From 0ed1d6fb00b8f22c82c3f9054c6dd16eb12469d2 Mon Sep 17 00:00:00 2001 From: Xin LI Date: Thu, 1 Aug 2019 06:35:33 +0000 Subject: [PATCH] Allow Kernel to link in both legacy libkern/zlib and new sys/contrib/zlib, with an eventual goal to convert all legacl zlib callers to the new zlib version: * Move generic zlib shims that are not specific to zlib 1.0.4 to sys/dev/zlib. * Connect new zlib (1.2.11) to the zlib kernel module, currently built with Z_SOLO. * Prefix the legacy zlib (1.0.4) with 'zlib104_' namespace. * Convert sys/opencrypto/cryptodeflate.c to use new zlib. * Remove bundled zlib 1.2.3 from ZFS and adapt it to new zlib and make it depend on the zlib module. * Fix Z_SOLO build of new zlib. PR: 229763 Submitted by: Yoshihiro Ota Reviewed by: markm (sys/dev/zlib/zlib_kmod.c) Relnotes: yes Differential Revision: https://reviews.freebsd.org/D19706 --- .../opensolaris/uts/common/fs/zfs/zfs_ioctl.c | 1 + .../opensolaris/uts/common/zmod/adler32.c | 149 -- .../opensolaris/uts/common/zmod/crc32.h | 443 ----- .../opensolaris/uts/common/zmod/deflate.c | 1742 ----------------- .../opensolaris/uts/common/zmod/deflate.h | 331 ---- .../opensolaris/uts/common/zmod/inffast.c | 320 --- .../opensolaris/uts/common/zmod/inffast.h | 13 - .../opensolaris/uts/common/zmod/inffixed.h | 96 - .../opensolaris/uts/common/zmod/inflate.c | 1395 ------------- .../opensolaris/uts/common/zmod/inflate.h | 117 -- .../opensolaris/uts/common/zmod/inftrees.c | 331 ---- .../opensolaris/uts/common/zmod/inftrees.h | 57 - .../uts/common/zmod/opensolaris_crc32.c | 428 ---- .../opensolaris/uts/common/zmod/trees.c | 1219 ------------ .../opensolaris/uts/common/zmod/zconf.h | 117 -- .../opensolaris/uts/common/zmod/zlib.h | 1359 ------------- .../opensolaris/uts/common/zmod/zmod.c | 46 +- .../opensolaris/uts/common/zmod/zmod_subr.c | 84 - .../opensolaris/uts/common/zmod/zutil.c | 324 --- .../opensolaris/uts/common/zmod/zutil.h | 274 --- sys/conf/NOTES | 2 + sys/conf/files | 44 +- sys/conf/kern.pre.mk | 4 + sys/conf/kmod.mk | 2 + sys/contrib/zlib/deflate.c | 7 +- sys/contrib/zlib/zconf.h | 3 + sys/contrib/zlib/zutil.h | 3 + sys/dev/zlib/zcalloc.c | 32 + sys/dev/zlib/zcalloc.h | 13 + sys/dev/zlib/zlib_mod.c | 53 + sys/libkern/zlib.c | 42 +- sys/modules/crypto/Makefile | 1 + sys/modules/zfs/Makefile | 10 +- sys/modules/zlib/Makefile | 20 + sys/opencrypto/cryptodeflate.c | 46 +- sys/opencrypto/deflate.h | 4 - sys/sys/zlib.h | 64 +- 37 files changed, 279 insertions(+), 8917 deletions(-) delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/adler32.c delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/crc32.h delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.c delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.h delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.c delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.h delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/inffixed.h delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.c delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.h delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.c delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.h delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/trees.c delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/zconf.h delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/zlib.h delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.c delete mode 100644 sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.h create mode 100644 sys/dev/zlib/zcalloc.c create mode 100644 sys/dev/zlib/zcalloc.h create mode 100644 sys/dev/zlib/zlib_mod.c diff --git a/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c b/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c index c9adb54380e0..7c9f1e62f4f1 100644 --- a/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c +++ b/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c @@ -7172,3 +7172,4 @@ MODULE_VERSION(zfsctrl, 1); MODULE_DEPEND(zfsctrl, opensolaris, 1, 1, 1); MODULE_DEPEND(zfsctrl, krpc, 1, 1, 1); MODULE_DEPEND(zfsctrl, acl_nfs4, 1, 1, 1); +MODULE_DEPEND(zfsctrl, zlib, 1, 1, 1); diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/adler32.c b/sys/cddl/contrib/opensolaris/uts/common/zmod/adler32.c deleted file mode 100644 index 59d84632ed5d..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/adler32.c +++ /dev/null @@ -1,149 +0,0 @@ -/* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -#define ZLIB_INTERNAL -#include "zlib.h" - -#define BASE 65521UL /* largest prime smaller than 65536 */ -#define NMAX 5552 -/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ - -#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} -#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); -#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); -#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); -#define DO16(buf) DO8(buf,0); DO8(buf,8); - -/* use NO_DIVIDE if your processor does not do division in hardware */ -#ifdef NO_DIVIDE -# define MOD(a) \ - do { \ - if (a >= (BASE << 16)) a -= (BASE << 16); \ - if (a >= (BASE << 15)) a -= (BASE << 15); \ - if (a >= (BASE << 14)) a -= (BASE << 14); \ - if (a >= (BASE << 13)) a -= (BASE << 13); \ - if (a >= (BASE << 12)) a -= (BASE << 12); \ - if (a >= (BASE << 11)) a -= (BASE << 11); \ - if (a >= (BASE << 10)) a -= (BASE << 10); \ - if (a >= (BASE << 9)) a -= (BASE << 9); \ - if (a >= (BASE << 8)) a -= (BASE << 8); \ - if (a >= (BASE << 7)) a -= (BASE << 7); \ - if (a >= (BASE << 6)) a -= (BASE << 6); \ - if (a >= (BASE << 5)) a -= (BASE << 5); \ - if (a >= (BASE << 4)) a -= (BASE << 4); \ - if (a >= (BASE << 3)) a -= (BASE << 3); \ - if (a >= (BASE << 2)) a -= (BASE << 2); \ - if (a >= (BASE << 1)) a -= (BASE << 1); \ - if (a >= BASE) a -= BASE; \ - } while (0) -# define MOD4(a) \ - do { \ - if (a >= (BASE << 4)) a -= (BASE << 4); \ - if (a >= (BASE << 3)) a -= (BASE << 3); \ - if (a >= (BASE << 2)) a -= (BASE << 2); \ - if (a >= (BASE << 1)) a -= (BASE << 1); \ - if (a >= BASE) a -= BASE; \ - } while (0) -#else -# define MOD(a) a %= BASE -# define MOD4(a) a %= BASE -#endif - -/* ========================================================================= */ -uLong ZEXPORT adler32(adler, buf, len) - uLong adler; - const Bytef *buf; - uInt len; -{ - unsigned long sum2; - unsigned n; - - /* split Adler-32 into component sums */ - sum2 = (adler >> 16) & 0xffff; - adler &= 0xffff; - - /* in case user likes doing a byte at a time, keep it fast */ - if (len == 1) { - adler += buf[0]; - if (adler >= BASE) - adler -= BASE; - sum2 += adler; - if (sum2 >= BASE) - sum2 -= BASE; - return adler | (sum2 << 16); - } - - /* initial Adler-32 value (deferred check for len == 1 speed) */ - if (buf == Z_NULL) - return 1L; - - /* in case short lengths are provided, keep it somewhat fast */ - if (len < 16) { - while (len--) { - adler += *buf++; - sum2 += adler; - } - if (adler >= BASE) - adler -= BASE; - MOD4(sum2); /* only added so many BASE's */ - return adler | (sum2 << 16); - } - - /* do length NMAX blocks -- requires just one modulo operation */ - while (len >= NMAX) { - len -= NMAX; - n = NMAX / 16; /* NMAX is divisible by 16 */ - do { - DO16(buf); /* 16 sums unrolled */ - buf += 16; - } while (--n); - MOD(adler); - MOD(sum2); - } - - /* do remaining bytes (less than NMAX, still just one modulo) */ - if (len) { /* avoid modulos if none remaining */ - while (len >= 16) { - len -= 16; - DO16(buf); - buf += 16; - } - while (len--) { - adler += *buf++; - sum2 += adler; - } - MOD(adler); - MOD(sum2); - } - - /* return recombined sums */ - return adler | (sum2 << 16); -} - -/* ========================================================================= */ -uLong ZEXPORT adler32_combine(adler1, adler2, len2) - uLong adler1; - uLong adler2; - z_off_t len2; -{ - unsigned long sum1; - unsigned long sum2; - unsigned rem; - - /* the derivation of this formula is left as an exercise for the reader */ - rem = (unsigned)(len2 % BASE); - sum1 = adler1 & 0xffff; - sum2 = rem * sum1; - MOD(sum2); - sum1 += (adler2 & 0xffff) + BASE - 1; - sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem; - if (sum1 > BASE) sum1 -= BASE; - if (sum1 > BASE) sum1 -= BASE; - if (sum2 > (BASE << 1)) sum2 -= (BASE << 1); - if (sum2 > BASE) sum2 -= BASE; - return sum1 | (sum2 << 16); -} diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/crc32.h b/sys/cddl/contrib/opensolaris/uts/common/zmod/crc32.h deleted file mode 100644 index 495c83e03179..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/crc32.h +++ /dev/null @@ -1,443 +0,0 @@ -/* crc32.h -- tables for rapid CRC calculation - * Generated automatically by crc32.c - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -local const unsigned long FAR crc_table[TBLS][256] = -{ - { - 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL, - 0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL, - 0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL, - 0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL, - 0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL, - 0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL, - 0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL, - 0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL, - 0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL, - 0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL, - 0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL, - 0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL, - 0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL, - 0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL, - 0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL, - 0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL, - 0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL, - 0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL, - 0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL, - 0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL, - 0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL, - 0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL, - 0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL, - 0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL, - 0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL, - 0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL, - 0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL, - 0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL, - 0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL, - 0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL, - 0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL, - 0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL, - 0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL, - 0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL, - 0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL, - 0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL, - 0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL, - 0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL, - 0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL, - 0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL, - 0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL, - 0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL, - 0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL, - 0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL, - 0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL, - 0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL, - 0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL, - 0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL, - 0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL, - 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL, - 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL, - 0x2d02ef8dUL -#ifdef BYFOUR - }, - { - 0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL, - 0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL, - 0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL, - 0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL, - 0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL, - 0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL, - 0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL, - 0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL, - 0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL, - 0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL, - 0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL, - 0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL, - 0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL, - 0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL, - 0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL, - 0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL, - 0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL, - 0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL, - 0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL, - 0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL, - 0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL, - 0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL, - 0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL, - 0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL, - 0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL, - 0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL, - 0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL, - 0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL, - 0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL, - 0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL, - 0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL, - 0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL, - 0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL, - 0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL, - 0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL, - 0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL, - 0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL, - 0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL, - 0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL, - 0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL, - 0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL, - 0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL, - 0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL, - 0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL, - 0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL, - 0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL, - 0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL, - 0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL, - 0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL, - 0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL, - 0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL, - 0x9324fd72UL - }, - { - 0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL, - 0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL, - 0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL, - 0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL, - 0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL, - 0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL, - 0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL, - 0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL, - 0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL, - 0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL, - 0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL, - 0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL, - 0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL, - 0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL, - 0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL, - 0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL, - 0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL, - 0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL, - 0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL, - 0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL, - 0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL, - 0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL, - 0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL, - 0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL, - 0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL, - 0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL, - 0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL, - 0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL, - 0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL, - 0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL, - 0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL, - 0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL, - 0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL, - 0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL, - 0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL, - 0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL, - 0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL, - 0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL, - 0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL, - 0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL, - 0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL, - 0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL, - 0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL, - 0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL, - 0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL, - 0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL, - 0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL, - 0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL, - 0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL, - 0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL, - 0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL, - 0xbe9834edUL - }, - { - 0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL, - 0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL, - 0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL, - 0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL, - 0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL, - 0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL, - 0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL, - 0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL, - 0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL, - 0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL, - 0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL, - 0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL, - 0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL, - 0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL, - 0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL, - 0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL, - 0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL, - 0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL, - 0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL, - 0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL, - 0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL, - 0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL, - 0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL, - 0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL, - 0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL, - 0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL, - 0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL, - 0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL, - 0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL, - 0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL, - 0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL, - 0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL, - 0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL, - 0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL, - 0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL, - 0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL, - 0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL, - 0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL, - 0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL, - 0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL, - 0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL, - 0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL, - 0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL, - 0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL, - 0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL, - 0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL, - 0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL, - 0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL, - 0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL, - 0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL, - 0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL, - 0xde0506f1UL - }, - { - 0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL, - 0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL, - 0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL, - 0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL, - 0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL, - 0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL, - 0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL, - 0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL, - 0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL, - 0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL, - 0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL, - 0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL, - 0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL, - 0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL, - 0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL, - 0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL, - 0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL, - 0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL, - 0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL, - 0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL, - 0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL, - 0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL, - 0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL, - 0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL, - 0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL, - 0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL, - 0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL, - 0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL, - 0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL, - 0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL, - 0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL, - 0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL, - 0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL, - 0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL, - 0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL, - 0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL, - 0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL, - 0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL, - 0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL, - 0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL, - 0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL, - 0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL, - 0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL, - 0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL, - 0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL, - 0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL, - 0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL, - 0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL, - 0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL, - 0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL, - 0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL, - 0x8def022dUL - }, - { - 0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL, - 0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL, - 0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL, - 0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL, - 0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL, - 0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL, - 0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL, - 0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL, - 0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL, - 0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL, - 0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL, - 0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL, - 0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL, - 0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL, - 0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL, - 0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL, - 0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL, - 0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL, - 0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL, - 0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL, - 0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL, - 0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL, - 0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL, - 0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL, - 0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL, - 0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL, - 0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL, - 0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL, - 0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL, - 0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL, - 0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL, - 0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL, - 0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL, - 0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL, - 0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL, - 0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL, - 0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL, - 0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL, - 0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL, - 0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL, - 0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL, - 0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL, - 0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL, - 0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL, - 0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL, - 0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL, - 0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL, - 0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL, - 0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL, - 0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL, - 0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL, - 0x72fd2493UL - }, - { - 0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL, - 0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL, - 0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL, - 0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL, - 0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL, - 0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL, - 0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL, - 0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL, - 0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL, - 0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL, - 0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL, - 0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL, - 0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL, - 0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL, - 0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL, - 0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL, - 0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL, - 0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL, - 0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL, - 0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL, - 0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL, - 0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL, - 0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL, - 0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL, - 0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL, - 0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL, - 0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL, - 0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL, - 0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL, - 0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL, - 0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL, - 0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL, - 0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL, - 0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL, - 0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL, - 0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL, - 0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL, - 0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL, - 0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL, - 0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL, - 0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL, - 0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL, - 0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL, - 0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL, - 0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL, - 0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL, - 0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL, - 0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL, - 0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL, - 0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL, - 0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL, - 0xed3498beUL - }, - { - 0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL, - 0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL, - 0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL, - 0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL, - 0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL, - 0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL, - 0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL, - 0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL, - 0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL, - 0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL, - 0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL, - 0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL, - 0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL, - 0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL, - 0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL, - 0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL, - 0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL, - 0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL, - 0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL, - 0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL, - 0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL, - 0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL, - 0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL, - 0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL, - 0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL, - 0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL, - 0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL, - 0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL, - 0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL, - 0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL, - 0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL, - 0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL, - 0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL, - 0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL, - 0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL, - 0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL, - 0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL, - 0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL, - 0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL, - 0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL, - 0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL, - 0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL, - 0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL, - 0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL, - 0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL, - 0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL, - 0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL, - 0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL, - 0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL, - 0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL, - 0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL, - 0xf10605deUL -#endif - } -}; diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.c b/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.c deleted file mode 100644 index 7847e40ba327..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.c +++ /dev/null @@ -1,1742 +0,0 @@ -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -/* deflate.c -- compress data using the deflation algorithm - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* - * ALGORITHM - * - * The "deflation" process depends on being able to identify portions - * of the input text which are identical to earlier input (within a - * sliding window trailing behind the input currently being processed). - * - * The most straightforward technique turns out to be the fastest for - * most input files: try all possible matches and select the longest. - * The key feature of this algorithm is that insertions into the string - * dictionary are very simple and thus fast, and deletions are avoided - * completely. Insertions are performed at each input character, whereas - * string matches are performed only when the previous match ends. So it - * is preferable to spend more time in matches to allow very fast string - * insertions and avoid deletions. The matching algorithm for small - * strings is inspired from that of Rabin & Karp. A brute force approach - * is used to find longer strings when a small match has been found. - * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze - * (by Leonid Broukhis). - * A previous version of this file used a more sophisticated algorithm - * (by Fiala and Greene) which is guaranteed to run in linear amortized - * time, but has a larger average cost, uses more memory and is patented. - * However the F&G algorithm may be faster for some highly redundant - * files if the parameter max_chain_length (described below) is too large. - * - * ACKNOWLEDGEMENTS - * - * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and - * I found it in 'freeze' written by Leonid Broukhis. - * Thanks to many people for bug reports and testing. - * - * REFERENCES - * - * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". - * Available in http://www.ietf.org/rfc/rfc1951.txt - * - * A description of the Rabin and Karp algorithm is given in the book - * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. - * - * Fiala,E.R., and Greene,D.H. - * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 - * - */ - -#include "deflate.h" - -static const char deflate_copyright[] = - " deflate 1.2.3 Copyright 1995-2005 Jean-loup Gailly "; -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ - -/* =========================================================================== - * Function prototypes. - */ -typedef enum { - need_more, /* block not completed, need more input or more output */ - block_done, /* block flush performed */ - finish_started, /* finish started, need only more output at next deflate */ - finish_done /* finish done, accept no more input or output */ -} block_state; - -typedef block_state (*compress_func) OF((deflate_state *s, int flush)); -/* Compression function. Returns the block state after the call. */ - -local void fill_window OF((deflate_state *s)); -local block_state deflate_stored OF((deflate_state *s, int flush)); -local block_state deflate_fast OF((deflate_state *s, int flush)); -#ifndef FASTEST -local block_state deflate_slow OF((deflate_state *s, int flush)); -#endif -local void lm_init OF((deflate_state *s)); -local void putShortMSB OF((deflate_state *s, uInt b)); -local void flush_pending OF((z_streamp strm)); -local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size)); -#ifndef FASTEST -#ifdef ASMV - void match_init OF((void)); /* asm code initialization */ - uInt longest_match OF((deflate_state *s, IPos cur_match)); -#else -local uInt longest_match OF((deflate_state *s, IPos cur_match)); -#endif -#endif -local uInt longest_match_fast OF((deflate_state *s, IPos cur_match)); - -#ifdef DEBUG -local void check_match OF((deflate_state *s, IPos start, IPos match, - int length)); -#endif - -/* =========================================================================== - * Local data - */ - -#define NIL 0 -/* Tail of hash chains */ - -#ifndef TOO_FAR -# define TOO_FAR 4096 -#endif -/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ - -#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) -/* Minimum amount of lookahead, except at the end of the input file. - * See deflate.c for comments about the MIN_MATCH+1. - */ - -/* Values for max_lazy_match, good_match and max_chain_length, depending on - * the desired pack level (0..9). The values given below have been tuned to - * exclude worst case performance for pathological files. Better values may be - * found for specific files. - */ -typedef struct config_s { - ush good_length; /* reduce lazy search above this match length */ - ush max_lazy; /* do not perform lazy search above this match length */ - ush nice_length; /* quit search above this match length */ - ush max_chain; - compress_func func; -} config; - -#ifdef FASTEST -local const config configuration_table[2] = { -/* good lazy nice chain */ -/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ -/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */ -#else -local const config configuration_table[10] = { -/* good lazy nice chain */ -/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ -/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */ -/* 2 */ {4, 5, 16, 8, deflate_fast}, -/* 3 */ {4, 6, 32, 32, deflate_fast}, - -/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ -/* 5 */ {8, 16, 32, 32, deflate_slow}, -/* 6 */ {8, 16, 128, 128, deflate_slow}, -/* 7 */ {8, 32, 128, 256, deflate_slow}, -/* 8 */ {32, 128, 258, 1024, deflate_slow}, -/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */ -#endif - -/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 - * For deflate_fast() (levels <= 3) good is ignored and lazy has a different - * meaning. - */ - -#define EQUAL 0 -/* result of memcmp for equal strings */ - -#ifndef NO_DUMMY_DECL -struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ -#endif - -/* =========================================================================== - * Update a hash value with the given input byte - * IN