#-*- mode: Fundamental; tab-width: 4; -*- # ex:ts=4 # # $Id: bsd.port.mk,v 1.260 1997/06/24 07:16:21 asami Exp $ # $NetBSD: $ # # bsd.port.mk - 940820 Jordan K. Hubbard. # This file is in the public domain. # # Please view me with 4 column tabs! # There are two different types of "maintainers" in the whole ports # framework concept. Maintainers of the bsd.port*.mk files # are listed below in the ${OSNAME}_MAINTAINER entries (this file # is used by multiple *BSD flavors). You should consult them directly # if you have any questions/suggestions regarding this file since only # they are allowed to modify the master copies in the CVS repository! # For each port, the MAINTAINER variable is what you should consult for # contact information on the person(s) to contact if you have questions/ # suggestions about that specific port. By default (if no MAINTAINER # is listed), a port is maintained by the subscribers of the ports@freebsd.org # mailing list, and any correspondece should be directed there. # FreeBSD_MAINTAINER= asami@FreeBSD.ORG OpenBSD_MAINTAINER= imp@OpenBSD.ORG # Supported Variables and their behaviors: # # Variables that typically apply to all ports: # # OPSYS - Portability clause. This is the operating system the # makefile is being used on. Automatically set to # "FreeBSD," "NetBSD," or "OpenBSD" as appropriate. # PORTSDIR - The root of the ports tree. Defaults: # FreeBSD/OpenBSD: /usr/ports # NetBSD: /usr/opt # DISTDIR - Where to get gzip'd, tarballed copies of original sources # (default: ${PORTSDIR}/distfiles). # PREFIX - Where to install things in general (default: /usr/local). # MASTER_SITES - Primary location(s) for distribution files if not found # locally. # PATCH_SITES - Primary location(s) for distribution patch files # (see PATCHFILES below) if not found locally. # # MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch # files if not found locally and ${MASTER_SITES}/${PATCH_SITES} # (default: # ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/) # MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this # value. # MASTER_SITE_FREEBSD - If set, only use ${MASTER_SITE_BACKUP} for # MASTER_SITES. # PACKAGES - A top level directory where all packages go (rather than # going locally to each port). (default: ${PORTSDIR}/packages). # GMAKE - Set to path of GNU make if not in $PATH (default: gmake). # XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ). # MAINTAINER - The e-mail address of the contact person for this port # (default: ports@FreeBSD.ORG). # CATEGORIES - A list of descriptive categories into which this port falls. # # Variables that typically apply to an individual port. Non-Boolean # variables without defaults are *mandatory*. # # WRKDIR - A temporary working directory that gets *clobbered* on clean # (default: ${.CURDIR}/work). # WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually # unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless # NO_WRKSUBDIR is set, in which case simply ${WRKDIR}). # DISTNAME - Name of port or distribution. # DISTFILES - Name(s) of archive file(s) containing distribution # (default: ${DISTNAME}${EXTRACT_SUFX}). # PATCHFILES - Name(s) of additional files that contain distribution # patches (default: none). make will look for them at # PATCH_SITES (see above). They will automatically be # uncompressed before patching if the names end with # ".gz" or ".Z". # DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES} # and ${PATCHFILES} will be put in this subdirectory of # ${DISTDIR}. Also they will be fetched in this subdirectory # from FreeBSD mirror sites. # ALLFILES - All of ${DISTFILES} and ${PATCHFILES}. # IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set # this variable to their names. # PKGNAME - Name of the package file to create if the DISTNAME # isn't really relevant for the port/package # (default: ${DISTNAME}). # EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to # actually extract. # PATCHDIR - A directory containing any additional patches you made # to port this software to FreeBSD (default: # ${.CURDIR}/patches) # SCRIPTDIR - A directory containing any auxiliary scripts # (default: ${.CURDIR}/scripts) # FILESDIR - A directory containing any miscellaneous additional files. # (default: ${.CURDIR}/files) # PKGDIR - A direction containing any package creation files. # (default: ${.CURDIR}/pkg) # PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg) # FORCE_PKG_REGISTER - If set, it will overwrite any existing package # registration information in ${PKG_DBDIR}/${PKGNAME}. # NO_MTREE - If set, will not invoke mtree from bsd.port.mk from # the "install" target. # MTREE_FILE - The name of the mtree file (default: /etc/mtree/BSD.x11.dist # if USE_IMAKE or USE_X11 is set, /etc/mtree/BSD.local.dist # otherwise.) # # NO_BUILD - Use a dummy (do-nothing) build target. # NO_CONFIGURE - Use a dummy (do-nothing) configure target. # NO_CDROM - Port may not go on CDROM. Set this string to reason. # NO_DESCRIBE - Use a dummy (do-nothing) describe target. # NO_EXTRACT - Use a dummy (do-nothing) extract target. # NO_INSTALL - Use a dummy (do-nothing) install target. # NO_PACKAGE - Use a dummy (do-nothing) package target. # NO_PKG_REGISTER - Don't register a port install as a package. # NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}. # NO_WRKDIR - There's no work directory at all; port does this someplace # else. # NO_DEPENDS - Don't verify build of dependencies. # BROKEN - Port is broken. Set this string to the reason why. # RESTRICTED - Port is restricted. Set this string to the reason why. # USE_GMAKE - Says that the port uses gmake. # USE_PERL5 - Says that the port uses perl5 for building and running. # USE_IMAKE - Says that the port uses imake. # USE_X11 - Says that the port uses X11 (i.e., installs in ${X11BASE}). # NO_INSTALL_MANPAGES - For imake ports that don't like the install.man # target. # HAS_CONFIGURE - Says that the port has its own configure script. # GNU_CONFIGURE - Set if you are using GNU configure (optional). # CONFIGURE_SCRIPT - Name of configure script, defaults to 'configure'. # CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set. # CONFIGURE_ENV - Pass these env (shell-like) to configure if # ${HAS_CONFIGURE} is set. # SCRIPTS_ENV - Additional environment vars passed to scripts in # ${SCRIPTDIR} executed by bsd.port.mk. # MAKE_ENV - Additional environment vars passed to sub-make in build # stage. # IS_INTERACTIVE - Set this if your port needs to interact with the user # during a build. User can then decide to skip this port by # setting ${BATCH}, or compiling only the interactive ports # by setting ${INTERACTIVE}. # FETCH_DEPENDS - A list of "path:dir" pairs of other ports this # package depends in the "fetch" stage. "path" is the # name of a file if it starts with a slash (/), an # executable otherwise. make will test for the # existence (if it is a full pathname) or search for # it in your $PATH (if it is an executable) and go # into "dir" to do a "make all install" if it's not # found. # BUILD_DEPENDS - A list of "path:dir" pairs of other ports this # package depends to build (between the "extract" and # "build" stages, inclusive). The test done to # determine the existence of the dependency is the # same as FETCH_DEPENDS. # RUN_DEPENDS - A list of "path:dir" pairs of other ports this # package depends to run. The test done to determine # the existence of the dependency is the same as # FETCH_DEPENDS. This will be checked during the # "install" stage and the name of the dependency will # be put into the package as well. # LIB_DEPENDS - A list of "lib:dir" pairs of other ports this package # depends on. "lib" is the name of a shared library. # make will use "ldconfig -r" to search for the # library. Note that lib can be any regular expression, # and you need two backslashes in front of dots (.) to # supress its special meaning (e.g., use # "foo\\.2\\.:${PORTSDIR}/utils/foo" to match "libfoo.2.*"). # DEPENDS - A list of other ports this package depends on being # made first. Use this for things that don't fall into # the above two categories. # EXTRACT_CMD - Command for extracting archive (default: tar). # EXTRACT_SUFX - Suffix for archive names (default: .tar.gz). # EXTRACT_BEFORE_ARGS - # Arguments to ${EXTRACT_CMD} before filename # (default: -xzf). # EXTRACT_AFTER_ARGS - # Arguments to ${EXTRACT_CMD} following filename # (default: none). # # FETCH_CMD - Full path to ftp/http fetch command if not in $PATH # (default: /usr/bin/fetch). # FETCH_BEFORE_ARGS - # Arguments to ${FETCH_CMD} before filename (default: none). # FETCH_AFTER_ARGS - # Arguments to ${FETCH_CMD} following filename (default: none). # # Motif support: # # REQUIRES_MOTIF - Set this in your port if it requires Motif. It will be # built only if HAVE_MOTIF is set. # HAVE_MOTIF - If set, means system has Motif. Typically set in # /etc/make.conf. # MOTIF_STATIC - If set, link libXm statically; otherwise, link it # dynamically. Typically set in /etc/make.conf. # MOTIFLIB - Set automatically to appropriate value depending on # ${MOTIF_STATIC}. Substitute references to -lXm with # patches to make your port conform to our standards. # MOTIF_ONLY - If set, build Motif ports only. (Not much use except for # building packages.) # # Variables to change if you want a special behavior: # # ECHO_MSG - Used to print all the '===>' style prompts - override this # to turn them off (default: /bin/echo). # DEPENDS_TARGET - The target to execute when a port is calling a # dependency (default: "install"). # PATCH_DEBUG - If set, print out more information about the patches as # it attempts to apply them. # # Variables that serve as convenient "aliases" for your *-install targets. # Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin". # # INSTALL_PROGRAM - A command to install binary executables. # INSTALL_SCRIPT - A command to install executable scripts. # INSTALL_DATA - A command to install sharable data. # INSTALL_MAN - A command to install manpages (doesn't compress). # # If your port doesn't automatically compress manpages, set the following. # Depending on the setting of NOMANCOMPRESS, the make rules will compress # the manpages for you. # # MAN - A list of manpages, categorized by section. For # example, if your port has "man/man1/foo.1" and # "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n". # The available sections chars are "123456789LN". # MANPREFIX - The directory prefix for ${MAN} (default: ${PREFIX}). # # Default targets and their behaviors: # # fetch - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined) # into ${DISTDIR} as necessary. # fetch-list - Show list of files that would be retrieved by fetch # extract - Unpacks ${DISTFILES} into ${WRKDIR}. # patch - Apply any provided patches to the source. # configure - Runs either GNU configure, one or more local configure # scripts or nothing, depending on what's available. # build - Actually compile the sources. # install - Install the results of a build. # reinstall - Install the results of a build, ignoring "already installed" # flag. # package - Create a package from an _installed_ port. # describe - Try to generate a one-line description for each port for # use in INDEX files and the like. # checkpatch - Do a "patch -C" instead of a "patch". Note that it may # give incorrect results if multiple patches deal with # the same file. # checksum - Use files/md5 to ensure that your distfiles are valid. # makesum - Generate files/md5 (only do this for your own ports!). # # Default sequence for "all" is: fetch checksum extract patch configure build # # Please read the comments in the targets section below, you # should be able to use the pre-* or post-* targets/scripts # (which are available for every stage except checksum) or # override the do-* targets to do pretty much anything you want. # # NEVER override the "regular" targets unless you want to open # a major can of worms. # Get the operating system type OPSYS!= uname -s .if exists(${.CURDIR}/../Makefile.inc) .include "${.CURDIR}/../Makefile.inc" .endif # These need to be absolute since we don't know how deep in the ports # tree we are and thus can't go relative. They can, of course, be overridden # by individual Makefiles or local system make configuration. .if (${OPSYS} == "NetBSD") PORTSDIR?