/* $FreeBSD$ */ /* * Copyright (c) 1996-2000 Distributed Processing Technology Corporation * Copyright (c) 2000 Adaptec Corporation * All rights reserved. * * TERMS AND CONDITIONS OF USE * * Redistribution and use in source form, with or without modification, are * permitted provided that redistributions of source code must retain the * above copyright notice, this list of conditions and the following disclaimer. * * This software is provided `as is' by Adaptec and any express or implied * warranties, including, but not limited to, the implied warranties of * merchantability and fitness for a particular purpose, are disclaimed. In no * event shall Adaptec be liable for any direct, indirect, incidental, special, * exemplary or consequential damages (including, but not limited to, * procurement of substitute goods or services; loss of use, data, or profits; * or business interruptions) however caused and on any theory of liability, * whether in contract, strict liability, or tort (including negligence or * otherwise) arising in any way out of the use of this driver software, even * if advised of the possibility of such damage. * * SCSI I2O host adapter driver * * V1.03 2000/07/12 Mark_Salyzyn@adaptec.com * - The controller is not actually an ASR (Adaptec SCSI RAID) * series that is visible, it's more of an internal code name. * remove any visible references within reason for now. * - bus_ptr->LUN was not correctly zeroed when initially * allocated causing a possible panic of the operating system * during boot. * V1.02 2000/06/26 Mark_Salyzyn@adaptec.com * - Code always fails for ASR_getTid affecting performance. * - initiated a set of changes that resulted from a formal * code inspection by Mark_Salyzyn@adaptec.com, * George_Dake@adaptec.com, Jeff_Zeak@adaptec.com, * Martin_Wilson@adaptec.com and Vincent_Trandoan@adaptec.com. * Their findings were focussed on the LCT & TID handler, and * all resulting changes were to improve code readability, * consistency or have a positive effect on performance. * V1.01 2000/06/14 Mark_Salyzyn@adaptec.com * - Passthrough returned an incorrect error. * - Passthrough did not migrate the intrinsic scsi layer wakeup * on command completion. * - generate control device nodes using make_dev and delete_dev. * - Performance affected by TID caching reallocing. * - Made suggested changes by Justin_Gibbs@adaptec.com * - use splcam instead of splbio. * - use cam_imask instead of bio_imask. * - use u_int8_t instead of u_char. * - use u_int16_t instead of u_short. * - use u_int32_t instead of u_long where appropriate. * - use 64 bit context handler instead of 32 bit. * - create_ccb should only allocate the worst case * requirements for the driver since CAM may evolve * making union ccb much larger than needed here. * renamed create_ccb to asr_alloc_ccb. * - go nutz justifying all debug prints as macros * defined at the top and remove unsightly ifdefs. * - INLINE STATIC viewed as confusing. Historically * utilized to affect code performance and debug * issues in OS, Compiler or OEM specific situations. * V1.00 2000/05/31 Mark_Salyzyn@adaptec.com * - Ported from FreeBSD 2.2.X DPT I2O driver. * changed struct scsi_xfer to union ccb/struct ccb_hdr * changed variable name xs to ccb * changed struct scsi_link to struct cam_path * changed struct scsibus_data to struct cam_sim * stopped using fordriver for holding on to the TID * use proprietary packet creation instead of scsi_inquire * CAM layer sends synchronize commands. */ #define ASR_VERSION 1 #define ASR_REVISION '0' #define ASR_SUBREVISION '3' #define ASR_MONTH 7 #define ASR_DAY 12 #define ASR_YEAR 2000 - 1980 /* * Debug macros to resude the unsightly ifdefs */ #if (defined(DEBUG_ASR) || defined(DEBUG_ASR_USR_CMD) || defined(DEBUG_ASR_CMD)) # define debug_asr_message(message) \ { \ u_int32_t * pointer = (u_int32_t *)message; \ u_int32_t length = I2O_MESSAGE_FRAME_getMessageSize(message);\ u_int32_t counter = 0; \ \ while (length--) { \ printf ("%08lx%c", (u_long)*(pointer++), \ (((++counter & 7) == 0) || (length == 0)) \ ? '\n' \ : ' '); \ } \ } #endif /* DEBUG_ASR || DEBUG_ASR_USR_CMD || DEBUG_ASR_CMD */ #if (defined(DEBUG_ASR)) /* Breaks on none STDC based compilers :-( */ # define debug_asr_printf(fmt,args...) printf(fmt, ##args) # define debug_asr_dump_message(message) debug_asr_message(message) # define debug_asr_print_path(ccb) xpt_print_path(ccb->ccb_h.path); /* None fatal version of the ASSERT macro */ # if (defined(__STDC__)) # define ASSERT(phrase) if(!(phrase))printf(#phrase " at line %d file %s\n",__LINE__,__FILE__) # else # define ASSERT(phrase) if(!(phrase))printf("phrase" " at line %d file %s\n",__LINE__,__FILE__) # endif #else /* DEBUG_ASR */ # define debug_asr_printf(fmt,args...) # define debug_asr_dump_message(message) # define debug_asr_print_path(ccb) # define ASSERT(x) #endif /* DEBUG_ASR */ /* * If DEBUG_ASR_CMD is defined: * 0 - Display incoming SCSI commands * 1 - add in a quick character before queueing. * 2 - add in outgoing message frames. */ #if (defined(DEBUG_ASR_CMD)) # define debug_asr_cmd_printf(fmt,args...) printf(fmt,##args) # define debug_asr_dump_ccb(ccb) \ { \ u_int8_t * cp = (unsigned char *)&(ccb->csio.cdb_io); \ int len = ccb->csio.cdb_len; \ \ while (len) { \ debug_asr_cmd_printf (" %02x", *(cp++)); \ --len; \ } \ } # if (DEBUG_ASR_CMD > 0) # define debug_asr_cmd1_printf debug_asr_cmd_printf # else # define debug_asr_cmd1_printf(fmt,args...) # endif # if (DEBUG_ASR_CMD > 1) # define debug_asr_cmd2_printf debug_asr_cmd_printf # define debug_asr_cmd2_dump_message(message) debug_asr_message(message) # else # define debug_asr_cmd2_printf(fmt,args...) # define debug_asr_cmd2_dump_message(message) # endif #else /* DEBUG_ASR_CMD */ # define debug_asr_cmd_printf(fmt,args...) # define debug_asr_cmd_dump_ccb(ccb) # define debug_asr_cmd1_printf(fmt,args...) # define debug_asr_cmd2_printf(fmt,args...) # define debug_asr_cmd2_dump_message(message) #endif /* DEBUG_ASR_CMD */ #if (defined(DEBUG_ASR_USR_CMD)) # define debug_usr_cmd_printf(fmt,args...) printf(fmt,##args) # define debug_usr_cmd_dump_message(message) debug_usr_message(message) #else /* DEBUG_ASR_USR_CMD */ # define debug_usr_cmd_printf(fmt,args...) # define debug_usr_cmd_dump_message(message) #endif /* DEBUG_ASR_USR_CMD */ #define dsDescription_size 46 /* Snug as a bug in a rug */ #include "dev/asr/dptsig.h" static dpt_sig_S ASR_sig = { { 'd', 'P', 't', 'S', 'i', 'G'}, SIG_VERSION, PROC_INTEL, PROC_386 | PROC_486 | PROC_PENTIUM | PROC_SEXIUM, FT_HBADRVR, 0, OEM_DPT, OS_FREE_BSD, CAP_ABOVE16MB, DEV_ALL, ADF_ALL_SC5, 0, 0, ASR_VERSION, ASR_REVISION, ASR_SUBREVISION, ASR_MONTH, ASR_DAY, ASR_YEAR, /* 01234567890123456789012345678901234567890123456789 < 50 chars */ "Adaptec FreeBSD 4.0.0 Unix SCSI I2O HBA Driver" /* ^^^^^ asr_attach alters these to match OS */ }; #include /* TRUE=1 and FALSE=0 defined here */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define STATIC static #define INLINE #if (defined(DEBUG_ASR) && (DEBUG_ASR > 0)) # undef STATIC # define STATIC # undef INLINE # define INLINE #endif #define IN #define OUT #define INOUT #define osdSwap4(x) ((u_long)ntohl((u_long)(x))) #define KVTOPHYS(x) vtophys(x) #include "dev/asr/dptalign.h" #include "dev/asr/i2oexec.h" #include "dev/asr/i2obscsi.h" #include "dev/asr/i2odpt.h" #include "dev/asr/i2oadptr.h" #include "opt_asr.h" #include "dev/asr/sys_info.h" /* Configuration Definitions */ #define SG_SIZE 58 /* Scatter Gather list Size */ #define MAX_TARGET_ID 126 /* Maximum Target ID supported */ #define MAX_LUN 255 /* Maximum LUN Supported */ #define MAX_CHANNEL 7 /* Maximum Channel # Supported by driver */ #define MAX_INBOUND 2000 /* Max CCBs, Also Max Queue Size */ #define MAX_OUTBOUND 256 /* Maximum outbound frames/adapter */ #define MAX_INBOUND_SIZE 512 /* Maximum inbound frame size */ #define MAX_MAP 4194304L /* Maximum mapping size of IOP */ /************************************************************************** ** ASR Host Adapter structure - One Structure For Each Host Adapter That ** ** Is Configured Into The System. The Structure Supplies Configuration ** ** Information, Status Info, Queue Info And An Active CCB List Pointer. ** ***************************************************************************/ /* I2O register set */ typedef struct { U8 Address[0x30]; volatile U32 Status; volatile U32 Mask; # define Mask_InterruptsDisabled 0x08 U32 x[2]; volatile U32 ToFIFO; /* In Bound FIFO */ volatile U32 FromFIFO; /* Out Bound FIFO */ } i2oRegs_t; /* * A MIX of performance and space considerations for TID lookups */ typedef u_int16_t tid_t; typedef struct { u_int32_t size; /* up to MAX_LUN */ tid_t TID[1]; } lun2tid_t; typedef struct { u_int32_t size; /* up to MAX_TARGET */ lun2tid_t * LUN[1]; } target2lun_t; /* * To ensure that we only allocate and use the worst case ccb here, lets * make our own local ccb union. If asr_alloc_ccb is utilized for another * ccb type, ensure that you add the additional structures into our local * ccb union. To ensure strict type checking, we will utilize the local * ccb definition wherever possible. */ union asr_ccb { struct ccb_hdr ccb_h; /* For convenience */ struct ccb_scsiio csio; struct ccb_setasync csa; }; typedef struct Asr_softc { u_int16_t ha_irq; void * ha_Base; /* base port for each board */ u_int8_t * volatile ha_blinkLED; i2oRegs_t * ha_Virt; /* Base address of adapter */ I2O_IOP_ENTRY ha_SystemTable; LIST_HEAD(,ccb_hdr) ha_ccb; /* ccbs in use */ struct cam_path * ha_path[MAX_CHANNEL+1]; struct cam_sim * ha_sim[MAX_CHANNEL+1]; #if __FreeBSD_version >= 400000 struct resource * ha_mem_res; struct resource * ha_irq_res; void * ha_intr; #endif u_int8_t ha_adapter_target[MAX_CHANNEL+1]; PI2O_LCT ha_LCT; /* Complete list of devices */ # define le_type IdentityTag[0] # define I2O_BSA 0x20 # define I2O_FCA 0x40 # define I2O_SCSI 0x00 # define I2O_PORT 0x80 # define I2O_UNKNOWN 0x7F # define le_bus IdentityTag[1] # define le_target IdentityTag[2] # define le_lun IdentityTag[3] target2lun_t * ha_targets[MAX_CHANNEL+1]; PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME ha_Msgs; u_long ha_Msgs_Phys; u_int16_t ha_Msgs_Count; /* Configuration information */ /* The target id maximums we take */ u_int8_t ha_MaxBus; /* Maximum bus */ u_int8_t ha_MaxId; /* Maximum target ID */ u_int8_t ha_MaxLun; /* Maximum target LUN */ u_int8_t ha_SgSize; /* Max SG elements */ u_int8_t ha_pciBusNum; u_int8_t ha_pciDeviceNum; u_int16_t ha_QueueSize; /* Max outstanding commands */ /* Links into other parents and HBAs */ struct Asr_softc * ha_next; /* HBA list */ #ifdef ASR_MEASURE_PERFORMANCE #define MAX_TIMEQ_SIZE 256 // assumes MAX 256 scsi commands sent asr_perf_t ha_performance; u_int32_t ha_submitted_ccbs_count; // Queueing macros for a circular queue #define TIMEQ_FREE_LIST_EMPTY(head, tail) (-1 == (head) && -1 == (tail)) #define TIMEQ_FREE_LIST_FULL(head, tail) ((((tail) + 1) % MAX_TIMEQ_SIZE) == (head)) #define ENQ_TIMEQ_FREE_LIST(item, Q, head, tail) \ if (!TIMEQ_FREE_LIST_FULL((head), (tail))) { \ if TIMEQ_FREE_LIST_EMPTY((head),(tail)) { \ (head) = (tail) = 0; \ } \ else (tail) = ((tail) + 1) % MAX_TIMEQ_SIZE; \ Q[(tail)] = (item); \ } \ else { \ debug_asr_printf("asr: Enqueueing when TimeQ Free List is full... This should not happen!