assertion: all calls to to UPDATE_HASH are made with consecutive - * input characters, so that a running hash key can be computed from the - * previous key instead of complete recalculation each time. - */ -#define UPDATE_HASH(s,h,c) (h = (((h)<hash_shift) ^ (c)) & s->hash_mask) - - -/* =========================================================================== - * Insert string str in the dictionary and set match_head to the previous head - * of the hash chain (the most recent string with same hash key). Return - * the previous length of the hash chain. - * If this file is compiled with -DFASTEST, the compression level is forced - * to 1, and no hash chains are maintained. - * IN assertion: all calls to to INSERT_STRING are made with consecutive - * input characters and the first MIN_MATCH bytes of str are valid - * (except for the last MIN_MATCH-1 bytes of the input file). - */ -#ifdef FASTEST -#define INSERT_STRING(s, str, match_head) \ - (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ - match_head = s->head[s->ins_h], \ - s->head[s->ins_h] = (Pos)(str)) -#else -#define INSERT_STRING(s, str, match_head) \ - (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ - match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \ - s->head[s->ins_h] = (Pos)(str)) -#endif - -/* =========================================================================== - * Initialize the hash table (avoiding 64K overflow for 16 bit systems). - * prev[] will be initialized on the fly. - */ -#define CLEAR_HASH(s) \ - s->head[s->hash_size-1] = NIL; \ - (void) zmemzero((Bytef *)s->head, \ - (unsigned)(s->hash_size-1)*sizeof(*s->head)); - -/* ========================================================================= */ -int ZEXPORT deflateInit_(strm, level, version, stream_size) - z_streamp strm; - int level; - const char *version; - int stream_size; -{ - return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, - Z_DEFAULT_STRATEGY, version, stream_size); - /* To do: ignore strm->next_in if we use it as window */ -} - -/* ========================================================================= */ -int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, - version, stream_size) - z_streamp strm; - int level; - int method; - int windowBits; - int memLevel; - int strategy; - const char *version; - int stream_size; -{ - deflate_state *s; - int wrap = 1; - static const char my_version[] = ZLIB_VERSION; - - ushf *overlay; - /* We overlay pending_buf and d_buf+l_buf. This works since the average - * output size for (length,distance) codes is <= 24 bits. - */ - - if (version == Z_NULL || version[0] != my_version[0] || - stream_size != sizeof(z_stream)) { - return Z_VERSION_ERROR; - } - if (strm == Z_NULL) return Z_STREAM_ERROR; - - strm->msg = Z_NULL; - if (strm->zalloc == (alloc_func)0) { - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; - } - if (strm->zfree == (free_func)0) strm->zfree = zcfree; - -#ifdef FASTEST - if (level != 0) level = 1; -#else - if (level == Z_DEFAULT_COMPRESSION) level = 6; -#endif - - if (windowBits < 0) { /* suppress zlib wrapper */ - wrap = 0; - windowBits = -windowBits; - } -#ifdef GZIP - else if (windowBits > 15) { - wrap = 2; /* write gzip wrapper instead */ - windowBits -= 16; - } -#endif - if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || - windowBits < 8 || windowBits > 15 || level < 0 || level > 9 || - strategy < 0 || strategy > Z_FIXED) { - return Z_STREAM_ERROR; - } - if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */ - s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); - if (s == Z_NULL) return Z_MEM_ERROR; - strm->state = (struct internal_state FAR *)s; - s->strm = strm; - - s->wrap = wrap; - s->gzhead = Z_NULL; - s->w_bits = windowBits; - s->w_size = 1 << s->w_bits; - s->w_mask = s->w_size - 1; - - s->hash_bits = memLevel + 7; - s->hash_size = 1 << s->hash_bits; - s->hash_mask = s->hash_size - 1; - s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); - - s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); - s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); - s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); - - s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ - - overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); - s->pending_buf = (uchf *) overlay; - s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); - - if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || - s->pending_buf == Z_NULL) { - s->status = FINISH_STATE; - strm->msg = (char*)ERR_MSG(Z_MEM_ERROR); - (void) deflateEnd (strm); - return Z_MEM_ERROR; - } - s->d_buf = overlay + s->lit_bufsize/sizeof(ush); - s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; - - s->level = level; - s->strategy = strategy; - s->method = (Byte)method; - - return deflateReset(strm); -} - -/* ========================================================================= */ -int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) - z_streamp strm; - const Bytef *dictionary; - uInt dictLength; -{ - deflate_state *s; - uInt length = dictLength; - uInt n; - IPos hash_head = 0; - - if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL || - strm->state->wrap == 2 || - (strm->state->wrap == 1 && strm->state->status != INIT_STATE)) - return Z_STREAM_ERROR; - - s = strm->state; - if (s->wrap) - strm->adler = adler32(strm->adler, dictionary, dictLength); - - if (length < MIN_MATCH) return Z_OK; - if (length > MAX_DIST(s)) { - length = MAX_DIST(s); - dictionary += dictLength - length; /* use the tail of the dictionary */ - } - (void) zmemcpy(s->window, dictionary, length); - s->strstart = length; - s->block_start = (long)length; - - /* Insert all strings in the hash table (except for the last two bytes). - * s->lookahead stays null, so s->ins_h will be recomputed at the next - * call of fill_window. - */ - s->ins_h = s->window[0]; - UPDATE_HASH(s, s->ins_h, s->window[1]); - for (n = 0; n <= length - MIN_MATCH; n++) { - INSERT_STRING(s, n, hash_head); - } - if (hash_head) hash_head = 0; /* to make compiler happy */ - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflateReset (strm) - z_streamp strm; -{ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL || - strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) { - return Z_STREAM_ERROR; - } - - strm->total_in = strm->total_out = 0; - strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ - strm->data_type = Z_UNKNOWN; - - s = (deflate_state *)strm->state; - s->pending = 0; - s->pending_out = s->pending_buf; - - if (s->wrap < 0) { - s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */ - } - s->status = s->wrap ? INIT_STATE : BUSY_STATE; - strm->adler = -#ifdef GZIP - s->wrap == 2 ? crc32(0L, Z_NULL, 0) : -#endif - adler32(0L, Z_NULL, 0); - s->last_flush = Z_NO_FLUSH; - - _tr_init(s); - lm_init(s); - - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflateSetHeader (strm, head) - z_streamp strm; - gz_headerp head; -{ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - if (strm->state->wrap != 2) return Z_STREAM_ERROR; - strm->state->gzhead = head; - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflatePrime (strm, bits, value) - z_streamp strm; - int bits; - int value; -{ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - strm->state->bi_valid = bits; - strm->state->bi_buf = (ush)(value & ((1 << bits) - 1)); - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflateParams(strm, level, strategy) - z_streamp strm; - int level; - int strategy; -{ - deflate_state *s; - compress_func func; - int err = Z_OK; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - s = strm->state; - -#ifdef FASTEST - if (level != 0) level = 1; -#else - if (level == Z_DEFAULT_COMPRESSION) level = 6; -#endif - if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) { - return Z_STREAM_ERROR; - } - func = configuration_table[s->level].func; - - if (func != configuration_table[level].func && strm->total_in != 0) { - /* Flush the last buffer: */ - err = deflate(strm, Z_PARTIAL_FLUSH); - } - if (s->level != level) { - s->level = level; - s->max_lazy_match = configuration_table[level].max_lazy; - s->good_match = configuration_table[level].good_length; - s->nice_match = configuration_table[level].nice_length; - s->max_chain_length = configuration_table[level].max_chain; - } - s->strategy = strategy; - return err; -} - -/* ========================================================================= */ -int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain) - z_streamp strm; - int good_length; - int max_lazy; - int nice_length; - int max_chain; -{ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - s = strm->state; - s->good_match = good_length; - s->max_lazy_match = max_lazy; - s->nice_match = nice_length; - s->max_chain_length = max_chain; - return Z_OK; -} - -/* ========================================================================= - * For the default windowBits of 15 and memLevel of 8, this function returns - * a close to exact, as well as small, upper bound on the compressed size. - * They are coded as constants here for a reason--if the #define's are - * changed, then this function needs to be changed as well. The return - * value for 15 and 8 only works for those exact settings. - * - * For any setting other than those defaults for windowBits and memLevel, - * the value returned is a conservative worst case for the maximum expansion - * resulting from using fixed blocks instead of stored blocks, which deflate - * can emit on compressed data for some combinations of the parameters. - * - * This function could be more sophisticated to provide closer upper bounds - * for every combination of windowBits and memLevel, as well as wrap. - * But even the conservative upper bound of about 14% expansion does not - * seem onerous for output buffer allocation. - */ -uLong ZEXPORT deflateBound(strm, sourceLen) - z_streamp strm; - uLong sourceLen; -{ - deflate_state *s; - uLong destLen; - - /* conservative upper bound */ - destLen = sourceLen + - ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 11; - - /* if can't get parameters, return conservative bound */ - if (strm == Z_NULL || strm->state == Z_NULL) - return destLen; - - /* if not default parameters, return conservative bound */ - s = strm->state; - if (s->w_bits != 15 || s->hash_bits != 8 + 7) - return destLen; - - /* default settings: return tight bound for that case */ - return compressBound(sourceLen); -} - -/* ========================================================================= - * Put a short in the pending buffer. The 16-bit value is put in MSB order. - * IN assertion: the stream state is correct and there is enough room in - * pending_buf. - */ -local void putShortMSB (s, b) - deflate_state *s; - uInt b; -{ - put_byte(s, (Byte)(b >> 8)); - put_byte(s, (Byte)(b & 0xff)); -} - -/* ========================================================================= - * Flush as much pending output as possible. All deflate() output goes - * through this function so some applications may wish to modify it - * to avoid allocating a large strm->next_out buffer and copying into it. - * (See also read_buf()). - */ -local void flush_pending(strm) - z_streamp strm; -{ - unsigned len = strm->state->pending; - - if (len > strm->avail_out) len = strm->avail_out; - if (len == 0) return; - - zmemcpy(strm->next_out, strm->state->pending_out, len); - strm->next_out += len; - strm->state->pending_out += len; - strm->total_out += len; - strm->avail_out -= len; - strm->state->pending -= len; - if (strm->state->pending == 0) { - strm->state->pending_out = strm->state->pending_buf; - } -} - -/* ========================================================================= */ -int ZEXPORT deflate (strm, flush) - z_streamp strm; - int flush; -{ - int old_flush; /* value of flush param for previous deflate call */ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL || - flush > Z_FINISH || flush < 0) { - return Z_STREAM_ERROR; - } - s = strm->state; - - if (strm->next_out == Z_NULL || - (strm->next_in == Z_NULL && strm->avail_in != 0) || - (s->status == FINISH_STATE && flush != Z_FINISH)) { - ERR_RETURN(strm, Z_STREAM_ERROR); - } - if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); - - s->strm = strm; /* just in case */ - old_flush = s->last_flush; - s->last_flush = flush; - - /* Write the header */ - if (s->status == INIT_STATE) { -#ifdef GZIP - if (s->wrap == 2) { - strm->adler = crc32(0L, Z_NULL, 0); - put_byte(s, 31); - put_byte(s, 139); - put_byte(s, 8); - if (s->gzhead == NULL) { - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, s->level == 9 ? 2 : - (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? - 4 : 0)); - put_byte(s, OS_CODE); - s->status = BUSY_STATE; - } - else { - put_byte(s, (s->gzhead->text ? 1 : 0) + - (s->gzhead->hcrc ? 2 : 0) + - (s->gzhead->extra == Z_NULL ? 0 : 4) + - (s->gzhead->name == Z_NULL ? 0 : 8) + - (s->gzhead->comment == Z_NULL ? 0 : 16) - ); - put_byte(s, (Byte)(s->gzhead->time & 0xff)); - put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff)); - put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff)); - put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff)); - put_byte(s, s->level == 9 ? 2 : - (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? - 4 : 0)); - put_byte(s, s->gzhead->os & 0xff); - if (s->gzhead->extra != NULL) { - put_byte(s, s->gzhead->extra_len & 0xff); - put_byte(s, (s->gzhead->extra_len >> 8) & 0xff); - } - if (s->gzhead->hcrc) - strm->adler = crc32(strm->adler, s->pending_buf, - s->pending); - s->gzindex = 0; - s->status = EXTRA_STATE; - } - } - else -#endif - { - uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; - uInt level_flags; - - if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2) - level_flags = 0; - else if (s->level < 6) - level_flags = 1; - else if (s->level == 6) - level_flags = 2; - else - level_flags = 3; - header |= (level_flags << 6); - if (s->strstart != 0) header |= PRESET_DICT; - header += 31 - (header % 31); - - s->status = BUSY_STATE; - putShortMSB(s, header); - - /* Save the adler32 of the preset dictionary: */ - if (s->strstart != 0) { - putShortMSB(s, (uInt)(strm->adler >> 16)); - putShortMSB(s, (uInt)(strm->adler & 0xffff)); - } - strm->adler = adler32(0L, Z_NULL, 0); - } - } -#ifdef GZIP - if (s->status == EXTRA_STATE) { - if (s->gzhead->extra != NULL) { - uInt beg = s->pending; /* start of bytes to update crc */ - - while (s->gzindex < (s->gzhead->extra_len & 0xffff)) { - if (s->pending == s->pending_buf_size) { - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - flush_pending(strm); - beg = s->pending; - if (s->pending == s->pending_buf_size) - break; - } - put_byte(s, s->gzhead->extra[s->gzindex]); - s->gzindex++; - } - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - if (s->gzindex == s->gzhead->extra_len) { - s->gzindex = 0; - s->status = NAME_STATE; - } - } - else - s->status = NAME_STATE; - } - if (s->status == NAME_STATE) { - if (s->gzhead->name != NULL) { - uInt beg = s->pending; /* start of bytes to update crc */ - int val; - - do { - if (s->pending == s->pending_buf_size) { - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - flush_pending(strm); - beg = s->pending; - if (s->pending == s->pending_buf_size) { - val = 1; - break; - } - } - val = s->gzhead->name[s->gzindex++]; - put_byte(s, val); - } while (val != 0); - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - if (val == 0) { - s->gzindex = 0; - s->status = COMMENT_STATE; - } - } - else - s->status = COMMENT_STATE; - } - if (s->status == COMMENT_STATE) { - if (s->gzhead->comment != NULL) { - uInt beg = s->pending; /* start of bytes to update crc */ - int val; - - do { - if (s->pending == s->pending_buf_size) { - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - flush_pending(strm); - beg = s->pending; - if (s->pending == s->pending_buf_size) { - val = 1; - break; - } - } - val = s->gzhead->comment[s->gzindex++]; - put_byte(s, val); - } while (val != 0); - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - if (val == 0) - s->status = HCRC_STATE; - } - else - s->status = HCRC_STATE; - } - if (s->status == HCRC_STATE) { - if (s->gzhead->hcrc) { - if (s->pending + 2 > s->pending_buf_size) - flush_pending(strm); - if (s->pending + 2 <= s->pending_buf_size) { - put_byte(s, (Byte)(strm->adler & 0xff)); - put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); - strm->adler = crc32(0L, Z_NULL, 0); - s->status = BUSY_STATE; - } - } - else - s->status = BUSY_STATE; - } -#endif - - /* Flush as much pending output as possible */ - if (s->pending != 0) { - flush_pending(strm); - if (strm->avail_out == 0) { - /* Since avail_out is 0, deflate will be called again with - * more output space, but possibly with both pending and - * avail_in equal to zero. There won't be anything to do, - * but this is not an error situation so make sure we - * return OK instead of BUF_ERROR at next call of deflate: - */ - s->last_flush = -1; - return Z_OK; - } - - /* Make sure there is something to do and avoid duplicate consecutive - * flushes. For repeated and useless calls with Z_FINISH, we keep - * returning Z_STREAM_END instead of Z_BUF_ERROR. - */ - } else if (strm->avail_in == 0 && flush <= old_flush && - flush != Z_FINISH) { - ERR_RETURN(strm, Z_BUF_ERROR); - } - - /* User must not provide more input after the first FINISH: */ - if (s->status == FINISH_STATE && strm->avail_in != 0) { - ERR_RETURN(strm, Z_BUF_ERROR); - } - - /* Start a new block or continue the current one. - */ - if (strm->avail_in != 0 || s->lookahead != 0 || - (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { - block_state bstate; - - bstate = (*(configuration_table[s->level].func))(s, flush); - - if (bstate == finish_started || bstate == finish_done) { - s->status = FINISH_STATE; - } - if (bstate == need_more || bstate == finish_started) { - if (strm->avail_out == 0) { - s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ - } - return Z_OK; - /* If flush != Z_NO_FLUSH && avail_out == 0, the next call - * of deflate should use the same flush parameter to make sure - * that the flush is complete. So we don't have to output an - * empty block here, this will be done at next call. This also - * ensures that for a very small output buffer, we emit at most - * one empty block. - */ - } - if (bstate == block_done) { - if (flush == Z_PARTIAL_FLUSH) { - _tr_align(s); - } else { /* FULL_FLUSH or SYNC_FLUSH */ - _tr_stored_block(s, (char*)0, 0L, 0); - /* For a full flush, this empty block will be recognized - * as a special marker by inflate_sync(). - */ - if (flush == Z_FULL_FLUSH) { - CLEAR_HASH(s); /* forget history */ - } - } - flush_pending(strm); - if (strm->avail_out == 0) { - s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ - return Z_OK; - } - } - } - Assert(strm->avail_out > 0, "bug2"); - - if (flush != Z_FINISH) return Z_OK; - if (s->wrap <= 0) return Z_STREAM_END; - - /* Write the trailer */ -#ifdef GZIP - if (s->wrap == 2) { - put_byte(s, (Byte)(strm->adler & 0xff)); - put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); - put_byte(s, (Byte)((strm->adler >> 16) & 0xff)); - put_byte(s, (Byte)((strm->adler >> 24) & 0xff)); - put_byte(s, (Byte)(strm->total_in & 0xff)); - put_byte(s, (Byte)((strm->total_in >> 8) & 0xff)); - put_byte(s, (Byte)((strm->total_in >> 16) & 0xff)); - put_byte(s, (Byte)((strm->total_in >> 24) & 0xff)); - } - else -#endif - { - putShortMSB(s, (uInt)(strm->adler >> 16)); - putShortMSB(s, (uInt)(strm->adler & 0xffff)); - } - flush_pending(strm); - /* If avail_out is zero, the application will call deflate again - * to flush the rest. - */ - if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */ - return s->pending != 0 ? Z_OK : Z_STREAM_END; -} - -/* ========================================================================= */ -int ZEXPORT deflateEnd (strm) - z_streamp strm; -{ - int status; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - - status = strm->state->status; - if (status != INIT_STATE && - status != EXTRA_STATE && - status != NAME_STATE && - status != COMMENT_STATE && - status != HCRC_STATE && - status != BUSY_STATE && - status != FINISH_STATE) { - return Z_STREAM_ERROR; - } - - /* Deallocate in reverse order of allocations: */ - TRY_FREE(strm, strm->state->pending_buf); - TRY_FREE(strm, strm->state->head); - TRY_FREE(strm, strm->state->prev); - TRY_FREE(strm, strm->state->window); - - ZFREE(strm, strm->state); - strm->state = Z_NULL; - - return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; -} - -/* ========================================================================= - * Copy the source state to the destination state. - * To simplify the source, this is not supported for 16-bit MSDOS (which - * doesn't have enough memory anyway to duplicate compression states). - */ -int ZEXPORT deflateCopy (dest, source) - z_streamp dest; - z_streamp source; -{ -#ifdef MAXSEG_64K - return Z_STREAM_ERROR; -#else - deflate_state *ds; - deflate_state *ss; - ushf *overlay; - - - if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) { - return Z_STREAM_ERROR; - } - - ss = source->state; - - zmemcpy(dest, source, sizeof(z_stream)); - - ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); - if (ds == Z_NULL) return Z_MEM_ERROR; - dest->state = (struct internal_state FAR *) ds; - zmemcpy(ds, ss, sizeof(deflate_state)); - ds->strm = dest; - - ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); - ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); - ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); - overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); - ds->pending_buf = (uchf *) overlay; - - if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || - ds->pending_buf == Z_NULL) { - deflateEnd (dest); - return Z_MEM_ERROR; - } - /* following zmemcpy do not work for 16-bit MSDOS */ - zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); - zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos)); - zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos)); - zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); - - ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); - ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); - ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; - - ds->l_desc.dyn_tree = ds->dyn_ltree; - ds->d_desc.dyn_tree = ds->dyn_dtree; - ds->bl_desc.dyn_tree = ds->bl_tree; - - return Z_OK; -#endif /* MAXSEG_64K */ -} - -/* =========================================================================== - * Read a new buffer from the current input stream, update the adler32 - * and total number of bytes read. All deflate() input goes through - * this function so some applications may wish to modify it to avoid - * allocating a large strm->next_in buffer and copying from it. - * (See also flush_pending()). - */ -local int read_buf(strm, buf, size) - z_streamp strm; - Bytef *buf; - unsigned size; -{ - unsigned len = strm->avail_in; - - if (len > size) len = size; - if (len == 0) return 0; - - strm->avail_in -= len; - - if (strm->state->wrap == 1) { - strm->adler = adler32(strm->adler, strm->next_in, len); - } -#ifdef GZIP - else if (strm->state->wrap == 2) { - strm->adler = crc32(strm->adler, strm->next_in, len); - } -#endif - zmemcpy(buf, strm->next_in, len); - strm->next_in += len; - strm->total_in += len; - - return (int)len; -} - -/* =========================================================================== - * Initialize the "longest match" routines for a new zlib stream - */ -local void lm_init (s) - deflate_state *s; -{ - s->window_size = (ulg)2L*s->w_size; - - CLEAR_HASH(s); - - /* Set the default configuration parameters: - */ - s->max_lazy_match = configuration_table[s->level].max_lazy; - s->good_match = configuration_table[s->level].good_length; - s->nice_match = configuration_table[s->level].nice_length; - s->max_chain_length = configuration_table[s->level].max_chain; - - s->strstart = 0; - s->block_start = 0L; - s->lookahead = 0; - s->match_length = s->prev_length = MIN_MATCH-1; - s->match_available = 0; - s->ins_h = 0; -#ifndef FASTEST -#ifdef ASMV - match_init(); /* initialize the asm code */ -#endif -#endif -} - -#ifndef FASTEST -/* =========================================================================== - * Set match_start to the longest match starting at the given string and - * return its length. Matches shorter or equal to prev_length are discarded, - * in which case the result is equal to prev_length and match_start is - * garbage. - * IN assertions: cur_match is the head of the hash chain for the current - * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 - * OUT assertion: the match length is not greater than s->lookahead. - */ -#ifndef ASMV -/* For 80x86 and 680x0, an optimized version will be provided in match.asm or - * match.S. The code will be functionally equivalent. - */ -local uInt longest_match(s, cur_match) - deflate_state *s; - IPos cur_match; /* current match */ -{ - unsigned chain_length = s->max_chain_length;/* max hash chain length */ - register Bytef *scan = s->window + s->strstart; /* current string */ - register Bytef *match; /* matched string */ - register int len; /* length of current match */ - int best_len = s->prev_length; /* best match length so far */ - int nice_match = s->nice_match; /* stop if match long enough */ - IPos limit = s->strstart > (IPos)MAX_DIST(s) ? - s->strstart - (IPos)MAX_DIST(s) : NIL; - /* Stop when cur_match becomes <= limit. To simplify the code, - * we prevent matches with the string of window index 0. - */ - Posf *prev = s->prev; - uInt wmask = s->w_mask; - -#ifdef UNALIGNED_OK - /* Compare two bytes at a time. Note: this is not always beneficial. - * Try with and without -DUNALIGNED_OK to check. - */ - register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; - register ush scan_start = *(ushf*)scan; - register ush scan_end = *(ushf*)(scan+best_len-1); -#else - register Bytef *strend = s->window + s->strstart + MAX_MATCH; - register Byte scan_end1 = scan[best_len-1]; - register Byte scan_end = scan[best_len]; -#endif - - /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. - * It is easy to get rid of this optimization if necessary. - */ - Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); - - /* Do not waste too much time if we already have a good match: */ - if (s->prev_length >= s->good_match) { - chain_length >>= 2; - } - /* Do not look for matches beyond the end of the input. This is necessary - * to make deflate deterministic. - */ - if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; - - Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); - - do { - Assert(cur_match < s->strstart, "no future"); - match = s->window + cur_match; - - /* Skip to next match if the match length cannot increase - * or if the match length is less than 2. Note that the checks below - * for insufficient lookahead only occur occasionally for performance - * reasons. Therefore uninitialized memory will be accessed, and - * conditional jumps will be made that depend on those values. - * However the length of the match is limited to the lookahead, so - * the output of deflate is not affected by the uninitialized values. - */ -#if (defined(UNALIGNED_OK) && MAX_MATCH == 258) - /* This code assumes sizeof(unsigned short) == 2. Do not use - * UNALIGNED_OK if your compiler uses a different size. - */ - if (*(ushf*)(match+best_len-1) != scan_end || - *(ushf*)match != scan_start) continue; - - /* It is not necessary to compare scan[2] and match[2] since they are - * always equal when the other bytes match, given that the hash keys - * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at - * strstart+3, +5, ... up to strstart+257. We check for insufficient - * lookahead only every 4th comparison; the 128th check will be made - * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is - * necessary to put more guard bytes at the end of the window, or - * to check more often for insufficient lookahead. - */ - Assert(scan[2] == match[2], "scan[2]?"); - scan++, match++; - do { - } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - scan < strend); - /* The funny "do {}" generates better code on most compilers */ - - /* Here, scan <= window+strstart+257 */ - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - if (*scan == *match) scan++; - - len = (MAX_MATCH - 1) - (int)(strend-scan); - scan = strend - (MAX_MATCH-1); - -#else /* UNALIGNED_OK */ - - if (match[best_len] != scan_end || - match[best_len-1] != scan_end1 || - *match != *scan || - *++match != scan[1]) continue; - - /* The check at best_len-1 can be removed because it will be made - * again later. (This heuristic is not always a win.) - * It is not necessary to compare scan[2] and match[2] since they - * are always equal when the other bytes match, given that - * the hash keys are equal and that HASH_BITS >= 8. - */ - scan += 2, match++; - Assert(*scan == *match, "match[2]?"); - - /* We check for insufficient lookahead only every 8th comparison; - * the 256th check will be made at strstart+258. - */ - do { - } while (*++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - scan < strend); - - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - - len = MAX_MATCH - (int)(strend - scan); - scan = strend - MAX_MATCH; - -#endif /* UNALIGNED_OK */ - - if (len > best_len) { - s->match_start = cur_match; - best_len = len; - if (len >= nice_match) break; -#ifdef UNALIGNED_OK - scan_end = *(ushf*)(scan+best_len-1); -#else - scan_end1 = scan[best_len-1]; - scan_end = scan[best_len]; -#endif - } - } while ((cur_match = prev[cur_match & wmask]) > limit - && --chain_length != 0); - - if ((uInt)best_len <= s->lookahead) return (uInt)best_len; - return s->lookahead; -} -#endif /* ASMV */ -#endif /* FASTEST */ - -/* --------------------------------------------------------------------------- - * Optimized version for level == 1 or strategy == Z_RLE only - */ -local uInt longest_match_fast(s, cur_match) - deflate_state *s; - IPos cur_match; /* current match */ -{ - register Bytef *scan = s->window + s->strstart; /* current string */ - register Bytef *match; /* matched string */ - register int len; /* length of current match */ - register Bytef *strend = s->window + s->strstart + MAX_MATCH; - - /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. - * It is easy to get rid of this optimization if necessary. - */ - Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); - - Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); - - Assert(cur_match < s->strstart, "no future"); - - match = s->window + cur_match; - - /* Return failure if the match length is less than 2: - */ - if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1; - - /* The check at best_len-1 can be removed because it will be made - * again later. (This heuristic is not always a win.) - * It is not necessary to compare scan[2] and match[2] since they - * are always equal when the other bytes match, given that - * the hash keys are equal and that HASH_BITS >= 8. - */ - scan += 2, match += 2; - Assert(*scan == *match, "match[2]?"); - - /* We check for insufficient lookahead only every 8th comparison; - * the 256th check will be made at strstart+258. - */ - do { - } while (*++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - scan < strend); - - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - - len = MAX_MATCH - (int)(strend - scan); - - if (len < MIN_MATCH) return MIN_MATCH - 1; - - s->match_start = cur_match; - return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead; -} - -#ifdef DEBUG -/* =========================================================================== - * Check that the match at match_start is indeed a match. - */ -local void check_match(s, start, match, length) - deflate_state *s; - IPos start, match; - int length; -{ - /* check that the match is indeed a match */ - if (zmemcmp(s->window + match, - s->window + start, length) != EQUAL) { - fprintf(stderr, " start %u, match %u, length %d\n", - start, match, length); - do { - fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); - } while (--length != 0); - z_error("invalid match"); - } - if (z_verbose > 1) { - fprintf(stderr,"\\[%d,%d]", start-match, length); - do { putc(s->window[start++], stderr); } while (--length != 0); - } -} -#else -# define check_match(s, start, match, length) -#endif /* DEBUG */ - -/* =========================================================================== - * Fill the window when the lookahead becomes insufficient. - * Updates strstart and lookahead. - * - * IN assertion: lookahead < MIN_LOOKAHEAD - * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD - * At least one byte has been read, or avail_in == 0; reads are - * performed for at least two bytes (required for the zip translate_eol - * option -- not supported here). - */ -local void fill_window(s) - deflate_state *s; -{ - register unsigned n, m; - register Posf *p; - unsigned more; /* Amount of free space at the end of the window. */ - uInt wsize = s->w_size; - - do { - more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); - - /* Deal with !@#$% 64K limit: */ - if (sizeof(int) <= 2) { - if (more == 0 && s->strstart == 0 && s->lookahead == 0) { - more = wsize; - - } else if (more == (unsigned)(-1)) { - /* Very unlikely, but possible on 16 bit machine if - * strstart == 0 && lookahead == 1 (input done a byte at time) - */ - more--; - } - } - - /* If the window is almost full and there is insufficient lookahead, - * move the upper half to the lower one to make room in the upper half. - */ - if (s->strstart >= wsize+MAX_DIST(s)) { - - zmemcpy(s->window, s->window+wsize, (unsigned)wsize); - s->match_start -= wsize; - s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ - s->block_start -= (long) wsize; - - /* Slide the hash table (could be avoided with 32 bit values - at the expense of memory usage). We slide even when level == 0 - to keep the hash table consistent if we switch back to level > 0 - later. (Using level 0 permanently is not an optimal usage of - zlib, so we don't care about this pathological case.) - */ - /* %%% avoid this when Z_RLE */ - n = s->hash_size; - p = &s->head[n]; - do { - m = *--p; - *p = (Pos)(m >= wsize ? m-wsize : NIL); - } while (--n); - - n = wsize; -#ifndef FASTEST - p = &s->prev[n]; - do { - m = *--p; - *p = (Pos)(m >= wsize ? m-wsize : NIL); - /* If n is not on any hash chain, prev[n] is garbage but - * its value will never be used. - */ - } while (--n); -#endif - more += wsize; - } - if (s->strm->avail_in == 0) return; - - /* If there was no sliding: - * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && - * more == window_size - lookahead - strstart - * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) - * => more >= window_size - 2*WSIZE + 2 - * In the BIG_MEM or MMAP case (not yet supported), - * window_size == input_size + MIN_LOOKAHEAD && - * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. - * Otherwise, window_size == 2*WSIZE so more >= 2. - * If there was sliding, more >= WSIZE. So in all cases, more >= 2. - */ - Assert(more >= 2, "more < 2"); - - n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more); - s->lookahead += n; - - /* Initialize the hash value now that we have some input: */ - if (s->lookahead >= MIN_MATCH) { - s->ins_h = s->window[s->strstart]; - UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); -#if MIN_MATCH != 3 - Call UPDATE_HASH() MIN_MATCH-3 more times -#endif - } - /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, - * but this is not important since only literal bytes will be emitted. - */ - - } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); -} - -/* =========================================================================== - * Flush the current block, with given end-of-file flag. - * IN assertion: strstart is set to the end of the current match. - */ -#define FLUSH_BLOCK_ONLY(s, eof) { \ - _tr_flush_block(s, (s->block_start >= 0L ? \ - (charf *)&s->window[(unsigned)s->block_start] : \ - (charf *)Z_NULL), \ - (ulg)((long)s->strstart - s->block_start), \ - (eof)); \ - s->block_start = s->strstart; \ - flush_pending(s->strm); \ - Tracev((stderr,"[FLUSH]")); \ -} - -/* Same but force premature exit if necessary. */ -#define FLUSH_BLOCK(s, eof) { \ - FLUSH_BLOCK_ONLY(s, eof); \ - if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \ -} - -/* =========================================================================== - * Copy without compression as much as possible from the input stream, return - * the current block state. - * This function does not insert new strings in the dictionary since - * uncompressible data is probably not useful. This function is used - * only for the level=0 compression option. - * NOTE: this function should be optimized to avoid extra copying from - * window to pending_buf. - */ -local block_state deflate_stored(s, flush) - deflate_state *s; - int flush; -{ - /* Stored blocks are limited to 0xffff bytes, pending_buf is limited - * to pending_buf_size, and each stored block has a 5 byte header: - */ - ulg max_block_size = 0xffff; - ulg max_start; - - if (max_block_size > s->pending_buf_size - 5) { - max_block_size = s->pending_buf_size - 5; - } - - /* Copy as much as possible from input to output: */ - for (;;) { - /* Fill the window as much as possible: */ - if (s->lookahead <= 1) { - - Assert(s->strstart < s->w_size+MAX_DIST(s) || - s->block_start >= (long)s->w_size, "slide too late"); - - fill_window(s); - if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more; - - if (s->lookahead == 0) break; /* flush the current block */ - } - Assert(s->block_start >= 0L, "block gone"); - - s->strstart += s->lookahead; - s->lookahead = 0; - - /* Emit a stored block if pending_buf will be full: */ - max_start = s->block_start + max_block_size; - if (s->strstart == 0 || (ulg)s->strstart >= max_start) { - /* strstart == 0 is possible when wraparound on 16-bit machine */ - s->lookahead = (uInt)(s->strstart - max_start); - s->strstart = (uInt)max_start; - FLUSH_BLOCK(s, 0); - } - /* Flush if we may have to slide, otherwise block_start may become - * negative and the data will be gone: - */ - if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { - FLUSH_BLOCK(s, 0); - } - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} - -/* =========================================================================== - * Compress as much as possible from the input stream, return the current - * block state. - * This function does not perform lazy evaluation of matches and inserts - * new strings in the dictionary only for unmatched strings or for short - * matches. It is used only for the fast compression options. - */ -local block_state deflate_fast(s, flush) - deflate_state *s; - int flush; -{ - IPos hash_head = NIL; /* head of the hash chain */ - int bflush; /* set if current block must be flushed */ - - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the next match, plus MIN_MATCH bytes to insert the - * string following the next match. - */ - if (s->lookahead < MIN_LOOKAHEAD) { - fill_window(s); - if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* Insert the string window[strstart .. strstart+2] in the - * dictionary, and set hash_head to the head of the hash chain: - */ - if (s->lookahead >= MIN_MATCH) { - INSERT_STRING(s, s->strstart, hash_head); - } - - /* Find the longest match, discarding those <= prev_length. - * At this point we have always match_length < MIN_MATCH - */ - if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { - /* To simplify the code, we prevent matches with the string - * of window index 0 (in particular we have to avoid a match - * of the string with itself at the start of the input file). - */ -#ifdef FASTEST - if ((s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) || - (s->strategy == Z_RLE && s->strstart - hash_head == 1)) { - s->match_length = longest_match_fast (s, hash_head); - } -#else - if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) { - s->match_length = longest_match (s, hash_head); - } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) { - s->match_length = longest_match_fast (s, hash_head); - } -#endif - /* longest_match() or longest_match_fast() sets match_start */ - } - if (s->match_length >= MIN_MATCH) { - check_match(s, s->strstart, s->match_start, s->match_length); - - _tr_tally_dist(s, s->strstart - s->match_start, - s->match_length - MIN_MATCH, bflush); - - s->lookahead -= s->match_length; - - /* Insert new strings in the hash table only if the match length - * is not too large. This saves time but degrades compression. - */ -#ifndef FASTEST - if (s->match_length <= s->max_insert_length && - s->lookahead >= MIN_MATCH) { - s->match_length--; /* string at strstart already in table */ - do { - s->strstart++; - INSERT_STRING(s, s->strstart, hash_head); - /* strstart never exceeds WSIZE-MAX_MATCH, so there are - * always MIN_MATCH bytes ahead. - */ - } while (--s->match_length != 0); - s->strstart++; - } else -#endif - { - s->strstart += s->match_length; - s->match_length = 0; - s->ins_h = s->window[s->strstart]; - UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); -#if MIN_MATCH != 3 - Call UPDATE_HASH() MIN_MATCH-3 more times -#endif - /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not - * matter since it will be recomputed at next deflate call. - */ - } - } else { - /* No match, output a literal byte */ - Tracevv((stderr,"%c", s->window[s->strstart])); - _tr_tally_lit (s, s->window[s->strstart], bflush); - s->lookahead--; - s->strstart++; - } - if (bflush) FLUSH_BLOCK(s, 0); - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} - -#ifndef FASTEST -/* =========================================================================== - * Same as above, but achieves better compression. We use a lazy - * evaluation for matches: a match is finally adopted only if there is - * no better match at the next window position. - */ -local block_state deflate_slow(s, flush) - deflate_state *s; - int flush; -{ - IPos hash_head = NIL; /* head of hash chain */ - int bflush; /* set if current block must be flushed */ - - /* Process the input block. */ - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the next match, plus MIN_MATCH bytes to insert the - * string following the next match. - */ - if (s->lookahead < MIN_LOOKAHEAD) { - fill_window(s); - if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* Insert the string window[strstart .. strstart+2] in the - * dictionary, and set hash_head to the head of the hash chain: - */ - if (s->lookahead >= MIN_MATCH) { - INSERT_STRING(s, s->strstart, hash_head); - } - - /* Find the longest match, discarding those <= prev_length. - */ - s->prev_length = s->match_length, s->prev_match = s->match_start; - s->match_length = MIN_MATCH-1; - - if (hash_head != NIL && s->prev_length < s->max_lazy_match && - s->strstart - hash_head <= MAX_DIST(s)) { - /* To simplify the code, we prevent matches with the string - * of window index 0 (in particular we have to avoid a match - * of the string with itself at the start of the input file). - */ - if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) { - s->match_length = longest_match (s, hash_head); - } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) { - s->match_length = longest_match_fast (s, hash_head); - } - /* longest_match() or longest_match_fast() sets match_start */ - - if (s->match_length <= 5 && (s->strategy == Z_FILTERED -#if TOO_FAR <= 32767 - || (s->match_length == MIN_MATCH && - s->strstart - s->match_start > TOO_FAR) -#endif - )) { - - /* If prev_match is also MIN_MATCH, match_start is garbage - * but we will ignore the current match anyway. - */ - s->match_length = MIN_MATCH-1; - } - } - /* If there was a match at the previous step and the current - * match is not better, output the previous match: - */ - if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { - uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; - /* Do not insert strings in hash table beyond this. */ - - check_match(s, s->strstart-1, s->prev_match, s->prev_length); - - _tr_tally_dist(s, s->strstart -1 - s->prev_match, - s->prev_length - MIN_MATCH, bflush); - - /* Insert in hash table all strings up to the end of the match. - * strstart-1 and strstart are already inserted. If there is not - * enough lookahead, the last two strings are not inserted in - * the hash table. - */ - s->lookahead -= s->prev_length-1; - s->prev_length -= 2; - do { - if (++s->strstart <= max_insert) { - INSERT_STRING(s, s->strstart, hash_head); - } - } while (--s->prev_length != 0); - s->match_available = 0; - s->match_length = MIN_MATCH-1; - s->strstart++; - - if (bflush) FLUSH_BLOCK(s, 0); - - } else if (s->match_available) { - /* If there was no match at the previous position, output a - * single literal. If there was a match but the current match - * is longer, truncate the previous match to a single literal. - */ - Tracevv((stderr,"%c", s->window[s->strstart-1])); - _tr_tally_lit(s, s->window[s->strstart-1], bflush); - if (bflush) { - FLUSH_BLOCK_ONLY(s, 0); - } - s->strstart++; - s->lookahead--; - if (s->strm->avail_out == 0) return need_more; - } else { - /* There is no previous match to compare with, wait for - * the next step to decide. - */ - s->match_available = 1; - s->strstart++; - s->lookahead--; - } - } - Assert (flush != Z_NO_FLUSH, "no flush?"); - if (s->match_available) { - Tracevv((stderr,"%c", s->window[s->strstart-1])); - _tr_tally_lit(s, s->window[s->strstart-1], bflush); - s->match_available = 0; - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} -#endif /* FASTEST */ - -#if 0 -/* =========================================================================== - * For Z_RLE, simply look for runs of bytes, generate matches only of distance - * one. Do not maintain a hash table. (It will be regenerated if this run of - * deflate switches away from Z_RLE.) - */ -local block_state deflate_rle(s, flush) - deflate_state *s; - int flush; -{ - int bflush; /* set if current block must be flushed */ - uInt run; /* length of run */ - uInt max; /* maximum length of run */ - uInt prev; /* byte at distance one to match */ - Bytef *scan; /* scan for end of run */ - - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the longest encodable run. - */ - if (s->lookahead < MAX_MATCH) { - fill_window(s); - if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* See how many times the previous byte repeats */ - run = 0; - if (s->strstart > 0) { /* if there is a previous byte, that is */ - max = s->lookahead < MAX_MATCH ? s->lookahead : MAX_MATCH; - scan = s->window + s->strstart - 1; - prev = *scan++; - do { - if (*scan++ != prev) - break; - } while (++run < max); - } - - /* Emit match if have run of MIN_MATCH or longer, else emit literal */ - if (run >= MIN_MATCH) { - check_match(s, s->strstart, s->strstart - 1, run); - _tr_tally_dist(s, 1, run - MIN_MATCH, bflush); - s->lookahead -= run; - s->strstart += run; - } else { - /* No match, output a literal byte */ - Tracevv((stderr,"%c", s->window[s->strstart])); - _tr_tally_lit (s, s->window[s->strstart], bflush); - s->lookahead--; - s->strstart++; - } - if (bflush) FLUSH_BLOCK(s, 0); - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} -#endif diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.h b/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.h deleted file mode 100644 index d01a3c10e449..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/deflate.h +++ /dev/null @@ -1,331 +0,0 @@ -/* deflate.h -- internal compression state - * Copyright (C) 1995-2004 Jean-loup Gailly - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -#ifndef _DEFLATE_H -#define _DEFLATE_H - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include "zutil.h" - -/* define NO_GZIP when compiling if you want to disable gzip header and - trailer creation by deflate(). NO_GZIP would be used to avoid linking in - the crc code when it is not needed. For shared libraries, gzip encoding - should be left enabled. */ -#ifndef NO_GZIP -# define GZIP -#endif - -/* =========================================================================== - * Internal compression state. - */ - -#define LENGTH_CODES 29 -/* number of length codes, not counting the special END_BLOCK code */ - -#define LITERALS 256 -/* number of literal bytes 0..255 */ - -#define L_CODES (LITERALS+1+LENGTH_CODES) -/* number of Literal or Length codes, including the END_BLOCK code */ - -#define D_CODES 30 -/* number of distance codes */ - -#define BL_CODES 19 -/* number of codes used to transfer the bit lengths */ - -#define HEAP_SIZE (2*L_CODES+1) -/* maximum heap size */ - -#define MAX_BITS 15 -/* All codes must not exceed MAX_BITS bits */ - -#define INIT_STATE 42 -#define EXTRA_STATE 69 -#define NAME_STATE 73 -#define COMMENT_STATE 91 -#define HCRC_STATE 103 -#define BUSY_STATE 113 -#define FINISH_STATE 666 -/* Stream status */ - - -/* Data structure describing a single value and its code string. */ -typedef struct ct_data_s { - union { - ush freq; /* frequency count */ - ush code; /* bit string */ - } fc; - union { - ush dad; /* father node in Huffman tree */ - ush len; /* length of bit string */ - } dl; -} FAR ct_data; - -#define Freq fc.freq -#define Code fc.code -#define Dad dl.dad -#define Len dl.len - -typedef struct static_tree_desc_s static_tree_desc; - -typedef struct tree_desc_s { - ct_data *dyn_tree; /* the dynamic tree */ - int max_code; /* largest code with non zero frequency */ - static_tree_desc *stat_desc; /* the corresponding static tree */ -} FAR tree_desc; - -typedef ush Pos; -typedef Pos FAR Posf; -typedef unsigned IPos; - -/* A Pos is an index in the character window. We use short instead of int to - * save space in the various tables. IPos is used only for parameter passing. - */ - -typedef struct internal_state { - z_streamp strm; /* pointer back to this zlib stream */ - int status; /* as the name implies */ - Bytef *pending_buf; /* output still pending */ - ulg pending_buf_size; /* size of pending_buf */ - Bytef *pending_out; /* next pending byte to output to the stream */ - uInt pending; /* nb of bytes in the pending buffer */ - int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ - gz_headerp gzhead; /* gzip header information to write */ - uInt gzindex; /* where in extra, name, or comment */ - Byte method; /* STORED (for zip only) or DEFLATED */ - int last_flush; /* value of flush param for previous deflate call */ - - /* used by deflate.c: */ - - uInt w_size; /* LZ77 window size (32K by default) */ - uInt w_bits; /* log2(w_size) (8..16) */ - uInt w_mask; /* w_size - 1 */ - - Bytef *window; - /* Sliding window. Input bytes are read into the second half of the window, - * and move to the first half later to keep a dictionary of at least wSize - * bytes. With this organization, matches are limited to a distance of - * wSize-MAX_MATCH bytes, but this ensures that IO is always - * performed with a length multiple of the block size. Also, it limits - * the window size to 64K, which is quite useful on MSDOS. - * To do: use the user input buffer as sliding window. - */ - - ulg window_size; - /* Actual size of window: 2*wSize, except when the user input buffer - * is directly used as sliding window. - */ - - Posf *prev; - /* Link to older string with same hash index. To limit the size of this - * array to 64K, this link is maintained only for the last 32K strings. - * An index in this array is thus a window index modulo 32K. - */ - - Posf *head; /* Heads of the hash chains or NIL. */ - - uInt ins_h; /* hash index of string to be inserted */ - uInt hash_size; /* number of elements in hash table */ - uInt hash_bits; /* log2(hash_size) */ - uInt hash_mask; /* hash_size-1 */ - - uInt hash_shift; - /* Number of bits by which ins_h must be shifted at each input - * step. It must be such that after MIN_MATCH steps, the oldest - * byte no longer takes part in the hash key, that is: - * hash_shift * MIN_MATCH >= hash_bits - */ - - long block_start; - /* Window position at the beginning of the current output block. Gets - * negative when the window is moved backwards. - */ - - uInt match_length; /* length of best match */ - IPos prev_match; /* previous match */ - int match_available; /* set if previous match exists */ - uInt strstart; /* start of string to insert */ - uInt match_start; /* start of matching string */ - uInt lookahead; /* number of valid bytes ahead in window */ - - uInt prev_length; - /* Length of the best match at previous step. Matches not greater than this - * are discarded. This is used in the lazy match evaluation. - */ - - uInt max_chain_length; - /* To speed up deflation, hash chains are never searched beyond this - * length. A higher limit improves compression ratio but degrades the - * speed. - */ - - uInt max_lazy_match; - /* Attempt to find a better match only when the current match is strictly - * smaller than this value. This mechanism is used only for compression - * levels >= 4. - */ -# define max_insert_length max_lazy_match - /* Insert new strings in the hash table only if the match length is not - * greater than this length. This saves time but degrades compression. - * max_insert_length is used only for compression levels <= 3. - */ - - int level; /* compression level (1..9) */ - int strategy; /* favor or force Huffman coding*/ - - uInt good_match; - /* Use a faster search when the previous match is longer than this */ - - int nice_match; /* Stop searching when current match exceeds this */ - - /* used by trees.c: */ - /* Didn't use ct_data typedef below to supress compiler warning */ - struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */ - struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */ - struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */ - - struct tree_desc_s l_desc; /* desc. for literal tree */ - struct tree_desc_s d_desc; /* desc. for distance tree */ - struct tree_desc_s bl_desc; /* desc. for bit length tree */ - - ush bl_count[MAX_BITS+1]; - /* number of codes at each bit length for an optimal tree */ - - int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */ - int heap_len; /* number of elements in the heap */ - int heap_max; /* element of largest frequency */ - /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used. - * The same heap array is used to build all trees. - */ - - uch depth[2*L_CODES+1]; - /* Depth of each subtree used as tie breaker for trees of equal frequency - */ - - uchf *l_buf; /* buffer for literals or lengths */ - - uInt lit_bufsize; - /* Size of match buffer for literals/lengths. There are 4 reasons for - * limiting lit_bufsize to 64K: - * - frequencies can be kept in 16 bit counters - * - if compression is not successful for the first block, all input - * data is still in the window so we can still emit a stored block even - * when input comes from standard input. (This can also be done for - * all blocks if lit_bufsize is not greater than 32K.) - * - if compression is not successful for a file smaller than 64K, we can - * even emit a stored file instead of a stored block (saving 5 bytes). - * This is applicable only for zip (not gzip or zlib). - * - creating new Huffman trees less frequently may not provide fast - * adaptation to changes in the input data statistics. (Take for - * example a binary file with poorly compressible code followed by - * a highly compressible string table.) Smaller buffer sizes give - * fast adaptation but have of course the overhead of transmitting - * trees more frequently. - * - I can't count above 4 - */ - - uInt last_lit; /* running index in l_buf */ - - ushf *d_buf; - /* Buffer for distances. To simplify the code, d_buf and l_buf have - * the same number of elements. To use different lengths, an extra flag - * array would be necessary. - */ - - ulg opt_len; /* bit length of current block with optimal trees */ - ulg static_len; /* bit length of current block with static trees */ - uInt matches; /* number of string matches in current block */ - int last_eob_len; /* bit length of EOB code for last block */ - -#ifdef DEBUG - ulg compressed_len; /* total bit length of compressed file mod 2^32 */ - ulg bits_sent; /* bit length of compressed data sent mod 2^32 */ -#endif - - ush bi_buf; - /* Output buffer. bits are inserted starting at the bottom (least - * significant bits). - */ - int bi_valid; - /* Number of valid bits in bi_buf. All bits above the last valid bit - * are always zero. - */ - -} FAR deflate_state; - -/* Output a byte on the stream. - * IN assertion: there is enough room in pending_buf. - */ -#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);} - - -#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) -/* Minimum amount of lookahead, except at the end of the input file. - * See deflate.c for comments about the MIN_MATCH+1. - */ - -#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD) -/* In order to simplify the code, particularly on 16 bit machines, match - * distances are limited to MAX_DIST instead of WSIZE. - */ - - /* in trees.c */ -void _tr_init OF((deflate_state *s)); -int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc)); -void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len, - int eof)); -void _tr_align OF((deflate_state *s)); -void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len, - int eof)); - -#define d_code(dist) \ - ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)]) -/* Mapping from a distance to a distance code. dist is the distance - 1 and - * must not have side effects. _dist_code[256] and _dist_code[257] are never - * used. - */ - -#ifndef DEBUG -/* Inline versions of _tr_tally for speed: */ - -#if defined(GEN_TREES_H) || !defined(STDC) - extern uch _length_code[]; - extern uch _dist_code[]; -#else - extern const uch _length_code[]; - extern const uch _dist_code[]; -#endif - -# define _tr_tally_lit(s, c, flush) \ - { uch cc = (c); \ - s->d_buf[s->last_lit] = 0; \ - s->l_buf[s->last_lit++] = cc; \ - s->dyn_ltree[cc].Freq++; \ - flush = (s->last_lit == s->lit_bufsize-1); \ - } -# define _tr_tally_dist(s, distance, length, flush) \ - { uch len = (length); \ - ush dist = (distance); \ - s->d_buf[s->last_lit] = dist; \ - s->l_buf[s->last_lit++] = len; \ - dist--; \ - s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \ - s->dyn_dtree[d_code(dist)].Freq++; \ - flush = (s->last_lit == s->lit_bufsize-1); \ - } -#else -# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c) -# define _tr_tally_dist(s, distance, length, flush) \ - flush = _tr_tally(s, distance, length) -#endif - -#endif /* _DEFLATE_H */ diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.c b/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.c deleted file mode 100644 index a6dcf3f5c8b8..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.c +++ /dev/null @@ -1,320 +0,0 @@ -/* inffast.c -- fast decoding - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include "zutil.h" -#include "inftrees.h" -#include "inflate.h" -#include "inffast.h" - -#ifndef ASMINF - -/* Allow machine dependent optimization for post-increment or pre-increment. - Based on testing to date, - Pre-increment preferred for: - - PowerPC G3 (Adler) - - MIPS R5000 (Randers-Pehrson) - Post-increment preferred for: - - none - No measurable difference: - - Pentium III (Anderson) - - M68060 (Nikl) - */ -#ifdef POSTINC -# define OFF 0 -# define PUP(a) *(a)++ -#else -# define OFF 1 -# define PUP(a) *++(a) -#endif - -/* - Decode literal, length, and distance codes and write out the resulting - literal and match bytes until either not enough input or output is - available, an end-of-block is encountered, or a data error is encountered. - When large enough input and output buffers are supplied to inflate(), for - example, a 16K input buffer and a 64K output buffer, more than 95% of the - inflate execution time is spent in this routine. - - Entry assumptions: - - state->mode == LEN - strm->avail_in >= 6 - strm->avail_out >= 258 - start >= strm->avail_out - state->bits < 8 - - On return, state->mode is one of: - - LEN -- ran out of enough output space or enough available input - TYPE -- reached end of block code, inflate() to interpret next block - BAD -- error in block data - - Notes: - - - The maximum input bits used by a length/distance pair is 15 bits for the - length code, 5 bits for the length extra, 15 bits for the distance code, - and 13 bits for the distance extra. This totals 48 bits, or six bytes. - Therefore if strm->avail_in >= 6, then there is enough input to avoid - checking for available input while decoding. - - - The maximum bytes that a single length/distance pair can output is 258 - bytes, which is the maximum length that can be coded. inflate_fast() - requires strm->avail_out >= 258 for each loop to avoid checking for - output space. - */ -void inflate_fast(strm, start) -z_streamp strm; -unsigned start; /* inflate()'s starting value for strm->avail_out */ -{ - struct inflate_state FAR *state; - unsigned char FAR *in; /* local strm->next_in */ - unsigned char FAR *last; /* while in < last, enough input available */ - unsigned char FAR *out; /* local strm->next_out */ - unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ - unsigned char FAR *end; /* while out < end, enough space available */ -#ifdef INFLATE_STRICT - unsigned dmax; /* maximum distance from zlib header */ -#endif - unsigned wsize; /* window size or zero if not using window */ - unsigned whave; /* valid bytes in the window */ - unsigned write; /* window write index */ - unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ - unsigned long hold; /* local strm->hold */ - unsigned bits; /* local strm->bits */ - code const FAR *lcode; /* local strm->lencode */ - code const FAR *dcode; /* local strm->distcode */ - unsigned lmask; /* mask for first level of length codes */ - unsigned dmask; /* mask for first level of distance codes */ - code this; /* retrieved table entry */ - unsigned op; /* code bits, operation, extra bits, or */ - /* window position, window bytes to copy */ - unsigned len; /* match length, unused bytes */ - unsigned dist; /* match distance */ - unsigned char FAR *from; /* where to copy match from */ - - /* copy state to local variables */ - state = (struct inflate_state FAR *)strm->state; - in = strm->next_in - OFF; - last = in + (strm->avail_in - 5); - out = strm->next_out - OFF; - beg = out - (start - strm->avail_out); - end = out + (strm->avail_out - 257); -#ifdef INFLATE_STRICT - dmax = state->dmax; -#endif - wsize = state->wsize; - whave = state->whave; - write = state->write; - window = state->window; - hold = state->hold; - bits = state->bits; - lcode = state->lencode; - dcode = state->distcode; - lmask = (1U << state->lenbits) - 1; - dmask = (1U << state->distbits) - 1; - - /* decode literals and length/distances until end-of-block or not enough - input data or output space */ - do { - if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - this = lcode[hold & lmask]; - dolen: - op = (unsigned)(this.bits); - hold >>= op; - bits -= op; - op = (unsigned)(this.op); - if (op == 0) { /* literal */ - Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", this.val)); - PUP(out) = (unsigned char)(this.val); - } - else if (op & 16) { /* length base */ - len = (unsigned)(this.val); - op &= 15; /* number of extra bits */ - if (op) { - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - len += (unsigned)hold & ((1U << op) - 1); - hold >>= op; - bits -= op; - } - Tracevv((stderr, "inflate: length %u\n", len)); - if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - this = dcode[hold & dmask]; - dodist: - op = (unsigned)(this.bits); - hold >>= op; - bits -= op; - op = (unsigned)(this.op); - if (op & 16) { /* distance base */ - dist = (unsigned)(this.val); - op &= 15; /* number of extra bits */ - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - } - dist += (unsigned)hold & ((1U << op) - 1); -#ifdef INFLATE_STRICT - if (dist > dmax) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#endif - hold >>= op; - bits -= op; - Tracevv((stderr, "inflate: distance %u\n", dist)); - op = (unsigned)(out - beg); /* max distance in output */ - if (dist > op) { /* see if copy from window */ - op = dist - op; /* distance back in window */ - if (op > whave) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } - from = window - OFF; - if (write == 0) { /* very common case */ - from += wsize - op; - if (op < len) { /* some from window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - else if (write < op) { /* wrap around window */ - from += wsize + write - op; - op -= write; - if (op < len) { /* some from end of window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = window - OFF; - if (write < len) { /* some from start of window */ - op = write; - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - } - else { /* contiguous in window */ - from += write - op; - if (op < len) { /* some from window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - while (len > 2) { - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } - } - else { - from = out - dist; /* copy direct from output */ - do { /* minimum length is three */ - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } while (len > 2); - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } - } - } - else if ((op & 64) == 0) { /* 2nd level distance code */ - this = dcode[this.val + (hold & ((1U << op) - 1))]; - goto dodist; - } - else { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - } - else if ((op & 64) == 0) { /* 2nd level length code */ - this = lcode[this.val + (hold & ((1U << op) - 1))]; - goto dolen; - } - else if (op & 32) { /* end-of-block */ - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - else { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - } while (in < last && out < end); - - /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ - len = bits >> 3; - in -= len; - bits -= len << 3; - hold &= (1U << bits) - 1; - - /* update state and return */ - strm->next_in = in + OFF; - strm->next_out = out + OFF; - strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); - strm->avail_out = (unsigned)(out < end ? - 257 + (end - out) : 257 - (out - end)); - state->hold = hold; - state->bits = bits; - return; -} - -/* - inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): - - Using bit fields for code structure - - Different op definition to avoid & for extra bits (do & for table bits) - - Three separate decoding do-loops for direct, window, and write == 0 - - Special case for distance > 1 copies to do overlapped load and store copy - - Explicit branch predictions (based on measured branch probabilities) - - Deferring match copy and interspersed it with decoding subsequent codes - - Swapping literal/length else - - Swapping window/direct else - - Larger unrolled copy loops (three is about right) - - Moving len -= 3 statement into middle of loop - */ - -#endif /* !ASMINF */ diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.h b/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.h deleted file mode 100644 index 2d214efa299a..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/inffast.h +++ /dev/null @@ -1,13 +0,0 @@ -/* inffast.h -- header to use inffast.c - * Copyright (C) 1995-2003 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -void inflate_fast OF((z_streamp strm, unsigned start)); diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/inffixed.h b/sys/cddl/contrib/opensolaris/uts/common/zmod/inffixed.h deleted file mode 100644 index ed55df899109..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/inffixed.h +++ /dev/null @@ -1,96 +0,0 @@ - /* inffixed.h -- table for decoding fixed codes - * Generated automatically by makefixed(). - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - - /* WARNING: this file should *not* be used by applications. It - is part of the implementation of the compression library and - is subject to change. Applications should only use zlib.h. - */ - - static const code lenfix[512] = { - {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, - {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, - {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, - {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, - {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, - {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, - {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, - {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, - {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, - {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, - {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, - {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, - {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, - {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, - {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, - {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, - {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, - {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, - {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, - {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, - {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, - {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, - {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, - {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, - {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, - {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, - {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, - {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, - {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, - {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, - {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, - {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, - {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, - {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, - {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, - {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, - {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, - {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, - {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, - {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, - {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, - {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, - {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, - {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, - {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, - {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, - {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, - {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, - {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, - {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, - {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, - {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, - {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, - {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, - {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, - {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, - {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, - {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, - {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, - {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, - {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, - {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, - {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, - {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, - {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, - {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, - {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, - {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, - {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, - {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, - {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, - {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, - {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, - {0,9,255} - }; - - static const code distfix[32] = { - {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, - {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, - {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, - {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, - {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, - {22,5,193},{64,5,0} - }; diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.c b/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.c deleted file mode 100644 index 023e7a121ce7..