This makes bi_load_efi_data cleaner to add common acpi setup code.
Reviewed by: imp, tsoome
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28936
Parentheses added to HASZERO macro to avoid a GCC warning, and formatted
with clang-format as we have adopted these and don't consider them
'contrib' code.
Obtained from: musl (snapshot at commit 4d0a82170a25)
Reviewed by: kib (libc integration), mjg (both earlier)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17630
Calculate font size from 16 density independent pixels (dp) by using:
size = 16 * ppi/160 * display_factor
We are specifying font size 16dp, and assuming 1dp = 160ppi.
Also apply scaling factor 2 (display_factor).
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28849
MIPS BERI boot loader is built with -mno-abicalls and -fno-pic
so prevent adding PIE-related build flags.
Fix build after 9a227a2fd6 ("Enable PIE by default on 64-bit architectures")
Obtained from: Semihalf
Sponsored by: Stormshield
Bootloaders for powerpc are not built as position independent
code. Since bsd.prog.mk is used for building, when PIE is enabled,
the PIE flags are added and that causes the build to fail.
Adding MK_PIE=no stops bsd.prog.mk from adding PIE specific flags.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: emaste
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D28893
When performing buildworld for MIPS with PIE enabled, the build fails
with "position-independent code requires '-mabicalls'" message.
-mno-abicalls and -fno-pic flags are explicitly set in MIPS ubldr
makefile, so to work around this problem, set MK_PIE=no for MIPS
ubldr.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: emaste
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D28370
Check whether we have reached the end of the buffer using search_size
instead of MULTIBOOT_SEARCH, which is the maximum defined by the
specification, but the file can be shorter than that.
This prevents printing a harmless error message when loading a file
that is smaller than MULTIBOOT_SEARCH.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Fixes: adda2797eb ('stand/multiboot2: add support for booting a Xen dom0 in UEFI mode')
Add a missing space in one error message.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Fixes: adda2797eb ('stand/multiboot2: add support for booting a Xen dom0 in UEFI mode')
If we start with console set to comconsole, the local
console (vidconsole, efi) is never initialized and attempt to
use the data can render the loader hung.
Reported by: Kamigishi Rei
MFC after: 3 days
Notable upstream changes:
778869fa1 Fix reporting of mount progress
e7adccf7f Disable use of hardware crypto offload drivers on FreeBSD
03e02e5b5 Fix checksum errors not being counted on repeated repair
64e0fe14f Restore FreeBSD resource usage accounting
11f2e9a49 Fix panic if scrubbing after removing a slog device
MFC after: 2 weeks
Do not attempt to add MODINFOMD_MODULEP to the kernel medatada on
arches that don't have it defined.
This fixes the build for arches different than amd64 after
7d3259775c.
Sponsored by: Citrix Systems R&D
Reported by: lwhsu, arichardson
Add some basic multiboot2 infrastructure to the EFI loader in order to
be capable of booting a FreeBSD/Xen dom0 when booted from UEFI.
Only a very limited subset of the multiboot2 protocol is implemented
in order to support enough to boot into Xen, the implementation
doesn't intend to be a full multiboot2 capable implementation.
Such multiboot2 functionality is hooked up into the amd64 EFI loader,
which is the only architecture that supports Xen dom0 on FreeBSD.
The options to boot a FreeBSD/Xen dom0 system are exactly the same as
on BIOS, and requires setting the xen_kernel and xen_cmdline options
in loader.conf.
Sponsored by: Citrix Systems R&D
Reviewed by: tsoome, imp
Differential revision: https://reviews.freebsd.org/D28497
This mirrors the functionality of the BIOS amd64 bi_load function,
that stashes the absolute address of the module metadata. This is
required for booting as a Xen dom0 that does relocate the modulep and
the loaded modules, and thus requires adjusting the offset.
No functional change introduced, further patches will make use of this
functionality for Xen dom0 loading.
Sponsored by: Citrix Systems R&D
Reviewed by: imp
Differential revision: https://reviews.freebsd.org/D28496
Xen requires that UEFI BootServices are enabled in order to boot, so
introduce a new parameter to bi_load in order to select whether BS
should be exited.
No functional change introduced in this patch, as all current users of
bi_load request BS to be exited. Further changes will make use of this
functionality.
Note the memory map is still appended to the kernel metadata, even
when it could be modified by further calls to the Boot Services, as it
will be used to detect if the kernel has been booted from UEFI.
