diff --git a/release/picobsd/net/PICOBSD b/release/picobsd/net/PICOBSD deleted file mode 100644 index 6129174d6b15..000000000000 --- a/release/picobsd/net/PICOBSD +++ /dev/null @@ -1,86 +0,0 @@ -# -# $FreeBSD$ -# -#Line starting with #PicoBSD contains PicoBSD build parameters -#marker def_sz init MFS_inodes floppy_inodes -#PicoBSD 2200 init 4096 32768 -options MD_ROOT_SIZE=2200 # same as def_sz - -hints "PICOBSD.hints" -machine i386 -#cpu I386_CPU -cpu I486_CPU -cpu I586_CPU -cpu I686_CPU -ident PICOBSD -maxusers 10 - -options MATH_EMULATE #Support for x87 emulation -options INET #InterNETworking -options FFS #Berkeley Fast Filesystem -options NFSCLIENT #Network Filesystem -options MD_ROOT #MFS as root -options MSDOSFS #MSDOS Filesystem -options CD9660 #ISO 9660 Filesystem -options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] -options IPFIREWALL -options IPFIREWALL_DEFAULT_TO_ACCEPT -options IPDIVERT -options COMPAT_OLDISA #Use ISA shims and glue for old drivers -#options DEVFS -# Support for bridging and bandwidth limiting -#options DUMMYNET -#options BRIDGE - -device isa -device pci - -device fdc - -device ata -device atadisk -device atapicd -options ATA_STATIC_ID #Static device numbering - -# atkbdc0 controls both the keyboard and the PS/2 mouse -device atkbdc 1 -device atkbd - -device vga - -# syscons is the default console driver, resembling an SCO console -device sc 1 - -device npx - -device sio - -device ppc -device ppbus -device lpt -device plip -device ppi - -# -# The following Ethernet NICs are all PCI devices. -# -device miibus -device dc -device fxp - -# Order is important here due to intrusive probes, do *not* alphabetize -# this list of network interfaces until the probes have been fixed. -# Right now it appears that the ie0 must be probed before ep0. See -# revision 1.20 of this file. - -device ed -device ep -device ie - -device loop -device ether -device tun 2 -#device vn -device pty 16 -device md -#device gzip # Exec gzipped a.out's diff --git a/release/picobsd/net/PICOBSD.hints b/release/picobsd/net/PICOBSD.hints deleted file mode 100644 index 676ea781caa3..000000000000 --- a/release/picobsd/net/PICOBSD.hints +++ /dev/null @@ -1,65 +0,0 @@ -# $FreeBSD$ -hint.fdc.0.at="isa" -hint.fdc.0.port="0x3F0" -hint.fdc.0.irq="6" -hint.fdc.0.drq="2" -hint.fd.0.at="fdc0" -hint.fd.0.drive="0" -hint.ata.0.at="isa" -hint.ata.0.port="0x1F0" -hint.ata.0.irq="14" -hint.ata.1.at="isa" -hint.ata.1.port="0x170" -hint.ata.1.irq="15" -hint.atkbdc.0.at="isa" -hint.atkbdc.0.port="0x060" -hint.atkbd.0.at="atkbdc" -hint.atkbd.0.irq="1" -hint.vga.0.at="isa" -hint.sc.0.at="isa" -hint.npx.0.at="nexus" -hint.npx.0.port="0x0F0" -hint.npx.0.irq="13" -hint.sio.0.at="isa" -hint.sio.0.port="0x3F8" -hint.sio.0.flags="0x10" -hint.sio.0.irq="4" -hint.sio.1.at="isa" -hint.sio.1.port="0x2F8" -hint.sio.1.irq="3" -hint.sio.2.at="isa" -hint.sio.2.disabled="1" -hint.sio.2.port="0x3E8" -hint.sio.2.irq="5" -hint.sio.3.at="isa" -hint.sio.3.disabled="1" -hint.sio.3.port="0x2E8" -hint.sio.3.irq="9" -hint.ppc.0.at="isa" -hint.ppc.0.flags="0x40" -hint.ppc.0.irq="7" -hint.lpt.0.at="ppbus" -hint.plip.0.at="ppbus" -hint.ppi.0.at="ppbus" -hint.ed.0.at="isa" -hint.ed.0.port="0x280" -hint.ed.0.irq="5" -hint.ed.0.maddr="0xd8000" -hint.ed.1.at="isa" -hint.ed.1.port="0x300" -hint.ed.1.irq="10" -hint.ed.1.maddr="0xd0000" -hint.ep.0.at="isa" -hint.ep.0.port="0x300" -hint.ep.0.irq="10" -hint.ep.1.at="isa" -hint.ep.1.port="0x280" -hint.ep.1.irq="5" -hint.ie.0.at="isa" -hint.ie.0.port="0x300" -hint.ie.0.irq="5" -hint.ie.0.maddr="0xd0000" -hint.ie.1.at="isa" -hint.ie.1.port="0x360" -hint.ie.1.irq="7" -hint.ie.1.maddr="0xd0000" diff --git a/release/picobsd/net/config b/release/picobsd/net/config deleted file mode 100644 index 224cd64b67c7..000000000000 --- a/release/picobsd/net/config +++ /dev/null @@ -1 +0,0 @@ -o_no_devfs="" # we have devfs diff --git a/release/picobsd/net/crunch.conf b/release/picobsd/net/crunch.conf deleted file mode 100644 index e7716ecd3308..000000000000 --- a/release/picobsd/net/crunch.conf +++ /dev/null @@ -1,53 +0,0 @@ -# -# $FreeBSD$ -# -# NOTE: the string "/usr/src" will be automatically replaced with the -# correct value set in 'build' script - you should change it there - -# Default build options. -buildopts -DNOPAM -DRELEASE_CRUNCH -DNOSECURE -DNOCRYPT -DNONETGRAPH -DNOIPSEC - -# sources for ns & vm & login and other picobsd-specific programs -srcdirs /usr/src/release/picobsd/tinyware -# other sources -srcdirs /usr/src/bin -srcdirs /usr/src/sbin/i386 -srcdirs /usr/src/sbin -srcdirs /usr/src/usr.bin -srcdirs /usr/src/gnu/usr.bin -srcdirs /usr/src/usr.sbin -srcdirs /usr/src/libexec - -progs sh test echo hostname ln login getty stty -progs inetd telnetd w msg kget reboot -progs init ifconfig df sps ns vm cat -progs cp rm mknod chmod chown mkdir ls syslogd -progs sysctl route pwd_mkdb dev_mkdb -progs mount mount_msdosfs umount -progs kill mount_std natd - -progs pwd telnet less -ln less more -progs passwd date -progs mount_cd9660 mount_nfs ping traceroute routed ipfw - -progs ppp -special ppp buildopts -DNOKLDLOAD -DNOINET6 -DNONAT -DNOATM -DNOSUID -DHAVE_DES -DNORADIUS -DNOI4B - -progs minigzip -ln minigzip gzip -ln mount_cd9660 cd9660 -ln mount_nfs nfs -ln test [ -ln sh -sh -ln mount_msdosfs msdos -ln mount_std procfs -ln mount_std mount_procfs -ln sps ps -ln msg dmesg -ln ns netstat -ln chown chgrp - -libs -lncurses -lmytinfo -lipx -lz -lpcap -lalias -lwrap -libs -ledit -lutil -lmd -lcrypt -lmp -lgmp -lm -lkvm -libs -lgnuregex diff --git a/release/picobsd/net/floppy.tree/boot.config b/release/picobsd/net/floppy.tree/boot.config deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/release/picobsd/net/floppy.tree/etc/disktab b/release/picobsd/net/floppy.tree/etc/disktab deleted file mode 100644 index 7575ba66e088..000000000000 --- a/release/picobsd/net/floppy.tree/etc/disktab +++ /dev/null @@ -1,87 +0,0 @@ -# -# Floppy formats: -# -# To make a filesystem on a floppy: -# fdformat [-f ] fd[.] -# disklabel -B -r -w fd[.] fd -# newfs fd[.] -# -# with : -# -t 2 - two heads -# -u 9|15|18 - sectors per track -# (using the default value of 1/4096 is not much useful for floppies) -# -l 1 - interleave 1 (for most floppies) -# -i 65536 - bytes of data per i-node -# (the default -i value will render you with a floppy wasting way -# too