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.c +++ /dev/null @@ -1,1395 +0,0 @@ -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -/* inflate.c -- zlib decompression - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* - * Change history: - * - * 1.2.beta0 24 Nov 2002 - * - First version -- complete rewrite of inflate to simplify code, avoid - * creation of window when not needed, minimize use of window when it is - * needed, make inffast.c even faster, implement gzip decoding, and to - * improve code readability and style over the previous zlib inflate code - * - * 1.2.beta1 25 Nov 2002 - * - Use pointers for available input and output checking in inffast.c - * - Remove input and output counters in inffast.c - * - Change inffast.c entry and loop from avail_in >= 7 to >= 6 - * - Remove unnecessary second byte pull from length extra in inffast.c - * - Unroll direct copy to three copies per loop in inffast.c - * - * 1.2.beta2 4 Dec 2002 - * - Change external routine names to reduce potential conflicts - * - Correct filename to inffixed.h for fixed tables in inflate.c - * - Make hbuf[] unsigned char to match parameter type in inflate.c - * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset) - * to avoid negation problem on Alphas (64 bit) in inflate.c - * - * 1.2.beta3 22 Dec 2002 - * - Add comments on state->bits assertion in inffast.c - * - Add comments on op field in inftrees.h - * - Fix bug in reuse of allocated window after inflateReset() - * - Remove bit fields--back to byte structure for speed - * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths - * - Change post-increments to pre-increments in inflate_fast(), PPC biased? - * - Add compile time option, POSTINC, to use post-increments instead (Intel?) - * - Make MATCH copy in inflate() much faster for when inflate_fast() not used - * - Use local copies of stream next and avail values, as well as local bit - * buffer and bit count in inflate()--for speed when inflate_fast() not used - * - * 1.2.beta4 1 Jan 2003 - * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings - * - Move a comment on output buffer sizes from inffast.c to inflate.c - * - Add comments in inffast.c to introduce the inflate_fast() routine - * - Rearrange window copies in inflate_fast() for speed and simplification - * - Unroll last copy for window match in inflate_fast() - * - Use local copies of window variables in inflate_fast() for speed - * - Pull out common write == 0 case for speed in inflate_fast() - * - Make op and len in inflate_fast() unsigned for consistency - * - Add FAR to lcode and dcode declarations in inflate_fast() - * - Simplified bad distance check in inflate_fast() - * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new - * source file infback.c to provide a call-back interface to inflate for - * programs like gzip and unzip -- uses window as output buffer to avoid - * window copying - * - * 1.2.beta5 1 Jan 2003 - * - Improved inflateBack() interface to allow the caller to provide initial - * input in strm. - * - Fixed stored blocks bug in inflateBack() - * - * 1.2.beta6 4 Jan 2003 - * - Added comments in inffast.c on effectiveness of POSTINC - * - Typecasting all around to reduce compiler warnings - * - Changed loops from while (1) or do {} while (1) to for (;;), again to - * make compilers happy - * - Changed type of window in inflateBackInit() to unsigned char * - * - * 1.2.beta7 27 Jan 2003 - * - Changed many types to unsigned or unsigned short to avoid warnings - * - Added inflateCopy() function - * - * 1.2.0 9 Mar 2003 - * - Changed inflateBack() interface to provide separate opaque descriptors - * for the in() and out() functions - * - Changed inflateBack() argument and in_func typedef to swap the length - * and buffer address return values for the input function - * - Check next_in and next_out for Z_NULL on entry to inflate() - * - * The history for versions after 1.2.0 are in ChangeLog in zlib distribution. - */ - -#include "zutil.h" -#include "inftrees.h" -#include "inflate.h" -#include "inffast.h" - -#ifdef MAKEFIXED -# ifndef BUILDFIXED -# define BUILDFIXED -# endif -#endif - -/* function prototypes */ -local void fixedtables OF((struct inflate_state FAR *state)); -local int updatewindow OF((z_streamp strm, unsigned out)); -#ifdef BUILDFIXED - void makefixed OF((void)); -#endif -local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf, - unsigned len)); - -int ZEXPORT inflateReset(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - strm->total_in = strm->total_out = state->total = 0; - strm->msg = Z_NULL; - strm->adler = 1; /* to support ill-conceived Java test suite */ - state->mode = HEAD; - state->last = 0; - state->havedict = 0; - state->dmax = 32768U; - state->head = Z_NULL; - state->wsize = 0; - state->whave = 0; - state->write = 0; - state->hold = 0; - state->bits = 0; - state->lencode = state->distcode = state->next = state->codes; - Tracev((stderr, "inflate: reset\n")); - return Z_OK; -} - -int ZEXPORT inflatePrime(strm, bits, value) -z_streamp strm; -int bits; -int value; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR; - value &= (1L << bits) - 1; - state->hold += value << state->bits; - state->bits += bits; - return Z_OK; -} - -int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) -z_streamp strm; -int windowBits; -const char *version; -int stream_size; -{ - struct inflate_state FAR *state; - - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || - stream_size != (int)(sizeof(z_stream))) - return Z_VERSION_ERROR; - if (strm == Z_NULL) return Z_STREAM_ERROR; - strm->msg = Z_NULL; /* in case we return an error */ - if (strm->zalloc == (alloc_func)0) { - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; - } - if (strm->zfree == (free_func)0) strm->zfree = zcfree; - state = (struct inflate_state FAR *) - ZALLOC(strm, 1, sizeof(struct inflate_state)); - if (state == Z_NULL) return Z_MEM_ERROR; - Tracev((stderr, "inflate: allocated\n")); - strm->state = (struct internal_state FAR *)state; - if (windowBits < 0) { - state->wrap = 0; - windowBits = -windowBits; - } - else { - state->wrap = (windowBits >> 4) + 1; -#ifdef GUNZIP - if (windowBits < 48) windowBits &= 15; -#endif - } - if (windowBits < 8 || windowBits > 15) { - ZFREE(strm, state); - strm->state = Z_NULL; - return Z_STREAM_ERROR; - } - state->wbits = (unsigned)windowBits; - state->window = Z_NULL; - return inflateReset(strm); -} - -int ZEXPORT inflateInit_(strm, version, stream_size) -z_streamp strm; -const char *version; -int stream_size; -{ - return inflateInit2_(strm, DEF_WBITS, version, stream_size); -} - -/* - Return state with length and distance decoding tables and index sizes set to - fixed code decoding. Normally this returns fixed tables from inffixed.h. - If BUILDFIXED is defined, then instead this routine builds the tables the - first time it's called, and returns those tables the first time and - thereafter. This reduces the size of the code by about 2K bytes, in - exchange for a little execution time. However, BUILDFIXED should not be - used for threaded applications, since the rewriting of the tables and virgin - may not be thread-safe. - */ -local void fixedtables(state) -struct inflate_state FAR *state; -{ -#ifdef BUILDFIXED - static int virgin = 1; - static code *lenfix, *distfix; - static code fixed[544]; - - /* build fixed huffman tables if first call (may not be thread safe) */ - if (virgin) { - unsigned sym, bits; - static code *next; - - /* literal/length table */ - sym = 0; - while (sym < 144) state->lens[sym++] = 8; - while (sym < 256) state->lens[sym++] = 9; - while (sym < 280) state->lens[sym++] = 7; - while (sym < 288) state->lens[sym++] = 8; - next = fixed; - lenfix = next; - bits = 9; - inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); - - /* distance table */ - sym = 0; - while (sym < 32) state->lens[sym++] = 5; - distfix = next; - bits = 5; - inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); - - /* do this just once */ - virgin = 0; - } -#else /* !BUILDFIXED */ -# include "inffixed.h" -#endif /* BUILDFIXED */ - state->lencode = lenfix; - state->lenbits = 9; - state->distcode = distfix; - state->distbits = 5; -} - -#ifdef MAKEFIXED -#include - -/* - Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also - defines BUILDFIXED, so the tables are built on the fly. makefixed() writes - those tables to stdout, which would be piped to inffixed.h. A small program - can simply call makefixed to do this: - - void makefixed(void); - - int main(void) - { - makefixed(); - return 0; - } - - Then that can be linked with zlib built with MAKEFIXED defined and run: - - a.out > inffixed.h - */ -void makefixed() -{ - unsigned low, size; - struct inflate_state state; - - fixedtables(&state); - puts(" /* inffixed.h -- table for decoding fixed codes"); - puts(" * Generated automatically by makefixed()."); - puts(" */"); - puts(""); - puts(" /* WARNING: this file should *not* be used by applications."); - puts(" It is part of the implementation of this library and is"); - puts(" subject to change. Applications should only use zlib.h."); - puts(" */"); - puts(""); - size = 1U << 9; - printf(" static const code lenfix[%u] = {", size); - low = 0; - for (;;) { - if ((low % 7) == 0) printf("\n "); - printf("{%u,%u,%d}", state.lencode[low].op, state.lencode[low].bits, - state.lencode[low].val); - if (++low == size) break; - putchar(','); - } - puts("\n };"); - size = 1U << 5; - printf("\n static const code distfix[%u] = {", size); - low = 0; - for (;;) { - if ((low % 6) == 0) printf("\n "); - printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits, - state.distcode[low].val); - if (++low == size) break; - putchar(','); - } - puts("\n };"); -} -#endif /* MAKEFIXED */ - -/* - Update the window with the last wsize (normally 32K) bytes written before - returning. If window does not exist yet, create it. This is only called - when a window is already in use, or when output has been written during this - inflate call, but the end of the deflate stream has not been reached yet. - It is also called to create a window for dictionary data when a dictionary - is loaded. - - Providing output buffers larger than 32K to inflate() should provide a speed - advantage, since only the last 32K of output is copied to the sliding window - upon return from inflate(), and since all distances after the first 32K of - output will fall in the output data, making match copies simpler and faster. - The advantage may be dependent on the size of the processor's data caches. - */ -local int updatewindow(strm, out) -z_streamp strm; -unsigned out; -{ - struct inflate_state FAR *state; - unsigned copy, dist; - - state = (struct inflate_state FAR *)strm->state; - - /* if it hasn't been done already, allocate space for the window */ - if (state->window == Z_NULL) { - state->window = (unsigned char FAR *) - ZALLOC(strm, 1U << state->wbits, - sizeof(unsigned char)); - if (state->window == Z_NULL) return 1; - } - - /* if window not in use yet, initialize */ - if (state->wsize == 0) { - state->wsize = 1U << state->wbits; - state->write = 0; - state->whave = 0; - } - - /* copy state->wsize or less output bytes into the circular window */ - copy = out - strm->avail_out; - if (copy >= state->wsize) { - zmemcpy(state->window, strm->next_out - state->wsize, state->wsize); - state->write = 0; - state->whave = state->wsize; - } - else { - dist = state->wsize - state->write; - if (dist > copy) dist = copy; - zmemcpy(state->window + state->write, strm->next_out - copy, dist); - copy -= dist; - if (copy) { - zmemcpy(state->window, strm->next_out - copy, copy); - state->write = copy; - state->whave = state->wsize; - } - else { - state->write += dist; - if (state->write == state->wsize) state->write = 0; - if (state->whave < state->wsize) state->whave += dist; - } - } - return 0; -} - -/* Macros for inflate(): */ - -/* check function to use adler32() for zlib or crc32() for gzip */ -#ifdef GUNZIP -# define UPDATE(check, buf, len) \ - (state->flags ? crc32(check, buf, len) : adler32(check, buf, len)) -#else -# define UPDATE(check, buf, len) adler32(check, buf, len) -#endif - -/* check macros for header crc */ -#ifdef GUNZIP -# define CRC2(check, word) \ - do { \ - hbuf[0] = (unsigned char)(word); \ - hbuf[1] = (unsigned char)((word) >> 8); \ - check = crc32(check, hbuf, 2); \ - } while (0) - -# define CRC4(check, word) \ - do { \ - hbuf[0] = (unsigned char)(word); \ - hbuf[1] = (unsigned char)((word) >> 8); \ - hbuf[2] = (unsigned char)((word) >> 16); \ - hbuf[3] = (unsigned char)((word) >> 24); \ - check = crc32(check, hbuf, 4); \ - } while (0) -#endif - -/* Load registers with state in inflate() for speed */ -#define LOAD() \ - do { \ - put = strm->next_out; \ - left = strm->avail_out; \ - next = strm->next_in; \ - have = strm->avail_in; \ - hold = state->hold; \ - bits = state->bits; \ - } while (0) - -/* Restore state from registers in inflate() */ -#define RESTORE() \ - do { \ - strm->next_out = put; \ - strm->avail_out = left; \ - strm->next_in = next; \ - strm->avail_in = have; \ - state->hold = hold; \ - state->bits = bits; \ - } while (0) - -/* Clear the input bit accumulator */ -#define INITBITS() \ - do { \ - hold = 0; \ - bits = 0; \ - } while (0) - -/* Get a byte of input into the bit accumulator, or return from inflate() - if there is no input available. */ -#define PULLBYTE() \ - do { \ - if (have == 0) goto inf_leave; \ - have--; \ - hold += (unsigned long)(*next++) << bits; \ - bits += 8; \ - } while (0) - -/* Assure that there are at least n bits in the bit accumulator. If there is - not enough available input to do that, then return from inflate(). */ -#define NEEDBITS(n) \ - do { \ - while (bits < (unsigned)(n)) \ - PULLBYTE(); \ - } while (0) - -/* Return the low n bits of the bit accumulator (n < 16) */ -#define BITS(n) \ - ((unsigned)hold & ((1U << (n)) - 1)) - -/* Remove n bits from the bit accumulator */ -#define DROPBITS(n) \ - do { \ - hold >>= (n); \ - bits -= (unsigned)(n); \ - } while (0) - -/* Remove zero to seven bits as needed to go to a byte boundary */ -#define BYTEBITS() \ - do { \ - hold >>= bits & 7; \ - bits -= bits & 7; \ - } while (0) - -/* Reverse the bytes in a 32-bit value */ -#define REVERSE(q) \ - ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ - (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) - -/* - inflate() uses a state machine to process as much input data and generate as - much output data as possible before returning. The state machine is - structured roughly as follows: - - for (;;) switch (state) { - ... - case STATEn: - if (not enough input data or output space to make progress) - return; - ... make progress ... - state = STATEm; - break; - ... - } - - so when inflate() is called again, the same case is attempted again, and - if the appropriate resources are provided, the machine proceeds to the - next state. The NEEDBITS() macro is usually the way the state evaluates - whether it can proceed or should return. NEEDBITS() does the return if - the requested bits are not available. The typical use of the BITS macros - is: - - NEEDBITS(n); - ... do something with BITS(n) ... - DROPBITS(n); - - where NEEDBITS(n) either returns from inflate() if there isn't enough - input left to load n bits into the accumulator, or it continues. BITS(n) - gives the low n bits in the accumulator. When done, DROPBITS(n) drops - the low n bits off the accumulator. INITBITS() clears the accumulator - and sets the number of available bits to zero. BYTEBITS() discards just - enough bits to put the accumulator on a byte boundary. After BYTEBITS() - and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. - - NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return - if there is no input available. The decoding of variable length codes uses - PULLBYTE() directly in order to pull just enough bytes to decode the next - code, and no more. - - Some states loop until they get enough input, making sure that enough - state information is maintained to continue the loop where it left off - if NEEDBITS() returns in the loop. For example, want, need, and keep - would all have to actually be part of the saved state in case NEEDBITS() - returns: - - case STATEw: - while (want < need) { - NEEDBITS(n); - keep[want++] = BITS(n); - DROPBITS(n); - } - state = STATEx; - case STATEx: - - As shown above, if the next state is also the next case, then the break - is omitted. - - A state may also return if there is not enough output space available to - complete that state. Those states are copying stored data, writing a - literal byte, and copying a matching string. - - When returning, a "goto inf_leave" is used to update the total counters, - update the check value, and determine whether any progress has been made - during that inflate() call in order to return the proper return code. - Progress is defined as a change in either strm->avail_in or strm->avail_out. - When there is a window, goto inf_leave will update the window with the last - output written. If a goto inf_leave occurs in the middle of decompression - and there is no window currently, goto inf_leave will create one and copy - output to the window for the next call of inflate(). - - In this implementation, the flush parameter of inflate() only affects the - return code (per zlib.h). inflate() always writes as much as possible to - strm->next_out, given the space available and the provided input--the effect - documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers - the allocation of and copying into a sliding window until necessary, which - provides the effect documented in zlib.h for Z_FINISH when the entire input - stream available. So the only thing the flush parameter actually does is: - when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it - will return Z_BUF_ERROR if it has not reached the end of the stream. - */ - -int ZEXPORT inflate(strm, flush) -z_streamp strm; -int flush; -{ - struct inflate_state FAR *state; - unsigned char FAR *next; /* next input */ - unsigned char FAR *put; /* next output */ - unsigned have, left; /* available input and output */ - unsigned long hold; /* bit buffer */ - unsigned bits; /* bits in bit buffer */ - unsigned in, out; /* save starting available input and output */ - unsigned copy; /* number of stored or match bytes to copy */ - unsigned char FAR *from; /* where to copy match bytes from */ - code this; /* current decoding table entry */ - code last; /* parent table entry */ - unsigned len; /* length to copy for repeats, bits to drop */ - int ret; /* return code */ -#ifdef GUNZIP - unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ -#endif - static const unsigned short order[19] = /* permutation of code lengths */ - {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - - if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL || - (strm->next_in == Z_NULL && strm->avail_in != 0)) - return Z_STREAM_ERROR; - - state = (struct inflate_state FAR *)strm->state; - if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */ - LOAD(); - in = have; - out = left; - ret = Z_OK; - for (;;) - switch (state->mode) { - case HEAD: - if (state->wrap == 0) { - state->mode = TYPEDO; - break; - } - NEEDBITS(16); -#ifdef GUNZIP - if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ - state->check = crc32(0L, Z_NULL, 0); - CRC2(state->check, hold); - INITBITS(); - state->mode = FLAGS; - break; - } - state->flags = 0; /* expect zlib header */ - if (state->head != Z_NULL) - state->head->done = -1; - if (!(state->wrap & 1) || /* check if zlib header allowed */ -#else - if ( -#endif - ((BITS(8) << 8) + (hold >> 8)) % 31) { - strm->msg = (char *)"incorrect header check"; - state->mode = BAD; - break; - } - if (BITS(4) != Z_DEFLATED) { - strm->msg = (char *)"unknown compression method"; - state->mode = BAD; - break; - } - DROPBITS(4); - len = BITS(4) + 8; - if (len > state->wbits) { - strm->msg = (char *)"invalid window size"; - state->mode = BAD; - break; - } - state->dmax = 1U << len; - Tracev((stderr, "inflate: zlib header ok\n")); - strm->adler = state->check = adler32(0L, Z_NULL, 0); - state->mode = hold & 0x200 ? DICTID : TYPE; - INITBITS(); - break; -#ifdef GUNZIP - case FLAGS: - NEEDBITS(16); - state->flags = (int)(hold); - if ((state->flags & 0xff) != Z_DEFLATED) { - strm->msg = (char *)"unknown compression method"; - state->mode = BAD; - break; - } - if (state->flags & 0xe000) { - strm->msg = (char *)"unknown header flags set"; - state->mode = BAD; - break; - } - if (state->head != Z_NULL) - state->head->text = (int)((hold >> 8) & 1); - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - state->mode = TIME; - /*FALLTHRU*/ - case TIME: - NEEDBITS(32); - if (state->head != Z_NULL) - state->head->time = hold; - if (state->flags & 0x0200) CRC4(state->check, hold); - INITBITS(); - state->mode = OS; - /*FALLTHRU*/ - case OS: - NEEDBITS(16); - if (state->head != Z_NULL) { - state->head->xflags = (int)(hold & 0xff); - state->head->os = (int)(hold >> 8); - } - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - state->mode = EXLEN; - /*FALLTHRU*/ - case EXLEN: - if (state->flags & 0x0400) { - NEEDBITS(16); - state->length = (unsigned)(hold); - if (state->head != Z_NULL) - state->head->extra_len = (unsigned)hold; - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - } - else if (state->head != Z_NULL) - state->head->extra = Z_NULL; - state->mode = EXTRA; - /*FALLTHRU*/ - case EXTRA: - if (state->flags & 0x0400) { - copy = state->length; - if (copy > have) copy = have; - if (copy) { - if (state->head != Z_NULL && - state->head->extra != Z_NULL) { - len = state->head->extra_len - state->length; - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); - } - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - state->length -= copy; - } - if (state->length) goto inf_leave; - } - state->length = 0; - state->mode = NAME; - /*FALLTHRU*/ - case NAME: - if (state->flags & 0x0800) { - if (have == 0) goto inf_leave; - copy = 0; - do { - len = (unsigned)(next[copy++]); - if (state->head != Z_NULL && - state->head->name != Z_NULL && - state->length < state->head->name_max) - state->head->name[state->length++] = len; - } while (len && copy < have); - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - if (len) goto inf_leave; - } - else if (state->head != Z_NULL) - state->head->name = Z_NULL; - state->length = 0; - state->mode = COMMENT; - /*FALLTHRU*/ - case COMMENT: - if (state->flags & 0x1000) { - if (have == 0) goto inf_leave; - copy = 0; - do { - len = (unsigned)(next[copy++]); - if (state->head != Z_NULL && - state->head->comment != Z_NULL && - state->length < state->head->comm_max) - state->head->comment[state->length++] = len; - } while (len && copy < have); - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - if (len) goto inf_leave; - } - else if (state->head != Z_NULL) - state->head->comment = Z_NULL; - state->mode = HCRC; - /*FALLTHRU*/ - case HCRC: - if (state->flags & 0x0200) { - NEEDBITS(16); - if (hold != (state->check & 0xffff)) { - strm->msg = (char *)"header crc mismatch"; - state->mode = BAD; - break; - } - INITBITS(); - } - if (state->head != Z_NULL) { - state->head->hcrc = (int)((state->flags >> 9) & 1); - state->head->done = 1; - } - strm->adler = state->check = crc32(0L, Z_NULL, 0); - state->mode = TYPE; - break; -#endif - case DICTID: - NEEDBITS(32); - strm->adler = state->check = REVERSE(hold); - INITBITS(); - state->mode = DICT; - /*FALLTHRU*/ - case DICT: - if (state->havedict == 0) { - RESTORE(); - return Z_NEED_DICT; - } - strm->adler = state->check = adler32(0L, Z_NULL, 0); - state->mode = TYPE; - /*FALLTHRU*/ - case TYPE: - if (flush == Z_BLOCK) goto inf_leave; - /*FALLTHRU*/ - case TYPEDO: - if (state->last) { - BYTEBITS(); - state->mode = CHECK; - break; - } - NEEDBITS(3); - state->last = BITS(1); - DROPBITS(1); - switch (BITS(2)) { - case 0: /* stored block */ - Tracev((stderr, "inflate: stored block%s\n", - state->last ? " (last)" : "")); - state->mode = STORED; - break; - case 1: /* fixed block */ - fixedtables(state); - Tracev((stderr, "inflate: fixed codes block%s\n", - state->last ? " (last)" : "")); - state->mode = LEN; /* decode codes */ - break; - case 2: /* dynamic block */ - Tracev((stderr, "inflate: dynamic codes block%s\n", - state->last ? " (last)" : "")); - state->mode = TABLE; - break; - case 3: - strm->msg = (char *)"invalid block type"; - state->mode = BAD; - } - DROPBITS(2); - break; - case STORED: - BYTEBITS(); /* go to byte boundary */ - NEEDBITS(32); - if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { - strm->msg = (char *)"invalid stored block lengths"; - state->mode = BAD; - break; - } - state->length = (unsigned)hold & 0xffff; - Tracev((stderr, "inflate: stored length %u\n", - state->length)); - INITBITS(); - state->mode = COPY; - /*FALLTHRU*/ - case COPY: - copy = state->length; - if (copy) { - if (copy > have) copy = have; - if (copy > left) copy = left; - if (copy == 0) goto inf_leave; - zmemcpy(put, next, copy); - have -= copy; - next += copy; - left -= copy; - put += copy; - state->length -= copy; - break; - } - Tracev((stderr, "inflate: stored end\n")); - state->mode = TYPE; - break; - case TABLE: - NEEDBITS(14); - state->nlen = BITS(5) + 257; - DROPBITS(5); - state->ndist = BITS(5) + 1; - DROPBITS(5); - state->ncode = BITS(4) + 4; - DROPBITS(4); -#ifndef PKZIP_BUG_WORKAROUND - if (state->nlen > 286 || state->ndist > 30) { - strm->msg = (char *)"too many length or distance symbols"; - state->mode = BAD; - break; - } -#endif - Tracev((stderr, "inflate: table sizes ok\n")); - state->have = 0; - state->mode = LENLENS; - /*FALLTHRU*/ - case LENLENS: - while (state->have < state->ncode) { - NEEDBITS(3); - state->lens[order[state->have++]] = (unsigned short)BITS(3); - DROPBITS(3); - } - while (state->have < 19) - state->lens[order[state->have++]] = 0; - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 7; - ret = inflate_table(CODES, state->lens, 19, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid code lengths set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: code lengths ok\n")); - state->have = 0; - state->mode = CODELENS; - /*FALLTHRU*/ - case CODELENS: - while (state->have < state->nlen + state->ndist) { - for (;;) { - this = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if (this.val < 16) { - NEEDBITS(this.bits); - DROPBITS(this.bits); - state->lens[state->have++] = this.val; - } - else { - if (this.val == 16) { - NEEDBITS(this.bits + 2); - DROPBITS(this.bits); - if (state->have == 0) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - len = state->lens[state->have - 1]; - copy = 3 + BITS(2); - DROPBITS(2); - } - else if (this.val == 17) { - NEEDBITS(this.bits + 3); - DROPBITS(this.bits); - len = 0; - copy = 3 + BITS(3); - DROPBITS(3); - } - else { - NEEDBITS(this.bits + 7); - DROPBITS(this.bits); - len = 0; - copy = 11 + BITS(7); - DROPBITS(7); - } - if (state->have + copy > state->nlen + state->ndist) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - while (copy--) - state->lens[state->have++] = (unsigned short)len; - } - } - - /* handle error breaks in while */ - if (state->mode == BAD) break; - - /* build code tables */ - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 9; - ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid literal/lengths set"; - state->mode = BAD; - break; - } - state->distcode = (code const FAR *)(state->next); - state->distbits = 6; - ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, - &(state->next), &(state->distbits), state->work); - if (ret) { - strm->msg = (char *)"invalid distances set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: codes ok\n")); - state->mode = LEN; - /*FALLTHRU*/ - case LEN: - if (have >= 6 && left >= 258) { - RESTORE(); - inflate_fast(strm, out); - LOAD(); - break; - } - for (;;) { - this = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if (this.op && (this.op & 0xf0) == 0) { - last = this; - for (;;) { - this = state->lencode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + this.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(this.bits); - state->length = (unsigned)this.val; - if ((int)(this.op) == 0) { - Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", this.val)); - state->mode = LIT; - break; - } - if (this.op & 32) { - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - if (this.op & 64) { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - state->extra = (unsigned)(this.op) & 15; - state->mode = LENEXT; - /*FALLTHRU*/ - case LENEXT: - if (state->extra) { - NEEDBITS(state->extra); - state->length += BITS(state->extra); - DROPBITS(state->extra); - } - Tracevv((stderr, "inflate: length %u\n", state->length)); - state->mode = DIST; - /*FALLTHRU*/ - case DIST: - for (;;) { - this = state->distcode[BITS(state->distbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if ((this.op & 0xf0) == 0) { - last = this; - for (;;) { - this = state->distcode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + this.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(this.bits); - if (this.op & 64) { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - state->offset = (unsigned)this.val; - state->extra = (unsigned)(this.op) & 15; - state->mode = DISTEXT; - /*FALLTHRU*/ - case DISTEXT: - if (state->extra) { - NEEDBITS(state->extra); - state->offset += BITS(state->extra); - DROPBITS(state->extra); - } -#ifdef INFLATE_STRICT - if (state->offset > state->dmax) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#endif - if (state->offset > state->whave + out - left) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } - Tracevv((stderr, "inflate: distance %u\n", state->offset)); - state->mode = MATCH; - /*FALLTHRU*/ - case MATCH: - if (left == 0) goto inf_leave; - copy = out - left; - if (state->offset > copy) { /* copy from window */ - copy = state->offset - copy; - if (copy > state->write) { - copy -= state->write; - from = state->window + (state->wsize - copy); - } - else - from = state->window + (state->write - copy); - if (copy > state->length) copy = state->length; - } - else { /* copy from output */ - from = put - state->offset; - copy = state->length; - } - if (copy > left) copy = left; - left -= copy; - state->length -= copy; - do { - *put++ = *from++; - } while (--copy); - if (state->length == 0) state->mode = LEN; - break; - case LIT: - if (left == 0) goto inf_leave; - *put++ = (unsigned char)(state->length); - left--; - state->mode = LEN; - break; - case CHECK: - if (state->wrap) { - NEEDBITS(32); - out -= left; - strm->total_out += out; - state->total += out; - if (out) - strm->adler = state->check = - UPDATE(state->check, put - out, out); - out = left; - if (( -#ifdef GUNZIP - state->flags ? hold : -#endif - REVERSE(hold)) != state->check) { - strm->msg = (char *)"incorrect data check"; - state->mode = BAD; - break; - } - INITBITS(); - Tracev((stderr, "inflate: check matches trailer\n")); - } -#ifdef GUNZIP - state->mode = LENGTH; - /*FALLTHRU*/ - case LENGTH: - if (state->wrap && state->flags) { - NEEDBITS(32); - if (hold != (state->total & 0xffffffffUL)) { - strm->msg = (char *)"incorrect length check"; - state->mode = BAD; - break; - } - INITBITS(); - Tracev((stderr, "inflate: length matches trailer\n")); - } -#endif - state->mode = DONE; - /*FALLTHRU*/ - case DONE: - ret = Z_STREAM_END; - goto inf_leave; - case BAD: - ret = Z_DATA_ERROR; - goto inf_leave; - case MEM: - return Z_MEM_ERROR; - case SYNC: - default: - return Z_STREAM_ERROR; - } - - /* - Return from inflate(), updating the total counts and the check value. - If there was no progress during the inflate() call, return a buffer - error. Call updatewindow() to create and/or update the window state. - Note: a memory error from inflate() is non-recoverable. - */ - inf_leave: - RESTORE(); - if (state->wsize || (state->mode < CHECK && out != strm->avail_out)) - if (updatewindow(strm, out)) { - state->mode = MEM; - return Z_MEM_ERROR; - } - in -= strm->avail_in; - out -= strm->avail_out; - strm->total_in += in; - strm->total_out += out; - state->total += out; - if (state->wrap && out) - strm->adler = state->check = - UPDATE(state->check, strm->next_out - out, out); - strm->data_type = state->bits + (state->last ? 64 : 0) + - (state->mode == TYPE ? 128 : 0); - if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) - ret = Z_BUF_ERROR; - return ret; -} - -int ZEXPORT inflateEnd(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) - return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (state->window != Z_NULL) ZFREE(strm, state->window); - ZFREE(strm, strm->state); - strm->state = Z_NULL; - Tracev((stderr, "inflate: end\n")); - return Z_OK; -} - -int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength) -z_streamp strm; -const Bytef *dictionary; -uInt dictLength; -{ - struct inflate_state FAR *state; - unsigned long id; - - /* check state */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (state->wrap != 0 && state->mode != DICT) - return Z_STREAM_ERROR; - - /* check for correct dictionary id */ - if (state->mode == DICT) { - id = adler32(0L, Z_NULL, 0); - id = adler32(id, dictionary, dictLength); - if (id != state->check) - return Z_DATA_ERROR; - } - - /* copy dictionary to window */ - if (updatewindow(strm, strm->avail_out)) { - state->mode = MEM; - return Z_MEM_ERROR; - } - if (dictLength > state->wsize) { - zmemcpy(state->window, dictionary + dictLength - state->wsize, - state->wsize); - state->whave = state->wsize; - } - else { - zmemcpy(state->window + state->wsize - dictLength, dictionary, - dictLength); - state->whave = dictLength; - } - state->havedict = 1; - Tracev((stderr, "inflate: dictionary set\n")); - return Z_OK; -} - -int ZEXPORT inflateGetHeader(strm, head) -z_streamp strm; -gz_headerp head; -{ - struct inflate_state FAR *state; - - /* check state */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if ((state->wrap & 2) == 0) return Z_STREAM_ERROR; - - /* save header structure */ - state->head = head; - head->done = 0; - return Z_OK; -} - -/* - Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found - or when out of input. When called, *have is the number of pattern bytes - found in order so far, in 0..3. On return *have is updated to the new - state. If on return *have equals four, then the pattern was found and the - return value is how many bytes were read including the last byte of the - pattern. If *have is less than four, then the pattern has not been found - yet and the return value is len. In the latter case, syncsearch() can be - called again with more data and the *have state. *have is initialized to - zero for the first call. - */ -local unsigned syncsearch(have, buf, len) -unsigned FAR *have; -unsigned char FAR *buf; -unsigned len; -{ - unsigned got; - unsigned next; - - got = *have; - next = 0; - while (next < len && got < 4) { - if ((int)(buf[next]) == (got < 2 ? 0 : 0xff)) - got++; - else if (buf[next]) - got = 0; - else - got = 4 - got; - next++; - } - *have = got; - return next; -} - -int ZEXPORT inflateSync(strm) -z_streamp strm; -{ - unsigned len; /* number of bytes to look at or looked at */ - unsigned long in, out; /* temporary to save total_in and total_out */ - unsigned char buf[4]; /* to restore bit buffer to byte string */ - struct inflate_state FAR *state; - - /* check parameters */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR; - - /* if first time, start search in bit buffer */ - if (state->mode != SYNC) { - state->mode = SYNC; - state->hold <<= state->bits & 7; - state->bits -= state->bits & 7; - len = 0; - while (state->bits >= 8) { - buf[len++] = (unsigned char)(state->hold); - state->hold >>= 8; - state->bits -= 8; - } - state->have = 0; - (void) syncsearch(&(state->have), buf, len); - } - - /* search available input */ - len = syncsearch(&(state->have), strm->next_in, strm->avail_in); - strm->avail_in -= len; - strm->next_in += len; - strm->total_in += len; - - /* return no joy or set up to restart inflate() on a new block */ - if (state->have != 4) return Z_DATA_ERROR; - in = strm->total_in; out = strm->total_out; - (void) inflateReset(strm); - strm->total_in = in; strm->total_out = out; - state->mode = TYPE; - return Z_OK; -} - -/* - Returns true if inflate is currently at the end of a block generated by - Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP - implementation to provide an additional safety check. PPP uses - Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored - block. When decompressing, PPP checks that at the end of input packet, - inflate is waiting for these length bytes. - */ -int ZEXPORT inflateSyncPoint(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - return state->mode == STORED && state->bits == 0; -} - -int ZEXPORT inflateCopy(dest, source) -z_streamp dest; -z_streamp source; -{ - struct inflate_state FAR *state; - struct inflate_state FAR *copy; - unsigned char FAR *window; - unsigned wsize; - - /* check input */ - if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL || - source->zalloc == (alloc_func)0 || source->zfree == (free_func)0) - return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)source->state; - - /* allocate space */ - copy = (struct inflate_state FAR *) - ZALLOC(source, 1, sizeof(struct inflate_state)); - if (copy == Z_NULL) return Z_MEM_ERROR; - window = Z_NULL; - if (state->window != Z_NULL) { - window = (unsigned char FAR *) - ZALLOC(source, 1U << state->wbits, sizeof(unsigned char)); - if (window == Z_NULL) { - ZFREE(source, copy); - return Z_MEM_ERROR; - } - } - - /* copy state */ - zmemcpy(dest, source, sizeof(z_stream)); - zmemcpy(copy, state, sizeof(struct inflate_state)); - if (state->lencode >= state->codes && - state->lencode <= state->codes + ENOUGH - 1) { - copy->lencode = copy->codes + (state->lencode - state->codes); - copy->distcode = copy->codes + (state->distcode - state->codes); - } - copy->next = copy->codes + (state->next - state->codes); - if (window != Z_NULL) { - wsize = 1U << state->wbits; - zmemcpy(window, state->window, wsize); - } - copy->window = window; - dest->state = (struct internal_state FAR *)copy; - return Z_OK; -} diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.h b/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.h deleted file mode 100644 index 4d28b221770b..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/inflate.h +++ /dev/null @@ -1,117 +0,0 @@ -/* inflate.h -- internal inflate state definition - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* define NO_GZIP when compiling if you want to disable gzip header and - trailer decoding by inflate(). NO_GZIP would be used to avoid linking in - the crc code when it is not needed. For shared libraries, gzip decoding - should be left enabled. */ -#ifndef NO_GZIP -# define GUNZIP -#endif - -/* Possible inflate modes between inflate() calls */ -typedef enum { - HEAD, /* i: waiting for magic header */ - FLAGS, /* i: waiting for method and flags (gzip) */ - TIME, /* i: waiting for modification time (gzip) */ - OS, /* i: waiting for extra flags and operating system (gzip) */ - EXLEN, /* i: waiting for extra length (gzip) */ - EXTRA, /* i: waiting for extra bytes (gzip) */ - NAME, /* i: waiting for end of file name (gzip) */ - COMMENT, /* i: waiting for end of comment (gzip) */ - HCRC, /* i: waiting for header crc (gzip) */ - DICTID, /* i: waiting for dictionary check value */ - DICT, /* waiting for inflateSetDictionary() call */ - TYPE, /* i: waiting for type bits, including last-flag bit */ - TYPEDO, /* i: same, but skip check to exit inflate on new block */ - STORED, /* i: waiting for stored size (length and complement) */ - COPY, /* i/o: waiting for input or output to copy stored block */ - TABLE, /* i: waiting for dynamic block table lengths */ - LENLENS, /* i: waiting for code length code lengths */ - CODELENS, /* i: waiting for length/lit and distance code lengths */ - LEN, /* i: waiting for length/lit code */ - LENEXT, /* i: waiting for length extra bits */ - DIST, /* i: waiting for distance code */ - DISTEXT, /* i: waiting for distance extra bits */ - MATCH, /* o: waiting for output space to copy string */ - LIT, /* o: waiting for output space to write literal */ - CHECK, /* i: waiting for 32-bit check value */ - LENGTH, /* i: waiting for 32-bit length (gzip) */ - DONE, /* finished check, done -- remain here until reset */ - BAD, /* got a data error -- remain here until reset */ - MEM, /* got an inflate() memory error -- remain here until reset */ - SYNC /* looking for synchronization bytes to restart inflate() */ -} inflate_mode; - -/* - State transitions between above modes - - - (most modes can go to the BAD or MEM mode -- not shown for clarity) - - Process header: - HEAD -> (gzip) or (zlib) - (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME - NAME -> COMMENT -> HCRC -> TYPE - (zlib) -> DICTID or TYPE - DICTID -> DICT -> TYPE - Read deflate blocks: - TYPE -> STORED or TABLE or LEN or CHECK - STORED -> COPY -> TYPE - TABLE -> LENLENS -> CODELENS -> LEN - Read deflate codes: - LEN -> LENEXT or LIT or TYPE - LENEXT -> DIST -> DISTEXT -> MATCH -> LEN - LIT -> LEN - Process trailer: - CHECK -> LENGTH -> DONE - */ - -/* state maintained between inflate() calls. Approximately 7K bytes. */ -struct inflate_state { - inflate_mode mode; /* current inflate mode */ - int last; /* true if processing last block */ - int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ - int havedict; /* true if dictionary provided */ - int flags; /* gzip header method and flags (0 if zlib) */ - unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ - unsigned long check; /* protected copy of check value */ - unsigned long total; /* protected copy of output count */ - gz_headerp head; /* where to save gzip header information */ - /* sliding window */ - unsigned wbits; /* log base 2 of requested window size */ - unsigned wsize; /* window size or zero if not using window */ - unsigned whave; /* valid bytes in the window */ - unsigned write; /* window write index */ - unsigned char FAR *window; /* allocated sliding window, if needed */ - /* bit accumulator */ - unsigned long hold; /* input bit accumulator */ - unsigned bits; /* number of bits in "in" */ - /* for string and stored block copying */ - unsigned length; /* literal or length of data to copy */ - unsigned offset; /* distance back to copy string from */ - /* for table and code decoding */ - unsigned extra; /* extra bits needed */ - /* fixed and dynamic code tables */ - code const FAR *lencode; /* starting table for length/literal codes */ - code const FAR *distcode; /* starting table for distance codes */ - unsigned lenbits; /* index bits for lencode */ - unsigned distbits; /* index bits for distcode */ - /* dynamic table building */ - unsigned ncode; /* number of code length code lengths */ - unsigned nlen; /* number of length code lengths */ - unsigned ndist; /* number of distance code lengths */ - unsigned have; /* number of code lengths in lens[] */ - code FAR *next; /* next available space in codes[] */ - unsigned short lens[320]; /* temporary storage for code lengths */ - unsigned short work[288]; /* work area for code table building */ - code codes[ENOUGH]; /* space for code tables */ -}; diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.c b/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.c deleted file mode 100644 index 2d371675301c..