was used to control code which were conditional on DEVFS' precense
since this avoided the need for large-scale source pollution with
#include "opt_geom.h"
Now that we approach making DEVFS standard, replace these tests
with an #ifdef to facilitate mechanical removal once DEVFS becomes
non-optional.
No functional change by this commit.
more than return ENXIO from its open routine, so most of this file
is unneeded.
A straight #ifdef'ing would look quite messy, and make the file
quite unreadable, so instead I have simply added the DEVFS version
of the file at the top, protected by #ifndef NODEVFS.
Once we have removed NODEVFS option, we can retain 86 the 86 lines at
the top and drop the other 287 lines.
This allows me to mark code which they control with #ifdef without
polluting files with #includes of opt_devfs.h and opt_geom.h.
Once these two options are removed, this will allow mechanical removal
of the bits their removal makes obsolete.
<machine/ieeefp.h> where it belongs.
o Remove the i386 specific inclusion of <machine/floatingpoint.h>
from <ieeefp.h>, now that including <machine/ieeefp.h> is enough
for all architectures.
o Allow <machine/ieeefp.h> to inline the functions exposed by the
headers by checking for _IEEEFP_INLINED_ in the MI header. When
defined, prototypes are not given and it is assumed that the MD
headers, when inlining only a subset of the functions provide
prototypes for the functions not being inlined.
Based on patch from: Terry Lambert <tlambert2@mindspring.com>
Tested with: make release.
- Add conversions to/from little endian for fields that the NIC accesses
by DMA as required.
- Add some bus_dmamap_sync() calls, and correct some existing ones.
- Read the receiver information from the EEPROM in an endian-neutral
manner.
- Load all RX and TX descriptors in a single DMA map up front, and
get the bus addresses of individual descriptors by address arithmetic;
this fixes multiple use of the descriptor tags, which would have
undesired effects.
It seems that xl still does not work on e250 boxen, for reasons which
are not clear yet.
Reviewed by: mux
yet that depend on it because sio(4) needs support for it before it
can be used. There's no reason why zs(4) couldn't attach to puc(4)
in the (near?) future (in principle), so don't make memory mapped I/O
support in sio(4) a precondition for this change.
NULL. union_whiteout() expects the componentname argument to be non-NULL.
Fixes a NULL dereference panic when an existing union mount becomes the
upper layer of a new union mount.
SS_ISCONNECTING state, returning EINVAL (which is what POSIX mandates
in this case).
listen() on connected or connecting sockets would cause them to enter
a bad state; in the TCP case, this could cause sockets to go
catatonic or panics, depending on how the socket was connected.
Reviewed by: -net
MFC after: 2 weeks
the three configuration ioctls which need a unit number.
Add a "ccd.ctl" device for config operations.
Implement ioctls on ccd.ctl which rely on the explicityly passed
unit numbers.
Update ccdconfig to use the new ccd.ctl interface.
Add code to the kernel to detect old ccdconfig binaries, and whine
about it.
Add code to ccdconfig to detect old kernels, and whine about it.
These two compatibility measures will be retained only for a limited
period since they are in the way of GEOM'ification of ccd.
Interface (SMAPI) BIOS, which is present on some IBM
Thinkpad models (560, 600, 770 to name a few.)
The SMAPI BIOS provides access to System Information,
System Configuration, and Power Management.
vm_pageout_deficit:
1. Update vm_pageout_deficit before VM_WAIT. There is no sense in
delaying the update; the sooner the pageout daemon receives this
information the better. Reviewed by: tegge
2. Update vm_pageout_deficit according to the number of pages still
needed to complete the allocation, not the original size of the
allocation. Submitted by: tegge
(These errors have existed since the introduction of vm_pageout_deficit
in revision 1.144.)
* Fix a bug where devices weren't cleaned up on close(): CAM_REQ_CMP != 0
user:
* Increase timeout in usermode to CAM_TIME_INFINITY. The initiator is in
charge of timeouts and the value was in ms, not seconds.
* Bring two debugging printfs under the debug flag
* Clean up man page to show increased testing on isp(4)
Submitted by: gibbs (bugfixes)
portable copy. Note that pmap_extract() must be used instead of
pmap_kextract().
This is precursor work to a reorganization of vmapbuf() to close remaining
user/kernel races (which can lead to a panic).
frequency in Hz. The default is still 33.333 MHz. Please notice
that the number is round to a multiple of four internally so it may
not read back exactly the same as written.
Add compile time ELAN_XTAL option to override the 33.333 MHz default.
Add compile time ELAN_PPS option to enable code for high precision
(250 nanoseconds) timestamping of external signals.
state machine to provide station and host ap functionality for drivers.
