/* * Copyright (c) 1997 Ted Faber * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Absolutely no warranty of function or purpose is made by the author * Ted Faber. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #include #include #include #include #include #include #include #include #include #include #define PRVERB(x) if (bootverbose) device_printf x /* * Set up the CL-PD6832 to look like a ISA based PCMCIA chip (a * PD672X). This routine is called once per PCMCIA socket. */ static void pd6832_legacy_init(device_t dev) { u_long bcr; /* to set interrupts */ u_short io_port; /* the io_port to map this slot on */ static int num6832; /* The number of 6832s initialized */ int unit; num6832 = 0; unit = device_get_unit(dev); /* * Some BIOS leave the legacy address uninitialized. This * insures that the PD6832 puts itself where the driver will * look. We assume that multiple 6832's should be laid out * sequentially. We only initialize the first socket's legacy port, * the other is a dummy. */ io_port = PCIC_INDEX_0 + num6832 * CLPD6832_NUM_REGS; if (unit == 0) pci_write_config(dev, CLPD6832_LEGACY_16BIT_IOADDR, io_port & ~CLPD6832_LEGACY_16BIT_IOENABLE, 4); /* * I think this should be a call to pci_map_port, but that * routine won't map regiaters above 0x28, and the register we * need to map is 0x44. */ io_port = pci_read_config(dev, CLPD6832_LEGACY_16BIT_IOADDR, 4) & ~CLPD6832_LEGACY_16BIT_IOENABLE; /* * Configure the first I/O window to contain CLPD6832_NUM_REGS * words and deactivate the second by setting the limit lower * than the base. */ pci_write_config(dev, CLPD6832_IO_BASE0, io_port | 1, 4); pci_write_config(dev, CLPD6832_IO_LIMIT0, (io_port + CLPD6832_NUM_REGS) | 1, 4); pci_write_config(dev, CLPD6832_IO_BASE1, (io_port + 0x20) | 1, 4); pci_write_config(dev, CLPD6832_IO_LIMIT1, io_port | 1, 4); /* * Set default operating mode (I/O port space) and allocate * this socket to the current unit. */ pci_write_config(dev, PCIR_COMMAND, CLPD6832_COMMAND_DEFAULTS, 4); pci_write_config(dev, CLPD6832_SOCKET, unit, 4); /* * Set up the card inserted/card removed interrupts to come * through the isa IRQ. */ bcr = pci_read_config(dev, CLPD6832_BRIDGE_CONTROL, 4); bcr |= (CLPD6832_BCR_ISA_IRQ|CLPD6832_BCR_MGMT_IRQ_ENA); pci_write_config(dev, CLPD6832_BRIDGE_CONTROL, bcr, 4); /* After initializing 2 sockets, the chip is fully configured */ if (unit == 1) num6832++; PRVERB((dev, "CardBus: Legacy PC-card 16bit I/O address [0x%x]\n", io_port)); } /* * TI1XXX PCI-CardBus Host Adapter specific function code. * This function is separated from pcic_pci_attach(). * Support Device: TI1130,TI1131,TI1250,TI1220. * Test Device: TI1221. * Takeshi Shibagaki(shiba@jp.freebsd.org). */ static void ti1xxx_pci_init(device_t dev) { u_long syscntl,devcntl,cardcntl; u_int32_t device_id = pci_get_devid(dev); char buf[128]; int ti113x = (device_id == PCI_DEVICE_ID_PCIC_TI1130) || (device_id == PCI_DEVICE_ID_PCIC_TI1131); syscntl = pci_read_config(dev, TI113X_PCI_SYSTEM_CONTROL, 4); devcntl = pci_read_config(dev, TI113X_PCI_DEVICE_CONTROL, 1); cardcntl = pci_read_config(dev, TI113X_PCI_CARD_CONTROL, 1); switch(ti113x){ case 0 : strcpy(buf, "TI12XX PCI Config Reg: "); break; case 1 : strcpy(buf, "TI113X PCI Config Reg: "); /* * Defalut card control register setting is * PCI