1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-11-29 08:08:37 +00:00
freebsd/sys/xen/xen-os.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

174 lines
4.1 KiB
C
Raw Normal View History

Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
/******************************************************************************
* xen/xen-os.h
*
* Random collection of macros and definition
*
* Copyright (c) 2003, 2004 Keir Fraser (on behalf of the Xen team)
* All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to
* deal in the Software without restriction, including without limitation the
* rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#ifndef _XEN_XEN_OS_H_
#define _XEN_XEN_OS_H_
#define __XEN_INTERFACE_VERSION__ 0x00040d00
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
#define GRANT_REF_INVALID 0xffffffff
#ifdef LOCORE
#define __ASSEMBLY__
#endif
#include <contrib/xen/xen.h>
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
#ifndef __ASSEMBLY__
#include <xen/hvm.h>
#include <contrib/xen/event_channel.h>
/*
* Setup function which needs to be called on each processor by architecture
*/
extern void xen_setup_vcpu_info(void);
static inline vm_paddr_t
xen_get_xenstore_mfn(void)
{
return (hvm_get_parameter(HVM_PARAM_STORE_PFN));
}
static inline evtchn_port_t
xen_get_xenstore_evtchn(void)
{
return (hvm_get_parameter(HVM_PARAM_STORE_EVTCHN));
}
static inline vm_paddr_t
xen_get_console_mfn(void)
{
return (hvm_get_parameter(HVM_PARAM_CONSOLE_PFN));
}
static inline evtchn_port_t
xen_get_console_evtchn(void)
{
return (hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN));
}
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
extern shared_info_t *HYPERVISOR_shared_info;
extern bool xen_suspend_cancelled;
static inline bool
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
xen_domain(void)
{
return (vm_guest == VM_GUEST_XEN);
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
}
static inline bool
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
xen_pv_domain(void)
{
return (false);
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
}
static inline bool
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
xen_hvm_domain(void)
{
return (vm_guest == VM_GUEST_XEN);
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
}
static inline bool
xen_initial_domain(void)
{
return (xen_domain() && (hvm_start_flags & SIF_INITDOMAIN) != 0);
}
#endif
#include <machine/xen/xen-os.h>
/* Everything below this point is not included by assembler (.S) files. */
#ifndef __ASSEMBLY__
xen: Code cleanup and small bug fixes xen/hypervisor.h: - Remove unused helpers: MULTI_update_va_mapping, is_initial_xendomain, is_running_on_xen - Remove unused define CONFIG_X86_PAE - Remove unused variable xen_start_info: note that it's used inpcifront which is not built at all - Remove forward declaration of HYPERVISOR_crash xen/xen-os.h: - Remove unused define CONFIG_X86_PAE - Drop unused helpers: test_and_clear_bit, clear_bit, force_evtchn_callback - Implement a generic version (based on ofed/include/linux/bitops.h) of set_bit and test_bit and prefix them by xen_ to avoid any use by other code than Xen. Note that It would be worth to investigate a generic implementation in FreeBSD. - Replace barrier() by __compiler_membar() - Replace cpu_relax() by cpu_spinwait(): it's exactly the same as rep;nop = pause xen/xen_intr.h: - Move the prototype of xen_intr_handle_upcall in it: Use by all the platform x86/xen/xen_intr.c: - Use BITSET* for the enabledbits: Avoid to use custom helpers - test_bit/set_bit has been renamed to xen_test_bit/xen_set_bit - Don't export the variable xen_intr_pcpu dev/xen/blkback/blkback.c: - Fix the string format when XBB_DEBUG is enabled: host_addr is typed uint64_t dev/xen/balloon/balloon.c: - Remove set but not used variable - Use the correct type for frame_list: xen_pfn_t represents the frame number on any architecture dev/xen/control/control.c: - Return BUS_PROBE_WILDCARD in xs_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. dev/xen/grant-table/grant_table.c: - Remove unused cmpxchg - Drop unused include opt_pmap.h: Doesn't exist on ARM64 and it doesn't contain anything required for the code on x86 dev/xen/netfront/netfront.c: - Use the correct type for rx_pfn_array: xen_pfn_t represents the frame number on any architecture dev/xen/netback/netback.c: - Use the correct type for gmfn: xen_pfn_t represents the frame number on any architecture dev/xen/xenstore/xenstore.c: - Return BUS_PROBE_WILDCARD in xctrl_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. Note that with the changes, x86/include/xen/xen-os.h doesn't contain anymore arch-specific code. Although, a new series will add some helpers that differ between x86 and ARM64, so I've kept the headers for now. Submitted by: Julien Grall <julien.grall@citrix.com> Reviewed by: royger Differential Revision: https://reviews.freebsd.org/D3921 Sponsored by: Citrix Systems R&D
2015-10-21 10:44:07 +00:00
/*
* Based on ofed/include/linux/bitops.h
*
* Those helpers are prefixed by xen_ because xen-os.h is widely included
* and we don't want the other drivers using them.
