/* * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Don Ahn. * * Libretto PCMCIA floppy support by David Horwitt (dhorwitt@ucsd.edu) * aided by the Linux floppy driver modifications from David Bateman * (dbateman@eng.uts.edu.au). * * Copyright (c) 1993, 1994 by * jc@irbs.UUCP (John Capo) * vak@zebub.msk.su (Serge Vakulenko) * ache@astral.msk.su (Andrew A. Chernov) * * Copyright (c) 1993, 1994, 1995 by * joerg_wunsch@uriah.sax.de (Joerg Wunsch) * dufault@hda.com (Peter Dufault) * * Copyright (c) 2001 Joerg Wunsch, * joerg_wunsch@uriah.heep.sax.de (Joerg Wunsch) * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)fd.c 7.4 (Berkeley) 5/25/91 */ #include __FBSDID("$FreeBSD$"); #include "opt_fdc.h" #include "card.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include enum fdc_type { FDC_NE765, FDC_ENHANCED, FDC_UNKNOWN = -1 }; enum fdc_states { DEVIDLE, FINDWORK, DOSEEK, SEEKCOMPLETE , IOCOMPLETE, RECALCOMPLETE, STARTRECAL, RESETCTLR, SEEKWAIT, RECALWAIT, MOTORWAIT, IOTIMEDOUT, RESETCOMPLETE, PIOREAD }; #ifdef FDC_DEBUG static char const * const fdstates[] = { "DEVIDLE", "FINDWORK", "DOSEEK", "SEEKCOMPLETE", "IOCOMPLETE", "RECALCOMPLETE", "STARTRECAL", "RESETCTLR", "SEEKWAIT", "RECALWAIT", "MOTORWAIT", "IOTIMEDOUT", "RESETCOMPLETE", "PIOREAD" }; #endif /* * Per controller structure (softc). */ struct fdc_data { int fdcu; /* our unit number */ int dmachan; int flags; #define FDC_ATTACHED 0x01 #define FDC_STAT_VALID 0x08 #define FDC_HAS_FIFO 0x10 #define FDC_NEEDS_RESET 0x20 #define FDC_NODMA 0x40 #define FDC_ISPNP 0x80 #define FDC_ISPCMCIA 0x100 struct fd_data *fd; int fdu; /* the active drive */ enum fdc_states state; int retry; int fdout; /* mirror of the w/o digital output reg */ u_int status[7]; /* copy of the registers */ enum fdc_type fdct; /* chip version of FDC */ int fdc_errs; /* number of logged errors */ int dma_overruns; /* number of DMA overruns */ struct bio_queue_head head; struct bio *bp; /* active buffer */ struct resource *res_ioport, *res_ctl, *res_irq, *res_drq; int rid_ioport, rid_ctl, rid_irq, rid_drq; int port_off; bus_space_tag_t portt; bus_space_handle_t porth; bus_space_tag_t ctlt; bus_space_handle_t ctlh; void *fdc_intr; struct device *fdc_dev; void (*fdctl_wr)(struct fdc_data *fdc, u_int8_t v); }; #define FDBIO_FORMAT BIO_CMD2 typedef int fdu_t; typedef int fdcu_t; typedef int fdsu_t; typedef struct fd_data *fd_p; typedef struct fdc_data *fdc_p; typedef enum fdc_type fdc_t; #define FDUNIT(s) (((s) >> 6) & 3) #define FDNUMTOUNIT(n) (((n) & 3) << 6) #define FDTYPE(s) ((s) & 0x3f) /* * fdc maintains a set (1!) of ivars per child of each controller. */ enum fdc_device_ivars { FDC_IVAR_FDUNIT, }; /* * Simple access macros for the ivars. */ #define FDC_ACCESSOR(A, B, T) \ static __inline T fdc_get_ ## A(device_t dev) \ { \ uintptr_t v; \ BUS_READ_IVAR(device_get_parent(dev), dev, FDC_IVAR_ ## B, &v); \ return (T) v; \ } FDC_ACCESSOR(fdunit, FDUNIT, int) /* configuration flags for fdc */ #define FDC_NO_FIFO (1 << 2) /* do not enable FIFO */ /* error returns for fd_cmd() */ #define FD_FAILED -1 #define FD_NOT_VALID -2 #define FDC_ERRMAX 100 /* do not log more */ /* * Stop retrying after this many DMA overruns. Since each retry takes * one revolution, with 300 rpm., 25 retries take approximately 5 * seconds which the read attempt will block in case the DMA overrun * is persistent. */ #define FDC_DMAOV_MAX 25 /* * Timeout value for the PIO loops to wait until the FDC main status * register matches our expectations (request for master, direction * bit). This is supposed to be a number of microseconds, although * timing might actually not be very accurate. * * Timeouts of 100 msec are believed to be required for some broken * (old) hardware. */ #define FDSTS_TIMEOUT 100000 /* * Number of subdevices that can be used for different density types. * By now, the lower 6 bit of the minor number are reserved for this, * allowing for up to 64 subdevices, but we only use 16 out of this. * Density #0 is used for automatic format detection, the other * densities are available as programmable densities (for assignment * by fdcontrol(8)). * The upper 2 bits of the minor number are reserved for the subunit * (drive #) per controller. */ #define NUMDENS 16 #define FDBIO_RDSECTID BIO_CMD1 /* * List of native drive densities. Order must match enum fd_drivetype * in . Upon attaching the drive, each of the * programmable subdevices is initialized with the native density * definition. */ static struct fd_type fd_native_types[] = { { 0 }, /* FDT_NONE */ { 9,2,0xFF,0x2A,40, 720,FDC_250KBPS,2,0x50,1,0,FL_MFM }, /* FDT_360K */ { 15,2,0xFF,0x1B,80,2400,FDC_500KBPS,2,0x54,1,0,FL_MFM }, /* FDT_12M */ { 9,2,0xFF,0x20,80,1440,FDC_250KBPS,2,0x50,1,0,FL_MFM }, /* FDT_720K */ { 18,2,0xFF,0x1B,80,2880,FDC_500KBPS,2,0x6C,1,0,FL_MFM }, /* FDT_144M */ #if 0 /* we currently don't handle 2.88 MB */ { 36,2,0xFF,0x1B,80,5760,FDC_1MBPS, 2,0x4C,1,1,FL_MFM|FL_PERPND } /*FDT_288M*/ #else { 18,2,0xFF,0x1B,80,2880,FDC_500KBPS,2,0x6C,1,0,FL_MFM }, /* FDT_144M */ #endif }; /* * 360 KB 5.25" and 720 KB 3.5" drives don't have automatic density * selection, they just start out with their native density (or lose). * So 1.2 MB 5.25", 1.44 MB 3.5", and 2.88 MB 3.5" drives have their * respective lists of densities to search for. */ static struct fd_type fd_searchlist_12m[] = { { 15,2,0xFF,0x1B,80,2400,FDC_500KBPS,2,0x54,1,0,FL_MFM }, /* 1.2M */ { 9,2,0xFF,0x23,40, 720,FDC_300KBPS,2,0x50,1,0,FL_MFM|FL_2STEP }, /* 360K */ { 9,2,0xFF,0x20,80,1440,FDC_300KBPS,2,0x50,1,0,FL_MFM }, /* 720K */ }; static struct fd_type fd_searchlist_144m[] = { { 18,2,0xFF,0x1B,80,2880,FDC_500KBPS,2,0x6C,1,0,FL_MFM }, /* 1.44M */ { 9,2,0xFF,0x20,80,1440,FDC_250KBPS,2,0x50,1,0,FL_MFM }, /* 720K */ }; /* We search for 1.44M first since this is the most common case. */ static struct fd_type fd_searchlist_288m[] = { { 18,2,0xFF,0x1B,80,2880,FDC_500KBPS,2,0x6C,1,0,FL_MFM }, /* 1.44M */ #if 0 { 36,2,0xFF,0x1B,80,5760,FDC_1MBPS, 2,0x4C,1,1,FL_MFM|FL_PERPND } /* 2.88M */ #endif { 9,2,0xFF,0x20,80,1440,FDC_250KBPS,2,0x50,1,0,FL_MFM }, /* 720K */ }; #define MAX_SEC_SIZE (128 << 3) #define MAX_CYLINDER 85 /* some people really stress their drives * up to cyl 82 */ #define MAX_HEAD 1 static devclass_t fdc_devclass; /* * Per drive structure (softc). */ struct fd_data { struct fdc_data *fdc; /* pointer to controller structure */ int fdsu; /* this units number on this controller */ enum fd_drivetype type; /* drive type */ struct fd_type *ft; /* pointer to current type descriptor */ struct fd_type fts[NUMDENS]; /* type descriptors */ int flags; #define FD_OPEN 0x01 /* it's open */ #define FD_NONBLOCK 0x02 /* O_NONBLOCK set */ #define FD_ACTIVE 0x04 /* it's active */ #define FD_MOTOR 0x08 /* motor should be on */ #define FD_MOTOR_WAIT 0x10 /* motor coming up */ #define FD_UA 0x20 /* force unit attention */ int skip; int hddrv; #define FD_NO_TRACK -2 int track; /* where we think the head is */ int options; /* user configurable options, see fdcio.h */ struct callout_handle toffhandle; struct callout_handle tohandle; struct devstat *device_stats; dev_t masterdev; #ifdef GONE_IN_5 eventhandler_tag clonetag; dev_t clonedevs[NUMDENS - 1]; #endif device_t dev; fdu_t fdu; }; struct fdc_ivars { int fdunit; }; static devclass_t fd_devclass; /* configuration flags for fd */ #define FD_TYPEMASK 0x0f /* drive type, matches enum * fd_drivetype; on i386 machines, if * given as 0, use RTC type for fd0 * and fd1 */ #define FD_DTYPE(flags) ((flags) & FD_TYPEMASK) #define FD_NO_CHLINE 0x10 /* drive does not support changeline * aka. unit attention */ #define FD_NO_PROBE 0x20 /* don't probe drive (seek test), just * assume it is there */ /* * Throughout this file the following conventions will be used: * * fd is a pointer to the fd_data struct for the drive in question * fdc is a pointer to the fdc_data struct for the controller * fdu is the floppy drive unit number * fdcu is the floppy controller unit number * fdsu is the floppy drive unit number