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.c +++ /dev/null @@ -1,331 +0,0 @@ -/* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include "zutil.h" -#include "inftrees.h" - -#define MAXBITS 15 - -static const char inflate_copyright[] = - " inflate 1.2.3 Copyright 1995-2005 Mark Adler "; -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ - -/* - Build a set of tables to decode the provided canonical Huffman code. - The code lengths are lens[0..codes-1]. The result starts at *table, - whose indices are 0..2^bits-1. work is a writable array of at least - lens shorts, which is used as a work area. type is the type of code - to be generated, CODES, LENS, or DISTS. On return, zero is success, - -1 is an invalid code, and +1 means that ENOUGH isn't enough. table - on return points to the next available entry's address. bits is the - requested root table index bits, and on return it is the actual root - table index bits. It will differ if the request is greater than the - longest code or if it is less than the shortest code. - */ -int inflate_table(type, lens, codes, table, bits, work) -codetype type; -unsigned short FAR *lens; -unsigned codes; -code FAR * FAR *table; -unsigned FAR *bits; -unsigned short FAR *work; -{ - unsigned len; /* a code's length in bits */ - unsigned sym; /* index of code symbols */ - unsigned min, max; /* minimum and maximum code lengths */ - unsigned root; /* number of index bits for root table */ - unsigned curr; /* number of index bits for current table */ - unsigned drop; /* code bits to drop for sub-table */ - int left; /* number of prefix codes available */ - unsigned used; /* code entries in table used */ - unsigned huff; /* Huffman code */ - unsigned incr; /* for incrementing code, index */ - unsigned fill; /* index for replicating entries */ - unsigned low; /* low bits for current root entry */ - unsigned mask; /* mask for low root bits */ - code this; /* table entry for duplication */ - code FAR *next; /* next available space in table */ - const unsigned short FAR *base; /* base value table to use */ - const unsigned short FAR *extra; /* extra bits table to use */ - int end; /* use base and extra for symbol > end */ - unsigned short count[MAXBITS+1]; /* number of codes of each length */ - unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ - static const unsigned short lbase[31] = { /* Length codes 257..285 base */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - static const unsigned short lext[31] = { /* Length codes 257..285 extra */ - 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, - 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196}; - static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577, 0, 0}; - static const unsigned short dext[32] = { /* Distance codes 0..29 extra */ - 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, - 23, 23, 24, 24, 25, 25, 26, 26, 27, 27, - 28, 28, 29, 29, 64, 64}; - - /* - Process a set of code lengths to create a canonical Huffman code. The - code lengths are lens[0..codes-1]. Each length corresponds to the - symbols 0..codes-1. The Huffman code is generated by first sorting the - symbols by length from short to long, and retaining the symbol order - for codes with equal lengths. Then the code starts with all zero bits - for the first code of the shortest length, and the codes are integer - increments for the same length, and zeros are appended as the length - increases. For the deflate format, these bits are stored backwards - from their more natural integer increment ordering, and so when the - decoding tables are built in the large loop below, the integer codes - are incremented backwards. - - This routine assumes, but does not check, that all of the entries in - lens[] are in the range 0..MAXBITS. The caller must assure this. - 1..MAXBITS is interpreted as that code length. zero means that that - symbol does not occur in this code. - - The codes are sorted by computing a count of codes for each length, - creating from that a table of starting indices for each length in the - sorted table, and then entering the symbols in order in the sorted - table. The sorted table is work[], with that space being provided by - the caller. - - The length counts are used for other purposes as well, i.e. finding - the minimum and maximum length codes, determining if there are any - codes at all, checking for a valid set of lengths, and looking ahead - at length counts to determine sub-table sizes when building the - decoding tables. - */ - - /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ - for (len = 0; len <= MAXBITS; len++) - count[len] = 0; - for (sym = 0; sym < codes; sym++) - count[lens[sym]]++; - - /* bound code lengths, force root to be within code lengths */ - root = *bits; - for (max = MAXBITS; max >= 1; max--) - if (count[max] != 0) break; - if (root > max) root = max; - if (max == 0) { /* no symbols to code at all */ - this.op = (unsigned char)64; /* invalid code marker */ - this.bits = (unsigned char)1; - this.val = (unsigned short)0; - *(*table)++ = this; /* make a table to force an error */ - *(*table)++ = this; - *bits = 1; - return 0; /* no symbols, but wait for decoding to report error */ - } - for (min = 1; min <= MAXBITS; min++) - if (count[min] != 0) break; - if (root < min) root = min; - - /* check for an over-subscribed or incomplete set of lengths */ - left = 1; - for (len = 1; len <= MAXBITS; len++) { - left <<= 1; - left -= count[len]; - if (left < 0) return -1; /* over-subscribed */ - } - if (left > 0 && (type == CODES || max != 1)) - return -1; /* incomplete set */ - - /* generate offsets into symbol table for each length for sorting */ - offs[1] = 0; - for (len = 1; len < MAXBITS; len++) - offs[len + 1] = offs[len] + count[len]; - - /* sort symbols by length, by symbol order within each length */ - for (sym = 0; sym < codes; sym++) - if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; - - /* - Create and fill in decoding tables. In this loop, the table being - filled is at next and has curr index bits. The code being used is huff - with length len. That code is converted to an index by dropping drop - bits off of the bottom. For codes where len is less than drop + curr, - those top drop + curr - len bits are incremented through all values to - fill the table with replicated entries. - - root is the number of index bits for the root table. When len exceeds - root, sub-tables are created pointed to by the root entry with an index - of the low root bits of huff. This is saved in low to check for when a - new sub-table should be started. drop is zero when the root table is - being filled, and drop is root when sub-tables are being filled. - - When a new sub-table is needed, it is necessary to look ahead in the - code lengths to determine what size sub-table is needed. The length - counts are used for this, and so count[] is decremented as codes are - entered in the tables. - - used keeps track of how many table entries have been allocated from the - provided *table space. It is checked when a LENS table is being made - against the space in *table, ENOUGH, minus the maximum space needed by - the worst case distance code, MAXD. This should never happen, but the - sufficiency of ENOUGH has not been proven exhaustively, hence the check. - This assumes that when type == LENS, bits == 9. - - sym increments through all symbols, and the loop terminates when - all codes of length max, i.e. all codes, have been processed. This - routine permits incomplete codes, so another loop after this one fills - in the rest of the decoding tables with invalid code markers. - */ - - /* set up for code type */ - switch (type) { - case CODES: - base = extra = work; /* dummy value--not used */ - end = 19; - break; - case LENS: - base = lbase; - base -= 257; - extra = lext; - extra -= 257; - end = 256; - break; - default: /* DISTS */ - base = dbase; - extra = dext; - end = -1; - } - - /* initialize state for loop */ - huff = 0; /* starting code */ - sym = 0; /* starting code symbol */ - len = min; /* starting code length */ - next = *table; /* current table to fill in */ - curr = root; /* current table index bits */ - drop = 0; /* current bits to drop from code for index */ - low = (unsigned)(-1); /* trigger new sub-table when len > root */ - used = 1U << root; /* use root table entries */ - mask = used - 1; /* mask for comparing low */ - - /* check available table space */ - if (type == LENS && used >= ENOUGH - MAXD) - return 1; - - /* process all codes and make table entries */ - for (;;) { - /* create table entry */ - this.bits = (unsigned char)(len - drop); - if ((int)(work[sym]) < end) { - this.op = (unsigned char)0; - this.val = work[sym]; - } - else if ((int)(work[sym]) > end) { - this.op = (unsigned char)(extra[work[sym]]); - this.val = base[work[sym]]; - } - else { - this.op = (unsigned char)(32 + 64); /* end of block */ - this.val = 0; - } - - /* replicate for those indices with low len bits equal to huff */ - incr = 1U << (len - drop); - fill = 1U << curr; - min = fill; /* save offset to next table */ - do { - fill -= incr; - next[(huff >> drop) + fill] = this; - } while (fill != 0); - - /* backwards increment the len-bit code huff */ - incr = 1U << (len - 1); - while (huff & incr) - incr >>= 1; - if (incr != 0) { - huff &= incr - 1; - huff += incr; - } - else - huff = 0; - - /* go to next symbol, update count, len */ - sym++; - if (--(count[len]) == 0) { - if (len == max) break; - len = lens[work[sym]]; - } - - /* create new sub-table if needed */ - if (len > root && (huff & mask) != low) { - /* if first time, transition to sub-tables */ - if (drop == 0) - drop = root; - - /* increment past last table */ - next += min; /* here min is 1 << curr */ - - /* determine length of next table */ - curr = len - drop; - left = (int)(1 << curr); - while (curr + drop < max) { - left -= count[curr + drop]; - if (left <= 0) break; - curr++; - left <<= 1; - } - - /* check for enough space */ - used += 1U << curr; - if (type == LENS && used >= ENOUGH - MAXD) - return 1; - - /* point entry in root table to sub-table */ - low = huff & mask; - (*table)[low].op = (unsigned char)curr; - (*table)[low].bits = (unsigned char)root; - (*table)[low].val = (unsigned short)(next - *table); - } - } - - /* - Fill in rest of table for incomplete codes. This loop is similar to the - loop above in incrementing huff for table indices. It is assumed that - len is equal to curr + drop, so there is no loop needed to increment - through high index bits. When the current sub-table is filled, the loop - drops back to the root table to fill in any remaining entries there. - */ - this.op = (unsigned char)64; /* invalid code marker */ - this.bits = (unsigned char)(len - drop); - this.val = (unsigned short)0; - while (huff != 0) { - /* when done with sub-table, drop back to root table */ - if (drop != 0 && (huff & mask) != low) { - drop = 0; - len = root; - next = *table; - this.bits = (unsigned char)len; - } - - /* put invalid code marker in table */ - next[huff >> drop] = this; - - /* backwards increment the len-bit code huff */ - incr = 1U << (len - 1); - while (huff & incr) - incr >>= 1; - if (incr != 0) { - huff &= incr - 1; - huff += incr; - } - else - huff = 0; - } - - /* set return parameters */ - *table += used; - *bits = root; - return 0; -} diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.h b/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.h deleted file mode 100644 index 546e8c082fdb..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/inftrees.h +++ /dev/null @@ -1,57 +0,0 @@ -/* inftrees.h -- header to use inftrees.c - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* Structure for decoding tables. Each entry provides either the - information needed to do the operation requested by the code that - indexed that table entry, or it provides a pointer to another - table that indexes more bits of the code. op indicates whether - the entry is a pointer to another table, a literal, a length or - distance, an end-of-block, or an invalid code. For a table - pointer, the low four bits of op is the number of index bits of - that table. For a length or distance, the low four bits of op - is the number of extra bits to get after the code. bits is - the number of bits in this code or part of the code to drop off - of the bit buffer. val is the actual byte to output in the case - of a literal, the base length or distance, or the offset from - the current table to the next table. Each entry is four bytes. */ -typedef struct { - unsigned char op; /* operation, extra bits, table bits */ - unsigned char bits; /* bits in this part of the code */ - unsigned short val; /* offset in table or code value */ -} code; - -/* op values as set by inflate_table(): - 00000000 - literal - 0000tttt - table link, tttt != 0 is the number of table index bits - 0001eeee - length or distance, eeee is the number of extra bits - 01100000 - end of block - 01000000 - invalid code - */ - -/* Maximum size of dynamic tree. The maximum found in a long but non- - exhaustive search was 1444 code structures (852 for length/literals - and 592 for distances, the latter actually the result of an - exhaustive search). The true maximum is not known, but the value - below is more than safe. */ -#define ENOUGH 2048 -#define MAXD 592 - -/* Type of code to build for inftable() */ -typedef enum { - CODES, - LENS, - DISTS -} codetype; - -extern int inflate_table OF((codetype type, unsigned short FAR *lens, - unsigned codes, code FAR * FAR *table, - unsigned FAR *bits, unsigned short FAR *work)); diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c b/sys/cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c deleted file mode 100644 index 61ad581ef562..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c +++ /dev/null @@ -1,428 +0,0 @@ -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -/* crc32.c -- compute the CRC-32 of a data stream - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - * - * Thanks to Rodney Brown for his contribution of faster - * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing - * tables for updating the shift register in one step with three exclusive-ors - * instead of four steps with four exclusive-ors. This results in about a - * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3. - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* - Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore - protection on the static variables used to control the first-use generation - of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should - first call get_crc_table() to initialize the tables before allowing more than - one thread to use crc32(). - */ - -#ifdef MAKECRCH -# include -# ifndef DYNAMIC_CRC_TABLE -# define DYNAMIC_CRC_TABLE -# endif /* !DYNAMIC_CRC_TABLE */ -#endif /* MAKECRCH */ - -#include "zutil.h" /* for STDC and FAR definitions */ - -#define local static - -/* Find a four-byte integer type for crc32_little() and crc32_big(). */ -#ifndef NOBYFOUR -# ifdef STDC /* need ANSI C limits.h to determine sizes */ -# include -# define BYFOUR -# if (UINT_MAX == 0xffffffffUL) - typedef unsigned int u4; -# else -# if (ULONG_MAX == 0xffffffffUL) - typedef unsigned long u4; -# else -# if (USHRT_MAX == 0xffffffffUL) - typedef unsigned short u4; -# else -# undef BYFOUR /* can't find a four-byte integer type! */ -# endif -# endif -# endif -# endif /* STDC */ -#endif /* !NOBYFOUR */ - -/* Definitions for doing the crc four data bytes at a time. */ -#ifdef BYFOUR -# define REV(w) (((w)>>24)+(((w)>>8)&0xff00)+ \ - (((w)&0xff00)<<8)+(((w)&0xff)<<24)) - local unsigned long crc32_little OF((unsigned long, - const unsigned char FAR *, unsigned)); - local unsigned long crc32_big OF((unsigned long, - const unsigned char FAR *, unsigned)); -# define TBLS 8 -#else -# define TBLS 1 -#endif /* BYFOUR */ - -/* Local functions for crc concatenation */ -local unsigned long gf2_matrix_times OF((unsigned long *mat, - unsigned long vec)); -local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat)); - -#ifdef DYNAMIC_CRC_TABLE - -local volatile int crc_table_empty = 1; -local unsigned long FAR crc_table[TBLS][256]; -local void make_crc_table OF((void)); -#ifdef MAKECRCH - local void write_table OF((FILE *, const unsigned long FAR *)); -#endif /* MAKECRCH */ -/* - Generate tables for a byte-wise 32-bit CRC calculation on the polynomial: - x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. - - Polynomials over GF(2) are represented in binary, one bit per coefficient, - with the lowest powers in the most significant bit. Then adding polynomials - is just exclusive-or, and multiplying a polynomial by x is a right shift by - one. If we call the above polynomial p, and represent a byte as the - polynomial q, also with the lowest power in the most significant bit (so the - byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p, - where a mod b means the remainder after dividing a by b. - - This calculation is done using the shift-register method of multiplying and - taking the remainder. The register is initialized to zero, and for each - incoming bit, x^32 is added mod p to the register if the bit is a one (where - x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by - x (which is shifting right by one and adding x^32 mod p if the bit shifted - out is a one). We start with the highest power (least significant bit) of - q and repeat for all eight bits of q. - - The first table is simply the CRC of all possible eight bit values. This is - all the information needed to generate CRCs on data a byte at a time for all - combinations of CRC register values and incoming bytes. The remaining tables - allow for word-at-a-time CRC calculation for both big-endian and little- - endian machines, where a word is four bytes. -*/ -local void make_crc_table() -{ - unsigned long c; - int n, k; - unsigned long poly; /* polynomial exclusive-or pattern */ - /* terms of polynomial defining this crc (except x^32): */ - static volatile int first = 1; /* flag to limit concurrent making */ - static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; - - /* See if another task is already doing this (not thread-safe, but better - than nothing -- significantly reduces duration of vulnerability in - case the advice about DYNAMIC_CRC_TABLE is ignored) */ - if (first) { - first = 0; - - /* make exclusive-or pattern from polynomial (0xedb88320UL) */ - poly = 0UL; - for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++) - poly |= 1UL << (31 - p[n]); - - /* generate a crc for every 8-bit value */ - for (n = 0; n < 256; n++) { - c = (unsigned long)n; - for (k = 0; k < 8; k++) - c = c & 1 ? poly ^ (c >> 1) : c >> 1; - crc_table[0][n] = c; - } - -#ifdef BYFOUR - /* generate crc for each value followed by one, two, and three zeros, - and then the byte reversal of those as well as the first table */ - for (n = 0; n < 256; n++) { - c = crc_table[0][n]; - crc_table[4][n] = REV(c); - for (k = 1; k < 4; k++) { - c = crc_table[0][c & 0xff] ^ (c >> 8); - crc_table[k][n] = c; - crc_table[k + 4][n] = REV(c); - } - } -#endif /* BYFOUR */ - - crc_table_empty = 0; - } - else { /* not first */ - /* wait for the other guy to finish (not efficient, but rare) */ - while (crc_table_empty) - ; - } - -#ifdef MAKECRCH - /* write out CRC tables to crc32.h */ - { - FILE *out; - - out = fopen("crc32.h", "w"); - if (out == NULL) return; - fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n"); - fprintf(out, " * Generated automatically by crc32.c\n */\n\n"); - fprintf(out, "local const unsigned long FAR "); - fprintf(out, "crc_table[TBLS][256] =\n{\n {\n"); - write_table(out, crc_table[0]); -# ifdef BYFOUR - fprintf(out, "#ifdef BYFOUR\n"); - for (k = 1; k < 8; k++) { - fprintf(out, " },\n {\n"); - write_table(out, crc_table[k]); - } - fprintf(out, "#endif\n"); -# endif /* BYFOUR */ - fprintf(out, " }\n};\n"); - fclose(out); - } -#endif /* MAKECRCH */ -} - -#ifdef MAKECRCH -local void write_table(out, table) - FILE *out; - const unsigned long FAR *table; -{ - int n; - - for (n = 0; n < 256; n++) - fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", table[n], - n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", ")); -} -#endif /* MAKECRCH */ - -#else /* !DYNAMIC_CRC_TABLE */ -/* ======================================================================== - * Tables of CRC-32s of all single-byte values, made by make_crc_table(). - */ -#include "crc32.h" -#endif /* DYNAMIC_CRC_TABLE */ - -/* ========================================================================= - * This function can be used by asm versions of crc32() - */ -const unsigned long FAR * ZEXPORT get_crc_table() -{ -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) - make_crc_table(); -#endif /* DYNAMIC_CRC_TABLE */ - return (const unsigned long FAR *)crc_table; -} - -/* ========================================================================= */ -#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8) -#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1 - -/* ========================================================================= */ -unsigned long ZEXPORT crc32(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - unsigned len; -{ - if (buf == Z_NULL) return 0UL; - -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) - make_crc_table(); -#endif /* DYNAMIC_CRC_TABLE */ - -#ifdef BYFOUR - if (sizeof(void *) == sizeof(ptrdiff_t)) { - u4 endian; - - endian = 1; - if (*((unsigned char *)(&endian))) - return crc32_little(crc, buf, len); - else - return crc32_big(crc, buf, len); - } -#endif /* BYFOUR */ - crc = crc ^ 0xffffffffUL; - while (len >= 8) { - DO8; - len -= 8; - } - if (len) do { - DO1; - } while (--len); - return crc ^ 0xffffffffUL; -} - -#ifdef BYFOUR - -/* ========================================================================= */ -#define DOLIT4 c ^= *buf4++; \ - c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \ - crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24] -#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4 - -/* ========================================================================= */ -local unsigned long crc32_little(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - unsigned len; -{ - register u4 c; - register const u4 FAR *buf4; - - c = (u4)crc; - c = ~c; - while (len && ((ptrdiff_t)buf & 3)) { - c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); - len--; - } - - buf4 = (const u4 FAR *)(const void FAR *)buf; - while (len >= 32) { - DOLIT32; - len -= 32; - } - while (len >= 4) { - DOLIT4; - len -= 4; - } - buf = (const unsigned char FAR *)buf4; - - if (len) do { - c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); - } while (--len); - c = ~c; - return (unsigned long)c; -} - -/* ========================================================================= */ -#define DOBIG4 c ^= *++buf4; \ - c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \ - crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24] -#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4 - -/* ========================================================================= */ -local unsigned long crc32_big(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - unsigned len; -{ - register u4 c; - register const u4 FAR *buf4; - - c = REV((u4)crc); - c = ~c; - while (len && ((ptrdiff_t)buf & 3)) { - c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); - len--; - } - - buf4 = (const u4 FAR *)(const void FAR *)buf; - buf4--; - while (len >= 32) { - DOBIG32; - len -= 32; - } - while (len >= 4) { - DOBIG4; - len -= 4; - } - buf4++; - buf = (const unsigned char FAR *)buf4; - - if (len) do { - c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); - } while (--len); - c = ~c; - return (unsigned long)(REV(c)); -} - -#endif /* BYFOUR */ - -#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */ - -/* ========================================================================= */ -local unsigned long gf2_matrix_times(mat, vec) - unsigned long *mat; - unsigned long vec; -{ - unsigned long sum; - - sum = 0; - while (vec) { - if (vec & 1) - sum ^= *mat; - vec >>= 1; - mat++; - } - return sum; -} - -/* ========================================================================= */ -local void gf2_matrix_square(square, mat) - unsigned long *square; - unsigned long *mat; -{ - int n; - - for (n = 0; n < GF2_DIM; n++) - square[n] = gf2_matrix_times(mat, mat[n]); -} - -/* ========================================================================= */ -uLong ZEXPORT crc32_combine(crc1, crc2, len2) - uLong crc1; - uLong crc2; - z_off_t len2; -{ - int n; - unsigned long row; - unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */ - unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */ - - /* degenerate case */ - if (len2 == 0) - return crc1; - - /* put operator for one zero bit in odd */ - odd[0] = 0xedb88320UL; /* CRC-32 polynomial */ - row = 1; - for (n = 1; n < GF2_DIM; n++) { - odd[n] = row; - row <<= 1; - } - - /* put operator for two zero bits in even */ - gf2_matrix_square(even, odd); - - /* put operator for four zero bits in odd */ - gf2_matrix_square(odd, even); - - /* apply len2 zeros to crc1 (first square will put the operator for one - zero byte, eight zero bits, in even) */ - do { - /* apply zeros operator for this bit of len2 */ - gf2_matrix_square(even, odd); - if (len2 & 1) - crc1 = gf2_matrix_times(even, crc1); - len2 >>= 1; - - /* if no more bits set, then done */ - if (len2 == 0) - break; - - /* another iteration of the loop with odd and even swapped */ - gf2_matrix_square(odd, even); - if (len2 & 1) - crc1 = gf2_matrix_times(odd, crc1); - len2 >>= 1; - - /* if no more bits set, then done */ - } while (len2 != 0); - - /* return combined crc */ - crc1 ^= crc2; - return crc1; -} diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/trees.c b/sys/cddl/contrib/opensolaris/uts/common/zmod/trees.c deleted file mode 100644 index ce0cebc0304c..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/trees.c +++ /dev/null @@ -1,1219 +0,0 @@ -/* trees.c -- output deflated data using Huffman coding - * Copyright (C) 1995-2005 Jean-loup Gailly - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -/* - * ALGORITHM - * - * The "deflation" process uses several Huffman trees. The more - * common source values are represented by shorter bit sequences. - * - * Each code tree is stored in a compressed form which is itself - * a Huffman encoding of the lengths of all the code strings (in - * ascending order by source values). The actual code strings are - * reconstructed from the lengths in the inflate process, as described - * in the deflate specification. - * - * REFERENCES - * - * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification". - * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc - * - * Storer, James A. - * Data Compression: Methods and Theory, pp. 49-50. - * Computer Science Press, 1988. ISBN 0-7167-8156-5. - * - * Sedgewick, R. - * Algorithms, p290. - * Addison-Wesley, 1983. ISBN 0-201-06672-6. - */ - -/* #define GEN_TREES_H */ - -#include "deflate.h" - -#ifdef DEBUG -# include -#endif - -/* =========================================================================== - * Constants - */ - -#define MAX_BL_BITS 7 -/* Bit length codes must not exceed MAX_BL_BITS bits */ - -#define END_BLOCK 256 -/* end of block literal code */ - -#define REP_3_6 16 -/* repeat previous bit length 3-6 times (2 bits of repeat count) */ - -#define REPZ_3_10 17 -/* repeat a zero length 3-10 times (3 bits of repeat count) */ - -#define REPZ_11_138 18 -/* repeat a zero length 11-138 times (7 bits of repeat count) */ - -local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */ - = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0}; - -local const int extra_dbits[D_CODES] /* extra bits for each distance code */ - = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; - -local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */ - = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7}; - -local const uch bl_order[BL_CODES] - = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15}; -/* The lengths of the bit length codes are sent in order of decreasing - * probability, to avoid transmitting the lengths for unused bit length codes. - */ - -#define Buf_size (8 * 2*sizeof(char)) -/* Number of bits used within bi_buf. (bi_buf might be implemented on - * more than 16 bits on some systems.) - */ - -/* =========================================================================== - * Local data. These are initialized only once. - */ - -#define DIST_CODE_LEN 512 /* see definition of array dist_code below */ - -#if defined(GEN_TREES_H) || !defined(STDC) -/* non ANSI compilers may not accept trees.h */ - -local ct_data static_ltree[L_CODES+2]; -/* The static literal tree. Since the bit lengths are imposed, there is no - * need for the L_CODES extra codes used during heap construction. However - * The codes 286 and 287 are needed to build a canonical tree (see _tr_init - * below). - */ - -local ct_data static_dtree[D_CODES]; -/* The static distance tree. (Actually a trivial tree since all codes use - * 5 bits.) - */ - -uch _dist_code[DIST_CODE_LEN]; -/* Distance codes. The first 256 values correspond to the distances - * 3 .. 258, the last 256 values correspond to the top 8 bits of - * the 15 bit distances. - */ - -uch _length_code[MAX_MATCH-MIN_MATCH+1]; -/* length code for each normalized match length (0 == MIN_MATCH) */ - -local int base_length[LENGTH_CODES]; -/* First normalized length for each code (0 = MIN_MATCH) */ - -local int base_dist[D_CODES]; -/* First normalized distance for each code (0 = distance of 1) */ - -#else -# include "trees.h" -#endif /* GEN_TREES_H */ - -struct static_tree_desc_s { - const ct_data *static_tree; /* static tree or NULL */ - const intf *extra_bits; /* extra bits for each code or NULL */ - int extra_base; /* base index for extra_bits */ - int elems; /* max number of elements in the tree */ - int max_length; /* max bit length for the codes */ -}; - -local static_tree_desc static_l_desc = -{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS}; - -local static_tree_desc static_d_desc = -{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS}; - -local static_tree_desc static_bl_desc = -{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS}; - -/* =========================================================================== - * Local (static) routines in this file. - */ - -local void tr_static_init OF((void)); -local void init_block OF((deflate_state *s)); -local void pqdownheap OF((deflate_state *s, ct_data *tree, int k)); -local void gen_bitlen OF((deflate_state *s, tree_desc *desc)); -local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count)); -local void build_tree OF((deflate_state *s, tree_desc *desc)); -local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code)); -local void send_tree OF((deflate_state *s, ct_data *tree, int max_code)); -local int build_bl_tree OF((deflate_state *s)); -local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes, - int blcodes)); -local void compress_block OF((deflate_state *s, ct_data *ltree, - ct_data *dtree)); -local void set_data_type OF((deflate_state *s)); -local unsigned bi_reverse OF((unsigned value, int length)); -local void bi_windup OF((deflate_state *s)); -local void bi_flush OF((deflate_state *s)); -local void copy_block OF((deflate_state *s, charf *buf, unsigned len, - int header)); - -#ifdef GEN_TREES_H -local void gen_trees_header OF((void)); -#endif - -#ifndef DEBUG -# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len) - /* Send a code of the given tree. c and tree must not have side effects */ - -#else /* DEBUG */ -# define send_code(s, c, tree) \ - { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \ - send_bits(s, tree[c].Code, tree[c].Len); } -#endif - -/* =========================================================================== - * Output a short LSB first on the stream. - * IN assertion: there is enough room in pendingBuf. - */ -#define put_short(s, w) { \ - put_byte(s, (uch)((w) & 0xff)); \ - put_byte(s, (uch)((ush)(w) >> 8)); \ -} - -/* =========================================================================== - * Send a value on a given number of bits. - * IN assertion: length <= 16 and value fits in length bits. - */ -#ifdef DEBUG -local void send_bits OF((deflate_state *s, int value, int length)); - -local void send_bits(s, value, length) - deflate_state *s; - int value; /* value to send */ - int length; /* number of bits */ -{ - Tracevv((stderr," l %2d v %4x ", length, value)); - Assert(length > 0 && length <= 15, "invalid length"); - s->bits_sent += (ulg)length; - - /* If not enough room in bi_buf, use (valid) bits from bi_buf and - * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid)) - * unused bits in value. - */ - if (s->bi_valid > (int)Buf_size - length) { - s->bi_buf |= (value << s->bi_valid); - put_short(s, s->bi_buf); - s->bi_buf = (ush)value >> (Buf_size - s->bi_valid); - s->bi_valid += length - Buf_size; - } else { - s->bi_buf |= value << s->bi_valid; - s->bi_valid += length; - } -} -#else /* !DEBUG */ - -#define send_bits(s, value, length) \ -{ int len = length;\ - if (s->bi_valid > (int)Buf_size - len) {\ - int val = value;\ - s->bi_buf |= (val << s->bi_valid);\ - put_short(s, s->bi_buf);\ - s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\ - s->bi_valid += len - Buf_size;\ - } else {\ - s->bi_buf |= (value) << s->bi_valid;\ - s->bi_valid += len;\ - }\ -} -#endif /* DEBUG */ - - -/* the arguments must not have side effects */ - -/* =========================================================================== - * Initialize the various 'constant' tables. - */ -local void tr_static_init() -{ -#if defined(GEN_TREES_H) || !defined(STDC) - static int static_init_done = 0; - int n; /* iterates over tree elements */ - int bits; /* bit counter */ - int length; /* length value */ - int code; /* code value */ - int dist; /* distance index */ - ush bl_count[MAX_BITS+1]; - /* number of codes at each bit length for an optimal tree */ - - if (static_init_done) return; - - /* For some embedded targets, global variables are not initialized: */ - static_l_desc.static_tree = static_ltree; - static_l_desc.extra_bits = extra_lbits; - static_d_desc.static_tree = static_dtree; - static_d_desc.extra_bits = extra_dbits; - static_bl_desc.extra_bits = extra_blbits; - - /* Initialize the mapping length (0..255) -> length code (0..28) */ - length = 0; - for (code = 0; code < LENGTH_CODES-1; code++) { - base_length[code] = length; - for (n = 0; n < (1< dist code (0..29) */ - dist = 0; - for (code = 0 ; code < 16; code++) { - base_dist[code] = dist; - for (n = 0; n < (1<>= 7; /* from now on, all distances are divided by 128 */ - for ( ; code < D_CODES; code++) { - base_dist[code] = dist << 7; - for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) { - _dist_code[256 + dist++] = (uch)code; - } - } - Assert (dist == 256, "tr_static_init: 256+dist != 512"); - - /* Construct the codes of the static literal tree */ - for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0; - n = 0; - while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++; - while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++; - while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++; - while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++; - /* Codes 286 and 287 do not exist, but we must include them in the - * tree construction to get a canonical Huffman tree (longest code - * all ones) - */ - gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count); - - /* The static distance tree is trivial: */ - for (n = 0; n < D_CODES; n++) { - static_dtree[n].Len = 5; - static_dtree[n].Code = bi_reverse((unsigned)n, 5); - } - static_init_done = 1; - -# ifdef GEN_TREES_H - gen_trees_header(); -# endif -#endif /* defined(GEN_TREES_H) || !defined(STDC) */ -} - -/* =========================================================================== - * Genererate the file trees.h describing the static trees. - */ -#ifdef GEN_TREES_H -# ifndef DEBUG -# include -# endif - -# define SEPARATOR(i, last, width) \ - ((i) == (last)? "\n};\n\n" : \ - ((i) % (width) == (width)-1 ? ",\n" : ", ")) - -void gen_trees_header() -{ - FILE *header = fopen("trees.h", "w"); - int i; - - Assert (header != NULL, "Can't open trees.h"); - fprintf(header, - "/* header created automatically with -DGEN_TREES_H */\n\n"); - - fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n"); - for (i = 0; i < L_CODES+2; i++) { - fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code, - static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5)); - } - - fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n"); - for (i = 0; i < D_CODES; i++) { - fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code, - static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5)); - } - - fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n"); - for (i = 0; i < DIST_CODE_LEN; i++) { - fprintf(header, "%2u%s", _dist_code[i], - SEPARATOR(i, DIST_CODE_LEN-1, 20)); - } - - fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n"); - for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) { - fprintf(header, "%2u%s", _length_code[i], - SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20)); - } - - fprintf(header, "local const int base_length[LENGTH_CODES] = {\n"); - for (i = 0; i < LENGTH_CODES; i++) { - fprintf(header, "%1u%s", base_length[i], - SEPARATOR(i, LENGTH_CODES-1, 20)); - } - - fprintf(header, "local const int base_dist[D_CODES] = {\n"); - for (i = 0; i < D_CODES; i++) { - fprintf(header, "%5u%s", base_dist[i], - SEPARATOR(i, D_CODES-1, 10)); - } - - fclose(header); -} -#endif /* GEN_TREES_H */ - -/* =========================================================================== - * Initialize the tree data structures for a new zlib stream. - */ -void _tr_init(s) - deflate_state *s; -{ - tr_static_init(); - - s->l_desc.dyn_tree = s->dyn_ltree; - s->l_desc.stat_desc = &static_l_desc; - - s->d_desc.dyn_tree = s->dyn_dtree; - s->d_desc.stat_desc = &static_d_desc; - - s->bl_desc.dyn_tree = s->bl_tree; - s->bl_desc.stat_desc = &static_bl_desc; - - s->bi_buf = 0; - s->bi_valid = 0; - s->last_eob_len = 8; /* enough lookahead for inflate */ -#ifdef DEBUG - s->compressed_len = 0L; - s->bits_sent = 0L; -#endif - - /* Initialize the first block of the first file: */ - init_block(s); -} - -/* =========================================================================== - * Initialize a new block. - */ -local void init_block(s) - deflate_state *s; -{ - int n; /* iterates over tree elements */ - - /* Initialize the trees. */ - for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0; - for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0; - for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0; - - s->dyn_ltree[END_BLOCK].Freq = 1; - s->opt_len = s->static_len = 0L; - s->last_lit = s->matches = 0; -} - -#define SMALLEST 1 -/* Index within the heap array of least frequent node in the Huffman tree */ - - -/* =========================================================================== - * Remove the smallest element from the heap and recreate the heap with - * one less element. Updates heap and heap_len. - */ -#define pqremove(s, tree, top) \ -{\ - top = s->heap[SMALLEST]; \ - s->heap[SMALLEST] = s->heap[s->heap_len--]; \ - pqdownheap(s, tree, SMALLEST); \ -} - -/* =========================================================================== - * Compares to subtrees, using the tree depth as tie breaker when - * the subtrees have equal frequency. This minimizes the worst case length. - */ -#define smaller(tree, n, m, depth) \ - (tree[n].Freq < tree[m].Freq || \ - (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m])) - -/* =========================================================================== - * Restore the heap property by moving down the tree starting at node k, - * exchanging a node with the smallest of its two sons if necessary, stopping - * when the heap property is re-established (each father smaller than its - * two sons). - */ -local void pqdownheap(s, tree, k) - deflate_state *s; - ct_data *tree; /* the tree to restore */ - int k; /* node to move down */ -{ - int v = s->heap[k]; - int j = k << 1; /* left son of k */ - while (j <= s->heap_len) { - /* Set j to the smallest of the two sons: */ - if (j < s->heap_len && - smaller(tree, s->heap[j+1], s->heap[j], s->depth)) { - j++; - } - /* Exit if v is smaller than both sons */ - if (smaller(tree, v, s->heap[j], s->depth)) break; - - /* Exchange v with the smallest son */ - s->heap[k] = s->heap[j]; k = j; - - /* And continue down the tree, setting j to the left son of k */ - j <<= 1; - } - s->heap[k] = v; -} - -/* =========================================================================== - * Compute the optimal bit lengths for a tree and update the total bit