*
*/
#define NBPL (NBBY * sizeof(long))
static inline bool
xen_test_bit(int bit, volatile xen_ulong_t *addr)
xen: Code cleanup and small bug fixes xen/hypervisor.h: - Remove unused helpers: MULTI_update_va_mapping, is_initial_xendomain, is_running_on_xen - Remove unused define CONFIG_X86_PAE - Remove unused variable xen_start_info: note that it's used inpcifront which is not built at all - Remove forward declaration of HYPERVISOR_crash xen/xen-os.h: - Remove unused define CONFIG_X86_PAE - Drop unused helpers: test_and_clear_bit, clear_bit, force_evtchn_callback - Implement a generic version (based on ofed/include/linux/bitops.h) of set_bit and test_bit and prefix them by xen_ to avoid any use by other code than Xen. Note that It would be worth to investigate a generic implementation in FreeBSD. - Replace barrier() by __compiler_membar() - Replace cpu_relax() by cpu_spinwait(): it's exactly the same as rep;nop = pause xen/xen_intr.h: - Move the prototype of xen_intr_handle_upcall in it: Use by all the platform x86/xen/xen_intr.c: - Use BITSET* for the enabledbits: Avoid to use custom helpers - test_bit/set_bit has been renamed to xen_test_bit/xen_set_bit - Don't export the variable xen_intr_pcpu dev/xen/blkback/blkback.c: - Fix the string format when XBB_DEBUG is enabled: host_addr is typed uint64_t dev/xen/balloon/balloon.c: - Remove set but not used variable - Use the correct type for frame_list: xen_pfn_t represents the frame number on any architecture dev/xen/control/control.c: - Return BUS_PROBE_WILDCARD in xs_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. dev/xen/grant-table/grant_table.c: - Remove unused cmpxchg - Drop unused include opt_pmap.h: Doesn't exist on ARM64 and it doesn't contain anything required for the code on x86 dev/xen/netfront/netfront.c: - Use the correct type for rx_pfn_array: xen_pfn_t represents the frame number on any architecture dev/xen/netback/netback.c: - Use the correct type for gmfn: xen_pfn_t represents the frame number on any architecture dev/xen/xenstore/xenstore.c: - Return BUS_PROBE_WILDCARD in xctrl_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. Note that with the changes, x86/include/xen/xen-os.h doesn't contain anymore arch-specific code. Although, a new series will add some helpers that differ between x86 and ARM64, so I've kept the headers for now. Submitted by: Julien Grall <julien.grall@citrix.com> Reviewed by: royger Differential Revision: https://reviews.freebsd.org/D3921 Sponsored by: Citrix Systems R&D
2015-10-21 10:44:07 +00:00
{
unsigned long mask = 1UL << (bit % NBPL);
return !!(atomic_load_acq_xen_ulong(&addr[bit / NBPL]) & mask);
xen: Code cleanup and small bug fixes xen/hypervisor.h: - Remove unused helpers: MULTI_update_va_mapping, is_initial_xendomain, is_running_on_xen - Remove unused define CONFIG_X86_PAE - Remove unused variable xen_start_info: note that it's used inpcifront which is not built at all - Remove forward declaration of HYPERVISOR_crash xen/xen-os.h: - Remove unused define CONFIG_X86_PAE - Drop unused helpers: test_and_clear_bit, clear_bit, force_evtchn_callback - Implement a generic version (based on ofed/include/linux/bitops.h) of set_bit and test_bit and prefix them by xen_ to avoid any use by other code than Xen. Note that It would be worth to investigate a generic implementation in FreeBSD. - Replace barrier() by __compiler_membar() - Replace cpu_relax() by cpu_spinwait(): it's exactly the same as rep;nop = pause xen/xen_intr.h: - Move the prototype of xen_intr_handle_upcall in it: Use by all the platform x86/xen/xen_intr.c: - Use BITSET* for the enabledbits: Avoid to use custom helpers - test_bit/set_bit has been renamed to xen_test_bit/xen_set_bit - Don't export the variable xen_intr_pcpu dev/xen/blkback/blkback.c: - Fix the string format when XBB_DEBUG is enabled: host_addr is typed uint64_t dev/xen/balloon/balloon.c: - Remove set but not used variable - Use the correct type for frame_list: xen_pfn_t represents the frame number on any architecture dev/xen/control/control.c: - Return BUS_PROBE_WILDCARD in xs_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. dev/xen/grant-table/grant_table.c: - Remove unused cmpxchg - Drop unused include opt_pmap.h: Doesn't exist on ARM64 and it doesn't contain anything required for the code on x86 dev/xen/netfront/netfront.c: - Use the correct type for rx_pfn_array: xen_pfn_t represents the frame number on any architecture dev/xen/netback/netback.c: - Use the correct type for gmfn: xen_pfn_t represents the frame number on any architecture dev/xen/xenstore/xenstore.c: - Return BUS_PROBE_WILDCARD in xctrl_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. Note that with the changes, x86/include/xen/xen-os.h doesn't contain anymore arch-specific code. Although, a new series will add some helpers that differ between x86 and ARM64, so I've kept the headers for now. Submitted by: Julien Grall <julien.grall@citrix.com> Reviewed by: royger Differential Revision: https://reviews.freebsd.org/D3921 Sponsored by: Citrix Systems R&D