Sponsored by: Citrix Systems R&D
Reviewed by: tsoome, imp
Differential revision: https://reviews.freebsd.org/D28495
While I was there:
- Fix some typos
- Fix an excessive argument "indent" reported by mandoc -Tlint
- Replace a dead link with the one suggested by
https://www.uefi.org/uefi
Submitted by: linimon (in part)
Reviewed by: bcr
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27774
We use ascii box chars with serial console because we do not know
if terminal can draw unixode box chars. Same problem is about userboot
console.
MFC after: 5 days
The VT screen buffer size is calculated based on our default
built in (8x16) font.
With high-resolution display, we want to use at least 8x16 font,
or we will have large unused areas on screen.
MFC after: 1 week
BORDER_PIXELS is left over from picking up the source from illumos
port. Since FreeBSD VT does not use border in terminal size
calculation, there is no reason why should loader use it.
MFC after: 1 week
Conout does contian the default output device name.
ConOutDev does contain all possible output device names, so we can
use it as fallback, when there is no ConOut.
PR: 253253
All callers of bi_load64 pass 0 as the addr parameter, so just remove
it and always calculate the last load address from the module chain.
No functional change.
Sponsored by: Citrix Systems R&D
Reviewed by: tsoome, imp
Differential revision: https://reviews.freebsd.org/D28412
According to the Lua 5.4 manual section 6.4.1 ("Patterns"), the interaction
between ranges and classes is not defined and hyphens must be specified at
either the beginning or the end of a set if they are not escaped.
Move all such occurrences to the beginning.
Reported-by: _parv (twitter)
MFC-after: 3 days
This eliminates a lot of stat() calls that happen when lualoader renders the
menu with the default settings, and greatly speeds up rendering on my
laptop.
ftype is nil if loader/loader.efi hasn't been updated yet, falling back to
lfs.attributes() to test.
This is technically incompatible with lfs, but not in a particularly
terrible way.
Reviewed-by: cem
MFC-after: 4 days
Differential Revision: https://reviews.freebsd.org/D27542
There's a currently ad-hoc protocol to hand off the FreeBSD kernel
payload between the loader and the kernel itself when Xen is in the
middle of the picture. Such protocol wasn't very resilient to changes
to the loader itself, because it relied on moving metadata around to
package it using a certain layout. This has proven to be fragile, so
replace it with a more robust version.
The new protocol requires using a xen_header structure that will be
used to pass data between the FreeBSD loader and the FreeBSD kernel
when booting in dom0 mode. At the moment the only data conveyed is the
offset of the start of the module metadata relative to the start of the
module itself.
This is a slightly disruptive change since it also requires a change
to the kernel which is contained in this patch. In order to update
with this change the kernel must be updated before updating the
loader, as described in the handbook. Note this is only required when
booting a FreeBSD/Xen dom0. This change doesn't affect the normal
FreeBSD boot protocol.
This fixes booting FreeBSD/Xen in dom0 mode after
3630506b9d.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D28411
This is all code only run on ARMv4 and ARMv5. Support for these have
been dropped from FreeBSD.
Differential Revision: https://reviews.freebsd.org/D28314
While loading kernel, we check if vt/vbe backend support is included in
kernel and set the tg_kernel_supported flag in gfx_state. unload
command needs to reset this flag to allow next load to perform
this check with new kernel.
Reported by: jhb
On i386, after 6c7a932d0b, the vbefb vt
driver was no longer detected by the loader, if any kernel module was
loaded after the kernel itself.
This was caused by the parse_vt_drv_set() function being called multiple
times, resetting the detection flag. (It was called multiple times,
becuase i386 .ko files are shared objects like the kernel proper, while
this is not the case on amd64.)
Fix this by skipping the set_vt_drv_set lookup if vbefb was already
detected.
Reviewed by: tsoome
efi, like the various ${MACHINE} directories, should have a dependency on
the enabled interpreters.
The general rule here is that any top-level directory that has a program at
any depth within that includes loader.mk should add ${INTERP_DEPENDS} added
to its dependencies so that the appropriate ficl/lua bits are ready before
they begin.
Note that the only directories in-tree that require it but will not get it
in a more appropriate manner are i386 (on amd64), efi, and userboot. i386
and userboot are handled explicitly in Makefile.amd64 where they are added
to S.yes.