length - * for the current block. - * IN assertion: the fields freq and dad are set, heap[heap_max] and - * above are the tree nodes sorted by increasing frequency. - * OUT assertions: the field len is set to the optimal bit length, the - * array bl_count contains the frequencies for each bit length. - * The length opt_len is updated; static_len is also updated if stree is - * not null. - */ -local void gen_bitlen(s, desc) - deflate_state *s; - tree_desc *desc; /* the tree descriptor */ -{ - ct_data *tree = desc->dyn_tree; - int max_code = desc->max_code; - const ct_data *stree = desc->stat_desc->static_tree; - const intf *extra = desc->stat_desc->extra_bits; - int base = desc->stat_desc->extra_base; - int max_length = desc->stat_desc->max_length; - int h; /* heap index */ - int n, m; /* iterate over the tree elements */ - int bits; /* bit length */ - int xbits; /* extra bits */ - ush f; /* frequency */ - int overflow = 0; /* number of elements with bit length too large */ - - for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0; - - /* In a first pass, compute the optimal bit lengths (which may - * overflow in the case of the bit length tree). - */ - tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */ - - for (h = s->heap_max+1; h < HEAP_SIZE; h++) { - n = s->heap[h]; - bits = tree[tree[n].Dad].Len + 1; - if (bits > max_length) bits = max_length, overflow++; - tree[n].Len = (ush)bits; - /* We overwrite tree[n].Dad which is no longer needed */ - - if (n > max_code) continue; /* not a leaf node */ - - s->bl_count[bits]++; - xbits = 0; - if (n >= base) xbits = extra[n-base]; - f = tree[n].Freq; - s->opt_len += (ulg)f * (bits + xbits); - if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits); - } - if (overflow == 0) return; - - Trace((stderr,"\nbit length overflow\n")); - /* This happens for example on obj2 and pic of the Calgary corpus */ - - /* Find the first bit length which could increase: */ - do { - bits = max_length-1; - while (s->bl_count[bits] == 0) bits--; - s->bl_count[bits]--; /* move one leaf down the tree */ - s->bl_count[bits+1] += 2; /* move one overflow item as its brother */ - s->bl_count[max_length]--; - /* The brother of the overflow item also moves one step up, - * but this does not affect bl_count[max_length] - */ - overflow -= 2; - } while (overflow > 0); - - /* Now recompute all bit lengths, scanning in increasing frequency. - * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all - * lengths instead of fixing only the wrong ones. This idea is taken - * from 'ar' written by Haruhiko Okumura.) - */ - for (bits = max_length; bits != 0; bits--) { - n = s->bl_count[bits]; - while (n != 0) { - m = s->heap[--h]; - if (m > max_code) continue; - if ((unsigned) tree[m].Len != (unsigned) bits) { - Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits)); - s->opt_len += ((long)bits - (long)tree[m].Len) - *(long)tree[m].Freq; - tree[m].Len = (ush)bits; - } - n--; - } - } -} - -/* =========================================================================== - * Generate the codes for a given tree and bit counts (which need not be - * optimal). - * IN assertion: the array bl_count contains the bit length statistics for - * the given tree and the field len is set for all tree elements. - * OUT assertion: the field code is set for all tree elements of non - * zero code length. - */ -local void gen_codes (tree, max_code, bl_count) - ct_data *tree; /* the tree to decorate */ - int max_code; /* largest code with non zero frequency */ - ushf *bl_count; /* number of codes at each bit length */ -{ - ush next_code[MAX_BITS+1]; /* next code value for each bit length */ - ush code = 0; /* running code value */ - int bits; /* bit index */ - int n; /* code index */ - - /* The distribution counts are first used to generate the code values - * without bit reversal. - */ - for (bits = 1; bits <= MAX_BITS; bits++) { - next_code[bits] = code = (code + bl_count[bits-1]) << 1; - } - /* Check that the bit counts in bl_count are consistent. The last code - * must be all ones. - */ - Assert (code + bl_count[MAX_BITS]-1 == (1<dyn_tree; - const ct_data *stree = desc->stat_desc->static_tree; - int elems = desc->stat_desc->elems; - int n, m; /* iterate over heap elements */ - int max_code = -1; /* largest code with non zero frequency */ - int node; /* new node being created */ - - /* Construct the initial heap, with least frequent element in - * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. - * heap[0] is not used. - */ - s->heap_len = 0, s->heap_max = HEAP_SIZE; - - for (n = 0; n < elems; n++) { - if (tree[n].Freq != 0) { - s->heap[++(s->heap_len)] = max_code = n; - s->depth[n] = 0; - } else { - tree[n].Len = 0; - } - } - - /* The pkzip format requires that at least one distance code exists, - * and that at least one bit should be sent even if there is only one - * possible code. So to avoid special checks later on we force at least - * two codes of non zero frequency. - */ - while (s->heap_len < 2) { - node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0); - tree[node].Freq = 1; - s->depth[node] = 0; - s->opt_len--; if (stree) s->static_len -= stree[node].Len; - /* node is 0 or 1 so it does not have extra bits */ - } - desc->max_code = max_code; - - /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, - * establish sub-heaps of increasing lengths: - */ - for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n); - - /* Construct the Huffman tree by repeatedly combining the least two - * frequent nodes. - */ - node = elems; /* next internal node of the tree */ - do { - pqremove(s, tree, n); /* n = node of least frequency */ - m = s->heap[SMALLEST]; /* m = node of next least frequency */ - - s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */ - s->heap[--(s->heap_max)] = m; - - /* Create a new node father of n and m */ - tree[node].Freq = tree[n].Freq + tree[m].Freq; - s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ? - s->depth[n] : s->depth[m]) + 1); - tree[n].Dad = tree[m].Dad = (ush)node; -#ifdef DUMP_BL_TREE - if (tree == s->bl_tree) { - fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)", - node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq); - } -#endif - /* and insert the new node in the heap */ - s->heap[SMALLEST] = node++; - pqdownheap(s, tree, SMALLEST); - - } while (s->heap_len >= 2); - - s->heap[--(s->heap_max)] = s->heap[SMALLEST]; - - /* At this point, the fields freq and dad are set. We can now - * generate the bit lengths. - */ - gen_bitlen(s, (tree_desc *)desc); - - /* The field len is now set, we can generate the bit codes */ - gen_codes ((ct_data *)tree, max_code, s->bl_count); -} - -/* =========================================================================== - * Scan a literal or distance tree to determine the frequencies of the codes - * in the bit length tree. - */ -local void scan_tree (s, tree, max_code) - deflate_state *s; - ct_data *tree; /* the tree to be scanned */ - int max_code; /* and its largest code of non zero frequency */ -{ - int n; /* iterates over all tree elements */ - int prevlen = -1; /* last emitted length */ - int curlen; /* length of current code */ - int nextlen = tree[0].Len; /* length of next code */ - int count = 0; /* repeat count of the current code */ - int max_count = 7; /* max repeat count */ - int min_count = 4; /* min repeat count */ - - if (nextlen == 0) max_count = 138, min_count = 3; - tree[max_code+1].Len = (ush)0xffff; /* guard */ - - for (n = 0; n <= max_code; n++) { - curlen = nextlen; nextlen = tree[n+1].Len; - if (++count < max_count && curlen == nextlen) { - continue; - } else if (count < min_count) { - s->bl_tree[curlen].Freq += count; - } else if (curlen != 0) { - if (curlen != prevlen) s->bl_tree[curlen].Freq++; - s->bl_tree[REP_3_6].Freq++; - } else if (count <= 10) { - s->bl_tree[REPZ_3_10].Freq++; - } else { - s->bl_tree[REPZ_11_138].Freq++; - } - count = 0; prevlen = curlen; - if (nextlen == 0) { - max_count = 138, min_count = 3; - } else if (curlen == nextlen) { - max_count = 6, min_count = 3; - } else { - max_count = 7, min_count = 4; - } - } -} - -/* =========================================================================== - * Send a literal or distance tree in compressed form, using the codes in - * bl_tree. - */ -local void send_tree (s, tree, max_code) - deflate_state *s; - ct_data *tree; /* the tree to be scanned */ - int max_code; /* and its largest code of non zero frequency */ -{ - int n; /* iterates over all tree elements */ - int prevlen = -1; /* last emitted length */ - int curlen; /* length of current code */ - int nextlen = tree[0].Len; /* length of next code */ - int count = 0; /* repeat count of the current code */ - int max_count = 7; /* max repeat count */ - int min_count = 4; /* min repeat count */ - - /* tree[max_code+1].Len = -1; */ /* guard already set */ - if (nextlen == 0) max_count = 138, min_count = 3; - - for (n = 0; n <= max_code; n++) { - curlen = nextlen; nextlen = tree[n+1].Len; - if (++count < max_count && curlen == nextlen) { - continue; - } else if (count < min_count) { - do { send_code(s, curlen, s->bl_tree); } while (--count != 0); - - } else if (curlen != 0) { - if (curlen != prevlen) { - send_code(s, curlen, s->bl_tree); count--; - } - Assert(count >= 3 && count <= 6, " 3_6?"); - send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2); - - } else if (count <= 10) { - send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3); - - } else { - send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7); - } - count = 0; prevlen = curlen; - if (nextlen == 0) { - max_count = 138, min_count = 3; - } else if (curlen == nextlen) { - max_count = 6, min_count = 3; - } else { - max_count = 7, min_count = 4; - } - } -} - -/* =========================================================================== - * Construct the Huffman tree for the bit lengths and return the index in - * bl_order of the last bit length code to send. - */ -local int build_bl_tree(s) - deflate_state *s; -{ - int max_blindex; /* index of last bit length code of non zero freq */ - - /* Determine the bit length frequencies for literal and distance trees */ - scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code); - scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code); - - /* Build the bit length tree: */ - build_tree(s, (tree_desc *)(&(s->bl_desc))); - /* opt_len now includes the length of the tree representations, except - * the lengths of the bit lengths codes and the 5+5+4 bits for the counts. - */ - - /* Determine the number of bit length codes to send. The pkzip format - * requires that at least 4 bit length codes be sent. (appnote.txt says - * 3 but the actual value used is 4.) - */ - for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) { - if (s->bl_tree[bl_order[max_blindex]].Len != 0) break; - } - /* Update opt_len to include the bit length tree and counts */ - s->opt_len += 3*(max_blindex+1) + 5+5+4; - Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", - s->opt_len, s->static_len)); - - return max_blindex; -} - -/* =========================================================================== - * Send the header for a block using dynamic Huffman trees: the counts, the - * lengths of the bit length codes, the literal tree and the distance tree. - * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4. - */ -local void send_all_trees(s, lcodes, dcodes, blcodes) - deflate_state *s; - int lcodes, dcodes, blcodes; /* number of codes for each tree */ -{ - int rank; /* index in bl_order */ - - Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes"); - Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES, - "too many codes"); - Tracev((stderr, "\nbl counts: ")); - send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */ - send_bits(s, dcodes-1, 5); - send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */ - for (rank = 0; rank < blcodes; rank++) { - Tracev((stderr, "\nbl code %2d ", bl_order[rank])); - send_bits(s, s->bl_tree[bl_order[rank]].Len, 3); - } - Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent)); - - send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */ - Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent)); - - send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */ - Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent)); -} - -/* =========================================================================== - * Send a stored block - */ -void _tr_stored_block(s, buf, stored_len, eof) - deflate_state *s; - charf *buf; /* input block */ - ulg stored_len; /* length of input block */ - int eof; /* true if this is the last block for a file */ -{ - send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */ -#ifdef DEBUG - s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L; - s->compressed_len += (stored_len + 4) << 3; -#endif - copy_block(s, buf, (unsigned)stored_len, 1); /* with header */ -} - -/* =========================================================================== - * Send one empty static block to give enough lookahead for inflate. - * This takes 10 bits, of which 7 may remain in the bit buffer. - * The current inflate code requires 9 bits of lookahead. If the - * last two codes for the previous block (real code plus EOB) were coded - * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode - * the last real code. In this case we send two empty static blocks instead - * of one. (There are no problems if the previous block is stored or fixed.) - * To simplify the code, we assume the worst case of last real code encoded - * on one bit only. - */ -void _tr_align(s) - deflate_state *s; -{ - send_bits(s, STATIC_TREES<<1, 3); - send_code(s, END_BLOCK, static_ltree); -#ifdef DEBUG - s->compressed_len += 10L; /* 3 for block type, 7 for EOB */ -#endif - bi_flush(s); - /* Of the 10 bits for the empty block, we have already sent - * (10 - bi_valid) bits. The lookahead for the last real code (before - * the EOB of the previous block) was thus at least one plus the length - * of the EOB plus what we have just sent of the empty static block. - */ - if (1 + s->last_eob_len + 10 - s->bi_valid < 9) { - send_bits(s, STATIC_TREES<<1, 3); - send_code(s, END_BLOCK, static_ltree); -#ifdef DEBUG - s->compressed_len += 10L; -#endif - bi_flush(s); - } - s->last_eob_len = 7; -} - -/* =========================================================================== - * Determine the best encoding for the current block: dynamic trees, static - * trees or store, and output the encoded block to the zip file. - */ -void _tr_flush_block(s, buf, stored_len, eof) - deflate_state *s; - charf *buf; /* input block, or NULL if too old */ - ulg stored_len; /* length of input block */ - int eof; /* true if this is the last block for a file */ -{ - ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */ - int max_blindex = 0; /* index of last bit length code of non zero freq */ - - /* Build the Huffman trees unless a stored block is forced */ - if (s->level > 0) { - - /* Check if the file is binary or text */ - if (stored_len > 0 && s->strm->data_type == Z_UNKNOWN) - set_data_type(s); - - /* Construct the literal and distance trees */ - build_tree(s, (tree_desc *)(&(s->l_desc))); - Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len, - s->static_len)); - - build_tree(s, (tree_desc *)(&(s->d_desc))); - Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len, - s->static_len)); - /* At this point, opt_len and static_len are the total bit lengths of - * the compressed block data, excluding the tree representations. - */ - - /* Build the bit length tree for the above two trees, and get the index - * in bl_order of the last bit length code to send. - */ - max_blindex = build_bl_tree(s); - - /* Determine the best encoding. Compute the block lengths in bytes. */ - opt_lenb = (s->opt_len+3+7)>>3; - static_lenb = (s->static_len+3+7)>>3; - - Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ", - opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len, - s->last_lit)); - - if (static_lenb <= opt_lenb) opt_lenb = static_lenb; - - } else { - Assert(buf != (char*)0, "lost buf"); - opt_lenb = static_lenb = stored_len + 5; /* force a stored block */ - } - -#ifdef FORCE_STORED - if (buf != (char*)0) { /* force stored block */ -#else - if (stored_len+4 <= opt_lenb && buf != (char*)0) { - /* 4: two words for the lengths */ -#endif - /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE. - * Otherwise we can't have processed more than WSIZE input bytes since - * the last block flush, because compression would have been - * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to - * transform a block into a stored block. - */ - _tr_stored_block(s, buf, stored_len, eof); - -#ifdef FORCE_STATIC - } else if (static_lenb >= 0) { /* force static trees */ -#else - } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) { -#endif - send_bits(s, (STATIC_TREES<<1)+eof, 3); - compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree); -#ifdef DEBUG - s->compressed_len += 3 + s->static_len; -#endif - } else { - send_bits(s, (DYN_TREES<<1)+eof, 3); - send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1, - max_blindex+1); - compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree); -#ifdef DEBUG - s->compressed_len += 3 + s->opt_len; -#endif - } - Assert (s->compressed_len == s->bits_sent, "bad compressed size"); - /* The above check is made mod 2^32, for files larger than 512 MB - * and uLong implemented on 32 bits. - */ - init_block(s); - - if (eof) { - bi_windup(s); -#ifdef DEBUG - s->compressed_len += 7; /* align on byte boundary */ -#endif - } - Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3, - s->compressed_len-7*eof)); -} - -/* =========================================================================== - * Save the match info and tally the frequency counts. Return true if - * the current block must be flushed. - */ -int _tr_tally (s, dist, lc) - deflate_state *s; - unsigned dist; /* distance of matched string */ - unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */ -{ - s->d_buf[s->last_lit] = (ush)dist; - s->l_buf[s->last_lit++] = (uch)lc; - if (dist == 0) { - /* lc is the unmatched char */ - s->dyn_ltree[lc].Freq++; - } else { - s->matches++; - /* Here, lc is the match length - MIN_MATCH */ - dist--; /* dist = match distance - 1 */ - Assert((ush)dist < (ush)MAX_DIST(s) && - (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) && - (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match"); - - s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++; - s->dyn_dtree[d_code(dist)].Freq++; - } - -#ifdef TRUNCATE_BLOCK - /* Try to guess if it is profitable to stop the current block here */ - if ((s->last_lit & 0x1fff) == 0 && s->level > 2) { - /* Compute an upper bound for the compressed length */ - ulg out_length = (ulg)s->last_lit*8L; - ulg in_length = (ulg)((long)s->strstart - s->block_start); - int dcode; - for (dcode = 0; dcode < D_CODES; dcode++) { - out_length += (ulg)s->dyn_dtree[dcode].Freq * - (5L+extra_dbits[dcode]); - } - out_length >>= 3; - Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ", - s->last_lit, in_length, out_length, - 100L - out_length*100L/in_length)); - if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1; - } -#endif - return (s->last_lit == s->lit_bufsize-1); - /* We avoid equality with lit_bufsize because of wraparound at 64K - * on 16 bit machines and because stored blocks are restricted to - * 64K-1 bytes. - */ -} - -/* =========================================================================== - * Send the block data compressed using the given Huffman trees - */ -local void compress_block(s, ltree, dtree) - deflate_state *s; - ct_data *ltree; /* literal tree */ - ct_data *dtree; /* distance tree */ -{ - unsigned dist; /* distance of matched string */ - int lc; /* match length or unmatched char (if dist == 0) */ - unsigned lx = 0; /* running index in l_buf */ - unsigned code; /* the code to send */ - int extra; /* number of extra bits to send */ - - if (s->last_lit != 0) do { - dist = s->d_buf[lx]; - lc = s->l_buf[lx++]; - if (dist == 0) { - send_code(s, lc, ltree); /* send a literal byte */ - Tracecv(isgraph(lc), (stderr," '%c' ", lc)); - } else { - /* Here, lc is the match length - MIN_MATCH */ - code = _length_code[lc]; - send_code(s, code+LITERALS+1, ltree); /* send the length code */ - extra = extra_lbits[code]; - if (extra != 0) { - lc -= base_length[code]; - send_bits(s, lc, extra); /* send the extra length bits */ - } - dist--; /* dist is now the match distance - 1 */ - code = d_code(dist); - Assert (code < D_CODES, "bad d_code"); - - send_code(s, code, dtree); /* send the distance code */ - extra = extra_dbits[code]; - if (extra != 0) { - dist -= base_dist[code]; - send_bits(s, dist, extra); /* send the extra distance bits */ - } - } /* literal or match pair ? */ - - /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */ - Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx, - "pendingBuf overflow"); - - } while (lx < s->last_lit); - - send_code(s, END_BLOCK, ltree); - s->last_eob_len = ltree[END_BLOCK].Len; -} - -/* =========================================================================== - * Set the data type to BINARY or TEXT, using a crude approximation: - * set it to Z_TEXT if all symbols are either printable characters (33 to 255) - * or white spaces (9 to 13, or 32); or set it to Z_BINARY otherwise. - * IN assertion: the fields Freq of dyn_ltree are set. - */ -local void set_data_type(s) - deflate_state *s; -{ - int n; - - for (n = 0; n < 9; n++) - if (s->dyn_ltree[n].Freq != 0) - break; - if (n == 9) - for (n = 14; n < 32; n++) - if (s->dyn_ltree[n].Freq != 0) - break; - s->strm->data_type = (n == 32) ? Z_TEXT : Z_BINARY; -} - -/* =========================================================================== - * Reverse the first len bits of a code, using straightforward code (a faster - * method would use a table) - * IN assertion: 1 <= len <= 15 - */ -local unsigned bi_reverse(code, len) - unsigned code; /* the value to invert */ - int len; /* its bit length */ -{ - register unsigned res = 0; - do { - res |= code & 1; - code >>= 1, res <<= 1; - } while (--len > 0); - return res >> 1; -} - -/* =========================================================================== - * Flush the bit buffer, keeping at most 7 bits in it. - */ -local void bi_flush(s) - deflate_state *s; -{ - if (s->bi_valid == 16) { - put_short(s, s->bi_buf); - s->bi_buf = 0; - s->bi_valid = 0; - } else if (s->bi_valid >= 8) { - put_byte(s, (Byte)s->bi_buf); - s->bi_buf >>= 8; - s->bi_valid -= 8; - } -} - -/* =========================================================================== - * Flush the bit buffer and align the output on a byte boundary - */ -local void bi_windup(s) - deflate_state *s; -{ - if (s->bi_valid > 8) { - put_short(s, s->bi_buf); - } else if (s->bi_valid > 0) { - put_byte(s, (Byte)s->bi_buf); - } - s->bi_buf = 0; - s->bi_valid = 0; -#ifdef DEBUG - s->bits_sent = (s->bits_sent+7) & ~7; -#endif -} - -/* =========================================================================== - * Copy a stored block, storing first the length and its - * one's complement if requested. - */ -local void copy_block(s, buf, len, header) - deflate_state *s; - charf *buf; /* the input data */ - unsigned len; /* its length */ - int header; /* true if block header must be written */ -{ - bi_windup(s); /* align on byte boundary */ - s->last_eob_len = 8; /* enough lookahead for inflate */ - - if (header) { - put_short(s, (ush)len); - put_short(s, (ush)~len); -#ifdef DEBUG - s->bits_sent += 2*16; -#endif - } -#ifdef DEBUG - s->bits_sent += (ulg)len<<3; -#endif - while (len--) { - put_byte(s, *buf++); - } -} diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/zconf.h b/sys/cddl/contrib/opensolaris/uts/common/zmod/zconf.h deleted file mode 100644 index ccce7b2742da..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/zconf.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * CDDL HEADER START - * - * The contents of this file are subject to the terms of the - * Common Development and Distribution License (the "License"). - * You may not use this file except in compliance with the License. - * - * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - * or http://www.opensolaris.org/os/licensing. - * See the License for the specific language governing permissions - * and limitations under the License. - * - * When distributing Covered Code, include this CDDL HEADER in each - * file and include the License file at usr/src/OPENSOLARIS.LICENSE. - * If applicable, add the following below this CDDL HEADER, with the - * fields enclosed by brackets "[]" replaced with your own identifying - * information: Portions Copyright [yyyy] [name of copyright owner] - * - * CDDL HEADER END - */ - -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -#ifndef _ZCONF_H -#define _ZCONF_H - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include -#include -#include - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * We don't want to turn on zlib's debugging. - */ -#undef DEBUG - -/* - * We define our own memory allocation and deallocation routines that use kmem. - */ -#define MY_ZCALLOC - -/* - * We don't define HAVE_MEMCPY here, but do in zutil.c, and implement our - * our versions of zmemcpy(), zmemzero(), and zmemcmp(). - */ - -/* - * We have a sufficiently capable compiler as to not need zlib's compiler hack. - */ -#define NO_DUMMY_DECL - -#define compressBound(len) (len + (len >> 12) + (len >> 14) + 11) - -#define z_off_t off_t -#define OF(p) p -#define ZEXTERN extern -#define ZEXPORT -#define ZEXPORTVA -#define FAR - -#define deflateInit_ z_deflateInit_ -#define deflate z_deflate -#define deflateEnd z_deflateEnd -#define inflateInit_ z_inflateInit_ -#define inflate z_inflate -#define inflateEnd z_inflateEnd -#define deflateInit2_ z_deflateInit2_ -#define deflateSetDictionary z_deflateSetDictionary -#define deflateCopy z_deflateCopy -#define deflateReset z_deflateReset -#define deflateParams z_deflateParams -#define deflateBound z_deflateBound -#define deflatePrime z_deflatePrime -#define inflateInit2_ z_inflateInit2_ -#define inflateSetDictionary z_inflateSetDictionary -#define inflateSync z_inflateSync -#define inflateSyncPoint z_inflateSyncPoint -#define inflateCopy z_inflateCopy -#define inflateReset z_inflateReset -#define inflateBack z_inflateBack -#define inflateBackEnd z_inflateBackEnd -#define compress zz_compress -#define compress2 zz_compress2 -#define uncompress zz_uncompress -#define adler32 z_adler32 -#define crc32 z_crc32 -#define get_crc_table z_get_crc_table -#define zError z_zError - -#define MAX_MEM_LEVEL 9 -#define MAX_WBITS 15 - -typedef unsigned char Byte; -typedef unsigned int uInt; -typedef unsigned long uLong; -typedef Byte Bytef; -typedef char charf; -typedef int intf; -typedef uInt uIntf; -typedef uLong uLongf; -typedef void *voidpc; -typedef void *voidpf; -typedef void *voidp; - -#ifdef __cplusplus -} -#endif - -#endif /* _ZCONF_H */ diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/zlib.h b/sys/cddl/contrib/opensolaris/uts/common/zmod/zlib.h deleted file mode 100644 index 9b971a0f5722..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/zlib.h +++ /dev/null @@ -1,1359 +0,0 @@ -/* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.2.3, July 18th, 2005 - - Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - jloup@gzip.org madler@alumni.caltech.edu - - - The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt - (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). -*/ - -#ifndef _ZLIB_H -#define _ZLIB_H - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include "zconf.h" - -#ifdef __cplusplus -extern "C" { -#endif - -#define ZLIB_VERSION "1.2.3" -#define ZLIB_VERNUM 0x1230 - -/* - The 'zlib' compression library provides in-memory compression and - decompression functions, including integrity checks of the uncompressed - data. This version of the library supports only one compression method - (deflation) but other algorithms will be added later and will have the same - stream interface. - - Compression can be done in a single step if the buffers are large - enough (for example if an input file is mmap'ed), or can be done by - repeated calls of the compression function. In the latter case, the - application must provide more input and/or consume the output - (providing more output space) before each call. - - The compressed data format used by default by the in-memory functions is - the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped - around a deflate stream, which is itself documented in RFC 1951. - - The library also supports reading and writing files in gzip (.gz) format - with an interface similar to that of stdio using the functions that start - with "gz". The gzip format is different from the zlib format. gzip is a - gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. - - This library can optionally read and write gzip streams in memory as well. - - The zlib format was designed to be compact and fast for use in memory - and on communications channels. The gzip format was designed for single- - file compression on file systems, has a larger header than zlib to maintain - directory information, and uses a different, slower check method than zlib. - - The library does not install any signal handler. The decoder checks - the consistency of the compressed data, so the library should never - crash even in case of corrupted input. -*/ - -typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); -typedef void (*free_func) OF((voidpf opaque, voidpf address)); - -struct internal_state; - -typedef struct z_stream_s { - Bytef *next_in; /* next input byte */ - uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total nb of input bytes read so far */ - - Bytef *next_out; /* next output byte should be put there */ - uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total nb of bytes output so far */ - - char *msg; /* last error message, NULL if no error */ - struct internal_state FAR *state; /* not visible by applications */ - - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - voidpf opaque; /* private data object passed to zalloc and zfree */ - - int data_type; /* best guess about the data type: binary or text */ - uLong adler; /* adler32 value of the uncompressed data */ - uLong reserved; /* reserved for future use */ -} z_stream; - -typedef z_stream FAR *z_streamp; - -/* - gzip header information passed to and from zlib routines. See RFC 1952 - for more details on the meanings of these fields. -*/ -typedef struct gz_header_s { - int text; /* true if compressed data believed to be text */ - uLong time; /* modification time */ - int xflags; /* extra flags (not used when writing a gzip file) */ - int os; /* operating system */ - Bytef *extra; /* pointer to extra field or Z_NULL if none */ - uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ - uInt extra_max; /* space at extra (only when reading header) */ - Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ - uInt name_max; /* space at name (only when reading header) */ - Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ - uInt comm_max; /* space at comment (only when reading header) */ - int hcrc; /* true if there was or will be a header crc */ - int done; /* true when done reading gzip header (not used - when writing a gzip file) */ -} gz_header; - -typedef gz_header FAR *gz_headerp; - -/* - The application must update next_in and avail_in when avail_in has - dropped to zero. It must update next_out and avail_out when avail_out - has dropped to zero. The application must initialize zalloc, zfree and - opaque before calling the init function. All other fields are set by the - compression library and must not be updated by the application. - - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value. - - zalloc must return Z_NULL if there is not enough memory for the object. - If zlib is used in a multi-threaded application, zalloc and zfree must be - thread safe. - - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this - if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, - pointers returned by zalloc for objects of exactly 65536 bytes *must* - have their offset normalized to zero. The default allocation function - provided by this library ensures this (see zutil.c). To reduce memory - requirements and avoid any allocation of 64K objects, at the expense of - compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). - - The fields total_in and total_out can be used for statistics or - progress reports. After compression, total_in holds the total size of - the uncompressed data and may be saved for use in the decompressor - (particularly if the decompressor wants to decompress everything in - a single step). -*/ - - /* constants */ - -#define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ -#define Z_SYNC_FLUSH 2 -#define Z_FULL_FLUSH 3 -#define Z_FINISH 4 -#define Z_BLOCK 5 -/* Allowed flush values; see deflate() and inflate() below for details */ - -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_NEED_DICT 2 -#define Z_ERRNO (-1) -#define Z_STREAM_ERROR (-2) -#define Z_DATA_ERROR (-3) -#define Z_MEM_ERROR (-4) -#define Z_BUF_ERROR (-5) -#define Z_VERSION_ERROR (-6) -/* Return codes for the compression/decompression functions. Negative - * values are errors, positive values are used for special but normal events. - */ - -#define Z_NO_COMPRESSION 0 -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 -#define Z_DEFAULT_COMPRESSION (-1) -/* compression levels */ - -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 -#define Z_RLE 3 -#define Z_FIXED 4 -#define Z_DEFAULT_STRATEGY 0 -/* compression strategy; see deflateInit2() below for details */ - -#define Z_BINARY 0 -#define Z_TEXT 1 -#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ -#define Z_UNKNOWN 2 -/* Possible values of the data_type field (though see inflate()) */ - -#define Z_DEFLATED 8 -/* The deflate compression method (the only one supported in this version) */ - -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ - -#define zlib_version zlibVersion() -/* for compatibility with versions < 1.0.2 */ - - /* basic functions */ - -ZEXTERN const char * ZEXPORT zlibVersion OF((void)); -/* The application can compare zlibVersion and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is - not compatible with the zlib.h header file used by the application. - This check is automatically made by deflateInit and inflateInit. - */ - -/* -ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); - - Initializes the internal stream state for compression. The fields - zalloc, zfree and opaque must be initialized before by the caller. - If zalloc and zfree are set to Z_NULL, deflateInit updates them to - use default allocation functions. - - The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: - 1 gives best speed, 9 gives best compression, 0 gives no compression at - all (the input data is simply copied a block at a time). - Z_DEFAULT_COMPRESSION requests a default compromise between speed and - compression (currently equivalent to level 6). - - deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if level is not a valid compression level, - Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible - with the version assumed by the caller (ZLIB_VERSION). - msg is set to null if there is no error message. deflateInit does not - perform any compression: this will be done by deflate(). -*/ - - -ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); -/* - deflate compresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce some - output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. deflate performs one or both of the - following actions: - - - Compress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in and avail_in are updated and - processing will resume at this point for the next call of deflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. This action is forced if the parameter flush is non zero. - Forcing flush frequently degrades the compression ratio, so this parameter - should be set only when necessary (in interactive applications). - Some output may be provided even if flush is not set. - - Before the call of deflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating avail_in or avail_out accordingly; avail_out - should never be zero before the call. The application can consume the - compressed output when it wants, for example when the output buffer is full - (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK - and with zero avail_out, it must be called again after making room in the - output buffer because there might be more output pending. - - Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to - decide how much data to accumualte before producing output, in order to - maximize compression. - - If the parameter flush is set to Z_SYNC_FLUSH, all pending output is - flushed to the output buffer and the output is aligned on a byte boundary, so - that the decompressor can get all input data available so far. (In particular - avail_in is zero after the call if enough output space has been provided - before the call.) Flushing may degrade compression for some compression - algorithms and so it should be used only when necessary. - - If flush is set to Z_FULL_FLUSH, all output is flushed as with - Z_SYNC_FLUSH, and the compression state is reset so that decompression can - restart from this point if previous compressed data has been damaged or if - random access is desired. Using Z_FULL_FLUSH too often can seriously degrade - compression. - - If deflate returns with avail_out == 0, this function must be called again - with the same value of the flush parameter and more output space (updated - avail_out), until the flush is complete (deflate returns with non-zero - avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that - avail_out is greater than six to avoid repeated flush markers due to - avail_out == 0 on return. - - If the parameter flush is set to Z_FINISH, pending input is processed, - pending output is flushed and deflate returns with Z_STREAM_END if there - was enough output space; if deflate returns with Z_OK, this function must be - called again with Z_FINISH and more output space (updated avail_out) but no - more input data, until it returns with Z_STREAM_END or an error. After - deflate has returned Z_STREAM_END, the only possible operations on the - stream are deflateReset or deflateEnd. - - Z_FINISH can be used immediately after deflateInit if all the compression - is to be done in a single step. In this case, avail_out must be at least - the value returned by deflateBound (see below). If deflate does not return - Z_STREAM_END, then it must be called again as described above. - - deflate() sets strm->adler to the adler32 checksum of all input read - so far (that is, total_in bytes). - - deflate() may update strm->data_type if it can make a good guess about - the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered - binary. This field is only for information purposes and does not affect - the compression algorithm in any manner. - - deflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if all