on that controller. (sub-unit) */ /* * Function declarations, same (chaotic) order as they appear in the * file. Re-ordering is too late now, it would only obfuscate the * diffs against old and offspring versions (like the PC98 one). * * Anyone adding functions here, please keep this sequence the same * as below -- makes locating a particular function in the body much * easier. */ static void fdout_wr(fdc_p, u_int8_t); static u_int8_t fdsts_rd(fdc_p); static void fddata_wr(fdc_p, u_int8_t); static u_int8_t fddata_rd(fdc_p); static void fdctl_wr_isa(fdc_p, u_int8_t); #if NCARD > 0 static void fdctl_wr_pcmcia(fdc_p, u_int8_t); #endif #if 0 static u_int8_t fdin_rd(fdc_p); #endif static int fdc_err(struct fdc_data *, const char *); static int fd_cmd(struct fdc_data *, int, ...); static int enable_fifo(fdc_p fdc); static int fd_sense_drive_status(fdc_p, int *); static int fd_sense_int(fdc_p, int *, int *); static int fd_read_status(fdc_p); static int fdc_alloc_resources(struct fdc_data *); static void fdc_release_resources(struct fdc_data *); static int fdc_read_ivar(device_t, device_t, int, uintptr_t *); static int fdc_probe(device_t); #if NCARD > 0 static int fdc_pccard_probe(device_t); #endif static int fdc_detach(device_t dev); static void fdc_add_child(device_t, const char *, int); static int fdc_attach(device_t); static int fdc_print_child(device_t, device_t); #ifdef GONE_IN_5 static void fd_clone (void *, char *, int, dev_t *); #endif static int fd_probe(device_t); static int fd_attach(device_t); static int fd_detach(device_t); static void set_motor(struct fdc_data *, int, int); # define TURNON 1 # define TURNOFF 0 static timeout_t fd_turnoff; static timeout_t fd_motor_on; static void fd_turnon(struct fd_data *); static void fdc_reset(fdc_p); static int fd_in(struct fdc_data *, int *); static int out_fdc(struct fdc_data *, int); /* * The open function is named Fdopen() to avoid confusion with fdopen() * in fd(4). The difference is now only meaningful for debuggers. */ static d_open_t Fdopen; static d_close_t fdclose; static d_strategy_t fdstrategy; static void fdstart(struct fdc_data *); static timeout_t fd_iotimeout; static timeout_t fd_pseudointr; static driver_intr_t fdc_intr; static int fdcpio(fdc_p, long, caddr_t, u_int); static int fdautoselect(dev_t); static int fdstate(struct fdc_data *); static int retrier(struct fdc_data *); static void fdbiodone(struct bio *); static int fdmisccmd(dev_t, u_int, void *); static d_ioctl_t fdioctl; static int fifo_threshold = 8; /* XXX: should be accessible via sysctl */ #ifdef FDC_DEBUG /* CAUTION: fd_debug causes huge amounts of logging output */ static int volatile fd_debug = 0; #define TRACE0(arg) do { if (fd_debug) printf(arg); } while (0) #define TRACE1(arg1, arg2) do { if (fd_debug) printf(arg1, arg2); } while (0) #else /* FDC_DEBUG */ #define TRACE0(arg) do { } while (0) #define TRACE1(arg1, arg2) do { } while (0) #endif /* FDC_DEBUG */ /* * Bus space handling (access to low-level IO). */ static void fdout_wr(fdc_p fdc, u_int8_t v) { bus_space_write_1(fdc->portt, fdc->porth, FDOUT+fdc->port_off, v); } static u_int8_t fdsts_rd(fdc_p fdc) { return bus_space_read_1(fdc->portt, fdc->porth, FDSTS+fdc->port_off); } static void fddata_wr(fdc_p fdc, u_int8_t v) { bus_space_write_1(fdc->portt, fdc->porth, FDDATA+fdc->port_off, v); } static u_int8_t fddata_rd(fdc_p fdc) { return bus_space_read_1(fdc->portt, fdc->porth, FDDATA+fdc->port_off); } static void fdctl_wr_isa(fdc_p fdc, u_int8_t v) { bus_space_write_1(fdc->ctlt, fdc->ctlh, 0, v); } #if NCARD > 0 static void fdctl_wr_pcmcia(fdc_p fdc, u_int8_t v) { bus_space_write_1(fdc->portt, fdc->porth, FDCTL+fdc->port_off, v); } #endif static u_int8_t fdin_rd(fdc_p fdc) { return bus_space_read_1(fdc->portt, fdc->porth, FDIN); } #define CDEV_MAJOR 9 static struct cdevsw fd_cdevsw = { .d_open = Fdopen, .d_close = fdclose, .d_read = physread, .d_write = physwrite, .d_ioctl = fdioctl, .d_strategy = fdstrategy, .d_name = "fd", .d_maj = CDEV_MAJOR, .d_flags = D_DISK, }; /* * Auxiliary functions. Well, some only. Others are scattered * throughout the entire file. */ static int fdc_err(struct fdc_data *fdc, const char *s) { fdc->fdc_errs++; if (s) { if (fdc->fdc_errs < FDC_ERRMAX) device_printf(fdc->fdc_dev, "%s", s); else if (fdc->fdc_errs == FDC_ERRMAX) device_printf(fdc->fdc_dev, "too many errors, not " "logging any more\n"); } return FD_FAILED; } /* * fd_cmd: Send a command to the chip. Takes a varargs with this structure: * Unit number, * # of output bytes, output bytes as ints ..., * # of input bytes, input bytes as ints ... */ static int fd_cmd(struct fdc_data *fdc, int n_out, ...) { u_char cmd; int n_in; int n; va_list ap; va_start(ap, n_out); cmd = (u_char)(va_arg(ap, int)); va_end(ap); va_start(ap, n_out); for (n = 0; n < n_out; n++) { if (out_fdc(fdc, va_arg(ap, int)) < 0) { char msg[50]; snprintf(msg, sizeof(msg), "cmd %x failed at out byte %d of %d\n", cmd, n + 1, n_out); return fdc_err(fdc, msg); } } n_in = va_arg(ap, int); for (n = 0; n < n_in; n++) { int *ptr = va_arg(ap, int *); if (fd_in(fdc, ptr) < 0) { char msg[50]; snprintf(msg, sizeof(msg), "cmd %02x failed at in byte %d of %d\n", cmd, n + 1, n_in); return fdc_err(fdc, msg); } } return 0; } static int enable_fifo(fdc_p fdc) { int i, j; if ((fdc->flags & FDC_HAS_FIFO) == 0) { /* * Cannot use fd_cmd the normal way here, since * this might be an invalid command. Thus we send the * first byte, and check for an early turn of data directon. */ if (out_fdc(fdc, I8207X_CONFIGURE) < 0) return fdc_err(fdc, "Enable FIFO failed\n"); /* If command is invalid, return */ j = FDSTS_TIMEOUT; while ((i = fdsts_rd(fdc) & (NE7_DIO | NE7_RQM)) != NE7_RQM && j-- > 0) { if (i == (NE7_DIO | NE7_RQM)) { fdc_reset(fdc); return FD_FAILED; } DELAY(1); } if (j<0 || fd_cmd(fdc, 3, 0, (fifo_threshold - 1) & 0xf, 0, 0) < 0) { fdc_reset(fdc); return fdc_err(fdc, "Enable FIFO failed\n"); } fdc->flags |= FDC_HAS_FIFO; return 0; } if (fd_cmd(fdc, 4, I8207X_CONFIGURE, 0, (fifo_threshold - 1) & 0xf, 0, 0) < 0) return fdc_err(fdc, "Re-enable FIFO failed\n"); return 0; } static int fd_sense_drive_status(fdc_p fdc, int *st3p) { int st3; if (fd_cmd(fdc, 2, NE7CMD_SENSED, fdc->fdu, 1, &st3)) { return fdc_err(fdc, "Sense Drive Status failed\n"); } if (st3p) *st3p = st3; return 0; } static int fd_sense_int(fdc_p fdc, int *st0p, int *cylp) { int cyl, st0, ret; ret = fd_cmd(fdc, 1, NE7CMD_SENSEI, 1, &st0); if (ret) { (void)fdc_err(fdc, "sense intr err reading stat reg 0\n"); return ret; } if (st0p) *st0p = st0; if ((st0 & NE7_ST0_IC) == NE7_ST0_IC_IV) { /* * There doesn't seem to have been an interrupt. */ return FD_NOT_VALID; } if (fd_in(fdc, &cyl) < 0) { return fdc_err(fdc, "can't get cyl num\n"); } if (cylp) *cylp = cyl; return 0; } static int fd_read_status(fdc_p fdc) { int i, ret; for (i = ret = 0; i < 7; i++) { /* * XXX types are poorly chosen. Only bytes can be read * from the hardware, but fdc->status[] wants u_ints and * fd_in() gives ints. */ int status; ret = fd_in(fdc, &status); fdc->status[i] = status; if (ret != 0) break; } if (ret == 0) fdc->flags |= FDC_STAT_VALID; else fdc->flags &= ~FDC_STAT_VALID; return ret; } static int fdc_alloc_resources(struct fdc_data *fdc) { device_t dev; int ispnp, ispcmcia, nports; dev = fdc->fdc_dev; ispnp = (fdc->flags & FDC_ISPNP) != 0; ispcmcia = (fdc->flags & FDC_ISPCMCIA) != 0; fdc->rid_ioport = fdc->rid_irq = fdc->rid_drq = 0; fdc->res_ioport = fdc->res_irq = fdc->res_drq = 0; /* * On standard ISA, we don't just use an 8 port range * (e.g. 0x3f0-0x3f7) since that covers an IDE control * register at 0x3f6. * * Isn't PC hardware wonderful. * * The Y-E Data PCMCIA FDC doesn't have this problem, it * uses the register with offset 6 for pseudo-DMA, and the * one with offset 7 as control register. */ nports = ispcmcia ? 8 : (ispnp ? 