Poul-Henning Kamp
896dba5a0c
Fix a braino in ccd's clone routine.
...
Submitted by: tegge
2001-01-29 06:18:14 +00:00
Kenneth D. Merry
75fab00593
Back out rev 1.102. The IBM DNES drives work fine for me, jedgar and other
...
folks.
My guess is that reducing the number of tags is just masking the real
problem for the PR submitter. I'll re-open the PR and see if I can work
with the submitter to diagnose the problem.
PR: 21139
2001-01-29 05:33:14 +00:00
Marcel Moolenaar
5bcc1e51a0
Don't hard-code alignment and data declarations valid for 64-bit
...
machines (duh!). This was one reason why this script broke on
i386. The other being that on i386 sections did not have the
proper alignment. This has been fixed in sys/sys/linker_set.h.
2001-01-29 01:55:54 +00:00
Marcel Moolenaar
d2d42f89d5
o Add explicit alignment to linker set definitions. On i386, data
...
declarations will not be aligned by default.
o Remove the alignment work-around for alpha. Our current alpha
as(1) does not assume alignment after section switching, nor
does the ia64 as(1).
2001-01-29 01:46:50 +00:00
Brian Somers
4834b77d04
Ignore leading witespace in the string given to PacketAliasProxyRule().
2001-01-29 00:30:01 +00:00
Kenneth D. Merry
0212e4b63b
Fix region code reporting.
...
Reported by: Andrew Gordon <arg@arg1.demon.co.uk>
2001-01-28 21:43:17 +00:00
Marcel Moolenaar
8e8cae2b0c
Revert previous commit. I messed up my testing.
2001-01-28 21:24:05 +00:00
Poul-Henning Kamp
c93849206e
Remove devstat entries in mddelete()
...
Spotted: tegge
2001-01-28 20:55:55 +00:00
Gerard Roudier
3c9013e257
A couple of chip errata work-arounds refined:
...
- When used on a 33MHz PCI BUS, the 53C1010-66 revision 0
requires extra clocks to be inserted in data out phase.
Revision 1 is fixed.
- The 53C1010-33 revision 1 requires internal cycles to be
disabled due to possible contentions on IO registers.
Revision 2 is fixed.
Fix:
- The probing of HVD from GPIO3 bit by the driver was reversed.
The driver could misprobe the bus mode of a 825 or 875 chip
that was not previously initialized (no BIOS for example).
2001-01-28 19:58:21 +00:00
Poul-Henning Kamp
73cee67c0e
Remove an outdated DEVFS non-description.
2001-01-28 19:32:23 +00:00
Jake Burkholder
07ce8269b1
Clear intr_nesting_level when an interrupt thread has no more
...
handlers and wants to exit, so it doesn't panic in exit1()
which malloc()s with M_WAITOK.
Reported by: Bob Bishop <rb@gid.co.uk>
2001-01-28 17:20:11 +00:00
Julian Elischer
d30293b3ff
Add a new distribution algorythm to the 'one2many' node type.
...
The new method is 'flood' (in addition to the old round-robin)
in which incoming packets are sent to more than one outgoing hook.
(I'm not sure what Rogier is using this for but it seems generally useful
and isn't much extra)
Submitted by: Rogier R. Mulhuijzen (drwilco@drwilco.net )
2001-01-28 15:37:06 +00:00
KATO Takenori
9ec492e57b
Merged from sys/i386/isa/npx.c revisions 1.88 and 1.89.
2001-01-28 12:31:03 +00:00
KATO Takenori
c30d5afab4
Synced with sys/i386/i386/machdep.c revision 1.436.
2001-01-28 11:06:28 +00:00
Marcel Moolenaar
cd682c042d
Add gd_witness_spin_check.
2001-01-28 08:06:50 +00:00
Marcel Moolenaar
079c9adfc4
Fix typo.
2001-01-28 08:05:55 +00:00
Marcel Moolenaar
136345c019
Improve kernel bootstrapping:
...
o Use objdump instead of gensetdefs(1) to build the linker sets.
o Allow overriding of nm and objdump in resp. genassym.sh and
gensetdefs.pl for non-native toolchains.
