mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-11-29 01:13:08 +00:00
Code Issues Releases Activity
8635d31369
freebsd-ports/Mk/Uses/perl5.mk
Sunpoet Po-Chuan Hsieh 166d24f12c - Use leading "-" to ignore exit status instead of trailing "|| ${TRUE}" 
Suggested by:	mat
2013-10-27 17:35:52 +00:00

267 lines
8.7 KiB
Makefile
Raw Blame History

# $FreeBSD$
#
# Provide support to use perl5
#
# MAINTAINER: perl@FreeBSD.org
#
# PERL5 - Set to full path of perl5, either in the system or
# installed from a port.
# PERL - Set to full path of perl5, either in the system or
# installed from a port, but without the version number.
# Use this if you need to replace "#!" lines in scripts.
# PERL_VERSION - Full version of perl5 (see below for current value).
#
# PERL_VER - Short version of perl5 (major.minor without patchlevel)
#
# PERL_LEVEL - Perl version as an integer of the form MNNNPP, where
# M is major version, N is minor version, and P is
# the patch level. E.g., PERL_VERSION=5.14.4 would give
# a PERL_LEVEL of 501404. This can be used in comparisons
# to determine if the version of perl is high enough,
# whether a particular dependency is needed, etc.
# PERL_ARCH - Directory name of architecture dependent libraries
# (value: mach).
# PERL_PORT - Name of the perl port that is installed
# (value: perl5.14)
# SITE_PERL - Directory name where site specific perl packages go.
# This value is added to PLIST_SUB.
# USE_PERL5 - If set, this port uses perl5 in one or more of the extract,
# patch, build, install or run phases.
# It can also have configure, modbuild and modbuildtiny when
# the port needs to run Makefile.PL, Build.PL and a
# Module::Build::Tiny flavor of Build.PL.
.if !defined(_INCLUDE_USES_PERL5_MK)
_INCLUDE_USES_PERL5_MK= yes
.if defined(perl5_ARGS)
IGNORE= Incorrect 'USES+=perl5:${perl5_ARGS}' perl5 takes no arguments
.endif
USE_PERL5?= run build
.if exists(${LOCALBASE}/bin/perl5)
.sinclude "${LOCALBASE}/etc/perl5_version"
.if !defined(PERL_VERSION)
PERL_VERSION!= perl -e 'printf "%vd\n", $$^V;'
.endif
.else
.include "${PORTSDIR}/Mk/bsd.default-versions.mk"
.if ${PERL5_DEFAULT} == 5.12
PERL_VERSION= 5.12.5
.elif ${PERL5_DEFAULT} == 5.14
PERL_VERSION= 5.14.4
.elif ${PERL5_DEFAULT} == 5.16
PERL_VERSION= 5.16.3
.elif ${PERL5_DEFAULT} == 5.18
PERL_VERSION= 5.18.1
.else
IGNORE= Invalid perl5 version ${PERL5_DEFAULT}
.endif
.endif
PERL_VER?= ${PERL_VERSION:C/\.[0-9]+$//}
.if !defined(PERL_LEVEL) && defined(PERL_VERSION)
perl_major= ${PERL_VERSION:C|^([1-9]+).*|\1|}
_perl_minor= 00${PERL_VERSION:C|^([1-9]+)\.([0-9]+).*|\2|}
perl_minor= ${_perl_minor:C|^.*(...)|\1|}
.if ${perl_minor} >= 100
perl_minor= ${PERL_VERSION:C|^([1-9]+)\.([0-9][0-9][0-9]).*|\2|}
perl_patch= ${PERL_VERSION:C|^.*(..)|\1|}
.else # ${perl_minor} < 100
_perl_patch= 0${PERL_VERSION:C|^([1-9]+)\.([0-9]+)\.*|0|}
perl_patch= ${_perl_patch:C|^.*(..)|\1|}
.endif # ${perl_minor} < 100
PERL_LEVEL= ${perl_major}${perl_minor}${perl_patch}
.else
PERL_LEVEL=0
.endif # !defined(PERL_LEVEL) && defined(PERL_VERSION)
PERL_ARCH?= mach
