/* * Copyright (c) 1999 Robert Nordier * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #define MBRSIZE 512 /* master boot record size */ #define OFF_VERSION 0x1b0 /* offset: version number */ #define OFF_OPT 0x1b9 /* offset: default boot option */ #define OFF_DRIVE 0x1ba /* offset: setdrv drive */ #define OFF_FLAGS 0x1bb /* offset: option flags */ #define OFF_TICKS 0x1bc /* offset: clock ticks */ #define OFF_PTBL 0x1be /* offset: partition table */ #define OFF_MAGIC 0x1fe /* offset: magic number */ #define cv2(p) ((p)[0] | (p)[1] << 010) #define mk2(p, x) \ (p)[0] = (u_int8_t)(x), \ (p)[1] = (u_int8_t)((x) >> 010) static const struct { const char *tok; int def; } opttbl[] = { {"packet", 1}, {"update", 1}, {"setdrv", 0} }; static const int nopt = sizeof(opttbl) / sizeof(opttbl[0]); static const char fmt0[] = "# flag start chs type" " end chs offset size\n"; static const char fmt1[] = "%d 0x%02x %4u:%3u:%2u 0x%02x" " %4u:%3u:%2u %10u %10u\n"; static int read_mbr(const char *, u_int8_t **, int); static void write_mbr(const char *, int, u_int8_t *, int); static void display_mbr(u_int8_t *); static int boot0version(const u_int8_t *); static int boot0bs(const u_int8_t *); static void stropt(const char *, int *, int *); static char *mkrdev(const char *); static int argtoi(const char *, int, int, int); static void usage(void); /* * Boot manager installation/configuration utility. */ int main(int argc, char *argv[]) { u_int8_t *mbr, *boot0; int boot0_size, mbr_size; const char *bpath, *fpath; char *disk; int B_flag, v_flag, o_flag; int d_arg, m_arg, s_arg, t_arg; int o_and, o_or; int up, c; bpath = "/boot/boot0"; fpath = NULL; B_flag = v_flag = o_flag = 0; d_arg = m_arg = s_arg = t_arg = -1; o_and = 0xff; o_or = 0; while ((c = getopt(argc, argv, "Bvb:d:f:m:o:s:t:")) != -1) switch (c) { case 'B': B_flag = 1; break; case 'v': v_flag = 1; break; case 'b': bpath = optarg; break; case 'd': d_arg = argtoi(optarg, 0, 0xff, 'd'); break; case 'f': fpath = optarg; break; case 'm': m_arg = argtoi(optarg, 0, 0xf, 'm'); break; case 'o': stropt(optarg, &o_and, &o_or); o_flag = 1; break; case 's': s_arg = argtoi(optarg, 1, 5, 's'); break; case 't': t_arg = argtoi(optarg, 1, 0xffff, 't'); break; default: usage(); } argc -= optind; argv += optind; if (argc != 1) usage(); disk = mkrdev(*argv); up = B_flag || d_arg != -1 || m_arg != -1 || o_flag || s_arg != -1 || t_arg != -1; /* open the disk and read in the existing mbr */ mbr_size = read_mbr(disk, &mbr, !B_flag); /* save the existing MBR if we are asked to do so */ if (fpath) write_mbr(fpath, O_CREAT | O_TRUNC, mbr, mbr_size); /* * If we are installing the boot loader, read it from disk and copy the * slice table over from the existing MBR. If not, then point boot0 * back at the MBR we just read in. After this, boot0 is the data to * write back to disk if we are going to do a write. */ if (B_flag) { boot0_size = read_mbr(bpath, &boot0, 1); memcpy(boot0 + OFF_PTBL, mbr + OFF_PTBL, sizeof(struct dos_partition) * NDOSPART); } else { boot0 = mbr; boot0_size = mbr_size; } /* set the drive */ if (d_arg != -1) boot0[OFF_DRIVE] = d_arg; /* set various flags */ if (m_arg != -1) { boot0[OFF_FLAGS] &= 0xf0; boot0[OFF_FLAGS] |= m_arg; } if (o_flag) { boot0[OFF_FLAGS] &= o_and; boot0[OFF_FLAGS] |= o_or; } /* set the default boot selection */ if (s_arg != -1) boot0[OFF_OPT] = s_arg - 1; /* set the timeout */ if (t_arg != -1) mk2(boot0 + OFF_TICKS, t_arg); /* write the MBR back to disk */ if (up) write_mbr(disk, 0, boot0, boot0_size); /* display the MBR */ if (v_flag) display_mbr(boot0); /* clean up */ if (mbr != boot0) free(boot0); free(mbr); free(disk); return 0; } /* * Read in the MBR of the disk. If it is boot0, then use the version to * read in all of it if necessary. Use pointers to return a malloc'd * buffer containing the MBR and then return its size. */ static int read_mbr(const char *disk, u_int8_t **mbr, int check_version) { u_int8_t buf[MBRSIZE]; int mbr_size, fd; ssize_t n; if ((fd = open(disk, O_RDONLY)) == -1) err(1, "open %s", disk); if ((n = read(fd, buf, MBRSIZE)) == -1) err(1, "read %s", disk); if (n != MBRSIZE) errx(1, "%s: short read", disk); if (cv2(buf + OFF_MAGIC) != 0xaa55) errx(1, "%s: bad magic", disk); if (!boot0bs(buf)) { if (check_version) errx(1, "%s: unknown or incompatible boot code", disk); } else if (boot0version(buf) == 0x101) { mbr_size = 1024; if ((*mbr = malloc(mbr_size)) == NULL) errx(1, "%s: unable to allocate read buffer", disk); if (lseek(fd, 0, SEEK_SET) == -1 || (n = read(fd, *mbr, mbr_size)) == -1) err(1, "%s", disk); if (n != mbr_size) errx(1, "%s: short read", disk); return (mbr_size); } *mbr = malloc(sizeof(buf)); memcpy(*mbr, buf, sizeof(buf)); return sizeof(buf); } /* * Write out the mbr to the specified file. */ static void write_mbr(const char *fname, int flags, u_int8_t *mbr, int mbr_size) { int fd, p; ssize_t n; char *s; fd = open(fname, O_WRONLY | flags, 0666); if (fd != -1) { n = write(fd, mbr, mbr_size); close(fd); if (n != mbr_size) errx(1, "%s: short write", fname); return; } if (flags != 0) err(1, "%s", fname); #ifdef DIOCSMBR for (p = 1; p < 5; p++) { asprintf(&s, "%ss%d", fname, p); fd = open(s, O_RDONLY); if (fd < 0) { free(s); continue; } n = ioctl(fd, DIOCSMBR, (mbr)); if (n != 0) err(1, "%s: ioctl DIOCSMBR", fname); close(fd); free(s); return; } #endif err(1, "write_mbr: %s", fname); } /* * Outputs an informative dump of the data in the MBR to stdout. */ static void display_mbr(u_int8_t *mbr) { struct dos_partition *part; int i, version; part = (struct dos_partition *)(mbr + DOSPARTOFF); printf(fmt0); for (i = 0; i < NDOSPART; i++) if (part[i].dp_typ) printf(fmt1, 1 + i, part[i].dp_flag, part[i].dp_scyl + ((part[i].dp_ssect & 0xc0) << 2), part[i].dp_shd, part[i].dp_ssect & 0x3f, part[i].dp_typ, part[i].dp_ecyl + ((part[i].dp_esect & 0xc0) << 2), part[i].dp_ehd, part[i].dp_esect & 0x3f, part[i].dp_start, part[i].dp_size); printf("\n"); version = boot0version(mbr); printf("version=%d.%d drive=0x%x mask=0x%x ticks=%u\noptions=", version >> 8, version & 0xff, mbr[OFF_DRIVE], mbr[OFF_FLAGS] & 0xf, cv2(mbr + OFF_TICKS)); for (i = 0; i < nopt; i++) { if (i) printf(","); if (!(mbr[OFF_FLAGS] & 1 << (7 - i)) ^ opttbl[i].def) printf("no"); printf("%s", opttbl[i].tok); } printf("\n"); printf("default_selection=F%d (", mbr[OFF_OPT] + 1); if (mbr[OFF_OPT] < 4) printf("Slice %d", mbr[OFF_OPT] + 1); else printf("Drive 1"); printf(")\n"); } /* * Return the boot0 version with the minor revision in the low byte, and * the major revision in the next higher byte. */ static int boot0version(const u_int8_t *bs) { static u_int8_t idold[] = {0xfe, 0x45, 0xf2, 0xe9, 0x00, 0x8a}; /* Check for old version, and return 0x100 if found. */ if (memcmp(bs + 0x1c, idold, sizeof(idold)) == 0) return 0x100; /* We have a newer boot0, so extract the version number and return it. */ return *(const int *)(bs + OFF_VERSION) & 0xffff; } /* * Decide if we have valid boot0 boot code by looking for * characteristic byte sequences at fixed offsets. */ static int boot0bs(const u_int8_t *bs) { static u_int8_t id0[] = {0xfc, 0x31, 0xc0, 0x8e, 0xc0, 0x8e, 0xd8, 0x8e, 0xd0, 0xbc, 0x00, 0x7c }; static u_int8_t id1[] = {'D', 'r', 'i', 'v', 'e', ' '}; static struct { unsigned off; unsigned len; u_int8_t *key; } ident[2] = { {0x0, sizeof(id0), id0}, {0x1b2, sizeof(id1), id1} }; unsigned int i; for (i = 0; i < sizeof(ident) / sizeof(ident[0]); i++) if (memcmp(bs + ident[i].off, ident[i].key, ident[i].len)) return 0; return 1; } /* * Adjust "and" and "or" masks for a -o option argument. */ static void stropt(const char *arg, int *xa, int *xo) { const char *q; char *s, *s1; int inv, i, x; if (!(s = strdup(arg))) err(1, NULL); for (s1 = s; (q = strtok(s1, ",")); s1 = NULL) { if ((inv = !strncmp(q, "no", 2))) q += 2; for (i = 0; i < nopt; i++) if (!strcmp(q, opttbl[i].tok)) break; if (i == nopt) errx(1, "%s: Unknown -o option", q); if (opttbl[i].def) inv ^= 1; x = 1 << (7 - i); if (inv) *xa &= ~x; else *xo |= x; } free(s); } /* * Produce a device path for a "canonical" name, where appropriate. */ static char * mkrdev(const char *fname) { char buf[MAXPATHLEN]; char *s; if (!strchr(fname, '/')) { snprintf(buf, sizeof(buf), "%s%s", _PATH_DEV, fname); s = strdup(buf); } else s = strdup(fname); if (s == NULL) errx(1, "No more memory"); return s; } /* * Convert and check an option argument. */ static int argtoi(const char *arg, int lo, int hi, int opt) { char *s; long x; errno = 0; x = strtol(arg, &s, 0); if (errno || !*arg || *s || x < lo || x > hi) errx(1, "%s: Bad argument to -%c option", arg, opt); return x; } /* * Display usage information. */ static void usage(void) { fprintf(stderr, "%s\n%s\n", "usage: boot0cfg [-Bv] [-b boot0] [-d drive] [-f file] [-m mask]", " [-o options] [-s slice] [-t ticks] disk"); exit(1); }