much space in i-node areas) -# - -fd360:\ - :ty=floppy:se#512:nt#2:rm#300:ns#9:nc#40:\ - :pa#720:oa#0:ba#4096:fa#512:\ - :pb#720:ob#0:bb#4096:fb#512:\ - :pc#720:oc#0:bc#4096:fc#512: - -fd720:\ - :ty=floppy:se#512:nt#2:rm#300:ns#9:nc#80:\ - :pa#1440:oa#0:ba#4096:fa#512:\ - :pb#1440:ob#0:bb#4096:fb#512:\ - :pc#1440:oc#0:bc#4096:fc#512: - -fd1200|floppy5|5in|5.25in High Density Floppy:\ - :ty=floppy:se#512:nt#2:rm#360:ns#15:nc#80:\ - :pa#2400:oa#0:ba#4096:fa#512:\ - :pb#2400:ob#0:bb#4096:fb#512:\ - :pc#2400:oc#0:bc#4096:fc#512: - -fd1440|floppy|floppy3|3in|3.5in High Density Floppy:\ - :ty=floppy:se#512:nt#2:rm#300:ns#18:nc#80:\ - :pa#2880:oa#0:ba#4096:fa#512:\ - :pb#2880:ob#0:bb#4096:fb#512:\ - :pc#2880:oc#0:bc#4096:fc#512: - -fd1024|floppy0|3.5in Special Density Floppy:\ - :ty=floppy:se#512:nt#2:rm#300:ns#16:nc#64:\ - :pa#2048:oa#0:ba#4096:fa#512:\ - :pb#2048:ob#0:bb#4096:fb#512:\ - :pc#2048:oc#0:bc#4096:fc#512: - -# a == root -# b == swap -# c == d == whole disk -# e == /var -# f == scratch -# h == /usr - -cp3100new|Connor Peripherals 100MB IDE, with a different configuration:\ - :dt=ST506:ty=winchester:se#512:nt#8:ns#33:nc#766: \ - :pa#15840:oa#0:ta=4.2BSD:ba#4096:fa#512: \ - :pb#24288:ob#15840:tb=swap: \ - :pc#202224:oc#0: \ - :pd#202224:od#0: \ - :pe#15840:oe#40128:te=4.2BSD:be#4096:fe#512: \ - :pg#15840:og#55968:tg=4.2BSD:bg#4096:fg#512: \ - :ph#130416:oh#71808:th=4.2BSD:bh#4096:fh#512: - -sony650|Sony 650 MB MOD|\ - :ty=removable:dt=SCSI:se#512:nt#1:ns#31:nc#18600:ts#1:rm#4800:\ - :pc#576600:oc#0:\ - :pa#576600:oa#0:ta=4.2BSD:ba#8192:fa#1024: - -mta3230|mo230|IBM MTA-3230 230 Meg 3.5inch Magneto-Optical:\ - :ty=removeable:dt=SCSI:rm#3600:\ - :se#512:nt#64:ns#32:nc#216:sc#2048:su#444384:\ - :pa#444384:oa#0:ba#4096:fa#0:ta=4.2BSD:\ - :pc#444384:oc#0: - -minimum:ty=mfs:se#512:nt#1:rm#300:\ - :ns#2880:nc#1:\ - :pa#2880:oa#0:ba#4096:fa#512:\ - :pc#2880:oc#0:bc#4096:fc#512: - -zip100|zip 100:\ - :ty=removable:se#512:nc#96:nt#64:ns#32:\ - :pa#196608:oa#0:ba#4096:fa#512:\ - :pb#196608:ob#0:bb#4096:fb#512:\ - :pc#196608:oc#0:bc#4096:fc#512: - diff --git a/release/picobsd/net/floppy.tree/etc/fstab b/release/picobsd/net/floppy.tree/etc/fstab deleted file mode 100644 index b4a988fe8d95..000000000000 --- a/release/picobsd/net/floppy.tree/etc/fstab +++ /dev/null @@ -1,5 +0,0 @@ -# $FreeBSD$ -#proc /proc procfs rw 0 0 -#/dev/fd0c /start_floppy ufs rw 1 1 -#/dev/wd0s1 /dos msdosfs rw 0 0 -#/dev/wcd0c /cdrom cd9660 ro,noauto 0 0 diff --git a/release/picobsd/net/floppy.tree/etc/gettytab b/release/picobsd/net/floppy.tree/etc/gettytab deleted file mode 100644 index 90562acf2505..000000000000 --- a/release/picobsd/net/floppy.tree/etc/gettytab +++ /dev/null @@ -1,40 +0,0 @@ -# from: @(#)gettytab 5.14 (Berkeley) 3/27/91 -# -default:\ - :cb:ce:ck:lc:fd#1000:cl:im=\r\nPicoBSD (%h) (%t)\r\n\r\n:sp#1200: - -P|Pc|Pc console:\ - :ht:np:sp#115200: - -# -# Fixed speed entries -2|std.9600|9600-baud:\ - :np:sp#9600: -g|std.19200|19200-baud:\ - :np:sp#19200: -std.38400|38400-baud:\ - :np:sp#38400: -std.57600|57600-baud:\ - :np:sp#57600: -std.115200|115200-baud:\ - :np:sp#115200: - -# -# Entry specifying explicit device settings. See termios(4) and -# /usr/include/termios.h, too. The entry forces the tty into -# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control. -# -# cflags: CLOCAL | HUPCL | CREAD | CS8 -# oflags: OPOST | ONLCR | OXTABS -# iflags: IXOFF | IXON | ICRNL | IGNPAR -# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE -# -# The `0' flags don't have input enabled. The `1' flags don't echo. -# (Echoing is done inside getty itself.) -# -local.9600|CLOCAL tty @ 9600 Bd:\ - :c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\ - :o0#0x00000007:o1#0x00000002:o2#0x00000007:\ - :i0#0x00000704:i1#0x00000000:i2#0x00000704:\ - :l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\ - :sp#9600: diff --git a/release/picobsd/net/floppy.tree/etc/group b/release/picobsd/net/floppy.tree/etc/group deleted file mode 100644 index abbd733f3b0b..000000000000 --- a/release/picobsd/net/floppy.tree/etc/group +++ /dev/null @@ -1,19 +0,0 @@ -wheel:*:0:root,user -daemon:*:1:daemon -kmem:*:2:root -sys:*:3:root -tty:*:4:root -operator:*:5:root -mail:*:6: -bin:*:7: -news:*:8: -man:*:9: -games:*:13: -staff:*:20:root,user -guest:*:31:root -uucp:*:66: -xten:*:67:xten -dialer:*:68: -network:*:69: -nogroup:*:65533: -nobody:*:65534: diff --git a/release/picobsd/net/floppy.tree/etc/host.conf b/release/picobsd/net/floppy.tree/etc/host.conf deleted file mode 100644 index 753112455a69..000000000000 --- a/release/picobsd/net/floppy.tree/etc/host.conf +++ /dev/null @@ -1,3 +0,0 @@ -# $FreeBSD$ -hosts -bind diff --git a/release/picobsd/net/floppy.tree/etc/inetd.conf b/release/picobsd/net/floppy.tree/etc/inetd.conf deleted file mode 100644 index c7c50de341e4..000000000000 --- a/release/picobsd/net/floppy.tree/etc/inetd.conf +++ /dev/null @@ -1,21 +0,0 @@ -# -# Internet server configuration database -# -# @(#)inetd.conf 5.4 (Berkeley) 6/30/90 -# -telnet stream tcp nowait root /usr/libexec/telnetd telnetd -# -# "Small servers" -- used to be standard on, but we're more conservative -# about things due to Internet security concerns. Only turn on what you -# need. -# -#daytime stream tcp nowait root internal -#daytime dgram udp wait root internal -#time stream tcp nowait root internal -#time dgram udp wait root internal -#echo stream tcp nowait root internal -#echo dgram udp wait root internal -#discard stream tcp nowait root internal -#discard dgram udp wait root internal -#chargen stream tcp nowait root internal -#chargen dgram udp wait root internal diff --git a/release/picobsd/net/floppy.tree/etc/login.conf b/release/picobsd/net/floppy.tree/etc/login.conf deleted file mode 100644 index 1f2f02777ddd..000000000000 --- a/release/picobsd/net/floppy.tree/etc/login.conf +++ /dev/null @@ -1,120 +0,0 @@ -# This file controls resource limits, accounting limits and -# default user environment settings. -# -# $FreeBSD$ -# - - -# Authentication methods - -auth-defaults:\ - :auth=passwd: - -auth-root-defaults:\ - :auth-login=passwd:\ - :auth-rlogin=passwd:\ - -auth-ftp-defaults:\ - :auth=passwd: - -# Example defaults -# These settings are used by login(1) by default for classless users -# Note that entries like "cputime" set both "cputime-cur" and "cputime-max" - -default:\ - :cputime=infinity:\ - :datasize-cur=22M:\ - :stacksize-cur=8M:\ - :memorylocked-cur=10M:\ - :memoryuse-cur=30M:\ - :filesize=infinity:\ - :coredumpsize=infinity:\ - :maxproc-cur=64:\ - :openfiles-cur=64:\ - :priority=0:\ - :requirehome@:\ - :umask=022:\ - :tc=auth-defaults: - - -# -# standard - standard user defaults -# -standard:\ - :copyright=/etc/COPYRIGHT:\ - :welcome=/etc/motd:\ - :setenv=MAIL=/var/mail/$,BLOCKSIZE=K,EDITOR=/usr/bin/ee:\ - :path=~/bin /bin /usr/bin:\ - :nologin=/var/run/nologin:\ - :cputime=1h30m:\ - :datasize=8M:\ - :stacksize=2M:\ - :memorylocked=4M:\ - :memoryuse=8M:\ - :filesize=8M:\ - :coredumpsize=8M:\ - :openfiles=24:\ - :maxproc=32:\ - :priority=0:\ - :requirehome:\ - :passwordtime=90d:\ - :umask=002:\ - :ignoretime@:\ - :tc=default: -# -# Staff users - few restrictions and allow login anytime -# -staff:\ - :ignorenologin:\ - :ignoretime:\ - :requirehome@:\ - :accounted@:\ - :path=~/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\ - :umask=022:\ - :tc=standard: - - -# -# root - fallback for root logins -# -root:\ - :path=~/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\ - :cputime=infinity:\ - :datasize=infinity:\ - :stacksize=infinity:\ - :memorylocked=infinity:\ - :memoryuse=infinity:\ - :filesize=infinity:\ - :coredumpsize=infinity:\ - :openfiles=infinity:\ - :maxproc=infinity:\ - :memoryuse-cur=32M:\ - :maxproc-cur=64:\ - :openfiles-cur=1024:\ - :priority=0:\ - :requirehome@:\ - :umask=022:\ - :tc=auth-root-defaults:\ -# -# Settings used by /etc/rc -# -daemon:\ - :coredumpsize@:\ - :coredumpsize-cur=0:\ - :datasize=infinity:\ - :datasize-cur@:\ - :maxproc=512:\ - :maxproc-cur@:\ - :memoryuse-cur=64M:\ - :memorylocked-cur=64M:\ - :openfiles=1024:\ - :openfiles-cur@:\ - :stacksize=16M:\ - :stacksize-cur@:\ - :tc=default: -# -# Polish Users Accounts. Setup proper environment variables. -# -polish:Polish Users Accounts:\ - :lang=pl_pl.ISO-8859-2:\ - :tc=default: diff --git a/release/picobsd/net/floppy.tree/etc/master.passwd b/release/picobsd/net/floppy.tree/etc/master.passwd deleted file mode 100644 index 9d85cdf91b0e..000000000000 --- a/release/picobsd/net/floppy.tree/etc/master.passwd +++ /dev/null @@ -1,7 +0,0 @@ -root:$1$xOOaGnKU$U9QdsCI40XXcCUMBN.7Az.:0:0::0:0:Charlie &:/root:/bin/sh -toor:*:0:0::0:0:Bourne-again Superuser:/root: -daemon:*:1:1::0:0:Owner of many system processes:/root:/nonexistent -operator:*:2:20::0:0:System &:/usr/guest/operator:/bin/csh -bin:*:3:7::0:0:Binaries Commands and Source,,,:/:/nonexistent -nobody:*:65534:65534::0:0:Unprivileged user:/nonexistent:/nonexistent -user:$1$T9q8Coad$WatJttamwr2UAdbfKbWxj.:1002:1002:polish:0:0:user:/home/user:/bin/sh diff --git a/release/picobsd/net/floppy.tree/etc/mfs.rc b/release/picobsd/net/floppy.tree/etc/mfs.rc deleted file mode 100644 index 0ae2d0170eef..000000000000 --- a/release/picobsd/net/floppy.tree/etc/mfs.rc +++ /dev/null @@ -1,35 +0,0 @@ -#!/bin/sh -# $FreeBSD$ -### WARNING !!!!!! ##### -# We remove this file during execution (see EOF). -# Awful things happen if its size is > 1024B - -stty status '^T' - -trap : 2 -trap : 3 - -HOME=/; export HOME -PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin -export PATH - -trap "echo 'Reboot interrupted'; exit 1" 3 - -### Special setup for one floppy PICOBSD ### -echo "" -echo "-------------------------------------------" -echo " Please wait. The system is coming up..." -echo "-------------------------------------------" -echo "" -echo "Reading /etc from startup floppy..." -mount -o rdonly /dev/fd0a /start_floppy -cd /start_floppy/etc -cp -Rp . /etc/ -cd /etc -gzip -d -f *.gz -pwd_mkdb -p ./master.passwd -umount /start_floppy -echo "Ok. (Now you can remove floppy if you like)" -echo "" -. rc -exit 0 diff --git a/release/picobsd/net/floppy.tree/etc/ppp/ppp.conf b/release/picobsd/net/floppy.tree/etc/ppp/ppp.conf deleted file mode 100644 index ed5da5dd72ce..000000000000 --- a/release/picobsd/net/floppy.tree/etc/ppp/ppp.conf +++ /dev/null @@ -1,8 +0,0 @@ -# PPP Sample Configuration File -# Written by Toshiharu OHNO -default: - set device /dev/cuaa1 - set speed 38400 - disable lqr - deny lqr - set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT" diff --git a/release/picobsd/net/floppy.tree/etc/ppp/ppp.deny b/release/picobsd/net/floppy.tree/etc/ppp/ppp.deny deleted file mode 100644 index 51e1e9bd03e3..000000000000 --- a/release/picobsd/net/floppy.tree/etc/ppp/ppp.deny +++ /dev/null @@ -1,15 +0,0 @@ -# list of users disallowed any pppd access via 'system -# password login'. -# read by pppd(8). -root -toor -daemon -operator -bin -games -news -man -ftp -uucp -xten -ingres diff --git a/release/picobsd/net/floppy.tree/etc/ppp/ppp.linkup b/release/picobsd/net/floppy.tree/etc/ppp/ppp.linkup deleted file mode 100644 index 05107c6df855..000000000000 --- a/release/picobsd/net/floppy.tree/etc/ppp/ppp.linkup +++ /dev/null @@ -1,10 +0,0 @@ -# Example of ppp.linkup file -# -iij-demand: - delete ALL - add 0 0 HISADDR -# -# Otherwise, simply add peer as default gateway. -# -MYADDR: - add 0 0 HISADDR diff --git a/release/picobsd/net/floppy.tree/etc/ppp/ppp.secret.sample b/release/picobsd/net/floppy.tree/etc/ppp/ppp.secret.sample deleted file mode 100644 index bfaab7681aa5..000000000000 --- a/release/picobsd/net/floppy.tree/etc/ppp/ppp.secret.sample +++ /dev/null @@ -1,23 +0,0 @@ -################################################## -# -# Example of ppp.secret file -# -# This file is used to authenticate incoming connections. -# You must ``enable'' either PAP or CHAP in your ppp.conf file. -# The peer may then use any of the Authname/Authkey pairs listed. -# If an IP address is given, it will be assigned to the peer. -# -# If an entry exists for your local machine (as given by the -# ``hostname -s'' command), the password specified will be -# required for all server socket connections. Refer to the ppp(8) -# and pppctl(8) man pages for further details. -# -# $FreeBSD$ -# -################################################## - -# Authname Authkey Peer's IP address - -oscar OurSecretKey 192.244.184.34/24 -BigBird X4dWg9327 192.244.184.33/32 -tama localPasswdForControl diff --git a/release/picobsd/net/floppy.tree/etc/profile b/release/picobsd/net/floppy.tree/etc/profile deleted file mode 100644 index babb9333f494..000000000000 --- a/release/picobsd/net/floppy.tree/etc/profile +++ /dev/null @@ -1,3 +0,0 @@ -# System-wide .profile file for sh(1). -BLOCKSIZE=K; export BLOCKSIZE -PATH=/stand:.; export PATH diff --git a/release/picobsd/net/floppy.tree/etc/protocols b/release/picobsd/net/floppy.tree/etc/protocols deleted file mode 100644 index c80be39f693a..000000000000 --- a/release/picobsd/net/floppy.tree/etc/protocols +++ /dev/null @@ -1,7 +0,0 @@ -# -# Internet (IP) protocols -ip 0 IP # internet protocol, pseudo protocol number -icmp 1 ICMP # internet control message protocol -igmp 2 IGMP # Internet Group Management -tcp 6 TCP # transmission control protocol -udp 17 UDP # user datagram protocol diff --git a/release/picobsd/net/floppy.tree/etc/rc b/release/picobsd/net/floppy.tree/etc/rc deleted file mode 100644 index 8efee86aaeb0..000000000000 --- a/release/picobsd/net/floppy.tree/etc/rc +++ /dev/null @@ -1,60 +0,0 @@ -#!