Rather than using a special value to denote "use the default router",
treat the absence of the -g option to mean the same thing. The
in-kernel netdump client will always attempt to reach the server
directly before falling back to the configured gateway anyway. This
change makes it cleaner to support a hostname value for -g.
Reviewed by: cem
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18025
functions. Notably, reflow the text of some comments so that they
occupy fewer lines, and introduce an assertion in one of the new
helper functions so that it is not misused by a future caller.
In collaboration with: Doug Moore <dougm@rice.edu>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17635
Go through the ZFS layer instead; given a BE, we can derive the dataset,
zfs_open it, then zfs_unmount. ZFS takes care of the dirty details and
likely gets it more correct than we did for more interesting setups.
MFC after: 3 days
libbe(3) currently uses zfs_be_root and locates which of its children is
currently mounted at "/". This is reasonable, but not correct in the case of
a chroot, for two reasons:
- chroot root may be of a different zpool than zfs_be_root
- chroot root will not show up as mounted at "/"
Fix both of these by rewriting libbe_init to work from the rootfs down.
zfs_path_to_zhandle on / will resolve to the dataset mounted at the new
root, rather than the real root. From there, we can derive the BE root/pool
and grab the bootfs off of the new pool. This does no harm in the average
case, and opens up bectl to operating on different pools for scenarios where
one may be, for instance, updating a pool that generally gets re-rooted into
from a separate UFS root or zfs bootpool.
While here, I've also:
- Eliminated the check for /boot and / to be on the same partition. This
leaves one open to a setup where /boot (and consequently, kernel/modules)
are not included in the boot environment. This may very well be an
intentional setup done by someone that knows what they're doing, we should
not kill BE usage because of it.
- Eliminated the validation bits of BEs and snapshots that enforced
'mountpoint' to be "/" -- this broke when trying to operate on an imported
pool with an altroot, but we need not be this picky.
Reported by: philip
Reviewed by: philip, allanjude (previous version)
Tested by: philip
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18012
transfer mode only (lost with r321385). [1]
- Similarly, don't try to set the power class on MMC devices that comply
to version 4.0 of the system specification but are operated in default/
legacy transfer or 1-bit bus mode as no power class is specified for
these cases. Trying to set a power class nevertheless resulted in an -
albeit harmless - error message.
PR: 231713 [1]
This should provide more complete coverage of currently defined Unicode
characters as compared to manually assembled one we use currently.
Comparison of original and new UTF-8 ctype maps by character class:
TYPE ORIG NEW
alnum 94229 126029
alpha 93557 125419
blank 4 2
cntrl 73 137685
digit 469 622
graph 109615 137203
lower 1478 2145
print 109641 137222
punct 3428 797
rune 110481 274907
space 33 24
upper 983 1781
xdigit 469 622
Large number of added cntrl definitions is due to the fact that private-use
planes are currently defined as such, this can change in the future.
Discussed with: bapt
Approved by: kib (mentor, implicit)
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D17842
Just allow MSI interrupts to always start at the end of the I/O APIC
pins. Since existing machines already have more than 255 I/O APIC
pins, IRQ 255 is no longer reliably invalid, so just remove the
minimum starting value for MSI.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D17991
SDM rev. 068 was released yesterday and it contains the description of
the MSR 0x10a IA32_ARCH_CAP. This change adds symbolic definitions for
all bits present in the document, and decode them in the CPU
identification lines printed on boot.
But also, the document defines SSB_NO as bit 4, while FreeBSD used but
2 to detect the need to work-around Speculative Store Bypass
issue. Change code to use the bit from SDM.
Similarly, the document describes bit 3 as an indicator that L1TF
issue is not present, in particular, no L1D flush is needed on
VMENTRY. We used RDCL_NO to avoid flushing, and again I changed the
code to follow new spec from SDM.
In fact my Apollo Lake machine with latest ucode shows this:
IA32_ARCH_CAPS=0x19<RDCL_NO,SKIP_L1DFL_VME,SSB_NO>
Reviewed by: bwidawsk
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D18006
Specifically, block 0-length fragments, even when the MF bit is clear.
Also, ensure that every fragment with the MF bit clear ends at the same
offset and that no subsequently-received fragments exceed that offset.
Reviewed by: glebius, markj
MFC after: 3 days
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D17922
Doing so removes the dependency on proctree lock from sysctl process list
export which further reduces contention during poudriere -j 128 runs.
Reviewed by: kib (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17825
We generally document shutdown(8) instead of reboot(8) as it's better for
interactive use.
In modern FreeBSD is matters a lot less, it's mostly just convention. One
minor thing is that shutdown(8) produces a global message, while reboot(8)
does not. It is believed that historically, some versions of reboot did not
do appropriate safe shutdown checks and just rebooted.
It's also just consistency: for example the handbook[1] documents shutdown.
There is actually another important difference between reboot and shutdown
-r now: reboot does not run /etc/rc.shutdown. This is because reboot has
its own shutdown procedure and does not signal init like init 6 and
shutdown -r now do (except in the case of rerooting via reboot -r).
A few years ago jilles@ proposed changing reboot's default to signalling
init (preserving reboot -q which just invokes the reboot system call), but
this was not accepted. Perhaps this can be tried again for 13.0.
[1]: https://www.freebsd.org/doc/handbook/boot-shutdown.html
Reported by: eadler
Reviewed by: eadler, jilles
Approved by: krion (mentor)
Differential Revision: https://reviews.freebsd.org/D16843
endpoints.