# there must always be a default to prevent dependency failures such
# as "ports/lang: not found"
.if ${PERL_LEVEL} >= 501800
PERL_PORT?= perl5.18
.elif ${PERL_LEVEL} >= 501600
PERL_PORT?= perl5.16
.elif ${PERL_LEVEL} >= 501400
PERL_PORT?= perl5.14
.else # ${PERL_LEVEL} < 501400
PERL_PORT?= perl5.12
.endif
SITE_PERL_REL?= lib/perl5/site_perl/${PERL_VER}
SITE_PERL?= ${LOCALBASE}/${SITE_PERL_REL}
PERL5= ${LOCALBASE}/bin/perl${PERL_VERSION}
PERL= ${LOCALBASE}/bin/perl
# Define the want perl first if defined
.if ${USE_PERL5:M5*}
want_perl_sign= ${USE_PERL5:M5*:C|^[0-9.]+||}
want_perl_ver= ${USE_PERL5:M5*:S|${want_perl_sign}$||}
want_perl_major= ${want_perl_ver:C|\..*||}
_want_perl_minor= ${want_perl_ver:S|^${want_perl_major}||:S|^.||:C|\..*||}
_want_perl_patch= ${want_perl_ver:S|^${want_perl_major}||:S|^.${_want_perl_minor}||:S|^.||:C|\..*||}
want_perl_minor= ${_want_perl_minor:S|^|000|:C|.*(...)|\1|}
want_perl_patch= ${_want_perl_patch:S|^|00|:C|.*(..)|\1|}
USE_PERL5_LEVEL= ${want_perl_major}${want_perl_minor}${want_perl_patch}
.endif
# All but version
_USE_PERL5= ${USE_PERL5:N5*}
# Mask unspecified components. E.g. this way "5" will match any "5.x.x".
.if empty(_want_perl_minor)
masked_PERL_LEVEL= ${PERL_LEVEL:C|(.....)$|00000|}
.elif empty(_want_perl_patch)
masked_PERL_LEVEL= ${PERL_LEVEL:C|(..)$|00|}
.else
masked_PERL_LEVEL= ${PERL_LEVEL}
.endif
.if defined(want_perl_sign)
.if ${want_perl_sign} == "+"
.if ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
USE_PERL5_REASON?= requires Perl ${want_perl_ver} or later, install lang/perl${want_perl_major}.${want_perl_minor:C|^0||} and try again
IGNORE= ${USE_PERL5_REASON}
.endif # ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
.elif ${want_perl_sign} == ""
.if ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
USE_PERL5_REASON?= requires Perl ${want_perl_ver} exactly
IGNORE= ${USE_PERL5_REASON}
.endif # ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
.elif ${want_perl_sign} == "-"
.if ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
USE_PERL5_REASON?= requires a Perl version earlier than ${want_perl_ver}
IGNORE= ${USE_PERL5_REASON}
.endif # ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
.else # wrong suffix
IGNORE= improper use of USE_PERL5
.endif
.endif
_USES_POST+= perl5
.endif
.if defined(_POSTMKINCLUDED) && !defined(_INCLUDE_USES_PERL5_POST_MK)
_INCLUDE_USES_PERL5_POST_MK= yes
PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \
PERL_VER=${PERL_VER} \
PERL_ARCH=${PERL_ARCH} \
PERL5_MAN3=lib/perl5/${PERL_VER}/man/man3 \
SITE_PERL=${SITE_PERL_REL}
# handle perl5 specific manpages
.for sect in 3
.if defined(P5MAN${sect})
_MANPAGES+= ${P5MAN${sect}:S%^%${PREFIX}/lib/perl5/${PERL_VER}/man/man${sect}/%}
.endif
.endfor
MANDIRS+= ${PREFIX}/lib/perl5/${PERL_VER}
.if ${_USE_PERL5:Mmodbuild} || ${_USE_PERL5:Mmodbuildtiny}
_USE_PERL5+= configure
ALL_TARGET?= # empty
CONFIGURE_ARGS+=--install_path lib="${PREFIX}/${SITE_PERL_REL}" \
--install_path arch="${PREFIX}/${SITE_PERL_REL}/${PERL_ARCH}" \
--install_path script="${PREFIX}/bin" \
--install_path bin="${PREFIX}/bin" \
