shadow FB size could be rather large and depends on resolution,
instead of using heap, allocate dedicated space outside of heap.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D33600
MFC after: 2 weeks
On boot we don't need to perform any CPU cache management when the IDC
and DIC fields in the ctr_el0 register are set. Add a command to tell
loader to ignore these fields. This could be useful, for example, if the
hardware is misreporting the values and we are missing a quirk to enable
it.
It is not expected this will be needed, but is only intended as a
workaround to ensure the kernel can still boot.
Sponsored by: The FreeBSD Foundation
In the arm64 loader we need to syncronise the I and D caches. On some
newer CPUs the I and D caches are coherent so we don't need to perform
these operations.
While here remove the arguments to cpu_inval_icache as they are unneeded.
Reported by: cperciva
Tested by: cperciva
Sponsored by: Innovate UK
Kernel needs physical frame buffer address and size, which Block
Transfer-only Graphics Output Protocol instances do not have.
Some recent ASUS boards like PRIME Z690M-PLUS D4 and PRIME H570-Plus
report two GOPs, out of which the second one support ConOut protocol,
that made it preferable, but is BLT-only, that made console unusable.
Discussed with: tsoome (previous version)
MFC after: 1 week
Otherwise on fs like tftp where no directory listing is possible we fail
on the .dir method.
Reviewed by: imp, kevans
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33414
Use %j to it works on 64 and 32 bits system.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33430
The preload method will transfer the whole file in a buffer and cache it
so read/lseek operations are faster.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33410
When we load an ELF file (kernel or module) we do seek(2) a lot to
parse/load the different sections of the ELF file.
Protocol like TFTP suffers a lot from this as there is no resume or
a way to start the tranfer from a specified offset in the file.
fs_preload is added to help those protocol.
Call preload just after opening the ELF file that we need to load so
the underlying method can cache the hole file and then read/lseek operations
are faster.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33409
getsecs is very costly, reuse the values we got before.
Fetching a ~30MB kernel with the tftp command use to take ~26 seconds
and now it's ~18 seconds.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33408
When we load a kernel or module we open/close it a few times.
Since we're using the same port number each time and that we requested
the same file the ACK that we send are valid on the server side and the
server send us the file multiple times.
This makes tftp loading time very inconsistant due to the UDP "flood" that
we have to process.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33407
readtest will simply load the file in memory, useful for timing
loading on some filesystems.
Reviewed by: tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33411
tftp-hpa sends NAK with tftp error set to 0 when trying to get
a directory and this is the first thing that loader tries to do
and this make it hangs.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33406
We never use 'dev' after fetching it from the varargs list. Skip the
whole bother of fetching it, or setting up the meachinery to fetch it.
Sponsored by: Netflix
Build uboot ubldr and friends like we build efi binaries
o move everything to be under stand/uboot
o md code goes in arch/$ARCH
o move everything over from the library
- Had to rename console.c, disk.c and module.c due to conflicts
o update version to 1.5 to reflect the new way of building
This results in a more consistent build system and should represent no
functional change, apart from powerpc version getting new help
file. Also, moved to exlcuding uboot on powerpc64le by using
BROKEN_OPTION instead of the incidental exclusion we had before due to
Makefile reorgs.
Sponsored by: Netflix
Feedback by: stevek, jrtc27
Differential Revision: https://reviews.freebsd.org/D33362
All these files are the same, modulo one comment. Move them all into
common/gfx_fb_stub.c and adjust Makefiles accordingly.
Sponsored by: Netflix
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D33428
Store whether or not we found a vbefb module (eg, a tg supported kernel)
in the preloaded_file structure. This automatically resets on reload and
eliminates load_elf knowing about any gfx_* interface. Restrict this to
i386, which is the only place it's used. Update libi386 to check in the
preloaded_file struct. Eliminate this from the teken_gfx
structure. Rewrite the parsing code to be more inline. Check this from
the same place we check for a relocatable amd64 kernel.
Sponsored by: Netflix
Reviewed by: manu, tsoome
Differential Revision: https://reviews.freebsd.org/D33427
Reading from Write Combining memory can be very-very slow. Try to use
shadow buffer to avoid such reads.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33305
As part of decommissioning mips support, remove the boot loader
support. Do this in advance of other boot loader work to limit the
amount of work that will be thrown away.