2015-10-21 10:44:07 +00:00
}
static inline void
xen_set_bit(int bit, volatile xen_ulong_t *addr)
xen: Code cleanup and small bug fixes xen/hypervisor.h: - Remove unused helpers: MULTI_update_va_mapping, is_initial_xendomain, is_running_on_xen - Remove unused define CONFIG_X86_PAE - Remove unused variable xen_start_info: note that it's used inpcifront which is not built at all - Remove forward declaration of HYPERVISOR_crash xen/xen-os.h: - Remove unused define CONFIG_X86_PAE - Drop unused helpers: test_and_clear_bit, clear_bit, force_evtchn_callback - Implement a generic version (based on ofed/include/linux/bitops.h) of set_bit and test_bit and prefix them by xen_ to avoid any use by other code than Xen. Note that It would be worth to investigate a generic implementation in FreeBSD. - Replace barrier() by __compiler_membar() - Replace cpu_relax() by cpu_spinwait(): it's exactly the same as rep;nop = pause xen/xen_intr.h: - Move the prototype of xen_intr_handle_upcall in it: Use by all the platform x86/xen/xen_intr.c: - Use BITSET* for the enabledbits: Avoid to use custom helpers - test_bit/set_bit has been renamed to xen_test_bit/xen_set_bit - Don't export the variable xen_intr_pcpu dev/xen/blkback/blkback.c: - Fix the string format when XBB_DEBUG is enabled: host_addr is typed uint64_t dev/xen/balloon/balloon.c: - Remove set but not used variable - Use the correct type for frame_list: xen_pfn_t represents the frame number on any architecture dev/xen/control/control.c: - Return BUS_PROBE_WILDCARD in xs_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. dev/xen/grant-table/grant_table.c: - Remove unused cmpxchg - Drop unused include opt_pmap.h: Doesn't exist on ARM64 and it doesn't contain anything required for the code on x86 dev/xen/netfront/netfront.c: - Use the correct type for rx_pfn_array: xen_pfn_t represents the frame number on any architecture dev/xen/netback/netback.c: - Use the correct type for gmfn: xen_pfn_t represents the frame number on any architecture dev/xen/xenstore/xenstore.c: - Return BUS_PROBE_WILDCARD in xctrl_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. Note that with the changes, x86/include/xen/xen-os.h doesn't contain anymore arch-specific code. Although, a new series will add some helpers that differ between x86 and ARM64, so I've kept the headers for now. Submitted by: Julien Grall <julien.grall@citrix.com> Reviewed by: royger Differential Revision: https://reviews.freebsd.org/D3921 Sponsored by: Citrix Systems R&D
2015-10-21 10:44:07 +00:00
{
atomic_set_xen_ulong(&addr[bit / NBPL], 1UL << (bit % NBPL));
xen: Code cleanup and small bug fixes xen/hypervisor.h: - Remove unused helpers: MULTI_update_va_mapping, is_initial_xendomain, is_running_on_xen - Remove unused define CONFIG_X86_PAE - Remove unused variable xen_start_info: note that it's used inpcifront which is not built at all - Remove forward declaration of HYPERVISOR_crash xen/xen-os.h: - Remove unused define CONFIG_X86_PAE - Drop unused helpers: test_and_clear_bit, clear_bit, force_evtchn_callback - Implement a generic version (based on ofed/include/linux/bitops.h) of set_bit and test_bit and prefix them by xen_ to avoid any use by other code than Xen. Note that It would be worth to investigate a generic implementation in FreeBSD. - Replace barrier() by __compiler_membar() - Replace cpu_relax() by cpu_spinwait(): it's exactly the same as rep;nop = pause xen/xen_intr.h: - Move the prototype of xen_intr_handle_upcall in it: Use by all the platform x86/xen/xen_intr.c: - Use BITSET* for the enabledbits: Avoid to use custom helpers - test_bit/set_bit has been renamed to xen_test_bit/xen_set_bit - Don't export the variable xen_intr_pcpu dev/xen/blkback/blkback.c: - Fix the string format when XBB_DEBUG is enabled: host_addr is typed uint64_t dev/xen/balloon/balloon.c: - Remove set but not used variable - Use the correct type for frame_list: xen_pfn_t represents the frame