Currently, bhyve PCI emulation uses vm_lapic_msi() to raise an MSI in
the guest. The arm64 port has a similar function, vm_raise_msi().
Add vm_raise_msi() on amd64 as well and have it simply call
vm_lapic_msi() so that bhyve can use a common, generically named
function.
Reviewed by: corvink, andrew, jhb
MFC after: 2 weeks
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D41752
- Define wrappers for some MD ioctls.
- Provide a list of vmm device ioctls for cap_ioctl_limit().
- Disable use of the lowmem region.
Reviewed by: corvink
MFC after: 2 weeks
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D41005
libvmmapi leaves a hole at [3GB, 4GB) in the guest physical address
space. This hole is not used in the arm64 port, which maps everything
above 4GB. This change makes the code a bit more general to accomodate
arm64 more naturally. In particular:
- Remove vm_set_lowmem_limit(): it is unused and doesn't have
well-defined constraints, e.g., nothing prevents a consumer from
setting a lowmem limit above the highmem base.
- Define a constant for the highmem base and use that everywhere that
the base is currently hard-coded.
- Make the lowmem limit a compile-time constant instead of a vmctx field.
- Store segment info in an array.
- Add vm_get_highmem_base(), for use in bhyve since the current value is
hard-coded in some places.
No functional change intended.
Reviewed by: corvink, jhb
MFC after: 2 weeks
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D41004
The arm64 port doesn't implement PCI passthrough and in particular
doesn't define the ioctls used by these wrappers. It might be that the
ppt ioctl interface will require modification to support arm64. Until
that's sorted out one way or another, put this code in a separate file
so that it's easy to conditionally compile.
No functional change intended.
Reviewed by: corvink, jhb
MFC after: 2 weeks
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D41003
To enable use in capability mode, libvmmapi needs a list of all the
ioctls that might be invoked on the vmm device handle. Some of these
ioctls are amd64-specific. Move the ioctl list to vmmapi_machdep.c and
define a list of MI ioctls so that the arm64 port can build its own list
without duplicating common ioctls. No functional change intended.
Reviewed by: corvink, jhb
MFC after: 2 weeks
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D41001
ioctls relating to segments and various x86-specific interrupt
controllers are easy candidates to move to vmmapi_machdep.c.
In vmmapi.h I'm just ifdefing MD prototypes for now. We could instead
split vmmapi.h into multiple headers, e.g., vmmapi.h and
vmmapi_machdep.h, but it's not obvious to me yet that that's the right
approach.
No functional change intended.
Reviewed by: corvink, jhb
MFC after: 2 weeks
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D40999
Move vmmapi_freebsd.c there. It contains x86-specific code used only by
bhyveload(8).
Move vcpu_reset() into vmmapi_machdep.c. It is also x86-specific.
No functional change intended.
Reviewed by: corvink, jhb
MFC after: 2 weeks
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D40998
This reduces the coupling between libvmmapi (which creates the highmem
segment) and bhyve, in preparation for the arm64 port.
No functional change intended.
Reviewed by: corvink, jhb
MFC after: 2 weeks
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D40992
fdt.c provides some basic routines which let platform initialization
code build the FDT that gets passed into the guest. For now this is not
very generic; we declare info about CPUs, memory, a single UART
(specified by -o console), a PCIe controller (used for virtio devices),
an interrupt controller and the platform timer.
Co-authored-by: andrew
Reviewed by: corvink, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40996
The arm64 port currently does not support ACPI, it instead builds up an
FDT which is exported to the guest. This mechanism will not be used on
amd64 but isn't really arm64-specific either, so provide an opt-in
mechanism to link libfdt.
No functional change intended.
Reviewed by: corvink, jhb
MFC after: 2 weeks
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D40995
This will be use for arm64 guests, instead of the existing ns16550 UART
model.
Reviewed by: corvink, jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D40997
An initial reading of the preamble of sys_procctl() gives the impression
that no test prevents a malicious user from passing a negative commands
index (in 'uap->com'), which is soon used as an index into the static
array procctl_cmds_info[].
