/* $NetBSD: ohci.c,v 1.23 1999/01/07 02:06:05 augustss Exp $ */ /* FreeBSD $Id: ohci.c,v 1.8 1999/01/10 18:42:51 n_hibma Exp $ */ /* * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Lennart Augustsson (augustss@carlstedt.se) at * Carlstedt Research & Technology. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * USB Open Host Controller driver. * * OHCI spec: http://www.intel.com/design/usb/ohci11d.pdf * USB spec: http://www.teleport.com/cgi-bin/mailmerge.cgi/~usb/cgiform.tpl */ #include #include #include #include #if defined(__NetBSD__) #include #elif defined(__FreeBSD__) #include #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #if defined(__FreeBSD__) #include #define delay(d) DELAY(d) #endif /* * The OHCI controller is little endian, so on big endian machines * the data strored in memory needs to be swapped. */ #if BYTE_ORDER == BIG_ENDIAN #define LE(x) (bswap32(x)) #else #define LE(x) (x) #endif struct ohci_pipe; ohci_soft_ed_t *ohci_alloc_sed __P((ohci_softc_t *)); void ohci_free_sed __P((ohci_softc_t *, ohci_soft_ed_t *)); ohci_soft_td_t *ohci_alloc_std __P((ohci_softc_t *)); void ohci_free_std __P((ohci_softc_t *, ohci_soft_td_t *)); usbd_status ohci_open __P((usbd_pipe_handle)); void ohci_poll __P((struct usbd_bus *)); void ohci_waitintr __P((ohci_softc_t *, usbd_request_handle)); void ohci_rhsc __P((ohci_softc_t *, usbd_request_handle)); void ohci_process_done __P((ohci_softc_t *, ohci_physaddr_t)); void ohci_ii_done __P((ohci_softc_t *, usbd_request_handle)); void ohci_ctrl_done __P((ohci_softc_t *, usbd_request_handle)); void ohci_intr_done __P((ohci_softc_t *, usbd_request_handle)); void ohci_bulk_done __P((ohci_softc_t *, usbd_request_handle)); usbd_status ohci_device_request __P((usbd_request_handle reqh)); void ohci_add_ed __P((ohci_soft_ed_t *, ohci_soft_ed_t *)); void ohci_rem_ed __P((ohci_soft_ed_t *, ohci_soft_ed_t *)); void ohci_hash_add_td __P((ohci_softc_t *, ohci_soft_td_t *)); void ohci_hash_rem_td __P((ohci_softc_t *, ohci_soft_td_t *)); ohci_soft_td_t *ohci_hash_find_td __P((ohci_softc_t *, ohci_physaddr_t)); usbd_status ohci_root_ctrl_transfer __P((usbd_request_handle)); usbd_status ohci_root_ctrl_start __P((usbd_request_handle)); void ohci_root_ctrl_abort __P((usbd_request_handle)); void ohci_root_ctrl_close __P((usbd_pipe_handle)); usbd_status ohci_root_intr_transfer __P((usbd_request_handle)); usbd_status ohci_root_intr_start __P((usbd_request_handle)); void ohci_root_intr_abort __P((usbd_request_handle)); void ohci_root_intr_close __P((usbd_pipe_handle)); usbd_status ohci_device_ctrl_transfer __P((usbd_request_handle)); usbd_status ohci_device_ctrl_start __P((usbd_request_handle)); void ohci_device_ctrl_abort __P((usbd_request_handle)); void ohci_device_ctrl_close __P((usbd_pipe_handle)); usbd_status ohci_device_bulk_transfer __P((usbd_request_handle)); usbd_status ohci_device_bulk_start __P((usbd_request_handle)); void ohci_device_bulk_abort __P((usbd_request_handle)); void ohci_device_bulk_close __P((usbd_pipe_handle)); usbd_status ohci_device_intr_transfer __P((usbd_request_handle)); usbd_status ohci_device_intr_start __P((usbd_request_handle)); void ohci_device_intr_abort __P((usbd_request_handle)); void ohci_device_intr_close __P((usbd_pipe_handle)); usbd_status ohci_device_setintr __P((ohci_softc_t *sc, struct ohci_pipe *pipe, int ival)); int ohci_str __P((usb_string_descriptor_t *, int, char *)); void ohci_timeout __P((void *)); void ohci_rhsc_able __P((ohci_softc_t *, int)); #ifdef USB_DEBUG ohci_softc_t *thesc; void ohci_dumpregs __P((ohci_softc_t *)); void ohci_dump_tds __P((ohci_soft_td_t *)); void ohci_dump_td __P((ohci_soft_td_t *)); void ohci_dump_ed __P((ohci_soft_ed_t *)); #endif #if defined(__NetBSD__) #define OWRITE4(sc, r, x) bus_space_write_4((sc)->iot, (sc)->ioh, (r), (x)) #define OREAD4(sc, r) bus_space_read_4((sc)->iot, (sc)->ioh, (r)) #define OREAD2(sc, r) bus_space_read_2((sc)->iot, (sc)->ioh, (r)) #elif defined(__FreeBSD__) #define OWRITE4(sc, r, x) *(unsigned int *) ((sc)->sc_iobase + (r)) = x #define OREAD4(sc, r) (*(unsigned int *) ((sc)->sc_iobase + (r))) #define OREAD2(sc, r) (*(unsigned short *) ((sc)->sc_iobase + (r))) #endif /* Reverse the bits in a value 0 .. 31 */ static u_int8_t revbits[OHCI_NO_INTRS] = { 0x00, 0x10, 0x08, 0x18, 0x04, 0x14, 0x0c, 0x1c, 0x02, 0x12, 0x0a, 0x1a, 0x06, 0x16, 0x0e, 0x1e, 0x01, 0x11, 0x09, 0x19, 0x05, 0x15, 0x0d, 0x1d, 0x03, 0x13, 0x0b, 0x1b, 0x07, 0x17, 0x0f, 0x1f }; struct ohci_pipe { struct usbd_pipe pipe; ohci_soft_ed_t *sed; ohci_soft_td_t *tail; /* Info needed for different pipe kinds. */ union { /* Control pipe */ struct { usb_dma_t datadma; usb_dma_t reqdma; u_int length; ohci_soft_td_t *setup, *xfer, *stat; } ctl; /* Interrupt pipe */ struct { usb_dma_t datadma; int nslots; int pos; } intr; /* Bulk pipe */ struct { usb_dma_t datadma; u_int length; } bulk; } u; }; #define OHCI_INTR_ENDPT 1 struct usbd_methods ohci_root_ctrl_methods = { ohci_root_ctrl_transfer, ohci_root_ctrl_start, ohci_root_ctrl_abort, ohci_root_ctrl_close, 0, }; struct usbd_methods ohci_root_intr_methods = { ohci_root_intr_transfer, ohci_root_intr_start, ohci_root_intr_abort, ohci_root_intr_close, 0, }; struct usbd_methods ohci_device_ctrl_methods = { ohci_device_ctrl_transfer, ohci_device_ctrl_start, ohci_device_ctrl_abort, ohci_device_ctrl_close, 0, }; struct usbd_methods ohci_device_intr_methods = { ohci_device_intr_transfer, ohci_device_intr_start, ohci_device_intr_abort, ohci_device_intr_close, }; struct usbd_methods ohci_device_bulk_methods = { ohci_device_bulk_transfer, ohci_device_bulk_start, ohci_device_bulk_abort, ohci_device_bulk_close, 0, }; ohci_soft_ed_t * ohci_alloc_sed(sc) ohci_softc_t *sc; { ohci_soft_ed_t *sed; usbd_status r; int i, offs; usb_dma_t dma; if (!sc->sc_freeeds) { DPRINTFN(2, ("ohci_alloc_sed: allocating chunk\n")); sed = malloc(sizeof(ohci_soft_ed_t) * OHCI_ED_CHUNK, M_USBDEV, M_NOWAIT); if (!sed) return 0; r = usb_allocmem(sc->sc_dmatag, OHCI_ED_SIZE * OHCI_ED_CHUNK, OHCI_ED_ALIGN, &dma); if (r != USBD_NORMAL_COMPLETION) { free(sed, M_USBDEV); return 0; } for(i = 0; i < OHCI_ED_CHUNK; i++, sed++) { offs = i * OHCI_ED_SIZE; sed->physaddr = DMAADDR(&dma) + offs; sed->ed = (ohci_ed_t *) ((char *)KERNADDR(&dma) + offs); sed->next = sc->sc_freeeds; sc->sc_freeeds = sed; } } sed = sc->sc_freeeds; sc->sc_freeeds = sed->next; memset(sed->ed, 0, OHCI_ED_SIZE); sed->next = 0; return sed; } void ohci_free_sed(sc, sed) ohci_softc_t *sc; ohci_soft_ed_t *sed; { sed->next = sc->sc_freeeds; sc->sc_freeeds = sed; } ohci_soft_td_t * ohci_alloc_std(sc) ohci_softc_t *sc; { ohci_soft_td_t *std; usbd_status r; int i, offs; usb_dma_t dma; if (!sc->sc_freetds) { DPRINTFN(2, ("ohci_alloc_std: allocating chunk\n")); std = malloc(sizeof(ohci_soft_td_t) * OHCI_TD_CHUNK, M_USBDEV, M_NOWAIT); if (!std) return 0; r = usb_allocmem(sc->sc_dmatag, OHCI_TD_SIZE * OHCI_TD_CHUNK, OHCI_TD_ALIGN, &dma); if (r != USBD_NORMAL_COMPLETION) { free(std, M_USBDEV); return 0; } for(i = 0; i < OHCI_TD_CHUNK; i++, std++) { offs = i * OHCI_TD_SIZE; std->physaddr = DMAADDR(&dma) + offs; std->td = (ohci_td_t *) ((char *)KERNADDR(&dma) + offs); std->nexttd = sc->sc_freetds; sc->sc_freetds = std; } } std = sc->sc_freetds; sc->sc_freetds = std->nexttd; memset(std->td, 0, OHCI_TD_SIZE); std->nexttd = 0; return (std); } void ohci_free_std(sc, std) ohci_softc_t *sc; ohci_soft_td_t *std; { std->nexttd = sc->sc_freetds; sc->sc_freetds = std; } usbd_status ohci_init(sc) ohci_softc_t *sc; { ohci_soft_ed_t *sed, *psed; usbd_status r; int rev; int i; u_int32_t s, ctl, ival, hcr, fm, per; DPRINTF(("ohci_init: start\n")); rev = OREAD4(sc, OHCI_REVISION); printf("%s: OHCI version %d.%d%s\n", USBDEVNAME(sc->sc_bus.bdev), OHCI_REV_HI(rev), OHCI_REV_LO(rev), OHCI_REV_LEGACY(rev) ? ", legacy support" : ""); if (OHCI_REV_HI(rev) != 1 || OHCI_REV_LO(rev) != 0) { printf("%s: unsupported OHCI revision\n", USBDEVNAME(sc->sc_bus.bdev)); return (USBD_INVAL); } for (i = 0; i < OHCI_HASH_SIZE; i++) LIST_INIT(&sc->sc_hash_tds[i]); /* Allocate the HCCA area. */ r = usb_allocmem(sc->sc_dmatag, OHCI_HCCA_SIZE, OHCI_HCCA_ALIGN, &sc->sc_hccadma); if (r != USBD_NORMAL_COMPLETION) return (r); sc->sc_hcca = (struct ohci_hcca *)KERNADDR(&sc->sc_hccadma); memset(sc->sc_hcca, 0, OHCI_HCCA_SIZE); sc->sc_eintrs = OHCI_NORMAL_INTRS; sc->sc_ctrl_head = ohci_alloc_sed(sc); if (!sc->sc_ctrl_head) { r = USBD_NOMEM; goto bad1; } sc->sc_ctrl_head->ed->ed_flags |= LE(OHCI_ED_SKIP); sc->sc_bulk_head = ohci_alloc_sed(sc); if (!sc->sc_bulk_head) { r = USBD_NOMEM; goto bad2; } sc->sc_bulk_head->ed->ed_flags |= LE(OHCI_ED_SKIP); /* Allocate all the dummy EDs that make up the interrupt tree. */ for (i = 0; i < OHCI_NO_EDS; i++) { sed = ohci_alloc_sed(sc); if (!sed) { while (--i >= 0) ohci_free_sed(sc, sc->sc_eds[i]); r = USBD_NOMEM; goto bad3; } /* All ED fields are set to 0. */ sc->sc_eds[i] = sed; sed->ed->ed_flags |= LE(OHCI_ED_SKIP); if (i != 0) { psed = sc->sc_eds[(i-1) / 2]; sed->next = psed; sed->ed->ed_nexted = LE(psed->physaddr); } } /* * Fill HCCA interrupt table. The bit reversal is to get * the tree set up properly to spread the interrupts. */ for (i = 0; i < OHCI_NO_INTRS; i++) sc->sc_hcca->hcca_interrupt_table[revbits[i]] = LE(sc->sc_eds[OHCI_NO_EDS-OHCI_NO_INTRS+i]->physaddr); /* Determine in what context we are running. */ ctl = OREAD4(sc, OHCI_CONTROL); if (ctl & OHCI_IR) { /* SMM active, request change */ DPRINTF(("ohci_init: SMM active, request owner change\n")); s = OREAD4(sc, OHCI_COMMAND_STATUS); OWRITE4(sc, OHCI_COMMAND_STATUS, s | OHCI_OCR); for (i = 0; i < 100 && (ctl & OHCI_IR); i++) { delay(1000); ctl = OREAD4(sc, OHCI_CONTROL); } if ((ctl & OHCI_IR) == 0) { printf("%s: SMM does not respond, resetting\n", USBDEVNAME(sc->sc_bus.bdev)); OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); goto reset; } } else if ((ctl & OHCI_HCFS_MASK) != OHCI_HCFS_RESET) { /* BIOS started controller. */ DPRINTF(("ohci_init: BIOS active\n")); if ((ctl & OHCI_HCFS_MASK) != OHCI_HCFS_OPERATIONAL) { OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_OPERATIONAL); delay(USB_RESUME_DELAY * 1000); } } else { DPRINTF(("ohci_init: cold started\n")); reset: /* Controller was cold started. */ delay(USB_BUS_RESET_DELAY * 1000); } /* * This reset should not be necessary according to the OHCI spec, but * without it some controllers do not start. */ DPRINTF(("%s: resetting\n", USBDEVNAME(sc->sc_bus.bdev))); OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); delay(USB_BUS_RESET_DELAY * 1000); /* We now own the host controller and the bus has been reset. */ ival = OHCI_GET_IVAL(OREAD4(sc, OHCI_FM_INTERVAL)); OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_HCR); /* Reset HC */ /* Nominal time for a reset is 10 us. */ for (i = 0; i < 10; i++) { delay(10); hcr = OREAD4(sc, OHCI_COMMAND_STATUS) & OHCI_HCR; if (!hcr) break; } if (hcr) { printf("%s: reset timeout\n", USBDEVNAME(sc->sc_bus.bdev)); r = USBD_IOERROR; goto bad3; } #ifdef USB_DEBUG thesc = sc; if (ohcidebug > 15) ohci_dumpregs(sc); #endif /* The controller is now in suspend state, we have 2ms to finish. */ /* Set up HC registers. */ OWRITE4(sc, OHCI_HCCA, DMAADDR(&sc->sc_hccadma)); OWRITE4(sc, OHCI_CONTROL_HEAD_ED, sc->sc_ctrl_head->physaddr); OWRITE4(sc, OHCI_BULK_HEAD_ED, sc->sc_bulk_head->physaddr); OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_ALL_INTRS); OWRITE4(sc, OHCI_INTERRUPT_ENABLE, sc->sc_eintrs | OHCI_MIE); ctl = OREAD4(sc, OHCI_CONTROL); ctl &= ~(OHCI_CBSR_MASK | OHCI_LES | OHCI_HCFS_MASK | OHCI_IR); ctl |= OHCI_PLE | OHCI_IE | OHCI_CLE | OHCI_BLE | OHCI_RATIO_1_4 | OHCI_HCFS_OPERATIONAL; /* And finally start it! */ OWRITE4(sc, OHCI_CONTROL, ctl); /* * The controller is now OPERATIONAL. Set a some final * registers that should be set earlier, but that the * controller ignores when in the SUSPEND state. */ fm = (OREAD4(sc, OHCI_FM_INTERVAL) & OHCI_FIT) ^ OHCI_FIT; fm |= OHCI_FSMPS(ival) | ival; OWRITE4(sc, OHCI_FM_INTERVAL, fm); per = OHCI_PERIODIC(ival); /* 90% periodic */ OWRITE4(sc, OHCI_PERIODIC_START, per); OWRITE4(sc, OHCI_RH_STATUS, OHCI_LPSC); /* Enable port power */ sc->sc_noport = OHCI_GET_NDP(OREAD4(sc, OHCI_RH_DESCRIPTOR_A)); #ifdef USB_DEBUG if (ohcidebug > 5) ohci_dumpregs(sc); #endif /* Set up the bus struct. */ sc->sc_bus.open_pipe = ohci_open; sc->sc_bus.pipe_size = sizeof(struct ohci_pipe); sc->sc_bus.do_poll = ohci_poll; return (USBD_NORMAL_COMPLETION); bad3: ohci_free_sed(sc, sc->sc_ctrl_head); bad2: ohci_free_sed(sc, sc->sc_bulk_head); bad1: usb_freemem(sc->sc_dmatag, &sc->sc_hccadma); return (r); } #ifdef USB_DEBUG void ohcidump(void); void ohcidump(void) { ohci_dumpregs(thesc); } void ohci_dumpregs(sc) ohci_softc_t *sc; { printf("ohci_dumpregs: rev=0x%08x control=0x%08x command=0x%08x\n", OREAD4(sc, OHCI_REVISION), OREAD4(sc, OHCI_CONTROL), OREAD4(sc, OHCI_COMMAND_STATUS)); printf(" intrstat=0x%08x intre=0x%08x intrd=0x%08x\n", OREAD4(sc, OHCI_INTERRUPT_STATUS), OREAD4(sc, OHCI_INTERRUPT_ENABLE), OREAD4(sc, OHCI_INTERRUPT_DISABLE)); printf(" hcca=0x%08x percur=0x%08x ctrlhd=0x%08x\n", OREAD4(sc, OHCI_HCCA), OREAD4(sc, OHCI_PERIOD_CURRENT_ED), OREAD4(sc, OHCI_CONTROL_HEAD_ED)); printf(" ctrlcur=0x%08x bulkhd=0x%08x bulkcur=0x%08x\n", OREAD4(sc, OHCI_CONTROL_CURRENT_ED), OREAD4(sc, OHCI_BULK_HEAD_ED), OREAD4(sc, OHCI_BULK_CURRENT_ED)); printf(" done=0x%08x fmival=0x%08x fmrem=0x%08x\n", OREAD4(sc, OHCI_DONE_HEAD), OREAD4(sc, OHCI_FM_INTERVAL), OREAD4(sc, OHCI_FM_REMAINING)); printf(" fmnum=0x%08x perst=0x%08x lsthrs=0x%08x\n", OREAD4(sc, OHCI_FM_NUMBER), OREAD4(sc, OHCI_PERIODIC_START), OREAD4(sc, OHCI_LS_THRESHOLD)); printf(" desca=0x%08x descb=0x%08x stat=0x%08x\n", OREAD4(sc, OHCI_RH_DESCRIPTOR_A), OREAD4(sc, OHCI_RH_DESCRIPTOR_B), OREAD4(sc, OHCI_RH_STATUS)); printf(" port1=0x%08x port2=0x%08x\n", OREAD4(sc, OHCI_RH_PORT_STATUS(1)), OREAD4(sc, OHCI_RH_PORT_STATUS(2))); printf(" HCCA: frame_number=0x%04x done_head=0x%08x\n", LE(sc->sc_hcca->hcca_frame_number), LE(sc->sc_hcca->hcca_done_head)); } #endif int ohci_intr(p) void *p; { ohci_softc_t *sc = p; u_int32_t intrs, eintrs; ohci_physaddr_t done; /* In case the interrupt occurs before initialization has completed. */ if (sc == NULL || sc->sc_hcca == NULL) { /* NWH added sc==0 */ #ifdef DIAGNOSTIC printf("ohci_intr: sc->sc_hcca == NULL\n"); #endif return (0); } done = LE(sc->sc_hcca->hcca_done_head); if (done != 0) { intrs = OHCI_WDH; if (done & OHCI_DONE_INTRS) intrs |= OREAD4(sc, OHCI_INTERRUPT_STATUS); } else intrs = OREAD4(sc, OHCI_INTERRUPT_STATUS); if (!intrs) return (0); intrs &= ~OHCI_MIE; OWRITE4(sc, OHCI_INTERRUPT_STATUS, intrs); /* Acknowledge */ eintrs = intrs & sc->sc_eintrs; if (!eintrs) return (0); sc->sc_intrs++; DPRINTFN(7, ("ohci_intr: sc=%p intrs=%x(%x) eintr=%x\n", sc, (u_int)intrs, OREAD4(sc, OHCI_INTERRUPT_STATUS), (u_int)eintrs)); if (eintrs & OHCI_SO) { printf("%s: scheduling overrun\n",USBDEVNAME(sc->sc_bus.bdev)); /* XXX do what */ intrs &= ~OHCI_SO; } if (eintrs & OHCI_WDH) { ohci_process_done(sc, done &~ OHCI_DONE_INTRS); sc->sc_hcca->hcca_done_head = 0; intrs &= ~OHCI_WDH; } if (eintrs & OHCI_RD) { /* XXX process resume detect */ } if (eintrs & OHCI_UE) { printf("%s: unrecoverable error, controller halted\n", USBDEVNAME(sc->sc_bus.bdev)); OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); /* XXX what else */ } if (eintrs & OHCI_RHSC) { ohci_rhsc(sc, sc->sc_intrreqh); intrs &= ~OHCI_RHSC; /* * Disable RHSC interrupt for now, because it will be * on until the port has been reset. */ ohci_rhsc_able(sc, 0); } /* Block unprocessed interrupts. XXX */ OWRITE4(sc, OHCI_INTERRUPT_DISABLE, intrs); sc->sc_eintrs &= ~intrs; return (1); } void ohci_rhsc_able(sc, on) ohci_softc_t *sc; int on; { DPRINTFN(4, ("ohci_rhsc_able: on=%d\n", on)); if (on) { sc->sc_eintrs |= OHCI_RHSC; OWRITE4(sc, OHCI_INTERRUPT_ENABLE, OHCI_RHSC); } else { sc->sc_eintrs &= ~OHCI_RHSC; OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_RHSC); } } #ifdef USB_DEBUG char *ohci_cc_strs[] = { "NO_ERROR", "CRC", "BIT_STUFFING", "DATA_TOGGLE_MISMATCH", "STALL", "DEVICE_NOT_RESPONDING", "PID_CHECK_FAILURE", "UNEXPECTED_PID", "DATA_OVERRUN", "DATA_UNDERRUN", "BUFFER_OVERRUN", "BUFFER_UNDERRUN", "NOT_ACCESSED", }; #endif void ohci_process_done(sc, done) ohci_softc_t *sc; ohci_physaddr_t done; { ohci_soft_td_t *std, *sdone; usbd_request_handle reqh; int len, cc; DPRINTFN(10,("ohci_process_done: done=0x%08lx\n", (u_long)done)); /* Reverse the done list. */ for (sdone = 0; done; done = LE(std->td->td_nexttd)) { std = ohci_hash_find_td(sc, done); std->dnext = sdone; sdone = std; } #ifdef USB_DEBUG if (ohcidebug > 10) { printf("ohci_process_done: TD done:\n"); ohci_dump_tds(sdone); } #endif for (std = sdone; std; std = std->dnext) { reqh = std->reqh; DPRINTFN(10, ("ohci_process_done: std=%p reqh=%p\n",std,reqh)); cc = OHCI_TD_GET_CC(LE(std->td->td_flags)); if (cc == OHCI_CC_NO_ERROR) { if (std->td->td_cbp == 0) len = std->len; else len = LE(std->td->td_be) - LE(std->td->td_cbp) + 1; /* * Only do a callback on the last stage of a transfer. * Others have hcpriv = 0. */ if ((reqh->pipe->endpoint->edesc->bmAttributes & UE_XFERTYPE) == UE_CONTROL) { /* For a control transfer the length is in * the xfer stage */ if (reqh->hcpriv == std) { reqh->status = USBD_NORMAL_COMPLETION; ohci_ii_done(sc, reqh); } else reqh->actlen = len; } else { if (reqh->hcpriv == std) { reqh->actlen = len; reqh->status = USBD_NORMAL_COMPLETION; ohci_ii_done(sc, reqh); } } } else { ohci_soft_td_t *p, *n; struct ohci_pipe *opipe = (struct ohci_pipe *)reqh->pipe; DPRINTFN(-1,("ohci_process_done: error cc=%d (%s)\n", OHCI_TD_GET_CC(LE(std->td->td_flags)), ohci_cc_strs[OHCI_TD_GET_CC(LE(std->td->td_flags))])); /* * Endpoint is halted. First unlink all the TDs * belonging to the failed transfer, and then restart * the endpoint. */ for (p = std->nexttd; p->reqh == reqh; p = n) { n = p->nexttd; ohci_hash_rem_td(sc, p); ohci_free_std(sc, p); } /* clear halt */ opipe->sed->ed->ed_headp = LE(p->physaddr); OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); if (cc == OHCI_CC_STALL) reqh->status = USBD_STALLED; else reqh->status = USBD_IOERROR; ohci_ii_done(sc, reqh); } ohci_hash_rem_td(sc, std); ohci_free_std(sc, std); } } void ohci_ii_done(sc, reqh) ohci_softc_t *sc; usbd_request_handle reqh; { switch (reqh->pipe->endpoint->edesc->bmAttributes & UE_XFERTYPE) { case UE_CONTROL: ohci_ctrl_done(sc, reqh); usb_start_next(reqh->pipe); break; case UE_INTERRUPT: ohci_intr_done(sc, reqh); break; case UE_BULK: ohci_bulk_done(sc, reqh); usb_start_next(reqh->pipe); break; case UE_ISOCHRONOUS: printf("ohci_process_done: ISO done?