Reviewed by: arch
Perl improvements: Jos Backus <josb@cncdsl.com>, benno
2001-01-28 06:39:56 +00:00
Bosko Milekic
84e11fbc2e
Move the setting of curproc to idleproc up earlier in ap_init(). The
...
problem is that a mutex lock, prior to this change, is acquired before
the curproc is set to idleproc, so we mess ourselves up by calling
the mutex lock routine with curproc == NULL.
Moving it up after the aps_ready spin-wait has us hopefully setting it
after idleproc is setup.
Solved by: jake (the allmighty) :-)
2001-01-28 03:41:01 +00:00
Tor Egge
48bed92485
Defer assignment of low level interrupt handlers for PCI interrupts
...
described in the MP table until something asks for the interrupt number
later on.
2001-01-28 01:07:54 +00:00
Dag-Erling Smørgrav
9fa2ef3da2
Remove an assertion I forgot to remove in the previous commit: sbuf_len()
...
may now be called with an unfinished sbuf.
For consistency, copy the related comment from sbuf_delete() to sbuf_clear()
and sbuf_len().
2001-01-28 00:33:58 +00:00
Dag-Erling Smørgrav
4dc1413915
Add sbuf_clear() and sbuf_overflowed().
...
Move the helper macros from sbuf.h to sbuf.c
Use ints instead of size_ts.
Relax the requirements for sbuf_finish(): it is now possible to finish an
overflowed buffer.
Make sbuf_len() return -1 instead of 0 if the sbuf overflowed.
Requested by: gibbs
2001-01-28 00:13:01 +00:00
Andrew Gallatin
28c039e747
The API UP1100 is close enough to a UP1000 that FreeBSD just works on it, so
...
document that fact.
Thanks to Peter Petrakis <ppetrakis@alphalinux.org> for doing a test boot.
2001-01-27 20:56:00 +00:00
Justin T. Gibbs
64a3876fef
Update Copyright notices for new year. (should have been in last commit).
2001-01-27 20:54:24 +00:00
Yoshihiro Takahashi
5774351e81
Merged from sys/isa/sio.c revision 1.320.
2001-01-27 13:02:06 +00:00
John Baldwin
cf0be84ff5
Turn on DEVFS by default for the alpha. Aside from vinum as mentioned by
...
phk it should work fine. If you need vinum, then don't add this to your
kernel config until vinum catches up to DEVFS.
2001-01-27 08:34:58 +00:00
Poul-Henning Kamp
b0254d109c
Turn DEVFS on by default.
...
You may need to turn this off if you you vinum. Apart from that I know of
no reason not to run with DEVFS.
2001-01-27 08:18:36 +00:00
John Baldwin
d38b8dbfc8
Add a new ddb command 'witness_list' that lists the mutexes held by
...
curproc.
Requested by: peter
2001-01-27 07:51:34 +00:00
Peter Wemm
0fee3d3550
p->p_intr_nesting_level is MI now and initialized to 0 in kern_fork.c,
...
so it should be save to KASSERT() on it even on an arch that may not
use it.
2001-01-27 06:32:20 +00:00
Peter Wemm
bc234bdcac
Bah, as my luck would have it, I had a kernel source tree in the window
...
while strlcpy() existed, before it got backed out due to an extended
bikeshed argument. Sigh. Back to the old version with the redundant
code to terminate the string. :-(
2001-01-27 06:01:48 +00:00
Peter Wemm
d2e32c6770
Use strlcpy() in TUNABLE_STR_xxx() and avoid an off-by-one.
...
Noticed by: dfr
2001-01-27 05:43:58 +00:00
Luigi Rizzo
f8acf87bb5
Make sure we do not follow an invalid pointer in ipfw_report
...
when we get an incomplete packet or m_pullup fails.
2001-01-27 02:31:08 +00:00
John Baldwin
ba88dfc733
Back out proc locking to protect p_ucred for obtaining additional
...
references along with the actual obtaining of additional references.
2001-01-27 00:01:31 +00:00
John Baldwin
f0ae4fa2db
- Back out over-aggressive locking of p->p_cred.
...
- Back out locking ucred's and bumping refcounts for vnode operations.