Reported-by: bcran
MFC-after: 3 days
lualoader was previously not processing \ as escapes; this commit fixes
that and does better error checking on the value as well.
Additionally, loader.conf had some odd restrictions on values that make
little sense. Previously, lines like:
kernel=foo
Would simply be discarded with a malformed line complaint you might not
see unless you disable beastie.
lualoader tries to process these as well as it can and manipulates the
environment, while forthloader did minimal processing and constructed a
`set` command to do the heavy lifting instead. The lua approach was
re-envisioned from building a `set` command so that we can appropriately
reset the environment when, for example, boot environments change.
Lift the previous restrictions to allow unquoted values on the right hand
side of an expression. Note that an unquoted value is effectively:
[A-Za-z0-9-][A-Za-z0-9-_.]*
This commit also stops trying to weirdly limit what it can handle in a
quoted value. Previously it only allowed spaces, alphanumeric, and
punctuation, which is kind of weird. Change it here to grab as much as it
can between two sets of quotes, then let processEnvVar() do the needful and
complain if it finds something malformed looking.
My extremely sophisticated test suite is as follows:
<<EOF
X_01_simple_string="simple"
X_02_escaped_string="s\imple"
X_03_unquoted_val=3
X_04_unquoted_strval=simple_test
X_05_subval="${X_03_unquoted_val}"
X_06_escaped_subval="\${X_03_unquoted_val}"
X_07_embedded="truth${X_03_unquoted_val}"
X_08_escaped_embedded="truth\${X_03_unquoted_val}"
X_09_unknown="${unknown_val}"
X_10_unknown_embedded="truth${unknown_val}"
X_11_crunchy="crunch$unknown_val crunch"
X_12_crunchy="crunch${unknown_val}crunch"
Y_01_badquote="te"lol"
Y_02_eolesc="lol\"
Y_02_noteolesc="lol\\"
Y_03_eolvar="lol$"
Y_03_noteolvar="lol\$"
Y_04_badvar="lol${"
exec="echo Done!"
EOF
Future work may provide a stub loader module in userland so that we can
formally test the loader scripts rather than sketchy setups like the above
in conjunction with the lua-* tools in ^/tools/boot.
There is no need to keep multiple copies of the relocation code. The
amd64 code works on arm64 with a few small changes to relocation types.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28213
Handle malloc failures in vbe_init().
If it should so happen and we do get malloc failure in vbe_init(),
use original mode list.
Replace nitems with nentries to have naming consistency and avoid
confusion with nitems() macro.
Reported by: yuripv, rpokala
Even if it didn't behave well previously this is fixed.
Tested on: OrangePi One (armv7 u-boot) (serial only and serial + HDMI)
Tested on: Pine64-LTS (aarch64 u-boot) (serial only and serial + HDMI)
Tested on: Honeycomb (aarch64 EDK2) (serial only)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D28153
Some systems may provide multiple GOP instances and not all are
bound to hardware. The current loader is picking up the first GOP,
which may not be usable. Instead we load the GOP handle array,
and test every handle to have registered ConOut protocol. If ConOut is
present, we can use this GOP handle to open GOP protocol.
This fixes the positioning of the "Welcome to FreeBSD" heading, which was
misplaced after the recent update to Lua 5.4. The issue was previously
masked by a compatibility knob in Lua 5.3 that would cause float-tagged
numbers to render faithfully without the decimal component. Lua 5.4 dropped
that and ensures that it always prints a decimal component, even if it has
to append a ".0" to the value.
Standard division produces a "float", floor division (//) can be used to
guarantee an integer. Floating point operations have been completely ripped
out of the liblua compiled for the bootloader, so this is a nop. This is
decidedly better than trying to hack out the float tag entirely.
Reported-by: mjg, probably others
MFC-after: 3 days
Caller is not interested in symlinks follow them.
Throw an error if too many links encountered.
Reviewed by: stevek
Sponsored by: Juniper Networks
--This line, and those below, will be ignored--
> Description of fields to fill in above: 76 columns --|
> PR: If a GNATS PR is affected by the change.
> Differential Revision: https://reviews.freebsd.org/D### (*full* phabric URL needed).
> Submitted by: If someone else sent in the change.
> Reviewed by: If someone else reviewed your modification.
> Approved by: If you needed approval for this commit.
> Obtained from: If the change is from a third party.
