acpidump(8) uses iasl(8) to parse acpi information.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D44596
Since all sndstat_entry->handler fields point to sndstat_prepare_pcm(),
we can just call the function directly, without assigning it to a
function pointer and calling it indirectly.
While here, move sndstat_prepare_pcm() to pcm/sndstat.c, as it is more
suitable there.
No functional change intended.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: dev_submerge.ch, markj
Differential Revision: https://reviews.freebsd.org/D44571
The new logic is mostly self explanatory except for the value fit checks.
If b has fewer integer bits than a, 0 == (Q_GIABSVAL(a) & (~Q_TC(a, 0) << Q_NIBITS(b))) is checking that a's integer value does not have high-order bits set above what b is capable of storing.
If b has fewer fractional bits than a, 0 == (Q_GFABSVAL(a) & ~(~Q_TC(a, 0) << (Q_NFBITS(a) - Q_NFBITS(b))))) is checking that a's fractional value does not have low-order bits set below what b is capable of storing.
Obtained from: Netflix, Inc.
MFC afer: 1 week
The target_slot argument of max_slots_available() can be NULL.
Therefore, check for this in all places.
Right now, all callers provide non-NULL pointer.
Reported by: Coverity Scan
CID: 1527732
Reviewed by: rrs
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D44527
* When copying a directory, if the destination exists and is not a
directory, we would previously emit an error message and exit. The
correct behavior according to POSIX is to emit an error message and
continue without descending further into the source directory.
* When copying a directory, if the destination does not exist and we
fail to create it, we would previously emit an error message and
exit. The correct behavior according to POSIX is to emit an error
message and continue. Whether to descend further into the source
directory is explicitly left unspecified; GNU cp does not, which
seems to me to be the safer and less surprising option, so let's not
either.
MFC after: 1 week
Sponsored by: Klara, Inc.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D44577
The old errno value used is specifically for Capsicum and shouldn't be
co-opted in this way. It has special handling in the generic syscall
layer (see syscallret()). OpenBSD returns ENETUNREACH in this case;
let's do the same thing.
Reviewed by: kevans, imp
MFC after: 2 weeks
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D44582
Instead of blindly copying two periods of audio data to and from DMA
buffers, keep track of the writing position and derive the actual
part of audio data that needs to be copied.
This approximately halves the number of samples copied in total.
Differential Revision: https://reviews.freebsd.org/D44084
When "administrative controls" (which are exports of subdirectories
within a NFS server's local file system) are used, they export the
entire local server file system. (The subdirectory only applies to
the Mount protocol used for NFSv3 mounts.)
To minimize the risk that this causes confusion w.r.t. what is exported
to NFS client(s), this patch generates warning messages for these.
Only one message is generated for each server local file system.
The messages can be silenced via a new "-A" command line option.
The mountd.8 man page will be patched via a separate commit.
Reviewed by: emaste, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D44502
I have a kernel module which fails to load because of an unrecognized
relocation type. link_elf_load_file() fails before the module's ctors
are invoked and it calls linker_file_unload(), which causes the module's
dtors to be executed, resulting in a kernel panic.
Add a flag to the linker file to ensure that dtors are not invoked if
unloading due to an error prior to ctors being invoked.
At the moment I only implemented this for link_elf_obj.c since
link_elf.c doesn't invoke dtors, but I refactored link_elf.c to make
them more similar.
Fixes: 9e575fadf4 ("link_elf_obj: Invoke fini callbacks")
Reviewed by: zlei, kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D44559
Hot-unplugging a sound device, such as a USB sound card, whilst being
consumed by an application, results in an infinite loop until either the
application closes the device's file descriptor, or the channel
automatically times out after hw.snd.timeout seconds. In the case of a
detach however, the timeout approach is still not ideal, since we want
all resources to be released immediatelly, without waiting for N seconds
until we can use the bus again.
The timeout mechanism works by calling chn_sleep() in chn_read() and
chn_write() (see pcm/channel.c) in order to send the thread to sleep,
using cv_timedwait_sig(). Since chn_sleep() sets the CHN_F_SLEEPING flag
while waiting for cv_timedwait_sig() to return, we can test this flag in
pcm_unregister() (called during detach) and wakeup the sleeping
thread(s) to immediately kill the channel(s) being consumed.