Sponsored by: Netflix
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D33377
The elf loader needs to know how to reach into the gfx_fb code, so
simplify how we include files to find that stuff.
Sponsored by: Netflix
Reviewed by: manu, tsoome
Differential Revision: https://reviews.freebsd.org/D33376
Move direct call of ExitBootServices to efi_exit_boot_services. This
function sets boot_services_active to false so callers don't have to do
it everywhere (though currently only loader/bootinfo.c is affected).
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D32226
This makes GOP not probed on some situation (AMD Card on PCIe slot
with EDK2 as we have a SERIAL_IO_PROTOCOL compatible uart).
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D32992
Sponsored by: Beckhoff Automation GmbH & Co. KG
Printing the EFI_HANDLE pointer isn't very useful.
If the handle have a IMAGE_DEVICE_PATH or a DEVICE_PATH protocol print it.
This makes it easier to see which devices are present and what protocol they
expose.
Reviewed by: imp, tsoome
Differential Revision: https://reviews.freebsd.org/D32991
Sponsored by: Beckhoff Automation GmbH & Co. KG
The STDSB macro is passed to the ffs_sbget() routine to fetch a
UFS/FFS superblock "from the stadard place". It was identically defined
in lib/libufs/libufs.h, stand/libsa/ufs.c, sys/ufs/ffs/ffs_extern.h,
and sys/ufs/ffs/ffs_subr.c. Delete it from these four files and
define it instead in sys/ufs/ffs/fs.h. All existing uses of this macro
already include sys/ufs/ffs/fs.h so no include changes need to be made.
No functional change intended.
Sponsored by: Netflix
Add ofwbus, iicbus and spibus to pnpautoload so modules under those
buses will be loaded.
On my rockpro64 now :
OK pnpautoload -v
Autoloading modules for simplebus
Using DTB provided by EFI at 0x8100000.
Autoloading modules for ofwbus
/boot/kernel/rk_spi.ko text=0x14b2 text=0xd4c data=0x4d0+0x8 syms=[0x8+0xa98+0x8+0x807]
/boot/kernel/dwwdt.ko text=0x12e2 text=0x78c data=0x4c8+0x10 syms=[0x8+0x990+0x8+0x6e1]
Autoloading modules for iicbus
Autoloading modules for spibus
/boot/kernel/mx25l.ko text=0x1613 text=0x114c data=0x6e8+0x8 syms=[0x8+0xa08+0x8+0x665]
loading required module 'fdt_slicer'
/boot/kernel/fdt_slicer.ko text=0x95e text=0x340 data=0x290 syms=[0x8+0x6c0+0x8+0x4a0]
Turn the presence or absence of boot services into a positive bool (and
change its type to bool). Move declaration to efi.h in the global
variables section.
Sponsored by: Netflix
Reviewed by: tsoome, kib
Differential Revision: https://reviews.freebsd.org/D31814
When the timer drops from double to single digits, a spare 'e' is left
on the end of the line as we don't overwrite it. Include an extra space
at the end to account for this and overwrite the leftover character.
PR: 259429
MFC after: 3 days
Reviewed by: emaste
If CAS detects that radix is not supported, set radix_mmu to 0
to avoid the kernel trying to use it and panic.
MFC after: 2 weeks
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Fix boot1 and loader on PowerPC64 little-endian (LE).
Due to endian issues, boot1 couldn't find the UFS boot partition
and loader wasn't able to load the kernel. Most of the issues
happened because boot1 and loader were BE binaries trying to access
LE UFS partitions and because loader expects the kernel ELF image
to use the same endian as itself.
To fix these issues, boot1 and loader are now built as LE binaries
on PPC64LE. To support this, the functions that call OpenFirmware
were enhanced to correctly perform endian conversion on its input
and output arguments and to change the CPU into BE mode before
making the calls, as OpenFirmware always runs in BE. Besides that,
some other small fixes were needed.
Submitted by: bdragon (initial version)
Reviewed by: alfredo, jhibbits
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D32160
net_open() does replace f_devdata with pointer to netdev_sock,
this will cause memory leak when device is closed, but also does
alter the devopen() logic.