> MFC after: N [day[s]|week[s]|month[s]]. Request a reminder email.
> MFH: Ports tree branch name. Request approval for merge.
> Relnotes: Set to 'yes' for mention in release notes.
> Security: Vulnerability reference (one per line) or description.
> Sponsored by: If the change was sponsored by an organization.
> Empty fields above will be automatically removed.
Change-Id: I4ef92ff256f503c620dc5bba79ed93b32cb2330d
We do select font based on desired terminal size, we do query
UEFI terminal size with conout->QueryMode(), but by mistake, the fallback
values are used.
Pass gfx_state to efi_find_framebuffer(), so we can pick between
GOP and UGA in efi_find_framebuffer(), also we can then
set up struct gen_fb in gfx_state from efifb and isolate efi fb data
processing into framebuffer.c.
This change does allow us to clean up efi_cons_init() and reduce
BS->LocateProtocol() calls.
A little downside is that we now need to translate gen_fb back to
efifb in bootinfo.c (for passing to kernel), and we need to add few
-I options to CFLAGS.
hw.vga.textmode is directing VT VGA backend to use text mode.
The default screen mode for BIOS loader is text, and default
screen mode for VT VGA backend is graphics (unless we are running on
hypervisor or hw.vga.textmode is set to 1). Using hw.vga.textmode
for loader does remove possibility to have graphical mode VT VGA with
text mode loader.
screen.textmode can have possible values "0" to disable text mode,
and "1" to set text mode.
Instead of trying to set reasonable register values, save significant
register values, then prepare for font upload and then restore
registers from saved data.
This seems to fix text mode for most cases where text mode breakage
was reported.
Draw console on efi.
Add vbe framebuffer for BIOS loader (vbe off, vbe on, vbe list,
vbe set xxx).
autoload font (/boot/fonts) based on resolution and font size.
Add command loadfont (set font by file) and
variable screen.font (set font by size). Pass loaded font to kernel.
Export variables:
screen.height
screen.width
screen.depth
Add gfx primitives to draw the screen and put png image on the screen.
Rework menu draw to iterate list of consoles to enamble device specific
output.
Probably something else I forgot...
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27420
Previously having ficl/liblua in LIB32LIST with their respective option
turned OFF would be relatively harmless, as we wouldn't act on it unless we
were building the non-32 variant. As of ac5f382a9d, however, these are
now used for dependencies in some cases and must reflect what's actually
going to be built.
buildworld already runs the stand build in parallel[1], so make it easier to
identify ordering issues by properly establishing dependencies or adding
.WAIT where needed.
Everything in stand/ relies on libsa, either directly or indirectly, because
libsa build is where the stand headers get installed and it gets linked in
most places.
Interpreters depend on their libs, machine dirs usually depend on top-level
libs that are getting built and at least one of the interpreter flavors.
For i386, order btx/libi386/libfirewire before everything else using a
big-ol-.WAIT hammer. btx is the most common dependency, but the others are
used sporadically. This seems to be where the race reporting on the mailing
list is- AFAICT, the following sequence is happening:
1.) One of the loaders gets built based on stale btx/btxldr
2.) btx/btxldr gets rebuilt
3.) installworld triggers loader rebuild because btx was rebuilt after
This seems like the most plausible explanation, as they've verified system
time and timestamps.
While we're here, let's switch stand/ over to a completely parallel build so
we can work out these kinds of issues in isolation rather than in the middle
of a larger build.
Reviewed by: bdragon, sjg, tsoome
Tested by: bdragon (-j1024, no failures, significant speed improvement)
Differential Revision: https://reviews.freebsd.org/D23411
loader_conf_dirs is the supporting mechanism for the included
/boot/loader.conf.d directory. When lualoader finishes processing all of
the loader_conf_files it finds after walking /boot/defaults/loader.conf,
it will now check any and all loader_conf_dirs and process files ending
in ".conf" as if they were a loader.conf.
Note that loader_conf_files may be specified in a loader.conf.d config
file, but loader_conf_dirs may *not*. It will only be processed as specified
in /boot/defaults/loader.conf and any loader_conf_files that were loaded
from there.
Reviewed by: allanjude, freqlabs, rpokala, tsoome
Includes suggestion from: imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25608
luacheck rightfully complains that i is unused in the show-module-options
loop at the end (it was used for some debugging in the process).
We've added a new pager module that's compiled in, so declare that as an
acceptable global.