= /usr/opt .else PORTSDIR?= /usr/ports .endif LOCALBASE?= ${DESTDIR}/usr/local X11BASE?= ${DESTDIR}/usr/X11R6 DISTDIR?= ${PORTSDIR}/distfiles _DISTDIR?= ${DISTDIR}/${DIST_SUBDIR} PACKAGES?= ${PORTSDIR}/packages TEMPLATES?= ${PORTSDIR}/templates .if !defined(NO_WRKDIR) WRKDIR?= ${.CURDIR}/work .else WRKDIR?= ${.CURDIR} .endif .if defined(NO_WRKSUBDIR) WRKSRC?= ${WRKDIR} .else WRKSRC?= ${WRKDIR}/${DISTNAME} .endif PATCHDIR?= ${.CURDIR}/patches SCRIPTDIR?= ${.CURDIR}/scripts FILESDIR?= ${.CURDIR}/files PKGDIR?= ${.CURDIR}/pkg .if defined(USE_IMAKE) || defined(USE_X11) PREFIX?= ${X11BASE} .else PREFIX?= ${LOCALBASE} .endif # The following 4 lines should go away as soon as the ports are all updated .if defined(EXEC_DEPENDS) BUILD_DEPENDS+= ${EXEC_DEPENDS} RUN_DEPENDS+= ${EXEC_DEPENDS} .endif .if defined(USE_GMAKE) BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake .endif .if defined(USE_PERL5) BUILD_DEPENDS+= perl5.004:${PORTSDIR}/lang/perl5 RUN_DEPENDS+= perl5.004:${PORTSDIR}/lang/perl5 .endif .if exists(${PORTSDIR}/../Makefile.inc) .include "${PORTSDIR}/../Makefile.inc" .endif # Don't change these!!! These names are built into the _TARGET_USE macro, # there is no way to refer to them cleanly from within the macro AFAIK. EXTRACT_COOKIE?= ${WRKDIR}/.extract_done CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done INSTALL_COOKIE?= ${WRKDIR}/.install_done BUILD_COOKIE?= ${WRKDIR}/.build_done PATCH_COOKIE?= ${WRKDIR}/.patch_done PACKAGE_COOKIE?= ${WRKDIR}/.package_done # How to do nothing. Override if you, for some strange reason, would rather # do something. DO_NADA?= /usr/bin/true # Miscellaneous overridable commands: GMAKE?= gmake XMKMF?= xmkmf -a .if exists(/sbin/md5) MD5?= /sbin/md5 .elif exists(/bin/md5) MD5?= /bin/md5 .elif exists(/usr/bin/md5) MD5?= /usr/bin/md5 .else MD5?= md5 .endif MD5_FILE?= ${FILESDIR}/md5 MAKE_FLAGS?= -f MAKEFILE?= Makefile MAKE_ENV+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}" .if exists(/usr/bin/fetch) FETCH_CMD?= /usr/bin/fetch .else FETCH_CMD?= /usr/bin/ftp .endif TOUCH?= /usr/bin/touch TOUCH_FLAGS?= -f PATCH?= /usr/bin/patch PATCH_STRIP?= -p0 PATCH_DIST_STRIP?= -p0 .if defined(PATCH_DEBUG) PATCH_DEBUG_TMP= yes PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP} PATCH_DIST_ARGS?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP} .else PATCH_DEBUG_TMP= no PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP} PATCH_DIST_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP} .endif .if defined(BATCH) PATCH_ARGS+= --batch PATCH_DIST_ARGS+= --batch .endif .if defined(PATCH_CHECK_ONLY) PATCH_ARGS+= -C PATCH_DIST_ARGS+= -C .endif .if exists(/bin/tar) EXTRACT_CMD?= /bin/tar .else EXTRACT_CMD?= /usr/bin/tar .endif EXTRACT_SUFX?= .tar.gz # Backwards compatability. .if defined(EXTRACT_ARGS) EXTRACT_BEFORE_ARGS?= ${EXTRACT_ARGS} .else EXTRACT_BEFORE_ARGS?= -xzf .endif # Figure out where the local mtree file is .if !defined(MTREE_FILE) .if defined(USE_IMAKE) || defined(USE_X11) MTREE_FILE= /etc/mtree/BSD.x11.dist .else MTREE_FILE= /etc/mtree/BSD.local.dist .endif .endif MTREE_CMD?= /usr/sbin/mtree MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -p # A few aliases for *-install targets INSTALL_PROGRAM= \ ${INSTALL} ${COPY} ${STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} INSTALL_SCRIPT= \ ${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} INSTALL_DATA= \ ${INSTALL} ${COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE} INSTALL_MAN= \ ${INSTALL} ${COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE} INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ BSD_INSTALL_DATA="${INSTALL_DATA}" \ BSD_INSTALL_MAN="${INSTALL_MAN}" MAKE_ENV+= ${INSTALL_MACROS} SCRIPTS_ENV+= ${INSTALL_MACROS} # The user can override the NO_PACKAGE by specifying this from # the make command line .if defined(FORCE_PACKAGE) .undef NO_PACKAGE .endif COMMENT?= ${PKGDIR}/COMMENT DESCR?= ${PKGDIR}/DESCR PLIST?= ${PKGDIR}/PLIST PKG_CMD?= /usr/sbin/pkg_create .if !defined(PKG_ARGS) PKG_ARGS= -v -c ${COMMENT} -d ${DESCR} -f ${PLIST} -p ${PREFIX} -P "`${MAKE} package-depends|sort -u`" .if exists(${PKGDIR}/INSTALL) PKG_ARGS+= -i ${PKGDIR}/INSTALL .endif .if exists(${PKGDIR}/DEINSTALL) PKG_ARGS+= -k ${PKGDIR}/DEINSTALL .endif .if exists(${PKGDIR}/REQ) PKG_ARGS+= -r ${PKGDIR}/REQ .endif .if exists(${PKGDIR}/MESSAGE) PKG_ARGS+= -D ${PKGDIR}/MESSAGE .endif .if !defined(NO_MTREE) PKG_ARGS+= -m ${MTREE_FILE} .endif .endif PKG_SUFX?= .tgz # where pkg_add records its dirty deeds. PKG_DBDIR?= /var/db/pkg # shared/dynamic motif libs .if defined(HAVE_MOTIF) .if defined(MOTIF_STATIC) MOTIFLIB?= ${X11BASE}/lib/libXm.a .else MOTIFLIB?= -L${X11BASE}/lib -lXm .endif .endif AWK?= /usr/bin/awk BASENAME?= /usr/bin/basename CAT?= /bin/cat CP?= /bin/cp ECHO?= /bin/echo FALSE?= /usr/bin/false GREP?= /usr/bin/grep GUNZIP_CMD?= /usr/bin/gunzip -f GZCAT?= /usr/bin/gzcat GZIP?= -9 GZIP_CMD?= /usr/bin/gzip -nf ${GZIP} LDCONFIG?= /sbin/ldconfig MKDIR?= /bin/mkdir -p MV?= /bin/mv RM?= /bin/rm RMDIR?= /bin/rmdir SED?= /usr/bin/sed SETENV?= /usr/bin/env TR?= /usr/bin/tr # Used to print all the '===>' style prompts - override this to turn them off. ECHO_MSG?= ${ECHO} ALL_TARGET?= all INSTALL_TARGET?= install # Popular master sites MASTER_SITE_XCONTRIB+= \ ftp://crl.dec.com/pub/X11/contrib/%SUBDIR%/ \ ftp://ftp.eu.net/X11/contrib/%SUBDIR%/ MASTER_SITE_GNU+= \ ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ \ ftp://wuarchive.wustl.edu/systems/gnu/%SUBDIR%/ MASTER_SITE_PERL_CPAN+= \ ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ \ ftp://ftp.cdrom.com/pub/perl/CPAN/modules/by-module/%SUBDIR%/ MASTER_SITE_TEX_CTAN+= \ ftp://ftp.cdrom.com/pub/tex/ctan/%SUBDIR%/ \ ftp://wuarchive.wustl.edu/packages/TeX/%SUBDIR%/ \ ftp://ftp.funet.fi/pub/TeX/CTAN/%SUBDIR%/ \ ftp://ftp.tex.ac.uk/public/ctan/tex-archive/%SUBDIR%/ \ ftp://ftp.dante.de/tex-archive/%SUBDIR%/ MASTER_SITE_SUNSITE+= \ ftp://sunsite.unc.edu/pub/Linux/%SUBDIR%/ \ ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/%SUBDIR%/ \ ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/%SUBDIR%/ # Empty declaration to avoid "variable MASTER_SITES recursive" error MASTER_SITES?