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
PR: 194727, 278055, 202275, 220949, 272286
Reviewed by: dev_submerge.ch, markj
Differential Revision: https://reviews.freebsd.org/D43545
Currently the snd_clone framework creates device nodes on-demand for
every channel, through the dsp_clone() callback, and is responsible for
routing audio to the appropriate channel(s). This patch gets rid of the
whole snd_clone framework (including any related sysctls) and instead
uses DEVFS_CDEVPRIV(9) to handle device opening, channel allocation and
audio routing. This results in a significant reduction in code size as
well as complexity.
Behavior that is preserved:
- hw.snd.basename_clone.
- Exclusive access of an audio device (i.e VCHANs disabled).
- Multiple processes can read from/write to the device.
- A device can only be opened as many times as the maximum allowed
channel number (see SND_MAXHWCHAN in pcm/sound.h).
- OSSv4 compatibility aliases are preserved.
Behavior changes:
Only one /dev/dspX device node is created (on attach) for each audio
device, as opposed to the current /dev/dspX.Y devices created by
snd_clone. According to the sound(4) man page, devices are not meant to
be opened through /dev/dspX.Y anyway, so it is best if we do not create
device nodes for them in the first place. As a result of this, modify
dsp_oss_audioinfo() to print /dev/dspX in the "ai->devnode", instead of
/dev/dspX.Y.
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
Reviewed by: dev_submerge.ch, markj
Differential Revision: https://reviews.freebsd.org/D44411
In order for pmap_kenter{,_device}() to create superpage mappings,
either 64 KB or 2 MB, pmap_mapdev{,_attr}() must request appropriately
aligned virtual addresses.
Reviewed by: markj
Tested by: gallatin
Differential Revision: https://reviews.freebsd.org/D42737
The ATTR_CONTIGUOUS bit within an L3 page table entry designates that
L3 page as being part of an aligned, physically contiguous collection
of L3 pages. For example, 16 aligned, physically contiguous 4 KB pages
can form a 64 KB superpage, occupying a single TLB entry. While this
change only creates ATTR_CONTIGUOUS mappings in a few places,
specifically, the direct map and pmap_kenter{,_device}(), it adds all
of the necessary code for handling them once they exist, including
demotion, protection, and removal. Consequently, new ATTR_CONTIGUOUS
usage can be added (and tested) incrementally.
Modify the implementation of sysctl vm.pmap.kernel_maps so that it
correctly reports the number of ATTR_CONTIGUOUS mappings on machines
configured to use a 16 KB base page size, where an ATTR_CONTIGUOUS
mapping consists of 128 base pages.
Additionally, this change adds support for creating L2 superpage
mappings to pmap_kenter{,_device}().
Reviewed by: markj
Tested by: gallatin
Differential Revision: https://reviews.freebsd.org/D42737
Debugger has the powers to cause unbound delay in single-threading,
which then blocks the threaded taskqueue. The reproducer is
`truss -f timeout 2 sleep 10`.
Reported by: mjg
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D44523
Linux 6.5 moved to a vendor-based subdirectory for arm DTS, change
our Makefiles accordingly.
This makes universe also compile arm.armv7 ARMADA38X sucessfully.
In v5.18 `filemap_range_has_page` moved to `pagemap.h`
`pagemap.h` has been around since 3.10 so just include both
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#16034
Update the I2C controller logic to be more consistent with the
newer version of the controller reference manual.
This makes it work better on modern LS/LX platforms and avoids
unnecessary delays. Also fixes a lock leak.
MFC after: 7 days
Tested by: bz (LS1088a FDT), Pierre-Luc Drouin (Honeycomb, ACPI)
Differential Revision: https://reviews.freebsd.org/D44021
Move the code from the arm specific to the iicbus controller directory.
Split up between general logic and bus attachment code.
Add support for ACPI attachment in addition to FDT.
MFC after: 7 days
Tested by: bz (LS1088a FDT), Pierre-Luc Drouin (Honeycomb, ACPI)
Based on: D24917 by Val Packett (initial early version)
Differential Revision: https://reviews.freebsd.org/D44020
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Jason Lee <jasonlee@lanl.gov>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#16028Closes#16035
43e8f6e37 introduced a subtle API misuse, in that it passed the output
from vdev_bdev_mode() back into itself. Fortunately, the
SPA_MODE_(READ|WRITE) bit values exactly map to the FMODE_(READ|WRITE) &
BLK_OPEN_(READ|WRITE) bit values, so it didn't result in a bug, but it
was hard to read and understand, so I cleaned it up.