\n"); \ } #define DEQ_TIMEQ_FREE_LIST(item, Q, head, tail) \ if (!TIMEQ_FREE_LIST_EMPTY((head), (tail))) { \ item = Q[(head)]; \ if ((head) == (tail)) { (head) = (tail) = -1; } \ else (head) = ((head) + 1) % MAX_TIMEQ_SIZE; \ } \ else { \ (item) = -1; \ debug_asr_printf("asr: Dequeueing when TimeQ Free List is empty... This should not happen!\n"); \ } // Circular queue of time stamps struct timeval ha_timeQ[MAX_TIMEQ_SIZE]; u_int32_t ha_timeQFreeList[MAX_TIMEQ_SIZE]; int ha_timeQFreeHead; int ha_timeQFreeTail; #endif } Asr_softc_t; STATIC Asr_softc_t * Asr_softc; /* * Prototypes of the routines we have in this object. */ /* Externally callable routines */ #if __FreeBSD_version >= 400000 #define PROBE_ARGS IN device_t tag #define PROBE_RET int #define PROBE_SET() u_long id = (pci_get_device(tag)<<16)|pci_get_vendor(tag) #define PROBE_RETURN(retval) if(retval){device_set_desc(tag,retval);return(0);}else{return(ENXIO);} #define ATTACH_ARGS IN device_t tag #define ATTACH_RET int #define ATTACH_SET() int unit = device_get_unit(tag) #define ATTACH_RETURN(retval) return(retval) #else #define PROBE_ARGS IN pcici_t tag, IN pcidi_t id #define PROBE_RET const char * #define PROBE_SET() #define PROBE_RETURN(retval) return(retval) #define ATTACH_ARGS IN pcici_t tag, IN int unit #define ATTACH_RET void #define ATTACH_SET() #define ATTACH_RETURN(retval) return #endif /* I2O HDM interface */ STATIC PROBE_RET asr_probe __P((PROBE_ARGS)); STATIC ATTACH_RET asr_attach __P((ATTACH_ARGS)); /* DOMINO placeholder */ STATIC PROBE_RET domino_probe __P((PROBE_ARGS)); STATIC ATTACH_RET domino_attach __P((ATTACH_ARGS)); /* MODE0 adapter placeholder */ STATIC PROBE_RET mode0_probe __P((PROBE_ARGS)); STATIC ATTACH_RET mode0_attach __P((ATTACH_ARGS)); STATIC Asr_softc_t * ASR_get_sc __P(( IN dev_t dev)); STATIC int asr_ioctl __P(( IN dev_t dev, IN u_long cmd, INOUT caddr_t data, int flag, struct proc * proc)); STATIC int asr_open __P(( IN dev_t dev, int32_t flags, int32_t ifmt, IN struct proc * proc)); STATIC int asr_close __P(( dev_t dev, int flags, int ifmt, struct proc * proc)); STATIC int asr_intr __P(( IN Asr_softc_t * sc)); STATIC void asr_timeout __P(( INOUT void * arg)); STATIC int ASR_init __P(( IN Asr_softc_t * sc)); STATIC INLINE int ASR_acquireLct __P(( INOUT Asr_softc_t * sc)); STATIC INLINE int ASR_acquireHrt __P(( INOUT Asr_softc_t * sc)); STATIC void asr_action __P(( IN struct cam_sim * sim, IN union ccb * ccb)); STATIC void asr_async __P(( void * callback_arg, u_int32_t code, struct cam_path * path, void * arg)); STATIC void asr_poll __P(( IN struct cam_sim * sim)); /* * Here is the auto-probe structure used to nest our tests appropriately * during the startup phase of the operating system. */ #if __FreeBSD_version >= 400000 STATIC device_method_t asr_methods[] = { DEVMETHOD(device_probe, asr_probe), DEVMETHOD(device_attach, asr_attach), { 0, 0 } }; STATIC driver_t asr_driver = { "asr", asr_methods, sizeof(Asr_softc_t) }; STATIC devclass_t asr_devclass; DRIVER_MODULE(asr, pci, asr_driver, asr_devclass, 0, 0); STATIC device_method_t domino_methods[] = { DEVMETHOD(device_probe, domino_probe), DEVMETHOD(device_attach, domino_attach), { 0, 0 } }; STATIC driver_t domino_driver = { "domino", domino_methods, 0 }; STATIC devclass_t domino_devclass; DRIVER_MODULE(domino, pci, domino_driver, domino_devclass, 0, 0); STATIC device_method_t mode0_methods[] = { DEVMETHOD(device_probe, mode0_probe), DEVMETHOD(device_attach, mode0_attach), { 0, 0 } }; STATIC driver_t mode0_driver = { "mode0", mode0_methods, 0 }; STATIC devclass_t mode0_devclass; DRIVER_MODULE(mode0, pci, mode0_driver, mode0_devclass, 0, 0); #else STATIC u_long asr_pcicount = 0; STATIC struct pci_device asr_pcidev = { "asr", asr_probe, asr_attach, &asr_pcicount, NULL }; DATA_SET (asr_pciset, asr_pcidev); STATIC u_long domino_pcicount = 0; STATIC struct pci_device domino_pcidev = { "domino", domino_probe, domino_attach, &domino_pcicount, NULL }; DATA_SET (domino_pciset, domino_pcidev); STATIC u_long mode0_pcicount = 0; STATIC struct pci_device mode0_pcidev = { "mode0", mode0_probe, mode0_attach, &mode0_pcicount, NULL }; DATA_SET (mode0_pciset, mode0_pcidev); #endif /* * devsw for asr hba driver * * only ioctl is used. the sd driver provides all other access. */ #define CDEV_MAJOR 154 /* preferred default character major */ STATIC struct cdevsw asr_cdevsw = { asr_open, /* open */ asr_close, /* close */ noread, /* read */ nowrite, /* write */ asr_ioctl, /* ioctl */ nopoll, /* poll */ nommap, /* mmap */ nostrategy, /* strategy */ "asr", /* name */ CDEV_MAJOR, /* maj */ nodump, /* dump */ nopsize, /* psize */ 0, /* flags */ }; #ifdef ASR_MEASURE_PERFORMANCE STATIC u_int32_t asr_time_delta __P((IN struct timeval start, IN struct timeval end)); #endif /* * Initialize the dynamic cdevsw hooks. */ STATIC void asr_drvinit ( void * unused) { static int asr_devsw_installed = 0; if (asr_devsw_installed) { return; } asr_devsw_installed++; /* * Find a free spot (the report during driver load used by * osd layer in engine to generate the controlling nodes). */ while ((asr_cdevsw.d_maj < NUMCDEVSW) && (devsw(makedev(asr_cdevsw.d_maj,0)) != (struct cdevsw *)NULL)) { ++asr_cdevsw.d_maj; } if (asr_cdevsw.d_maj >= NUMCDEVSW) for ( asr_cdevsw.d_maj = 0; (asr_cdevsw.d_maj < CDEV_MAJOR) && (devsw(makedev(asr_cdevsw.d_maj,0)) != (struct cdevsw *)NULL); ++asr_cdevsw.d_maj); /* * Come to papa */ cdevsw_add(&asr_cdevsw); /* * delete any nodes that would attach to the primary adapter, * let the adapter scans add them. */ destroy_dev(makedev(asr_cdevsw.d_maj,0)); } /* asr_drvinit */ /* Must initialize before CAM layer picks up our HBA driver */ SYSINIT(asrdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,asr_drvinit,NULL) /* I2O support routines */ #define defAlignLong(STRUCT,NAME) char NAME[sizeof(STRUCT)] #define getAlignLong(STRUCT,NAME) ((STRUCT *)(NAME)) /* * Fill message with default. */ STATIC PI2O_MESSAGE_FRAME ASR_fillMessage ( IN char * Message, IN u_int16_t size) { OUT PI2O_MESSAGE_FRAME Message_Ptr; Message_Ptr = getAlignLong(I2O_MESSAGE_FRAME, Message); bzero ((void *)Message_Ptr, size); I2O_MESSAGE_FRAME_setVersionOffset(Message_Ptr, I2O_VERSION_11); I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr, (size + sizeof(U32) - 1) >> 2); I2O_MESSAGE_FRAME_setInitiatorAddress (Message_Ptr, 1); return (Message_Ptr); } /* ASR_fillMessage */ #define EMPTY_QUEUE ((U32)-1L) STATIC INLINE U32 ASR_getMessage( IN i2oRegs_t * virt) { OUT U32 MessageOffset; if ((MessageOffset = virt->ToFIFO) == EMPTY_QUEUE) { MessageOffset = virt->ToFIFO; } return (MessageOffset); } /* ASR_getMessage */ /* Issue a polled command */ STATIC U32 ASR_initiateCp ( INOUT i2oRegs_t * virt, IN PI2O_MESSAGE_FRAME Message) { OUT U32 Mask = -1L; U32 MessageOffset; u_int Delay = 1500; /* * ASR_initiateCp is only used for synchronous commands and will * be made more resiliant to adapter delays since commands like * resetIOP can cause the adapter to be deaf for a little time. */ while (((MessageOffset = ASR_getMessage(virt)) == EMPTY_QUEUE) && (--Delay != 0)) { DELAY (10000); } if (MessageOffset != EMPTY_QUEUE) { bcopy (Message, virt->Address + MessageOffset, I2O_MESSAGE_FRAME_getMessageSize(Message) << 2); /* * Disable the Interrupts */ virt->Mask = (Mask = virt->Mask) | Mask_InterruptsDisabled; virt->ToFIFO = MessageOffset; } return (Mask); } /* ASR_initiateCp */ /* * Reset the adapter. */ STATIC U32 ASR_resetIOP ( INOUT i2oRegs_t * virt) { struct resetMessage { I2O_EXEC_IOP_RESET_MESSAGE M; U32 R; }; defAlignLong(struct resetMessage,Message); PI2O_EXEC_IOP_RESET_MESSAGE Message_Ptr; OUT U32 * volatile Reply_Ptr; U32 Old; /* * Build up our copy of the Message. */ Message_Ptr = (PI2O_EXEC_IOP_RESET_MESSAGE)ASR_fillMessage(Message, sizeof(I2O_EXEC_IOP_RESET_MESSAGE)); I2O_EXEC_IOP_RESET_MESSAGE_setFunction(Message_Ptr, I2O_EXEC_IOP_RESET); /* * Reset the Reply Status */ *(Reply_Ptr = (U32 *)((char *)Message_Ptr + sizeof(I2O_EXEC_IOP_RESET_MESSAGE))) = 0; I2O_EXEC_IOP_RESET_MESSAGE_setStatusWordLowAddress(Message_Ptr, KVTOPHYS((void *)Reply_Ptr)); /* * Send the Message out */ if ((Old = ASR_initiateCp (virt, (PI2O_MESSAGE_FRAME)Message_Ptr)) != (U32)-1L) { /* * Wait for a response (Poll), timeouts are dangerous if * the card is truly responsive. We assume response in 2s. */ u_int8_t Delay = 200; while ((*Reply_Ptr == 0) && (--Delay != 0)) { DELAY (10000); } /* * Re-enable the interrupts. */ virt->Mask = Old; ASSERT (*Reply_Ptr); return (*Reply_Ptr); } ASSERT (Old != (U32)-1L); return (0); } /* ASR_resetIOP */ /* * Get the curent state of the adapter */ STATIC INLINE PI2O_EXEC_STATUS_GET_REPLY ASR_getStatus ( INOUT i2oRegs_t * virt, OUT PI2O_EXEC_STATUS_GET_REPLY buffer) { defAlignLong(I2O_EXEC_STATUS_GET_MESSAGE,Message); PI2O_EXEC_STATUS_GET_MESSAGE Message_Ptr; U32 Old; /* * Build up our copy of the Message. */ Message_Ptr = (PI2O_EXEC_STATUS_GET_MESSAGE)ASR_fillMessage(Message, sizeof(I2O_EXEC_STATUS_GET_MESSAGE)); I2O_EXEC_STATUS_GET_MESSAGE_setFunction(Message_Ptr, I2O_EXEC_STATUS_GET); I2O_EXEC_STATUS_GET_MESSAGE_setReplyBufferAddressLow(Message_Ptr, KVTOPHYS((void *)buffer)); /* This one is a Byte Count */ I2O_EXEC_STATUS_GET_MESSAGE_setReplyBufferLength(Message_Ptr, sizeof(I2O_EXEC_STATUS_GET_REPLY)); /* * Reset the Reply Status */ bzero ((void *)buffer, sizeof(I2O_EXEC_STATUS_GET_REPLY)); /* * Send the Message out */ if ((Old = ASR_initiateCp (virt, (PI2O_MESSAGE_FRAME)Message_Ptr)) != (U32)-1L) { /* * Wait for a response (Poll), timeouts are dangerous if * the card is truly responsive. We assume response in 50ms. */ u_int8_t Delay = 50; while (*((U8 * volatile)&buffer->SyncByte) == 0) { if (--Delay == 0) { buffer = (PI2O_EXEC_STATUS_GET_REPLY)NULL; break; } DELAY (1000); } /* * Re-enable the interrupts. */ virt->Mask = Old; return (buffer); } return ((PI2O_EXEC_STATUS_GET_REPLY)NULL); } /* ASR_getStatus */ /* * Check if the device is a SCSI I2O HBA, and add it to the list. */ /* * Probe for ASR controller. If we find it, we will use it. * virtual adapters. */ STATIC PROBE_RET asr_probe(PROBE_ARGS) { PROBE_SET(); if (id == 0xA5011044) { PROBE_RETURN ("Adaptec Caching SCSI RAID"); } PROBE_RETURN (NULL); } /* asr_probe */ /* * Probe/Attach for DOMINO chipset. */ STATIC PROBE_RET domino_probe(PROBE_ARGS) { PROBE_SET(); if (id == 0x10121044) { PROBE_RETURN ("Adaptec Caching Memory Controller"); } PROBE_RETURN (NULL); } /* domino_probe */ STATIC ATTACH_RET domino_attach (ATTACH_ARGS) { ATTACH_RETURN (0); } /* domino_attach */ /* * Probe/Attach for MODE0 adapters. */ STATIC PROBE_RET mode0_probe(PROBE_ARGS) { PROBE_SET(); if (id == 0x908010B5) { PROBE_RETURN ("Adaptec Mode0 3xxx"); } #if 0 /* this would match any generic i960 -- mjs */ if (id == 0x19608086) { PROBE_RETURN ("Adaptec Mode0 1xxx"); } #endif PROBE_RETURN (NULL); } /* mode0_probe */ STATIC ATTACH_RET mode0_attach (ATTACH_ARGS) { ATTACH_RETURN (0); } /* mode0_attach */ STATIC INLINE union asr_ccb * asr_alloc_ccb ( IN Asr_softc_t * sc) { OUT union asr_ccb * new_ccb; if ((new_ccb = (union asr_ccb *)malloc(sizeof(*new_ccb), M_DEVBUF, M_WAITOK | M_ZERO)) != (union asr_ccb *)NULL) { new_ccb->ccb_h.pinfo.priority = 1; new_ccb->ccb_h.pinfo.index = CAM_UNQUEUED_INDEX; new_ccb->ccb_h.spriv_ptr0 = sc; } return (new_ccb); } /* asr_alloc_ccb */ STATIC INLINE void asr_free_ccb ( IN union asr_ccb * free_ccb) { free(free_ccb, M_DEVBUF); } /* asr_free_ccb */ /* * Print inquiry data `carefully' */ STATIC void ASR_prstring ( u_int8_t * s, int len) { while ((--len >= 0) && (*s) && (*s != ' ') && (*s != '-')) { printf ("%c", *(s++)); } } /* ASR_prstring */ /* * Prototypes */ STATIC INLINE int ASR_queue __P(( IN Asr_softc_t * sc, IN PI2O_MESSAGE_FRAME Message)); /* * Send a message synchronously and without Interrupt to a ccb. */ STATIC int ASR_queue_s ( INOUT union asr_ccb * ccb, IN PI2O_MESSAGE_FRAME Message) { int s; U32 Mask; Asr_softc_t * sc = (Asr_softc_t *)(ccb->ccb_h.spriv_ptr0); /* * We do not need any (optional byteswapping) method access to * the Initiator context field. */ I2O_MESSAGE_FRAME_setInitiatorContext64(Message, (long)ccb); /* Prevent interrupt service */ s = splcam (); sc->ha_Virt->Mask = (Mask = sc->ha_Virt->Mask) | Mask_InterruptsDisabled; if (ASR_queue (sc, Message) == EMPTY_QUEUE) { ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_REQUEUE_REQ; } /* * Wait for this board to report a finished instruction. */ while (ccb->ccb_h.status == CAM_REQ_INPROG) { (void)asr_intr (sc); } /* Re-enable Interrupts */ sc->ha_Virt->Mask = Mask; splx(s); return (ccb->ccb_h.status); } /* ASR_queue_s */ /* * Send a message synchronously to a Asr_softc_t */ STATIC int ASR_queue_c ( IN Asr_softc_t * sc, IN PI2O_MESSAGE_FRAME Message) { union asr_ccb * ccb; OUT int status; if ((ccb = asr_alloc_ccb (sc)) == (union asr_ccb *)NULL) { return (CAM_REQUEUE_REQ); } status = ASR_queue_s (ccb, Message); asr_free_ccb(ccb); return (status); } /* ASR_queue_c */ /* * Add the specified ccb to the active queue */ STATIC INLINE void ASR_ccbAdd ( IN Asr_softc_t * sc, INOUT union asr_ccb * ccb) { int s; s = splcam(); LIST_INSERT_HEAD(&(sc->ha_ccb), &(ccb->ccb_h), sim_links.le); if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) { if (ccb->ccb_h.timeout == CAM_TIME_DEFAULT) { /* * RAID systems can take considerable time to * complete some commands given the large cache * flashes switching from write back to write thru. */ ccb->ccb_h.timeout = 6 * 60 * 1000; } ccb->ccb_h.timeout_ch = timeout(asr_timeout, (caddr_t)ccb, (ccb->ccb_h.timeout * hz) / 1000); } splx(s); } /* ASR_ccbAdd */ /* * Remove the specified ccb from the active queue. */ STATIC INLINE void ASR_ccbRemove ( IN Asr_softc_t * sc, INOUT union asr_ccb * ccb) { int s; s = splcam(); untimeout(asr_timeout, (caddr_t)ccb, ccb->ccb_h.timeout_ch); LIST_REMOVE(&ccb->ccb_h, sim_links.le); splx(s); } /* ASR_ccbRemove */ /* * Fail all the active commands, so they get re-issued by the operating * system. */ STATIC INLINE void ASR_failActiveCommands ( IN Asr_softc_t * sc) { struct ccb_hdr * ccb; defAlignLong(I2O_EXEC_LCT_NOTIFY_MESSAGE,Message); PI2O_EXEC_LCT_NOTIFY_MESSAGE Message_Ptr; int s; /* Send a blind LCT command to wait for the enableSys to complete */ Message_Ptr = (PI2O_EXEC_LCT_NOTIFY_MESSAGE)ASR_fillMessage(Message, sizeof(I2O_EXEC_LCT_NOTIFY_MESSAGE) - sizeof(I2O_SG_ELEMENT)); I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame), I2O_EXEC_LCT_NOTIFY); I2O_EXEC_LCT_NOTIFY_MESSAGE_setClassIdentifier(Message_Ptr, I2O_CLASS_MATCH_ANYCLASS); (void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr); s = splcam(); LIST_FOREACH(ccb, &(sc->ha_ccb), sim_links.le) { ASR_ccbRemove (sc, (union asr_ccb *)ccb); ccb->status &= ~CAM_STATUS_MASK; ccb->status |= CAM_REQUEUE_REQ; ((struct ccb_scsiio *)ccb)->resid = ((struct ccb_scsiio *)ccb)->dxfer_len; if (ccb->path) { xpt_done ((union ccb *)ccb); } else { wakeup ((caddr_t)ccb); } } splx(s); } /* ASR_failActiveCommands */ /* * The following command causes the HBA to reset the specific bus */ STATIC INLINE void ASR_resetBus( IN Asr_softc_t * sc, IN int bus) { defAlignLong(I2O_HBA_BUS_RESET_MESSAGE,Message); I2O_HBA_BUS_RESET_MESSAGE * Message_Ptr; PI2O_LCT_ENTRY Device; Message_Ptr = (I2O_HBA_BUS_RESET_MESSAGE *)ASR_fillMessage(Message, sizeof(I2O_HBA_BUS_RESET_MESSAGE)); I2O_MESSAGE_FRAME_setFunction(&Message_Ptr->StdMessageFrame, I2O_HBA_BUS_RESET); for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY) (((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT)); ++Device) { if (((Device->le_type & I2O_PORT) != 0) && (Device->le_bus == bus)) { I2O_MESSAGE_FRAME_setTargetAddress( &Message_Ptr->StdMessageFrame, I2O_LCT_ENTRY_getLocalTID(Device)); /* Asynchronous command, with no expectations */ (void)ASR_queue(sc, (PI2O_MESSAGE_FRAME)Message_Ptr); break; } } } /* ASR_resetBus */ STATIC INLINE int ASR_getBlinkLedCode ( IN Asr_softc_t * sc) { if ((sc != (Asr_softc_t *)NULL) && (sc->ha_blinkLED != (u_int8_t *)NULL) && (sc->ha_blinkLED[1] == 0xBC)) { return (sc->ha_blinkLED[0]); } return (0); } /* ASR_getBlinkCode */ /* * Determine the address of an TID lookup. Must be done at high priority * since the address can be changed by other threads of execution. * * Returns NULL pointer if not indexible (but will attempt to generate * an index if `new_entry' flag is set to TRUE). * * All addressible entries are to be guaranteed zero if never initialized. */ STATIC INLINE tid_t * ASR_getTidAddress( INOUT Asr_softc_t * sc, IN int bus, IN int target, IN int lun, IN int new_entry) { target2lun_t * bus_ptr; lun2tid_t * target_ptr; unsigned new_size; /* * Validity checking of incoming parameters. More of a bound * expansion limit than an issue with the code dealing with the * values. * * sc must be valid before it gets here, so that check could be * dropped if speed a critical issue. */ if ((sc == (Asr_softc_t *)NULL) || (bus > MAX_CHANNEL) || (target > sc->ha_MaxId) || (lun > sc->ha_MaxLun)) { debug_asr_printf("(%lx,%d,%d,%d) target out of range\n", (u_long)sc, bus, target, lun); return ((tid_t *)NULL); } /* * See if there is an associated bus list. * * for performance, allocate in size of BUS_CHUNK chunks. * BUS_CHUNK must be a power of two. This is to reduce * fragmentation effects on the allocations. */ # define BUS_CHUNK 8 new_size = ((target + BUS_CHUNK - 1) & ~(BUS_CHUNK - 1)); if ((bus_ptr = sc->ha_targets[bus]) == (target2lun_t *)NULL) { /* * Allocate a new structure? * Since one element in structure, the +1 * needed for size has been abstracted. */ if ((new_entry == FALSE) || ((sc->ha_targets[bus] = bus_ptr = (target2lun_t *)malloc ( sizeof(*bus_ptr) + (sizeof(bus_ptr->LUN) * new_size), M_TEMP, M_WAITOK | M_ZERO)) == (target2lun_t *)NULL)) { debug_asr_printf("failed to allocate bus list\n"); return ((tid_t *)NULL); } bus_ptr->size = new_size + 1; } else if (bus_ptr->size <= new_size) { target2lun_t * new_bus_ptr; /* * Reallocate a new structure? * Since one element in structure, the +1 * needed for size has been abstracted. */ if ((new_entry == FALSE) || ((new_bus_ptr = (target2lun_t *)malloc ( sizeof(*bus_ptr) + (sizeof(bus_ptr->LUN) * new_size), M_TEMP, M_WAITOK | M_ZERO)) == (target2lun_t *)NULL)) { debug_asr_printf("failed to reallocate bus list\n"); return ((tid_t *)NULL); } /* * Copy the whole thing, safer, simpler coding * and not really performance critical at this point. */ bcopy (bus_ptr, new_bus_ptr, sizeof(*bus_ptr) + (sizeof(bus_ptr->LUN) * (bus_ptr->size - 1))); sc->ha_targets[bus] = new_bus_ptr; free (bus_ptr, M_TEMP); bus_ptr = new_bus_ptr; bus_ptr->size = new_size + 1; } /* * We now have the bus list, lets get to the target list. * Since most systems have only *one* lun, we do not allocate * in chunks as above, here we allow one, then in chunk sizes. * TARGET_CHUNK must be a power of two. This is to reduce * fragmentation effects on the allocations. */ # define TARGET_CHUNK 8 if ((new_size = lun) != 0) { new_size = ((lun + TARGET_CHUNK - 1) & ~(TARGET_CHUNK - 1)); } if ((target_ptr = bus_ptr->LUN[target]) == (lun2tid_t *)NULL) { /* * Allocate a new structure? * Since one element in structure, the +1 * needed for size has been abstracted. */ if ((new_entry == FALSE) || ((bus_ptr->LUN[target] = target_ptr = (lun2tid_t *)malloc ( sizeof(*target_ptr) + (sizeof(target_ptr->TID) * new_size), M_TEMP, M_WAITOK | M_ZERO)) == (lun2tid_t *)NULL)) { debug_asr_printf("failed to allocate target list\n"); return ((tid_t *)NULL); } target_ptr->size = new_size + 1; } else if (target_ptr->size <= new_size) { lun2tid_t * new_target_ptr; /* * Reallocate a new structure? * Since one element in structure, the +1 * needed for size has been abstracted. */ if ((new_entry == FALSE) || ((new_target_ptr = (lun2tid_t *)malloc ( sizeof(*target_ptr) + (sizeof(target_ptr->TID) * new_size), M_TEMP, M_WAITOK | M_ZERO)) == (lun2tid_t *)NULL)) { debug_asr_printf("failed to reallocate target list\n"); return ((tid_t *)NULL); } /* * Copy the whole thing, safer, simpler coding * and not really performance critical at this point. */ bcopy (target_ptr, new_target_ptr, sizeof(*target_ptr) + (sizeof(target_ptr->TID) * (target_ptr->size - 1))); bus_ptr->LUN[target] = new_target_ptr; free (target_ptr, M_TEMP); target_ptr = new_target_ptr; target_ptr->size = new_size + 1; } /* * Now, acquire the TID address from the LUN indexed list. */ return (&(target_ptr->TID[lun])); } /* ASR_getTidAddress */ /* * Get a pre-existing TID relationship. * * If the TID was never set, return (tid_t)-1. * * should use mutex rather than spl. */ STATIC INLINE tid_t ASR_getTid ( IN Asr_softc_t * sc, IN int bus, IN int target, IN int lun) { tid_t * tid_ptr; int s; OUT tid_t retval; s = splcam(); if (((tid_ptr = ASR_getTidAddress (sc, bus, target, lun, FALSE)) == (tid_t *)NULL) /* (tid_t)0 or (tid_t)-1 indicate no TID */ || (*tid_ptr == (tid_t)0)) { splx(s); return ((tid_t)-1); } retval = *tid_ptr; splx(s); return (retval); } /* ASR_getTid */ /* * Set a TID relationship. * * If the TID was not set, return (tid_t)-1. * * should use mutex rather than spl. */ STATIC INLINE tid_t ASR_setTid ( INOUT Asr_softc_t * sc, IN int bus, IN int target, IN int lun, INOUT tid_t TID) { tid_t * tid_ptr; int s; if (TID != (tid_t)-1) { if (TID == 0) { return ((tid_t)-1); } s = splcam(); if ((tid_ptr = ASR_getTidAddress (sc, bus, target, lun, TRUE)) == (tid_t *)NULL) { splx(s); return ((tid_t)-1); } *tid_ptr = TID; splx(s); } return (TID); } /* ASR_setTid */ /*-------------------------------------------------------------------------*/ /* Function ASR_rescan */ /*-------------------------------------------------------------------------*/ /* The Parameters Passed To This Function Are : */ /* Asr_softc_t * : HBA miniport driver's adapter data storage. */ /* */ /* This Function Will rescan the adapter and resynchronize any data */ /* */ /* Return : 0 For OK, Error Code Otherwise */ /*-------------------------------------------------------------------------*/ STATIC INLINE int ASR_rescan( IN Asr_softc_t * sc) { int bus; OUT int error; /* * Re-acquire the LCT table and synchronize us to the adapter. */ if ((error = ASR_acquireLct(sc)) == 0) { error = ASR_acquireHrt(sc); } if (error != 0) { return error; } bus = sc->ha_MaxBus; /* Reset all existing cached TID lookups */ do { int target; /* * Scan for all targets on this bus to see if they * got affected by the rescan. */ for (target = 0; target <= sc->ha_MaxId; ++target) { int lun; for (lun = 0; lun <= sc->ha_MaxLun; ++lun) { PI2O_LCT_ENTRY Device; tid_t TID = (tid_t)-1; /* * See if the cached TID changed. Search for * the device in our new LCT. */ for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)(((U32 *)sc->ha_LCT) + I2O_LCT_getTableSize(sc->ha_LCT)); ++Device) { if ((Device->le_type != I2O_UNKNOWN) && (Device->le_bus == bus) && (Device->le_target == target) && (Device->le_lun == lun) && (I2O_LCT_ENTRY_getUserTID(Device) == 0xFFF)) { TID = I2O_LCT_ENTRY_getLocalTID( Device); break; } } /* * Indicate to the OS that the label needs * to be recalculated, or that the specific * open device is no longer valid (Merde) * because the cached TID changed. * ASR_getTid (sc, bus, target, lun) != TI */ /* * We have the option of clearing the * cached TID for it to be rescanned, or to * set it now even if the device never got * accessed. We chose the later since we * currently do not use the condition that * the TID ever got cached. */ ASR_setTid (sc, bus, target, lun, TID); } } } while (--bus >= 0); return (error); } /* ASR_rescan */ /*-------------------------------------------------------------------------*/ /* Function ASR_reset */ /*-------------------------------------------------------------------------*/ /* The Parameters Passed To This Function Are : */ /* Asr_softc_t * : HBA miniport driver's adapter data storage. */ /* */ /* This Function Will reset the adapter and resynchronize any data */ /* */ /* Return : None */ /*-------------------------------------------------------------------------*/ STATIC INLINE void ASR_reset( IN Asr_softc_t * sc) { (void)ASR_resetIOP (sc->ha_Virt); (void)ASR_init (sc); (void)ASR_rescan (sc); (void)ASR_failActiveCommands (sc); } /* ASR_reset */ /* * Device timeout handler. */ STATIC void asr_timeout( INOUT void * arg) { union asr_ccb * ccb = (union asr_ccb *)arg; Asr_softc_t * sc = (Asr_softc_t *)(ccb->ccb_h.spriv_ptr0); int s; debug_asr_print_path(ccb); debug_asr_printf("timed out"); /* * Check if the adapter has locked up? */ if ((s = ASR_getBlinkLedCode(sc)) != 0) { debug_asr_printf ( " due to adapter blinkled code %x\nresetting adapter\n", s); ASR_reset (sc); return; } /* * Abort does not function on the ASR card!!! Walking away from * the SCSI command is also *very* dangerous. A SCSI BUS reset is * our best bet, followed by a complete adapter reset if that fails. */ s = splcam(); if (ccb->ccb_h.status == CAM_CMD_TIMEOUT) { debug_asr_printf (" AGAIN\nreinitializing adapter\n"); ASR_reset (sc); splx(s); return; } debug_asr_printf ("\nresetting bus\n"); /* If the BUS reset does not take, then an adapter reset is next! */ ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_CMD_TIMEOUT; ccb->ccb_h.timeout_ch = timeout(asr_timeout, (caddr_t)ccb, (ccb->ccb_h.timeout * hz) / 1000); ASR_resetBus (sc, cam_sim_bus(xpt_path_sim(ccb->ccb_h.path))); splx(s); } /* asr_timeout */ /* * send a message asynchronously */ STATIC INLINE int ASR_queue( IN Asr_softc_t * sc, IN PI2O_MESSAGE_FRAME Message) { OUT U32 MessageOffset; union asr_ccb * ccb; debug_asr_printf ("Host Command Dump:\n"); debug_asr_dump_message (Message); /* * Limit the number of Messages sent to this HBA. Better to sleep, * than to hardware loop like a nut! By limiting the number of * messages to an individual HBA here, we manage to perform all * the processing of the message ready to drop the next one into * the controller. We could limit the messages we are allowed to * take, but that may have a performance hit. */ ccb = (union asr_ccb *)(long) I2O_MESSAGE_FRAME_getInitiatorContext64(Message); if (((MessageOffset = ASR_getMessage(sc->ha_Virt)) != EMPTY_QUEUE) || ((MessageOffset = ASR_getMessage(sc->ha_Virt)) != EMPTY_QUEUE)) { #ifdef ASR_MEASURE_PERFORMANCE int startTimeIndex; if (ccb) { ++sc->ha_performance.command_count[ (int) ccb->csio.cdb_io.cdb_bytes[0]]; DEQ_TIMEQ_FREE_LIST(startTimeIndex, sc->ha_timeQFreeList, sc->ha_timeQFreeHead, sc->ha_timeQFreeTail); if (-1 != startTimeIndex) { microtime(&sc->ha_timeQ[startTimeIndex]); } /* Time stamp the command before we send it out */ ((PRIVATE_SCSI_SCB_EXECUTE_MESSAGE *) Message)-> PrivateMessageFrame.TransactionContext = (I2O_TRANSACTION_CONTEXT) startTimeIndex; ++sc->ha_submitted_ccbs_count; if (sc->ha_performance.max_submit_count < sc->ha_submitted_ccbs_count) { sc->ha_performance.max_submit_count = sc->ha_submitted_ccbs_count; } } #endif bcopy (Message, sc->ha_Virt->Address + MessageOffset, I2O_MESSAGE_FRAME_getMessageSize(Message) << 2); if (ccb) { ASR_ccbAdd (sc, ccb); } /* Post the command */ sc->ha_Virt->ToFIFO = MessageOffset; } else { if (ASR_getBlinkLedCode(sc)) { ASR_reset (sc); } } return (MessageOffset); } /* ASR_queue */ /* Simple Scatter Gather elements */ #define SG(SGL,Index,Flags,Buffer,Size) \ I2O_FLAGS_COUNT_setCount( \ &(((PI2O_SG_ELEMENT)(SGL))->u.Simple[Index].FlagsCount), \ Size); \ I2O_FLAGS_COUNT_setFlags( \ &(((PI2O_SG_ELEMENT)(SGL))->u.Simple[Index].FlagsCount), \ I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT | (Flags)); \ I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress( \ &(((PI2O_SG_ELEMENT)(SGL))->u.Simple[Index]), \ (Buffer == NULL) ? NULL : KVTOPHYS(Buffer)) /* * Retrieve Parameter Group. * Buffer must be allocated using defAlignLong macro. */ STATIC void * ASR_getParams( IN Asr_softc_t * sc, IN tid_t TID, IN int Group, OUT void * Buffer, IN unsigned BufferSize) { struct paramGetMessage { I2O_UTIL_PARAMS_GET_MESSAGE M; char F[ sizeof(I2O_SGE_SIMPLE_ELEMENT)*2 - sizeof(I2O_SG_ELEMENT)]; struct Operations { I2O_PARAM_OPERATIONS_LIST_HEADER Header; I2O_PARAM_OPERATION_ALL_TEMPLATE Template[1]; } O; }; defAlignLong(struct paramGetMessage, Message); struct Operations * Operations_Ptr; I2O_UTIL_PARAMS_GET_MESSAGE * Message_Ptr; struct ParamBuffer { I2O_PARAM_RESULTS_LIST_HEADER Header; I2O_PARAM_READ_OPERATION_RESULT Read; char Info[1]; } * Buffer_Ptr; Message_Ptr = (I2O_UTIL_PARAMS_GET_MESSAGE *)ASR_fillMessage(Message, sizeof(I2O_UTIL_PARAMS_GET_MESSAGE) + sizeof(I2O_SGE_SIMPLE_ELEMENT)*2 - sizeof(I2O_SG_ELEMENT)); Operations_Ptr = (struct Operations *)((char *)Message_Ptr + sizeof(I2O_UTIL_PARAMS_GET_MESSAGE) + sizeof(I2O_SGE_SIMPLE_ELEMENT)*2 - sizeof(I2O_SG_ELEMENT)); bzero ((void *)Operations_Ptr, sizeof(struct Operations)); I2O_PARAM_OPERATIONS_LIST_HEADER_setOperationCount( &(Operations_Ptr->Header), 1); I2O_PARAM_OPERATION_ALL_TEMPLATE_setOperation( &(Operations_Ptr->Template[0]), I2O_PARAMS_OPERATION_FIELD_GET); I2O_PARAM_OPERATION_ALL_TEMPLATE_setFieldCount( &(Operations_Ptr->Template[0]), 0xFFFF); I2O_PARAM_OPERATION_ALL_TEMPLATE_setGroupNumber( &(Operations_Ptr->Template[0]), Group); bzero ((void *)(Buffer_Ptr = getAlignLong(struct ParamBuffer, Buffer)), BufferSize); I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame), I2O_VERSION_11 + (((sizeof(I2O_UTIL_PARAMS_GET_MESSAGE) - sizeof(I2O_SG_ELEMENT)) / sizeof(U32)) << 4)); I2O_MESSAGE_FRAME_setTargetAddress (&(Message_Ptr->StdMessageFrame), TID); I2O_MESSAGE_FRAME_setFunction (&(Message_Ptr->StdMessageFrame), I2O_UTIL_PARAMS_GET); /* * Set up the buffers as scatter gather elements. */ SG(&(Message_Ptr->SGL), 0, I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_END_OF_BUFFER, Operations_Ptr, sizeof(struct Operations)); SG(&(Message_Ptr->SGL), 1, I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER, Buffer_Ptr, BufferSize); if ((ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr) == CAM_REQ_CMP) && (Buffer_Ptr->Header.ResultCount)) { return ((void *)(Buffer_Ptr->Info)); } return ((void *)NULL); } /* ASR_getParams */ /* * Acquire the LCT information. */ STATIC INLINE int ASR_acquireLct ( INOUT Asr_softc_t * sc) { PI2O_EXEC_LCT_NOTIFY_MESSAGE Message_Ptr; PI2O_SGE_SIMPLE_ELEMENT sg; int MessageSizeInBytes; caddr_t v; int len; I2O_LCT Table; PI2O_LCT_ENTRY Entry; /* * sc value assumed valid */ MessageSizeInBytes = sizeof(I2O_EXEC_LCT_NOTIFY_MESSAGE) - sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT); if ((Message_Ptr = (PI2O_EXEC_LCT_NOTIFY_MESSAGE)malloc ( MessageSizeInBytes, M_TEMP, M_WAITOK)) == (PI2O_EXEC_LCT_NOTIFY_MESSAGE)NULL) { return (ENOMEM); } (void)ASR_fillMessage((char *)Message_Ptr, MessageSizeInBytes); I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame), (I2O_VERSION_11 + (((sizeof(I2O_EXEC_LCT_NOTIFY_MESSAGE) - sizeof(I2O_SG_ELEMENT)) / sizeof(U32)) << 4))); I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame), I2O_EXEC_LCT_NOTIFY); I2O_EXEC_LCT_NOTIFY_MESSAGE_setClassIdentifier(Message_Ptr, I2O_CLASS_MATCH_ANYCLASS); /* * Call the LCT table to determine the number of device entries * to reserve space for. */ SG(&(Message_Ptr->SGL), 0, I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER, &Table, sizeof(I2O_LCT)); /* * since this code is reused in several systems, code efficiency * is greater by using a shift operation rather than a divide by * sizeof(u_int32_t). */ I2O_LCT_setTableSize(&Table, (sizeof(I2O_LCT) - sizeof(I2O_LCT_ENTRY)) >> 2); (void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr); /* * Determine the size of the LCT table. */ if (sc->ha_LCT) { free (sc->ha_LCT, M_TEMP); } /* * malloc only generates contiguous memory when less than a * page is expected. We must break the request up into an SG list ... */ if (((len = (I2O_LCT_getTableSize(&Table) << 2)) <= (sizeof(I2O_LCT) - sizeof(I2O_LCT_ENTRY))) || (len > (128 * 1024))) { /* Arbitrary */ free (Message_Ptr, M_TEMP); return (EINVAL); } if ((sc->ha_LCT = (PI2O_LCT)malloc (len, M_TEMP, M_WAITOK)) == (PI2O_LCT)NULL) { free (Message_Ptr, M_TEMP); return (ENOMEM); } /* * since this code is reused in several systems, code efficiency * is greater by using a shift operation rather than a divide by * sizeof(u_int32_t). */ I2O_LCT_setTableSize(sc->ha_LCT, (sizeof(I2O_LCT) - sizeof(I2O_LCT_ENTRY)) >> 2); /* * Convert the access to the LCT table into a SG list. */ sg = Message_Ptr->SGL.u.Simple; v = (caddr_t)(sc->ha_LCT); for (;;) { int next, base, span; span = 0; next = base = KVTOPHYS(v); I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(sg, base); /* How far can we go contiguously */ while ((len > 0) && (base == next)) { int