= PATCH_SITES?= # Substitute subdirectory names MASTER_SITES:= ${MASTER_SITES:S/%SUBDIR%/${MASTER_SITE_SUBDIR}/} PATCH_SITES:= ${PATCH_SITES:S/%SUBDIR%/${PATCH_SITE_SUBDIR}/} # The primary backup site. MASTER_SITE_BACKUP?= \ ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/ # If the user has this set, go to the FreeBSD repository for everything. .if defined(MASTER_SITE_FREEBSD) MASTER_SITE_OVERRIDE= ${MASTER_SITE_BACKUP} .endif # Where to put distfiles that don't have any other master site MASTER_SITE_LOCAL?= \ ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/LOCAL_PORTS/ # I guess we're in the master distribution business! :) As we gain mirror # sites for distfiles, add them to this list. .if !defined(MASTER_SITE_OVERRIDE) MASTER_SITES+= ${MASTER_SITE_BACKUP} PATCH_SITES+= ${MASTER_SITE_BACKUP} .else MASTER_SITES:= ${MASTER_SITE_OVERRIDE} ${MASTER_SITES} PATCH_SITES:= ${MASTER_SITE_OVERRIDE} ${PATCH_SITES} .endif # Search CDROM first if mounted, symlink instead of copy if # FETCH_SYMLINK_DISTFILES is set .if exists(/cdrom/ports/distfiles) MASTER_SITES:= file:/cdrom/ports/distfiles/${DIST_SUBDIR}/ ${MASTER_SITES} PATCH_SITES:= file:/cdrom/ports/distfiles/${DIST_SUBDIR}/ ${PATCH_SITES} .if defined(FETCH_SYMLINK_DISTFILES) FETCH_BEFORE_ARGS+= -l .endif .endif # Derived names so that they're easily overridable. DISTFILES?= ${DISTNAME}${EXTRACT_SUFX} PKGNAME?= ${DISTNAME} ALLFILES?= ${DISTFILES} ${PATCHFILES} .if defined(IGNOREFILES) CKSUMFILES!= \ for file in ${ALLFILES}; do \ ignore=0; \ for tmp in ${IGNOREFILES}; do \ if [ "$$file" = "$$tmp" ]; then \ ignore=1; \ fi; \ done; \ if [ "$$ignore" = 0 ]; then \ echo "$$file"; \ fi; \ done .else CKSUMFILES= ${ALLFILES} .endif # List of all files, with ${DIST_SUBDIR} in front. Used for checksum. .if defined(DIST_SUBDIR) _CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//} _IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//} .else _CKSUMFILES?= ${CKSUMFILES} _IGNOREFILES?= ${IGNOREFILES} .endif # This is what is actually going to be extracted, and is overridable # by user. EXTRACT_ONLY?= ${DISTFILES} # Documentation MAINTAINER?= ports@FreeBSD.ORG .if !defined(CATEGORIES) .BEGIN: @${ECHO_MSG} "CATEGORIES is mandatory." @${FALSE} .endif # Note this has to start with a capital letter (or more accurately, it # shouldn't match "[a-z]*"), see the target "delete-package-links" below. PKGREPOSITORYSUBDIR?= All PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR} .if exists(${PACKAGES}) PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX} .else PKGFILE?= ${PKGNAME}${PKG_SUFX} .endif CONFIGURE_SCRIPT?= configure .if defined(GNU_CONFIGURE) CONFIGURE_ARGS+= --prefix=${PREFIX} HAS_CONFIGURE= yes .endif # Passed to most of script invocations SCRIPTS_ENV+= CURDIR=${.CURDIR} DISTDIR=${DISTDIR} \ WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \ SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \ PORTSDIR=${PORTSDIR} DEPENDS="${DEPENDS}" \ PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} .if defined(BATCH) SCRIPTS_ENV+= BATCH=yes .endif MANPREFIX?= ${PREFIX} .for sect in 1 2 3 4 5 6 7 8 9 MAN${sect}PREFIX?= ${MANPREFIX} .endfor MANLPREFIX?= ${MANPREFIX} MANNPREFIX?= ${MANPREFIX} MANLANG?= "" # english only by default .for lang in ${MANLANG} .for sect in 1 2 3 4 5 6 7 8 9 .if defined(MAN${sect}) _MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/man/${lang}/man${sect}/%} .endif .endfor .if defined(MANL) _MANPAGES+= ${MANL:S%^%${MANLPREFIX}/man/${lang}/manl/%} .endif .if defined(MANN) _MANPAGES+= ${MANN:S%^%${MANNPREFIX}/man/${lang}/mann/%} .endif .endfor .if defined(_MANPAGES) && defined(MANCOMPRESSED) _MANPAGES:= ${_MANPAGES:S/$/.gz/} .endif .MAIN: all ################################################################ # Many ways to disable a port. # # If we're in BATCH mode and the port is interactive, or we're # in interactive mode and the port is non-interactive, skip all # the important targets. The reason we have two modes is that # one might want to leave a build in BATCH mode running # overnight, then come back in the morning and do _only_ the # interactive ones that required your intervention. # # Don't attempt to build ports that require Motif if you don't # have Motif. # # Ignore ports that can't be resold if building for a CDROM. # # Don't build a port if it's restricted and we don't want to get # into that. # # Don't build a port if it's broken. ################################################################ .if !defined(NO_IGNORE) .if (defined(IS_INTERACTIVE) && defined(BATCH)) IGNORE= "is an interactive port" .elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE)) IGNORE= "is not an interactive port" .elif (defined(REQUIRES_MOTIF) && !defined(HAVE_MOTIF)) IGNORE= "requires Motif" .elif (defined(MOTIF_ONLY) && !defined(REQUIRES_MOTIF)) IGNORE= "does not require Motif" .elif (defined(NO_CDROM) && defined(FOR_CDROM)) IGNORE= "may not be placed on a CDROM: ${NO_CDROM}" .elif (defined(RESTRICTED) && defined(NO_RESTRICTED)) IGNORE= "is restricted: ${RESTRICTED}" .elif ((defined(USE_IMAKE) || defined(USE_X11)) && !exists(${X11BASE})) IGNORE= "uses X11, but ${X11BASE} not found" .elif defined(BROKEN) IGNORE= "is marked as broken: ${BROKEN}" .endif .if defined(IGNORE) .if defined(IGNORE_SILENT) IGNORECMD= ${DO_NADA} .else IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} ${IGNORE}." .endif fetch: @${IGNORECMD} checksum: @${IGNORECMD} extract: @${IGNORECMD} patch: @${IGNORECMD} configure: @${IGNORECMD} all: @${IGNORECMD} build: @${IGNORECMD} install: @${IGNORECMD} package: @${IGNORECMD} .endif .endif .if defined(ALL_HOOK) all: @cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \ DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \ PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \ FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \ DEPENDS="${DEPENDS}" BUILD_DEPENDS="${BUILD_DEPENDS}" \ RUN_DEPENDS="${RUN_DEPENDS}" X11BASE=${X11BASE} \ ${ALL_HOOK} .endif .if !target(all) all: build .endif .if !defined(DEPENDS_TARGET) DEPENDS_TARGET= install .endif ################################################################ # The following are used to create easy dummy targets for # disabling some bit of default target behavior you don't want. # They still check to see if the target exists, and if so don't # do anything, since you might want to set this globally for a # group of ports in a Makefile.inc, but still be able to # override from an individual Makefile. ################################################################ # Disable checksum .if defined(NO_CHECKSUM) && !target(checksum) checksum: fetch @${DO_NADA} .endif # Disable extract .if defined(NO_EXTRACT) && !target(extract) extract: checksum @${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE} checksum: fetch @${DO_NADA} makesum: @${DO_NADA} .endif # Disable patch .if defined(NO_PATCH) && !target(patch) patch: extract @${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE} .endif # Disable configure .if defined(NO_CONFIGURE) && !target(configure) configure: patch @${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE} .endif # Disable build .if defined(NO_BUILD) && !target(build) build: configure @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE} .endif # Disable install .if defined(NO_INSTALL) && !target(install) install: build @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE} .endif # Disable package .if defined(NO_PACKAGE) && !target(package) package: .if defined(IGNORE_SILENT) @${DO_NADA} .else @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: ${NO_PACKAGE}." .endif .endif # Disable describe .if defined(NO_DESCRIBE) && !target(describe) describe: @${DO_NADA} .endif ################################################################ # More standard targets start here. # # These are the body of the build/install framework. If you are # not happy with the default actions, and you can't solve it by # adding pre-* or post-* targets/scripts, override these. ################################################################ # Fetch .if !target(do-fetch) do-fetch: @${MKDIR} ${_DISTDIR} @(cd ${_DISTDIR}; \ for file in ${DISTFILES}; do \ if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ if [ -h $$file -o -h `${BASENAME} $$file` ]; then \ ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \ ${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \ ${ECHO_MSG} ">> Please correct this problem and try again."; \ exit 1; \ fi ; \ ${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \ for site in ${MASTER_SITES}; do \ ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \ if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \ continue 2; \ fi \ done; \ ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\ ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \ exit 1; \ fi \ done) .if defined(PATCHFILES) @(cd ${_DISTDIR}; \ for file in ${PATCHFILES}; do \ if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ if [ -h $$file -o -h `${BASENAME} $$file` ]; then \ ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \ ${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \ ${ECHO_MSG} ">> Please correct this problem and try again."; \ exit 1; \ fi ; \ ${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \ for site in ${PATCH_SITES}; do \ ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \ if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \ continue 2; \ fi \ done; \ ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\ ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \ exit 1; \ fi \ done) .endif .endif # Extract .if !target(do-extract) do-extract: .if !defined(NO_WRKDIR) @${RM} -rf ${WRKDIR} @${MKDIR} ${WRKDIR} .endif @for file in ${EXTRACT_ONLY}; do \ if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\ then \ exit 1; \ fi \ done .endif # Patch .if !target(do-patch) do-patch: .if defined(PATCHFILES) @${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}" @(cd ${_DISTDIR}; \ for i in ${PATCHFILES}; do \ if [ ${PATCH_DEBUG_TMP} = yes ]; then \ ${ECHO_MSG} "===> Applying distribution patch $$i" ; \ fi; \ case $$i in \ *.Z|*.gz) \ ${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \ ;; \ *) \ ${PATCH} ${PATCH_DIST_ARGS} < $$i; \ ;; \ esac; \ done) .endif @if [ -d ${PATCHDIR} ]; then \ if [ "`echo ${PATCHDIR}/patch-*`" = "${PATCHDIR}/patch-*" ]; then \ ${ECHO_MSG} "===> Ignoring empty patch directory"; \ if [ -d ${PATCHDIR}/CVS ]; then \ ${ECHO_MSG} "===> Perhaps you forgot the -P flag to cvs co or update?"; \ fi; \ else \ ${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \ for i in ${PATCHDIR}/patch-*; do \ case $$i in \ *.orig|*.rej|*~) \ ${ECHO_MSG} "===> Ignoring patchfile $$i" ; \ ;; \ *) \ if [ ${PATCH_DEBUG_TMP} = yes ]; then \ ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \ fi; \ ${PATCH} ${PATCH_ARGS} < $$i; \ ;; \ esac; \ done; \ fi; \ fi .endif # Configure .if !target(do-configure) do-configure: @if [ -f ${SCRIPTDIR}/configure ]; then \ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} /bin/sh \ ${SCRIPTDIR}/configure; \ fi .if defined(HAS_CONFIGURE) @(cd ${WRKSRC} && CC="${CC}" ac_cv_path_CC="${CC}" CFLAGS="${CFLAGS}" \ INSTALL="/usr/bin/install -c -o ${BINOWN} -g ${BINGRP}" \ INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ ${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}) .endif .if defined(USE_IMAKE) @(cd ${WRKSRC} && ${XMKMF}) .endif .endif # Build .if !target(do-build) do-build: .if defined(USE_GMAKE) @(cd ${WRKSRC}; ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET}) .else defined(USE_GMAKE) @(cd ${WRKSRC}; ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET}) .endif .endif # Install .if !target(do-install) do-install: .if defined(USE_GMAKE) @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET}) .if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES) @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} install.man) .endif .else defined(USE_GMAKE) @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET}) .if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES) @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} install.man) .endif .endif .endif # Package .if !target(do-package) do-package: @if [ -e ${PLIST} ]; then \ ${ECHO_MSG} "===> Building package for ${PKGNAME}"; \ if [ -d ${PACKAGES} ]; then \ if [ ! -d ${PKGREPOSITORY} ]; then \ if ! ${MKDIR} ${PKGREPOSITORY}; then \ ${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \ exit 1; \ fi; \ fi; \ fi; \ if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \ if [ -d ${PACKAGES} ]; then \ ${MAKE} ${.MAKEFLAGS} package-links; \ fi; \ else \ ${MAKE} ${.MAKEFLAGS} delete-package; \ exit 1; \ fi; \ fi .endif # Some support rules for do-package .if !target(package-links) package-links: @${MAKE} ${.MAKEFLAGS} delete-package-links @for cat in ${CATEGORIES}; do \ if [ ! -d ${PACKAGES}/$$cat ]; then \ if ! ${MKDIR} ${PACKAGES}/$$cat; then \ ${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \ exit 1; \ fi; \ fi; \ ln -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \ done; .endif .if !target(delete-package-links) delete-package-links: @${RM} -f ${PACKAGES}/[a-z]*/${PKGNAME}${PKG_SUFX}; .endif .if !target(delete-package) delete-package: @${MAKE} ${.MAKEFLAGS} delete-package-links @${RM} -f ${PKGFILE} .endif ################################################################ # This is the "generic" port target, actually a macro used from the # six main targets. See below for more. ################################################################ _PORT_USE: .USE .if make(real-fetch) @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends .endif .if make(real-extract) @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends lib-depends misc-depends .endif .if make(real-install) .if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER) @if [ -d ${PKG_DBDIR}/${PKGNAME} ]; then \ ${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \ ${ECHO_MSG} " If so, you may wish to \`\`pkg_delete ${PKGNAME}'' and install"; \ ${ECHO_MSG} " this port again by \`\`make reinstall'' to upgrade it properly."; \ ${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGNAME}"; \ ${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \ ${ECHO_MSG} " in your environment or the \"make install\" command line."; \ exit 1; \ fi .endif @if [ `/bin/sh -c umask` != 0022 ]; then \ ${ECHO_MSG} "===> Warning: your umask is \"`/bin/sh -c umask`"\".; \ ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \ ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \ fi @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends lib-depends .endif .if make(real-install) .if !defined(NO_MTREE) @if [ `id -u` = 0 ]; then \ ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/; \ else \ ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \ ${ECHO_MSG} "Become root and try again to ensure correct permissions."; \ fi .endif .endif @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/} @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} /bin/sh \ ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \ fi @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/} @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/} @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} /bin/sh \ ${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \ fi .if make(real-install) && defined(_MANPAGES) .if defined(MANCOMPRESSED) && defined(NOMANCOMPRESS) @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}" .for manpage in ${_MANPAGES} @${GUNZIP_CMD} ${manpage} .endfor .elif !defined(MANCOMPRESSED) && !defined(NOMANCOMPRESS) @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}" .for manpage in ${_MANPAGES} @${GZIP_CMD} ${manpage} .endfor .endif .endif .if make(real-install) && !defined(NO_PKG_REGISTER) @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fake-pkg .endif .if !make(real-fetch) \ && (!make(real-patch) || !defined(PATCH_CHECK_ONLY)) \ && (!make(real-package) || !defined(PACKAGE_NOINSTALL)) @${TOUCH} ${TOUCH_FLAGS} ${WRKDIR}/.${.TARGET:S/^real-//}_done .endif ################################################################ # Skeleton targets start here # # You shouldn't have to change these. Either add the pre-* or # post-* targets/scripts or redefine the do-* targets. These # targets don't do anything other than checking for cookies and # call the necessary targets/scripts. ################################################################ .if !target(fetch) fetch: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-fetch .endif .if !target(extract) extract: checksum ${EXTRACT_COOKIE} .endif .if !target(patch) patch: extract ${PATCH_COOKIE} .endif .if !target(configure) configure: patch ${CONFIGURE_COOKIE} .endif .if !target(build) build: configure ${BUILD_COOKIE} .endif .if !target(install) install: build ${INSTALL_COOKIE} .endif .if !target(package) package: install ${PACKAGE_COOKIE} .endif ${EXTRACT_COOKIE}: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-extract ${PATCH_COOKIE}: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-patch ${CONFIGURE_COOKIE}: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-configure ${BUILD_COOKIE}: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build ${INSTALL_COOKIE}: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-install ${PACKAGE_COOKIE}: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-package # And call the macros real-fetch: _PORT_USE real-extract: _PORT_USE @${ECHO_MSG} "===> Extracting for ${PKGNAME}" real-patch: _PORT_USE @${ECHO_MSG} "===> Patching for ${PKGNAME}" real-configure: _PORT_USE @${ECHO_MSG} "===> Configuring for ${PKGNAME}" real-build: _PORT_USE @${ECHO_MSG} "===> Building for ${PKGNAME}" real-install: _PORT_USE @${ECHO_MSG} "===> Installing for ${PKGNAME}" real-package: _PORT_USE # Empty pre-* and post-* targets, note we can't use .if !target() # in the _PORT_USE macro .for name in fetch extract patch configure build install package .if !target(pre-${name}) pre-${name}: @${DO_NADA} .endif .if !target(post-${name}) post-${name}: @${DO_NADA} .endif .endfor # Checkpatch # # Special target to verify patches .if !target(checkpatch) checkpatch: @cd ${.CURDIR} && ${MAKE} PATCH_CHECK_ONLY=yes ${.MAKEFLAGS} patch .endif # Reinstall # # Special target to re-run install .if !target(reinstall) reinstall: @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} @${MAKE} install .endif ################################################################ # Some more targets supplied for users' convenience ################################################################ # Cleaning up .if !target(pre-clean) pre-clean: @${DO_NADA} .endif .if !target(clean) clean: pre-clean .if !defined(NOCLEANDEPENDS) @${MAKE} clean-depends .endif @${ECHO_MSG} "===> Cleaning for ${PKGNAME}" .if !defined(NO_WRKDIR) @if [ -d ${WRKDIR} ]; then \ if [ -w ${WRKDIR} ]; then \ ${RM} -rf ${WRKDIR}; \ else \ ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \ fi; \ fi .else @${RM} -f ${WRKDIR}/.