number on any architecture dev/xen/control/control.c: - Return BUS_PROBE_WILDCARD in xs_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. dev/xen/grant-table/grant_table.c: - Remove unused cmpxchg - Drop unused include opt_pmap.h: Doesn't exist on ARM64 and it doesn't contain anything required for the code on x86 dev/xen/netfront/netfront.c: - Use the correct type for rx_pfn_array: xen_pfn_t represents the frame number on any architecture dev/xen/netback/netback.c: - Use the correct type for gmfn: xen_pfn_t represents the frame number on any architecture dev/xen/xenstore/xenstore.c: - Return BUS_PROBE_WILDCARD in xctrl_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. Note that with the changes, x86/include/xen/xen-os.h doesn't contain anymore arch-specific code. Although, a new series will add some helpers that differ between x86 and ARM64, so I've kept the headers for now. Submitted by: Julien Grall <julien.grall@citrix.com> Reviewed by: royger Differential Revision: https://reviews.freebsd.org/D3921 Sponsored by: Citrix Systems R&D
2015-10-21 10:44:07 +00:00
}
static inline void
xen_clear_bit(int bit, volatile xen_ulong_t *addr)
{
atomic_clear_xen_ulong(&addr[bit / NBPL], 1UL << (bit % NBPL));
}
#undef NBPL
xen: Code cleanup and small bug fixes xen/hypervisor.h: - Remove unused helpers: MULTI_update_va_mapping, is_initial_xendomain, is_running_on_xen - Remove unused define CONFIG_X86_PAE - Remove unused variable xen_start_info: note that it's used inpcifront which is not built at all - Remove forward declaration of HYPERVISOR_crash xen/xen-os.h: - Remove unused define CONFIG_X86_PAE - Drop unused helpers: test_and_clear_bit, clear_bit, force_evtchn_callback - Implement a generic version (based on ofed/include/linux/bitops.h) of set_bit and test_bit and prefix them by xen_ to avoid any use by other code than Xen. Note that It would be worth to investigate a generic implementation in FreeBSD. - Replace barrier() by __compiler_membar() - Replace cpu_relax() by cpu_spinwait(): it's exactly the same as rep;nop = pause xen/xen_intr.h: - Move the prototype of xen_intr_handle_upcall in it: Use by all the platform x86/xen/xen_intr.c: - Use BITSET* for the enabledbits: Avoid to use custom helpers - test_bit/set_bit has been renamed to xen_test_bit/xen_set_bit - Don't export the variable xen_intr_pcpu dev/xen/blkback/blkback.c: - Fix the string format when XBB_DEBUG is enabled: host_addr is typed uint64_t dev/xen/balloon/balloon.c: - Remove set but not used variable - Use the correct type for frame_list: xen_pfn_t represents the frame number on any architecture dev/xen/control/control.c: - Return BUS_PROBE_WILDCARD in xs_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. dev/xen/grant-table/grant_table.c: - Remove unused cmpxchg - Drop unused include opt_pmap.h: Doesn't exist on ARM64 and it doesn't contain anything required for the code on x86 dev/xen/netfront/netfront.c: - Use the correct type for rx_pfn_array: xen_pfn_t represents the frame number on any architecture dev/xen/netback/netback.c: - Use the correct type for gmfn: xen_pfn_t represents the frame number on any architecture dev/xen/xenstore/xenstore.c: - Return BUS_PROBE_WILDCARD in xctrl_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. Note that with the changes, x86/include/xen/xen-os.h doesn't contain anymore arch-specific code. Although, a new series will add some helpers that differ between x86 and ARM64, so I've kept the headers for now. Submitted by: Julien Grall <julien.grall@citrix.com> Reviewed by: royger Differential Revision: https://reviews.freebsd.org/D3921 Sponsored by: Citrix Systems R&D
2015-10-21 10:44:07 +00:00
/*
* Functions to allocate/free unused memory in order
* to map memory from other domains.
*/
struct resource *xenmem_alloc(device_t dev, int *res_id, size_t size);
int xenmem_free(device_t dev, int res_id, struct resource *res);
/* Debug/emergency function, prints directly to hypervisor console */
void xc_printf(const char *, ...) __printflike(1, 2);
/*
* Emergency print function, can be defined per-arch, otherwise defaults to
* HYPERVISOR_console_write. Should not be called directly, use xc_printf
* instead.
*/
void xen_emergency_print(const char *str, size_t size);
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
#ifndef xen_mb
#define xen_mb() mb()
#endif
#ifndef xen_rmb
#define xen_rmb() rmb()
#endif
#ifndef xen_wmb
#define xen_wmb() wmb()
#endif
#endif /* !__ASSEMBLY__ */
#endif /* _XEN_XEN_OS_H_ */