This effectively dumps everything lualoader knows about to the console using
the libsa pager; that particular lua interface was added in r368591.
A pager stub implementation has been added that just dumps the output as-is
as a compat shim for older loader binaries that do not have lpager. This
stub should be moved into a more appropriate .lua file if we add anything
else that needs the pager.
Without this we risk having the .interp section be placed earlier in the
file and mess with section offsets; in particular it has been seen to be
placed at the start of the file and cause the PE/COFF header to not be
at address 0. This is the same fix as was done for arm64 in r365578.
Reviewed by: mhorne, imp
Approved by: mhorne, imp
Differential Revision: https://reviews.freebsd.org/D27603
For the first second otime and ntime are equal so no message gets
printed. Instead we should print the countdown right from the start,
although we do it at the end of the first iteration so that if a key has
already been pressed then the message is suppressed.
Reviewed by: imp
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D26935
This is nearly a 1:1 mapping of the pager API from libsa. The only real
difference is that pager.output() will accept any number of arguments and
coerce all of them to strings for output using luaL_tolstring (i.e. the
__tostring metamethod will be used).
The only consumer planned at this time is the upcoming "show-module-options"
implementation.
MFC after: 1 week
Specifically, we have:
- enable-module
- disable-module
- toggle-module
These can be used to add/remove modules to be loaded or force modules to be
loaded in spite of modules_blacklist. In the typical case, a user is
expected to use them to recover an issue happening due to a module directive
they've added to their loader.conf or because they discover that they've
under-specified what to load.
MFC after: 1 week
The integer arrays are encoded in nvlist as counted array <count, i0, i1...>,
loader xdr_array() is missing the count. This will affect the pool import when
there are hole devices in pool.
Also fix the new data add and print functions.
Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
Pad in forth is used as "scratchpad" and internal implementations
should not use it. Ficl does not really follow this rule and this can fire back.
emit has no need to use pad, we can use local variable instead.
i386 and the rest of supported architectures by defining KERNLOAD in the
vmparam.h and getting rid of magic constant in the linker script, which albeit
documented via comment but isn't programmatically accessible at a compile time.
Use KERNLOAD to eliminate another (matching) magic constant 100 lines down
inside unremarkable TU "copy.c" 3 levels deep in the EFI loader tree.
Reviewed by: markj
Approved by: markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27355
We don't have NEON available in the boot loader, so we have to disable
it. OpenZFS included ZSTD which used the wrong symbol to bring in neon
support. Change to use the code that's been submitted upstream as a
pull request to both.
__ARM_NEON is the proper symbol, defined in ARM C Language Extensions
Release 2.1 (https://developer.arm.com/documentation/ihi0053/d/). Some
sources suggest __ARM_NEON__, but that's the obsolete spelling from
prior versions of the standard.
OpenZFS Pull Request: https://github.com/openzfs/zfs/pull/11055
ZSTD Pull Request: https://github.com/facebook/zstd/pull/2356
We are using asize property from pool label and we do not depend
on partition data to find last two pool labels and to validate LBA for disk IO.
This does allow us to re-enable support for partitionless disk setups.
In some environments is difficult to access bootp/dhcp
configuration as "standard user". Add a command that allows to set
or display the URI of the network server used as "net:" device.
Currently only tftp and nfs protocols are supported.
Typical usage pattern is:
netserver tftp://192.168.168.1/path_to_obj_dir/arm.armv7/sys/GENERIC/
boot net:kernel
Reviewed by: imp, kevans
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D26736
On startup the arm64 efi loaders need to know PC-relative addresses.
Previously we used the adr instruction to find this address, however this
instruction is limited to +/- 1MiB.
Switch to adrp to find the 4k page the address is within and an add to
set the bottom 12 bits. This lets us address +/- 4GiB which should be
large enough for now.
Reported by: imp
MFC after: 2 weeks
Sponsored by: Innovate UK
The OpenZFS code that uses the BMI instructions is broken. Forcibly
disable them to prevent their use. When enabled, the build breaks.
This fixes the build when compiled for a core with BMI instructions.
This is the same fix committed in r364777, for the same issue.
Submitted by: Jung-uk Kim
Add support to the _STANDALONE environment enough bits of the kernel
that we can compile it. We still have a small zstd_shim.c since there
were 3 items that were a bit hard to nail down and may be cleaned up
in the future. These go hand in hand with a number of commits to
sys/sys in the past weeks, should this need be MFCd.