2001-01-26 23:54:40 +00:00
John Baldwin
8865286b9c
Fix fork_exit() to take a pointer to a function that returns void as its
...
first argument rather than a function that returns a void *.
Noticed by: jake
2001-01-26 23:51:41 +00:00
John Baldwin
a0346459f1
Update some comments, s0 in the pcb of a child returning from fork1() is
...
now passed in as a0 to fork_exit() and and s2 is passed in as a1.
2001-01-26 23:32:38 +00:00
Luigi Rizzo
26fb17bdd0
Minor cleanups after yesterday's patch.
...
The code (bridging and dummynet) actually worked fine!
2001-01-26 19:43:54 +00:00
Doug Rabson
038f285f72
Initialise proc0.p_heldmtx and proc0.p_contested and call
...
mtx_enter(&Giant, MTX_DEF) after Giant is initialised.
Reviewed by: jhb
2001-01-26 17:52:34 +00:00
Andrew Gallatin
97e32dadb4
The osfulator needs sysvipc to work. Thanks to DES's commit to
...
the i386 linulator for pointing this out.
The alpha linulator doesn't need a dependancy, as it already
depends on the osfulator.
2001-01-26 17:12:30 +00:00
Hellmuth Michaelis
4a29e8f92b
Add experimental support for Eicon.Diehl DIVA 2.0 and 2.02 ISA PnP cards.
2001-01-26 13:22:18 +00:00
Hellmuth Michaelis
d04d012625
Add experimental support for Eicon.Diehl DIVA 2.0 and 2.02 ISA PnP cards.
...
Thanks a lot to Jakob Schripsema (sch@kpn.com ) for pointing out similarities
of the Eicon 2.02 to the Siemens I-surf driver !
2001-01-26 13:16:11 +00:00
Hellmuth Michaelis
8567e1d3e2
Add experimental support for Eicon.Diehl DIVA 2.0 and 2.02 ISA PnP cards.
...
Increment i4b minor revision (=step) so a buildworld or a make install in
/usr/src/sys/include is necessary to get isdnd and i4b kernel parts in sync.
2001-01-26 13:12:56 +00:00
Julian Elischer
0633aaefef
Swap egress hooks for packets entering from the monitor hooks.
2001-01-26 11:35:36 +00:00
Luigi Rizzo
6258acf88f
Bring dummynet in line with the code that now works in -STABLE.
...
It compiles, but I cannot test functionality yet.
2001-01-26 06:49:34 +00:00
Luigi Rizzo
c353c285ee
Bring bridging code in line with the one which works on -STABLE.
...
It compiles on -CURRENT, but I can not test functionality yet.
2001-01-26 06:47:19 +00:00
Jake Burkholder
28df158b49
Push Giant down into the trap handlers that need it, instead of
...
acquiring it unconditionally.
Reviewed by: jhb
2001-01-26 04:16:16 +00:00
John Baldwin
21bd1ed3bf
- Don't pass in MTX_NORECURSE, as that is only used with spin mutexes and
...
is going away soon anyways. Instead, don't pass MTX_RECURSE to mtx_init,
so that WITNESS will panic if the driver mutex is recursed on.
- Use MTX_DEF in mtx_init() instead of assuming that it will be 0.
2001-01-26 03:18:17 +00:00
Luigi Rizzo
02a282ac01
Comment the interface to ether_input() and the way is normally
...
used by most ethernet drivers.
2001-01-25 23:56:13 +00:00
Julian Elischer
34f9ca0908
Only clear the 'free' bit if we were successful in getting a queue item off the free list.
...
Found by: Harti Brandt (address unknown)
2001-01-25 19:48:57 +00:00
John Baldwin
b00df9c9ba
Whitespace fix: convert code indented 6 spaces to use tabs instead.
2001-01-25 19:37:26 +00:00
Nicolas Souchu
a138e28335
Discard extra status information if -1. This has been breaking the
...
PS/2 mode for ZIP+ drives for a long time. Thanks Jonathon.
Submitted by: j mckitrick <jcm@FreeBSD-uk.eu.org>
2001-01-25 13:07:55 +00:00