This can be used to configure several IPsec tunnels between two hosts
with different security associations.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
These SoCs have CHIPID registers, which store the Chip model, according
to the manufacturer; make use of those in order to better identify
the chip we're actually running on.
If we're unable to read the CHIPID registers for some reason we will
use the string "unknown " as a value for hw.model.
Reported by: yamori813@yahoo.co.jp
Sponsored by: Smartcom - Bulgaria AD
The CBQ BORROW flag conflicts with the RMCF_CODEL flag; the
two sets of definitions actually define the same things. The symptom
is that a kernel with CBQ support and not CODEL fails to load a QoS
policy with the obscure error "pfctl: DIOCADDALTQ: Cannot allocate memory."
If ALTQ_DEBUG is enabled, the error becomes a little clearer:
"rmc_newclass: CODEL not configured for CBQ!" is printed by the kernel.
There really shouldn't be two sets of macros that have to be defined
consistently, but the include structure isn't right for exporting
CBQ flags to altq_rmclass.h. Re-align the definitions, and add
CTASSERTs in the kernel to ensure that the definitions are consistent.
PR: 215716
Reviewed by: pkelsey
MFC after: 2 weeks
Sponsored by: Forcepoint LLC
Differential Revision: https://reviews.freebsd.org/D17758
vmem's are not just used for TLS memory in TOM and the #include actually
predates the TLS code so should not have been removed when the TLS vmem
moved in r340466.
Pointy hat to: jhb
Sponsored by: Chelsio Communications
Instead of jumping to locations which store the exact number of bytes,
use displacement to move the destination.
In particular the following clears an area between 8-16 (inclusive)
branch-free:
movq %r10,(%rdi)
movq %r10,-8(%rdi,%rcx)
For instance for rcx of 10 the second line is rdi + 10 - 8 = rdi + 2.
Writing 8 bytes starting at that offset overlaps with 6 bytes written
previously and writes 2 new, giving 10 in total.
Provides a nice win for smaller stores. Other ones are erratic depending
on the microarchitecture.
General idea taken from NetBSD (restricted use of the trick) and bionic
string functions (use for various ranges like in this patch).
Reviewed by: kib (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17660
The key context is always placed immediately after the work request
header. The total work request length has to be rounded up by 16
however.
MFC after: 1 month
Sponsored by: Chelsio Communications
The addresses passed when reading and writing keys are always shifted
right by 5 as the memory locations are addressed in 32-byte chunks, so
the quantum needs to be 32, not 8.
MFC after: 1 month
Sponsored by: Chelsio Communications
For some reason the proc UMA zone's ctor, dtor and init functions are
instrumented, but these functions are always available through FBT.
Moreover, the probes are not part of the original Solaris proc
provider, aren't documented, have no uses (e.g., in dwatch(8)) and
have no clear use to begin with. Therefore, remove them.
Reviewed by: rpaulo
Differential Revision: https://reviews.freebsd.org/D2169
For TOE TLS, we just want to advance the send pointer to skip over the
record just sent to the TOE. The recently added sbsndptr_adv() is
sufficient for that and is cheaper.
MFC after: 1 month
Sponsored by: Chelsio Communications
- tidy up memset to have rax set earlier for small sizes
- finish the tail in memset with an overlapping store
- align memset buffers to 16 bytes before using rep stos
Sponsored by: The FreeBSD Foundation
The number of MSI IRQs still defaults to 512, but it can now be
changed at boot time via the machdep.num_msi_irqs tunable.
Reviewed by: kib, royger (older version)
Reviewed by: markj
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17977
recent changes in spibus and allow the use of different SPI modes on
the same bus.
Reported by: ian
Sponsored by: Rubicon Communications, LLC (Netgate)
It's often useful to have a callback when an I/O takes more than a
threshold amount of time. This adds the infrastructure for periph
devices to register one.
One use-case is as a debugging aide when you need a semi-realtime
indication of an I/O outlier so you can trigger bus capture gear for
vendor analysis.
Sponsored by: Netflix, Inc
rather than the floor(). Returning the floor means that
sbttoX(Xtosbt(y)) != y for almost all values of y. In practice, this
results in a difference of at most 1 in the lsb of the sbintime_t.
This difference is meaningless for all current users of these
functions, but is important for the newly introduced sysctl conversion
routines which implicitly rely on the transformation being idempotent.
Sponsored by: Netflix, Inc
iflib_stop() was not resetting the rxq completion queue state variables.
This meant that for any driver that has receive completion queues, after a
reinit, iflib would start asking what's available on the rx side starting at
whatever the completion queue index was prior to the stop, instead of at 0.
Submitted by: pkelsey
Reported by: pkelsey
MFC after: 3 days
Sponsored by: Limelight Networks
option, we pass -1 down to listen, which causes it to use the
kern.ipc.soacceptqueue sysctl.
Approved by: mav
MFC after: 2 weeks
Sponsored by: iXsystems Inc
The off-by-one errors in 332735 weren't actual errors and were
preventing the last MSI interrupt source from being used. Instead,
the issue is that when all MSI interrupt sources were allocated, the
loop in msix_alloc() would terminate with 'msi' still set to non-null.
The only check for 'i' overflowing was in the 'msi' == NULL case, so
msix_alloc() would try to reuse the last MSI interrupt source instead
of failing.
Fix by moving the check for all sources being in use to just after the
loop.
Reviewed by: kib, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17976
