1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-11-23 00:43:28 +00:00
freebsd-ports/Mk/bsd.gcc.mk
Tijl Coosemans 564a799c71 Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes". In most cases
USE_GCC=yes has been omitted though.

Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.

Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...

Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)
2014-02-16 17:15:31 +00:00

215 lines
6.3 KiB
Makefile

#-*- tab-width: 4; -*-
# ex:ts=4
#
# bsd.gcc.mk - Support for smarter USE_GCC usage.
#
# Created by: Edwin Groothuis <edwin@freebsd.org>
#
# To request the use of a current version of GCC, specify USE_GCC=yes in
# your port/system configuration. This is the preferred use of USE_GCC.
# It defines a canonical, default version of GCC.
#
# USE_GCC=any is similar, except that it also accepts the old GCC 4.2-
# based system compiler in older versions of FreeBSD.
#
# If your port needs a specific (minimum) version of GCC, you can easily
# specify that with a USE_GCC= statement. Unless absolutely necessary
# do so by specifying USE_GCC=X.Y+ which requests at least GCC version
# X.Y. To request a specific version omit the trailing + sign.
#
# Examples:
# USE_GCC= yes # port requires a current version of GCC
# # (4.6 as of today, subject to change).
# USE_GCC= any # port requires GCC 4.2 or later.
# USE_GCC= 4.8+ # port requires GCC 4.8 or later.
# USE_GCC= 4.8 # port requires GCC 4.8.
#
# If you are wondering what your port exactly does, use "make test-gcc"
# to see some debugging.
#
# $FreeBSD$
#
GCC_Include_MAINTAINER= gerald@FreeBSD.org
# All GCC versions supported by the ports framework. Keep them in
# ascending order and in sync with the table below.
GCCVERSIONS= 040200 040600 040700 040800 040900
# The first field if the OSVERSION in which it appeared in the base.
# The second field is the OSVERSION in which it disappeared from the base.
# The third field is the version as USE_GCC would use.
GCCVERSION_040200= 700042 9999999 4.2
GCCVERSION_040600= 0 0 4.6
GCCVERSION_040700= 0 0 4.7
GCCVERSION_040800= 0 0 4.8
GCCVERSION_040900= 0 0 4.9
GCC_DEFAULT_VERSION= 4.6
GCC_DEFAULT_V= ${GCC_DEFAULT_VERSION:S/.//}
# No configurable parts below this. ####################################
#
.if defined(USE_GCC) && ${USE_GCC} == yes
USE_GCC= ${GCC_DEFAULT_VERSION}+
.endif
# Extract the fields from GCCVERSION_...
.for v in ${GCCVERSIONS}
. for j in ${GCCVERSION_${v}}
. if !defined(_GCCVERSION_${v}_L)
_GCCVERSION_${v}_L= ${j}
. elif !defined(_GCCVERSION_${v}_R)
_GCCVERSION_${v}_R= ${j}
. elif !defined(_GCCVERSION_${v}_V)
_GCCVERSION_${v}_V= ${j}
. endif
. endfor
.endfor
.if defined(USE_GCC) && !defined(FORCE_BASE_CC_FOR_TESTING)
. if ${USE_GCC} == any
# Enable the clang-is-cc workaround. Default to the last GCC imported
# into base.
_USE_GCC:= 4.2
_GCC_ORLATER:= true
. else # ${USE_GCC} == any
# See if we can use a later version or exclusively the one specified.
_USE_GCC:= ${USE_GCC:S/+//}
.if ${USE_GCC} != ${_USE_GCC}
_GCC_ORLATER:= true
.endif
. endif # ${USE_GCC} == any
# Initialize _GCC_FOUND${v}. In parallel, check if USE_GCC points to a
# valid version to begin with.
.for v in ${GCCVERSIONS}
. if exists(${LOCALBASE}/bin/gcc${_GCCVERSION_${v}_V:S/.//})
_GCC_FOUND${v}= port
. elif ${OSVERSION} >= ${_GCCVERSION_${v}_L} && ${OSVERSION} < ${_GCCVERSION_${v}_R}