/bin/sh - -# $FreeBSD$ -############################################ -### Special setup for one floppy PICOBSD ### -### THIS IS NOT THE NORMAL /etc/rc !!!!! ### -############################################ -mount -a -t nonfs -if [ -f /etc/rc.conf ]; then - . /etc/rc.conf -fi -rm -f /var/run/* -if [ "x$swapfile" != "xNO" -a -w "$swapfile" -a -b /dev/vn0b ]; then - echo "Adding $swapfile as additional swap." - vnconfig /dev/vn0b $swapfile && swapon /dev/vn0b -fi -# configure serial devices -if [ -f /etc/rc.serial ]; then - . /etc/rc.serial -fi -# start up the initial network configuration. -if [ -f /etc/rc.network ]; then - . /etc/rc.network - network_pass1 -fi -mount -a -t nfs -chmod 666 /dev/tty[pqrsPQRS]* -# clean up left-over files -(cd /var/run && { cp /dev/null utmp; chmod 644 utmp; }) -if [ -n "$network_pass1_done" ]; then - network_pass2 -fi -if [ -n "$network_pass2_done" ]; then - network_pass3 -fi -if [ "X${inetd_enable}" = X"YES" ]; then - echo "Starting inetd."; inetd ${inetd_flags} -fi - -dev_mkdb - -echo '' -if [ "x$swapfile" = "xNO" ]; then - echo "WARNING: no swap partition!" - echo "Don't run too many programs at the same time..." -fi -echo '' -echo '' -echo '+----------- PicoBSD @VER@ (NET) ---------------+' -echo '| |' -echo '| Log in as "root" (password "setup"). |' -echo '| |' -echo '| This version of PicoBSD is fully under |' -echo '| BSD license. For more details see |' -echo '| http://www.freebsd.org/~picobsd, or contact |' -echo '| the author. |' -echo '| |' -echo '| abial@freebsd.org |' -echo '| |' -echo '+----------------------------------------------+' -exit 0 diff --git a/release/picobsd/net/floppy.tree/etc/rc.conf b/release/picobsd/net/floppy.tree/etc/rc.conf deleted file mode 100644 index 24cb9394bab4..000000000000 --- a/release/picobsd/net/floppy.tree/etc/rc.conf +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/sh -# $FreeBSD$ -swapfile="NO" # Set to name of swapfile if aux swapfile desired. -### Network configuration sub-section ###################### -### Basic network options: ### -hostname="pico.mydomain.edu" # Set this! -firewall="NO" # firewall type (see /etc/rc.firewall) or NO -tcp_extensions="NO" # Allow RFC1323 & RFC1644 extensions (or NO). -network_interfaces="lo0" # List of network interfaces (lo0 is loopback). -ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. -#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. -### Network daemons options: ### -inetd_enable="YES" # Run the network daemon dispatcher (or NO) -inetd_flags="" # Optional flags to inetd -snmpd_enable="YES" # Run the SNMP daemon (or NO) -snmpd_flags="-C -c /etc/snmpd.conf" # Optional flags to snmpd -### Network routing options: ### -defaultrouter="NO" # Set to default gateway (or NO). -static_routes="" # Set to static route list (or leave empty). -gateway_enable="NO" # Set to YES if this host will be a gateway. -arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. -### Allow local configuration override at the very end here ## -if [ -f /etc/rc.conf.local ]; then - . /etc/rc.conf.local -fi diff --git a/release/picobsd/net/floppy.tree/etc/rc.firewall b/release/picobsd/net/floppy.tree/etc/rc.firewall deleted file mode 100644 index c2860baedce0..000000000000 --- a/release/picobsd/net/floppy.tree/etc/rc.firewall +++ /dev/null @@ -1,172 +0,0 @@ -############ -# Setup system for firewall service. -# $FreeBSD$ - -############ -# Define the firewall type in /etc/rc.conf. Valid values are: -# open - will allow anyone in -# client - will try to protect just this machine -# simple - will try to protect a whole network -# closed - totally disables IP services except via lo0 interface -# UNKNOWN - disables the loading of firewall rules. -# filename - will load the rules in the given filename (full path required) -# -# For ``client'' and ``simple'' the entries below should be customized -# appropriately. - -############ -# -# If you don't know enough about packet filtering, we suggest that you -# take time to read this book: -# -# Building Internet Firewalls -# Brent Chapman and Elizabeth Zwicky -# -# O'Reilly & Associates, Inc -# ISBN 1-56592-124-0 -# http://www.ora.com/ -# -# For a more advanced treatment of Internet Security read: -# -# Firewalls & Internet Security -# Repelling the wily hacker -# William R. Cheswick, Steven M. Bellowin -# -# Addison-Wesley -# ISBN 0-201-6337-4 -# http://www.awl.com/ -# - -if [ "x$1" != "x" ]; then - firewall_type=$1 -fi - -############ -# Set quiet mode if requested -if [ "x$firewall_quiet" = "xYES" ]; then - fwcmd="/sbin/ipfw -q" -else - fwcmd="/sbin/ipfw" -fi - -############ -# Flush out the list before we begin. -$fwcmd -f flush - -############ -# If you just configured ipfw in the kernel as a tool to solve network -# problems or you just want to disallow some particular kinds of traffic -# they you will want to change the default policy to open. You can also -# do this as your only action by setting the firewall_type to ``open''. - -# $fwcmd add 65000 pass all from any to any - -############ -# Only in rare cases do you want to change these rules -$fwcmd add 1000 pass all from any to any via lo0 -$fwcmd add 1010 deny all from 127.0.0.0/8 to 127.0.0.0/8 - - -# Prototype setups. -if [ "${firewall_type}" = "open" -o "${firewall_type}" = "OPEN" ]; then - - $fwcmd add 65000 pass all from any to any - -elif [ "${firewall_type}" = "client" ]; then - - ############ - # This is a prototype setup that will protect your system somewhat