input has been - consumed and all output has been produced (only when flush is set to - Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example - if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible - (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not - fatal, and deflate() can be called again with more input and more output - space to continue compressing. -*/ - - -ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the - stream state was inconsistent, Z_DATA_ERROR if the stream was freed - prematurely (some input or output was discarded). In the error case, - msg may be set but then points to a static string (which must not be - deallocated). -*/ - - -/* -ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); - - Initializes the internal stream state for decompression. The fields - next_in, avail_in, zalloc, zfree and opaque must be initialized before by - the caller. If next_in is not Z_NULL and avail_in is large enough (the exact - value depends on the compression method), inflateInit determines the - compression method from the zlib header and allocates all data structures - accordingly; otherwise the allocation will be deferred to the first call of - inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to - use default allocation functions. - - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller. msg is set to null if there is no error - message. inflateInit does not perform any decompression apart from reading - the zlib header if present: this will be done by inflate(). (So next_in and - avail_in may be modified, but next_out and avail_out are unchanged.) -*/ - - -ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); -/* - inflate decompresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce - some output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. inflate performs one or both of the - following actions: - - - Decompress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in is updated and processing - will resume at this point for the next call of inflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() provides as much output as possible, until there - is no more input data or no more space in the output buffer (see below - about the flush parameter). - - Before the call of inflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating the next_* and avail_* values accordingly. - The application can consume the uncompressed output when it wants, for - example when the output buffer is full (avail_out == 0), or after each - call of inflate(). If inflate returns Z_OK and with zero avail_out, it - must be called again after making room in the output buffer because there - might be more output pending. - - The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, - Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much - output as possible to the output buffer. Z_BLOCK requests that inflate() stop - if and when it gets to the next deflate block boundary. When decoding the - zlib or gzip format, this will cause inflate() to return immediately after - the header and before the first block. When doing a raw inflate, inflate() - will go ahead and process the first block, and will return when it gets to - the end of that block, or when it runs out of data. - - The Z_BLOCK option assists in appending to or combining deflate streams. - Also to assist in this, on return inflate() will set strm->data_type to the - number of unused bits in the last byte taken from strm->next_in, plus 64 - if inflate() is currently decoding the last block in the deflate stream, - plus 128 if inflate() returned immediately after decoding an end-of-block - code or decoding the complete header up to just before the first byte of the - deflate stream. The end-of-block will not be indicated until all of the - uncompressed data from that block has been written to strm->next_out. The - number of unused bits may in general be greater than seven, except when - bit 7 of data_type is set, in which case the number of unused bits will be - less than eight. - - inflate() should normally be called until it returns Z_STREAM_END or an - error. However if all decompression is to be performed in a single step - (a single call of inflate), the parameter flush should be set to - Z_FINISH. In this case all pending input is processed and all pending - output is flushed; avail_out must be large enough to hold all the - uncompressed data. (The size of the uncompressed data may have been saved - by the compressor for this purpose.) The next operation on this stream must - be inflateEnd to deallocate the decompression state. The use of Z_FINISH - is never required, but can be used to inform inflate that a faster approach - may be used for the single inflate() call. - - In this implementation, inflate() always flushes as much output as - possible to the output buffer, and always uses the faster approach on the - first call. So the only effect of the flush parameter in this implementation - is on the return value of inflate(), as noted below, or when it returns early - because Z_BLOCK is used. - - If a preset dictionary is needed after this call (see inflateSetDictionary - below), inflate sets strm->adler to the adler32 checksum of the dictionary - chosen by the compressor and returns Z_NEED_DICT; otherwise it sets - strm->adler to the adler32 checksum of all output produced so far (that is, - total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described - below. At the end of the stream, inflate() checks that its computed adler32 - checksum is equal to that saved by the compressor and returns Z_STREAM_END - only if the checksum is correct. - - inflate() will decompress and check either zlib-wrapped or gzip-wrapped - deflate data. The header type is detected automatically. Any information - contained in the gzip header is not retained, so applications that need that - information should instead use raw inflate, see inflateInit2() below, or - inflateBack() and perform their own processing of the gzip header and - trailer. - - inflate() returns Z_OK if some progress has been made (more input processed - or more output produced), Z_STREAM_END if the end of the compressed data has - been reached and all uncompressed output has been produced, Z_NEED_DICT if a - preset dictionary is needed at this point, Z_DATA_ERROR if the input data was - corrupted (input stream not conforming to the zlib format or incorrect check - value), Z_STREAM_ERROR if the stream structure was inconsistent (for example - if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory, - Z_BUF_ERROR if no progress is possible or if there was not enough room in the - output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and - inflate() can be called again with more input and more output space to - continue decompressing. If Z_DATA_ERROR is returned, the application may then - call inflateSync() to look for a good compression block if a partial recovery - of the data is desired. -*/ - - -ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state - was inconsistent. In the error case, msg may be set but then points to a - static string (which must not be deallocated). -*/ - - /* Advanced functions */ - -/* - The following functions are needed only in some special applications. -*/ - -/* -ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, - int level, - int method, - int windowBits, - int memLevel, - int strategy)); - - This is another version of deflateInit with more compression options. The - fields next_in, zalloc, zfree and opaque must be initialized before by - the caller. - - The method parameter is the compression method. It must be Z_DEFLATED in - this version of the library. - - The windowBits parameter is the base two logarithm of the window size - (the size of the history buffer). It should be in the range 8..15 for this - version of the library. Larger values of this parameter result in better - compression at the expense of memory usage. The default value is 15 if - deflateInit is used instead. - - windowBits can also be -8..-15 for raw deflate. In this case, -windowBits - determines the window size. deflate() will then generate raw deflate data - with no zlib header or trailer, and will not compute an adler32 check value. - - windowBits can also be greater than 15 for optional gzip encoding. Add - 16 to windowBits to write a simple gzip header and trailer around the - compressed data instead of a zlib wrapper. The gzip header will have no - file name, no extra data, no comment, no modification time (set to zero), - no header crc, and the operating system will be set to 255 (unknown). If a - gzip stream is being written, strm->adler is a crc32 instead of an adler32. - - The memLevel parameter specifies how much memory should be allocated - for the internal compression state. memLevel=1 uses minimum memory but - is slow and reduces compression ratio; memLevel=9 uses maximum memory - for optimal speed. The default value is 8. See zconf.h for total memory - usage as a function of windowBits and memLevel. - - The strategy parameter is used to tune the compression algorithm. Use the - value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a - filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no - string match), or Z_RLE to limit match distances to one (run-length - encoding). Filtered data consists mostly of small values with a somewhat - random distribution. In this case, the compression algorithm is tuned to - compress them better. The effect of Z_FILTERED is to force more Huffman - coding and less string matching; it is somewhat intermediate between - Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as - Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy - parameter only affects the compression ratio but not the correctness of the - compressed output even if it is not set appropriately. Z_FIXED prevents the - use of dynamic Huffman codes, allowing for a simpler decoder for special - applications. - - deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid - method). msg is set to null if there is no error message. deflateInit2 does - not perform any compression: this will be done by deflate(). -*/ - -ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -/* - Initializes the compression dictionary from the given byte sequence - without producing any compressed output. This function must be called - immediately after deflateInit, deflateInit2 or deflateReset, before any - call of deflate. The compressor and decompressor must use exactly the same - dictionary (see inflateSetDictionary). - - The dictionary should consist of strings (byte sequences) that are likely - to be encountered later in the data to be compressed, with the most commonly - used strings preferably put towards the end of the dictionary. Using a - dictionary is most useful when the data to be compressed is short and can be - predicted with good accuracy; the data can then be compressed better than - with the default empty dictionary. - - Depending on the size of the compression data structures selected by - deflateInit or deflateInit2, a part of the dictionary may in effect be - discarded, for example if the dictionary is larger than the window size in - deflate or deflate2. Thus the strings most likely to be useful should be - put at the end of the dictionary, not at the front. In addition, the - current implementation of deflate will use at most the window size minus - 262 bytes of the provided dictionary. - - Upon return of this function, strm->adler is set to the adler32 value - of the dictionary; the decompressor may later use this value to determine - which dictionary has been used by the compressor. (The adler32 value - applies to the whole dictionary even if only a subset of the dictionary is - actually used by the compressor.) If a raw deflate was requested, then the - adler32 value is not computed and strm->adler is not set. - - deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent (for example if deflate has already been called for this stream - or if the compression method is bsort). deflateSetDictionary does not - perform any compression: this will be done by deflate(). -*/ - -ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when several compression strategies will be - tried, for example when there are several ways of pre-processing the input - data with a filter. The streams that will be discarded should then be freed - by calling deflateEnd. Note that deflateCopy duplicates the internal - compression state which can be quite large, so this strategy is slow and - can consume lots of memory. - - deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being NULL). msg is left unchanged in both source and - destination. -*/ - -ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); -/* - This function is equivalent to deflateEnd followed by deflateInit, - but does not free and reallocate all the internal compression state. - The stream will keep the same compression level and any other attributes - that may have been set by deflateInit2. - - deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -*/ - -ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, - int level, - int strategy)); -/* - Dynamically update the compression level and compression strategy. The - interpretation of level and strategy is as in deflateInit2. This can be - used to switch between compression and straight copy of the input data, or - to switch to a different kind of input data requiring a different - strategy. If the compression level is changed, the input available so far - is compressed with the old level (and may be flushed); the new level will - take effect only at the next call of deflate(). - - Before the call of deflateParams, the stream state must be set as for - a call of deflate(), since the currently available input may have to - be compressed and flushed. In particular, strm->avail_out must be non-zero. - - deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source - stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR - if strm->avail_out was zero. -*/ - -ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, - int good_length, - int max_lazy, - int nice_length, - int max_chain)); -/* - Fine tune deflate's internal compression parameters. This should only be - used by someone who understands the algorithm used by zlib's deflate for - searching for the best matching string, and even then only by the most - fanatic optimizer trying to squeeze out the last compressed bit for their - specific input data. Read the deflate.c source code for the meaning of the - max_lazy, good_length, nice_length, and max_chain parameters. - - deflateTune() can be called after deflateInit() or deflateInit2(), and - returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. - */ - -ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, - uLong sourceLen)); -/* - deflateBound() returns an upper bound on the compressed size after - deflation of sourceLen bytes. It must be called after deflateInit() - or deflateInit2(). This would be used to allocate an output buffer - for deflation in a single pass, and so would be called before deflate(). -*/ - -ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, - int bits, - int value)); -/* - deflatePrime() inserts bits in the deflate output stream. The intent - is that this function is used to start off the deflate output with the - bits leftover from a previous deflate stream when appending to it. As such, - this function can only be used for raw deflate, and must be used before the - first deflate() call after a deflateInit2() or deflateReset(). bits must be - less than or equal to 16, and that many of the least significant bits of - value will be inserted in the output. - - deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, - gz_headerp head)); -/* - deflateSetHeader() provides gzip header information for when a gzip - stream is requested by deflateInit2(). deflateSetHeader() may be called - after deflateInit2() or deflateReset() and before the first call of - deflate(). The text, time, os, extra field, name, and comment information - in the provided gz_header structure are written to the gzip header (xflag is - ignored -- the extra flags are set according to the compression level). The - caller must assure that, if not Z_NULL, name and comment are terminated with - a zero byte, and that if extra is not Z_NULL, that extra_len bytes are - available there. If hcrc is true, a gzip header crc is included. Note that - the current versions of the command-line version of gzip (up through version - 1.3.x) do not support header crc's, and will report that it is a "multi-part - gzip file" and give up. - - If deflateSetHeader is not used, the default gzip header has text false, - the time set to zero, and os set to 255, with no extra, name, or comment - fields. The gzip header is returned to the default state by deflateReset(). - - deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -/* -ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, - int windowBits)); - - This is another version of inflateInit with an extra parameter. The - fields next_in, avail_in, zalloc, zfree and opaque must be initialized - before by the caller. - - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library. The default value is 15 if inflateInit is used - instead. windowBits must be greater than or equal to the windowBits value - provided to deflateInit2() while compressing, or it must be equal to 15 if - deflateInit2() was not used. If a compressed stream with a larger window - size is given as input, inflate() will return with the error code - Z_DATA_ERROR instead of trying to allocate a larger window. - - windowBits can also be -8..-15 for raw inflate. In this case, -windowBits - determines the window size. inflate() will then process raw deflate data, - not looking for a zlib or gzip header, not generating a check value, and not - looking for any check values for comparison at the end of the stream. This - is for use with other formats that use the deflate compressed data format - such as zip. Those formats provide their own check values. If a custom - format is developed using the raw deflate format for compressed data, it is - recommended that a check value such as an adler32 or a crc32 be applied to - the uncompressed data as is done in the zlib, gzip, and zip formats. For - most applications, the zlib format should be used as is. Note that comments - above on the use in deflateInit2() applies to the magnitude of windowBits. - - windowBits can also be greater than 15 for optional gzip decoding. Add - 32 to windowBits to enable zlib and gzip decoding with automatic header - detection, or add 16 to decode only the gzip format (the zlib format will - return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is - a crc32 instead of an adler32. - - inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg - is set to null if there is no error message. inflateInit2 does not perform - any decompression apart from reading the zlib header if present: this will - be done by inflate(). (So next_in and avail_in may be modified, but next_out - and avail_out are unchanged.) -*/ - -ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -/* - Initializes the decompression dictionary from the given uncompressed byte - sequence. This function must be called immediately after a call of inflate, - if that call returned Z_NEED_DICT. The dictionary chosen by the compressor - can be determined from the adler32 value returned by that call of inflate. - The compressor and decompressor must use exactly the same dictionary (see - deflateSetDictionary). For raw inflate, this function can be called - immediately after inflateInit2() or inflateReset() and before any call of - inflate() to set the dictionary. The application must insure that the - dictionary that was used for compression is provided. - - inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the - expected one (incorrect adler32 value). inflateSetDictionary does not - perform any decompression: this will be done by subsequent calls of - inflate(). -*/ - -ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); -/* - Skips invalid compressed data until a full flush point (see above the - description of deflate with Z_FULL_FLUSH) can be found, or until all - available input is skipped. No output is provided. - - inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR - if no more input was provided, Z_DATA_ERROR if no flush point has been found, - or Z_STREAM_ERROR if the stream structure was inconsistent. In the success - case, the application may save the current current value of total_in which - indicates where valid compressed data was found. In the error case, the - application may repeatedly call inflateSync, providing more input each time, - until success or end of the input data. -*/ - -ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when randomly accessing a large stream. The - first pass through the stream can periodically record the inflate state, - allowing restarting inflate at those points when randomly accessing the - stream. - - inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being NULL). msg is left unchanged in both source and - destination. -*/ - -ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); -/* - This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. - The stream will keep attributes that may have been set by inflateInit2. - - inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -*/ - -ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, - int bits, - int value)); -/* - This function inserts bits in the inflate input stream. The intent is - that this function is used to start inflating at a bit position in the - middle of a byte. The provided bits will be used before any bytes are used - from next_in. This function should only be used with raw inflate, and - should be used before the first inflate() call after inflateInit2() or - inflateReset(). bits must be less than or equal to 16, and that many of the - least significant bits of value will be inserted in the input. - - inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, - gz_headerp head)); -/* - inflateGetHeader() requests that gzip header information be stored in the - provided gz_header structure. inflateGetHeader() may be called after - inflateInit2() or inflateReset(), and before the first call of inflate(). - As inflate() processes the gzip stream, head->done is zero until the header - is completed, at which time head->done is set to one. If a zlib stream is - being decoded, then head->done is set to -1 to indicate that there will be - no gzip header information forthcoming. Note that Z_BLOCK can be used to - force inflate() to return immediately after header processing is complete - and before any actual data is decompressed. - - The text, time, xflags, and os fields are filled in with the gzip header - contents. hcrc is set to true if there is a header CRC. (The header CRC - was valid if done is set to one.) If extra is not Z_NULL, then extra_max - contains the maximum number of bytes to write to extra. Once done is true, - extra_len contains the actual extra field length, and extra contains the - extra field, or that field truncated if extra_max is less than extra_len. - If name is not Z_NULL, then up to name_max characters are written there, - terminated with a zero unless the length is greater than name_max. If - comment is not Z_NULL, then up to comm_max characters are written there, - terminated with a zero unless the length is greater than comm_max. When - any of extra, name, or comment are not Z_NULL and the respective field is - not present in the header, then that field is set to Z_NULL to signal its - absence. This allows the use of deflateSetHeader() with the returned - structure to duplicate the header. However if those fields are set to - allocated memory, then the application will need to save those pointers - elsewhere so that they can be eventually freed. - - If inflateGetHeader is not used, then the header information is simply - discarded. The header is always checked for validity, including the header - CRC if present. inflateReset() will reset the process to discard the header - information. The application would need to call inflateGetHeader() again to - retrieve the header from the next gzip stream. - - inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -/* -ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, - unsigned char FAR *window)); - - Initialize the internal stream state for decompression using inflateBack() - calls. The fields zalloc, zfree and opaque in strm must be initialized - before the call. If zalloc and zfree are Z_NULL, then the default library- - derived memory allocation routines are used. windowBits is the base two - logarithm of the window size, in the range 8..15. window is a caller - supplied buffer of that size. Except for special applications where it is - assured that deflate was used with small window sizes, windowBits must be 15 - and a 32K byte window must be supplied to be able to decompress general - deflate streams. - - See inflateBack() for the usage of these routines. - - inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of - the paramaters are invalid, Z_MEM_ERROR if the internal state could not - be allocated, or Z_VERSION_ERROR if the version of the library does not - match the version of the header file. -*/ - -typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); -typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); - -ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, - in_func in, void FAR *in_desc, - out_func out, void FAR *out_desc)); -/* - inflateBack() does a raw inflate with a single call using a call-back - interface for input and output. This is more efficient than inflate() for - file i/o applications in that it avoids copying between the output and the - sliding window by simply making the window itself the output buffer. This - function trusts the application to not change the output buffer passed by - the output function, at least until inflateBack() returns. - - inflateBackInit() must be called first to allocate the internal state - and to initialize the state with the user-provided window buffer. - inflateBack() may then be used multiple times to inflate a complete, raw - deflate stream with each call. inflateBackEnd() is then called to free - the allocated state. - - A raw deflate stream is one with no zlib or gzip header or trailer. - This routine would normally be used in a utility that reads zip or gzip - files and writes out uncompressed files. The utility would decode the - header and process the trailer on its own, hence this routine expects - only the raw deflate stream to decompress. This is different from the - normal behavior of inflate(), which expects either a zlib or gzip header and - trailer around the deflate stream. - - inflateBack() uses two subroutines supplied by the caller that are then - called by inflateBack() for input and output. inflateBack() calls those - routines until it reads a complete deflate stream and writes out all of the - uncompressed data, or until it encounters an error. The function's - parameters and return types are defined above in the in_func and out_func - typedefs. inflateBack() will call in(in_desc, &buf) which should return the - number of bytes of provided input, and a pointer to that input in buf. If - there is no input available, in() must return zero--buf is ignored in that - case--and inflateBack() will return a buffer error. inflateBack() will call - out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() - should return zero on success, or non-zero on failure. If out() returns - non-zero, inflateBack() will return with an error. Neither in() nor out() - are permitted to change the contents of the window provided to - inflateBackInit(), which is also the buffer that out() uses to write from. - The length written by out() will be at most the window size. Any non-zero - amount of input may be provided by in(). - - For convenience, inflateBack() can be provided input on the first call by - setting strm->next_in and strm->avail_in. If that input is exhausted, then - in() will be called. Therefore strm->next_in must be initialized before - calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called - immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in - must also be initialized, and then if strm->avail_in is not zero, input will - initially be taken from strm->next_in[0 .. strm->avail_in - 1]. - - The in_desc and out_desc parameters of inflateBack() is passed as the - first parameter of in() and out() respectively when they are called. These - descriptors can be optionally used to pass any information that the caller- - supplied in() and out() functions need to do their job. - - On return, inflateBack() will set strm->next_in and strm->avail_in to - pass back any unused input that was provided by the last in() call. The - return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR - if in() or out() returned an error, Z_DATA_ERROR if there was a format - error in the deflate stream (in which case strm->msg is set to indicate the - nature of the error), or Z_STREAM_ERROR if the stream was not properly - initialized. In the case of Z_BUF_ERROR, an input or output error can be - distinguished using strm->next_in which will be Z_NULL only if in() returned - an error. If strm->next is not Z_NULL, then the Z_BUF_ERROR was due to - out() returning non-zero. (in() will always be called before out(), so - strm->next_in is assured to be defined if out() returns non-zero.) Note - that inflateBack() cannot return Z_OK. -*/ - -ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); -/* - All memory allocated by inflateBackInit() is freed. - - inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream - state was inconsistent. -*/ - -ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); -/* Return flags indicating compile-time options. - - Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: - 1.0: size of uInt - 3.2: size of uLong - 5.4: size of voidpf (pointer) - 7.6: size of z_off_t - - Compiler, assembler, and debug options: - 8: DEBUG - 9: ASMV or ASMINF -- use ASM code - 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention - 11: 0 (reserved) - - One-time table building (smaller code, but not thread-safe if true): - 12: BUILDFIXED -- build static block decoding tables when needed - 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed - 14,15: 0 (reserved) - - Library content (indicates missing functionality): - 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking - deflate code when not needed) - 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect - and decode gzip streams (to avoid linking crc code) - 18-19: 0 (reserved) - - Operation variations (changes in library functionality): - 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate - 21: FASTEST -- deflate algorithm with only one, lowest compression level - 22,23: 0 (reserved) - - The sprintf variant used by gzprintf (zero is best): - 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format - 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! - 26: 0 = returns value, 1 = void -- 1 means inferred string length returned - - Remainder: - 27-31: 0 (reserved) - */ - - - /* utility functions */ - -/* - The following utility functions are implemented on top of the - basic stream-oriented functions. To simplify the interface, some - default options are assumed (compression level and memory usage, - standard memory allocation functions). The source code of these - utility functions can easily be modified if you need special options. -*/ - -ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be at least the value returned - by compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed buffer. - This function can be used to compress a whole file at once if the - input file is mmap'ed. - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. -*/ - -ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen, - int level)); -/* - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed buffer. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ - -ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); -/* - compressBound() returns an upper bound on the compressed size after - compress() or compress2() on sourceLen bytes. It would be used before - a compress() or compress2() call to allocate the destination buffer. -*/ - -ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be large enough to hold the - entire uncompressed data. (The size of the uncompressed data must have - been saved previously by the compressor and transmitted to the decompressor - by some mechanism outside the scope of this compression library.) - Upon exit, destLen is the actual size of the compressed buffer. - This function can be used to decompress a whole file at once if the - input file is mmap'ed. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. -*/ - - -typedef voidp gzFile; - -ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); -/* - Opens a gzip (.gz) file for reading or writing. The mode parameter - is as in fopen ("rb" or "wb") but can also include a compression level - ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for - Huffman only compression as in "wb1h", or 'R' for run-length encoding - as in "wb1R". (See the description of deflateInit2 for more information - about the strategy parameter.) - - gzopen can be used to read a file which is not in gzip format; in this - case gzread will directly read from the file without decompression. - - gzopen returns NULL if the file could not be opened or if there was - insufficient memory to allocate the (de)compression state; errno - can be checked to distinguish the two cases (if errno is zero, the - zlib error is Z_MEM_ERROR). */ - -ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); -/* - gzdopen() associates a gzFile with the file descriptor fd. File - descriptors are obtained from calls like open, dup, creat, pipe or - fileno (in the file has been previously opened with fopen). - The mode parameter is as in gzopen. - The next call of gzclose on the returned gzFile will also close the - file descriptor fd, just like fclose(fdopen(fd), mode) closes the file - descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). - gzdopen returns NULL if there was insufficient memory to allocate - the (de)compression state. -*/ - -ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); -/* - Dynamically update the compression level or strategy. See the description - of deflateInit2 for the meaning of these parameters. - gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not - opened for writing. -*/ - -ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); -/* - Reads the given number of uncompressed bytes from the compressed file. - If the input file was not in gzip format, gzread copies the given number - of bytes into the buffer. - gzread returns the number of uncompressed bytes actually read (0 for - end of file, -1 for error). */ - -ZEXTERN int ZEXPORT gzwrite OF((gzFile file, - voidpc buf, unsigned len)); -/* - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of uncompressed bytes actually written - (0 in case of error). -*/ - -ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); -/* - Converts, formats, and writes the args to the compressed file under - control of the format string, as in fprintf. gzprintf returns the number of - uncompressed bytes actually written (0 in case of error). The number of - uncompressed bytes written is limited to 4095. The caller should assure that - this limit is not exceeded. If it is exceeded, then gzprintf() will return - return an error (0) with nothing written. In this case, there may also be a - buffer overflow with unpredictable consequences, which is possible only if - zlib was compiled with the insecure functions sprintf() or vsprintf() - because the secure snprintf() or vsnprintf() functions were not available. -*/ - -ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); -/* - Writes the given null-terminated string to the compressed file, excluding - the terminating null character. - gzputs returns the number of characters written, or -1 in case of error. -*/ - -ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); -/* - Reads bytes from the compressed file until len-1 characters are read, or - a newline character is read and transferred to buf, or an end-of-file - condition is encountered. The string is then terminated with a null - character. - gzgets returns buf, or Z_NULL in case of error. -*/ - -ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); -/* - Writes c, converted to an unsigned char, into the compressed file. - gzputc returns the value that was written, or -1 in case of error. -*/ - -ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); -/* - Reads one byte from the compressed file. gzgetc returns this byte - or -1 in case of end of file or error. -*/ - -ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); -/* - Push one character back onto the stream to be read again later. - Only one character of push-back is allowed. gzungetc() returns the - character pushed, or -1 on failure. gzungetc() will fail if a - character has been pushed but not read yet, or if c is -1. The pushed - character will be discarded if the stream is repositioned with gzseek() - or gzrewind(). -*/ - -ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); -/* - Flushes all pending output into the compressed file. The parameter - flush is as in the deflate() function. The return value is the zlib - error number (see function gzerror below). gzflush returns Z_OK if - the flush parameter is Z_FINISH and all output could be flushed. - gzflush should be called only when strictly necessary because it can - degrade compression. -*/ - -ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, - z_off_t offset, int whence)); -/* - Sets the starting position for the next gzread or gzwrite on the - given compressed file. The offset represents a number of bytes in the - uncompressed data stream. The whence parameter is defined as in lseek(2); - the value SEEK_END is not supported. - If the file is opened for reading, this function is emulated but can be - extremely slow. If the file is opened for writing, only forward seeks are - supported; gzseek then compresses a sequence of zeroes up to the new - starting position. - - gzseek returns the resulting offset location as measured in bytes from - the beginning of the uncompressed stream, or -1 in case of error, in - particular if the file is opened for writing and the new starting position - would be before the current position. -*/ - -ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); -/* - Rewinds the given file. This function is supported only for reading. - - gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) -*/ - -ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); -/* - Returns the starting position for the next gzread or gzwrite on the - given compressed file. This position represents a number of bytes in the - uncompressed