP}_DIR}/freebsd${OSREL}-${ARCH}/module.so:${PORTSDIR}/${_evas_engine_${COMP}_CATEGORY}/${_evas_engine_${COMP}_PORTNAME}
RUN_DEPENDS+= ${_EFL_EVAS_ENGINES_MODDIR}/${_evas_engine_${COMP}_DIR}/freebsd${OSREL}-${ARCH}/module.so:${PORTSDIR}/${_evas_engine_${COMP}_CATEGORY}/${_evas_engine_${COMP}_PORTNAME}
. endfor
.endif #USE_EFL_EVAS_ENGINES
.if defined(USE_EFL_EVAS_LOADERS)
USE_EFL+= evas
_USE_EFL_EVAS_LOADERS= #empty
. for COMP in ${USE_EFL_EVAS_LOADERS}
. if ${_EFL_EVAS_LOADERS_ALL:M${COMP}}==""
IGNORE= cannot install: unknown evas loader ${COMP}
. else
_USE_EFL_EVAS_LOADERS+= ${COMP}
. endif
. endfor
# Get rid of duplicates
_USE_EFL_EVAS_LOADERS_UQ= #empty
. for COMP in ${_USE_EFL_EVAS_LOADERS}
. if ${_USE_EFL_EVAS_LOADERS_UQ:M${COMP}}==""
_USE_EFL_EVAS_LOADERS_UQ+= ${COMP}
. endif
. endfor
. for COMP in ${_USE_EFL_EVAS_LOADERS_UQ}
BUILD_DEPENDS+= ${_EFL_EVAS_LOADERS_MODDIR}/${_evas_loader_${COMP}_DIR}/freebsd${OSREL}-${ARCH}/module.so:${PORTSDIR}/${_evas_loader_${COMP}_CATEGORY}/${_evas_loader_${COMP}_PORTNAME}
RUN_DEPENDS+= ${_EFL_EVAS_LOADERS_MODDIR}/${_evas_loader_${COMP}_DIR}/freebsd${OSREL}-${ARCH}/module.so:${PORTSDIR}/${_evas_loader_${COMP}_CATEGORY}/${_evas_loader_${COMP}_PORTNAME}
. endfor
.endif #USE_EFL_EVAS_LOADERS
.if defined(USE_EFL_ECORE)
USE_EFL+= ecore
_USE_EFL_ECORE= #empty
. for COMP in ${USE_EFL_ECORE}
. if ${_EFL_ECORE_ALL:M${COMP}}==""
IGNORE= cannot install: unknown ecore module ${COMP}
. else
_USE_EFL_ECORE+= ${COMP}
. endif
. endfor
# Get rid of duplicates
_USE_EFL_ECORE_UQ= #empty
. for COMP in ${_USE_EFL_ECORE}
. if ${_USE_EFL_ECORE_UQ:M${COMP}}==""
_USE_EFL_ECORE_UQ+= ${COMP}
. endif
. endfor
. for COMP in ${_USE_EFL_ECORE_UQ}
LIB_DEPENDS+= ${_ecore_${COMP}_NAME}.${_ecore_VERSION}:${PORTSDIR}/${_ecore_${COMP}_CATEGORY}/${_ecore_${COMP}_PORTNAME}
. endfor
.endif #USE_EFL_ECORE
.if defined(USE_EFL)
EFL_Include_post= bsd.efl.mk
#
# Check if we have all libraries requiested and build depends list
#
.if ${USE_EFL:Mlibrt_hack}
_USE_EFL_LIBRT_HACK= yes
.endif
.if ${USE_EFL:Mmodarch_hack}
_USE_EFL_MODARCH_HACK= yes
.endif
.if ${USE_EFL:Mlibtool_hack}
_USE_EFL_LIBTOOL_HACK= yes
.endif
_USE_EFL= #empty
.for LIB in ${USE_EFL:Nlibrt_hack:Nmodarch_hack:Nlibtool_hack}
. if ${_USE_EFL_ALL:M${LIB}}==""
IGNORE= cannot install: unknown library ${LIB}
. else
_USE_EFL+= ${_${LIB}_DEPENDS} ${LIB}
. endif
.endfor
#
# Get rid of duplicates
#
_USE_EFL_UQ= #empty
.for LIB in ${_USE_EFL}
. if ${_USE_EFL_UQ:M${LIB}}==""
_USE_EFL_UQ+= ${LIB}
. endif
.endfor
#
# define dependencies
#
.for LIB in ${_USE_EFL_UQ}
LIB_DEPENDS+= ${_${LIB}_SLIB}.${_${LIB}_VERSION}:${PORTSDIR}/${_${LIB}_CATEGORY}/${_${LIB}_PORTNAME}
.endfor
#
# Initialize configure enviropment
#
CPPFLAGS+= -I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
CFLAGS+= -I${LOCALBASE}/include
PLIST_SUB+= E17_ARCH=freebsd${OSREL}-${ARCH}
.if defined(_USE_EFL_LIBRT_HACK)
#
# Don't use librt
#
post-patch: efl_drop_librt
efl_drop_librt:
@${REINPLACE_CMD} -E \
-e '/^[[:space:]]+freebsd\*/,/^[[:space:]];;/s/-lrt//g' \
${WRKSRC}/configure
.endif
.if defined(_USE_EFL_MODARCH_HACK)
#
# Use correct module arch path
#
post-patch: efl_patch_modarch
efl_patch_modarch:
@${REINPLACE_CMD} -E \
-e 's/(MODULE_ARCH="\$$host_os-\$$host_cpu)-[^"]+"/\1"/g' \
-e 's/(MODULE_EDJE="\$$host_os-\$$host_cpu)-[^"]+"/\1"/g' \
${WRKSRC}/configure
.endif
.if defined(_USE_EFL_LIBTOOL_HACK)
#
# Get rid of .la and static library files
#
post-configure: efl_drop_la
efl_drop_la:
${REINPLACE_CMD} -E -e \
'/Install the pseudo-library/,/staticlibs=/s,^,#,' ${WRKSRC}/libtool
.endif
.endif #USE_EFL
.endif #EFL_Include_post
.endif #BEFOREPORTMK