against - # people from outside your own network. - ############ - - # set these to your network and netmask and ip - net="192.168.4.0" - mask="255.255.255.0" - ip="192.168.4.17" - - # Allow any traffic to or from my own net. - $fwcmd add pass all from ${ip} to ${net}:${mask} - $fwcmd add pass all from ${net}:${mask} to ${ip} - - # Allow TCP through if setup succeeded - $fwcmd add pass tcp from any to any established - - # Allow setup of incoming email - $fwcmd add pass tcp from any to ${ip} 25 setup - - # Allow setup of outgoing TCP connections only - $fwcmd add pass tcp from ${ip} to any setup - - # Disallow setup of all other TCP connections - $fwcmd add deny tcp from any to any setup - - # Allow DNS queries out in the world - $fwcmd add pass udp from any 53 to ${ip} - $fwcmd add pass udp from ${ip} to any 53 - - # Allow NTP queries out in the world - $fwcmd add pass udp from any 123 to ${ip} - $fwcmd add pass udp from ${ip} to any 123 - - # Everything else is denied as default. - -elif [ "${firewall_type}" = "simple" ]; then - - ############ - # This is a prototype setup for a simple firewall. Configure this machine - # as a named server and ntp server, and point all the machines on the inside - # at this machine for those services. - ############ - - # set these to your outside interface network and netmask and ip - oif="ed0" - onet="192.168.4.0" - omask="255.255.255.0" - oip="192.168.4.17" - - # set these to your inside interface network and netmask and ip - iif="ed1" - inet="192.168.3.0" - imask="255.255.255.0" - iip="192.168.3.17" - - # Stop spoofing - $fwcmd add deny all from ${inet}:${imask} to any in via ${oif} - $fwcmd add deny all from ${onet}:${omask} to any in via ${iif} - - # Stop RFC1918 nets on the outside interface - $fwcmd add deny all from 192.168.0.0:255.255.0.0 to any via ${oif} - $fwcmd add deny all from 172.16.0.0:255.240.0.0 to any via ${oif} - $fwcmd add deny all from 10.0.0.0:255.0.0.0 to any via ${oif} - - # Allow TCP through if setup succeeded - $fwcmd add pass tcp from any to any established - - # Allow setup of incoming email - $fwcmd add pass tcp from any to ${oip} 25 setup - - # Allow access to our DNS - $fwcmd add pass tcp from any to ${oip} 53 setup - - # Allow access to our WWW - $fwcmd add pass tcp from any to ${oip} 80 setup - - # Reject&Log all setup of incoming connections from the outside - $fwcmd add deny log tcp from any to any in via ${oif} setup - - # Allow setup of any other TCP connection - $fwcmd add pass tcp from any to any setup - - # Allow DNS queries out in the world - $fwcmd add pass udp from any 53 to ${oip} - $fwcmd add pass udp from ${oip} to any 53 - - # Allow NTP queries out in the world - $fwcmd add pass udp from any 123 to ${oip} - $fwcmd add pass udp from ${oip} to any 123 - - # Everything else is denied as default. - -elif [ "${firewall_type}" != "UNKNOWN" -a -r "${firewall_type}" ]; then - $fwcmd ${firewall_type} -fi diff --git a/release/picobsd/net/floppy.tree/etc/rc.network b/release/picobsd/net/floppy.tree/etc/rc.network deleted file mode 100644 index f9cf321bd1e2..000000000000 --- a/release/picobsd/net/floppy.tree/etc/rc.network +++ /dev/null @@ -1,79 +0,0 @@ -#!/bin/sh - -# $FreeBSD$ -network_pass1() { - echo -n 'Doing initial network setup:' - # Set the host name if it is not already set - if [ -z "`hostname -s`" ] ; then - hostname $hostname - echo ' hostname' - fi - # Set up all the network interfaces, calling startup scripts if needed - for ifn in ${network_interfaces}; do - if [ -e /etc/start_if.${ifn} ]; then - . /etc/start_if.${ifn} - fi - # Do the primary ifconfig if specified - eval ifconfig_args=\$ifconfig_${ifn} - if [ -n "${ifconfig_args}" ] ; then - ifconfig ${ifn} ${ifconfig_args} - fi - # Check to see if aliases need to be added - alias=0 - while : - do - eval ifconfig_args=\$ifconfig_${ifn}_alias${alias} - if [ -n "${ifconfig_args}" ]; then - ifconfig ${ifn} ${ifconfig_args} alias - alias=`expr ${alias} + 1` - else - break; - fi - done - ifconfig ${ifn} - done - # Load the filters if required - if [ -n "$firewall_enable" -a -f /etc/rc.firewall -a \ - "x$firewall_enable" = "xYES" ] ; then - . /etc/rc.firewall - echo "Firewall rules loaded." - else - echo "Warning: kernel has firewall functionality, but firewall rules weren't loaded." - echo " All ip services are ENABLED by default." - fi - # Configure routing - if [ "x$defaultrouter" != "xNO" ] ; then - static_routes="default ${static_routes}" - route_default="default ${defaultrouter}" - fi - # Set up any static routes. This should be done before router discovery. - if [ "x${static_routes}" != "x" ]; then - for i in ${static_routes}; do - eval route_args=\$route_${i} - route add ${route_args} - done - fi - echo -n 'Additional routing options:' - if [ -n "$tcp_extensions" -a "x$tcp_extensions" != "xYES" ] ; then - echo -n ' tcp_extensions=NO' - sysctl net.inet.tcp.rfc1323=0 >/dev/null 2>&1 - sysctl net.inet.tcp.rfc1644=0 >/dev/null 2>&1 - fi - if [ "X$gateway_enable" = X"YES" ]; then - echo -n ' IP_gateway=YES' - sysctl net.inet.ip.forwarding=1 >/dev/null 2>&1 - fi - if [ "X$arpproxy_all" = X"YES" ]; then - echo -n ' turning on ARP_PROXY_ALL: ' - sysctl net.link.ether.inet.proxyall=1 2>&1 - fi - echo '.' - network_pass1_done=YES # Let future generations know we made it. -} - -network_pass2() { - network_pass2_done=YES -} - -network_pass3() { - network_pass3_done=YES -} diff --git a/release/picobsd/net/floppy.tree/etc/rc.serial b/release/picobsd/net/floppy.tree/etc/rc.serial deleted file mode 100644 index 40fbd8a334cc..000000000000 --- a/release/picobsd/net/floppy.tree/etc/rc.serial +++ /dev/null @@ -1,127 +0,0 @@ -#!