1 : 6); fdc->res_ioport = bus_alloc_resource(dev, SYS_RES_IOPORT, &fdc->rid_ioport, 0ul, ~0ul, nports, RF_ACTIVE); if (fdc->res_ioport == 0) { device_printf(dev, "cannot reserve I/O port range (%d ports)\n", nports); return ENXIO; } fdc->portt = rman_get_bustag(fdc->res_ioport); fdc->porth = rman_get_bushandle(fdc->res_ioport); if (!ispcmcia) { /* * Some BIOSen report the device at 0x3f2-0x3f5,0x3f7 * and some at 0x3f0-0x3f5,0x3f7. We detect the former * by checking the size and adjust the port address * accordingly. */ if (bus_get_resource_count(dev, SYS_RES_IOPORT, 0) == 4) fdc->port_off = -2; /* * Register the control port range as rid 1 if it * isn't there already. Most PnP BIOSen will have * already done this but non-PnP configurations don't. * * And some (!!) report 0x3f2-0x3f5 and completely * leave out the control register! It seems that some * non-antique controller chips have a different * method of programming the transfer speed which * doesn't require the control register, but it's * mighty bogus as the chip still responds to the * address for the control register. */ if (bus_get_resource_count(dev, SYS_RES_IOPORT, 1) == 0) { u_long ctlstart; /* Find the control port, usually 0x3f7 */ ctlstart = rman_get_start(fdc->res_ioport) + fdc->port_off + 7; bus_set_resource(dev, SYS_RES_IOPORT, 1, ctlstart, 1); } /* * Now (finally!) allocate the control port. */ fdc->rid_ctl = 1; fdc->res_ctl = bus_alloc_resource(dev, SYS_RES_IOPORT, &fdc->rid_ctl, 0ul, ~0ul, 1, RF_ACTIVE); if (fdc->res_ctl == 0) { device_printf(dev, "cannot reserve control I/O port range (control port)\n"); return ENXIO; } fdc->ctlt = rman_get_bustag(fdc->res_ctl); fdc->ctlh = rman_get_bushandle(fdc->res_ctl); } fdc->res_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &fdc->rid_irq, 0ul, ~0ul, 1, RF_ACTIVE); if (fdc->res_irq == 0) { device_printf(dev, "cannot reserve interrupt line\n"); return ENXIO; } if ((fdc->flags & FDC_NODMA) == 0) { fdc->res_drq = bus_alloc_resource(dev, SYS_RES_DRQ, &fdc->rid_drq, 0ul, ~0ul, 1, RF_ACTIVE); if (fdc->res_drq == 0) { device_printf(dev, "cannot reserve DMA request line\n"); return ENXIO; } fdc->dmachan = fdc->res_drq->r_start; } return 0; } static void fdc_release_resources(struct fdc_data *fdc) { device_t dev; dev = fdc->fdc_dev; if (fdc->res_irq != 0) { bus_deactivate_resource(dev, SYS_RES_IRQ, fdc->rid_irq, fdc->res_irq); bus_release_resource(dev, SYS_RES_IRQ, fdc->rid_irq, fdc->res_irq); } if (fdc->res_ctl != 0) { bus_deactivate_resource(dev, SYS_RES_IOPORT, fdc->rid_ctl, fdc->res_ctl); bus_release_resource(dev, SYS_RES_IOPORT, fdc->rid_ctl, fdc->res_ctl); } if (fdc->res_ioport != 0) { bus_deactivate_resource(dev, SYS_RES_IOPORT, fdc->rid_ioport, fdc->res_ioport); bus_release_resource(dev, SYS_RES_IOPORT, fdc->rid_ioport, fdc->res_ioport); } if (fdc->res_drq != 0) { bus_deactivate_resource(dev, SYS_RES_DRQ, fdc->rid_drq, fdc->res_drq); bus_release_resource(dev, SYS_RES_DRQ, fdc->rid_drq, fdc->res_drq); } } /* * Configuration/initialization stuff, per controller. */ static struct isa_pnp_id fdc_ids[] = { {0x0007d041, "PC standard floppy disk controller"}, /* PNP0700 */ {0x0107d041, "Standard floppy controller supporting MS Device Bay Spec"}, /* PNP0701 */ {0} }; static int fdc_read_ivar(device_t dev, device_t child, int which, uintptr_t *result) { struct fdc_ivars *ivars = device_get_ivars(child); switch (which) { case FDC_IVAR_FDUNIT: *result = ivars->fdunit; break; default: return ENOENT; } return 0; } static int fdc_probe(device_t dev) { int error, ic_type; struct fdc_data *fdc; fdc = device_get_softc(dev); bzero(fdc, sizeof *fdc); fdc->fdc_dev = dev; fdc->fdctl_wr = fdctl_wr_isa; /* Check pnp ids */ error = ISA_PNP_PROBE(device_get_parent(dev), dev, fdc_ids); if (error == ENXIO) return ENXIO; if (error == 0) fdc->flags |= FDC_ISPNP; /* Attempt to allocate our resources for the duration of the probe */ error = fdc_alloc_resources(fdc); if (error) goto out; /* First - lets reset the floppy controller */ fdout_wr(fdc, 0); DELAY(100); fdout_wr(fdc, FDO_FRST); /* see if it can handle a command */ if (fd_cmd(fdc, 3, NE7CMD_SPECIFY, NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0), 0)) { error = ENXIO; goto out; } if (fd_cmd(fdc, 1, NE7CMD_VERSION, 1, &ic_type) == 0) { ic_type = (u_char)ic_type; switch (ic_type) { case 0x80: device_set_desc(dev, "NEC 765 or clone"); fdc->fdct = FDC_NE765; break; case 0x81: /* not mentioned in any hardware doc */ case 0x90: device_set_desc(dev, "Enhanced floppy controller (i82077, NE72065 or clone)"); fdc->fdct = FDC_ENHANCED; break; default: device_set_desc(dev, "Generic floppy controller"); fdc->fdct = FDC_UNKNOWN; break; } } out: fdc_release_resources(fdc); return (error); } #if NCARD > 0 static int fdc_pccard_probe(device_t dev) { int error; struct fdc_data *fdc; fdc = device_get_softc(dev); bzero(fdc, sizeof *fdc); fdc->fdc_dev = dev; fdc->fdctl_wr = fdctl_wr_pcmcia; fdc->flags |= FDC_ISPCMCIA | FDC_NODMA; /* Attempt to allocate our resources for the duration of the probe */ error = fdc_alloc_resources(fdc); if (error) goto out; /* First - lets reset the floppy controller */ fdout_wr(fdc, 0); DELAY(100); fdout_wr(fdc, FDO_FRST); /* see if it can handle a command */ if (fd_cmd(fdc, 3, NE7CMD_SPECIFY, NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0), 0)) { error = ENXIO; goto out; } device_set_desc(dev, "Y-E Data PCMCIA floppy"); fdc->fdct = FDC_NE765; out: fdc_release_resources(fdc); return (error); } #endif /* NCARD > 0 */ static int fdc_detach(device_t dev) { struct fdc_data *fdc; int error; fdc = device_get_softc(dev); /* have our children detached first */ if ((error = bus_generic_detach(dev))) return (error); /* reset controller, turn motor off */ fdout_wr(fdc, 0); if ((fdc->flags & FDC_NODMA) == 0) isa_dma_release(fdc->dmachan); if ((fdc->flags & FDC_ATTACHED) == 0) { device_printf(dev, "already unloaded\n"); return (0); } fdc->flags &= ~FDC_ATTACHED; BUS_TEARDOWN_INTR(device_get_parent(dev), dev, fdc->res_irq, fdc->fdc_intr); fdc_release_resources(fdc); device_printf(dev, "unload\n"); return (0); } /* * Add a child device to the fdc controller. It will then be probed etc. */ static void fdc_add_child(device_t dev, const char *name, int unit) { int flags; struct fdc_ivars *ivar; device_t child; ivar = malloc(sizeof *ivar, M_DEVBUF /* XXX */, M_NOWAIT | M_ZERO); if (ivar == NULL) return; if (resource_int_value(name, unit, "drive", &ivar->fdunit) != 0) ivar->fdunit = 0; child = device_add_child(dev, name, unit); if (child == NULL) { free(ivar, M_DEVBUF); return; } device_set_ivars(child, ivar); if (resource_int_value(name, unit, "flags", &flags) == 0) device_set_flags(child, flags); if (resource_disabled(name, unit)) device_disable(child); } static int fdc_attach(device_t dev) { struct fdc_data *fdc; const char *name, *dname; int i, error, dunit; fdc = device_get_softc(dev); error = fdc_alloc_resources(fdc); if (error) { device_printf(dev, "cannot re-acquire resources\n"); return error; } error = BUS_SETUP_INTR(device_get_parent(dev), dev, fdc->res_irq, INTR_TYPE_BIO | INTR_ENTROPY, fdc_intr, fdc, &fdc->fdc_intr); if (error) { device_printf(dev, "cannot setup interrupt\n"); return error; } fdc->fdcu = device_get_unit(dev); fdc->flags |= FDC_ATTACHED | FDC_NEEDS_RESET; if ((fdc->flags & FDC_NODMA) == 0) { /* * Acquire the DMA channel forever, the driver will do * the rest * XXX should integrate with rman */ isa_dma_acquire(fdc->dmachan); isa_dmainit(fdc->dmachan, MAX_SEC_SIZE); } fdc->state = DEVIDLE; /* reset controller, turn motor off, clear fdout mirror reg */ fdout_wr(fdc, fdc->fdout = 0); bioq_init(&fdc->head); /* * Probe and attach any children. We should probably detect * devices from the BIOS unless overridden. */ name = device_get_nameunit(dev); i = 0; while ((resource_find_match(&i, &dname, &dunit, "at", name)) == 0) fdc_add_child(dev, dname, dunit); if ((error = bus_generic_attach(dev)) != 0) return (error); return (0); } static int fdc_print_child(device_t me, device_t child) { int retval = 0, flags; retval += bus_print_child_header(me, child); retval += printf(" on %s drive %d", device_get_nameunit(me), fdc_get_fdunit(child)); if ((flags = device_get_flags(me)) != 0) retval += printf(" flags %#x", flags); retval += printf("\n"); return (retval); } static device_method_t fdc_methods[] = { /* Device interface */ DEVMETHOD(device_probe, fdc_probe), DEVMETHOD(device_attach, fdc_attach), DEVMETHOD(device_detach, fdc_detach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), /* Bus interface */ DEVMETHOD(bus_print_child, fdc_print_child), DEVMETHOD(bus_read_ivar, fdc_read_ivar), /* Our children never use any other bus interface methods. */ { 0, 0 } }; static driver_t fdc_driver = { "fdc", fdc_methods, sizeof(struct fdc_data) }; DRIVER_MODULE(fdc, isa, fdc_driver, fdc_devclass, 0, 0); DRIVER_MODULE(fdc, acpi, fdc_driver, fdc_devclass, 0, 0); #if NCARD > 0 static device_method_t fdc_pccard_methods[] = { /* Device interface */ DEVMETHOD(device_probe, fdc_pccard_probe), DEVMETHOD(device_attach, fdc_attach), DEVMETHOD(device_detach, fdc_detach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), /* Bus interface */ DEVMETHOD(bus_print_child, fdc_print_child), DEVMETHOD(bus_read_ivar, fdc_read_ivar), /* Our children never use any other bus interface methods. */ { 0, 0 } }; static driver_t fdc_pccard_driver = { "fdc", fdc_pccard_methods, sizeof(struct fdc_data) }; DRIVER_MODULE(fdc, pccard, fdc_pccard_driver, fdc_devclass, 0, 0); #endif /* NCARD > 0 */ #ifdef GONE_IN_5 /* * Create a clone device upon request by devfs. */ static void fd_clone(void *arg, char *name, int namelen, dev_t *dev) { struct fd_data *fd; int i, u; char *n; size_t l; fd = (struct fd_data *)arg; if (*dev != NODEV) return; if (dev_stdclone(name, &n, "fd", &u) != 2) return; if (u != fd->fdu) /* unit # mismatch */ return; l = strlen(n); if (l == 1 && *n >= 'a' && *n <= 'h') { /* * Trailing letters a through h denote * pseudo-partitions. We don't support true * (UFS-style) partitions, so we just implement them * as symlinks if someone asks us nicely. */ *dev = make_dev_alias(fd->masterdev, name); return; } if (l >= 2 && l <= 5 && *n == '.') { /* * Trailing numbers, preceded by a dot, denote * subdevices for different densities. Historically, * they have been named by density (like fd0.1440), * but we allow arbitrary numbers between 1 and 4 * digits, so fd0.1 through fd0.15 are possible as * well. */ for (i = 1; i < l; i++) if (n[i] < '0' || n[i] > '9') return; for (i = 0; i < NUMDENS - 1; i++) if (fd->clonedevs[i] == NODEV) { *dev = make_dev(&fd_cdevsw, FDNUMTOUNIT(u) + i + 1, UID_ROOT, GID_OPERATOR, 0640, name); fd->clonedevs[i] = *dev; return; } } } #endif /* * Configuration/initialization, per drive. */ static int fd_probe(device_t dev) { int i; u_int st0, st3; struct fd_data *fd; struct fdc_data *fdc; fdsu_t fdsu; int flags; fdsu = *(int *)device_get_ivars(dev); /* xxx cheat a bit... */ fd = device_get_softc(dev); fdc = device_get_softc(device_get_parent(dev)); flags = device_get_flags(dev); bzero(fd, sizeof *fd); fd->dev = dev; fd->fdc = fdc; fd->fdsu = fdsu; fd->fdu = device_get_unit(dev); fd->flags = FD_UA; /* make sure fdautoselect() will be called */ fd->type = FD_DTYPE(flags); /* * XXX I think using __i386__ is wrong here since we actually want to probe * for the machine type, not the CPU type (so non-PC arch's like the PC98 will * fail the probe). However, for whatever reason, testing for _MACHINE_ARCH * == i386 breaks the test on FreeBSD/Alpha. */ #ifdef __i386__ if (fd->type == FDT_NONE && (fd->fdu == 0 || fd->fdu == 1)) { /* Look up what the BIOS thinks we have. */ if (fd->fdu == 0) { if ((fdc->flags & FDC_ISPCMCIA)) /* * Somewhat special. No need to force the * user to set device flags, since the Y-E * Data PCMCIA floppy is always a 1.44 MB * device. */ fd->type = FDT_144M; else fd->type = (rtcin(RTC_FDISKETTE) & 0xf0) >> 4; } else { fd->type = rtcin(RTC_FDISKETTE) & 0x0f; } if (fd->type == FDT_288M_1) fd->type = FDT_288M; } #endif /* __i386__ */ /* is there a unit? */ if (fd->type == FDT_NONE) return (ENXIO); /* select it */ set_motor(fdc, fdsu, TURNON); fdc_reset(fdc); /* XXX reset, then unreset, etc. */ DELAY(1000000); /* 1 sec */ /* XXX This doesn't work before the first set_motor() */ if ((fdc->flags & FDC_HAS_FIFO) == 0 && fdc->fdct == FDC_ENHANCED && (device_get_flags(fdc->fdc_dev) & FDC_NO_FIFO) == 0 && enable_fifo(fdc) == 0) { device_printf(device_get_parent(dev), "FIFO enabled, %d bytes threshold\n", fifo_threshold); } if ((flags & FD_NO_PROBE) == 0) { /* If we're at track 0 first seek inwards. */ if ((fd_sense_drive_status(fdc, &st3) == 0) && (st3 & NE7_ST3_T0)) { /* Seek some steps... */ if (fd_cmd(fdc, 3, NE7CMD_SEEK, fdsu, 10, 0) == 0) { /* ...wait a moment... */ DELAY(300000); /* make ctrlr happy: */ fd_sense_int(fdc, 0, 0); } } for (i = 0; i < 2; i++) { /* * we must recalibrate twice, just in case the * heads have been beyond cylinder 76, since * most FDCs still barf when attempting to * recalibrate more than 77 steps */ /* go back to 0: */ if (fd_cmd(fdc, 2, NE7CMD_RECAL, fdsu, 0) == 0) { /* a second being enough for full stroke seek*/ DELAY(i == 0 ? 1000000 : 300000); /* anything responding? */ if (fd_sense_int(fdc, &st0, 0) == 0 && (st0 & NE7_ST0_EC) == 0) break; /* already probed succesfully */ } } } set_motor(fdc, fdsu, TURNOFF); if ((flags & FD_NO_PROBE) == 0 && (st0 & NE7_ST0_EC) != 0) /* no track 0 -> no drive present */ return (ENXIO); switch (fd->type) { case FDT_12M: device_set_desc(dev, "1200-KB 5.25\" drive"); fd->type = FDT_12M; break; case FDT_144M: device_set_desc(dev, "1440-KB 3.5\" drive"); fd->type = FDT_144M; break; case FDT_288M: device_set_desc(dev, "2880-KB 3.5\" drive (in 1440-KB mode)"); fd->type = FDT_288M; break; case FDT_360K: device_set_desc(dev, "360-KB 5.25\" drive"); fd->type = FDT_360K; break; case FDT_720K: device_set_desc(dev, "720-KB 3.5\" drive"); fd->type = FDT_720K; break; default: return (ENXIO); } fd->track = FD_NO_TRACK; fd->fdc = fdc; fd->fdsu = fdsu; fd->options = 0; callout_handle_init(&fd->toffhandle); callout_handle_init(&fd->tohandle); /* initialize densities for subdevices */ for (i = 0; i < NUMDENS; i++) memcpy(fd->fts + i, fd_native_types + fd->type, sizeof(struct fd_type)); return (0); } static int fd_attach(device_t dev) { struct fd_data *fd; fd = device_get_softc(dev); #ifdef GONE_IN_5 fd->clonetag = EVENTHANDLER_REGISTER(dev_clone, fd_clone, fd, 1000); #endif fd->masterdev = make_dev(&fd_cdevsw, fd->fdu << 6, UID_ROOT, GID_OPERATOR, 0640, "fd%d", fd->fdu); #ifdef GONE_IN_5 { int i; for (i = 0; i < NUMDENS - 1; i++) fd->clonedevs[i] = NODEV; } #endif fd->device_stats = devstat_new_entry(device_get_name(dev), device_get_unit(dev), 0, DEVSTAT_NO_ORDERED_TAGS, DEVSTAT_TYPE_FLOPPY | DEVSTAT_TYPE_IF_OTHER, DEVSTAT_PRIORITY_FD); return (0); } static int fd_detach(device_t dev) { struct fd_data *fd; fd = device_get_softc(dev); untimeout(fd_turnoff, fd, fd->toffhandle); devstat_remove_entry(fd->device_stats); destroy_dev(fd->masterdev); #ifdef GONE_IN_5 { int i; for (i = 0; i < NUMDENS - 1; i++) if (fd->clonedevs[i] != NODEV) destroy_dev(fd->clonedevs[i]); EVENTHANDLER_DEREGISTER(dev_clone, fd->clonetag); } #endif return (0); } static device_method_t fd_methods[] = { /* Device interface */ DEVMETHOD(device_probe, fd_probe), DEVMETHOD(device_attach, fd_attach), DEVMETHOD(device_detach, fd_detach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), /* XXX */ DEVMETHOD(device_resume, bus_generic_resume), /* XXX */ { 0, 0 } }; static driver_t fd_driver = { "fd", fd_methods, sizeof(struct fd_data) }; DRIVER_MODULE(fd, fdc, fd_driver, fd_devclass, 0, 0); /* * More auxiliary functions. */ /* * Motor control stuff. * Remember to not deselect the drive we're working on. */ static void set_motor(struct fdc_data *fdc, int fdsu, int turnon) { int fdout; fdout = fdc->fdout; if (turnon) { fdout &= ~FDO_FDSEL; fdout |= (FDO_MOEN0 << fdsu) | FDO_FDMAEN | FDO_FRST | fdsu; } else fdout &= ~(FDO_MOEN0 << fdsu); fdc->fdout = fdout; fdout_wr(fdc, fdout); TRACE1("[0x%x->FDOUT]", fdout); } static void fd_turnoff(void *xfd) { int s; fd_p fd = xfd; TRACE1("[fd%d: turnoff]", fd->fdu); s = splbio(); /* * Don't turn off the motor yet if the drive is active. * * If we got here, this could only mean we missed an interrupt. * This can e. g. happen on the Y-E Date PCMCIA floppy controller * after a controller reset. Just schedule a pseudo-interrupt * so the state machine gets re-entered. */ if (fd->fdc->state != DEVIDLE && fd->fdc->fdu == fd->fdu) { fdc_intr(fd->fdc); splx(s); return; } fd->flags &= ~FD_MOTOR; set_motor(fd->fdc, fd->fdsu, TURNOFF); splx(s); } static void fd_motor_on(void *xfd) { int s; fd_p fd = xfd; s = splbio(); fd->flags &= ~FD_MOTOR_WAIT; if((fd->fdc->fd == fd) && (fd->fdc->state == MOTORWAIT)) { fdc_intr(fd->fdc); } splx(s); } static void fd_turnon(fd_p fd) { if(!