size; next = trunc_page(base) + PAGE_SIZE; size = next - base; if (size > len) { size = len; } span += size; v += size; len -= size; base = KVTOPHYS(v); } /* Construct the Flags */ I2O_FLAGS_COUNT_setCount(&(sg->FlagsCount), span); { int rw = I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT; if (len <= 0) { rw = (I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT | I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER); } I2O_FLAGS_COUNT_setFlags(&(sg->FlagsCount), rw); } if (len <= 0) { break; } /* * Incrementing requires resizing of the packet. */ ++sg; MessageSizeInBytes += sizeof(*sg); I2O_MESSAGE_FRAME_setMessageSize( &(Message_Ptr->StdMessageFrame), I2O_MESSAGE_FRAME_getMessageSize( &(Message_Ptr->StdMessageFrame)) + (sizeof(*sg) / sizeof(U32))); { PI2O_EXEC_LCT_NOTIFY_MESSAGE NewMessage_Ptr; if ((NewMessage_Ptr = (PI2O_EXEC_LCT_NOTIFY_MESSAGE) malloc (MessageSizeInBytes, M_TEMP, M_WAITOK)) == (PI2O_EXEC_LCT_NOTIFY_MESSAGE)NULL) { free (sc->ha_LCT, M_TEMP); sc->ha_LCT = (PI2O_LCT)NULL; free (Message_Ptr, M_TEMP); return (ENOMEM); } span = ((caddr_t)sg) - (caddr_t)Message_Ptr; bcopy ((caddr_t)Message_Ptr, (caddr_t)NewMessage_Ptr, span); free (Message_Ptr, M_TEMP); sg = (PI2O_SGE_SIMPLE_ELEMENT) (((caddr_t)NewMessage_Ptr) + span); Message_Ptr = NewMessage_Ptr; } } { int retval; retval = ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr); free (Message_Ptr, M_TEMP); if (retval != CAM_REQ_CMP) { return (ENODEV); } } /* If the LCT table grew, lets truncate accesses */ if (I2O_LCT_getTableSize(&Table) < I2O_LCT_getTableSize(sc->ha_LCT)) { I2O_LCT_setTableSize(sc->ha_LCT, I2O_LCT_getTableSize(&Table)); } for (Entry = sc->ha_LCT->LCTEntry; Entry < (PI2O_LCT_ENTRY) (((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT)); ++Entry) { Entry->le_type = I2O_UNKNOWN; switch (I2O_CLASS_ID_getClass(&(Entry->ClassID))) { case I2O_CLASS_RANDOM_BLOCK_STORAGE: Entry->le_type = I2O_BSA; break; case I2O_CLASS_SCSI_PERIPHERAL: Entry->le_type = I2O_SCSI; break; case I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL: Entry->le_type = I2O_FCA; break; case I2O_CLASS_BUS_ADAPTER_PORT: Entry->le_type = I2O_PORT | I2O_SCSI; /* FALLTHRU */ case I2O_CLASS_FIBRE_CHANNEL_PORT: if (I2O_CLASS_ID_getClass(&(Entry->ClassID)) == I2O_CLASS_FIBRE_CHANNEL_PORT) { Entry->le_type = I2O_PORT | I2O_FCA; } { struct ControllerInfo { I2O_PARAM_RESULTS_LIST_HEADER Header; I2O_PARAM_READ_OPERATION_RESULT Read; I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR Info; }; defAlignLong(struct ControllerInfo, Buffer); PI2O_HBA_SCSI_CONTROLLER_INFO_SCALAR Info; Entry->le_bus = 0xff; Entry->le_target = 0xff; Entry->le_lun = 0xff; if ((Info = (PI2O_HBA_SCSI_CONTROLLER_INFO_SCALAR) ASR_getParams(sc, I2O_LCT_ENTRY_getLocalTID(Entry), I2O_HBA_SCSI_CONTROLLER_INFO_GROUP_NO, Buffer, sizeof(struct ControllerInfo))) == (PI2O_HBA_SCSI_CONTROLLER_INFO_SCALAR)NULL) { continue; } Entry->le_target = I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getInitiatorID( Info); Entry->le_lun = 0; } /* FALLTHRU */ default: continue; } { struct DeviceInfo { I2O_PARAM_RESULTS_LIST_HEADER Header; I2O_PARAM_READ_OPERATION_RESULT Read; I2O_DPT_DEVICE_INFO_SCALAR Info; }; defAlignLong (struct DeviceInfo, Buffer); PI2O_DPT_DEVICE_INFO_SCALAR Info; Entry->le_bus = 0xff; Entry->le_target = 0xff; Entry->le_lun = 0xff; if ((Info = (PI2O_DPT_DEVICE_INFO_SCALAR) ASR_getParams(sc, I2O_LCT_ENTRY_getLocalTID(Entry), I2O_DPT_DEVICE_INFO_GROUP_NO, Buffer, sizeof(struct DeviceInfo))) == (PI2O_DPT_DEVICE_INFO_SCALAR)NULL) { continue; } Entry->le_type |= I2O_DPT_DEVICE_INFO_SCALAR_getDeviceType(Info); Entry->le_bus = I2O_DPT_DEVICE_INFO_SCALAR_getBus(Info); if ((Entry->le_bus > sc->ha_MaxBus) && (Entry->le_bus <= MAX_CHANNEL)) { sc->ha_MaxBus = Entry->le_bus; } Entry->le_target = I2O_DPT_DEVICE_INFO_SCALAR_getIdentifier(Info); Entry->le_lun = I2O_DPT_DEVICE_INFO_SCALAR_getLunInfo(Info); } } /* * A zero return value indicates success. */ return (0); } /* ASR_acquireLct */ /* * Initialize a message frame. * We assume that the CDB has already been set up, so all we do here is * generate the Scatter Gather list. */ STATIC INLINE PI2O_MESSAGE_FRAME ASR_init_message( IN union asr_ccb * ccb, OUT PI2O_MESSAGE_FRAME Message) { int next, span, base, rw; OUT PI2O_MESSAGE_FRAME Message_Ptr; Asr_softc_t * sc = (Asr_softc_t *)(ccb->ccb_h.spriv_ptr0); PI2O_SGE_SIMPLE_ELEMENT sg; caddr_t v; vm_size_t size, len; U32 MessageSize; /* We only need to zero out the PRIVATE_SCSI_SCB_EXECUTE_MESSAGE */ bzero (Message_Ptr = getAlignLong(I2O_MESSAGE_FRAME, Message), (sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT))); { int target = ccb->ccb_h.target_id; int lun = ccb->ccb_h.target_lun; int bus = cam_sim_bus(xpt_path_sim(ccb->ccb_h.path)); tid_t TID; if ((TID = ASR_getTid (sc, bus, target, lun)) == (tid_t)-1) { PI2O_LCT_ENTRY Device; TID = (tid_t)0; for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY) (((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT)); ++Device) { if ((Device->le_type != I2O_UNKNOWN) && (Device->le_bus == bus) && (Device->le_target == target) && (Device->le_lun == lun) && (I2O_LCT_ENTRY_getUserTID(Device) == 0xFFF)) { TID = I2O_LCT_ENTRY_getLocalTID(Device); ASR_setTid (sc, Device->le_bus, Device->le_target, Device->le_lun, TID); break; } } } if (TID == (tid_t)0) { return ((PI2O_MESSAGE_FRAME)NULL); } I2O_MESSAGE_FRAME_setTargetAddress(Message_Ptr, TID); PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setTID( (PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, TID); } I2O_MESSAGE_FRAME_setVersionOffset(Message_Ptr, I2O_VERSION_11 | (((sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT)) / sizeof(U32)) << 4)); I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr, (sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT)) / sizeof(U32)); I2O_MESSAGE_FRAME_setInitiatorAddress (Message_Ptr, 1); I2O_MESSAGE_FRAME_setFunction(Message_Ptr, I2O_PRIVATE_MESSAGE); I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode ( (PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, I2O_SCSI_SCB_EXEC); PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags ( (PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, I2O_SCB_FLAG_ENABLE_DISCONNECT | I2O_SCB_FLAG_SIMPLE_QUEUE_TAG | I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER); /* * We do not need any (optional byteswapping) method access to * the Initiator & Transaction context field. */ I2O_MESSAGE_FRAME_setInitiatorContext64(Message, (long)ccb); I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID( (PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, DPT_ORGANIZATION_ID); /* * copy the cdb over */ PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength( (PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, ccb->csio.cdb_len); bcopy (&(ccb->csio.cdb_io), ((PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr)->CDB, ccb->csio.cdb_len); /* * Given a buffer describing a transfer, set up a scatter/gather map * in a ccb to map that SCSI transfer. */ rw = (ccb->ccb_h.flags & CAM_DIR_IN) ? 0 : I2O_SGL_FLAGS_DIR; PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags ( (PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, (ccb->csio.dxfer_len) ? ((rw) ? (I2O_SCB_FLAG_XFER_TO_DEVICE | I2O_SCB_FLAG_ENABLE_DISCONNECT | I2O_SCB_FLAG_SIMPLE_QUEUE_TAG | I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER) : (I2O_SCB_FLAG_XFER_FROM_DEVICE | I2O_SCB_FLAG_ENABLE_DISCONNECT | I2O_SCB_FLAG_SIMPLE_QUEUE_TAG | I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER)) : (I2O_SCB_FLAG_ENABLE_DISCONNECT | I2O_SCB_FLAG_SIMPLE_QUEUE_TAG | I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER)); /* * Given a transfer described by a `data', fill in the SG list. */ sg = &((PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr)->SGL.u.Simple[0]; len = ccb->csio.dxfer_len; v = ccb->csio.data_ptr; ASSERT (ccb->csio.dxfer_len >= 0); MessageSize = I2O_MESSAGE_FRAME_getMessageSize(Message_Ptr); PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setByteCount( (PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, len); while ((len > 0) && (sg < &((PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE) Message_Ptr)->SGL.u.Simple[SG_SIZE])) { span = 0; next = base = KVTOPHYS(v); I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(sg, base); /* How far can we go contiguously */ while ((len > 0) && (base == next)) { next = trunc_page(base) + PAGE_SIZE; size = next - base; if (size > len) { size = len; } span += size; v += size; len -= size; base = KVTOPHYS(v); } I2O_FLAGS_COUNT_setCount(&(sg->FlagsCount), span); if (len == 0) { rw |= I2O_SGL_FLAGS_LAST_ELEMENT; } I2O_FLAGS_COUNT_setFlags(&(sg->FlagsCount), I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT | rw); ++sg; MessageSize += sizeof(*sg) / sizeof(U32); } /* We always do the request sense ... */ if ((span = ccb->csio.sense_len) == 0) { span = sizeof(ccb->csio.sense_data); } SG(sg, 0, I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER, &(ccb->csio.sense_data), span); I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr, MessageSize + (sizeof(*sg) / sizeof(U32))); return (Message_Ptr); } /* ASR_init_message */ /* * Reset the adapter. */ STATIC INLINE U32 ASR_initOutBound ( INOUT Asr_softc_t * sc) { struct initOutBoundMessage { I2O_EXEC_OUTBOUND_INIT_MESSAGE M; U32 R; }; defAlignLong(struct initOutBoundMessage,Message); PI2O_EXEC_OUTBOUND_INIT_MESSAGE Message_Ptr; OUT U32 * volatile Reply_Ptr; U32 Old; /* * Build up our copy of the Message. */ Message_Ptr = (PI2O_EXEC_OUTBOUND_INIT_MESSAGE)ASR_fillMessage(Message, sizeof(I2O_EXEC_OUTBOUND_INIT_MESSAGE)); I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame), I2O_EXEC_OUTBOUND_INIT); I2O_EXEC_OUTBOUND_INIT_MESSAGE_setHostPageFrameSize(Message_Ptr, PAGE_SIZE); I2O_EXEC_OUTBOUND_INIT_MESSAGE_setOutboundMFrameSize(Message_Ptr, sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)); /* * Reset the Reply Status */ *(Reply_Ptr = (U32 *)((char *)Message_Ptr + sizeof(I2O_EXEC_OUTBOUND_INIT_MESSAGE))) = 0; SG (&(Message_Ptr->SGL), 0, I2O_SGL_FLAGS_LAST_ELEMENT, Reply_Ptr, sizeof(U32)); /* * Send the Message out */ if ((Old = ASR_initiateCp (sc->ha_Virt, (PI2O_MESSAGE_FRAME)Message_Ptr)) != (U32)-1L) { u_long size, addr; /* * Wait for a response (Poll). */ while (*Reply_Ptr < I2O_EXEC_OUTBOUND_INIT_REJECTED); /* * Re-enable the interrupts. */ sc->ha_Virt->Mask = Old; /* * Populate the outbound table. */ if (sc->ha_Msgs == (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) { /* Allocate the reply frames */ size = sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME) * sc->ha_Msgs_Count; /* * contigmalloc only works reliably at * initialization time. */ if ((sc->ha_Msgs = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME) contigmalloc (size, M_DEVBUF, M_WAITOK, 0ul, 0xFFFFFFFFul, (u_long)sizeof(U32), 0ul)) != (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) { (void)bzero ((char *)sc->ha_Msgs, size); sc->ha_Msgs_Phys = KVTOPHYS(sc->ha_Msgs); } } /* Initialize the outbound FIFO */ if (sc->ha_Msgs != (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) for (size = sc->ha_Msgs_Count, addr = sc->ha_Msgs_Phys; size; --size) { sc->ha_Virt->FromFIFO = addr; addr += sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME); } return (*Reply_Ptr); } return (0); } /* ASR_initOutBound */ /* * Set the system table */ STATIC INLINE int ASR_setSysTab( IN Asr_softc_t * sc) { PI2O_EXEC_SYS_TAB_SET_MESSAGE Message_Ptr; PI2O_SET_SYSTAB_HEADER SystemTable; Asr_softc_t * ha; PI2O_SGE_SIMPLE_ELEMENT sg; int retVal; if ((SystemTable = (PI2O_SET_SYSTAB_HEADER)malloc ( sizeof(I2O_SET_SYSTAB_HEADER), M_TEMP, M_WAITOK | M_ZERO)) == (PI2O_SET_SYSTAB_HEADER)NULL) { return (ENOMEM); } for (ha = Asr_softc; ha; ha = ha->ha_next) { ++SystemTable->NumberEntries; } if ((Message_Ptr = (PI2O_EXEC_SYS_TAB_SET_MESSAGE)malloc ( sizeof(I2O_EXEC_SYS_TAB_SET_MESSAGE) - sizeof(I2O_SG_ELEMENT) + ((3+SystemTable->NumberEntries) * sizeof(I2O_SGE_SIMPLE_ELEMENT)), M_TEMP, M_WAITOK)) == (PI2O_EXEC_SYS_TAB_SET_MESSAGE)NULL) { free (SystemTable, M_TEMP); return (ENOMEM); } (void)ASR_fillMessage((char *)Message_Ptr, sizeof(I2O_EXEC_SYS_TAB_SET_MESSAGE) - sizeof(I2O_SG_ELEMENT) + ((3+SystemTable->NumberEntries) * sizeof(I2O_SGE_SIMPLE_ELEMENT))); I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame), (I2O_VERSION_11 + (((sizeof(I2O_EXEC_SYS_TAB_SET_MESSAGE) - sizeof(I2O_SG_ELEMENT)) / sizeof(U32)) << 4))); I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame), I2O_EXEC_SYS_TAB_SET); /* * Call the LCT table to determine the number of device entries * to reserve space for. * since this code is reused in several systems, code efficiency * is greater by using a shift operation rather than a divide by * sizeof(u_int32_t). */ sg = (PI2O_SGE_SIMPLE_ELEMENT)((char *)Message_Ptr + ((I2O_MESSAGE_FRAME_getVersionOffset( &(Message_Ptr->StdMessageFrame)) & 0xF0) >> 2)); SG(sg, 0, I2O_SGL_FLAGS_DIR, SystemTable, sizeof(I2O_SET_SYSTAB_HEADER)); ++sg; for (ha = Asr_softc; ha; ha = ha->ha_next) { SG(sg, 0, ((ha->ha_next) ? (I2O_SGL_FLAGS_DIR) : (I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_END_OF_BUFFER)), &(ha->ha_SystemTable), sizeof(ha->ha_SystemTable)); ++sg; } SG(sg, 0, I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_END_OF_BUFFER, NULL, 0); SG(sg, 1, I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER, NULL, 0); retVal = ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr); free (Message_Ptr, M_TEMP); free (SystemTable, M_TEMP); return (retVal); } /* ASR_setSysTab */ STATIC INLINE int ASR_acquireHrt ( INOUT Asr_softc_t * sc) { defAlignLong(I2O_EXEC_HRT_GET_MESSAGE,Message); I2O_EXEC_HRT_GET_MESSAGE * Message_Ptr; struct { I2O_HRT Header; I2O_HRT_ENTRY Entry[MAX_CHANNEL]; } Hrt; u_int8_t NumberOfEntries; PI2O_HRT_ENTRY Entry; bzero ((void *)&Hrt, sizeof (Hrt)); Message_Ptr = (I2O_EXEC_HRT_GET_MESSAGE *)ASR_fillMessage(Message, sizeof(I2O_EXEC_HRT_GET_MESSAGE) - sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT)); I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame), (I2O_VERSION_11 + (((sizeof(I2O_EXEC_HRT_GET_MESSAGE) - sizeof(I2O_SG_ELEMENT)) / sizeof(U32)) << 4))); I2O_MESSAGE_FRAME_setFunction (&(Message_Ptr->StdMessageFrame), I2O_EXEC_HRT_GET); /* * Set up the buffers as scatter gather elements. */ SG(&(Message_Ptr->SGL), 0, I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER, &Hrt, sizeof(Hrt)); if (ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr) != CAM_REQ_CMP) { return (ENODEV); } if ((NumberOfEntries = I2O_HRT_getNumberEntries(&Hrt.Header)) > (MAX_CHANNEL + 1)) { NumberOfEntries = MAX_CHANNEL + 1; } for (Entry = Hrt.Header.HRTEntry; NumberOfEntries != 0; ++Entry, --NumberOfEntries) { PI2O_LCT_ENTRY Device; for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY) (((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT)); ++Device) { if (I2O_LCT_ENTRY_getLocalTID(Device) == (I2O_HRT_ENTRY_getAdapterID(Entry) & 0xFFF)) { Device->le_bus = I2O_HRT_ENTRY_getAdapterID( Entry) >> 16; if ((Device->le_bus > sc->ha_MaxBus) && (Device->le_bus <= MAX_CHANNEL)) { sc->ha_MaxBus = Device->le_bus; } } } } return (0); } /* ASR_acquireHrt */ /* * Enable the adapter. */ STATIC INLINE int ASR_enableSys ( IN Asr_softc_t * sc) { defAlignLong(I2O_EXEC_SYS_ENABLE_MESSAGE,Message); PI2O_EXEC_SYS_ENABLE_MESSAGE Message_Ptr; Message_Ptr = (PI2O_EXEC_SYS_ENABLE_MESSAGE)ASR_fillMessage(Message, sizeof(I2O_EXEC_SYS_ENABLE_MESSAGE)); I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame), I2O_EXEC_SYS_ENABLE); return (ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr) != 0); } /* ASR_enableSys */ /* * Perform the stages necessary to initialize the adapter */ STATIC int ASR_init( IN Asr_softc_t * sc) { return ((ASR_initOutBound(sc) == 0) || (ASR_setSysTab(sc) != CAM_REQ_CMP) || (ASR_enableSys(sc) != CAM_REQ_CMP)); } /* ASR_init */ /* * Send a Synchronize Cache command to the target device. */ STATIC INLINE void ASR_sync ( IN Asr_softc_t * sc, IN int bus, IN int target, IN int lun) { tid_t TID; /* * We will not synchronize the device when there are outstanding * commands issued by the OS (this is due to a locked up device, * as the OS normally would flush all outstanding commands before * issuing a shutdown or an adapter reset). */ if ((sc != (Asr_softc_t *)NULL) && (LIST_FIRST(&sc->ha_ccb) != (struct ccb_hdr *)NULL) && ((TID = ASR_getTid (sc, bus, target, lun)) != (tid_t)-1) && (TID != (tid_t)0)) { defAlignLong(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE,Message); PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE Message_Ptr; bzero (Message_Ptr = getAlignLong(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE, Message), sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT)); I2O_MESSAGE_FRAME_setVersionOffset( (PI2O_MESSAGE_FRAME)Message_Ptr, I2O_VERSION_11 | (((sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT)) / sizeof(U32)) << 4)); I2O_MESSAGE_FRAME_setMessageSize( (PI2O_MESSAGE_FRAME)Message_Ptr, (sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT)) / sizeof(U32)); I2O_MESSAGE_FRAME_setInitiatorAddress ( (PI2O_MESSAGE_FRAME)Message_Ptr, 1); I2O_MESSAGE_FRAME_setFunction( (PI2O_MESSAGE_FRAME)Message_Ptr, I2O_PRIVATE_MESSAGE); I2O_MESSAGE_FRAME_setTargetAddress( (PI2O_MESSAGE_FRAME)Message_Ptr, TID); I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode ( (PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, I2O_SCSI_SCB_EXEC); PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setTID(Message_Ptr, TID); PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr, I2O_SCB_FLAG_ENABLE_DISCONNECT | I2O_SCB_FLAG_SIMPLE_QUEUE_TAG | I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER); I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID( (PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, DPT_ORGANIZATION_ID); PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(Message_Ptr, 6); Message_Ptr->CDB[0] = SYNCHRONIZE_CACHE; Message_Ptr->CDB[1] = (lun << 5); PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr, (I2O_SCB_FLAG_XFER_FROM_DEVICE | I2O_SCB_FLAG_ENABLE_DISCONNECT | I2O_SCB_FLAG_SIMPLE_QUEUE_TAG | I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER)); (void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr); } } STATIC INLINE void ASR_synchronize ( IN Asr_softc_t * sc) { int bus, target, lun; for (bus = 0; bus <= sc->ha_MaxBus; ++bus) { for (target = 0; target <= sc->ha_MaxId; ++target) { for (lun = 0; lun <= sc->ha_MaxLun; ++lun) { ASR_sync(sc,bus,target,lun); } } } } /* * Reset the HBA, targets and BUS. * Currently this resets *all* the SCSI busses. */ STATIC INLINE void asr_hbareset( IN Asr_softc_t * sc) { ASR_synchronize (sc); ASR_reset (sc); } /* asr_hbareset */ /* * A reduced copy of the real pci_map_mem, incorporating the MAX_MAP * limit and a reduction in error checking (in the pre 4.0 case). */ STATIC int asr_pci_map_mem ( #if __FreeBSD_version >= 400000 IN device_t tag, #else IN pcici_t tag, #endif IN Asr_softc_t * sc) { int rid; u_int32_t p, l; #if __FreeBSD_version >= 400000 /* * I2O specification says we must find first *memory* mapped BAR */ for (rid = PCIR_MAPS; rid < (PCIR_MAPS + 4 * sizeof(u_int32_t)); ++rid) { p = pci_read_config(tag, rid, sizeof(p)); if ((p & 1) == 0) { break; } } /* * Give up? */ if (rid >= (PCIR_MAPS + 4 * sizeof(u_int32_t))) { rid = PCIR_MAPS; } p = pci_read_config(tag, rid, sizeof(p)); pci_write_config(tag, rid, -1, sizeof(p)); l = 0 - (pci_read_config(tag, rid, sizeof(l)) & ~15); pci_write_config(tag, rid, p, sizeof(p)); if (l > MAX_MAP) { l = MAX_MAP; } p &= ~15; sc->ha_mem_res = bus_alloc_resource(tag, SYS_RES_MEMORY, &rid, p, p + l, l, RF_ACTIVE); if (sc->ha_mem_res == (struct resource *)NULL) { return (0); } sc->ha_Base = (void *)rman_get_start(sc->ha_mem_res); if (sc->ha_Base == (void *)NULL) { return (0); } sc->ha_Virt = (i2oRegs_t *) rman_get_virtual(sc->ha_mem_res); #else vm_size_t psize, poffs; /* * I2O specification says we must find first *memory* mapped BAR */ for (rid = PCI_MAP_REG_START; rid < (PCI_MAP_REG_START + 4 * sizeof(u_int32_t)); ++rid) { p = pci_conf_read (tag, rid); if ((p & 1) == 0) { break; } } if (rid >= (PCI_MAP_REG_START + 4 * sizeof(u_int32_t))) { rid = PCI_MAP_REG_START; } /* ** save old mapping, get size and type of memory ** ** type is in the lowest four bits. ** If device requires 2^n bytes, the next ** n-4 bits are read as 0. */ sc->ha_Base = (void *)((p = pci_conf_read (tag, rid)) & PCI_MAP_MEMORY_ADDRESS_MASK); pci_conf_write (tag, rid, 0xfffffffful); l = pci_conf_read (tag, rid); pci_conf_write (tag, rid, p); /* ** check the type */ if (!((l & PCI_MAP_MEMORY_TYPE_MASK) == PCI_MAP_MEMORY_TYPE_32BIT_1M && ((u_long)sc->ha_Base & ~0xfffff) == 0) && ((l & PCI_MAP_MEMORY_TYPE_MASK) != PCI_MAP_MEMORY_TYPE_32BIT)) { debug_asr_printf ( "asr_pci_map_mem failed: bad memory type=0x%x\n", (unsigned) l); return (0); }; /* ** get the size. */ psize = -(l & PCI_MAP_MEMORY_ADDRESS_MASK); if (psize > MAX_MAP) { psize = MAX_MAP; } if ((sc->ha_Base == (void *)NULL) || (sc->ha_Base == (void *)PCI_MAP_MEMORY_ADDRESS_MASK)) { debug_asr_printf ("asr_pci_map_mem: not configured by bios.