/bin/sh -# $FreeBSD$ - -# Change some defaults for serial devices. -# Standard defaults are: -# dtrwait 300 drainwait 0 -# initial cflag from = cread cs8 hupcl -# initial iflag, lflag and oflag all 0 -# speed 9600 -# special chars from -# nothing locked -# except for serial consoles the initial iflag, lflag and oflag are from -# and clocal is locked on. - -default() { - # Reset everything changed by the other functions to initial defaults. - - ci=$1; shift # call in device identifier - co=$1; shift # call out device identifier - - for i in $* - do - comcontrol /dev/tty$ci$i dtrwait 300 drainwait 0 - stty 's search phones file; possibly taken from -# PHONES environment variable) -# at ACU type -# ie input EOF marks (default is NULL) -# oe output EOF string (default is NULL) -# cu call unit (default is dv) -# br baud rate (defaults to 300) -# fs frame size (default is BUFSIZ) -- used in buffering writes on -# receive operations -# tc to continue a capability - -# Systems definitions -netcom|Netcom Unix Access:\ - :pn=\@:tc=unix1200: -omen|Omen BBS:\ - :pn=\@:tc=dos1200: - -# UNIX system definitions -unix1200|1200 Baud dial-out to a UNIX system:\ - :el=^U^C^R^O^D^S^Q:ie=%$:oe=^D:tc=dial1200: -unix300|300 Baud dial-out to a UNIX system:\ - :el=^U^C^R^O^D^S^Q:ie=%$:oe=^D:tc=dial300: - -# DOS system definitions -dos1200|1200 Baud dial-out to a DOS system:\ - :el=^U^C^R^O^D^S^Q:ie=%$:oe=^Z:pa=none:tc=dial1200: - -# General dialer definitions used below -# -# COURIER switch settings: -# switch: 1 2 3 4 5 6 7 8 9 10 -# setting: D U D U D D U D U U -# Rackmount: U U D U D U D D U D -# -dial2400|2400 Baud Hayes attributes:\ - :dv=/dev/cuaa0:br#2400:cu=/dev/cuaa0:at=hayes:du: -dial1200|1200 Baud Hayes attributes:\ - :dv=/dev/cuaa0:br#1200:cu=/dev/cuaa0:at=hayes:du: - -# Hardwired line -cuaa0b|cua0b:dv=/dev/cuaa0:br#2400 -cuaa0c|cua0c:dv=/dev/cuaa0:br#9600 diff --git a/release/picobsd/net/floppy.tree/etc/resolv.conf b/release/picobsd/net/floppy.tree/etc/resolv.conf deleted file mode 100644 index 4438442fb0ed..000000000000 --- a/release/picobsd/net/floppy.tree/etc/resolv.conf +++ /dev/null @@ -1,3 +0,0 @@ -# $FreeBSD$ -domain mydomain.edu -nameserver 192.33.4.12 diff --git a/release/picobsd/net/floppy.tree/etc/services b/release/picobsd/net/floppy.tree/etc/services deleted file mode 100644 index eec499fafec7..000000000000 --- a/release/picobsd/net/floppy.tree/etc/services +++ /dev/null @@ -1,94 +0,0 @@ -echo 4/ddp -echo 7/tcp -echo 7/udp -discard 9/tcp -discard 9/udp -systat 11/tcp -systat 11/udp -daytime 13/tcp -daytime 13/udp -qotd 17/tcp -qotd 17/udp -chargen 19/tcp -chargen 19/udp -ftp-data 20/tcp -ftp-data 20/udp -ftp 21/tcp -ftp 21/udp -ssh 22/tcp -ssh 22/udp -telnet 23/tcp -telnet 23/udp -smtp 25/tcp -smtp 25/udp -time 37/tcp -time 37/udp -domain 53/tcp -domain 53/udp -tacacs-ds 65/tcp -tacacs-ds 65/udp -bootps 67/tcp -bootps 67/udp -bootpc 68/tcp -bootpc 68/udp -tftp 69/tcp -tftp 69/udp -gopher 70/tcp -gopher 70/udp -finger 79/tcp -finger 79/udp -http 80/tcp -http 80/udp -pop2 109/tcp -pop2 109/udp -pop3 110/tcp -pop3 110/udp -uucp-path 117/tcp -uucp-path 117/udp -nntp 119/tcp -nntp 119/udp -netbios-ns 137/tcp -netbios-ns 137/udp -netbios-dgm 138/tcp -netbios-dgm 138/udp -netbios-ssn 139/tcp -netbios-ssn 139/udp -imap 143/tcp -imap 143/udp -snmp 161/tcp -snmp 161/udp -snmptrap 162/tcp -snmptrap 162/udp -bgp 179/tcp -bgp 179/udp -irc 194/tcp -irc 194/udp -ipx 213/tcp -ipx 213/udp -imap3 220/tcp -imap3 220/udp -ldap 389/tcp -ldap 389/udp -netware-ip 396/tcp -netware-ip 396/udp -https 443/tcp -https 443/udp -exec 512/tcp -biff 512/udp -login 513/tcp -who 513/udp -cmd 514/tcp -syslog 514/udp -printer 515/tcp -printer 515/udp -talk 517/tcp -talk 517/udp -ntalk 518/tcp -ntalk 518/udp -timed 525/tcp -timed 525/udp -uucp 540/tcp -uucp 540/udp -uucp-rlogin 541/tcp -uucp-rlogin 541/udp -natd 8668/divert # Network Address Translation diff --git a/release/picobsd/net/floppy.tree/etc/shells b/release/picobsd/net/floppy.tree/etc/shells deleted file mode 100644 index df377f133737..000000000000 --- a/release/picobsd/net/floppy.tree/etc/shells +++ /dev/null @@ -1,6 +0,0 @@ -# List of acceptable shells for chpass(1). -# Ftpd will not allow users to connect who are not using -# one of these shells. - -/bin/sh -/bin/csh diff --git a/release/picobsd/net/floppy.tree/etc/snmpd.conf b/release/picobsd/net/floppy.tree/etc/snmpd.conf deleted file mode 100644 index 29400dfb4b5e..000000000000 --- a/release/picobsd/net/floppy.tree/etc/snmpd.conf +++ /dev/null @@ -1,58 +0,0 @@ -# load average checks - -# load [1MAX=DEFMAXLOADAVE] [5MAX=DEFMAXLOADAVE] [15MAX=DEFMAXLOADAVE] -# -# 1MAX: If the 1 minute load average is above this limit at query -# time, the errorFlag will be set. -# 5MAX: Similar, but for 5 min average. -# 15MAX: Similar, but for 15 min average. - -# Check for loads: -load 12 14 14 - -# % snmpwalk -v 1 localhost public .1.3.6.1.4.1.2021.10 - -# snmp agent errors - -# % snmpwalk -v 1 localhost public .1.3.6.1.4.1.2021.101 - -# snmp version mib - -# % snmpwalk -v 1 localhost public .1.3.6.1.4.1.2021.100 - -# System contact information - -syslocation PicoBSD -syscontact root - -# Setting up the access control lists to the agent - -# sec.name source community -com2sec local localhost private -com2sec public default public - -# sec.model sec.name -group local any local -group public any public - -# incl/excl subtree mask -view all included .1 80 -view system included system fe -view mib2 included .iso.org.dod.internet.mgmt.mib-2 fc - -# context sec.model sec.level prefix read write not -access public "" any noauth 0 system none none -access local "" any noauth 0 all all all - -# If you want to get back to the functionality of previous versions, -# where the public community could read anything from anywhere and the -# private community could write anything from anywhere, use these -# lines instead: -# -# com2sec public default public -# com2sec private default private -# group public any public -# group private any private -# view all included .1 80 -# access public "" any noauth 0 all none none -# access private "" any noauth 0 all all none diff --git a/release/picobsd/net/floppy.tree/etc/termcap b/release/picobsd/net/floppy.tree/etc/termcap deleted file mode 100644 index 5a9316af0295..000000000000 --- a/release/picobsd/net/floppy.tree/etc/termcap +++ /dev/null @@ -1,123 +0,0 @@ -# Copyright (c) 1980, 1985, 1989 The Regents of the University of California. -# All rights reserved. -# @(#)termcap.src 5.88 (Berkeley) 4/30/91 -# -# -# for syscons -# common entry without semigraphics -cons25w|ansiw|ansi80x25-raw:\ - :al=\E[L:am:bs:NP:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:co#80:\ - :dc=\E[P:dl=\E[M:do=\E[B:bt=\E[Z:ho=\E[H:ic=\E[@:li#25:cb=\E[1K:\ - :ms:nd=\E[C:pt:rs=\E[x\E[m\Ec:so=\E[7m:se=\E[m:up=\E[A:\ - :pa#64:Co#8:Sf=\E[3%dm:Sb=\E[4%dm:op=\E[37;40m:\ - :k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:\ - :k9=\E[U:k;=\E[V:F1=\E[W:F2=\E[X:K2=\E[E:nw=\E[E:ec=\E[%dX:\ - :kb=^H:kh=\E[H:ku=\E[A:kd=\E[B:kl=\E[D:kr=\E[C:le=^H:eo:sf=\E[S:sr=\E[T:\ - :kN=\E[G:kP=\E[I:@7=\E[F:kI=\E[L:kD=\E[K:kB=\E[Z:\ - :IC=\E[%d@:DC=\E[%dP:SF=\E[%dS:SR=\E[%dT:AL=\E[%dL:DL=\E[%dM:\ - :DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:cv=\E[%i%dd:ch=\E[%i%d`:bw:\ - :mb=\E[5m:md=\E[1m:mh=\E[30;1m:mr=\E[7m:me=\E[m:bl=^G:ut:it#8: -cons25|ansis|ansi80x25:\ - :ac=l\332m\300k\277j\331u\264t\303v\301w\302q\304x\263n\305`^Da\260f\370g\361~\371.