(fd->flags & FD_MOTOR)) { fd->flags |= (FD_MOTOR + FD_MOTOR_WAIT); set_motor(fd->fdc, fd->fdsu, TURNON); timeout(fd_motor_on, fd, hz); /* in 1 sec its ok */ } } static void fdc_reset(fdc_p fdc) { /* Try a reset, keep motor on */ fdout_wr(fdc, fdc->fdout & ~(FDO_FRST|FDO_FDMAEN)); TRACE1("[0x%x->FDOUT]", fdc->fdout & ~(FDO_FRST|FDO_FDMAEN)); DELAY(100); /* enable FDC, but defer interrupts a moment */ fdout_wr(fdc, fdc->fdout & ~FDO_FDMAEN); TRACE1("[0x%x->FDOUT]", fdc->fdout & ~FDO_FDMAEN); DELAY(100); fdout_wr(fdc, fdc->fdout); TRACE1("[0x%x->FDOUT]", fdc->fdout); /* XXX after a reset, silently believe the FDC will accept commands */ (void)fd_cmd(fdc, 3, NE7CMD_SPECIFY, NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0), 0); if (fdc->flags & FDC_HAS_FIFO) (void) enable_fifo(fdc); } /* * FDC IO functions, take care of the main status register, timeout * in case the desired status bits are never set. * * These PIO loops initially start out with short delays between * each iteration in the expectation that the required condition * is usually met quickly, so it can be handled immediately. After * about 1 ms, stepping is increased to achieve a better timing * accuracy in the calls to DELAY(). */ static int fd_in(struct fdc_data *fdc, int *ptr) { int i, j, step; for (j = 0, step = 1; (i = fdsts_rd(fdc) & (NE7_DIO|NE7_RQM)) != (NE7_DIO|NE7_RQM) && j < FDSTS_TIMEOUT; j += step) { if (i == NE7_RQM) return (fdc_err(fdc, "ready for output in input\n")); if (j == 1000) step = 1000; DELAY(step); } if (j >= FDSTS_TIMEOUT) return (fdc_err(fdc, bootverbose? "input ready timeout\n": 0)); #ifdef FDC_DEBUG i = fddata_rd(fdc); TRACE1("[FDDATA->0x%x]", (unsigned char)i); *ptr = i; return (0); #else /* !FDC_DEBUG */ i = fddata_rd(fdc); if (ptr) *ptr = i; return (0); #endif /* FDC_DEBUG */ } static int out_fdc(struct fdc_data *fdc, int x) { int i, j, step; for (j = 0, step = 1; (i = fdsts_rd(fdc) & (NE7_DIO|NE7_RQM)) != NE7_RQM && j < FDSTS_TIMEOUT; j += step) { if (i == (NE7_DIO|NE7_RQM)) return (fdc_err(fdc, "ready for input in output\n")); if (j == 1000) step = 1000; DELAY(step); } if (j >= FDSTS_TIMEOUT) return (fdc_err(fdc, bootverbose? "output ready timeout\n": 0)); /* Send the command and return */ fddata_wr(fdc, x); TRACE1("[0x%x->FDDATA]", x); return (0); } /* * Block device driver interface functions (interspersed with even more * auxiliary functions). */ static int Fdopen(dev_t dev, int flags, int mode, struct thread *td) { fdu_t fdu = FDUNIT(minor(dev)); int type = FDTYPE(minor(dev)); fd_p fd; fdc_p fdc; int rv, unitattn, dflags; if ((fd = devclass_get_softc(fd_devclass, fdu)) == 0) return (ENXIO); fdc = fd->fdc; if ((fdc == NULL) || (fd->type == FDT_NONE)) return (ENXIO); if (type > NUMDENS) return (ENXIO); dflags = device_get_flags(fd->dev); /* * This is a bit bogus. It's still possible that e. g. a * descriptor gets inherited to a child, but then it's at * least for the same subdevice. By checking FD_OPEN here, we * can ensure that a device isn't attempted to be opened with * different densities at the same time where the second open * could clobber the settings from the first one. */ if (fd->flags & FD_OPEN) return (EBUSY); if (type == 0) { if (flags & FNONBLOCK) { /* * Unfortunately, physio(9) discards its ioflag * argument, thus preventing us from seeing the * IO_NDELAY bit. So we need to keep track * ourselves. */ fd->flags |= FD_NONBLOCK; fd->ft = 0; } else { /* * Figure out a unit attention condition. * * If UA has been forced, proceed. * * If the drive has no changeline support, * or if the drive parameters have been lost * due to previous non-blocking access, * assume a forced UA condition. * * If motor is off, turn it on for a moment * and select our drive, in order to read the * UA hardware signal. * * If motor is on, and our drive is currently * selected, just read the hardware bit. * * If motor is on, but active for another * drive on that controller, we are lost. We * cannot risk to deselect the other drive, so * we just assume a forced UA condition to be * on the safe side. */ unitattn = 0; if ((dflags & FD_NO_CHLINE) != 0 || (fd->flags & FD_UA) != 0 || fd->ft == 0) { unitattn = 1; fd->flags &= ~FD_UA; } else if (fdc->fdout & (FDO_MOEN0 | FDO_MOEN1 | FDO_MOEN2 | FDO_MOEN3)) { if ((fdc->fdout & FDO_FDSEL) == fd->fdsu) unitattn = fdin_rd(fdc) & FDI_DCHG; else unitattn = 1; } else { set_motor(fdc, fd->fdsu, TURNON); unitattn = fdin_rd(fdc) & FDI_DCHG; set_motor(fdc, fd->fdsu, TURNOFF); } if (unitattn && (rv = fdautoselect(dev)) != 0) return (rv); } } else { fd->ft = fd->fts + type; } fd->flags |= FD_OPEN; /* * Clearing the DMA overrun counter at open time is a bit messy. * Since we're only managing one counter per controller, opening * the second drive could mess it up. Anyway, if the DMA overrun * condition is really persistent, it will eventually time out * still. OTOH, clearing it here will ensure we'll at least start * trying again after a previous (maybe even long ago) failure. * Also, this is merely a stop-gap measure only that should not * happen during normal operation, so we can tolerate it to be a * bit sloppy about this. */ fdc->dma_overruns = 0; return 0; } static int fdclose(dev_t dev, int flags, int mode, struct thread *td) { fdu_t fdu = FDUNIT(minor(dev)); struct fd_data *fd; fd = devclass_get_softc(fd_devclass, fdu); fd->flags &= ~(FD_OPEN | FD_NONBLOCK); fd->options &= ~(FDOPT_NORETRY | FDOPT_NOERRLOG | FDOPT_NOERROR); return (0); } static void fdstrategy(struct bio *bp) { long blknum, nblocks; int s; fdu_t fdu; fdc_p fdc; fd_p fd; size_t fdblk; fdu = FDUNIT(minor(bp->bio_dev)); fd = devclass_get_softc(fd_devclass, fdu); if (fd == 0) panic("fdstrategy: buf for nonexistent device (%#lx, %#lx)", (u_long)major(bp->bio_dev), (u_long)minor(bp->bio_dev)); fdc = fd->fdc; bp->bio_resid = bp->bio_bcount; if (fd->type == FDT_NONE || fd->ft == 0) { if (fd->type != FDT_NONE && (fd->flags & FD_NONBLOCK)) bp->bio_error = EAGAIN; else bp->bio_error = ENXIO; bp->bio_flags |= BIO_ERROR; goto bad; } fdblk = 128 << (fd->ft->secsize); if (bp->bio_cmd != FDBIO_FORMAT && bp->bio_cmd != FDBIO_RDSECTID) { if (fd->flags & FD_NONBLOCK) { bp->bio_error = EAGAIN; bp->bio_flags |= BIO_ERROR; goto bad; } if (bp->bio_blkno < 0) { printf( "fd%d: fdstrat: bad request blkno = %lu, bcount = %ld\n", fdu, (u_long)bp->bio_blkno, bp->bio_bcount); bp->bio_error = EINVAL; bp->bio_flags |= BIO_ERROR; goto bad; } if ((bp->bio_bcount % fdblk) != 0) { bp->bio_error = EINVAL; bp->bio_flags |= BIO_ERROR; goto bad; } } /* * Set up block calculations. */ if (bp->bio_blkno > 20000000) { /* * Reject unreasonably high block number, prevent the * multiplication below from overflowing. */ bp->bio_error = EINVAL; bp->bio_flags |= BIO_ERROR; goto bad; } blknum = bp->bio_blkno * DEV_BSIZE / fdblk; nblocks = fd->ft->size; if (blknum + bp->bio_bcount / fdblk > nblocks) { if (blknum >= nblocks) { if (bp->bio_cmd != BIO_READ) { bp->bio_error = ENOSPC; bp->bio_flags |= BIO_ERROR; } goto bad; /* not always bad, but EOF */ } bp->bio_bcount = (nblocks - blknum) * fdblk; } bp->bio_pblkno = blknum; s = splbio(); bioq_disksort(&fdc->head, bp); untimeout(fd_turnoff, fd, fd->toffhandle); /* a good idea */ devstat_start_transaction_bio(fd->device_stats, bp); device_busy(fd->dev); fdstart(fdc); splx(s); return; bad: biodone(bp); } /* * fdstart * * We have just queued something. If the controller is not busy * then simulate the case where it has just finished a command * So that it (the interrupt routine) looks on the queue for more * work to do and picks up what we just added. * * If the controller is already busy, we need do nothing, as it * will pick up our work when the present work completes. */ static void fdstart(struct fdc_data *fdc) { int s; s = splbio(); if(fdc->state == DEVIDLE) { fdc_intr(fdc); } splx(s); } static void fd_iotimeout(void *xfdc) { fdc_p fdc; int s; fdc = xfdc; TRACE1("fd%d[fd_iotimeout()]", fdc->fdu); /* * Due to IBM's brain-dead design, the FDC has a faked ready * signal, hardwired to ready == true. Thus, any command * issued if there's no diskette in the drive will _never_ * complete, and must be aborted by resetting the FDC. * Many thanks, Big Blue! * The FDC must not be reset directly, since that would * interfere with the state machine. Instead, pretend that * the command completed but was invalid. The state machine * will reset the FDC and retry once. */ s = splbio(); fdc->status[0] = NE7_ST0_IC_IV; fdc->flags &= ~FDC_STAT_VALID; fdc->state = IOTIMEDOUT; fdc_intr(fdc); splx(s); } /* Just ensure it has the right spl. */ static void fd_pseudointr(void *xfdc) { int s; s = splbio(); fdc_intr(xfdc); splx(s); } /* * fdc_intr * * Keep calling the state machine until it returns a 0. * Always called at splbio. */ static void fdc_intr(void *xfdc) { fdc_p fdc = xfdc; while(fdstate(fdc)) ; } /* * Magic pseudo-DMA initialization for YE FDC. Sets count and * direction. */ #define SET_BCDR(fdc,wr,cnt,port) \ bus_space_write_1(fdc->portt, fdc->porth, fdc->port_off + port, \ ((cnt)-1) & 0xff); \ bus_space_write_1(fdc->portt, fdc->porth, fdc->port_off + port + 1, \ ((wr ? 0x80 : 0) | ((((cnt)-1) >> 8) & 0x7f))); /* * fdcpio(): perform programmed IO read/write for YE PCMCIA floppy. */ static int fdcpio(fdc_p fdc, long flags, caddr_t addr, u_int count) { u_char *cptr = (u_char *)addr; if (flags == BIO_READ) { if (fdc->state != PIOREAD) { fdc->state = PIOREAD; return(0); } SET_BCDR(fdc, 0, count, 0); bus_space_read_multi_1(fdc->portt, fdc->porth, fdc->port_off + FDC_YE_DATAPORT, cptr, count); } else { bus_space_write_multi_1(fdc->portt, fdc->porth, fdc->port_off + FDC_YE_DATAPORT, cptr, count); SET_BCDR(fdc, 0, count, 0); } return(1); } /* * Try figuring out the density of the media present in our device. */ static int fdautoselect(dev_t dev) { fdu_t fdu; fd_p fd; struct fd_type *fdtp; struct fdc_readid id; int i, n, oopts, rv; fdu = FDUNIT(minor(dev)); fd = devclass_get_softc(fd_devclass, fdu); switch (fd->type) { default: return (ENXIO); case FDT_360K: case FDT_720K: /* no autoselection on those drives */ fd->ft = fd_native_types + fd->type; return (0); case FDT_12M: fdtp = fd_searchlist_12m; n = sizeof fd_searchlist_12m / sizeof(struct fd_type); break; case FDT_144M: fdtp = fd_searchlist_144m; n = sizeof fd_searchlist_144m / sizeof(struct fd_type); break; case FDT_288M: fdtp = fd_searchlist_288m; n = sizeof fd_searchlist_288m / sizeof(struct fd_type); break; } /* * Try reading sector ID fields, first at cylinder 0, head 0, * then at cylinder 2, head N. We don't probe cylinder 1, * since for 5.25in DD media in a HD drive, there are no data * to read (2 step pulses per media cylinder required). For * two-sided media, the second probe always goes to head 1, so * we can tell them apart from single-sided media. As a * side-effect this means that single-sided media should be * mentioned in the search list after two-sided media of an * otherwise identical density. Media with a different number * of sectors per track but otherwise identical parameters * cannot be distinguished at all. * * If we successfully read an ID field on both cylinders where * the recorded values match our expectation, we are done. * Otherwise, we try the next density entry from the table. * * Stepping to cylinder 2 has the side-effect of clearing the * unit attention bit. */ oopts = fd->options; fd->options |= FDOPT_NOERRLOG | FDOPT_NORETRY; for (i = 0; i < n; i++, fdtp++) { fd->ft = fdtp; id.cyl = id.head = 0; rv = fdmisccmd(dev, FDBIO_RDSECTID, &id); if (rv != 0) continue; if (id.cyl != 0 || id.head != 0 || id.secshift != fdtp->secsize) continue; id.cyl = 2; id.head = fd->ft->heads - 1; rv = fdmisccmd(dev, FDBIO_RDSECTID, &id); if (id.cyl != 2 || id.head != fdtp->heads - 1 || id.secshift != fdtp->secsize) continue; if (rv == 0) break; } fd->options = oopts; if (i == n) { if (bootverbose) device_printf(fd->dev, "autoselection failed\n"); fd->ft = 0; return (EIO); } else { if (bootverbose) device_printf(fd->dev, "autoselected %d KB medium\n", fd->ft->size / 2); return (0); } } /* * The controller state machine. * * If it returns a non zero value, it should be called again immediately. */ static int fdstate(fdc_p fdc) { struct fdc_readid *idp; int read, format, rdsectid, cylinder, head, i, sec = 0, sectrac; int st0, cyl, st3, idf, ne7cmd, mfm, steptrac; unsigned long blknum; fdu_t fdu = fdc->fdu; fd_p fd; register struct bio *bp; struct fd_formb *finfo = NULL; size_t fdblk; bp = fdc->bp; if (bp == NULL) { bp = bioq_first(&fdc->head); if (bp != NULL) { bioq_remove(&fdc->head, bp); fdc->bp = bp; } } if (bp == NULL) { /* * Nothing left for this controller to do, * force into the IDLE state. */ fdc->state = DEVIDLE; if (fdc->fd) { device_printf(fdc->fdc_dev, "unexpected valid fd pointer\n"); fdc->fd = (fd_p) 0; fdc->fdu = -1; } TRACE1("[fdc%d IDLE]", fdc->fdcu); return (0); } fdu = FDUNIT(minor(bp->bio_dev)); fd = devclass_get_softc(fd_devclass, fdu); fdblk = 128 << fd->ft->secsize; if (fdc->fd && (fd != fdc->fd)) device_printf(fd->dev, "confused fd pointers\n"); read = bp->bio_cmd == BIO_READ; mfm = (fd->ft->flags & FL_MFM)? NE7CMD_MFM: 0; steptrac = (fd->ft->flags & FL_2STEP)? 2: 1; if (read) idf = ISADMA_READ; else idf = ISADMA_WRITE; format = bp->bio_cmd == FDBIO_FORMAT; rdsectid = bp->bio_cmd == FDBIO_RDSECTID; if (format) finfo = (struct fd_formb *)bp->bio_data; TRACE1("fd%d", fdu); TRACE1("[%s]", fdstates[fdc->state]); TRACE1("(0x%x)", fd->flags); untimeout(fd_turnoff, fd, fd->toffhandle); fd->toffhandle = timeout(fd_turnoff, fd, 4 * hz); switch (fdc->state) { case DEVIDLE: case FINDWORK: /* we have found new work */ fdc->retry = 0; fd->skip = 0; fdc->fd = fd; fdc->fdu = fdu; fdc->fdctl_wr(fdc, fd->ft->trans); TRACE1("[0x%x->FDCTL]", fd->ft->trans); /* * If the next drive has a motor startup pending, then * it will start up in its own good time. */ if(fd->flags & FD_MOTOR_WAIT) { fdc->state = MOTORWAIT; return (0); /* will return later */ } /* * Maybe if it's not starting, it SHOULD be starting. */ if (!(fd->flags & FD_MOTOR)) { fdc->state = MOTORWAIT; fd_turnon(fd); return (0); /* will return later */ } else /* at least make sure we are selected */ { set_motor(fdc, fd->fdsu, TURNON); } if (fdc->flags & FDC_NEEDS_RESET) { fdc->state = RESETCTLR; fdc->flags &= ~FDC_NEEDS_RESET; } else fdc->state = DOSEEK; return (1); /* will return immediately */ case DOSEEK: blknum = bp->bio_pblkno + fd->skip / fdblk; cylinder = blknum / (fd->ft->sectrac * fd->ft->heads); if (cylinder == fd->track) { fdc->state = SEEKCOMPLETE; return (1); /* will return immediately */ } if (fd_cmd(fdc, 3, NE7CMD_SEEK, fd->fdsu, cylinder * steptrac, 0)) { /* * Seek command not accepted, looks like * the FDC went off to the Saints... */ fdc->retry = 6; /* try a reset */ return(retrier(fdc)); } fd->track = FD_NO_TRACK; fdc->state = SEEKWAIT; return(0); /* will return later */ case SEEKWAIT: /* allow heads to settle */ timeout(fd_pseudointr, fdc, hz / 16); fdc->state = SEEKCOMPLETE; return(0); /* will return later */ case SEEKCOMPLETE : /* seek done, start DMA */ blknum = bp->bio_pblkno + fd->skip / fdblk; cylinder = blknum / (fd->ft->sectrac * fd->ft->heads); /* Make sure seek really happened. */ if(fd->track == FD_NO_TRACK) { int descyl = cylinder * steptrac; do { /* * This might be a "ready changed" interrupt, * which