\n"); usb_start_next(reqh->pipe); break; } /* And finally execute callback. */ reqh->xfercb(reqh); } void ohci_ctrl_done(sc, reqh) ohci_softc_t *sc; usbd_request_handle reqh; { struct ohci_pipe *opipe = (struct ohci_pipe *)reqh->pipe; u_int len = opipe->u.ctl.length; usb_dma_t *dma; DPRINTFN(10,("ohci_ctrl_done: reqh=%p\n", reqh)); if (!reqh->isreq) { panic("ohci_ctrl_done: not a request\n"); return; } if (len != 0) { dma = &opipe->u.ctl.datadma; if (reqh->request.bmRequestType & UT_READ) memcpy(reqh->buffer, KERNADDR(dma), len); usb_freemem(sc->sc_dmatag, dma); } usb_untimeout(ohci_timeout, reqh, reqh->timo_handle); } void ohci_intr_done(sc, reqh) ohci_softc_t *sc; usbd_request_handle reqh; { struct ohci_pipe *opipe = (struct ohci_pipe *)reqh->pipe; usb_dma_t *dma; ohci_soft_ed_t *sed = opipe->sed; ohci_soft_td_t *xfer, *tail; DPRINTFN(10,("ohci_intr_done: reqh=%p, actlen=%d\n", reqh, reqh->actlen)); dma = &opipe->u.intr.datadma; memcpy(reqh->buffer, KERNADDR(dma), reqh->actlen); if (reqh->pipe->intrreqh == reqh) { xfer = opipe->tail; tail = ohci_alloc_std(sc); /* XXX should reuse TD */ if (!tail) { reqh->status = USBD_NOMEM; return; } tail->reqh = 0; xfer->td->td_flags = LE( OHCI_TD_IN | OHCI_TD_NOCC | OHCI_TD_SET_DI(1) | OHCI_TD_TOGGLE_CARRY); if (reqh->flags & USBD_SHORT_XFER_OK) xfer->td->td_flags |= LE(OHCI_TD_R); xfer->td->td_cbp = LE(DMAADDR(dma)); xfer->nexttd = tail; xfer->td->td_nexttd = LE(tail->physaddr); xfer->td->td_be = LE(LE(xfer->td->td_cbp) + reqh->length - 1); xfer->len = reqh->length; xfer->reqh = reqh; ohci_hash_add_td(sc, xfer); sed->ed->ed_tailp = LE(tail->physaddr); opipe->tail = tail; } else { usb_freemem(sc->sc_dmatag, dma); usb_start_next(reqh->pipe); } } void ohci_bulk_done(sc, reqh) ohci_softc_t *sc; usbd_request_handle reqh; { struct ohci_pipe *opipe = (struct ohci_pipe *)reqh->pipe; usb_dma_t *dma; DPRINTFN(10,("ohci_bulk_done: reqh=%p, actlen=%d\n", reqh, reqh->actlen)); dma = &opipe->u.bulk.datadma; if (reqh->request.bmRequestType & UT_READ) memcpy(reqh->buffer, KERNADDR(dma), reqh->actlen); usb_freemem(sc->sc_dmatag, dma); usb_untimeout(ohci_timeout, reqh, reqh->timo_handle); } void ohci_rhsc(sc, reqh) ohci_softc_t *sc; usbd_request_handle reqh; { usbd_pipe_handle pipe; struct ohci_pipe *opipe; u_char *p; int i, m; int hstatus; hstatus = OREAD4(sc, OHCI_RH_STATUS); DPRINTF(("ohci_rhsc: sc=%p reqh=%p hstatus=0x%08x\n", sc, reqh, hstatus)); if (reqh == 0) { /* Just ignore the change. */ return; } pipe = reqh->pipe; opipe = (struct ohci_pipe *)pipe; p = KERNADDR(&opipe->u.intr.datadma); m = min(sc->sc_noport, reqh->length * 8 - 1); memset(p, 0, reqh->length); for (i = 1; i <= m; i++) { if (OREAD4(sc, OHCI_RH_PORT_STATUS(i)) >> 16) p[i/8] |= 1 << (i%8); } DPRINTF(("ohci_rhsc: change=0x%02x\n", *p)); reqh->actlen = reqh->length; reqh->status = USBD_NORMAL_COMPLETION; reqh->xfercb(reqh); if (reqh->pipe->intrreqh != reqh) { sc->sc_intrreqh = 0; usb_freemem(sc->sc_dmatag, &opipe->u.intr.datadma); usb_start_next(reqh->pipe); } } /* * Wait here until controller claims to have an interrupt. * Then call ohci_intr and return. Use timeout to avoid waiting * too long. */ void ohci_waitintr(sc, reqh) ohci_softc_t *sc; usbd_request_handle reqh; { int timo = reqh->timeout; int usecs; u_int32_t intrs; reqh->status = USBD_IN_PROGRESS; for (usecs = timo * 1000000 / hz; usecs > 0; usecs -= 1000) { usb_delay_ms(&sc->sc_bus, 1); intrs = OREAD4(sc, OHCI_INTERRUPT_STATUS) & sc->sc_eintrs; DPRINTFN(10,("ohci_waitintr: 0x%04x\n", intrs)); #ifdef USB_DEBUG if (ohcidebug > 15) ohci_dumpregs(sc); #endif if (intrs) { ohci_intr(sc); if (reqh->status != USBD_IN_PROGRESS) return; } } /* Timeout */ DPRINTF(("ohci_waitintr: timeout\n")); reqh->status = USBD_TIMEOUT; ohci_ii_done(sc, reqh); /* XXX should free TD */ } void ohci_poll(bus) struct usbd_bus *bus; { ohci_softc_t *sc = (ohci_softc_t *)bus; if (OREAD4(sc, OHCI_INTERRUPT_STATUS) & sc->sc_eintrs) ohci_intr(sc); } usbd_status ohci_device_request(reqh) usbd_request_handle reqh; { struct ohci_pipe *opipe = (struct ohci_pipe *)reqh->pipe; usb_device_request_t *req = &reqh->request; usbd_device_handle dev = opipe->pipe.device; ohci_softc_t *sc = (ohci_softc_t *)dev->bus; int addr = dev->address; ohci_soft_td_t *setup, *xfer = 0, *stat, *next, *tail; ohci_soft_ed_t *sed; usb_dma_t *dmap; int isread; int len; usbd_status r; int s; isread = req->bmRequestType & UT_READ; len = UGETW(req->wLength); DPRINTFN(3,("ohci_device_control type=0x%02x, request=0x%02x, " "wValue=0x%04x, wIndex=0x%04x len=%d, addr=%d, endpt=%d\n", req->bmRequestType, req->bRequest, UGETW(req->wValue), UGETW(req->wIndex), len, addr, opipe->pipe.endpoint->edesc->bEndpointAddress)); setup = opipe->tail; stat = ohci_alloc_std(sc); if (!stat) { r = USBD_NOMEM; goto bad1; } tail = ohci_alloc_std(sc); if (!tail) { r = USBD_NOMEM; goto bad2; } tail->reqh = 0; sed = opipe->sed; dmap = &opipe->u.ctl.datadma; opipe->u.ctl.length = len; /* Update device address and length since they may have changed. */ /* XXX This only needs to be done once, but it's too early in open. */ sed->ed->ed_flags = LE( (LE(sed->ed->ed_flags) & ~(OHCI_ED_ADDRMASK | OHCI_ED_MAXPMASK)) | OHCI_ED_SET_FA(addr) | OHCI_ED_SET_MAXP(UGETW(opipe->pipe.endpoint->edesc->wMaxPacketSize))); /* Set up data transaction */ if (len != 0) { xfer = ohci_alloc_std(sc); if (!xfer) { r = USBD_NOMEM; goto bad3; } r = usb_allocmem(sc->sc_dmatag, len, 0, dmap); if (r != USBD_NORMAL_COMPLETION) goto bad4; xfer->td->td_flags = LE( (isread ? OHCI_TD_IN : OHCI_TD_OUT) | OHCI_TD_NOCC | OHCI_TD_TOGGLE_1 | OHCI_TD_NOINTR | (reqh->flags & USBD_SHORT_XFER_OK ? OHCI_TD_R : 0)); xfer->td->td_cbp = LE(DMAADDR(dmap)); xfer->nexttd = stat; xfer->td->td_nexttd = LE(stat->physaddr); xfer->td->td_be = LE(LE(xfer->td->td_cbp) + len - 1); xfer->len = len; xfer->reqh = reqh; next = xfer; } else next = stat; memcpy(KERNADDR(&opipe->u.ctl.reqdma), req, sizeof *req); if (!isread && len != 0) memcpy(KERNADDR(dmap), reqh->buffer, len); setup->td->td_flags = LE(OHCI_TD_SETUP | OHCI_TD_NOCC | OHCI_TD_TOGGLE_0 | OHCI_TD_NOINTR); setup->td->td_cbp = LE(DMAADDR(&opipe->u.ctl.reqdma)); setup->nexttd = next; setup->td->td_nexttd = LE(next->physaddr); setup->td->td_be = LE(LE(setup->td->td_cbp) + sizeof *req - 1); setup->len = 0; /* XXX