However, a closer examination leads to the conclusion that the existing
code is technically correct. Indeed, the comparison of 'uap->com' to
the nitems() expression, which expands to a ratio of sizeof(), leads to
a conversion of 'uap->com' to an 'unsigned int' as per Usual Arithmetic
Conversions/Integer Promotions applied by '<=', because sizeof() returns
'size_t' values, and we define 'size_t' as an equivalent of 'unsigned
int' (which is not mandated by the standard, the latter allowing, e.g.,
integers of lower ranks).
With this conversion, negative values of 'uap->com' are automatically
ruled-out since they are converted to very big unsigned integers which
are caught by the test. An analysis of assembly code produced by LLVM
16 on amd64 and practical tests confirm that no exploitation is possible.
However, the guard code as written is misleading to readers and might
trip up static analysis tools. Make sure that negative values are
explicitly excluded so that it is immediately clear that EINVAL will be
returned in this case.
Build tested with clang 16 and GCC 12.
Approved by: markj (mentor)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
struct tcpcb embeds a struct osd and a struct callout. Rather than
forcing all consumers to pull in the same headers, include the headers
directly.
No functional change intended.
Reviewed by: glebius
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D44685
beadm(1) no longer exists.
Cross-reference beadm(8).
Aim to improve the HISTORY and AUTHORS sections, including consistency
with the manual pages for beadm(8) and libbe(3).
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/857
exit(3) man page shows __cxa_atexit(3,) instead of __cxa_atexit(3), in a
particular section. It seems the comma gets inside the parenthesis and
with an extra space, it can be viewed as expected.
Signed-off-by: rilysh <nightquick@proton.me>
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/1006
With the latest changes to release/Makefile, it is now possible to
run `make release -jN` without the build failing (at least in my
latest tests).
This reverts commit 7b707e797b.
MFC after: 1 week
The disc1 and bootonly directories have files distributed into them
for use in "full" and "mini" images; the former are disc1.iso and
memstick.img, and the latter is bootonly.iso and mini-memstick.img.
Unfortunately the scripts which package a directory tree into an ISO
or memory stick image also modify the directory, for example to
create an appropriate /etc/fstab file; so creating two images at the
same time breaks.
Resolve this by copying disc1 to disc1-disc1 and disc1-memstick,
and copying bootonly to bootonly-bootonly and bootonly-memstick,
before using those directories for constructing the ISO+memstick
images.
MFC after: 1 week
Place instances of "cd foo && bar" inside subshells for compatibility
with modern make(8) which uses a single shell for the duration of a
makefile target.
MFC after: 1 week
bcm2838_xhci(4) is a shim for the XHCI controller on the Raspberry Pi 4B
SoC. It loads the controller's firmware before passing control to the
normal xhci(4) driver.
When xhci(4) is built as a module (and not in the kernel), bcm2838_xhci
is not built at all and the RPi4's XHCI controller won't attach due to
missing firmware.
To fix this, build a new module, bcm2838_xhci.ko, which depends on
xhci.ko. For the dependency to work correctly, also modify xhci to
provide the 'xhci' module in addition to the 'xhci_pci' module it
already provided.
Since bcm2838_xhci is specific to a quirk of the RPi4 SoC, only build
the module for AArch64.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/1142
Verify that a capability violation is recorded when shm_open(2) is called
with a non-anonymous path.
Approved by: markj (mentor)
Reviewed by: markj
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D44733
If userpath is not SHM_ANON, then copy it in early so ktrace(2) can
record it. Without this change, ktrace(2) will attempt to strcpy a
userspace string and trigger a page fault.
Reported by: syzbot+490b9c2a89f53b1b9779@syzkaller.appspotmail.com
Fixes: 0cd9cde767
Approved by: markj (mentor)
Reviewed by: markj
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D44702
There are a few spots in which unionfs_lookup() accesses unionfs vnode
private data without holding the corresponding vnode lock or interlock.
Reviewed by: kib, olce
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D44601
While here, adjust the sample setting for NVME_USE_NVD to use a
non-default setting as is typical in entries in NOTES.
