mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-11-30 08:19:09 +00:00
Code Issues Releases Activity
99ea23c583
freebsd/configure.ac

127 lines
3.2 KiB
Plaintext
Raw Normal View History

Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
/*
* This file is part of the ZFS Linux port.
*
* Copyright (c) 2009 Lawrence Livermore National Security, LLC.
* Produced at Lawrence Livermore National Laboratory
* Written by:
* Brian Behlendorf <behlendorf1@llnl.gov>,
* Herb Wartens <wartens2@llnl.gov>,
* Jim Garlick <garlick@llnl.gov>
* LLNL-CODE-403049
*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, Version 1.0 only
* (the "License"). You may not use this file except in compliance
* with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
AC_INIT
AC_LANG(C)
ZFS_AC_META
AC_CONFIG_AUX_DIR([config])
AC_CANONICAL_SYSTEM
AM_MAINTAINER_MODE
AM_SILENT_RULES
AM_INIT_AUTOMAKE([$ZFS_META_NAME], [$ZFS_META_VERSION])
AC_CONFIG_HEADERS([zfs_config.h], [
(mv zfs_config.h zfs_config.h.tmp &&
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
awk -f ${ac_srcdir}/config/config.awk zfs_config.h.tmp >zfs_config.h &&
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
rm zfs_config.h.tmp) || exit 1])
AC_PROG_INSTALL
AC_PROG_CC
AC_PROG_LIBTOOL
AM_PROG_AS
ZFS_AC_LICENSE
ZFS_AC_PACKAGE
ZFS_AC_CONFIG
ZFS_AC_DEBUG
AC_CONFIG_FILES([
Makefile
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
dracut/Makefile
dracut/90zfs/Makefile
Move udev rules from /etc/udev to /lib/udev This change moves the default install location for the zfs udev rules from /etc/udev/ to /lib/udev/. The correct convention is for rules provided by a package to be installed in /lib/udev/. The /etc/udev/ directory is reserved for custom rules or local overrides. Additionally, this patch cleans up some abuse of the bindir install location by adding a udevdir and udevruledir install directories. This allows us to revert to the default bin install location. The udev install directories can be set with the following new options. --with-udevdir=DIR install udev helpers [EPREFIX/lib/udev] --with-udevruledir=DIR install udev rules [UDEVDIR/rules.d] Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #356
2011-08-05 19:22:58 +00:00
udev/Makefile
udev/rules.d/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
etc/Makefile
Add init scripts To support automatically mounting your zfs on filesystem on boot a basic init script is needed. Unfortunately, every distribution has their own idea of the _right_ way to do things. Rather than write one very complicated portable init script, which would be invariably replaced by the distributions own anyway. I have instead added support to provide multiple distribution specific init scripts. The correct init script for your distribution will be selected by ZFS_AC_DEFAULT_PACKAGE which will set DEFAULT_INIT_SCRIPT. During 'make install' the correct script for your system will be installed from zfs/etc/init.d/zfs.DEFAULT_INIT_SCRIPT to the usual /etc/init.d/zfs location. Currently, there is zfs.fedora and a more generic zfs.lsb init script. Hopefully, the distribution maintainers who know best how they want their init scripts to function will feedback their approved versions to be included in the project. This change does not consider upstart jobs but I'm not at all opposed to add that sort of thing.
