Thanks to bapt, bz, cem, woodsb02, Neel Chauhan and Salvador Martínez
Mármol for helping test the initial 9000-series support.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This is what iwlwifi seems to do, and the previous behaviour triggered
firmware panics during transmit on a 9560.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Though we don't otherwise use firmware's offload capabilities, we need
to set this flag when the MAC header's size isn't a multiple of four.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
- Configure the scheduler only for the management queue.
- Fix a bug when enabling the schduler: the queues are specified using a
bitmask.
- Fix style in the area.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This is the multiqueue receive code required for 9000-series chips.
Note that we still only configure a single RX queue for now. Multiqueue
support will require MSI-X configuration and a scheme for managing a
global pool of RX buffers.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
For now iwm only ever uses queue 0 and the management queue, but my 9560
raises a software error interrupt during initialization if this flag is
not set. iwlwifi sets it for all 7000- and 8000-series hardware, so we
might as well do it unconditionally.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
The firmware for 9000-series and newer devices has a different receive
API which supports multiple queues.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Match such chips using the device ID. We should really be checking the
subdevice as well, since a smaller number of 9460 and 9560 devices
actually belong to a new series of devices and require different
firmware, but that will require some extra logic in iwm_attach().
Submitted by: lwhsu, Guo Wen Jun <blockk2000@gmail.com>
MFC after: 2 weeks
Convert existing device family checks to avoid assuming that the device
family is always one of IWM_DEVICE_FAMILY_7000 or _8000.
Submitted by: lwhsu, Guo Wen Jun <blockk2000@gmail.com>
MFC after: 2 weeks
Only perform the call when a qfull bit transitions. While here, avoid
assignments in declarations in iwm_mvm_rx_tx_cmd().
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This ensures that the driver softc reflects device capabilities as early
as possible, for use by device initialization code that is conditional
on certain capabilities.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Also ensure that the htole* macros are applied correctly when specifying
the segment length and upper address bits. No functional change
intended (unless you use iwm(4) on a big-endian machine).
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Alter bsd.compat.mk to set MACHINE and MACHINE_ARCH when included
directly so MD paths in Makefiles work. In the process centralize
setting them in LIBCOMPATWMAKEENV.
Alter .PATH and CFLAGS settings in work when the Makefile is included.
While here only support LIB32 on supported platforms rather than always
enabling it and requiring users of MK_LIB32 to filter based
TARGET/MACHINE_ARCH.
The net effect of this change is to make Makefile.libcompat only build
compatability libraries.
Changes relative to r354449:
Correct detection of the compiler type when bsd.compat.mk is used
outside Makefile.libcompat. Previously it always matched the clang
case.
Set LDFLAGS including the linker emulation for mips where -m32 seems to
be insufficent.
Reviewed by: imp, kib (origional version in r354449)
Obtained from: CheriBSD (conceptually)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22251
This is a standard required property for interrupt controllers, and present
on the bcm_lintc nodes for currently supported RPi models. For the RPi4, we
have both bcm_lintc as well as GIC-400, but only one may be active at a
time.
Don't probe bcm_lintc if it's missing the "interrupt-controller" property --
in RPi 4 DTS, the bcm_lintc node is actually missing this along with other
required interrupt properties. Presumably, if the earlier boot stages will
support switching to the legacy interrupt controller (as is suggested
possible by the documentation), the DTS will need to be updated to indicate
the proper interrupt-parent and hopefully also mark this node as an
interrupt-controller instead.
handlers can be greatly simplified. All the previous double
cycling and complex locking was added to avoid these functions
holding global PCB locks for extended period of time, preventing
addition of new entries.
in the network epoch, we can greatly simplify synchronization.
Remove all unneccesary epoch enters hidden under INP_INFO_RLOCK macro.
Remove some unneccesary assertions and convert necessary ones into the
NET_EPOCH_ASSERT macro.
x86 stack_save_td_running() can work safely only if IPI_TRACE is a
non-maskable interrupt. But at the moment FreeBSD/Xen does not provide
support for the NMI delivery mode. So, mark the functionality as
unsupported similarly to other platforms without NMI.
Maybe there is a way to provide a Xen-specific working
stack_save_td_running(), but I couldn't figure it out.
MFC after: 3 weeks
Sponsored by: Panzura
locking in udp_output() and udp6_output().
First, we select if we need read or write lock in PCB itself, we take
the lock and enter network epoch. Then, we proceed for the rest of
the function. In case if we need to modify PCB hash, we would take
write lock on it for a short piece of code.
We could exit the epoch before allocating an mbuf, but with this
patch we are keeping it all the way into ip_output()/ip6_output().
Today this creates an epoch recursion, since ip_output() enters epoch
itself. However, once all protocols are reviewed, ip_output() and
ip6_output() would require epoch instead of entering it.
Note: I'm not 100% sure that in udp6_output() the epoch is required.
We don't do PCB hash lookup for a bound socket. And all branches of
in6_select_src() don't require epoch, at least they lack assertions.
Today inet6 address list is protected by rmlock, although it is CKLIST.
AFAIU, the future plan is to protect it by network epoch. That would
require epoch in in6_select_src(). Anyway, in future ip6_output()
would require epoch, udp6_output() would need to enter it.
we lookup PCBs. Thus, do not enter epoch recursively in
in_pcblookup_hash() and in6_pcblookup_hash(). Same applies to
tcp_ctlinput() and tcp6_ctlinput().
This leaves several sysctl(9) handlers that return PCB credentials
unprotected. Add epoch enter/exit to all of them.
Differential Revision: https://reviews.freebsd.org/D22197
- amd_intr() does not account for the offset (0x200) in the counter
MSR address and ends up accessing invalid regions while reading
counter value after the 4th counter (0xC001000[8,9,..]) and
erroneously updates the counter values for counters [1-4].
- amd_intr() should only check core pmcs for interrupts since
other types of pmcs (L3,DF) cannot generate interrupts.
- fix pmc NMI's being ignored due to NMI latency on newer AMD processors
Note that this fixes a kernel panic due to GPFs accessing MSRs on
higher core count AMD cpus (seen on both Rome 7502P, and
Threadripper 2990WX 32-core CPUs)
Discussed with: markj
Submitted by: Shreyank Amartya
Differential Revision: https://reviews.freebsd.org/D21553