The number of byte we count */ setup->reqh = reqh; stat->td->td_flags = LE( (isread ? OHCI_TD_OUT : OHCI_TD_IN) | OHCI_TD_NOCC | OHCI_TD_TOGGLE_1 | OHCI_TD_SET_DI(1)); stat->td->td_cbp = 0; stat->nexttd = tail; stat->td->td_nexttd = LE(tail->physaddr); stat->td->td_be = 0; stat->len = 0; stat->reqh = reqh; reqh->hcpriv = stat; #if USB_DEBUG if (ohcidebug > 5) { printf("ohci_device_request:\n"); ohci_dump_ed(sed); ohci_dump_tds(setup); } #endif /* Insert ED in schedule */ s = splusb(); ohci_hash_add_td(sc, setup); if (len != 0) ohci_hash_add_td(sc, xfer); ohci_hash_add_td(sc, stat); sed->ed->ed_tailp = LE(tail->physaddr); opipe->tail = tail; OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); if (reqh->timeout && !sc->sc_bus.use_polling) { usb_timeout(ohci_timeout, reqh, MS_TO_TICKS(reqh->timeout), reqh->timo_handle); } splx(s); #if USB_DEBUG if (ohcidebug > 5) { delay(5000); printf("ohci_device_request: status=%x\n", OREAD4(sc, OHCI_COMMAND_STATUS)); ohci_dump_ed(sed); ohci_dump_tds(setup); } #endif return (USBD_NORMAL_COMPLETION); bad4: ohci_free_std(sc, xfer); bad3: ohci_free_std(sc, tail); bad2: ohci_free_std(sc, stat); bad1: return (r); } /* * Add an ED to the schedule. Called at splusb(). */ void ohci_add_ed(sed, head) ohci_soft_ed_t *sed; ohci_soft_ed_t *head; { sed->next = head->next; sed->ed->ed_nexted = head->ed->ed_nexted; head->next = sed; head->ed->ed_nexted = LE(sed->physaddr); } /* * Remove an ED from the schedule. Called at splusb(). */ void ohci_rem_ed(sed, head) ohci_soft_ed_t *sed; ohci_soft_ed_t *head; { ohci_soft_ed_t *p; /* XXX */ for (p = head; p && p->next != sed; p = p->next) ; if (!p) panic("ohci_rem_ed: ED not found\n"); p->next = sed->next; p->ed->ed_nexted = sed->ed->ed_nexted; } /* * When a transfer is completed the TD is added to the done queue by * the host controller. This queue is the processed by software. * Unfortunately the queue contains the physical address of the TD * and we have no simple way to translate this back to a kernel address. * To make the translation possible (and fast) we use a hash table of * TDs currently in the schedule. The physical address is used as the * hash value. */ #define HASH(a) (((a) >> 4) % OHCI_HASH_SIZE) /* Called at splusb() */ void ohci_hash_add_td(sc, std) ohci_softc_t *sc; ohci_soft_td_t *std; { int h = HASH(std->physaddr); LIST_INSERT_HEAD(&sc->sc_hash_tds[h], std, hnext); } /* Called at splusb() */ void ohci_hash_rem_td(sc, std) ohci_softc_t *sc; ohci_soft_td_t *std; { LIST_REMOVE(std, hnext); } ohci_soft_td_t * ohci_hash_find_td(sc, a) ohci_softc_t *sc; ohci_physaddr_t a; { int h = HASH(a); ohci_soft_td_t *std; for (std = LIST_FIRST(&sc->sc_hash_tds[h]); std != 0; std = LIST_NEXT(std, hnext)) if (std->physaddr == a) return (std); panic("ohci_hash_find_td: addr 0x%08lx not found\n", (u_long)a); } void ohci_timeout(addr) void *addr; { #if 0 usbd_request_handle *reqh = addr; int s; DPRINTF(("ohci_timeout: reqh=%p\n", reqh)); s = splusb(); /* XXX need to inactivate TD before calling interrupt routine */ ohci_XXX_done(reqh); splx(s); #endif } #ifdef USB_DEBUG void ohci_dump_tds(std) ohci_soft_td_t *std; { for (; std; std = std->nexttd) ohci_dump_td(std); } void ohci_dump_td(std) ohci_soft_td_t *std; { printf("TD(%p) at %08lx: %b delay=%d ec=%d cc=%d\ncbp=0x%08lx " "nexttd=0x%08lx be=0x%08lx\n", std, (u_long)std->physaddr, (int)LE(std->td->td_flags), "\20\23R\24OUT\25IN\31TOG1\32SETTOGGLE", OHCI_TD_GET_DI(LE(std->td->td_flags)), OHCI_TD_GET_EC(LE(std->td->td_flags)), OHCI_TD_GET_CC(LE(std->td->td_flags)), (u_long)LE(std->td->td_cbp), (u_long)LE(std->td->td_nexttd), (u_long)LE(std->td->td_be)); } void ohci_dump_ed(sed) ohci_soft_ed_t *sed; { printf("ED(%p) at %08lx: addr=%d endpt=%d maxp=%d %b\ntailp=0x%08lx " "headp=%b nexted=0x%08lx\n", sed, (u_long)sed->physaddr, OHCI_ED_GET_FA(LE(sed->ed->ed_flags)), OHCI_ED_GET_EN(LE(sed->ed->ed_flags)), OHCI_ED_GET_MAXP(LE(sed->ed->ed_flags)), (int)LE(sed->ed->ed_flags), "\20\14OUT\15IN\16LOWSPEED\17SKIP\18ISO", (u_long)LE(sed->ed->ed_tailp), (int)LE(sed->ed->ed_headp), "\20\1HALT\2CARRY", (u_long)LE(sed->ed->ed_nexted)); } #endif usbd_status ohci_open(pipe) usbd_pipe_handle pipe; { usbd_device_handle dev = pipe->device; ohci_softc_t *sc = (ohci_softc_t *)dev->bus; usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc; struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; u_int8_t addr = dev->address; ohci_soft_ed_t *sed; ohci_soft_td_t *std; usbd_status r; int s; DPRINTFN(1, ("ohci_open: pipe=%p, addr=%d, endpt=%d (%d)\n", pipe, addr, ed->bEndpointAddress, sc->sc_addr)); if (addr == sc->sc_addr) { switch (ed->bEndpointAddress) { case USB_CONTROL_ENDPOINT: pipe->methods = &ohci_root_ctrl_methods; break; case UE_IN | OHCI_INTR_ENDPT: pipe->methods = &ohci_root_intr_methods; break; default: return (USBD_INVAL); } } else { sed = ohci_alloc_sed(sc); if (sed == 0) goto bad0; std = ohci_alloc_std(sc); if (std == 0) goto bad1; opipe->sed = sed; opipe->tail = std; sed->ed->ed_flags = LE( OHCI_ED_SET_FA(addr) | OHCI_ED_SET_EN(ed->bEndpointAddress) | OHCI_ED_DIR_TD | (dev->lowspeed ? OHCI_ED_SPEED : 0) | ((ed->bmAttributes & UE_XFERTYPE) == UE_ISOCHRONOUS ? OHCI_ED_FORMAT_ISO : OHCI_ED_FORMAT_GEN) | OHCI_ED_SET_MAXP(UGETW(ed->wMaxPacketSize))); sed->ed->ed_headp = sed->ed->ed_tailp = LE(std->physaddr); switch (ed->bmAttributes & UE_XFERTYPE) { case UE_CONTROL: pipe->methods = &ohci_device_ctrl_methods; r = usb_allocmem(sc->sc_dmatag, sizeof(usb_device_request_t), 0, &opipe->u.ctl.reqdma); if (r != USBD_NORMAL_COMPLETION) goto bad; s = splusb(); ohci_add_ed(sed, sc->sc_ctrl_head); splx(s); break; case UE_INTERRUPT: pipe->methods = &ohci_device_intr_methods; return (ohci_device_setintr(sc, opipe, ed->bInterval)); case UE_ISOCHRONOUS: printf("ohci_open: open iso unimplemented\n"); return (USBD_XXX); case UE_BULK: pipe->methods = &ohci_device_bulk_methods; s = splusb(); ohci_add_ed(sed, sc->sc_bulk_head); splx(s); break; } } return (USBD_NORMAL_COMPLETION); bad: ohci_free_std(sc, std); bad1: ohci_free_sed(sc, sed); bad0: return (USBD_NOMEM); } /* * Data structures and routines to emulate the root hub. */ usb_device_descriptor_t ohci_devd = { USB_DEVICE_DESCRIPTOR_SIZE, UDESC_DEVICE, /* type */ {0x00, 