- Alignment issues:
* Add missing __packed attributes + padding across all drivers; in
most places there was an assumption that padding will be always
minimally suitable; in few places - e.g., in urtw(4) / rtwn(4) -
padding was just missing.
* Add __aligned(8) attribute for all Rx radiotap headers since they can
contain 64-bit TSF timestamp; it cannot appear in Tx radiotap headers, so
just drop the attribute here. Refresh ieee80211_radiotap(9) man page
accordingly.
- Since net80211 automatically updates channel frequency / flags in
ieee80211_radiotap_chan_change() drop duplicate setup for these fields
in drivers.
Tested with Netgear WG111 v3 (urtw(4)), STA mode.
MFC after: 2 weeks
Update the members of the doceng team to include ryusuke@ and me.
Sort and reduce number of line breaks so that our bubble in the
chart is a bit more compact (similar to portmgr next to it).
Reminded by: gjb
This permits legacy GDB to still be built and installed if
WITHOUT_BINUTILS is set (e.g. if base/binutils is installed).
Reviewed by: emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19480
With the last core election, matthew@ stepped down and handed over to jrm@ to
serve as new core secretary. Update this file to match.
Approved by: core (implicit)
UEFI related headers were copied from edk2.
A new build option "MK_LOADER_EFI_SECUREBOOT" was added to allow
loading of trusted anchors from UEFI.
Certificate revocation support is also introduced.
The forbidden certificates are loaded from dbx variable.
Verification fails in two cases:
There is a direct match between cert in dbx and the one in the chain.
The CA used to sign the chain is found in dbx.
One can also insert a hash of TBS section of a certificate into dbx.
In this case verifications fails only if a direct match with a
certificate in chain is found.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19093
FDT data. The sector size must be a multiple of the device's page size.
If not configured, use the historical default of the device page size.
Setting the disk sector size to 512 or 4096 allows a variety of standard
filesystems to be used on the device. Of course you wouldn't want to be
writing frequently to a SPI flash chip like it was a disk drive, but for
data that gets written once (or rarely) and read often, using a standard
filesystem is a nice convenient thing.
@cem removed references to pdwait4(2) (a nonexistent syscall) in
r320058.
This change removes references to pdwait4(2) and `CAP_PDWAIT` in
rights(4) to not mislead the user into thinking that pdwait4(2)/`CAP_PDWAIT` is
actually implemented in the stock FreeBSD kernel.
The goal of this functionality was to simplify monitoring/manipulating
processes started with `pdfork`, et al, and avoid races with waiting on pids.
The syscall was never completed though--just discussed on the capsicum mailing
list back in 2015:
https://lists.cam.ac.uk/pipermail/cl-capsicum-discuss/2015-May/msg00012.html
. That being said, there are members of the project (@rwatson, etc) who
have longterm goals to implement this syscall to better secure pdfork(2)
calls.
PR: 235871
Reviewed by: emaste
Discussed with: rwatson
Approved by: emaste (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18950
There are some problem reports possibly related to the new driver use of
multiple interrupts on older cards. Hopefully this allow to workaround
them.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Embedded lzma decompression library becomes a module usable by other
consumers, in addition to geom_uzip.
Most important code changes are
- removal of XZ_DEC_SINGLE define, we need the code to work
with XZ_DEC_DYNALLOC;
- xz_crc32_init() call is removed from geom_uzip, xz module handles
initialization on its own.
xz is no longer embedded into geom_uzip, instead the depend line for
the module is provided, and corresponding kernel option is added to
each MIPS kernel config file using geom_uzip.
The commit also carries unrelated cleanup by removing excess "device geom_uzip"
in places which were missed in r344479.
Reviewed by: cem, hselasky, ray, slavash (previous versions)
Sponsored by: Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D19266
MFC after: 3 weeks
Instead of PRIVATELIB + NO_PIC. This avoids the need for the wlandebug
PIE special case added in r344211, and provides a stronger guarantee
against 3rd party software coming to depend on the API or ABI.
If / when we declare the API/ABI to be stable we can make it a normal
library.
Discussed with: bapt
Sponsored by: The FreeBSD Foundation
Update the diff to include other missing sysctl types found in sysctl.h.
Some of these sysctls are already documented in other pages (e.g counter(9)
and ZONE(9)), but they should at least be mentioned here for completeness.