We should store &netdev_sock to dev->d_opendata instead, this
would preserve and follow the devopen() logic.
Fixes network boot on aarch64 (tested by bz).
Reviewed-by: imp
MFC After: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32227
As Radix MMU with superpages enabled is now stable, make it the
default choice on supported hardware (POWER9 and above), since its
performance is greater than that of HPT MMU.
Reviewed by: alfredo, jhibbits
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D30797
Pass the ivlen along through, and just drop this KASSERT() if we're
building _STANDALONE for the time being.
Fixes: 1833d6042c ("crypto: Permit variable-sized IVs ...")
Prior to this commit, the loader would perform readaheads of up to
128 kB; when booting on a UFS filesystem this resulted in a series
of 160 kB reads (32 kB request + 128 kB readahead).
This commit allows readaheads to be longer, subject to a total I/O
size limit of 256 kB; i.e. 32 kB read requests will have added
readaheads of up to 224 kB.
In my testing on an EC2 c5.xlarge instance, this change reduces the
boot time by roughly 80 ms.
Reviewed by: tsoome
MFC after: 1 week
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D32251
The loader bcache attempts to determine whether readahead is useful,
increasing or decreasing its readahead length based on whether a
read could be serviced out of the cache. This resulted in two
unfortunate behaviours:
1. A series of consecutive 32 kB reads are requested and bcache
performs 16 kB readaheads. For each read, bcache determines that,
since only the first 16 kB is already in the cache, the readahead
was not useful, and keeps the readahead at the minimum (16 kB) level.
2. A series of consecutive 32 kB reads are requested and bcache
starts with a 32 kB readahead resulting in a 64 kB being read on
the first request. The second 32 kB request can be serviced out of
the cache, and bcache responds by doubling its readahead length to
64 kB. The third 32 kB request cannot be serviced out of the cache,
and bcache reduces its readahead length back down to 32 kB.
The first syndrome converts a series of 32 kB reads into a series of
(misaligned) 32 kB reads, while the second syndrome converts a series
of 32 kB reads into a series of 64 kB reads; in both cases we do not
increase the readahead length to its limit (currently 128 kB) no
matter how many consecutive read requests are made.
This change avoids this problem by tracking the "unconsumed
readahead" length; readahead is deemed to be useful (and the
read-ahead length is potentially increased) not only if a request was
completely serviced out of the cache, but also if *any* of the request
was serviced out of the cache and that length matches the amount of
unconsumed readahead. Conversely, we now only reduce the readahead
length in cases where there was unconsumed readahead data.
In my testing on an EC2 c5.xlarge instance, this change reduces the
boot time by roughly 120 ms.
Reviewed by: imp, tsoome
MFC after: 1 week
Sponsored by: https://patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D32250
Booting on an EC2 c5.xlarge instance, this reduces the number of I/Os
performed from 609 to 432, reduces the total number of blocks read
from 61963 to 60797, and reduces the time spent in the loader by 39 ms.
Note that b4cb3fe0e3 allowed the bcache to be retained for most of
the boot process, but relies on mounting filesystems; this commit
allows the bcache to be retained at the start of the boot process,
before the root filesystem has been located.
Reviewed by: imp, tsoome
MFC after: 1 week
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D32239
The definition for 'ST' is in efilib.h, so we don't need extern ST here.
Sponsored by: Netflix
Reviewed by: tsoome, kevans
Differential Revision: https://reviews.freebsd.org/D32225
Lua bindings appeared in FreeBSD 12.0. Delete the authors section of the
man page, since it's unclear who wrote different parts of the man
page.
Noted by: Trond Endrestol
Sponsored by: Netflix
Create a man page per loader. Loader(8) will have information common to
all of them, while loader_${INTERP}(8) will have information relevant to
that specific loader. Rewrite loader(8) to give an overview and point to
the appropriate man page. Rewrite each of the loader_${INTER}(8) man
pages to contain only the relevant information to that loader. Put all
the common commands, environment variables, etc in loader_simp(8) and
refernce that from the loader_lua or loader_4th man pages. The
loader_lua(8) could use more details about the Lua
integration. Additional organization may be benefitial.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31340