. if exists(/usr/bin/gcc)
_GCC_FOUND${v}= base
. endif
. endif
. if ${_USE_GCC}==${_GCCVERSION_${v}_V}
_GCCVERSION_OKAY= true
. endif
.endfor
.if !defined(_GCCVERSION_OKAY)
IGNORE= Unknown version of GCC specified (USE_GCC=${USE_GCC})
.endif
# If the GCC package defined in USE_GCC does not exist, but a later
# version is allowed (for example 4.7+), see if there is a later.
# First check if the base installed version is good enough, otherwise
# get the first available version.
#
.if defined(_GCC_ORLATER)
. for v in ${GCCVERSIONS}
. if ${_USE_GCC} == ${_GCCVERSION_${v}_V}
_GCC_MIN1:= true
. endif
. if defined(_GCC_MIN1) && defined(_GCC_FOUND${v}) && ${_GCC_FOUND${v}}=="base" && !defined(_GCC_FOUND)
_GCC_FOUND:= ${_GCCVERSION_${v}_V}
. endif
. endfor
. for v in ${GCCVERSIONS}
. if ${_USE_GCC} == ${_GCCVERSION_${v}_V}
_GCC_MIN2:= true
. endif
. if defined(_GCC_MIN2) && defined(_GCC_FOUND${v}) && !defined(_GCC_FOUND)
_GCC_FOUND:= ${_GCCVERSION_${v}_V}
. endif
. endfor
. if defined(_GCC_FOUND)
_USE_GCC:= ${_GCC_FOUND}
. elif ${_USE_GCC} < ${GCC_DEFAULT_VERSION}
_USE_GCC:= ${GCC_DEFAULT_VERSION}
. endif
.endif # defined(_GCC_ORLATER)
.endif # defined(USE_GCC)
.if defined(_USE_GCC)
# A concrete version has been selected. Determine if the installed OS
# features this version in the base, and if not then set proper ports
# dependencies, CC, CXX, CPP, and flags.
.for v in ${GCCVERSIONS}
. if ${_USE_GCC} == ${_GCCVERSION_${v}_V}
. if ${OSVERSION} < ${_GCCVERSION_${v}_L} || ${OSVERSION} > ${_GCCVERSION_${v}_R} || !exists(/usr/bin/gcc)
V:= ${_GCCVERSION_${v}_V:S/.//}
_GCC_PORT_DEPENDS:= gcc${V}
. if ${_USE_GCC} == ${GCC_DEFAULT_VERSION}
_GCC_PORT:= gcc
. else
_GCC_PORT:= gcc${V}
. endif
CC:= gcc${V}
CXX:= g++${V}
CPP:= cpp${V}
_GCC_RUNTIME:= ${LOCALBASE}/lib/gcc${V}
CFLAGS+= -Wl,-rpath=${_GCC_RUNTIME}
CXXFLAGS+= -Wl,-rpath=${_GCC_RUNTIME}
LDFLAGS+= -Wl,-rpath=${_GCC_RUNTIME} -L${_GCC_RUNTIME}
# The following is for the sakes of some ports which use this without
# ever telling us; to be fixed.
_GCC_BUILD_DEPENDS:= ${_GCC_PORT_DEPENDS}
. else # Use GCC in base.
CC:= gcc
CXX:= g++
. if exists(/usr/bin/gcpp)
CPP:= gcpp
. else
CPP:= cpp
. endif
. endif # Use GCC in base.
. endif # ${_USE_GCC} == ${_GCCVERSION_${v}_V}
.endfor
.undef V
.if defined(_GCC_PORT_DEPENDS)
BUILD_DEPENDS+= ${_GCC_PORT_DEPENDS}:${PORTSDIR}/lang/${_GCC_PORT}
RUN_DEPENDS+= ${_GCC_PORT_DEPENDS}:${PORTSDIR}/lang/${_GCC_PORT}
# Later GCC ports already depend on binutils; make sure whatever we
# build leverages this as well.
USE_BINUTILS= yes
.endif
.endif # defined(_USE_GCC) && !defined(FORCE_BASE_CC_FOR_TESTING)
test-gcc:
@echo USE_GCC=${USE_GCC}
.if defined(IGNORE)
@echo "IGNORE: ${IGNORE}"
.else
.if defined(USE_GCC)
.if defined(_GCC_ORLATER)
@echo Port can use later versions.
.else
@echo Port cannot use later versions.
.endif
.for v in ${GCCVERSIONS}
@echo -n "GCC version: ${_GCCVERSION_${v}_V} "
.if defined(_GCC_FOUND${v})
@echo -n "(${_GCC_FOUND${v}}) "
.endif
@echo "- OSVERSION from ${_GCCVERSION_${v}_L} to ${_GCCVERSION_${v}_R}"
# @echo ${v} - ${_GCC_FOUND${v}} - ${_GCCVERSION_${v}_L} to ${_GCCVERSION_${v}_R} - ${_GCCVERSION_${v}_V}
.endfor
@echo Using GCC version ${_USE_GCC}
.endif
@echo CC=${CC} - CXX=${CXX} - CPP=${CPP} - CFLAGS=\"${CFLAGS}\"
@echo LDFLAGS=\"${LDFLAGS}\"
@echo "BUILD_DEPENDS=${BUILD_DEPENDS}"
@echo "RUN_DEPENDS=${RUN_DEPENDS}"
.endif