1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-14 10:09:48 +00:00
Commit Graph

39048 Commits

Author SHA1 Message Date
Poul-Henning Kamp
ad6cb55952 Be more informative and try to ask the user in some instances if we can't
figure out the root device.
1999-07-03 08:24:00 +00:00
Poul-Henning Kamp
e366aade76 Bail after 5 attempts to read very noisy signals. 1999-07-03 08:23:00 +00:00
Poul-Henning Kamp
c31558b215 Warn about drivers which take over other drivers cdevsw entries, but still
grant them squatters right.
1999-07-03 08:22:30 +00:00
KATO Takenori
f17162e2da Sync with sys/i386/conf/majors.i386 revision 1.78. 1999-07-03 08:18:27 +00:00
KATO Takenori
819e31e3b3 Sync with sys/i386/conf/Makefile.i386 revision 1.157. 1999-07-03 08:17:40 +00:00
Bruce Evans
c04bb6a0e4 Fixed regression of $Id$ to "from: $Header$" in previous commit.
The `from:' was already corrupted by expansion of $Header$ in in
rev.1.1; rev.1.2 replaced it by $Id$.  Put $Id$ in the usual place
this time.
1999-07-03 06:48:02 +00:00
Alan Cox
789fb7ccdc An SMP-specific change: Add the lock prefix to RMW operations
on ipending.
1999-07-03 06:33:48 +00:00
Michael Haro
582913b94e wcd -> acd
Submitted by:	 Ruslan Ermilov <ru@ucb.crimea.ua>
1999-07-03 05:42:38 +00:00
Brian Feldman
6989d53551 sys/buf.h needs to have included sys/systm.h for spl prototypes. 1999-07-03 04:56:57 +00:00
Brian Feldman
1e9e99efc0 It's really mP6.
:)
1999-07-03 01:56:58 +00:00
Matt Jacob
a02592816a Well, don't try and probe 65535 luns- things just don't really work well
when this happens. Limit to 16 luns for the 2100/2200 for now.
1999-07-03 01:44:05 +00:00
Mike Smith
d0b133cb59 Bump maxusers to 32 to match the i386.
Remove the gzip pseudo-device, since the Alpha never did a.out.
Add the 'wb' driver since it is supported.
1999-07-03 01:35:51 +00:00
Greg Lehey
d0448064fc Add definitions for simplified config commands
Change definition of sflag

Reported-by:	Johan Karlsson <k@numeri.campus.luth.se>
		Doug <Doug@gorean.org>
		green

World-broken-by:	grog
Pointy-hat-passed-to:	grog
1999-07-02 23:57:45 +00:00
Matt Jacob
222bb54266 Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
Matt Jacob
02ab33795d Remove all pre-CAM code. Fix breakage for SCCLUN when it is in fact
ISP2100_SCCLUN. Make changes for how ISPASYNC_PDB_CHANGE_COMPLETE
is now ISPASYNC_PDB_CHANGED. Add in ISPASYNC_FABRIC_DEV case.
1999-07-02 23:12:58 +00:00
Matt Jacob
b460c5c9a9 Merge defunct isp_freebsd_cam.h into this file. Do some appropriate
changes like rolling minor revision levels and defines where we now
do default WWN seeding in the platform files.
1999-07-02 23:10:34 +00:00
Matt Jacob
83cdc1a2b0 Roll revision levels. Add support for the Qlogic 2200 (warn about
not having SCSI_ISP_SCCLUN config defined if we don't have f/w for
the 2200- it's resident firmware uses SCCLUN (65535 luns)). Change
the way the default LoopID is gathered (it's now a platform specific
define so that some attempt at a synthetic WWN can be made in case
NVRAM isn't readable).

Change initialization of options a bit- don't use ADISC. Set
FullDuplex mode if config options tells us to do so. Do not use
FULL_LOGIN after LIP- it's the right thing to do but it causes too
much loop disruption (Loop Resets). Sanity check some default
values. Redo construction of port and node WWNs based upon what we
have- if we have 2 in the top nibble, we can have distinct port
and node WWNs. Clean up some SCCLUN related code that we obviously
had never compiled (:-(). Audit commands coming int ispscsicmd and
don't throw commands at Fibre devices that do not have Class 3
service parameters TARGET ROLE defined.