cannot really happen since the * RDY pin is hardwired to + 5 volts. This * generally indicates a "bouncing" intr * line, so do one of the following: * * When running on an enhanced FDC that is * known to not go stuck after responding * with INVALID, fetch all interrupt states * until seeing either an INVALID or a * real interrupt condition. * * When running on a dumb old NE765, give * up immediately. The controller will * provide up to four dummy RC interrupt * conditions right after reset (for the * corresponding four drives), so this is * our only chance to get notice that it * was not the FDC that caused the interrupt. */ if (fd_sense_int(fdc, &st0, &cyl) == FD_NOT_VALID) return (0); /* will return later */ if(fdc->fdct == FDC_NE765 && (st0 & NE7_ST0_IC) == NE7_ST0_IC_RC) return (0); /* hope for a real intr */ } while ((st0 & NE7_ST0_IC) == NE7_ST0_IC_RC); if (0 == descyl) { int failed = 0; /* * seek to cyl 0 requested; make sure we are * really there */ if (fd_sense_drive_status(fdc, &st3)) failed = 1; if ((st3 & NE7_ST3_T0) == 0) { printf( "fd%d: Seek to cyl 0, but not really there (ST3 = %b)\n", fdu, st3, NE7_ST3BITS); failed = 1; } if (failed) { if(fdc->retry < 3) fdc->retry = 3; return (retrier(fdc)); } } if (cyl != descyl) { printf( "fd%d: Seek to cyl %d failed; am at cyl %d (ST0 = 0x%x)\n", fdu, descyl, cyl, st0); if (fdc->retry < 3) fdc->retry = 3; return (retrier(fdc)); } } fd->track = cylinder; if (format) fd->skip = (char *)&(finfo->fd_formb_cylno(0)) - (char *)finfo; if (!rdsectid && !(fdc->flags & FDC_NODMA)) isa_dmastart(idf, bp->bio_data+fd->skip, format ? bp->bio_bcount : fdblk, fdc->dmachan); blknum = bp->bio_pblkno + fd->skip / fdblk; sectrac = fd->ft->sectrac; sec = blknum % (sectrac * fd->ft->heads); head = sec / sectrac; sec = sec % sectrac + 1; if (head != 0 && fd->ft->offset_side2 != 0) sec += fd->ft->offset_side2; fd->hddrv = ((head&1)<<2)+fdu; if(format || !(read || rdsectid)) { /* make sure the drive is writable */ if(fd_sense_drive_status(fdc, &st3) != 0) { /* stuck controller? */ if (!(fdc->flags & FDC_NODMA)) isa_dmadone(idf, bp->bio_data + fd->skip, format ? bp->bio_bcount : fdblk, fdc->dmachan); fdc->retry = 6; /* reset the beast */ return (retrier(fdc)); } if(st3 & NE7_ST3_WP) { /* * XXX YES! this is ugly. * in order to force the current operation * to fail, we will have to fake an FDC * error - all error handling is done * by the retrier() */ fdc->status[0] = NE7_ST0_IC_AT; fdc->status[1] = NE7_ST1_NW; fdc->status[2] = 0; fdc->status[3] = fd->track; fdc->status[4] = head; fdc->status[5] = sec; fdc->retry = 8; /* break out immediately */ fdc->state = IOTIMEDOUT; /* not really... */ return (1); /* will return immediately */ } } if (format) { ne7cmd = NE7CMD_FORMAT | mfm; if (fdc->flags & FDC_NODMA) { /* * This seems to be necessary for * whatever obscure reason; if we omit * it, we end up filling the sector ID * fields of the newly formatted track * entirely with garbage, causing * `wrong cylinder' errors all over * the place when trying to read them * back. * * Umpf. */ SET_BCDR(fdc, 1, bp->bio_bcount, 0); (void)fdcpio(fdc,bp->bio_cmd, bp->bio_data+fd->skip, bp->bio_bcount); } /* formatting */ if(fd_cmd(fdc, 6, ne7cmd, head << 2 | fdu, finfo->fd_formb_secshift, finfo->fd_formb_nsecs, finfo->fd_formb_gaplen, finfo->fd_formb_fillbyte, 0)) { /* controller fell over */ if (!(fdc->flags & FDC_NODMA)) isa_dmadone(idf, bp->bio_data + fd->skip, format ? bp->bio_bcount : fdblk, fdc->dmachan); fdc->retry = 6; return (retrier(fdc)); } } else if (rdsectid) { ne7cmd = NE7CMD_READID | mfm; if (fd_cmd(fdc, 2, ne7cmd, head << 2 | fdu, 0)) { /* controller jamming */ fdc->retry = 6; return (retrier(fdc)); } } else { /* read or write operation */ ne7cmd = (read ? NE7CMD_READ | NE7CMD_SK : NE7CMD_WRITE) | mfm; if (fdc->flags & FDC_NODMA) { /* * This seems to be necessary even when * reading data. */ SET_BCDR(fdc, 1, fdblk, 0); /* * Perform the write pseudo-DMA before * the WRITE command is sent. */ if (!read) (void)fdcpio(fdc,bp->bio_cmd, bp->bio_data+fd->skip, fdblk); } if (fd_cmd(fdc, 9, ne7cmd, head << 2 | fdu, /* head & unit */ fd->track, /* track */ head, sec, /* sector + 1 */ fd->ft->secsize, /* sector size */ sectrac, /* sectors/track */ fd->ft->gap, /* gap size */ fd->ft->datalen, /* data length */ 0)) { /* the beast is sleeping again */ if (!(fdc->flags & FDC_NODMA)) isa_dmadone(idf, bp->bio_data + fd->skip, format ? bp->bio_bcount : fdblk, fdc->dmachan); fdc->retry = 6; return (retrier(fdc)); } } if (!rdsectid && (fdc->flags & FDC_NODMA)) /* * If this is a read, then simply await interrupt * before performing PIO. */ if (read && !fdcpio(fdc,bp->bio_cmd, bp->bio_data+fd->skip,fdblk)) { fd->tohandle = timeout(fd_iotimeout, fdc, hz); return(0); /* will return later */ } /* * Write (or format) operation will fall through and * await completion interrupt. */ fdc->state = IOCOMPLETE; fd->tohandle = timeout(fd_iotimeout, fdc, hz); return (0); /* will return later */ case PIOREAD: /* * Actually perform the PIO read. The IOCOMPLETE case * removes the timeout for us. */ (void)fdcpio(fdc,bp->bio_cmd,bp->bio_data+fd->skip,fdblk); fdc->state = IOCOMPLETE; /* FALLTHROUGH */ case IOCOMPLETE: /* IO done, post-analyze */ untimeout(fd_iotimeout, fdc, fd->tohandle); if (fd_read_status(fdc)) { if (!rdsectid && !(fdc->flags & FDC_NODMA)) isa_dmadone(idf, bp->bio_data + fd->skip, format ? bp->bio_bcount : fdblk, fdc->dmachan); if (fdc->retry < 6) fdc->retry = 6; /* force a reset */ return (retrier(fdc)); } fdc->state = IOTIMEDOUT; /* FALLTHROUGH */ case IOTIMEDOUT: if (!rdsectid && !(fdc->flags & FDC_NODMA)) isa_dmadone(idf, bp->bio_data + fd->skip, format ? bp->bio_bcount : fdblk, fdc->dmachan); if (fdc->status[0] & NE7_ST0_IC) { if ((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_AT && fdc->status[1] & NE7_ST1_OR) { /* * DMA overrun. Someone hogged the bus and * didn't release it in time for the next * FDC transfer. * * We normally restart this without bumping * the retry counter. However, in case * something is seriously messed up (like * broken hardware), we rather limit the * number of retries so the IO operation * doesn't block indefinately. */ if (fdc->dma_overruns++ < FDC_DMAOV_MAX) { fdc->state = SEEKCOMPLETE; return (1);/* will return immediately */ } /* else fall through */ } if((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_IV && fdc->retry < 6) fdc->retry = 6; /* force a reset */ else if((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_AT && fdc->status[2] & NE7_ST2_WC && fdc->retry < 3) fdc->retry = 3; /* force recalibrate */ return (retrier(fdc)); } /* All OK */ if (rdsectid) { /* copy out ID field contents */ idp = (struct fdc_readid *)bp->bio_data; idp->cyl = fdc->status[3]; idp->head = fdc->status[4]; idp->sec = fdc->status[5]; idp->secshift = fdc->status[6]; } /* Operation successful, retry DMA overruns again next time. */ fdc->dma_overruns = 0; fd->skip += fdblk; if (!rdsectid && !format && fd->skip < bp->bio_bcount) { /* set up next transfer */ fdc->state = DOSEEK; } else { /* ALL DONE */ fd->skip = 0; bp->bio_resid = 0; fdc->bp = NULL; device_unbusy(fd->dev); biofinish(bp, fd->device_stats, 0); fdc->fd = (fd_p) 0; fdc->fdu = -1; fdc->state = FINDWORK; } return (1); /* will return immediately */ case RESETCTLR: fdc_reset(fdc); fdc->retry++; fdc->state = RESETCOMPLETE; return (0); /* will return later */ case RESETCOMPLETE: /* * Discard all the results from the reset so that they * can't cause an unexpected interrupt later. */ for (i = 0; i < 4; i++) (void)fd_sense_int(fdc, &st0, &cyl); fdc->state = STARTRECAL; /* FALLTHROUGH */ case STARTRECAL: if(fd_cmd(fdc, 2, NE7CMD_RECAL, fdu, 0)) { /* arrgl */ fdc->retry = 6; return (retrier(fdc)); } fdc->state = RECALWAIT; return (0); /* will return later */ case RECALWAIT: /* allow heads to settle */ timeout(fd_pseudointr, fdc, hz / 8); fdc->state = RECALCOMPLETE; return (0); /* will return later */ case RECALCOMPLETE: do { /* * See SEEKCOMPLETE for a comment on this: */ if (fd_sense_int(fdc, &st0, &cyl) == FD_NOT_VALID) return (0); /* will return later */ if(fdc->fdct == FDC_NE765 && (st0 & NE7_ST0_IC) == NE7_ST0_IC_RC) return (0); /* hope for a real intr */ } while ((st0 & NE7_ST0_IC) == NE7_ST0_IC_RC); if ((st0 & NE7_ST0_IC) != NE7_ST0_IC_NT || cyl != 0) { if(fdc->retry > 3) /* * A recalibrate from beyond cylinder 77 * will "fail" due to the FDC limitations; * since people used to complain much about * the failure message, try not logging * this one if it seems to be the first * time in a line. */ printf("fd%d: recal failed ST0 %b cyl %d\n", fdu, st0, NE7_ST0BITS, cyl); if(fdc->retry < 3) fdc->retry = 3; return (retrier(fdc)); } fd->track = 0; /* Seek (probably) necessary */ fdc->state = DOSEEK; return (1); /* will return immediately */ case MOTORWAIT: if(fd->flags & FD_MOTOR_WAIT) { return (0); /* time's not up yet */ } if (fdc->flags & FDC_NEEDS_RESET) { fdc->state = RESETCTLR; fdc->flags &= ~FDC_NEEDS_RESET; } else fdc->state = DOSEEK; return (1); /* will return immediately */ default: device_printf(fdc->fdc_dev, "unexpected FD int->"); if (fd_read_status(fdc) == 0) printf("FDC status :%x %x %x %x %x %x %x ", fdc->status[0], fdc->status[1], fdc->status[2], fdc->status[3], fdc->status[4], fdc->status[5], fdc->status[6] ); else printf("No status available "); if (fd_sense_int(fdc, &st0, &cyl) != 0) { printf("[controller is dead now]\n"); return (0); /* will return later */ } printf("ST0 = %x, PCN = %x\n", st0, cyl); return (0); /* will return later */ } /* noone should ever get here */ } static int retrier(struct fdc_data *fdc) { struct bio *bp; struct fd_data *fd; int fdu; bp = fdc->bp; /* XXX shouldn't this be cached somewhere? */ fdu = FDUNIT(minor(bp->bio_dev)); fd = devclass_get_softc(fd_devclass, fdu); if (fd->options & FDOPT_NORETRY) goto fail; switch (fdc->retry) { case 0: case 1: case 2: fdc->state = SEEKCOMPLETE; break; case 3: case 4: case 5: fdc->state = STARTRECAL; break; case 6: fdc->state = RESETCTLR; break; case 7: break; default: fail: if ((fd->options & FDOPT_NOERRLOG) == 0) { disk_err(bp, "hard error", fdc->fd->skip / DEV_BSIZE, 0); if (fdc->flags & FDC_STAT_VALID) { printf( " (ST0 %b ST1 %b ST2 %b cyl %u hd %u sec %u)\n", fdc->status[0], NE7_ST0BITS, fdc->status[1], NE7_ST1BITS, fdc->status[2], NE7_ST2BITS, fdc->status[3], fdc->status[4], fdc->status[5]); } else printf(" (No status)\n"); } if ((fd->options & FDOPT_NOERROR) == 0) { bp->bio_flags |= BIO_ERROR; bp->bio_error = EIO; bp->bio_resid = bp->bio_bcount - fdc->fd->skip; } else bp->bio_resid = 0; fdc->bp = NULL; fdc->fd->skip = 0; device_unbusy(fd->dev); biofinish(bp, fdc->fd->device_stats, 0); fdc->state = FINDWORK; fdc->flags |= FDC_NEEDS_RESET; fdc->fd = (fd_p) 0; fdc->fdu = -1; return (1); } fdc->retry++; return (1); } static void fdbiodone(struct bio *bp) { wakeup(bp); } static int fdmisccmd(dev_t dev, u_int cmd, void *data) { fdu_t fdu; fd_p fd; struct bio *bp; struct fd_formb *finfo; struct fdc_readid *idfield; size_t fdblk; int error; fdu = FDUNIT(minor(dev)); fd = devclass_get_softc(fd_devclass, fdu); fdblk = 128 << fd->ft->secsize; finfo = (struct fd_formb *)data; idfield = (struct fdc_readid *)data; bp = malloc(sizeof(struct bio), M_TEMP, M_WAITOK | M_ZERO); /* * Set up a bio request for fdstrategy(). bio_blkno is faked * so that fdstrategy() will seek to the the requested * cylinder, and use the desired head. */ bp->bio_cmd = cmd; if (cmd == FDBIO_FORMAT) { bp->bio_blkno = (finfo->cyl * (fd->ft->sectrac * fd->ft->heads) + finfo->head * fd->ft->sectrac) * fdblk / DEV_BSIZE; bp->bio_bcount = sizeof(struct fd_idfield_data) * finfo->fd_formb_nsecs; } else if (cmd == FDBIO_RDSECTID) { bp->bio_blkno = (idfield->cyl * (fd->ft->sectrac * fd->ft->heads) + idfield->head * fd->ft->sectrac) * fdblk / DEV_BSIZE; bp->bio_bcount = sizeof(struct fdc_readid); } else panic("wrong cmd in fdmisccmd()"); bp->bio_data = data; bp->bio_dev = dev; bp->bio_done = fdbiodone; bp->bio_flags = 0; /* Now run the command. */ fdstrategy(bp); error = biowait(bp, "fdcmd"); free(bp, M_TEMP); return (error); } static int fdioctl(dev_t dev, u_long cmd, caddr_t addr, int flag, struct thread *td) { fdu_t fdu; fd_p fd; struct fdc_status *fsp; struct fdc_readid *rid; int error, type; fdu = FDUNIT(minor(dev)); type = FDTYPE(minor(dev)); fd = devclass_get_softc(fd_devclass, fdu); /* * First, handle everything that could be done with * FD_NONBLOCK still being set. */ switch (cmd) { case DIOCGMEDIASIZE: if (fd->ft == 0) return ((fd->flags & FD_NONBLOCK) ? EAGAIN : ENXIO); *(off_t *)addr = (128 << (fd->ft->secsize)) * fd->ft->size; return (0); case DIOCGSECTORSIZE: if (fd->ft == 0) return ((fd->flags & FD_NONBLOCK) ? EAGAIN : ENXIO); *(u_int *)addr = 128 << (fd->ft->secsize); return (0); case FIONBIO: if (*(int *)addr != 0) fd->flags |= FD_NONBLOCK; else { if (fd->ft == 0) { /* * No drive type has been selected yet, * cannot turn FNONBLOCK off. */ return (EINVAL); } fd->flags &= ~FD_NONBLOCK; } return (0); case FIOASYNC: /* keep the generic fcntl() code happy */ return (0); case FD_GTYPE: /* get drive type */ if (fd->ft == 0) /* no type known yet, return the native type */ *(struct fd_type *)addr = fd_native_types[fd->type]; else *(struct fd_type *)addr = *fd->ft; return (0); case FD_STYPE: /* set drive type */ if (type == 0) { /* * Allow setting drive type temporarily iff * currently unset. Used for fdformat so any * user can set it, and then start formatting. */ if (fd->ft) return (EINVAL); /* already set */ fd->ft = fd->fts; *fd->ft = *(struct fd_type *)addr; fd->flags |= FD_UA; } else { /* * Set density definition permanently. Only * allow for superuser. */ if (suser(td) != 0) return (EPERM); fd->fts[type] = *(struct fd_type *)addr; } return (0); case FD_GOPTS: /* get drive options */ *(int *)addr = fd->options + (type == 0? FDOPT_AUTOSEL: 0); return (0); case FD_SOPTS: /* set drive options */ fd->options = *(int *)addr & ~FDOPT_AUTOSEL; return (0); #ifdef FDC_DEBUG case FD_DEBUG: if ((fd_debug != 0) != (*(int *)addr != 0)) { fd_debug = (*(int *)addr != 0); printf("fd%d: debugging turned %s\n", fd->fdu, fd_debug ? "on" : "off"); } return (0); #endif case FD_CLRERR: if (suser(td) != 0) return (EPERM); fd->fdc->fdc_errs = 0; return (0); case FD_GSTAT: fsp = (struct fdc_status *)addr; if ((fd->fdc->flags & FDC_STAT_VALID) == 0) return (EINVAL); memcpy(fsp->status, fd->fdc->status, 7 * sizeof(u_int)); return (0); case FD_GDTYPE: *(enum fd_drivetype *)addr = fd->type; return (0); } /* * Now handle everything else. Make sure we have a valid * drive type. */ if (fd->flags & FD_NONBLOCK) return (EAGAIN); if (fd->ft == 0) return (ENXIO); error = 0; switch (cmd) { case FD_FORM: if ((flag & FWRITE) == 0) return (EBADF); /* must be opened for writing */ if (((struct fd_formb *)addr)->format_version != FD_FORMAT_VERSION) return (EINVAL); /* wrong version of formatting prog */ error = fdmisccmd(dev, FDBIO_FORMAT, addr); break; case FD_GTYPE: /* get drive type */ *(struct fd_type *)addr = *fd->ft; break; case FD_STYPE: /* set drive type */ /* this is considered harmful; only allow for superuser */ if (suser(td) != 0) return (EPERM); *fd->ft = *(struct fd_type *)addr; break; case FD_GOPTS: /* get drive options */ *(int *)addr = fd->options; break; case FD_SOPTS: /* set drive options */ fd->options = *(int *)addr; break; #ifdef FDC_DEBUG case FD_DEBUG: if ((fd_debug != 0) != (*(int *)addr != 0)) { fd_debug = (*(int *)addr != 0); printf("fd%d: debugging turned %s\n", fd->fdu, fd_debug ? "on" : "off"); } break; #endif case FD_CLRERR: if (suser(td) != 0) return (EPERM); fd->fdc->fdc_errs = 0; break; case FD_GSTAT: fsp = (struct fdc_status *)addr; if ((fd->fdc->flags & FDC_STAT_VALID) == 0) return (EINVAL); memcpy(fsp->status, fd->fdc->status, 7 * sizeof(u_int)); break; case FD_READID: rid = (struct fdc_readid *)addr; if (rid->cyl > MAX_CYLINDER || rid->head > MAX_HEAD) return (EINVAL); error = fdmisccmd(dev, FDBIO_RDSECTID, addr); break; default: error = ENOTTY; break; } return (error); }