*_done .endif .endif .if !target(pre-distclean) pre-distclean: @${DO_NADA} .endif .if !target(distclean) distclean: pre-distclean clean @${ECHO_MSG} "===> Dist cleaning for ${PKGNAME}" @(if [ -d ${_DISTDIR} ]; then \ cd ${_DISTDIR}; \ ${RM} -f ${DISTFILES} ${PATCHFILES}; \ fi) .if defined(DIST_SUBDIR) -@${RMDIR} ${_DISTDIR} .endif .endif # Prints out a list of files to fetch (useful to do a batch fetch) .if !target(fetch-list) fetch-list: @${MKDIR} ${_DISTDIR} @(cd ${_DISTDIR}; \ for file in ${DISTFILES}; do \ if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ for site in ${MASTER_SITES}; do \ ${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '||' ; \ break; \ done; \ ${ECHO} "echo $${file} not fetched" ; \ fi \ done) .if defined(PATCHFILES) @(cd ${_DISTDIR}; \ for file in ${PATCHFILES}; do \ if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ for site in ${PATCH_SITES}; do \ ${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '||' ; \ break; \ done; \ ${ECHO} "echo $${file} not fetched" ; \ fi \ done) .endif .endif # Checksumming utilities .if !target(makesum) makesum: fetch @${MKDIR} ${FILESDIR} @if [ -f ${MD5_FILE} ]; then ${RM} -f ${MD5_FILE}; fi @(cd ${DISTDIR}; \ for file in ${_CKSUMFILES}; do \ ${MD5} $$file >> ${MD5_FILE}; \ done) @for file in ${_IGNOREFILES}; do \ ${ECHO} "MD5 ($$file) = IGNORE" >> ${MD5_FILE}; \ done .endif .if !target(checksum) checksum: fetch @if [ ! -f ${MD5_FILE} ]; then \ ${ECHO_MSG} ">> No MD5 checksum file."; \ else \ (cd ${DISTDIR}; OK="true"; \ for file in ${_CKSUMFILES}; do \ CKSUM=`${MD5} < $$file`; \ CKSUM2=`${GREP} "^MD5 ($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \ if [ "$$CKSUM2" = "" ]; then \ ${ECHO_MSG} ">> No checksum recorded for $$file."; \ OK="false"; \ elif [ "$$CKSUM2" = "IGNORE" ]; then \ ${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in md5 file even though"; \ ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \ OK="false"; \ elif [ "$$CKSUM" = "$$CKSUM2" ]; then \ ${ECHO_MSG} ">> Checksum OK for $$file."; \ else \ ${ECHO_MSG} ">> Checksum mismatch for $$file."; \ OK="false"; \ fi; \ done; \ for file in ${_IGNOREFILES}; do \ CKSUM2=`${GREP} "($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \ if [ "$$CKSUM2" = "" ]; then \ ${ECHO_MSG} ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \ OK="false"; \ elif [ "$$CKSUM2" != "IGNORE" ]; then \ ${ECHO_MSG} ">> Checksum for $$file is not set to IGNORE in md5 file even though"; \ ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \ OK="false"; \ fi; \ done; \ if [ "$$OK" != "true" ]; then \ ${ECHO_MSG} "Make sure the Makefile and md5 file (${MD5_FILE})"; \ ${ECHO_MSG} "are up to date. If you want to override this check, type"; \ ${ECHO_MSG} "\"make NO_CHECKSUM=yes [other args]\"."; \ exit 1; \ fi) ; \ fi .endif ################################################################ # The special package-building targets # You probably won't need to touch these ################################################################ # Nobody should want to override this unless PKGNAME is simply bogus. .if !target(package-name) package-name: @${ECHO} ${PKGNAME} .endif # Show (recursively) all the packages this package depends on. .if !target(package-depends) package-depends: @for dir in `${ECHO} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ if [ -d $$dir ]; then \ (cd $$dir ; ${MAKE} package-name package-depends); \ else \ ${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \ fi; \ done .endif # Build a package but don't check the package cookie .if !target(repackage) repackage: pre-repackage package pre-repackage: @${RM} -f ${PACKAGE_COOKIE} .endif # Build a package but don't check the cookie for installation, also don't # install package cookie .if !target(package-noinstall) package-noinstall: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package .endif ################################################################ # Dependency checking ################################################################ .if !target(depends) depends: lib-depends misc-depends @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends .if make(fetch-depends) DEPENDS_TMP+= ${FETCH_DEPENDS} .endif .if make(build-depends) DEPENDS_TMP+= ${BUILD_DEPENDS} .endif .if make(run-depends) DEPENDS_TMP+= ${RUN_DEPENDS} .endif _DEPENDS_USE: .USE .if defined(DEPENDS_TMP) .if !defined(NO_DEPENDS) @for i in ${DEPENDS_TMP}; do \ prog=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \ dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \ if expr "$$dir" : '.*:' > /dev/null; then \ target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \ dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \ else \ target=${DEPENDS_TARGET}; \ fi; \ if expr "$$prog" : \\/ >/dev/null; then \ if [ -e "$$prog" ]; then \ ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \ notfound=0; \ else \ ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \ notfound=1; \ fi; \ else \ if which "$$prog" > /dev/null 2>&1 ; then \ ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \ notfound=0; \ else \ ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - not found"; \ notfound=1; \ fi; \ fi; \ if [ $$notfound != 0 ]; then \ ${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \ if [ ! -d "$$dir" ]; then \ ${ECHO_MSG} ">> No directory for $$prog. Skipping.."; \ else \ (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \ ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \ fi; \ fi; \ done .endif .else @${DO_NADA} .endif fetch-depends: _DEPENDS_USE build-depends: _DEPENDS_USE run-depends: _DEPENDS_USE lib-depends: .if defined(LIB_DEPENDS) .if !defined(NO_DEPENDS) @for i in ${LIB_DEPENDS}; do \ lib=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \ dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \ if expr "$$dir" : '.