More work will follow to split out the state machine and protocol
support from the ioctl interfaces to ease portability/sharing with
NetBSD and forthcoming ports to other systems.
Reviewed by: imp
Obtained from: NetBSD (originally)
descriptor request, which usbd_get_string_desc() uses to get the
length of a descriptor. One device for instance returns a full 8
byte long packet instead which confuses the rest of the stack and
leads to the USB port being reset. The fix is to instead request
two bytes, but not to complain if we only get one.
Submitted by: kan
MFC after: 3 days
in addition to secure level 1. The mask supports up to a secure level of 8
but only add defines through CTLFLAG_SECURE3 for now.
As per the missif in the log entry for 1.11 of ip_fw2.c which added the
secure flag to the IPFW sysctl's in the first place, change the secure
level requirement from 1 to 3 now that we have support for it.
Reviewed by: imp
With Design Suggestions by: imp
and ether_ifattach() to end. This fixes a "could sleep" case and
simplifies error exit cases as well. Also be sure to set errno
and clean up resources in !mac error case.
Tested by: Ryan Beasley
vchan creation doesn't lead to /dev entry creation if the new vchan is the
first child of a channel,
This fix a panic that happens when loading a sound driver module, creating
vchans and unloading the driver.
Approved by: cg
MFC after: 3 days
confuses the controller, tell CAM not to do it. Also report the
correct error condition to CAM when it tries to probe a target that
doesn't exists.
This should make the CAM interface less risky to use.
MFC After: 3 days
dereferenced when a process exits due to the vmspace ref-count being
bumped. Change shmexit() and shmexit_myhook() to take a vmspace instead
of a process and call it in vmspace_dofree(). This way if it is missed
in exit1()'s early-resource-free it will still be caught when the zombie is
reaped.
Also fix a potential race in shmexit_myhook() by NULLing out
vmspace->vm_shm prior to calling shm_delete_mapping() and free().
MFC after: 7 days
access its controlling terminal.
In essense, history dictates that any process is allowed to open
/dev/tty for RW, irrespective of credential, because by definition
it is it's own controlling terminal.
Before DEVFS we relied on a hacky half-device thing (kern/tty_tty.c)
which did the magic deep down at device level, which at best was
disgusting from an architectural point of view.
My first shot at this was to use the cloning mechanism to simply
give people the right tty when they ask for /dev/tty, that's why
you get this, slightly counter intuitive result:
syv# ls -l /dev/tty `tty`
crw--w---- 1 u1 tty 5, 0 Jan 13 22:14 /dev/tty
crw--w---- 1 u1 tty 5, 0 Jan 13 22:14 /dev/ttyp0
Trouble is, when user u1 su(1)'s to user u2, he cannot open
/dev/ttyp0 anymore because he doesn't have permission to do so.
The above fix allows him to do that.
The interesting side effect is that one was previously only able
to access the controlling tty by indirection:
date > /dev/tty
but not by name:
date > `tty`
This is now possible, and that feels a lot more like DTRT.
PR: 46635
MFC candidate: could be.
o Revision 1.38 introduced the -n flag. It conflicted with the
RB_BOOTINFO flag, so was in effect always on. Change the -n flag to
be bit 0x1c instead of 0x1f. This also had the consequence that a mal-formed
/boot.config would render the system unbootable because the user was
unable to enter anything at all on the command line.
o Remove the initialization of opt to be RB_BOOTINFO since we filter that bit
out and do not otherwise use it.
Reviewed by: jhb
MFC after: 3 days
- Don't panic on contigmalloc failure.
- Calculate timestamp by feedforward rather than feedback which depends on
unreliable interrupt timing.
- Overwrite timestamp in CIP header correctly.
- Add debug code for timestamp synchronization.
- Add comments.
ioctls are no reliable indication of the ioctls "set" or "get" nature or if
such simplistic categories can even be applied.
MFC candidate: boot0cfg issue.
Only grab giant in the per unit kthread for SWAP and VNODE backed devices.
Initialize the bioq before the kthread gets a chance to study it.
Don't lock Giant in mddone_swap, we shouldn't need it.
inconsistent when we do not do it for swap or vnode.
We still printf for preloaded disks because of the weak debugging
options people have in embedded/tiny environments where this is
usually used.
to access the pctcpu. This will have to be sorted out more later as the
new scheduler requires a procedural interface for this data. A more
complete solution will follow.
The objective being to eliminate some cases of page queues locking.
(See, for example, vm/vm_fault.c revision 1.160.)
Reviewed by: tegge
(Also, pointed out by tegge that I changed vm_fault.c before changing
vm_page.c. Oops.)