Clean up f/w initialization a bit. Add Fabric support (or at least
the first blush of it). Whew - way too much to describe here.
Basically, after a LIP, hang out until we see a Loop Up or a Port
DataBase Change async event, then see if we're on a Fabric
(GET_PORT_NAME of FL_PORT_ID). If we are, try and scan the fabric
controller for fabric devices using the GetAllNext SNS subcommand.
As we find devices, announce them to the outer layer. Try and do
some guard code for broken (Brocade) SNS servers (that get stuck
in loops- gotta maybe do this a different way using the GP_ID3 cmd
instead).  Then do a scan of the lower (local loop) ids using a
GET_PORT_NAME to see if the f/w has logged into anything at that
loop id. If so, then do a GET_PORT_DATABASE command.  Do this scan
into a local database. At this point we can say the loop is 'Ready'.
After this, we merge our local loop port database with our stored
port database- in a as yet to be really fully exercised fashion we
try and follow the logic of something having moved around. The
first time we see something at a Loop ID, we fix it, for the purpose
of this system instance, at that Loop ID. If things shift around
so it ends up somewhere else, we still keep it at this Loop ID (our
'Target') but use the new (moved) Loop ID when we actually throw
commands at it. Check for insane cases of different Loop IDs both
claiming to have the same WWN- if that happens, invalidate both.
Notify the outer layer of devices that have arrived and devices
that have gone away. *Finally*, when this is done, search the
softc's database of Fabric devices and perform logout/login actions.
The Qlogic f/w maintains logout/login for all local loop devices.
We have to maintain logout/login for fabric devices- total PITA.
Expect to see this area undergo more change over time.
1999-07-02 23:06:38 +00:00
Mike Smith
36b717ede4 Mention the Rise MP6, list merged items. There are probably a pile more
changes that need to be listed here.
1999-07-02 23:04:28 +00:00
Matt Jacob
77d4e8361d Roll revision levels. Move DEFAULT_LOOPID definition to platform files.
Change some fcp parameter structures such that we can get the portid
(24 bit value), get both node and port WWN, know whether we're on a fabric
or not, note whether we've ever seen the loop up, and note the current
state of the loop.

Replace the isp_pdb_t structure in fcparams with a reduced cost structure
that maintains a static relationship to 'Target', but can have the actual
loop ID used change (in case, post LIP, we discover things have moved
around). This also retains portid and node/port WWNs.  This array gets
larger if we have fabric support compiled in.

Note special loop IDs that are invariate for this device- FL_PORT_ID
(0x7e) which tells us if there's a fabric controller present, FC_PORT_ID
and FC_SNS_ID (fabric controller port and fabric SNS server port). We don't
use the latter two for anything. IDs above FC_SNS_ID up through 255 are
available for mapping fabric devices to 'target' ids.

Add in a config define to set FC full duplex mode. Add in a define to
recognize the Qlogic 2200 boards. Add comments about ISPCTL commands.
Add and change some ISPASYNC enumes.
1999-07-02 22:46:31 +00:00
Jordan K. Hubbard
7050843886 Eliminate some varargs abuse. 1999-07-02 22:36:14 +00:00
Matt Jacob
fc9961b5dd Add in SNS and Fabric login/logout commands. Clean up ICBOPT defines.
Remove INVALID_PDB_OPTIONS defines. Define generic SNS request and
response structures and the bare minimum GAN and GP3 subcommands.
1999-07-02 22:31:11 +00:00
Matt Jacob
8df9252043 This file is now obsolete. 1999-07-02 22:26:10 +00:00
Bill Fumerola
573d228c9a Remove unused variable.
Approved By:	phk
1999-07-02 20:46:03 +00:00
Mike Smith
396641ab13 Document the hw.physmem tunable. (There should be arch-specific tunable
help sections.)
1999-07-02 20:38:05 +00:00
Mike Smith
595bd0d58e Lightly overhaul the memory sizing code again.
- The kernel environment variable 'hw.physmem' can be used to set the
   amount of physical memory space, based at 0, that FreeBSD will use.
   Any memory detected over this limit is ignored.  Documentation for
   this is available under 'help set tunables' in the loader.

 - In the case where system memory size can't be accurately determined,
   hw.physmem is used as a best-guess memory size, but speculative
   probing will be used to determine actual memory size if any of the
   guesses or hints are 16M or more.

 - If RB_VERBOSE, we list the memory regions as we test them.

 - The compile-time option MAXMEM supplies a default value for
   'hw.physmem'.
1999-07-02 20:33:32 +00:00
David E. O'Brien
14ffedf1b0 * The OBSTACK_CHUNK_SIZE #define was in the "Code generation parameters"
section rather than the "Miscellaneous parameters" where it belongs.

* Clarify what we are locating using the -m rule.

Submitted by:	bde
1999-07-02 19:26:45 +00:00
David E. O'Brien
5bfda2db35 The GNU standard about putting 2 spaces after sentences in comments
was not consistantly followed.

Submitted by:	bde
1999-07-02 19:20:44 +00:00
Jordan K. Hubbard
f1141e3b94 Update these files to match current reality. 1999-07-02 17:11:58 +00:00
Matt Jacob
956d0a937a roll firmware for FC 1999-07-02 17:07:39 +00:00
Nick Sayer
4cafb63ac3 Add SSL versions of imap, pop3 and telnet (imaps, pop3s and telnets) 1999-07-02 16:55:04 +00:00
Poul-Henning Kamp
8947a90a90 Make sure that stat(2) and friends always return a valid st_dev field.
Pseudo-FS need not fill in the va_fsid anymore, the syscall code
will use the first half of the fsid, which now looks like a udev_t
with major 255.
1999-07-02 16:29:47 +00:00
Sheldon Hearn
eb0fde47f8 Allow service alias names from /etc/services to be used when specifying
internal services in inetd.conf .