interrupt. The method of this code * switches PCI INT and ISA IRQ by bit 7 of * Bridge Control Register(Offset:0x3e,0x13e). * Takeshi Shibagaki(shiba@jp.freebsd.org) */ cardcntl |= TI113X_CARDCNTL_PCI_IREQ; cardcntl |= TI113X_CARDCNTL_PCI_CSC; if (syscntl & TI113X_SYSCNTL_CLKRUN_ENA){ if (syscntl & TI113X_SYSCNTL_CLKRUN_SEL) strcat(buf, "[clkrun irq 12]"); else strcat(buf, "[clkrun irq 10]"); } break; } if (cardcntl & TI113X_CARDCNTL_RING_ENA) strcat(buf, "[ring enable]"); if (cardcntl & TI113X_CARDCNTL_SPKR_ENA) strcat(buf, "[speaker enable]"); if (syscntl & TI113X_SYSCNTL_PWRSAVINGS) strcat(buf, "[pwr save]"); switch(devcntl & TI113X_DEVCNTL_INTR_MASK){ case TI113X_DEVCNTL_INTR_ISA : strcat(buf, "[CSC parallel isa irq]"); break; case TI113X_DEVCNTL_INTR_SERIAL : strcat(buf, "[CSC serial isa irq]"); break; case TI113X_DEVCNTL_INTR_NONE : strcat(buf, "[pci only]"); break; case TI12XX_DEVCNTL_INTR_ALLSERIAL : strcat(buf, "[FUNC pci int + CSC serial isa irq]"); break; } pci_write_config(dev, TI113X_PCI_CARD_CONTROL, cardcntl, 1); if (ti113x) cardcntl = pci_read_config(dev, TI113X_PCI_CARD_CONTROL, 1); device_printf(dev, "%s\n",buf); } static void generic_cardbus_attach(device_t dev) { u_int16_t brgcntl; u_int32_t iobase; int unit; unit = device_get_unit(dev); /* Output ISA IRQ indicated in ExCA register(0x03). */ brgcntl = pci_read_config(dev, CB_PCI_BRIDGE_CTRL, 2); brgcntl |= CB_BCR_INT_EXCA; pci_write_config(dev, CB_PCI_BRIDGE_CTRL, brgcntl, 2); /* 16bit Legacy Mode Base Address */ if (unit != 0) return; iobase = pci_read_config(dev, CB_PCI_LEGACY16_IOADDR, 2) & ~CB_PCI_LEGACY16_IOENABLE; if (!iobase) { iobase = 0x3e0 | CB_PCI_LEGACY16_IOENABLE; pci_write_config(dev, CB_PCI_LEGACY16_IOADDR, iobase, 2); iobase = pci_read_config(dev, CB_PCI_LEGACY16_IOADDR, 2) & ~CB_PCI_LEGACY16_IOENABLE; } PRVERB((dev, "Legacy address set to %#x\n", iobase)); return; } /* * Return the ID string for the controller if the vendor/product id * matches, NULL otherwise. */ static int pcic_pci_probe(device_t dev) { u_int32_t device_id; char *desc; device_id = pci_get_devid(dev); desc = NULL; switch (device_id) { case PCI_DEVICE_ID_PCIC_CLPD6832: desc = "Cirrus Logic PD6832 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1031: desc = "TI PCI-1031 PCI-PCMCIA Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1130: desc = "TI PCI-1130 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1131: desc = "TI PCI-1131 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1211: desc = "TI PCI-1211 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1220: desc = "TI PCI-1220 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1221: desc = "TI PCI-1221 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1225: desc = "TI PCI-1225 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1250: desc = "TI PCI-1250 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1251: desc = "TI PCI-1251 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1251B: desc = "TI PCI-1251B PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1410: desc = "TI PCI-1410 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1420: desc = "TI PCI-1420 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1450: desc = "TI PCI-1450 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_PCIC_TI1451: desc = "TI PCI-1451 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_TOSHIBA_TOPIC95: desc = "Toshiba ToPIC95 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_TOSHIBA_TOPIC97: desc = "Toshiba ToPIC97 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_RICOH_RL5C465: desc = "Ricoh RL5C465 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_RICOH_RL5C475: desc = "Ricoh RL5C475 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_RICOH_RL5C476: desc = "Ricoh RL5C476 PCI-CardBus Bridge"; break; case PCI_DEVICE_ID_RICOH_RL5C478: desc = "Ricoh RL5C478 PCI-CardBus Bridge"; break; /* 16bit PC-card bridges */ case PCI_DEVICE_ID_PCIC_CLPD6729: desc = "Cirrus Logic PD6729/6730 PC-Card Controller"; break; case PCI_DEVICE_ID_PCIC_OZ6729: desc = "O2micro OZ6729 PC-Card Bridge"; break; case PCI_DEVICE_ID_PCIC_OZ6730: desc = "O2micro OZ6730 PC-Card Bridge"; break; default: break; } if (desc == NULL) return (ENXIO); device_set_desc(dev, desc); return 0; /* exact match */ } /* * General PCI based card dispatch routine. Right now * it only understands the CL-PD6832. */ static int pcic_pci_attach(device_t dev) { u_int32_t device_id = pci_get_devid(dev); u_long command; /* Init. CardBus/PC-card controllers as 16-bit PC-card controllers */ /* Place any per "slot" initialization here */ /* * In sys/pci/pcireg.h, PCIR_COMMAND must be separated * PCI_COMMAND_REG(0x04) and PCI_STATUS_REG(0x06). * Takeshi Shibagaki(shiba@jp.freebsd.org). */ command = pci_read_config(dev, PCIR_COMMAND, 4); command |= PCIM_CMD_PORTEN | PCIM_CMD_MEMEN; pci_write_config(dev, PCIR_COMMAND, command, 4); switch (device_id) { case PCI_DEVICE_ID_PCIC_TI1130: case PCI_DEVICE_ID_PCIC_TI1131: case PCI_DEVICE_ID_PCIC_TI1211: case PCI_DEVICE_ID_PCIC_TI1220: case PCI_DEVICE_ID_PCIC_TI1221: case PCI_DEVICE_ID_PCIC_TI1225: case PCI_DEVICE_ID_PCIC_TI1250: case PCI_DEVICE_ID_PCIC_TI1251: case PCI_DEVICE_ID_PCIC_TI1251B: case PCI_DEVICE_ID_PCIC_TI1410: case PCI_DEVICE_ID_PCIC_TI1420: case PCI_DEVICE_ID_PCIC_TI1450: case PCI_DEVICE_ID_PCIC_TI1451: ti1xxx_pci_init(dev); /* FALLTHROUGH */ default: generic_cardbus_attach(dev); break; case PCI_DEVICE_ID_PCIC_CLPD6832: pd6832_legacy_init(dev); break; case PCI_DEVICE_ID_PCIC_TI1031: break; } if (bootverbose) { int i, j; u_char *p; u_long *pl; printf("PCI Config space:\n"); for (j = 0; j < 0x98; j += 16) { printf("%02x: ", j); for (i = 0; i < 16; i += 4) printf(" %08x", pci_read_config(dev, i+j, 4)); printf("\n"); } p = (u_char *)pmap_mapdev(pci_read_config(dev, 0x10, 4), 0x1000); pl = (u_long *)p; printf("Cardbus Socket registers:\n"); printf("00: "); for (i = 0; i < 4; i += 1) printf(" %08lx:", pl[i]); printf("\n10: "); for (i = 4; i < 8; i += 1) printf(" %08lx:", pl[i]); printf("\nExCa registers:\n"); for (i = 0; i < 0x40; i += 16) printf("%02x: %16D\n", i, p + 0x800 + i, " "); } return 0; } static device_method_t pcic_pci_methods[] = { /* Device interface */ DEVMETHOD(device_probe, pcic_pci_probe), DEVMETHOD(device_attach, pcic_pci_attach), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), DEVMETHOD(device_shutdown, bus_generic_shutdown), {0, 0} }; static driver_t pcic_pci_driver = { "pcic-pci", pcic_pci_methods, 0 /* no softc */ }; static devclass_t pcic_pci_devclass; DRIVER_MODULE(pcic_pci, pci, pcic_pci_driver, pcic_pci_devclass, 0, 0);