--install_path libdoc="${MAN3PREFIX}/man/man3" \
--install_path bindoc="${MAN1PREFIX}/man/man1"
CONFIGURE_SCRIPT?= Build.PL
PL_BUILD?= Build
.if !defined(NO_STAGE)
CONFIGURE_ARGS+=--destdir ${STAGEDIR}
DESTDIRNAME= --destdir
.endif
.if ${_USE_PERL5:Mmodbuild}
.if ${PORTNAME} != Module-Build
BUILD_DEPENDS+= ${SITE_PERL}/Module/Build.pm:${PORTSDIR}/devel/p5-Module-Build
.endif
CONFIGURE_ARGS+=--create_packlist 0
.endif
.if ${_USE_PERL5:Mmodbuildtiny}
.if ${PORTNAME} != Module-Build-Tiny
BUILD_DEPENDS+= ${SITE_PERL}/Module/Build/Tiny.pm:${PORTSDIR}/devel/p5-Module-Build-Tiny
.endif
CONFIGURE_ARGS+=--create_packlist 1
.endif
.elif ${_USE_PERL5:Mconfigure}
CONFIGURE_ARGS+=INSTALLDIRS="site"
.endif # modbuild
.if ${_USE_PERL5:Mconfigure}
_USE_PERL5+= build run
# Disable AutoInstall from attempting to install from CPAN directly in
# the case of missing dependencies. This causes the build to loop on
# the build cluster asking for interactive input.
CONFIGURE_ENV+= PERL_EXTUTILS_AUTOINSTALL="--skipdeps"
.if defined(BATCH) && !defined(IS_INTERACTIVE)
CONFIGURE_ENV+= PERL_MM_USE_DEFAULT="YES"
.endif # defined(BATCH) && !defined(IS_INTERACTIVE)
.endif # configure
.if ${_USE_PERL5:Mextract}
EXTRACT_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
.endif
.if ${_USE_PERL5:Mpatch}
PATCH_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
.endif
.if ${_USE_PERL5:Mbuild}
BUILD_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
.endif
.if ${_USE_PERL5:Mrun}
RUN_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
.endif
.if ${_USE_PERL5:Mconfigure}
CONFIGURE_ARGS+= CC="${CC}" CCFLAGS="${CFLAGS}" PREFIX="${PREFIX}" \
INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib"
CONFIGURE_SCRIPT?= Makefile.PL
MAN3PREFIX?= ${PREFIX}/lib/perl5/${PERL_VER}
.undef HAS_CONFIGURE
.if !target(do-configure)
do-configure:
@if [ -f ${SCRIPTDIR}/configure ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/configure; \
fi
@cd ${CONFIGURE_WRKSRC} && \
${SETENV} ${CONFIGURE_ENV} \
${PERL5} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
.if !${_USE_PERL5:Mmodbuild*}
@cd ${CONFIGURE_WRKSRC} && \
${PERL5} -pi -e 's/ doc_(perl|site|\$$\(INSTALLDIRS\))_install$$//' Makefile
.endif # ! modbuild
.endif # !target(do-configure)
.endif # configure
.if ${_USE_PERL5:Mmodbuild*}
.if !target(do-build)
do-build:
@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${ALL_TARGET} ${MAKE_ARGS})
.endif # !target(do-build)
.if !${USES:Mgmake}
.if !target(do-install)
do-install:
@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${INSTALL_TARGET} ${MAKE_ARGS})
.endif # !target(do-install)
.endif # ! USES=gmake
.endif # modbuild
post-stage::
# TODO: change to ${_USE_PERL5:Mconfigure} when M::B creates .packlist
.if ${USE_PERL5:Mconfigure} || ${USE_PERL5:Mmodbuildtiny}
-@[ -d ${STAGEDIR}${SITE_PERL}/${PERL_ARCH}/auto ] && ${FIND} ${STAGEDIR}${SITE_PERL}/${PERL_ARCH}/auto -name .packlist -exec ${SED} -i '' 's|^${STAGEDIR}||' '{}' \;
.endif
.endif # defined(_POSTMKINCLUDED)
Reference in New Issue View Git Blame Copy Permalink