2011-03-17 22:02:28 +00:00
etc/init.d/Makefile
etc/zfs/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
man/Makefile
man/man8/Makefile
lib/Makefile
Add linux libspl support All changes needed for the libspl layer. This includes modifications to files directly copied from OpenSolaris and the addition of new files needed to fill in the gaps. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:50:56 +00:00
lib/libspl/Makefile
lib/libspl/asm-generic/Makefile
lib/libspl/asm-i386/Makefile
lib/libspl/asm-x86_64/Makefile
lib/libspl/include/Makefile
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
lib/libspl/include/ia32/Makefile
lib/libspl/include/ia32/sys/Makefile
lib/libspl/include/rpc/Makefile
lib/libspl/include/sys/Makefile
lib/libspl/include/sys/sysevent/Makefile
lib/libspl/include/sys/dktp/Makefile
lib/libspl/include/util/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
lib/libavl/Makefile
lib/libefi/Makefile
lib/libnvpair/Makefile
lib/libunicode/Makefile
lib/libuutil/Makefile
lib/libzpool/Makefile
lib/libzfs/Makefile
Implemented sharing datasets via NFS using libshare. The sharenfs and sharesmb properties depend on the libshare library to export datasets via NFS and SMB. This commit implements the base libshare functionality as well as support for managing NFS shares. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-07-02 19:34:05 +00:00
lib/libshare/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
cmd/Makefile
cmd/zdb/Makefile
cmd/zfs/Makefile
cmd/zinject/Makefile
cmd/zpool/Makefile
cmd/ztest/Makefile
Add linux zpios support Linux kernel implementation of PIOS test app. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:58:00 +00:00
cmd/zpios/Makefile
Fix mount helper Several issues related to strange mount/umount behavior were reported and this commit should address most of them. The original idea was to put in place a zfs mount helper (mount.zfs). This helper is used to enforce 'legacy' mount behavior, and perform any extra mount argument processing (selinux, zfsutil, etc). This helper wasn't ready for the 0.6.0-rc1 release but with this change it's functional but needs to extensively tested. This change addresses the following open issues. Closes #101 Closes #107 Closes #113 Closes #115 Closes #119
2011-03-04 23:14:46 +00:00
cmd/mount_zfs/Makefile
cmd/zpool_layout/Makefile
Use udev to create /dev/zvol/[dataset_name] links This commit allows zvols with names longer than 32 characters, which fixes issue on https://github.com/behlendorf/zfs/issues/#issue/102. Changes include: - use /dev/zd* device names for zvol, where * is the device minor (include/sys/fs/zfs.h, module/zfs/zvol.c). - add BLKZNAME ioctl to get dataset name from userland (include/sys/fs/zfs.h, module/zfs/zvol.c, cmd/zvol_id). - add udev rule to create /dev/zvol/[dataset_name] and the legacy /dev/[dataset_name] symlink. For partitions on zvol, it will create /dev/zvol/[dataset_name]-part* (etc/udev/rules.d/60-zvol.rules, cmd/zvol_id). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-02-22 10:58:44 +00:00
cmd/zvol_id/Makefile
Fix mount helper Several issues related to strange mount/umount behavior were reported and this commit should address most of them. The original idea was to put in place a zfs mount helper (mount.zfs). This helper is used to enforce 'legacy' mount behavior, and perform any extra mount argument processing (selinux, zfsutil, etc). This helper wasn't ready for the 0.6.0-rc1 release but with this change it's functional but needs to extensively tested. This change addresses the following open issues. Closes #101 Closes #107 Closes #113 Closes #115 Closes #119
2011-03-04 23:14:46 +00:00
cmd/zpool_id/Makefile
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
cmd/sas_switch_id/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
module/Makefile
module/avl/Makefile
module/nvpair/Makefile
module/unicode/Makefile
module/zcommon/Makefile
module/zfs/Makefile
Add linux zpios support Linux kernel implementation of PIOS test app. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:58:00 +00:00
module/zpios/Makefile
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
include/Makefile
Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
include/linux/Makefile
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
include/sys/Makefile
include/sys/fs/Makefile
include/sys/fm/Makefile
include/sys/fm/fs/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
scripts/Makefile
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
scripts/zpios-profile/Makefile
scripts/zpios-test/Makefile
scripts/zpool-config/Makefile
Add [-m map] option to zpool_layout By default the zpool_layout command would always use the slot number assigned by Linux when generating the zdev.conf file. This is a reasonable default there are cases when it makes sense to remap the slot id assigned by Linux using your own custom mapping. This commit adds support to zpool_layout to provide a custom slot mapping file. The file contains in the first column the Linux slot it and in the second column the custom slot mapping. By passing this map file with '-m map' to zpool_config the mapping will be applied when generating zdev.conf. Additionally, two sample mapping have been added which reflect different ways to map the slots in the dragon drawers.
2010-09-15 22:32:27 +00:00
scripts/zpool-layout/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
scripts/common.sh
zfs.spec
zfs-modules.spec
Add make rule for building Arch Linux packages Added the necessary build infrastructure for building packages compatible with the Arch Linux distribution. As such, one can now run: $ ./configure $ make pkg # Alternatively, one can run 'make arch' as well on the Arch Linux machine to create two binary packages compatible with the pacman package manager, one for the zfs userland utilities and another for the zfs kernel modules. The new packages can then be installed by running: # pacman -U $package.pkg.tar.xz In addition, source-only packages suitable for an Arch Linux chroot environment or remote builder can also be build using the 'sarch' make rule. NOTE: Since the source dist tarball is created on the fly from the head of the build tree, it's MD5 hash signature will be continually influx. As a result, the md5sum variable was intentionally omitted from the PKGBUILD files, and the '--skipinteg' makepkg option is used. This may or may not have any serious security implications, as the source tarball is not being downloaded from an outside source. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #491
2011-12-08 01:02:42 +00:00
PKGBUILD-zfs
PKGBUILD-zfs-modules
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
zfs-script-config.sh
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
])
AC_OUTPUT
Reference in New Issue Copy Permalink