This patch now documents all of the following:
- SYSCTL_BOOL/SYSCTL_ADD_BOOL
- SYSCTL_COUNTER_U64/SYSCTL_ADD_COUNTER_U64
- SYSCTL_COUNTER_U64_ARRAY/SYSCTL_ADD_COUNTER_U64_ARRAY
- SYSCTL_SBINTIME_MSEC/SYSCTL_ADD_SBINTIME_MSEC
- SYSCTL_SBINTIME_USEC/SYSCTL_ADD_SBINTIME_USEC
- SYSCTL_UMA_CUR/SYSCTL_ADD_UMA_CUR
- SYSCTL_UMA_MAX/SYSCTL_ADD_UMA_MAX
Submitted by: mhorne063_gmail.com
Reviewed by: bcr, hselasky
Approved by: bcr (doc), hselasky (src)
Approved by: krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D19272
for struct ip_mreq remains in place.
The struct ip_mreqn is Linux extension to classic BSD multicast API. It
has extra field allowing to specify the interface index explicitly. In
Linux it used as argument for IP_MULTICAST_IF and IP_ADD_MEMBERSHIP.
FreeBSD kernel also declares this structure and supports it as argument
to IP_MULTICAST_IF since r170613. So, we have structure declared but
not fully supported, this confused third party application configure
scripts.
Code handling IP_ADD_MEMBERSHIP was mixed together with code for
IP_ADD_SOURCE_MEMBERSHIP. Bringing legacy and new structure support
into the mess would made the "argument switcharoo" intolerable, so
code was separated into its own switch case clause.
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D19276
Add or fix options to control static and dynamic configuration. Keep
the default of scteken, but default to statically configuring all available
emulators (now 3 instead of 1).
The dumb emulator is almost usable. libedit and libreadline handle
dumb terminals perfectly for at least shell history. less(1) works
as well as possible except on exit. But curses programs make messes.
The dumb emulator has strange color support, with 2 dumb colors for
normal output but fancy colorization for the cursor, mouse pointer and
(with a non-dumb initial emulator) for low-level console output.
Using the sc emulator instead of the default of scteken fixes at least
the following bugs:
- NUL is a printing character in cons25 but not in teken
- teken doesn't support fixed colors for "reverse" video.
- The best versions of sc are about 10 times faster than scteken (for
printing to the frame buffer). This version is only about 5 times
faster.
Fix configuration features:
- make SC_DFLT_TERM (for setting the initial emulator) a normal option.
Add configuration features:
- negative options SC_NO_TERM_* for omitting emulators in the static config.
Modules for emulators might work, but I don't know of any
- vidcontrol -e shows the available emulators
- vidcontrol -E <emulator> sets the active emulator.
The move to /usr/include/private prefixed paths seems to require a bit more
effort in order to compile programs.
Install the headers to /usr/include/private/g{mock,test}/... and automatically
include /usr/include/private in GTESTS_CXXFLAGS to make compilation seamless. I
will work on the more global problem later with @bdrewery.
A previous iteration referenced/used googletest.test.flags.mk, not
googletest.test.inc.mk. The latter name is what I settled on as this
Makefile snippet can include more logic than flags.
Long story short, some of the tests were failing because they expected either
dynamic_cast or RTTI to be functional and it wasn't.
Move all common CXXFLAGS out to googletest.test.inc.mk and reference it from
googletest.test.mk and .../googletest/Makefile.inc
googletest.test.mk is a rudimentary wrapper around the plain test interface
(for now), which only supports C++ programs, specified by the `GTESTS`
variable.
In the future, kyua will support gtests in a more native manner.
These libraries don't compile on non-C++-11 capable compilers, e.g., g++ 4.2.1
and its corresponding implementation of the c++ library, i.e., libstdc++.
Blacklist compilation on all non-C++-11 capable compilers and give others the
option of opting out of building/installing gmock/gtest via MK_GOOGLETEST.
This option is controlled by MK_CXX and MK_TESTS, as ATF compilation is.
Building binaries as PIE allows the executable itself to be loaded at a
random address when ASLR is enabled (not just its shared libraries).
With this change PIE objects have a .pieo extension and INTERNALLIB
libraries libXXX_pie.a.
MK_PIE is disabled for some kerberos5 tools, Clang, and Subversion, as
they explicitly reference .a libraries in their Makefiles. These can
be addressed on an individual basis later. MK_PIE is also disabled for
rtld-elf because it is already position-independent using bespoke
Makefile rules.
Currently only dynamically linked binaries will be built as PIE.
Discussed with: dim
Reviewed by: kib
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18423
This issue was noticed when running `make manlint` as part of MFCing r342597 to
^/stable/11:
```
$ make -C share/man/man8 rc.8lint
mandoc -Tascii -Tlint rc.8
mandoc: rc.8:548:6: STYLE: referenced manual not found: Xr rc.resume 8
$
```
This is a followup commit to r339818.
Reviewed by: eugen
Approved by: jtl (mentor)
MFC after: 1 week
MFC to: ^/stable/12
Differential Revision: https://reviews.freebsd.org/D19158