In doing so, I noticed that the only call to vdev_bdev_mode() without
the "exclusive" flag set was in that misuse, and actually, we never do a
non-exclusive blkdev_get_by_path(). So I've just made exclusive be
always-on.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#15995
currently, the linux kernel allows 2^20 minor devices per major device
number. ZFS reserves blocks of 2^4 minors per zvol: 1 for the zvol
itself, the other 15 for the first partitions of that zvol. as a result,
only 2^16 such blocks are available for use.
there are no checks in place to avoid overflowing into the major device
number when more than 2^16 zvols are allocated (with volmode=dev or
default). instead of ignoring this limit, which comes with all sorts of
weird knock-on effects, detect this situation and simply fail allocating
the zvol block device early on.
without this safeguard, the kernel will reject the attempt to create an
already existing block device, but ZFS doesn't handle this error and
gets confused about which zvol occupies which minor slot, potentially
resulting in kernel NULL derefs and other issues later on.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes#16006
The KPI for this function was misleading. From the NetLink perspective it
looked like a function that: a) allocates new hdr, b) can fail. Neither
was true. Let the function return a error code instead of returning the
same hdr it was passed to. In case if future Linux NetLink compatibility
support calls for reallocating header, pass hdr as pointer to pointer.
With KPI that returns a error, propagate domain conversion errors all the
way up to NetLink module. This fixes panic when unknown domain is
converted to 0xff and this invalid value is passed into NetLink
processing.
PR: 274536
Reviewed by: melifaro
Differential Revision: https://reviews.freebsd.org/D44392
Express "conversion failed" with maximum possible value. This allows to
reduce number of size/signedness conversion in the code that utilizes the
functions.
PR: 274536
Reviewed by: melifaro
Differential Revision: https://reviews.freebsd.org/D44375
There is no need for a separate structure neither for a linked list.
Provide each VNET with an array of pointers to if_clone that has the same
size as the driver list.
Reviewed by: zlei, kevans, kp
Differential Revision: https://reviews.freebsd.org/D44307
The kernel CTF loading routines print various warnings when attempting
to load CTF data from an ELF file. After the changes in c21bc6f3c2
those warnings are unnecessarily printed for each kernel module
that was compiled without CTF data.
The kernel linker already uses the bootverbose flag to conditionally
print CTF loading errors. This patch alters kern_ctf.c
routines to do the same.
Reported by: Alexander@leidinger.net
Approved by: markj (mentor)
Fixes: c21bc6f3c2 ("ddb: Add CTF-based pretty printing")
Before a protocol specific control block started to embed inpcb in self
(see 0aa120d52f, e68b379244, 483fe96511) this pointer used to point
at it.
Retain kf_sock_inpcb field in the struct kinfo_file in <sys/user.h>. The
exp-run detected a minimal use of the field in ports:
* sysutils/lsof - patched upstream
* net-mgmt/netdata - patch accepted upstream
* emulators/qemu-user-static - upstream master branch seems not using
the field anymore
We can keep the field around for some time, but eventually it may be
reused for something else.
PR: 277659 (exp-run)
Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D44491
Currently, zpool add allows users to add top-level vdevs that have
different ashifts but doing so prevents users from being able to
perform a top-level vdev removal. Often times consumers may not realize
that they have mismatched ashifts until the top-level removal fails.
This feature adds ashift validation to the zpool add command and will
fail the operation if the sector size of the specified vdev does not
match the existing pool. This behavior can be disabled by using the -f
flag. In addition, new flags have been added to provide fine-grained
control to disable specific checks. These flags
are:
--allow-in-use
--allow-ashift-mismatch
--allow-replicaton-mismatch
The force flag will disable all of these checks.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mark Maybee <mmaybee@delphix.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes#15509
There is no reason to have macros for this. Putting the code in
sndstat_prepare_pcm() directly makes it easier to work with it.
No functional change intended.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D44545
Prevent a use-after-free in kern_poll() by making sure the buffer's
selinfo is drained. This is required for a subsequent patch that
implements asynchronous audio device detach.
Reported by: KASAN
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D44544
Prior to this commit, we install git from ports if there is a ports
tree available and git is not installed, and we install git from pkg
otherwise -- including the case where git is already installed.
Rework the logic to not (re)install git at all if it is already
installed.
MFC after: 3 days