^Y-^Xh\261I^U0\333y\363z\362:\ - :tc=cons25w: -cons25-m|ansis-mono|ansi80x25-mono:\ - :pa@:Co@:Sf@:Sb@:op@:us=\E[4m:ue=\E[m:md@:mh@:tc=cons25: -cons50|ansil|ansi80x50:\ - :li#50:tc=cons25: -cons50-m|ansil-mono|ansi80x50-mono:\ - :li#50:tc=cons25-m: -# 80x25 ISO 8859-1 FreeBSD console -cons25l1|cons25-iso8859-1:\ - :ac=l\215m\216k\214j\213u\226t\225v\227w\230q\222x\231n\217o\220s\224p\221r\223`\201a\202f\207g\210~\237.^Y-^X+\253,\273I\247y\232z\233:\ - :tc=cons25w: -cons25l1-m|cons25-iso8859-1-mono:\ - :pa@:Co@:Sf@:Sb@:op@:us=\E[4m:ue=\E[m:md@:mh@:tc=cons25l1: -# 80x50 ISO 8859-1 FreeBSD console -cons50l1|cons50-iso8859-1:\ - :li#50:tc=cons25l1: -cons50l1-m|cons50-iso8859-1-mono:\ - :li#50:tc=cons25l1-m: -dosansi|ANSI.SYS standard crt|ansi:\ - :am:bs:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:co#80:\ - :do=\E[B:li#25:mi:nd=\E[C:\ - :se=\E[m:so=\E[7m:up=\E[A:us=\E[4m:ue=\E[m:\ - :md=\E[1m:mh=\E[m:mb=\E[5m:me=\E[m:\ - :kh=\EG:kb=^h:ku=\EH:kd=\EP:kl=\EK:kr=\EM:\ - :k1=\E;:k2=\E<:k3=\E=:k4=\E>:k5=\E?:\ - :k6=\E@:k7=\EA:k8=\EB:k9=\EC:k0=\ED: - -# Note: this entry describes the "native" -# capabilities of the PC monochrome display, without ANY emulation; most -# communications packages (but NOT PC/IX connect) do some kind of emulation. -pc|ibmpc|ibm pc PC/IX:\ - :li#24:co#80:am:bs:bw:eo:\ - :cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:do=\E[B:ho=\E[;H:\ - :nd=\E[C:up=\E[A:so=\E[7m:se=\E[0m:us=\E[4m:ue=\E[0m: -pc3mono|IBM PC 386BSD Console with monochrome monitor:\ - :so=\E[0;1r\E[m:tc=pc3: -pc3|ibmpc3|IBM PC 386BSD Console:\ - :Co#8:\ - :DO=\E[%dB:\ - :F1=\E[W:\ - :F2=\E[X:\ - :K1=\E[H:\ - :K2=\E[I:\ - :K3=\E[E:\ - :K4=\E[F:\ - :K5=\E[G:\ - :LE=\E[%dD:\ - :RI=\E[%dC:\ - :Sb=\E[1;%dx:\ - :Sf=\E[2;%dx:\ - :UP=\E[%dA:\ - :ac=l\332m\300k\277j\331u\264t\303v\301w\302q\304x\263n\305`^Da\260f\370g\361~\371.^Y-^Xh\261I^U0\333y\363z\362:\ - :am:\ - :bl=^G:\ - :bs:\ - :cb=\E[1K:\ - :cd=\E[J:\ - :ce=\E[K:\ - :cl=\E[H\E[J:\ - :cm=\E[%i%d;%dH:\ - :co#80:\ - :cr=^M:\ - :do=\E[B:\ - :ho=\E[H:\ - :is=\E[m:\ - :it#8:\ - :k;=\E[V:\ - :k1=\E[M:\ - :k2=\E[N:\ - :k3=\E[O:\ - :k4=\E[P:\ - :k5=\E[Q:\ - :k6=\E[R:\ - :k7=\E[S:\ - :k8=\E[T:\ - :k9=\E[U:\ - :kD=\177:\ - :@7=\E[F:\ - :kN=\E[G:\ - :kP=\E[I:\ - :kb=\177:\ - :kd=\E[B:\ - :kh=\E[H:\ - :kl=\E[D:\ - :kr=\E[C:\ - :ku=\E[A:\ - :le=^H:\ - :li#25:\ - :ms:\ - :nd=\E[C:\ - :op=\E[x:\ - :pa#64:\ - :rs=\E[m:\ - :se=\E[m:\ - :sf=\E[S:\ - :so=\E[7;1r\E[7m:\ - :sr=\E[T:\ - :ta=^I:\ - :te=\E[m:\ - :ti=\E[m:\ - :up=\E[A:\ - :ut: diff --git a/release/picobsd/net/floppy.tree/etc/ttys b/release/picobsd/net/floppy.tree/etc/ttys deleted file mode 100644 index 8ef5e6ebb37f..000000000000 --- a/release/picobsd/net/floppy.tree/etc/ttys +++ /dev/null @@ -1,32 +0,0 @@ -# -# @(#)ttys 5.1 (Berkeley) 4/17/89 -# -# name getty type status comments -# -# This entry needed for asking password when init goes to single-user mode -# If you want to be asked for password, change "secure" to "insecure" here -#console none unknown off secure -vga none cons25 off secure -# -ttyv0 "/usr/libexec/getty Pc" cons25 on secure -# Virtual terminals -ttyv1 "/usr/libexec/getty Pc" cons25 on secure -ttyv2 "/usr/libexec/getty Pc" cons25 on secure -#ttyv3 "/usr/libexec/getty Pc" cons25 on secure -#ttyv4 "/usr/libexec/getty Pc" cons25 on secure -#ttyv5 "/usr/libexec/getty Pc" cons25 on secure -#ttyv6 "/usr/libexec/getty Pc" cons25 on secure -#ttyv7 "/usr/libexec/getty Pc" cons25 on secure -#ttyv8 "/usr/libexec/getty Pc" cons25 on secure -#ttyv9 "/usr/libexec/getty Pc" cons25 on secure -# Pseudo terminals -ttyp0 none network secure -ttyp1 none network secure -ttyp2 none network secure -ttyp3 none network -ttyp4 none network -ttyp5 none network -ttyp6 none network -ttyp7 none network -ttyp8 none network -ttyp9 none network diff --git a/release/picobsd/net/floppy.tree/kernel.config b/release/picobsd/net/floppy.tree/kernel.config deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/release/picobsd/net/lang/README.en b/release/picobsd/net/lang/README.en deleted file mode 100644 index d2482aeed561..000000000000 --- a/release/picobsd/net/lang/README.en +++ /dev/null @@ -1,41 +0,0 @@ -1998.07.12, Warsaw, Poland - - PicoBSD @VER@ (NET) - ----------------- - - -What is PicoBSD? ----------------- - -It's a one floppy version of FreeBSD (please see http://www.freebsd.org), -configured mainly for networking applications. It can be used as a router or -firewall, or kind of a fixit floppy (or all of them). - -You can find more information on the home page of this project at: - - http://www.freebsd.org/~picobsd/ - -What are minimal requirements? ------------------------------- - -* 386SX CPU or better (there is an FPU emulator in kernel) -* 10MB RAM - the more the better. If you have an HDD, you can make a - swap partition or swap file (using vnode driver and vnconfig). Then you - probably will be able to run with ca. 6MB only. But RAM is cheap... -* Modem sitting on COM1-COM4 (default is to use COM2), if you want to have - a PPP connection. -* Network card: compatible with NE2000, PCI Intel, 3Com 3c509 or with DEC - chipsets (ed, ep, fxp and de drivers). The kernel supports two of each - ISA (i.e. +6 total) plus two PPP connections (tun interfaces). So you can - easily build something like router with as many as 8 outlets :-) - -For detailed description and list of supported hardware see the original -documentation, or: - - http://www.freebsd.org/~picobsd/picobsd.html - -I'll be glad hearing from you about your experiences with PicoBSD. Thanks. - -Have fun! - -Andrzej Bialecki diff --git a/release/picobsd/net/lang/README.pl b/release/picobsd/net/lang/README.pl deleted file mode 100644 index d7e3f6755ceb..000000000000 --- a/release/picobsd/net/lang/README.pl +++ /dev/null @@ -1,56 +0,0 @@ -1998.07.12, Warszawa - - PicoBSD @VER@ (wersja NET) - ------------------------ - -Co to jest PicoBSD? -------------------- - -Jest