Discussed with: mmacy (in review and on IRC/Slack)
Reviewed by: freqlabs (on openzfs repo)
Differential Revision: https://reviews.freebsd.org/D26218
This was causing build failures in CheriBSD where we were passing -pie
already by default.
Reviewed By: andrew
Differential Revision: https://reviews.freebsd.org/D24787
The EDD v3[1], see table 13, page 33, does define device path as double
qword, that is, 16 bytes, we have only qword.
Also remove edd_device_path_v4 and edd_params_v4 because those are not used,
and there is no size difference in v3 versus v4.
[1] http://www.t13.org/documents/UploadedDocuments/docs2004/d1572r3-EDD3.pdf
MFC after: 2 weeks
- whitespace at end of input line
- skipping paragraph macro: Pp at the end of Sh
- new sentence, new line
- consider using OS macro: Fx
- AUTHORS section without An macro
- skipping paragraph macro: Pp before Ss
In the previous world order, any brand/logo was forced to pull in the
drawer and call drawer.add{Brand,Logo} with the name their brand/logo is
taking and a table describing it.
In the new world order, these files just need to return a table that maps
out graphics types to a table of the exact same format as what was
previously being passed back into the drawer. The appeal here is not needing
to grab a reference back to the drawer module and having a cleaner
data-driven looking format for these. The format has been renamed to 'gfx-*'
prefixes and each one can provide a logo and a brand.
drawer.addBrand/drawer.addLogo will remain in place until FreeBSD 13, as
there's no overhead to them and it's not yet worth the break in
compatibility with any pre-existing brands and logos.
Reviewed by: freqlabs
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24966
OpenZFS will start using some of the kernel timekeeping bits
shortly. This implements the bare minimum of that which currently
is just the time_seconds variable.
Report what console the boot loader is telling the kernel to use:
o Dual (Serial Primary)
o Dual (Video Primary)
o Serial
o Video
This allows the user to interrupt the boot and tweak the cosnole, if
needed, in a trivial way. Useful for installs where the default
selected may not be quite what you want, or when you are running a
dual setup and need to toggle over to the other console being primary.
The 'c'/'C' keys will do the cycling through the consoles. Note:
you'll still have to drop into the loader to set details about serial
consoles. And this doesn't change the console the loader is using.
Reviewed by: kevans@
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D26573
The video on PCI heuristic was broken. It was supposed to infer a
video device when the last element of the path was a PCI DEVICE PATH
node. However, the last node in the device path is an END node, so
this heuristic never fired.
This leads, among other things, to bhyve only producing output in the
serial connection once we leave the boot loader. This restores the
dual headed boot on bhyve + UEFI (as we did in 11.2), but will favor
serial in the absence of other config which may be a change from 11.2.
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D26572
During devswitch probe, we pick boot pool based on boot disk, if the boot
disk happens to have multiple pools in freebsd-zfs partitions, the current
code does pick last pool from boot disk as boot pool. While there is no
way at that stage to test, the more logical approach would be to pick
first matching pool.
This patch is assuming we do pass pool guid pointer with guid value 0,
this will help us to determine, if the guid value is already set or not.
The general suggestion would be not to share disk between different pools.
Reported by: Alexander Leidinger
There was a small window cp was broken. Work around this by using :>
instead of cp /dev/null. Ideally, we'd keep the cp /dev/null in the
build as a regression test, but doing so breaks people that upgraded
during the cp breakage and this is simpler than bootstrapping a
working cp since there's no good __FreeBSD_version sign posts for
that.
Suggested by: lots of people
Too stubborn for his own good: imp
This is the initial set up for PowerPC64LE.
The current plan is for this arch to remain experimental for FreeBSD 13.
This started as a weekend learning project for me and kinda snowballed from
there.
(More to follow momentarily.)
Reviewed by: imp (earlier version), emaste
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26399
I had overthought how to do the FICL_TRUE change. We do not need to
explicitly specify how big the 0 is before the cast to the correct size.
The same change was suggested by both imp@ and Gunther Nikl independently.
Tested on powerpc.
Reported by: imp, Gunther Nikl
Extend the powerpc relative relocation handling from r240782 to a
handful of other architectures. This is needed to properly read
dependency information from kernel modules.