Discussed with: imp
Reviewed by: manu
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44691
The NVMe drivers are portable and are already included statically in
GENERIC on other architectures such as aarch64 and riscv64.
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44690
- Add typical comments after device entries (copied from amd64
GENERIC)
- Add an entry for 'device ada'. Normally this is pulled in via
'device sd', but is documented in ada(4) and can be used to include
ATA/SATA disk support in a kernel without SCSI disk support.
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44689
'device iser' is documented in iser(4) but not supported. Hook it up
to the build.
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44687
As mentioned in zpoolprops(7), on some SSDs, it may not be desirable to
use ZFS autotrim because a large number of trim requests can degrade
disk performance; instead, the pool should be manually trimmed at
regular intervals.
Add a new daily periodic script for this purpose, 801.trim-zfs. If
enabled (daily_trim_zfs_enable=YES; the default is NO), it will run a
'zpool trim' operation on all online pools, or on the pools listed in
'daily_trim_zfs_pools'.
The trim is not started if the pool is degraded (which matches the
behaviour of the existing 800.scrub-zfs script) or if a trim is already
running on that pool. Having autotrim enabled does not inhibit the
periodic trim; it's sometimes desirable to run periodic trims even with
autotrim enabled, because autotrim can elide trims for very small
regions.
PR: 275965
MFC after: 1 week
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/956
QEMU for armv7 includes a PCI memory range whose CPU address is
greater than 4GB. This falls outside the range of armv7's global
mem_rman used by the nexus driver. As a result, pcib0 fails to
attach blocking all PCI devices.
Instead, change the driver to be a bit more tolerant. If allocating a
resource for a range fails, don't fail attaching the entire driver,
but do skip adding the associated PCI range to the relevant rman in
the pcib driver. This will prevent child devices from using BARs that
allocate from this range. In the case of QEMU on armv7 devices can
still allocate from an earlier PCI memory range that is within the
32-bit address space (and in fact none of the firmware-assigned memory
BARs use addresses from the upper range).
While here, reorder the operations on I/O ranges a bit: 1) print the
range under bootverbose first (rather than last) so that the range is
printed before any relevant errors for the range, 2) move
rman_manage_region last after the parent resource has been set and
allocated.
Reported by: markj, Jenkins
Reviewed by: markj
Fixes: d79b6b8ec2 pci_host_generic: Don't rewrite resource start address for translation
Differential Revision: https://reviews.freebsd.org/D44698
The regressions in aio(4) and kernel RPC aren't a 5 minute problem.
This reverts commit d80a97def9.
This reverts commit d1cbb17a87.
This reverts commit fb8a8333b4.
Default to VIMAGE as yes.
Add VIMAGE to __DEFAULT_DEPENDENT_OPTIONS (to define VIMAGE_SUPPORT)
Only output VIMAGE to opt_global.h when VIMAGE support is wanted.
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D39636
Create ATTR_CONTIGUOUS mappings in pmap_enter_object(). As a result,
when the base page size is 4 KB, the read-only data and text sections
of large (2 MB+) executables, e.g., clang, can be mapped using 64 KB
pages. Similarly, when the base page size is 16 KB, the read-only
data section of large executables can be mapped using 2 MB pages.
Rename pmap_enter_2mpage(). Given that we have grown support for 16 KB
base pages, we should no longer include page sizes that may vary, e.g.,
2mpage, in pmap function names. Requested by: andrew
Co-authored-by: Eliot Solomon <ehs3@rice.edu>
Differential Revision: https://reviews.freebsd.org/D44575
This fixes compiler warnings when -Wunused-arguments is enabled and
not quieted.
Reviewed by: kib, markj
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D44623
EEXIST is possible in a race condition.
Inspired by: ffc72591b1 (Don't worry if a module is already loaded ...)
Reviewed by: glebius
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D44633
Commit fefb7c399b added warning messages noting
that administrative controls that exported directories
that are not local server file system mount points actually
export the entire local server file system.
This commit also added a new command line option "-A' that
silences these warnings.
This patch documents the new "-A' mountd option.
This is a content change.
Reviewed by: markj, pauamma_gundo.com (manpages)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D44692