data stream. - - gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) -*/ - -ZEXTERN int ZEXPORT gzeof OF((gzFile file)); -/* - Returns 1 when EOF has previously been detected reading the given - input stream, otherwise zero. -*/ - -ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); -/* - Returns 1 if file is being read directly without decompression, otherwise - zero. -*/ - -ZEXTERN int ZEXPORT gzclose OF((gzFile file)); -/* - Flushes all pending output if necessary, closes the compressed file - and deallocates all the (de)compression state. The return value is the zlib - error number (see function gzerror below). -*/ - -ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); -/* - Returns the error message for the last error which occurred on the - given compressed file. errnum is set to zlib error number. If an - error occurred in the file system and not in the compression library, - errnum is set to Z_ERRNO and the application may consult errno - to get the exact error code. -*/ - -ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); -/* - Clears the error and end-of-file flags for file. This is analogous to the - clearerr() function in stdio. This is useful for continuing to read a gzip - file that is being written concurrently. -*/ - - /* checksum functions */ - -/* - These functions are not related to compression but are exported - anyway because they might be useful in applications using the - compression library. -*/ - -ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); -/* - Update a running Adler-32 checksum with the bytes buf[0..len-1] and - return the updated checksum. If buf is NULL, this function returns - the required initial value for the checksum. - An Adler-32 checksum is almost as reliable as a CRC32 but can be computed - much faster. Usage example: - - uLong adler = adler32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - adler = adler32(adler, buffer, length); - } - if (adler != original_adler) error(); -*/ - -ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, - z_off_t len2)); -/* - Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 - and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for - each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of - seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. -*/ - -ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); -/* - Update a running CRC-32 with the bytes buf[0..len-1] and return the - updated CRC-32. If buf is NULL, this function returns the required initial - value for the for the crc. Pre- and post-conditioning (one's complement) is - performed within this function so it shouldn't be done by the application. - Usage example: - - uLong crc = crc32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - crc = crc32(crc, buffer, length); - } - if (crc != original_crc) error(); -*/ - -ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); - -/* - Combine two CRC-32 check values into one. For two sequences of bytes, - seq1 and seq2 with lengths len1 and len2, CRC-32 check values were - calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 - check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and - len2. -*/ - - - /* various hacks, don't look :) */ - -/* deflateInit and inflateInit are macros to allow checking the zlib version - * and the compiler's view of z_stream: - */ -ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, - int windowBits, int memLevel, - int strategy, const char *version, - int stream_size)); -ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, - unsigned char FAR *window, - const char *version, - int stream_size)); -#define deflateInit(strm, level) \ - deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit(strm) \ - inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) -#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ - deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ - (strategy), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit2(strm, windowBits) \ - inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) -#define inflateBackInit(strm, windowBits, window) \ - inflateBackInit_((strm), (windowBits), (window), \ - ZLIB_VERSION, sizeof(z_stream)) - - -#if !defined(_ZUTIL_H) && !defined(NO_DUMMY_DECL) - struct internal_state {int dummy;}; /* hack for buggy compilers */ -#endif - -ZEXTERN const char * ZEXPORT zError OF((int)); -ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z)); -ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); - -#ifdef __cplusplus -} -#endif - -#endif /* _ZLIB_H */ diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod.c b/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod.c index a251331ac910..1f195cc6e07b 100644 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod.c +++ b/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod.c @@ -25,10 +25,48 @@ */ #include +#include +#include +#include #include -#include "zlib.h" -#include "zutil.h" +#include +#include + +struct zchdr { + uint_t zch_magic; + uint_t zch_size; +}; + +#define ZCH_MAGIC 0x3cc13cc1 + +/*ARGSUSED*/ +static void * +zfs_zcalloc(void *opaque, uint_t items, uint_t size) +{ + size_t nbytes = sizeof (struct zchdr) + items * size; + struct zchdr *z = kobj_zalloc(nbytes, KM_NOWAIT|KM_TMP); + + if (z == NULL) + return (NULL); + + z->zch_magic = ZCH_MAGIC; + z->zch_size = nbytes; + + return (z + 1); +} + +/*ARGSUSED*/ +static void +zfs_zcfree(void *opaque, void *ptr) +{ + struct zchdr *z = ((struct zchdr *)ptr) - 1; + + if (z->zch_magic != ZCH_MAGIC) + panic("zcfree region corrupt: hdr=%p ptr=%p", (void *)z, ptr); + + kobj_free(z, z->zch_size); +} /* * Uncompress the buffer 'src' into the buffer 'dst'. The caller must store @@ -47,6 +85,8 @@ z_uncompress(void *dst, size_t *dstlen, const void *src, size_t srclen) zs.avail_in = srclen; zs.next_out = dst; zs.avail_out = *dstlen; + zs.zalloc = zfs_zcalloc; + zs.zfree = zfs_zcfree; /* * Call inflateInit2() specifying a window size of DEF_WBITS @@ -78,6 +118,8 @@ z_compress_level(void *dst, size_t *dstlen, const void *src, size_t srclen, zs.avail_in = srclen; zs.next_out = dst; zs.avail_out = *dstlen; + zs.zalloc = zfs_zcalloc; + zs.zfree = zfs_zcfree; if ((err = deflateInit(&zs, level)) != Z_OK) return (err); diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c b/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c deleted file mode 100644 index 0542712c37f5..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * CDDL HEADER START - * - * The contents of this file are subject to the terms of the - * Common Development and Distribution License (the "License"). - * You may not use this file except in compliance with the License. - * - * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - * or http://www.opensolaris.org/os/licensing. - * See the License for the specific language governing permissions - * and limitations under the License. - * - * When distributing Covered Code, include this CDDL HEADER in each - * file and include the License file at usr/src/OPENSOLARIS.LICENSE. - * If applicable, add the following below this CDDL HEADER, with the - * fields enclosed by brackets "[]" replaced with your own identifying - * information: Portions Copyright [yyyy] [name of copyright owner] - * - * CDDL HEADER END - */ - -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include -#include -#include - -struct zchdr { - uint_t zch_magic; - uint_t zch_size; -}; - -#define ZCH_MAGIC 0x3cc13cc1 - -/*ARGSUSED*/ -void * -zcalloc(void *opaque, uint_t items, uint_t size) -{ - size_t nbytes = sizeof (struct zchdr) + items * size; - struct zchdr *z = kobj_zalloc(nbytes, KM_NOWAIT|KM_TMP); - - if (z == NULL) - return (NULL); - - z->zch_magic = ZCH_MAGIC; - z->zch_size = nbytes; - - return (z + 1); -} - -/*ARGSUSED*/ -void -zcfree(void *opaque, void *ptr) -{ - struct zchdr *z = ((struct zchdr *)ptr) - 1; - - if (z->zch_magic != ZCH_MAGIC) - panic("zcfree region corrupt: hdr=%p ptr=%p", (void *)z, ptr); - - kobj_free(z, z->zch_size); -} - -void -zmemcpy(void *dest, const void *source, uint_t len) -{ - bcopy(source, dest, len); -} - -int -zmemcmp(const void *s1, const void *s2, uint_t len) -{ - return (bcmp(s1, s2, len)); -} - -void -zmemzero(void *dest, uint_t len) -{ - bzero(dest, len); -} diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.c b/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.c deleted file mode 100644 index 7d46e30b3edf..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -/* zutil.c -- target dependent utility functions for the compression library - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#pragma ident "%Z%%M% %I% %E% SMI" - -#include "zutil.h" - -#ifndef NO_DUMMY_DECL -struct internal_state {int dummy;}; /* for buggy compilers */ -#endif - -const char * const z_errmsg[10] = { -"need dictionary", /* Z_NEED_DICT 2 */ -"stream end", /* Z_STREAM_END 1 */ -"", /* Z_OK 0 */ -"file error", /* Z_ERRNO (-1) */ -"stream error", /* Z_STREAM_ERROR (-2) */ -"data error", /* Z_DATA_ERROR (-3) */ -"insufficient memory", /* Z_MEM_ERROR (-4) */ -"buffer error", /* Z_BUF_ERROR (-5) */ -"incompatible version",/* Z_VERSION_ERROR (-6) */ -""}; - - -const char * ZEXPORT zlibVersion() -{ - return ZLIB_VERSION; -} - -uLong ZEXPORT zlibCompileFlags() -{ - uLong flags; - - flags = 0; - switch (sizeof(uInt)) { - case 2: break; - case 4: flags += 1; break; - case 8: flags += 2; break; - default: flags += 3; - } - switch (sizeof(uLong)) { - case 2: break; - case 4: flags += 1 << 2; break; - case 8: flags += 2 << 2; break; - default: flags += 3 << 2; - } - switch (sizeof(voidpf)) { - case 2: break; - case 4: flags += 1 << 4; break; - case 8: flags += 2 << 4; break; - default: flags += 3 << 4; - } - switch (sizeof(z_off_t)) { - case 2: break; - case 4: flags += 1 << 6; break; - case 8: flags += 2 << 6; break; - default: flags += 3 << 6; - } -#ifdef DEBUG - flags += 1 << 8; -#endif -#if defined(ASMV) || defined(ASMINF) - flags += 1 << 9; -#endif -#ifdef ZLIB_WINAPI - flags += 1 << 10; -#endif -#ifdef BUILDFIXED - flags += 1 << 12; -#endif -#ifdef DYNAMIC_CRC_TABLE - flags += 1 << 13; -#endif -#ifdef NO_GZCOMPRESS - flags += 1L << 16; -#endif -#ifdef NO_GZIP - flags += 1L << 17; -#endif -#ifdef PKZIP_BUG_WORKAROUND - flags += 1L << 20; -#endif -#ifdef FASTEST - flags += 1L << 21; -#endif -#ifdef STDC -# ifdef NO_vsnprintf - flags += 1L << 25; -# ifdef HAS_vsprintf_void - flags += 1L << 26; -# endif -# else -# ifdef HAS_vsnprintf_void - flags += 1L << 26; -# endif -# endif -#else - flags += 1L << 24; -# ifdef NO_snprintf - flags += 1L << 25; -# ifdef HAS_sprintf_void - flags += 1L << 26; -# endif -# else -# ifdef HAS_snprintf_void - flags += 1L << 26; -# endif -# endif -#endif - return flags; -} - -#ifdef DEBUG - -# ifndef verbose -# define verbose 0 -# endif -int z_verbose = verbose; - -void z_error (m) - char *m; -{ - fprintf(stderr, "%s\n", m); - exit(1); -} -#endif - -/* exported to allow conversion of error code to string for compress() and - * uncompress() - */ -const char * ZEXPORT zError(err) - int err; -{ - return ERR_MSG(err); -} - -#if defined(_WIN32_WCE) - /* The Microsoft C Run-Time Library for Windows CE doesn't have - * errno. We define it as a global variable to simplify porting. - * Its value is always 0 and should not be used. - */ - int errno = 0; -#endif - -#define HAVE_MEMCPY -#ifndef HAVE_MEMCPY - -void zmemcpy(dest, source, len) - Bytef* dest; - const Bytef* source; - uInt len; -{ - if (len == 0) return; - do { - *dest++ = *source++; /* ??? to be unrolled */ - } while (--len != 0); -} - -int zmemcmp(s1, s2, len) - const Bytef* s1; - const Bytef* s2; - uInt len; -{ - uInt j; - - for (j = 0; j < len; j++) { - if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1; - } - return 0; -} - -void zmemzero(dest, len) - Bytef* dest; - uInt len; -{ - if (len == 0) return; - do { - *dest++ = 0; /* ??? to be unrolled */ - } while (--len != 0); -} -#endif - - -#ifdef SYS16BIT - -#ifdef __TURBOC__ -/* Turbo C in 16-bit mode */ - -# define MY_ZCALLOC - -/* Turbo C malloc() does not allow dynamic allocation of 64K bytes - * and farmalloc(64K) returns a pointer with an offset of 8, so we - * must fix the pointer. Warning: the pointer must be put back to its - * original form in order to free it, use zcfree(). - */ - -#define MAX_PTR 10 -/* 10*64K = 640K */ - -local int next_ptr = 0; - -typedef struct ptr_table_s { - voidpf org_ptr; - voidpf new_ptr; -} ptr_table; - -local ptr_table table[MAX_PTR]; -/* This table is used to remember the original form of pointers - * to large buffers (64K). Such pointers are normalized with a zero offset. - * Since MSDOS is not a preemptive multitasking OS, this table is not - * protected from concurrent access. This hack doesn't work anyway on - * a protected system like OS/2. Use Microsoft C instead. - */ - -voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) -{ - voidpf buf = opaque; /* just to make some compilers happy */ - ulg bsize = (ulg)items*size; - - /* If we allocate less than 65520 bytes, we assume that farmalloc - * will return a usable pointer which doesn't have to be normalized. - */ - if (bsize < 65520L) { - buf = farmalloc(bsize); - if (*(ush*)&buf != 0) return buf; - } else { - buf = farmalloc(bsize + 16L); - } - if (buf == NULL || next_ptr >= MAX_PTR) return NULL; - table[next_ptr].org_ptr = buf; - - /* Normalize the pointer to seg:0 */ - *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4; - *(ush*)&buf = 0; - table[next_ptr++].new_ptr = buf; - return buf; -} - -void zcfree (voidpf opaque, voidpf ptr) -{ - int n; - if (*(ush*)&ptr != 0) { /* object < 64K */ - farfree(ptr); - return; - } - /* Find the original pointer */ - for (n = 0; n < next_ptr; n++) { - if (ptr != table[n].new_ptr) continue; - - farfree(table[n].org_ptr); - while (++n < next_ptr) { - table[n-1] = table[n]; - } - next_ptr--; - return; - } - ptr = opaque; /* just to make some compilers happy */ - Assert(0, "zcfree: ptr not found"); -} - -#endif /* __TURBOC__ */ - - -#ifdef M_I86 -/* Microsoft C in 16-bit mode */ - -# define MY_ZCALLOC - -#if (!defined(_MSC_VER) || (_MSC_VER <= 600)) -# define _halloc halloc -# define _hfree hfree -#endif - -voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) -{ - if (opaque) opaque = 0; /* to make compiler happy */ - return _halloc((long)items, size); -} - -void zcfree (voidpf opaque, voidpf ptr) -{ - if (opaque) opaque = 0; /* to make compiler happy */ - _hfree(ptr); -} - -#endif /* M_I86 */ - -#endif /* SYS16BIT */ - - -#ifndef MY_ZCALLOC /* Any system without a special alloc function */ - -#ifndef STDC -extern voidp malloc OF((uInt size)); -extern voidp calloc OF((uInt items, uInt size)); -extern void free OF((voidpf ptr)); -#endif - -voidpf zcalloc (opaque, items, size) - voidpf opaque; - unsigned items; - unsigned size; -{ - if (opaque) items += size - size; /* make compiler happy */ - return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : - (voidpf)calloc(items, size); -} - -void zcfree (opaque, ptr) - voidpf opaque; - voidpf ptr; -{ - free(ptr); - if (opaque) return; /* make compiler happy */ -} - -#endif /* MY_ZCALLOC */ diff --git a/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.h b/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.h deleted file mode 100644 index 1d02c1d09783..000000000000 --- a/sys/cddl/contrib/opensolaris/uts/common/zmod/zutil.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -/* zutil.h -- internal interface and configuration of the compression library - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -#ifndef _ZUTIL_H -#define _ZUTIL_H - -#pragma ident "%Z%%M% %I% %E% SMI" - -#define ZLIB_INTERNAL -#include "zlib.h" - -#ifdef STDC -# ifndef _WIN32_WCE -# include -# endif -# include -# include -#endif -#ifdef NO_ERRNO_H -# ifdef _WIN32_WCE - /* The Microsoft C Run-Time Library for Windows CE doesn't have - * errno. We define it as a global variable to simplify porting. - * Its value is always 0 and should not be used. We rename it to - * avoid conflict with other libraries that use the same workaround. - */ -# define errno z_errno -# endif - extern int errno; -#else -# ifndef _WIN32_WCE -# include -# endif -#endif - -#ifndef local -# define local static -#endif -/* compile with -Dlocal if your debugger can't find static symbols */ - -typedef unsigned char uch; -typedef uch FAR uchf; -typedef unsigned short ush; -typedef ush FAR ushf; -typedef unsigned long ulg; - -extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ -/* (size given to avoid silly warnings with Visual C++) */ - -#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] - -#define ERR_RETURN(strm,err) \ - return (strm->msg = (char*)ERR_MSG(err), (err)) -/* To be used only when the state is known to be valid */ - - /* common constants */ - -#ifndef DEF_WBITS -# define DEF_WBITS MAX_WBITS -#endif -/* default windowBits for decompression. MAX_WBITS is for compression only */ - -#if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 -#else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL -#endif -/* default memLevel */ - -#define STORED_BLOCK 0 -#define STATIC_TREES 1 -#define DYN_TREES 2 -/* The three kinds of block type */ - -#define MIN_MATCH 3 -#define MAX_MATCH 258 -/* The minimum and maximum match lengths */ - -#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ - - /* target dependencies */ - -#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32)) -# define OS_CODE 0x00 -# if defined(__TURBOC__) || defined(__BORLANDC__) -# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) - /* Allow compilation with ANSI keywords only enabled */ - void _Cdecl farfree( void *block ); - void *_Cdecl farmalloc( unsigned long nbytes ); -# else -# include -# endif -# else /* MSC or DJGPP */ -# include -# endif -#endif - -#ifdef AMIGA -# define OS_CODE 0x01 -#endif - -#if defined(VAXC) || defined(VMS) -# define OS_CODE 0x02 -# define F_OPEN(name, mode) \ - fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") -#endif - -#if defined(ATARI) || defined(atarist) -# define OS_CODE 0x05 -#endif - -#ifdef OS2 -# define OS_CODE 0x06 -# ifdef M_I86 - #include -# endif -#endif - -#if defined(MACOS) || defined(TARGET_OS_MAC) -# define OS_CODE 0x07 -# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os -# include /* for fdopen */ -# else -# ifndef fdopen -# define fdopen(fd,mode) NULL /* No fdopen() */ -# endif -# endif -#endif - -#ifdef TOPS20 -# define OS_CODE 0x0a -#endif - -#ifdef WIN32 -# ifndef __CYGWIN__ /* Cygwin is Unix, not Win32 */ -# define OS_CODE 0x0b -# endif -#endif - -#ifdef __50SERIES /* Prime/PRIMOS */ -# define OS_CODE 0x0f -#endif - -#if defined(_BEOS_) || defined(RISCOS) -# define fdopen(fd,mode) NULL /* No fdopen() */ -#endif - -#if (defined(_MSC_VER) && (_MSC_VER > 600)) -# if defined(_WIN32_WCE) -# define fdopen(fd,mode) NULL /* No fdopen() */ -# ifndef _PTRDIFF_T_DEFINED - typedef int ptrdiff_t; -# define _PTRDIFF_T_DEFINED -# endif -# else -# define fdopen(fd,type) _fdopen(fd,type) -# endif -#endif - - /* common defaults */ - -#ifndef OS_CODE -# define OS_CODE 0x03 /* assume Unix */ -#endif - -#ifndef F_OPEN -# define F_OPEN(name, mode) fopen((name), (mode)) -#endif - - /* functions */ - -#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif -#if defined(__CYGWIN__) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif -#ifndef HAVE_VSNPRINTF -# ifdef MSDOS - /* vsnprintf may exist on some MS-DOS compilers (DJGPP?), - but for now we just assume it doesn't. */ -# define NO_vsnprintf -# endif -# ifdef __TURBOC__ -# define NO_vsnprintf -# endif -# ifdef WIN32 - /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */ -# if !defined(vsnprintf) && !defined(NO_vsnprintf) -# define vsnprintf _vsnprintf -# endif -# endif -# ifdef __SASC -# define NO_vsnprintf -# endif -#endif -#ifdef VMS -# define NO_vsnprintf -#endif - -#if defined(pyr) -# define NO_MEMCPY -#endif -#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) - /* Use our own functions for small and medium model with MSC <= 5.0. - * You may have to use the same strategy for Borland C (untested). - * The __SC__ check is for Symantec. - */ -# define NO_MEMCPY -#endif -#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) -# define HAVE_MEMCPY -#endif -#ifdef HAVE_MEMCPY -# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ -# define zmemcpy _fmemcpy -# define zmemcmp _fmemcmp -# define zmemzero(dest, len) _fmemset(dest, 0, len) -# else -# define zmemcpy memcpy -# define zmemcmp memcmp -# define zmemzero(dest, len) memset(dest, 0, len) -# endif -#else - extern void zmemcpy OF((void* dest, const void* source, uInt len)); - extern int zmemcmp OF((const void* s1, const void* s2, uInt len)); - extern void zmemzero OF((void* dest, uInt len)); -#endif - -/* Diagnostic functions */ -#ifdef DEBUG -# include - extern int z_verbose; - extern void z_error OF((char *m)); -# define Assert(cond,msg) {if(!(cond)) z_error(msg);} -# define Trace(x) {if (z_verbose>=0) fprintf x ;} -# define Tracev(x) {if (z_verbose>0) fprintf x ;} -# define Tracevv(x) {if (z_verbose>1) fprintf x ;} -# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} -# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - - -voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); -void zcfree OF((voidpf opaque, voidpf ptr)); - -#define ZALLOC(strm, items, size) \ - (*((strm)->zalloc))((strm)->opaque, (items), (size)) -#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) -#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} - -#endif /* _ZUTIL_H */ diff --git a/sys/conf/NOTES b/sys/conf/NOTES index dfa5ff68d802..d9180700e5c1 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -2981,4 +2981,6 @@ device spigen # Generic access to SPI devices from userland. # Enable legacy /dev/spigenN name aliases for /dev/spigenX.Y devices. options SPIGEN_LEGACY_CDEVNAME # legacy device names for spigen +# Compression supports. +device zlib # gzip/zlib compression/decompression library device xz # xz_embedded LZMA de-compression library diff --git a/sys/conf/files b/sys/conf/files index aa492112567c..780676362156 100644 --- a/sys/conf/files +++ b/sys/conf/files @@ -273,16 +273,7 @@ cddl/contrib/opensolaris/uts/common/os/callb.c optional zfs compile-with "${Z cddl/contrib/opensolaris/uts/common/os/fm.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/os/list.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/os/nvpair_alloc_system.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/adler32.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/deflate.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/inffast.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/inflate.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/inftrees.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/opensolaris_crc32.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/trees.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/zmod.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/zmod_subr.c optional zfs compile-with "${ZFS_C}" -cddl/contrib/opensolaris/uts/common/zmod/zutil.c optional zfs compile-with "${ZFS_C}" +cddl/contrib/opensolaris/uts/common/zmod/zmod.c optional zfs compile-with "${ZFS_C} ${ZLIB_CFLAGS}" # zfs lua support cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lapi.c optional zfs compile-with "${ZFS_C}" cddl/contrib/opensolaris/uts/common/fs/zfs/lua/lauxlib.c optional zfs compile-with "${ZFS_C}" @@ -4005,6 +3996,36 @@ libkern/strvalid.c standard libkern/timingsafe_bcmp.c standard libkern/zlib.c optional crypto | geom_uzip | ipsec | \ ipsec_support | mxge | netgraph_deflate | ddb_ctf | gzio +contrib/zlib/adler32.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +contrib/zlib/crc32.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C} -Wno-cast-qual" +contrib/zlib/deflate.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C} -Wno-cast-qual" +contrib/zlib/inffast.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +contrib/zlib/inflate.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +contrib/zlib/inftrees.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +contrib/zlib/trees.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +contrib/zlib/zutil.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +dev/zlib/zlib_mod.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" +dev/zlib/zcalloc.c optional crypto | geom_uzip | ipsec | \ + ipsec_support | mxge | ddb_ctf | gzio | zfs | zlib \ + compile-with "${ZLIB_C}" net/altq/altq_cbq.c optional altq net/altq/altq_codel.c optional altq net/altq/altq_hfsc.c optional altq @@ -4756,7 +4777,8 @@ opencrypto/crypto.c optional crypto | ipsec | ipsec_support opencrypto/cryptodev.c optional cryptodev opencrypto/cryptodev_if.m optional crypto | ipsec | ipsec_support opencrypto/cryptosoft.c optional crypto | ipsec | ipsec_support -opencrypto/cryptodeflate.c optional crypto | ipsec | ipsec_support +opencrypto/cryptodeflate.c optional crypto | ipsec | ipsec_support \ + compile-with "${ZLIB_C}" opencrypto/gmac.c optional crypto | ipsec | ipsec_support opencrypto/gfmult.c optional crypto | ipsec | ipsec_support opencrypto/rmd160.c optional crypto | ipsec | ipsec_support diff --git a/sys/conf/kern.pre.mk b/sys/conf/kern.pre.mk index 8f6d2c5fb60f..9c6cf221a82f 100644 --- a/sys/conf/kern.pre.mk +++ b/sys/conf/kern.pre.mk @@ -173,6 +173,10 @@ NORMAL_FW= uudecode -o ${.TARGET} ${.ALLSRC} NORMAL_FWO= ${LD} -b binary --no-warn-mismatch -d -warn-common -r \ -m ${LD_EMULATION} -o ${.TARGET} ${.ALLSRC:M*.fw} +# for zlib in the kernel +ZLIB_CFLAGS+= -DZ_SOLO +ZLIB_C= ${CC} -c ${ZLIB_CFLAGS} ${CFLAGS} ${.IMPSRC} + # for ZSTD in the kernel (include zstd/lib/freebsd before other CFLAGS) ZSTD_C= ${CC} -c -DZSTD_HEAPMODE=1 -I$S/contrib/zstd/lib/freebsd ${CFLAGS} -I$S/contrib/zstd/lib -I$S/contrib/zstd/lib/common ${WERROR} -Wno-inline -Wno-missing-prototypes ${PROF} -U__BMI__ ${.IMPSRC} diff --git a/sys/conf/kmod.mk b/sys/conf/kmod.mk index 13e899758083..c7857d7126d4 100644 --- a/sys/conf/kmod.mk +++ b/sys/conf/kmod.mk @@ -104,6 +104,8 @@ __KLD_SHARED=yes __KLD_SHARED=no .endif +ZLIB_CFLAGS+= -DZ_SOLO + .if !empty(CFLAGS:M-O[23s]) && empty(CFLAGS:M-fno-strict-aliasing) CFLAGS+= -fno-strict-aliasing .endif diff --git a/sys/contrib/zlib/deflate.c b/sys/contrib/zlib/deflate.c index 7f2c8a2a2a64..7809eee81c11 100644 --- a/sys/contrib/zlib/deflate.c +++ b/sys/contrib/zlib/deflate.c @@ -189,9 +189,10 @@ local const config configuration_table[10] = { * Initialize the hash table (avoiding 64K overflow for 16 bit systems). * prev[] will be initialized on the fly. */ -#define CLEAR_HASH(s) \ +#define CLEAR_HASH(s) do { \ s->head[s->hash_size-1] = NIL; \ - zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); + zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); \ + } while (0) /* =========================================================================== * Slide the hash table when sliding the window down (could be avoided with 32 @@ -1622,8 +1623,10 @@ local void fill_window(s) /* Maximum stored block length in deflate format (not including header). */ #define MAX_STORED 65535 +#if !defined(MIN) /* Minimum of a and b. */ #define MIN(a, b) ((a) > (b) ? (b) : (a)) +#endif /* =========================================================================== * Copy without compression as much as possible from the input stream, return diff --git a/sys/contrib/zlib/zconf.h b/sys/contrib/zlib/zconf.h index 0654395f3fca..6734ca61512f 100644 --- a/sys/contrib/zlib/zconf.h +++ b/sys/contrib/zlib/zconf.h @@ -503,6 +503,9 @@ typedef uLong FAR uLongf; /* * This is hard-configured for FreeBSD. */ +#ifdef Z_SOLO +# include /* for off_t */ +#endif #define z_off_t off_t #ifndef _FILE_OFFSET_BITS #define _FILE_OFFSET_BITS 64 diff --git a/sys/contrib/zlib/zutil.h b/sys/contrib/zlib/zutil.h index b079ea6a80f5..c6197540e74f 100644 --- a/sys/contrib/zlib/zutil.h +++ b/sys/contrib/zlib/zutil.h @@ -30,7 +30,10 @@ #endif #ifdef Z_SOLO +#ifndef _PTRDIFF_T_DECLARED typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */ +#define _PTRDIFF_T_DECLARED +#endif #endif #ifndef local diff --git a/sys/dev/zlib/zcalloc.c b/sys/dev/zlib/zcalloc.c new file mode 100644 index 000000000000..198633d5de39 --- /dev/null +++ b/sys/dev/zlib/zcalloc.c @@ -0,0 +1,32 @@ +/* + * This file is in the public domain. + * $FreeBSD$ + */ + +#include +#include +#include +#include + +MALLOC_DEFINE(M_ZLIB, "zlib", "ZLIB Compressor"); + +void * +zcalloc_waitok(void *nil, u_int items, u_int size) +{ + + return mallocarray(items, size, M_ZLIB, M_WAITOK); +} + +void * +zcalloc_nowait(void *nil, u_int items, u_int size) +{ + + return mallocarray(items, size, M_ZLIB, M_NOWAIT); +} + +void +zcfree(void *nil, void *ptr) +{ + + free(ptr, M_ZLIB); +} diff --git a/sys/dev/zlib/zcalloc.h b/sys/dev/zlib/zcalloc.h new file mode 100644 index 000000000000..f3e33b596346 --- /dev/null +++ b/sys/dev/zlib/zcalloc.h @@ -0,0 +1,13 @@ +/* + * This file is in the public domain. + * $FreeBSD$ + */ + +#ifndef _DEV_ZLIB_ZCALLOC_ +#define _DEV_ZLIB_ZCALLOC_ + +void * zcalloc_waitok(void *nil, u_int items, u_int size); +void * zcalloc_nowait(void *nil, u_int items, u_int size); +void zcfree(void *nil, void *ptr); + +#endif diff --git a/sys/dev/zlib/zlib_mod.c b/sys/dev/zlib/zlib_mod.c new file mode 100644 index 000000000000..58f40214d3ce --- /dev/null +++ b/sys/dev/zlib/zlib_mod.c @@ -0,0 +1,53 @@ +/*- + * SPDX-License-Identifier: BSD-2-Clause + * + * Copyright (c) 2019 The FreeBSD Foundation + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#include +#include +#include +#include + +static int +zlib_modevent(module_t mod, int type, void *unused) +{ + switch (type) { + case MOD_LOAD: + return 0; + case MOD_UNLOAD: + return 0; + } + return EINVAL; +} + +static moduledata_t zlib_mod = { + "zlib", + zlib_modevent, + 0 +}; +DECLARE_MODULE(zlib, zlib_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST); +MODULE_VERSION(zlib, 1); diff --git a/sys/libkern/zlib.c b/sys/libkern/zlib.c index 7b1fe99387c3..3ccb90e00b59 100644 --- a/sys/libkern/zlib.c +++ b/sys/libkern/zlib.c @@ -25,14 +25,14 @@ #define MY_ZCALLOC #if defined(__FreeBSD__) && defined(_KERNEL) -#define _tr_init _zlib104_tr_init -#define _tr_align _zlib104_tr_align -#define _tr_tally _zlib104_tr_tally -#define _tr_flush_block _zlib104_tr_flush_block -#define _tr_stored_block _zlib104_tr_stored_block -#define inflate_fast _zlib104_inflate_fast -#define inflate _zlib104_inflate -#define zlibVersion _zlib104_Version +#define _tr_init zlib104_tr_init +#define _tr_align zlib104_tr_align +#define _tr_tally zlib104_tr_tally +#define _tr_flush_block zlib104_tr_flush_block +#define _tr_stored_block zlib104_tr_stored_block +#define inflate_fast zlib104_inflate_fast +#define inflate zlib104_inflate +#define zlibVersion zlib104_Version #endif @@ -65,8 +65,6 @@ #include #include #include -#include -#include # define HAVE_MEMCPY #else @@ -602,7 +600,6 @@ void _tr_stored_type_only OF((deflate_state *)); /* #include "deflate.h" */ -char deflate_copyright[] = " deflate 1.0.4 Copyright 1995-1996 Jean-loup Gailly "; /* If you use the zlib library in a product, an acknowledgment is welcome in the documentation of your product. If for some reason you cannot @@ -4109,7 +4106,6 @@ int inflate_packet_flush(s) /* #include "zutil.h" */ /* #include "inftrees.h" */ -char inflate_copyright[] = " inflate 1.0.4 Copyright 1995-1996 Mark Adler "; /* If you use the zlib library in a product, an acknowledgment is welcome in the documentation of your product. If for some reason you cannot @@ -5390,25 +5386,3 @@ uLong adler32(adler, buf, len) return (s2 << 16) | s1; } /* --- adler32.c */ - -#ifdef _KERNEL -static int -zlib_modevent(module_t mod, int type, void *unused) -{ - switch (type) { - case MOD_LOAD: - return 0; - case MOD_UNLOAD: - return 0; - } - return EINVAL; -} - -static moduledata_t zlib_mod = { - "zlib", - zlib_modevent, - 0 -}; -DECLARE_MODULE(zlib, zlib_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST); -MODULE_VERSION(zlib, 1); -#endif /* _KERNEL */ diff --git a/sys/modules/crypto/Makefile b/sys/modules/crypto/Makefile index 09c5d710e985..15e46057597f 100644 --- a/sys/modules/crypto/Makefile +++ b/sys/modules/crypto/Makefile @@ -23,6 +23,7 @@ KMOD = crypto SRCS = crypto.c cryptodev_if.c SRCS += criov.c cryptosoft.c xform.c SRCS += cast.c cryptodeflate.c rmd160.c rijndael-alg-fst.c rijndael-api.c rijndael-api-fst.c +CFLAGS.cryptodeflate.c += ${ZLIB_CFLAGS} SRCS += skipjack.c bf_enc.c bf_ecb.c bf_skey.c SRCS += camellia.c camellia-api.c SRCS += des_ecb.c des_enc.c des_setkey.c diff --git a/sys/modules/zfs/Makefile b/sys/modules/zfs/Makefile index 011c07045eb7..7a66499a71bd 100644 --- a/sys/modules/zfs/Makefile +++ b/sys/modules/zfs/Makefile @@ -55,16 +55,8 @@ SRCS+= list.c SRCS+= nvpair_alloc_system.c .PATH: ${SUNW}/uts/common/zmod -SRCS+= adler32.c -SRCS+= opensolaris_crc32.c -SRCS+= deflate.c -SRCS+= inffast.c -SRCS+= inflate.c -SRCS+= inftrees.c -SRCS+= trees.c SRCS+= zmod.c -SRCS+= zmod_subr.c -SRCS+= zutil.c +CFLAGS.zmod.c+= ${ZLIB_CFLAGS} .PATH: ${SYSDIR}/crypto/sha2 SRCS+= sha256c.c sha512c.c diff --git a/sys/modules/zlib/Makefile b/sys/modules/zlib/Makefile index 26a023c536f3..ae6554564839 100644 --- a/sys/modules/zlib/Makefile +++ b/sys/modules/zlib/Makefile @@ -1,8 +1,28 @@ # $FreeBSD$ .PATH: ${SRCTOP}/sys/libkern +.PATH: ${SRCTOP}/sys/dev/zlib +.PATH: ${SRCTOP}/sys/contrib/zlib KMOD= zlib +# legacy zlib - 1.0.4 SRCS= zlib.c +# newer zlib - 1.2.11 +SRCS+= zcalloc.c +SRCS+= zlib_mod.c +SRCS+= adler32.c +SRCS+= crc32.c +SRCS+= deflate.c +SRCS+= inffast.c +SRCS+= inflate.c +SRCS+= inftrees.c +SRCS+= trees.c +SRCS+= zutil.c + +CFLAGS+=${ZLIB_CFLAGS} + +CWARNFLAGS.compress.c+=-Wno-cast-qual # compress:49 +CWARNFLAGS.deflate.c+=-Wno-cast-qual # deflate.c:415 +CWARNFLAGS.uncompr.c+=-Wno-cast-qual # uncompr:49 .include diff --git a/sys/opencrypto/cryptodeflate.c b/sys/opencrypto/cryptodeflate.c index 25ec46db28dc..8dd438b6860f 100644 --- a/sys/opencrypto/cryptodeflate.c +++ b/sys/opencrypto/cryptodeflate.c @@ -29,7 +29,7 @@ /* * This file contains a wrapper around the deflate algo compression - * functions using the zlib library (see libkern/zlib.c and sys/zlib.h}) + * functions using the zlib library (see sys/contrib/zlib) */ #include @@ -42,7 +42,7 @@ __FBSDID("$FreeBSD$"); #include #include #include -#include +#include #include #include @@ -60,6 +60,22 @@ SDT_PROBE_DEFINE2(opencrypto, deflate, deflate_global, return, int window_inflate = -1 * MAX_WBITS; int window_deflate = -12; +static void * +crypto_zalloc(void *nil, u_int type, u_int size) +{ + void *ptr; + + ptr = malloc(type *size, M_CRYPTO_DATA, M_NOWAIT); + return ptr; +} + +static void +crypto_zfree(void *nil, void *ptr) +{ + + free(ptr, M_CRYPTO_DATA); +} + /* * This function takes a block of data and (de)compress it using the deflate * algorithm @@ -113,8 +129,8 @@ deflate_global(data, size, decomp, out) bufp->size = size * i; bzero(&zbuf, sizeof(z_stream)); - zbuf.zalloc = z_alloc; - zbuf.zfree = z_free; + zbuf.zalloc = crypto_zalloc; + zbuf.zfree = crypto_zfree; zbuf.opaque = Z_NULL; zbuf.next_in = data; /* Data that is going to be processed. */ zbuf.avail_in = size; /* Total length of data to be processed. */ @@ -167,8 +183,8 @@ deflate_global(data, size, decomp, out) zbuf.avail_out = bufp->size; } else { /* Unexpect result. */ - SDT_PROBE6(opencrypto, deflate, deflate_global, bad, - decomp, error, __LINE__, + SDT_PROBE6(opencrypto, deflate, deflate_global, + bad, decomp, error, __LINE__, zbuf.avail_in, zbuf.avail_out, zbuf.total_out); goto bad; } @@ -226,21 +242,3 @@ deflate_global(data, size, decomp, out) *out = NULL; return 0; } - -void * -z_alloc(nil, type, size) - void *nil; - u_int type, size; -{ - void *ptr; - - ptr = malloc(type *size, M_CRYPTO_DATA, M_NOWAIT); - return ptr; -} - -void -z_free(nil, ptr) - void *nil, *ptr; -{ - free(ptr, M_CRYPTO_DATA); -} diff --git a/sys/opencrypto/deflate.h b/sys/opencrypto/deflate.h index d31a3bf27e5b..1be746d79200 100644 --- a/sys/opencrypto/deflate.h +++ b/sys/opencrypto/deflate.h @@ -36,16 +36,12 @@ #ifndef _CRYPTO_DEFLATE_H_ #define _CRYPTO_DEFLATE_H_ -#include - #define Z_METHOD 8 #define Z_MEMLEVEL 8 #define MINCOMP 2 /* won't be used, but must be defined */ #define ZBUF 10 u_int32_t deflate_global(u_int8_t *, u_int32_t, int, u_int8_t **); -void *z_alloc(void *, u_int, u_int); -void z_free(void *, void *); /* * We are going to use a combined allocation to hold the metadata diff --git a/sys/sys/zlib.h b/sys/sys/zlib.h index 89dad6abdecc..c8ab504e4ad3 100644 --- a/sys/sys/zlib.h +++ b/sys/sys/zlib.h @@ -72,40 +72,40 @@ extern "C" { * If you *really* need a unique prefix for all types and library functions, * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. */ -#ifdef Z_PREFIX -# define deflateInit_ z_deflateInit_ -# define deflate z_deflate -# define deflateEnd z_deflateEnd -# define inflateInit_ z_inflateInit_ -# define inflate z_inflate -# define inflateEnd z_inflateEnd -# define deflateInit2_ z_deflateInit2_ -# define deflateSetDictionary z_deflateSetDictionary -# define deflateCopy z_deflateCopy -# define deflateReset z_deflateReset -# define deflateParams z_deflateParams -# define inflateInit2_ z_inflateInit2_ -# define inflateSetDictionary z_inflateSetDictionary -# define inflateSync z_inflateSync -# define inflateReset z_inflateReset -# define compress z_compress -# define uncompress z_uncompress -# define adler32 z_adler32 +#ifdef _KERNEL +# define deflateInit_ zlib104_deflateInit_ +# define deflate zlib104_deflate +# define deflateEnd zlib104_deflateEnd +# define inflateInit_ zlib104_inflateInit_ +# define inflate zlib104_inflate +# define inflateEnd zlib104_inflateEnd +# define deflateInit2_ zlib104_deflateInit2_ +# define deflateSetDictionary zlib104_deflateSetDictionary +# define deflateCopy zlib104_deflateCopy +# define deflateReset zlib104_deflateReset +# define deflateParams zlib104_deflateParams +# define inflateInit2_ zlib104_inflateInit2_ +# define inflateSetDictionary zlib104_inflateSetDictionary +# define inflateSync zlib104_inflateSync +# define inflateReset zlib104_inflateReset +# define compress zlib104_compress +# define uncompress zlib104_uncompress +# define adler32 zlib104_adler32 #if 0 -# define crc32 z_crc32 -# define get_crc_table z_get_crc_table +# define crc32 zlib104_crc32 +# define get_crc_table zlib104_get_crc_table #endif -# define Byte z_Byte -# define uInt z_uInt -# define uLong z_uLong -# define Bytef z_Bytef -# define charf z_charf -# define intf z_intf -# define uIntf z_uIntf -# define uLongf z_uLongf -# define voidpf z_voidpf -# define voidp z_voidp +# define Byte zlib104_Byte +# define uInt zlib104_uInt +# define uLong zlib104_uLong +# define Bytef zlib104_Bytef +# define charf zlib104_charf +# define intf zlib104_intf +# define uIntf zlib104_uIntf +# define uLongf zlib104_uLongf +# define voidpf zlib104_voidpf +# define voidp zlib104_voidp #endif #if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32) @@ -513,7 +513,7 @@ extern int EXPORT inflateInit OF((z_streamp strm)); */ #if defined(__FreeBSD__) && defined(_KERNEL) -#define inflate _zlib104_inflate /* FreeBSD already has an inflate :-( */ +#define inflate zlib104_inflate /* FreeBSD already has an inflate :-( */ #endif extern int EXPORT inflate OF((z_streamp strm, int flush));