*:' > /dev/null; then \ target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \ dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \ else \ target=${DEPENDS_TARGET}; \ fi; \ if /sbin/ldconfig -r | ${GREP} -q -e "-l$$lib"; then \ ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - found"; \ else \ ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - not found"; \ ${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \ if [ ! -d "$$dir" ]; then \ ${ECHO_MSG} ">> No directory for $$lib. Skipping.."; \ else \ (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \ ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \ fi; \ fi; \ done .endif .else @${DO_NADA} .endif misc-depends: .if defined(DEPENDS) .if !defined(NO_DEPENDS) @for dir in ${DEPENDS}; do \ if expr "$$dir" : '.*:' > /dev/null; then \ target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \ dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \ else \ target=${DEPENDS_TARGET}; \ fi; \ ${ECHO_MSG} "===> ${PKGNAME} depends on: $$dir"; \ ${ECHO_MSG} "===> Verifying $$target for $$dir"; \ if [ ! -d $$dir ]; then \ ${ECHO_MSG} ">> No directory for $$dir. Skipping.."; \ else \ (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \ fi \ done @${ECHO_MSG} "===> Returning to build of ${PKGNAME}" .endif .else @${DO_NADA} .endif .endif .if !target(clean-depends) clean-depends: .if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) \ || defined(RUN_DEPENDS) @for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u`; do \ if [ -d $$dir ] ; then \ (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \ fi \ done .endif .if defined(DEPENDS) @for dir in `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ if [ -d $$dir ] ; then \ (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \ fi \ done .endif .endif .if !target(depends-list) depends-list: @for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ (cd $$dir; ${MAKE} package-name depends-list); \ done .endif ################################################################ # Everything after here are internal targets and really # shouldn't be touched by anybody but the release engineers. ################################################################ # This target generates an index entry suitable for aggregation into # a large index. Format is: # # distribution-name|port-path|installation-prefix|comment| \ # description-file|maintainer|categories|build deps|run deps # .if !target(describe) describe: @${ECHO} -n "${PKGNAME}|${.CURDIR}|"; \ ${ECHO} -n "${PREFIX}|"; \ if [ -f ${COMMENT} ]; then \ ${ECHO} -n "`${CAT} ${COMMENT}`"; \ else \ ${ECHO} -n "** No Description"; \ fi; \ if [ -f ${DESCR} ]; then \ ${ECHO} -n "|${DESCR}"; \ else \ ${ECHO} -n "|/dev/null"; \ fi; \ ${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"; \ case "A${FETCH_DEPENDS}B${BUILD_DEPENDS}C${LIB_DEPENDS}D${DEPENDS}E" in \ ABCDE) ;; \ *) cd ${.CURDIR} && ${ECHO} -n `make depends-list|sort -u`;; \ esac; \ ${ECHO} -n "|"; \ case "A${RUN_DEPENDS}B${LIB_DEPENDS}C${DEPENDS}D" in \ ABCD) ;; \ *) cd ${.CURDIR} && ${ECHO} -n `make package-depends|sort -u`;; \ esac; \ ${ECHO} "" .endif .if !target(readmes) readmes: readme .endif .if !target(readme) readme: @rm -f README.html @cd ${.CURDIR} && make README.html .endif README.html: @${ECHO_MSG} "===> Creating README.html for ${PKGNAME}" @${CAT} ${TEMPLATES}/README.port | \ ${SED} -e 's%%PORT%%'`${ECHO} ${.CURDIR} | ${SED} -e 's.*/\([^/]*/[^/]*\)$$\1'`'g' \ -e 's%%PKG%%${PKGNAME}g' \ -e '/%%COMMENT%%/r${PKGDIR}/COMMENT' \ -e '/%%COMMENT%%/d' \ -e 's%%BUILD_DEPENDS%%'"`${MAKE} print-depends-list`"'' \ -e 's%%RUN_DEPENDS%%'"`${MAKE} print-package-depends`"'' \ >> $@ .if !target(print-depends-list) print-depends-list: .if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \ defined(LIB_DEPENDS) || defined(DEPENDS) @${ECHO} -n 'This port requires package(s) "' @${ECHO} -n `make depends-list | sort -u` @${ECHO} '" to build.' .endif .endif .if !target(print-package-depends) print-package-depends: .if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) || defined(DEPENDS) @${ECHO} -n 'This port requires package(s) "' @${ECHO} -n `make package-depends | sort -u` @${ECHO} '" to run.' .endif .endif # Fake installation of package so that user can pkg_delete it later. # Also, make sure that an installed port is recognized correctly in # accordance to the @pkgdep directive in the packing lists .if !target(fake-pkg) fake-pkg: @if [ ! -f ${PLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; exit 1; fi @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi .if defined(FORCE_PKG_REGISTER) @${RM} -rf ${PKG_DBDIR}/${PKGNAME} .endif @if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \ ${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \ ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \ ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \ ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \ ${CP} ${COMMENT} ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \ if [ -f ${PKGDIR}/INSTALL ]; then \ ${CP} ${PKGDIR}/INSTALL ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \ fi; \ if [ -f ${PKGDIR}/DEINSTALL ]; then \ ${CP} ${PKGDIR}/DEINSTALL ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \ fi; \ if [ -f ${PKGDIR}/REQ ]; then \ ${CP} ${PKGDIR}/REQ ${PKG_DBDIR}/${PKGNAME}/+REQ; \ fi; \ for dep in `make package-depends ECHO_MSG=/usr/bin/true | sort -u`; do \ if [ -d ${PKG_DBDIR}/$$dep ]; then \ if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \ >/dev/null 2>&1; then \ ${ECHO} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \ fi; \ fi; \ done; \ fi .endif # Depend is generally meaningless for arbitrary ports, but if someone wants # one they can override this. This is just to catch people who've gotten into # the habit of typing `make depend all install' as a matter of course. # .if !target(depend) depend: .endif # Same goes for tags .if !target(tags) tags: .endif