to jednodyskietkowa wersja FreeBSD skonfigurowana glownie pod katem -zastosowania jako klient/serwer uslug sieciowych (takich jak routing, -firewall, NFS). W celu zapoznania sie z pelnym systemem zajrzyj na -http://www.freebsd.org. Oficjalna strona tego projektu znajduje sie na -http://www.freebsd.org/~picobsd. - -Jakie sa minimalne wymagania? ------------------------------ - -* Procesor 386SX lub lepszy (jadro posiada emulator FPU) -* 10MB pamieci - jest to absolutnie nieprzekraczalne minimum. Oczywiscie im - wiecej, tym lepiej - ograniczenie jest glownie spowodowane brakiem swapu. Po - zapoznaniu sie z systemem mozesz sobie skonfigurowac tzw. swap-file na dysku - twardym, np. na partycji DOS-owej. Wowczas prawdopodobnie wystarczy 6MB - pamieci. -* Modem, skonfigurowany na COM1-COM4 (standardowo system wykorzystuje COM2), - jesli bedzie wykorzystywany dostep przez PPP. -* Karta sieciowa: kompatybilna z NE2000, niektore typy 3Com, lub wersje PCI z - chipsetem DEC21040 (drivery ed, ep, fxp i de). Jadro jest skonfigurowane - tak, zeby moc obsluzyc po dwie karty ed, ep, i de (czyli w sumie siedem) - oraz dwa polaczenia PPP rownoczesnie. Mozna wiec zbudowac router z 9 - interfejsami... :-) - -Jakie sa roznice w stosunku do poprzedniej wersji? --------------------------------------------------- - -* Poszerzony zestaw sterownikow w jadrze systemu -* dodana obsluga CD-ROM -* agent SNMP (pelna wersja ucd-snmp, pozwalajaca na monitorowanie procesow i - zdalne uruchamianie skryptow) -* brak ssh, ftp i edytora ee (oznacza to, ze musisz edytowac pliki - konfiguracyjne montujac dyskietke na normalnym systemie) -* dodany inetd, telnetd, routed, tftpd, bootpd, ps, kill, netstat, - ping, traceroute -* brak vnconfig i vn(4): w przypadku routera powinien on miec tyle pamieci - RAM, zeby nie potrzebowac swapu, lub miec normalny swap. -* dodana obsluga hasel (passwd(1)) -* dodana obsluga NFS (klient) -* sa dwaj uzytkownicy: root (haslo 'setup') i user (haslo 'PicoBSD'). Ze - wzgledu na skomplikowana sprawe z prawami dostepu, user praktycznie moze - jedynie zrobic te rzeczy, ktore nie wymagaja praw roota (czyli np. telnet). -* dodany skrypt 'update', ktory powoduje uaktualnienie zawartosci katalogu - /etc na dyskietce w stosunku do tego, co znajduje sie na MFS. - - -Milej zabawy! - -Andrzej Bialecki diff --git a/release/picobsd/net/lang/boot.help.en b/release/picobsd/net/lang/boot.help.en deleted file mode 100644 index 7cbce1354839..000000000000 --- a/release/picobsd/net/lang/boot.help.en +++ /dev/null @@ -1,18 +0,0 @@ -Usage: bios_drive:interface(unit,partition)kernel_name options - bios_drive 0, 1, ... - interface fd, wd or sd - unit 0, 1, ... - partition a, c, ... - kernel_name name of kernel, or ? for list of files in root directory - options -a (ask name) -C (cdrom) -c (userconfig) -D (dual consoles) - -d (debug early) -g (gdb) -h (serial console) -P (probe kbd) - -r (default root) -s (single user) -v (verbose) -Examples: - 1:sd(0,a)mykernel boot `mykernel' on the first SCSI drive when one IDE - drive is present - 1:wd(2,a) boot from the second (secondary master) IDE drive - 1:sd(0,a)? list the files in the root directory on the specified - drive/unit/partition, and set the default bios_drive, - interface, unit and partition - -cv boot with the defaults, then run UserConfig to modify - hardware parameters (c), and print verbose messages (v) diff --git a/release/picobsd/net/lang/boot.help.pl b/release/picobsd/net/lang/boot.help.pl deleted file mode 100644 index bb5b422529aa..000000000000 --- a/release/picobsd/net/lang/boot.help.pl +++ /dev/null @@ -1,16 +0,0 @@ -Opcje: dysk_bios:kontroler(dysk,partycja)nazwa_kernela opcje - dysk_bios 0, 1, ... - kontroler fd (dyskietka), wd (dysk IDE) lub sd (dysk SCSI) - dysk 0, 1, ... (numer dysku w kontrolerze) - partycja a, c, e, f ... (wedlug nazewnictwa BSD) - nazwa_kernela nazwa pliku kernela, lub ? zeby dostac liste plikow - opcje -a (pytaj o rootdev) -C (cdrom) -c (userconf.) -D (podwojna konsola) - -d (uruchom debugger) -g (gdb) -h (konsola szeregowa) - -P (probkuj klawiature) -r (domyslny rootdev) -s (tryb single user) - -v (verbose - szczegolowe komunikaty) -Np: 1:sd(0,a)mykernel startuj `mykernel' z 1 dysku SCSI gdy jest tez 1 dysk - IDE, i jednoczesnie ustaw go jako domyslny dysk_bios, - kontroler, dysk i partycje - -cv startuj z parametrami domyslnymi, potem uruchom - konfiguracje param. sprzetowych (-c), i podawaj - szczegolowe komunikaty w trakcie bootowania (-v). diff --git a/release/picobsd/net/lang/hosts.en b/release/picobsd/net/lang/hosts.en deleted file mode 100644 index 53f13bab8b37..000000000000 --- a/release/picobsd/net/lang/hosts.en +++ /dev/null @@ -1,5 +0,0 @@ -# $FreeBSD$ -# This file should contain the addresses and aliases -# for local hosts that share this file. -127.0.0.1 localhost localhost.mydomain.edu -127.0.0.1 pico.mydomain.edu diff --git a/release/picobsd/net/lang/hosts.pl b/release/picobsd/net/lang/hosts.pl deleted file mode 100644 index 89081d798683..000000000000 --- a/release/picobsd/net/lang/hosts.pl +++ /dev/null @@ -1,5 +0,0 @@ -# $FreeBSD$ -# This file should contain the addresses and aliases -# for local hosts that share this file. -127.0.0.1 localhost localhost.mydomain.org.pl -127.0.0.1 pico.mydomain.org.pl diff --git a/release/picobsd/net/lang/motd.en b/release/picobsd/net/lang/motd.en deleted file mode 100644 index 97194182eedf..000000000000 --- a/release/picobsd/net/lang/motd.en +++ /dev/null @@ -1,12 +0,0 @@ -================================================== - )\_)\ -PicoBSD @VER@ (NET) (o,o) - __ \~/ -Welcome to PicoBSD! -->====\ - ~~ d d -You can find a short description of the picoBSD -system in file /README. You can view it using -"more /README". - -For more info contact the author (abial@freebsd.org). - diff --git a/release/picobsd/net/lang/motd.pl b/release/picobsd/net/lang/motd.pl deleted file mode 100644 index 4b1fcf551518..000000000000 --- a/release/picobsd/net/lang/motd.pl +++ /dev/null @@ -1,12 +0,0 @@ -======================================================= - )\_)\ -PicoBSD @VER@ (NET) (o,o) - __ \~/ -Witamy w PicoBSD! -->====\ - ~~ d d -W glownym katalogu w pliku README znajdziesz picoBSD -krotki opis systemu. Mozesz go obejrzec przy pomocy -"more /README". - -Wiecej informacji znajdziesz u autora (abial@freebsd.org). -