0x01}, /* USB version */ UCLASS_HUB, /* class */ USUBCLASS_HUB, /* subclass */ 0, /* protocol */ 64, /* max packet */ {0},{0},{0x00,0x01}, /* device id */ 1,2,0, /* string indicies */ 1 /* # of configurations */ }; usb_config_descriptor_t ohci_confd = { USB_CONFIG_DESCRIPTOR_SIZE, UDESC_CONFIG, {USB_CONFIG_DESCRIPTOR_SIZE + USB_INTERFACE_DESCRIPTOR_SIZE + USB_ENDPOINT_DESCRIPTOR_SIZE}, 1, 1, 0, UC_SELF_POWERED, 0 /* max power */ }; usb_interface_descriptor_t ohci_ifcd = { USB_INTERFACE_DESCRIPTOR_SIZE, UDESC_INTERFACE, 0, 0, 1, UCLASS_HUB, USUBCLASS_HUB, 0, 0 }; usb_endpoint_descriptor_t ohci_endpd = { USB_ENDPOINT_DESCRIPTOR_SIZE, UDESC_ENDPOINT, UE_IN | OHCI_INTR_ENDPT, UE_INTERRUPT, {8, 0}, /* max packet */ 255 }; usb_hub_descriptor_t ohci_hubd = { USB_HUB_DESCRIPTOR_SIZE, UDESC_HUB, 0, {0,0}, 0, 0, {0}, }; int ohci_str(p, l, s) usb_string_descriptor_t *p; int l; char *s; { int i; if (l == 0) return (0); p->bLength = 2 * strlen(s) + 2; if (l == 1) return (1); p->bDescriptorType = UDESC_STRING; l -= 2; for (i = 0; s[i] && l > 1; i++, l -= 2) USETW2(p->bString[i], 0, s[i]); return (2*i+2); } /* * Simulate a hardware hub by handling all the necessary requests. */ usbd_status ohci_root_ctrl_transfer(reqh) usbd_request_handle reqh; { int s; usbd_status r; s = splusb(); r = usb_insert_transfer(reqh); splx(s); if (r != USBD_NORMAL_COMPLETION) return (r); else return (ohci_root_ctrl_start(reqh)); } usbd_status ohci_root_ctrl_start(reqh) usbd_request_handle reqh; { ohci_softc_t *sc = (ohci_softc_t *)reqh->pipe->device->bus; usb_device_request_t *req; void *buf; int port, i; int len, value, index, l, totlen = 0; usb_port_status_t ps; usb_hub_descriptor_t hubd; usbd_status r; u_int32_t v; if (!reqh->isreq) /* XXX panic */ return (USBD_INVAL); req = &reqh->request; buf = reqh->buffer; DPRINTFN(4,("ohci_root_ctrl_control type=0x%02x request=%02x\n", req->bmRequestType, req->bRequest)); len = UGETW(req->wLength); value = UGETW(req->wValue); index = UGETW(req->wIndex); #define C(x,y) ((x) | ((y) << 8)) switch(C(req->bRequest, req->bmRequestType)) { case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE): case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE): case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT): /* * DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops * for the integrated root hub. */ break; case C(UR_GET_CONFIG, UT_READ_DEVICE): if (len > 0) { *(u_int8_t *)buf = sc->sc_conf; totlen = 1; } break; case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): DPRINTFN(8,("ohci_root_ctrl_control wValue=0x%04x\n", value)); switch(value >> 8) { case UDESC_DEVICE: if ((value & 0xff) != 0) { r = USBD_IOERROR; goto ret; } totlen = l = min(len, USB_DEVICE_DESCRIPTOR_SIZE); memcpy(buf, &ohci_devd, l); break; case UDESC_CONFIG: if ((value & 0xff) != 0) { r = USBD_IOERROR; goto ret; } totlen = l = min(len, USB_CONFIG_DESCRIPTOR_SIZE); memcpy(buf, &ohci_confd, l); buf = (char *)buf + l; len -= l; l = min(len, USB_INTERFACE_DESCRIPTOR_SIZE); totlen += l; memcpy(buf, &ohci_ifcd, l); buf = (char *)buf + l; len -= l; l = min(len, USB_ENDPOINT_DESCRIPTOR_SIZE); totlen += l; memcpy(buf, &ohci_endpd, l); break; case UDESC_STRING: if (len == 0) break; *(u_int8_t *)buf = 0; totlen = 1; switch (value & 0xff) { case 1: /* Vendor */ totlen = ohci_str(buf, len, sc->sc_vendor); break; case 2: /* Product */ totlen = ohci_str(buf, len, "OHCI root hub"); break; } break; default: r = USBD_IOERROR; goto ret; } break; case C(UR_GET_INTERFACE, UT_READ_INTERFACE): if (len > 0) { *(u_int8_t *)buf = 0; totlen = 1; } break; case C(UR_GET_STATUS, UT_READ_DEVICE): if (len > 1) { USETW(((usb_status_t *)buf)->wStatus,UDS_SELF_POWERED); totlen = 2; } break; case C(UR_GET_STATUS, UT_READ_INTERFACE): case C(UR_GET_STATUS, UT_READ_ENDPOINT): if (len > 1) { USETW(((usb_status_t *)buf)->wStatus, 0); totlen = 2; } break; case C(UR_SET_ADDRESS, UT_WRITE_DEVICE): if (value >= USB_MAX_DEVICES) { r = USBD_IOERROR; goto ret; } sc->sc_addr = value; break; case C(UR_SET_CONFIG, UT_WRITE_DEVICE): if (value != 0 && value != 1) { r = USBD_IOERROR; goto ret; } sc->sc_conf = value; break; case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE): break; case C(UR_SET_FEATURE, UT_WRITE_DEVICE): case C(UR_SET_FEATURE, UT_WRITE_INTERFACE): case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT): r = USBD_IOERROR; goto ret; case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE): break; case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT): break; /* Hub requests */ case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): break; case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): DPRINTFN(8, ("ohci_root_ctrl_control: UR_CLEAR_PORT_FEATURE " "port=%d feature=%d\n", index, value)); if (index < 1 || index > sc->sc_noport) { r = USBD_IOERROR; goto ret; } port = OHCI_RH_PORT_STATUS(index); switch(value) { case UHF_PORT_ENABLE: OWRITE4(sc, port, UPS_CURRENT_CONNECT_STATUS); break; case UHF_PORT_SUSPEND: OWRITE4(sc, port, UPS_OVERCURRENT_INDICATOR); break; case UHF_PORT_POWER: OWRITE4(sc, port, UPS_LOW_SPEED); break; case UHF_C_PORT_CONNECTION: OWRITE4(sc, port, UPS_C_CONNECT_STATUS << 16); break; case UHF_C_PORT_ENABLE: OWRITE4(sc, port, UPS_C_PORT_ENABLED << 16); break; case UHF_C_PORT_SUSPEND: OWRITE4(sc, port, UPS_C_SUSPEND << 16); break; case UHF_C_PORT_OVER_CURRENT: OWRITE4(sc, port, UPS_C_OVERCURRENT_INDICATOR << 16); break; case UHF_C_PORT_RESET: OWRITE4(sc, port, UPS_C_PORT_RESET << 16); break; default: r = USBD_IOERROR; goto ret; } switch(value) { case UHF_C_PORT_CONNECTION: case UHF_C_PORT_ENABLE: case UHF_C_PORT_SUSPEND: case UHF_C_PORT_OVER_CURRENT: case UHF_C_PORT_RESET: /* Enable RHSC interrupt if condition is cleared. */ if ((OREAD4(sc, port) >> 16) == 0) ohci_rhsc_able(sc, 1); break; default: break; } break; case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): if (value != 0) { r = USBD_IOERROR; goto ret; } v = OREAD4(sc, OHCI_RH_DESCRIPTOR_A); hubd = ohci_hubd; hubd.bNbrPorts = sc->sc_noport; USETW(hubd.wHubCharacteristics, (v & OHCI_NPS ? UHD_PWR_NO_SWITCH : v & OHCI_PSM ? UHD_PWR_GANGED : UHD_PWR_INDIVIDUAL) /* XXX overcurrent */ ); hubd.bPwrOn2PwrGood = OHCI_GET_POTPGT(v); v = OREAD4(sc, OHCI_RH_DESCRIPTOR_B); for (i = 0, l = sc->sc_noport; l > 0; i++, l -= 8, v >>= 8) hubd.DeviceRemovable[i++] = (u_int8_t)v; hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE + i; l = min(len, hubd.bDescLength); totlen = l; memcpy(buf, &hubd, l); break; case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): if (len != 4) { r = USBD_IOERROR; goto ret; } memset(buf, 0, len); /* ? XXX */ totlen = len; break; case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): DPRINTFN(8,("ohci_root_ctrl_transfer: get port status i=%d\n", index)); if (index < 1 || index > sc->sc_noport) { r = USBD_IOERROR; goto ret; } if (len != 4) { r = USBD_IOERROR; goto ret; } v = OREAD4(sc, OHCI_RH_PORT_STATUS(index)); DPRINTFN(8,("ohci_root_ctrl_transfer: port status=0x%04x\n", v)); USETW(ps.wPortStatus, v); USETW(ps.wPortChange, v >> 16); l = min(len, sizeof ps); memcpy(buf, &ps, l); totlen = l; break; case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): r = USBD_IOERROR; goto ret; case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): break; case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): if (index < 1 || index > sc->sc_noport) { r = USBD_IOERROR; goto ret; } port = OHCI_RH_PORT_STATUS(index); switch(value) { case UHF_PORT_ENABLE: OWRITE4(sc, port, UPS_PORT_ENABLED); break; case UHF_PORT_SUSPEND: OWRITE4(sc, port, UPS_SUSPEND); break; case UHF_PORT_RESET: DPRINTFN(5,("ohci_root_ctrl_transfer: reset port %d\n", index)); OWRITE4(sc, port, UPS_RESET); for (i = 0; i < 10; i++) { usb_delay_ms(&sc->sc_bus, 10); if ((OREAD4(sc, port) & UPS_RESET) == 0) break; } DPRINTFN(8,("ohci port %d reset, status = 0x%04x\n", index, OREAD4(sc, port))); break; case UHF_PORT_POWER: DPRINTFN(2,("ohci_root_ctrl_transfer: set port power " "%d\n", index)); OWRITE4(sc, port, UPS_PORT_POWER); break; default: r = USBD_IOERROR; goto ret; } break; default: r = USBD_IOERROR; goto ret; } reqh->actlen = totlen; r = USBD_NORMAL_COMPLETION; ret: reqh->status = r; reqh->xfercb(reqh); usb_start_next(reqh->pipe); return (USBD_IN_PROGRESS); } /* Abort a root control request. */ void ohci_root_ctrl_abort(reqh) usbd_request_handle reqh; { /* Nothing to do, all transfers are synchronous. */ } /* Close the root pipe. */ void ohci_root_ctrl_close(pipe) usbd_pipe_handle pipe; { DPRINTF(("ohci_root_ctrl_close\n")); } usbd_status ohci_root_intr_transfer(reqh) usbd_request_handle reqh; { int s; usbd_status r; s = splusb(); r = usb_insert_transfer(reqh); splx(s); if (r != USBD_NORMAL_COMPLETION) return (r); else return (ohci_root_intr_start(reqh)); } usbd_status ohci_root_intr_start(reqh) usbd_request_handle reqh; { usbd_pipe_handle pipe = reqh->pipe; ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; struct ohci_pipe *upipe = (struct ohci_pipe *)pipe; usb_dma_t *dmap; usbd_status r; int len; len = reqh->length; dmap = &upipe->u.intr.datadma; if (len == 0) return (USBD_INVAL); /* XXX should it be? */ r = usb_allocmem(sc->sc_dmatag, len, 0, dmap); if (r != USBD_NORMAL_COMPLETION) return (r); sc->sc_intrreqh = reqh; return (USBD_IN_PROGRESS); } /* Abort a root interrupt request. */ void ohci_root_intr_abort(reqh) usbd_request_handle reqh; { /* No need to abort. */ } /* Close the root pipe. */ void ohci_root_intr_close(pipe) usbd_pipe_handle pipe; { ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; sc->sc_intrreqh = 0; DPRINTF(("ohci_root_intr_close\n")); } /************************/ usbd_status ohci_device_ctrl_transfer(reqh) usbd_request_handle reqh; { int s; usbd_status r; s = splusb(); r = usb_insert_transfer(reqh); splx(s); if (r != USBD_NORMAL_COMPLETION) return (r); else return (ohci_device_ctrl_start(reqh)); } usbd_status ohci_device_ctrl_start(reqh) usbd_request_handle reqh; { ohci_softc_t *sc = (ohci_softc_t *)reqh->pipe->device->bus; usbd_status r; if (!reqh->isreq) { /* XXX panic */ printf("ohci_device_ctrl_transfer: not a request\n"); return (USBD_INVAL); } r = ohci_device_request(reqh); if (r != USBD_NORMAL_COMPLETION) return (r); if (sc->sc_bus.use_polling) ohci_waitintr(sc, reqh); return (USBD_IN_PROGRESS); } /* Abort a device control request. */ void ohci_device_ctrl_abort(reqh) usbd_request_handle reqh; { /* XXX inactivate */ usb_delay_ms(reqh->pipe->device->bus, 1); /* make sure it is donw */ /* XXX call done */ } /* Close a device control pipe. */ void ohci_device_ctrl_close(pipe) usbd_pipe_handle pipe; { struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; ohci_soft_ed_t *sed = opipe->sed; int s; s = splusb(); sed->ed->ed_flags |= LE(OHCI_ED_SKIP); if ((LE(sed->ed->ed_tailp) & OHCI_TAILMASK) != LE(sed->ed->ed_headp)) usb_delay_ms(&sc->sc_bus, 2); ohci_rem_ed(sed, sc->sc_ctrl_head); splx(s); ohci_free_std(sc, opipe->tail); ohci_free_sed(sc, opipe->sed); /* XXX free other resources */ } /************************/ usbd_status ohci_device_bulk_transfer(reqh) usbd_request_handle reqh; { int s; usbd_status r; s = splusb(); r = usb_insert_transfer(reqh); splx(s); if (r != USBD_NORMAL_COMPLETION) return (r); else return (ohci_device_bulk_start(reqh)); } usbd_status ohci_device_bulk_start(reqh) usbd_request_handle reqh; { struct ohci_pipe *opipe = (struct ohci_pipe *)reqh->pipe; usbd_device_handle dev = opipe->pipe.device; ohci_softc_t *sc = (ohci_softc_t *)dev->bus; int addr = dev->address; ohci_soft_td_t *xfer, *tail; ohci_soft_ed_t *sed; usb_dma_t *dmap; usbd_status r; int s, len, isread; if (reqh->isreq) { /* XXX panic */ printf("ohci_device_bulk_transfer: a request\n"); return (USBD_INVAL); } len = reqh->length; dmap = &opipe->u.bulk.datadma; isread = reqh->pipe->endpoint->edesc->bEndpointAddress & UE_IN; sed = opipe->sed; opipe->u.bulk.length = len; r = usb_allocmem(sc->sc_dmatag, len, 0, dmap); if (r != USBD_NORMAL_COMPLETION) goto ret1; tail = ohci_alloc_std(sc); if (!tail) { r = USBD_NOMEM; goto ret2; } tail->reqh = 0; /* Update device address */ sed->ed->ed_flags = LE( (LE(sed->ed->ed_flags) & ~OHCI_ED_ADDRMASK) | OHCI_ED_SET_FA(addr)); /* Set up data transaction */ xfer = opipe->tail; xfer->td->td_flags = LE( (isread ? OHCI_TD_IN : OHCI_TD_OUT) | OHCI_TD_NOCC | OHCI_TD_SET_DI(1) | OHCI_TD_TOGGLE_CARRY | (reqh->flags & USBD_SHORT_XFER_OK ? OHCI_TD_R : 0)); xfer->td->td_cbp = LE(DMAADDR(dmap)); xfer->nexttd = tail; xfer->td->td_nexttd = LE(tail->physaddr); xfer->td->td_be = LE(LE(xfer->td->td_cbp) + len - 1); xfer->len = len; xfer->reqh = reqh; reqh->hcpriv = xfer; if (!isread) memcpy(KERNADDR(dmap), reqh->buffer, len); /* Insert ED in schedule */ s = splusb(); ohci_hash_add_td(sc, xfer); sed->ed->ed_tailp = LE(tail->physaddr); opipe->tail = tail; OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_BLF); if (reqh->timeout && !sc->sc_bus.use_polling) { usb_timeout(ohci_timeout, reqh, MS_TO_TICKS(reqh->timeout), reqh->timo_handle); } splx(s); return (USBD_IN_PROGRESS); ret2: usb_freemem(sc->sc_dmatag, dmap); ret1: return (r); } /* Abort a device bulk request. */ void ohci_device_bulk_abort(reqh) usbd_request_handle reqh; { #if 0 sed->ed->ed_flags |= LE(OHCI_ED_SKIP); if ((LE(sed->ed->ed_tailp) & OHCI_TAILMASK) != LE(sed->ed->ed_headp)) usb_delay_ms(reqh->pipe->device->bus, 2); #endif /* XXX inactivate */ usb_delay_ms(reqh->pipe->device->bus, 1); /* make sure it is done */ /* XXX call done */ } /* Close a device bulk pipe. */ void ohci_device_bulk_close(pipe) usbd_pipe_handle pipe; { struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; usbd_device_handle dev = opipe->pipe.device; ohci_softc_t *sc = (ohci_softc_t *)dev->bus; int s; s = splusb(); ohci_rem_ed(opipe->sed, sc->sc_bulk_head); splx(s); ohci_free_std(sc, opipe->tail); ohci_free_sed(sc, opipe->sed); /* XXX free other resources */ } /************************/ usbd_status ohci_device_intr_transfer(reqh) usbd_request_handle reqh; { int s; usbd_status r; s = splusb(); r = usb_insert_transfer(reqh); splx(s); if (r != USBD_NORMAL_COMPLETION) return (r); else return (ohci_device_intr_start(reqh)); } usbd_status ohci_device_intr_start(reqh) usbd_request_handle reqh; { struct ohci_pipe *opipe = (struct ohci_pipe *)reqh->pipe; usbd_device_handle dev = opipe->pipe.device; ohci_softc_t *sc = (ohci_softc_t *)dev->bus; ohci_soft_ed_t *sed = opipe->sed; ohci_soft_td_t *xfer, *tail; usb_dma_t *dmap; usbd_status r; int len; int s; DPRINTFN(3, ("ohci_device_intr_transfer: reqh=%p buf=%p len=%d " "flags=%d priv=%p\n", reqh, reqh->buffer, reqh->length, reqh->flags, reqh->priv)); if (reqh->isreq) panic("ohci_device_intr_transfer: a request\n"); len = reqh->length; dmap = &opipe->u.intr.datadma; if (len == 0) return (USBD_INVAL); /* XXX should it be? */ xfer = opipe->tail; tail = ohci_alloc_std(sc); if (!tail) { r = USBD_NOMEM; goto ret1; } tail->reqh = 0; r = usb_allocmem(sc->sc_dmatag, len, 0, dmap); if (r != USBD_NORMAL_COMPLETION) goto ret2; xfer->td->td_flags = LE( OHCI_TD_IN | OHCI_TD_NOCC | OHCI_TD_SET_DI(1) | OHCI_TD_TOGGLE_CARRY); if (reqh->flags & USBD_SHORT_XFER_OK) xfer->td->td_flags |= LE(OHCI_TD_R); xfer->td->td_cbp = LE(DMAADDR(dmap)); xfer->nexttd = tail; xfer->td->td_nexttd = LE(tail->physaddr); xfer->td->td_be = LE(LE(xfer->td->td_cbp) + len - 1); xfer->len = len; xfer->reqh = reqh; reqh->hcpriv = xfer; #if USB_DEBUG if (ohcidebug > 5) { printf("ohci_device_intr_transfer:\n"); ohci_dump_ed(sed); ohci_dump_tds(xfer); } #endif /* Insert ED in schedule */ s = splusb(); ohci_hash_add_td(sc, xfer); sed->ed->ed_tailp = LE(tail->physaddr); opipe->tail = tail; #if 0 if (reqh->timeout && !sc->sc_bus.use_polling) { usb_timeout(ohci_timeout, reqh, MS_TO_TICKS(reqh->timeout), reqh->timo_handle); } #endif sed->ed->ed_flags &= LE(~OHCI_ED_SKIP); splx(s); #ifdef USB_DEBUG if (ohcidebug > 5) { delay(5000); printf("ohci_device_intr_transfer: status=%x\n", OREAD4(sc, OHCI_COMMAND_STATUS)); ohci_dump_ed(sed); ohci_dump_tds(xfer); } #endif return (USBD_IN_PROGRESS); ret2: ohci_free_std(sc, xfer); ret1: return (r); } /* Abort a device control request. */ void ohci_device_intr_abort(reqh) usbd_request_handle reqh; { /* XXX inactivate */ usb_delay_ms(reqh->pipe->device->bus, 1); /* make sure it is done */ if (reqh->pipe->intrreqh == reqh) { DPRINTF(("ohci_device_intr_abort: remove\n")); reqh->pipe->intrreqh = 0; ohci_intr_done((ohci_softc_t *)reqh->pipe->device->bus, reqh); } } /* Close a device interrupt pipe. */ void ohci_device_intr_close(pipe) usbd_pipe_handle pipe; { struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; int nslots = opipe->u.intr.nslots; int pos = opipe->u.intr.pos; int j; ohci_soft_ed_t *p, *sed = opipe->sed; int s; DPRINTFN(1,("ohci_device_intr_close: pipe=%p nslots=%d pos=%d\n", pipe, nslots, pos)); s = splusb(); sed->ed->ed_flags |= LE(OHCI_ED_SKIP); if ((sed->ed->ed_tailp & LE(OHCI_TAILMASK)) != sed->ed->ed_headp) usb_delay_ms(&sc->sc_bus, 2); for (p = sc->sc_eds[pos]; p && p->next != sed; p = p->next) ; if (!p) panic("ohci_device_intr_close: ED not found\n"); p->next = sed->next; p->ed->ed_nexted = sed->ed->ed_nexted; splx(s); for (j = 0; j < nslots; j++) --sc->sc_bws[pos * nslots + j]; ohci_free_std(sc, opipe->tail); ohci_free_sed(sc, opipe->sed); /* XXX free other resources */ } usbd_status ohci_device_setintr(sc, opipe, ival) ohci_softc_t *sc; struct ohci_pipe *opipe; int ival; { int i, j, s, best; u_int npoll, slow, shigh, nslots; u_int bestbw, bw; ohci_soft_ed_t *hsed, *sed = opipe->sed; DPRINTFN(2, ("ohci_setintr: pipe=%p\n", opipe)); if (ival == 0) { printf("ohci_setintr: 0 interval\n"); return (USBD_INVAL); } npoll = OHCI_NO_INTRS; while (npoll > ival) npoll /= 2; DPRINTFN(2, ("ohci_setintr: ival=%d npoll=%d\n", ival, npoll)); /* * We now know which level in the tree the ED must go into. * Figure out which slot has most bandwidth left over. * Slots to examine: * npoll * 1 0 * 2 1 2 * 4 3 4 5 6 * 8 7 8 9 10 11 12 13 14 * N (N-1) .. (N-1+N-1) */ slow = npoll-1; shigh = slow + npoll; nslots = OHCI_NO_INTRS / npoll; for (best = i = slow, bestbw = ~0; i < shigh; i++) { bw = 0; for (j = 0; j < nslots; j++) bw += sc->sc_bws[i * nslots + j]; if (bw < bestbw) { best = i; bestbw = bw; } } DPRINTFN(2, ("ohci_setintr: best=%d(%d..%d) bestbw=%d\n", best, slow, shigh, bestbw)); s = splusb(); hsed = sc->sc_eds[best]; sed->next = hsed->next; sed->ed->ed_nexted = hsed->ed->ed_nexted; hsed->next = sed; hsed->ed->ed_nexted = LE(sed->physaddr); splx(s); for (j = 0; j < nslots; j++) ++sc->sc_bws[best * nslots + j]; opipe->u.intr.nslots = nslots; opipe->u.intr.pos = best; DPRINTFN(5, ("ohci_setintr: returns %p\n", opipe)); return (USBD_NORMAL_COMPLETION); }