The inetd(8) manpage used to say that the official name of a service
_must_ be used, yet inetd itself was hardcoded to used a service alias for
the auth service, namely ident!

Rather than change inetd.conf and break existing configurations on next
upgrade, we now allow service aliases as well as official names. This
allows the software to work as expected and still support existing
configurations.

This should not breaking existing wrapped configurations either and the
inetd(8) manpage already states that it is the service name specified in
inetd.conf that is used for calls to hosts_access(3).

PR:	11796
Reported by:	Alex Charalabidis <alex@wnm.net>
Approved by:	des
1999-07-02 16:21:13 +00:00
Sheldon Hearn
27fd1dba4e Clarify that the services name, as specified in inetd.conf, for an
internal service should be used as the daemon name when constructing
hosts_access(5) rules.
1999-07-02 15:58:32 +00:00
Bill Fumerola
465ebdc6e3 Add braces to avoid ambigious else. 1999-07-02 15:26:53 +00:00
Ruslan Ermilov
0b7a57dd48 o use getprotobynumber(3) instead of hardcoded protocol names.
Divert(4) sockets will now appear as "internet raw divert"
  instead of "internet raw 254".

o -Wall tweak.

Reviewed by:	bde
1999-07-02 13:25:49 +00:00
Sheldon Hearn
1361b1fd76 Back out previous commit. Allowing `-' as a pseudonym for /dev/stdin is
legacy behaviour inherited from systems that don't have /dev/stdin.

Requested by:	bde
1999-07-02 12:31:31 +00:00
Bruce Evans
95103bc098 Actually fixed ambiguous else. The previous revision had no effect. 1999-07-02 11:20:59 +00:00
Brian Feldman
90331af0d2 "transfered" -> "transferred"
Reviewed by:	dict(1)
1999-07-02 08:57:06 +00:00
Greg Lehey
ec2e2a6723 Remove the volume, plex, sd and drive commands which allowed the user
to bypass the create command.

vinum_stop:
  Allow -f option.

Add commands for simplified configuration:
  concat - create a volume with one concatenated plex
  stripe - create a volume with one striped plex
  mirror - create a volume with two concatenated or striped plexes

Egged-on-by:	  jkh
1999-07-02 08:01:12 +00:00
Greg Lehey
a490e68466 Change the name of the s option to indicate that it wears more than
one hat.

Change formats as the result of changes in drive structure.
1999-07-02 08:00:31 +00:00
Greg Lehey
2c1ba0bcf7 Change the name of the s option to indicate that it wears more than
one hat.

Add -n option for specifying names of volumes created with the
simplified commands.

Add function find_drive_by_devname to help the simplified
configuration commands.
1999-07-02 07:59:45 +00:00
Greg Lehey
738407d497 Document simplified configuration commands. 1999-07-02 07:58:54 +00:00
Greg Lehey
126152b05d Add keywords 'mirror' and 'stripe' when not in kernel mode. 1999-07-02 07:58:09 +00:00
Greg Lehey
e65333e92e Allow to unconditionally up subdisks with the -f option.
Change returns for failed state changes from EINVAL to EBUSY.

Suggested-by:  Bernd Walter <ticso@cicely.de>
1999-07-02 07:57:28 +00:00
Greg Lehey
7d6715c52c Change the type of the freelist sectors variable to u_int64_t in
order to ensure that initializers will be of correct type.
1999-07-02 07:56:47 +00:00
Matt Jacob
89ee7f9210 Correct some ugly formatting. Remember to initialize the alignment tag.
Honor and pass a callers request to contigalloc if they had a non-zero
alignment constraint.
1999-07-02 05:12:11 +00:00
Matt Jacob
ba203c2a6d Fix last delta which reinitialized nextpaddr to zero each time through the
loop it was supposed to be in. Correct some ugly formatting. Remember to
initialize the alignment tag. Honor and pass a callers request to contigalloc
if they had a non-zero alignment constraint.
1999-07-02 05:05:51 +00:00
Jordan K. Hubbard
a741b77965 Fix time of last dump handling.
Submittted by:		Richard Wiwatowski <rjwiwat@ozemail.com.au>
1999-07-02 04:44:43 +00:00
Peter Wemm
e9bc23571b Sync with GENERIC.. (Gee, this is a useful file..) 1999-07-02 04:36:48 +00:00
Peter Wemm
c7430f3904 Zap totally the npx0 memory size override. It only worked if statically
specified in the kernel config file - but setting options MAXMEM works
exactly the same.  Userconfig overrides of this have not worked for
ages.

Also, change the getenv for the loader override to hw.physmem based on a
prior suggestion from Mike Smith.  I think he still wants to change this
some, but this shouldn't get in his way.  This is a forced setting of
the memory size, not a "cap".  We probably should have a plain 'maxmem'
variable as well which does do a cap, without loosing the bios memory
configuration data.
1999-07-02 04:33:05 +00:00