Reviewed by: jhb
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26365
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
In D12421, the ability to compile stand/ in little-endian was added, with the
intention to extend loader.kboot to run in Petitboot.
However, no further work was done, as the kernel then gained self-execution
capabilities as Petitboot was taught to load FreeBSD kernels directly.
The FreeBSD installer on powerpc64 (on POWER8 and POWER9) uses
/boot/etc/kboot.conf instead of loader.
As this option does nothing but cause stand/ to be miscompiled and actively
causes confusion, remove it.
(I have a functioning petitboot loader in my local tree, however, it turned
out to be quite inconvient to use due to the current petitboot plugin design
so I put it on hold.)
Reviewed by: emaste, imp, jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26430
Currently, the only thing that prevents a functioning 64-bit FICL build is
a few integer types that were intended to be fixed-width.
Changing them to C99 integer types allows building a functioning 64-bit
FICL.
While this isn't applicable to the default settings of any in-tree loaders,
it is necessary for a future Petitboot loader, due to the requirement that
it be compiled as a 64-bit program.
Reviewed by: tsoome, imp (earlier revision)
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26364
This would allow interested parties to do experimental runs with an
environment set appropriately to raise all the warnings throughout the
build; e.g. env WARNS=6 NO_WERROR=yes buildworld.
Not currently touching the numerous instances in ^/tools.
MFC after: 1 week
When building the loader an unneeded .interp section may be added. Move
this to the unused section region so offsets of used sections don't
change.
Obtained from: CheriBSD
Sponsored by: Innovate UK
A bug in the EFI HTTP driver of TianoCore EDK2 causes memory
corruption when an http instance that uses tls is reconfigured,
leading to a crash.
Work around this by forcing a new http instance for each request
instead of reconfiguring the existing one.
The upstream bug report is https://bugzilla.tianocore.org/show_bug.cgi?id=1917
Submitted by: bcran
Reviewed By: imp, kevans, tsoome
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21281
Adjust a couple of printf() lines that deal with dumping out addresses
to cast to uintmax_t.
This allows building a 64-bit libofw for use in things like a future
Petitboot loader for PowerPC64, and other FDT platforms that require
a 64-bit loader binary and want to use forth.
Sponsored by: Tag1 Consulting, Inc.
OZFS is the top of the OpenZFS tree (aka src/sys/contrib/openzfs).
ZFSOSSRC is the path to the OepnZFS sources
ZFSOSINC is the path to the OepnZFS includes
MFC After: 3 days
Move hexdump from stand/common/misc.c to stand/libsa/hexdump.c
(svn cp)
Disable use of pager - causes linking issue for boot1
can be re-enabled by defining HEXDUMP_PAGER.
Reviewed by: stevek, imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D26235
Some external code requires a specific set of include paths to work
properly since it emulates the typical environment the code is used
in. Enable this by creating a CFLAGS_EARLY.file variable that can be
used to build this stack. Otherwise the include stack we build for
stand programs may get in the way. Code that uses this feature has to
tolerate the normal stack of inclues being last on the list (and
presumably unused), though.
Generally, it it should only be used for the specific include
directories. Defines and that sort of thing should be done in the
normal CFLAGS variable. There is a global CFLAGS_EARY hook as well for
everything in a Makefile.
Please note that neither zstd nor encryption is
supported by the loader at this instant. This
change makes it safe to use those features in
one's root pool, but not in one's root dataset.
This is a change in preparation for stopping to use lorder.sh (D26044) and
instead assume that we have a linker newer than ~1990. Without lorder.sh
duplicates end up being passed to the linker when building .so files and this
can result in duplicate symbol definition errors.
There is one minor change: libcompiler_rt.a will no longer provide
gcc_personality_v0 and instead we now only have it in libgcc_eh.a/libgcc_s.so.
This matches GCC's behaviour.
Reviewed By: emaste, cem
Differential Revision: https://reviews.freebsd.org/D26042
than command in the loader.conf, the latter needs to be nul terminated,
otherwise garbage trailer left from zfs_nextboot() will be passed to
parse_cmd() together with loader.conf command.
While here, reset cmd to empty string if read() returns error.
Reviewed by: tsoome
It can be useful to know what type of machine we are running on for desktop
related thing.
It also allow us to support all the DMI variable that linux driver can fetch.
MFC after: 1 week
Sponsored by: Sponsored-by: The FreeBSD Foundation