\n"); return (0); }; /* ** Truncate sc->ha_Base to page boundary. ** (Or does pmap_mapdev the job?) */ poffs = (u_long)sc->ha_Base - trunc_page ((u_long)sc->ha_Base); sc->ha_Virt = (i2oRegs_t *)pmap_mapdev ((u_long)sc->ha_Base - poffs, psize + poffs); if (sc->ha_Virt == (i2oRegs_t *)NULL) { return (0); } sc->ha_Virt = (i2oRegs_t *)((u_long)sc->ha_Virt + poffs); #endif return (1); } /* asr_pci_map_mem */ /* * A simplified copy of the real pci_map_int with additional * registration requirements. */ STATIC int asr_pci_map_int ( #if __FreeBSD_version >= 400000 IN device_t tag, #else IN pcici_t tag, #endif IN Asr_softc_t * sc) { #if __FreeBSD_version >= 400000 int rid = 0; sc->ha_irq_res = bus_alloc_resource(tag, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_ACTIVE | RF_SHAREABLE); if (sc->ha_irq_res == (struct resource *)NULL) { return (0); } if (bus_setup_intr(tag, sc->ha_irq_res, INTR_TYPE_CAM | INTR_ENTROPY, (driver_intr_t *)asr_intr, (void *)sc, &(sc->ha_intr))) { return (0); } sc->ha_irq = pci_read_config(tag, PCIR_INTLINE, sizeof(char)); #else if (!pci_map_int(tag, (pci_inthand_t *)asr_intr, (void *)sc, &cam_imask)) { return (0); } sc->ha_irq = pci_conf_read(tag, PCIR_INTLINE); #endif return (1); } /* asr_pci_map_int */ /* * Attach the devices, and virtual devices to the driver list. */ STATIC ATTACH_RET asr_attach (ATTACH_ARGS) { Asr_softc_t * sc; struct scsi_inquiry_data * iq; ATTACH_SET(); if ((sc = malloc(sizeof(*sc), M_DEVBUF, M_NOWAIT | M_ZERO)) == (Asr_softc_t *)NULL) { ATTACH_RETURN(ENOMEM); } if (Asr_softc == (Asr_softc_t *)NULL) { /* * Fixup the OS revision as saved in the dptsig for the * engine (dptioctl.h) to pick up. */ bcopy (osrelease, &ASR_sig.dsDescription[16], 5); printf ("asr%d: major=%d\n", unit, asr_cdevsw.d_maj); } /* * Initialize the software structure */ LIST_INIT(&sc->ha_ccb); # ifdef ASR_MEASURE_PERFORMANCE { u_int32_t i; // initialize free list for timeQ sc->ha_timeQFreeHead = 0; sc->ha_timeQFreeTail = MAX_TIMEQ_SIZE - 1; for (i = 0; i < MAX_TIMEQ_SIZE; i++) { sc->ha_timeQFreeList[i] = i; } } # endif /* Link us into the HA list */ { Asr_softc_t **ha; for (ha = &Asr_softc; *ha; ha = &((*ha)->ha_next)); *(ha) = sc; } { PI2O_EXEC_STATUS_GET_REPLY status; int size; /* * This is the real McCoy! */ if (!asr_pci_map_mem(tag, sc)) { printf ("asr%d: could not map memory\n", unit); ATTACH_RETURN(ENXIO); } /* Enable if not formerly enabled */ #if __FreeBSD_version >= 400000 pci_write_config (tag, PCIR_COMMAND, pci_read_config (tag, PCIR_COMMAND, sizeof(char)) | PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN, sizeof(char)); /* Knowledge is power, responsibility is direct */ { struct pci_devinfo { STAILQ_ENTRY(pci_devinfo) pci_links; struct resource_list resources; pcicfgregs cfg; } * dinfo = device_get_ivars(tag); sc->ha_pciBusNum = dinfo->cfg.bus; sc->ha_pciDeviceNum = (dinfo->cfg.slot << 3) | dinfo->cfg.func; } #else pci_conf_write (tag, PCIR_COMMAND, pci_conf_read (tag, PCIR_COMMAND) | PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN); /* Knowledge is power, responsibility is direct */ switch (pci_mechanism) { case 1: sc->ha_pciBusNum = tag.cfg1 >> 16; sc->ha_pciDeviceNum = tag.cfg1 >> 8; case 2: sc->ha_pciBusNum = tag.cfg2.forward; sc->ha_pciDeviceNum = ((tag.cfg2.enable >> 1) & 7) | (tag.cfg2.port >> 5); } #endif /* Check if the device is there? */ if ((ASR_resetIOP(sc->ha_Virt) == 0) || ((status = (PI2O_EXEC_STATUS_GET_REPLY)malloc ( sizeof(I2O_EXEC_STATUS_GET_REPLY), M_TEMP, M_WAITOK)) == (PI2O_EXEC_STATUS_GET_REPLY)NULL) || (ASR_getStatus(sc->ha_Virt, status) == NULL)) { printf ("asr%d: could not initialize hardware\n", unit); ATTACH_RETURN(ENODEV); /* Get next, maybe better luck */ } sc->ha_SystemTable.OrganizationID = status->OrganizationID; sc->ha_SystemTable.IOP_ID = status->IOP_ID; sc->ha_SystemTable.I2oVersion = status->I2oVersion; sc->ha_SystemTable.IopState = status->IopState; sc->ha_SystemTable.MessengerType = status->MessengerType; sc->ha_SystemTable.InboundMessageFrameSize = status->InboundMFrameSize; sc->ha_SystemTable.MessengerInfo.InboundMessagePortAddressLow = (U32)(sc->ha_Base) + (U32)(&(((i2oRegs_t *)NULL)->ToFIFO)); if (!asr_pci_map_int(tag, (void *)sc)) { printf ("asr%d: could not map interrupt\n", unit); ATTACH_RETURN(ENXIO); } /* Adjust the maximim inbound count */ if (((sc->ha_QueueSize = I2O_EXEC_STATUS_GET_REPLY_getMaxInboundMFrames(status)) > MAX_INBOUND) || (sc->ha_QueueSize == 0)) { sc->ha_QueueSize = MAX_INBOUND; } /* Adjust the maximum outbound count */ if (((sc->ha_Msgs_Count = I2O_EXEC_STATUS_GET_REPLY_getMaxOutboundMFrames(status)) > MAX_OUTBOUND) || (sc->ha_Msgs_Count == 0)) { sc->ha_Msgs_Count = MAX_OUTBOUND; } if (sc->ha_Msgs_Count > sc->ha_QueueSize) { sc->ha_Msgs_Count = sc->ha_QueueSize; } /* Adjust the maximum SG size to adapter */ if ((size = (I2O_EXEC_STATUS_GET_REPLY_getInboundMFrameSize( status) << 2)) > MAX_INBOUND_SIZE) { size = MAX_INBOUND_SIZE; } free (status, M_TEMP); sc->ha_SgSize = (size - sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) + sizeof(I2O_SG_ELEMENT)) / sizeof(I2O_SGE_SIMPLE_ELEMENT); } /* * Only do a bus/HBA reset on the first time through. On this * first time through, we do not send a flush to the devices. */ if (ASR_init(sc) == 0) { struct BufferInfo { I2O_PARAM_RESULTS_LIST_HEADER Header; I2O_PARAM_READ_OPERATION_RESULT Read; I2O_DPT_EXEC_IOP_BUFFERS_SCALAR Info; }; defAlignLong (struct BufferInfo, Buffer); PI2O_DPT_EXEC_IOP_BUFFERS_SCALAR Info; # define FW_DEBUG_BLED_OFFSET 8 if ((Info = (PI2O_DPT_EXEC_IOP_BUFFERS_SCALAR) ASR_getParams(sc, 0, I2O_DPT_EXEC_IOP_BUFFERS_GROUP_NO, Buffer, sizeof(struct BufferInfo))) != (PI2O_DPT_EXEC_IOP_BUFFERS_SCALAR)NULL) { sc->ha_blinkLED = sc->ha_Virt->Address + I2O_DPT_EXEC_IOP_BUFFERS_SCALAR_getSerialOutputOffset(Info) + FW_DEBUG_BLED_OFFSET; } if (ASR_acquireLct(sc) == 0) { (void)ASR_acquireHrt(sc); } } else { printf ("asr%d: failed to initialize\n", unit); ATTACH_RETURN(ENXIO); } /* * Add in additional probe responses for more channels. We * are reusing the variable `target' for a channel loop counter. * Done here because of we need both the acquireLct and * acquireHrt data. */ { PI2O_LCT_ENTRY Device; for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY) (((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT)); ++Device) { if (Device->le_type == I2O_UNKNOWN) { continue; } if (I2O_LCT_ENTRY_getUserTID(Device) == 0xFFF) { if (Device->le_target > sc->ha_MaxId) { sc->ha_MaxId = Device->le_target; } if (Device->le_lun > sc->ha_MaxLun) { sc->ha_MaxLun = Device->le_lun; } } if (((Device->le_type & I2O_PORT) != 0) && (Device->le_bus <= MAX_CHANNEL)) { /* Do not increase MaxId for efficiency */ sc->ha_adapter_target[Device->le_bus] = Device->le_target; } } } /* * Print the HBA model number as inquired from the card. */ printf ("asr%d:", unit); if ((iq = (struct scsi_inquiry_data *)malloc ( sizeof(struct scsi_inquiry_data), M_TEMP, M_WAITOK | M_ZERO)) != (struct scsi_inquiry_data *)NULL) { defAlignLong(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE,Message); PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE Message_Ptr; int posted = 0; bzero (Message_Ptr = getAlignLong(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE, Message), sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT)); I2O_MESSAGE_FRAME_setVersionOffset( (PI2O_MESSAGE_FRAME)Message_Ptr, I2O_VERSION_11 | (((sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT)) / sizeof(U32)) << 4)); I2O_MESSAGE_FRAME_setMessageSize( (PI2O_MESSAGE_FRAME)Message_Ptr, (sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT)) / sizeof(U32)); I2O_MESSAGE_FRAME_setInitiatorAddress ( (PI2O_MESSAGE_FRAME)Message_Ptr, 1); I2O_MESSAGE_FRAME_setFunction( (PI2O_MESSAGE_FRAME)Message_Ptr, I2O_PRIVATE_MESSAGE); I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode ( (PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, I2O_SCSI_SCB_EXEC); PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr, I2O_SCB_FLAG_ENABLE_DISCONNECT | I2O_SCB_FLAG_SIMPLE_QUEUE_TAG | I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER); PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setInterpret(Message_Ptr, 1); I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID( (PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, DPT_ORGANIZATION_ID); PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(Message_Ptr, 6); Message_Ptr->CDB[0] = INQUIRY; Message_Ptr->CDB[4] = (unsigned char)sizeof(struct scsi_inquiry_data); if (Message_Ptr->CDB[4] == 0) { Message_Ptr->CDB[4] = 255; } PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr, (I2O_SCB_FLAG_XFER_FROM_DEVICE | I2O_SCB_FLAG_ENABLE_DISCONNECT | I2O_SCB_FLAG_SIMPLE_QUEUE_TAG | I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER)); PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setByteCount( (PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, sizeof(struct scsi_inquiry_data)); SG(&(Message_Ptr->SGL), 0, I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER, iq, sizeof(struct scsi_inquiry_data)); (void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr); if (iq->vendor[0] && (iq->vendor[0] != ' ')) { printf (" "); ASR_prstring (iq->vendor, 8); ++posted; } if (iq->product[0] && (iq->product[0] != ' ')) { printf (" "); ASR_prstring (iq->product, 16); ++posted; } if (iq->revision[0] && (iq->revision[0] != ' ')) { printf (" FW Rev. "); ASR_prstring (iq->revision, 4); ++posted; } free ((caddr_t)iq, M_TEMP); if (posted) { printf (","); } } printf (" %d channel, %d CCBs, Protocol I2O\n", sc->ha_MaxBus + 1, (sc->ha_QueueSize > MAX_INBOUND) ? MAX_INBOUND : sc->ha_QueueSize); /* * fill in the prototype cam_path. */ { int bus; union asr_ccb * ccb; if ((ccb = asr_alloc_ccb (sc)) == (union asr_ccb *)NULL) { printf ("asr%d: CAM could not be notified of asynchronous callback parameters\n", unit); ATTACH_RETURN(ENOMEM); } for (bus = 0; bus <= sc->ha_MaxBus; ++bus) { struct cam_devq * devq; int QueueSize = sc->ha_QueueSize; if (QueueSize > MAX_INBOUND) { QueueSize = MAX_INBOUND; } /* * Create the device queue for our SIM(s). */ if ((devq = cam_simq_alloc(QueueSize)) == NULL) { continue; } /* * Construct our first channel SIM entry */ sc->ha_sim[bus] = cam_sim_alloc( asr_action, asr_poll, "asr", sc, unit, 1, QueueSize, devq); if (sc->ha_sim[bus] == NULL) { continue; } if (xpt_bus_register(sc->ha_sim[bus], bus) != CAM_SUCCESS) { cam_sim_free(sc->ha_sim[bus], /*free_devq*/TRUE); sc->ha_sim[bus] = NULL; continue; } if (xpt_create_path(&(sc->ha_path[bus]), /*periph*/NULL, cam_sim_path(sc->ha_sim[bus]), CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { xpt_bus_deregister( cam_sim_path(sc->ha_sim[bus])); cam_sim_free(sc->ha_sim[bus], /*free_devq*/TRUE); sc->ha_sim[bus] = NULL; continue; } xpt_setup_ccb(&(ccb->ccb_h), sc->ha_path[bus], /*priority*/5); ccb->ccb_h.func_code = XPT_SASYNC_CB; ccb->csa.event_enable = AC_LOST_DEVICE; ccb->csa.callback = asr_async; ccb->csa.callback_arg = sc->ha_sim[bus]; xpt_action((union ccb *)ccb); } asr_free_ccb (ccb); } /* * Generate the device node information */ (void)make_dev(&asr_cdevsw, unit, 0, 0, S_IRWXU, "rasr%d", unit); destroy_dev(makedev(asr_cdevsw.d_maj,unit+1)); ATTACH_RETURN(0); } /* asr_attach */ #if (!defined(UNREFERENCED_PARAMETER)) # define UNREFERENCED_PARAMETER(x) (void)(x) #endif STATIC void asr_async( void * callback_arg, u_int32_t code, struct cam_path * path, void * arg) { UNREFERENCED_PARAMETER(callback_arg); UNREFERENCED_PARAMETER(code); UNREFERENCED_PARAMETER(path); UNREFERENCED_PARAMETER(arg); } /* asr_async */ STATIC void asr_poll( IN struct cam_sim *sim) { asr_intr(cam_sim_softc(sim)); } /* asr_poll */ STATIC void asr_action( IN struct cam_sim * sim, IN union ccb * ccb) { struct Asr_softc * sc; debug_asr_printf ("asr_action(%lx,%lx{%x})\n", (u_long)sim, (u_long)ccb, ccb->ccb_h.func_code); CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("asr_action\n")); ccb->ccb_h.spriv_ptr0 = sc = (struct Asr_softc *)cam_sim_softc(sim); switch (ccb->ccb_h.func_code) { /* Common cases first */ case XPT_SCSI_IO: /* Execute the requested I/O operation */ { struct Message { char M[MAX_INBOUND_SIZE]; }; defAlignLong(struct Message,Message); PI2O_MESSAGE_FRAME Message_Ptr; if (ccb->ccb_h.status != CAM_REQ_INPROG) { printf( "asr%d WARNING: scsi_cmd(%x) already done on b%dt%du%d\n", cam_sim_unit(xpt_path_sim(ccb->ccb_h.path)), ccb->csio.cdb_io.cdb_bytes[0], cam_sim_bus(sim), ccb->ccb_h.target_id, ccb->ccb_h.target_lun); } debug_asr_cmd_printf ("(%d,%d,%d,%d)", cam_sim_unit(sim), cam_sim_bus(sim), ccb->ccb_h.target_id, ccb->ccb_h.target_lun); debug_asr_cmd_dump_ccb(ccb); if ((Message_Ptr = ASR_init_message ((union asr_ccb *)ccb, (PI2O_MESSAGE_FRAME)Message)) != (PI2O_MESSAGE_FRAME)NULL) { debug_asr_cmd2_printf ("TID=%x:\n", PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getTID( (PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr)); debug_asr_cmd2_dump_message(Message_Ptr); debug_asr_cmd1_printf (" q"); if (ASR_queue (sc, Message_Ptr) == EMPTY_QUEUE) { #ifdef ASR_MEASURE_PERFORMANCE ++sc->ha_performance.command_too_busy; #endif ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_REQUEUE_REQ; debug_asr_cmd_printf (" E\n"); xpt_done(ccb); } debug_asr_cmd_printf (" Q\n"); break; } /* * We will get here if there is no valid TID for the device * referenced in the scsi command packet. */ ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_SEL_TIMEOUT; debug_asr_cmd_printf (" B\n"); xpt_done(ccb); break; } case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ /* Rese HBA device ... */ asr_hbareset (sc); ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); break; # if (defined(REPORT_LUNS)) case REPORT_LUNS: # endif case XPT_ABORT: /* Abort the specified CCB */ /* XXX Implement */ ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(ccb); break; case XPT_SET_TRAN_SETTINGS: /* XXX Implement */ ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; xpt_done(ccb); break; case XPT_GET_TRAN_SETTINGS: /* Get default/user set transfer settings for the target */ { struct ccb_trans_settings *cts; u_int target_mask; cts = &ccb->cts; target_mask = 0x01 << ccb->ccb_h.target_id; if ((cts->flags & CCB_TRANS_USER_SETTINGS) != 0) { cts->flags = CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB; cts->bus_width = MSG_EXT_WDTR_BUS_16_BIT; cts->sync_period = 6; /* 40MHz */ cts->sync_offset = 15; cts->valid = CCB_TRANS_SYNC_RATE_VALID | CCB_TRANS_SYNC_OFFSET_VALID | CCB_TRANS_BUS_WIDTH_VALID | CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID; ccb->ccb_h.status = CAM_REQ_CMP; } else { ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; } xpt_done(ccb); break; } case XPT_CALC_GEOMETRY: { struct ccb_calc_geometry *ccg; u_int32_t size_mb; u_int32_t secs_per_cylinder; ccg = &ccb->ccg; size_mb = ccg->volume_size / ((1024L * 1024L) / ccg->block_size); if (size_mb > 4096) { ccg->heads = 255; ccg->secs_per_track = 63; } else if (size_mb > 2048) { ccg->heads = 128; ccg->secs_per_track = 63; } else if (size_mb > 1024) { ccg->heads = 65; ccg->secs_per_track = 63; } else { ccg->heads = 64; ccg->secs_per_track = 32; } secs_per_cylinder = ccg->heads * ccg->secs_per_track; ccg->cylinders = ccg->volume_size / secs_per_cylinder; ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); break; } case XPT_RESET_BUS: /* Reset the specified SCSI bus */ ASR_resetBus (sc, cam_sim_bus(sim)); ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); break; case XPT_TERM_IO: /* Terminate the I/O process */ /* XXX Implement */ ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(ccb); break; case XPT_PATH_INQ: /* Path routing inquiry */ { struct ccb_pathinq *cpi = &ccb->cpi; cpi->version_num = 1; /* XXX??? */ cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16; cpi->target_sprt = 0; /* Not necessary to reset bus, done by HDM initialization */ cpi->hba_misc = PIM_NOBUSRESET; cpi->hba_eng_cnt = 0; cpi->max_target = sc->ha_MaxId; cpi->max_lun = sc->ha_MaxLun; cpi->initiator_id = sc->ha_adapter_target[cam_sim_bus(sim)]; cpi->bus_id = cam_sim_bus(sim); cpi->base_transfer_speed = 3300; strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); strncpy(cpi->hba_vid, "Adaptec", HBA_IDLEN); strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); cpi->unit_number = cam_sim_unit(sim); cpi->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); break; } default: ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(ccb); break; } } /* asr_action */ #ifdef ASR_MEASURE_PERFORMANCE #define WRITE_OP 1 #define READ_OP 2 #define min_submitR sc->ha_performance.read_by_size_min_time[index] #define max_submitR sc->ha_performance.read_by_size_max_time[index] #define min_submitW sc->ha_performance.write_by_size_min_time[index] #define max_submitW sc->ha_performance.write_by_size_max_time[index] STATIC INLINE void asr_IObySize( IN Asr_softc_t * sc, IN u_int32_t submitted_time, IN int op, IN int index) { struct timeval submitted_timeval; submitted_timeval.tv_sec = 0; submitted_timeval.tv_usec = submitted_time; if ( op == READ_OP ) { ++sc->ha_performance.read_by_size_count[index]; if ( submitted_time != 0xffffffff ) { timevaladd( &sc->ha_performance.read_by_size_total_time[index], &submitted_timeval); if ( (min_submitR == 0) || (submitted_time < min_submitR) ) { min_submitR = submitted_time; } if ( submitted_time > max_submitR ) { max_submitR = submitted_time; } } } else { ++sc->ha_performance.write_by_size_count[index]; if ( submitted_time != 0xffffffff ) { timevaladd( &sc->ha_performance.write_by_size_total_time[index], &submitted_timeval); if ( (submitted_time < min_submitW) || (min_submitW == 0) ) { min_submitW = submitted_time; } if ( submitted_time > max_submitW ) { max_submitW = submitted_time; } } } } /* asr_IObySize */ #endif /* * Handle processing of current CCB as pointed to by the Status. */ STATIC int asr_intr ( IN Asr_softc_t * sc) { OUT int processed; #ifdef ASR_MEASURE_PERFORMANCE struct timeval junk; microtime(&junk); sc->ha_performance.intr_started = junk; #endif for (processed = 0; sc->ha_Virt->Status & Mask_InterruptsDisabled; processed = 1) { union asr_ccb * ccb; U32 ReplyOffset; PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME Reply; if (((ReplyOffset = sc->ha_Virt->FromFIFO) == EMPTY_QUEUE) && ((ReplyOffset = sc->ha_Virt->FromFIFO) == EMPTY_QUEUE)) { break; } Reply = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)(ReplyOffset - sc->ha_Msgs_Phys + (char *)(sc->ha_Msgs)); /* * We do not need any (optional byteswapping) method access to * the Initiator context field. */ ccb = (union asr_ccb *)(long) I2O_MESSAGE_FRAME_getInitiatorContext64( &(Reply->StdReplyFrame.StdMessageFrame)); if (I2O_MESSAGE_FRAME_getMsgFlags( &(Reply->StdReplyFrame.StdMessageFrame)) & I2O_MESSAGE_FLAGS_FAIL) { defAlignLong(I2O_UTIL_NOP_MESSAGE,Message); PI2O_UTIL_NOP_MESSAGE Message_Ptr; U32 MessageOffset; MessageOffset = (u_long) I2O_FAILURE_REPLY_MESSAGE_FRAME_getPreservedMFA( (PI2O_FAILURE_REPLY_MESSAGE_FRAME)Reply); /* * Get the Original Message Frame's address, and get * it's Transaction Context into our space. (Currently * unused at original authorship, but better to be * safe than sorry). Straight copy means that we * need not concern ourselves with the (optional * byteswapping) method access. */ Reply->StdReplyFrame.TransactionContext = ((PI2O_SINGLE_REPLY_MESSAGE_FRAME) (sc->ha_Virt->Address + MessageOffset)) ->TransactionContext; /* * For 64 bit machines, we need to reconstruct the * 64 bit context. */ ccb = (union asr_ccb *)(long) I2O_MESSAGE_FRAME_getInitiatorContext64( &(Reply->StdReplyFrame.StdMessageFrame)); /* * Unique error code for command failure. */ I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode( &(Reply->StdReplyFrame), (u_int16_t)-2); /* * Modify the message frame to contain a NOP and * re-issue it to the controller. */ Message_Ptr = (PI2O_UTIL_NOP_MESSAGE)ASR_fillMessage( Message, sizeof(I2O_UTIL_NOP_MESSAGE)); # if (I2O_UTIL_NOP != 0) I2O_MESSAGE_FRAME_setFunction ( &(Message_Ptr->StdMessageFrame), I2O_UTIL_NOP); # endif /* * Copy the packet out to the Original Message */ bcopy ((caddr_t)Message_Ptr, sc->ha_Virt->Address + MessageOffset, sizeof(I2O_UTIL_NOP_MESSAGE)); /* * Issue the NOP */ sc->ha_Virt->ToFIFO = MessageOffset; } /* * Asynchronous command with no return requirements, * and a generic handler for immunity against odd error * returns from the adapter. */ if (ccb == (union asr_ccb *)NULL) { /* * Return Reply so that it can be used for the * next command */ sc->ha_Virt->FromFIFO = ReplyOffset; continue; } /* Welease Wadjah! (and stop timeouts) */ ASR_ccbRemove (sc, ccb); switch ( I2O_SINGLE_REPLY_MESSAGE_FRAME_getDetailedStatusCode( &(Reply->StdReplyFrame))) { case I2O_SCSI_DSC_SUCCESS: ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_REQ_CMP; break; case I2O_SCSI_DSC_CHECK_CONDITION: ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_REQ_CMP|CAM_AUTOSNS_VALID; break; case I2O_SCSI_DSC_BUSY: /* FALLTHRU */ case I2O_SCSI_HBA_DSC_ADAPTER_BUSY: /* FALLTHRU */ case I2O_SCSI_HBA_DSC_SCSI_BUS_RESET: /* FALLTHRU */ case I2O_SCSI_HBA_DSC_BUS_BUSY: ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_SCSI_BUSY; break; case I2O_SCSI_HBA_DSC_SELECTION_TIMEOUT: ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_SEL_TIMEOUT; break; case I2O_SCSI_HBA_DSC_COMMAND_TIMEOUT: /* FALLTHRU */ case I2O_SCSI_HBA_DSC_DEVICE_NOT_PRESENT: /* FALLTHRU */ case I2O_SCSI_HBA_DSC_LUN_INVALID: /* FALLTHRU */ case I2O_SCSI_HBA_DSC_SCSI_TID_INVALID: ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_CMD_TIMEOUT; break; case I2O_SCSI_HBA_DSC_DATA_OVERRUN: /* FALLTHRU */ case I2O_SCSI_HBA_DSC_REQUEST_LENGTH_ERROR: ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_DATA_RUN_ERR; break; default: ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_REQUEUE_REQ; break; } if ((ccb->csio.resid = ccb->csio.dxfer_len) != 0) { ccb->csio.resid -= I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_getTransferCount( Reply); } #ifdef ASR_MEASURE_PERFORMANCE { struct timeval endTime; u_int32_t submitted_time; u_int32_t size; int op_type; int startTimeIndex; --sc->ha_submitted_ccbs_count; startTimeIndex = (int)Reply->StdReplyFrame.TransactionContext; if (-1 != startTimeIndex) { /* Compute the time spent in device/adapter */ microtime(&endTime); submitted_time = asr_time_delta(sc->ha_timeQ[ startTimeIndex], endTime); /* put the startTimeIndex back on free list */ ENQ_TIMEQ_FREE_LIST(startTimeIndex, sc->ha_timeQFreeList, sc->ha_timeQFreeHead, sc->ha_timeQFreeTail); } else { submitted_time = 0xffffffff; } #define maxctime sc->ha_performance.max_command_time[ccb->csio.cdb_io.cdb_bytes[0]] #define minctime sc->ha_performance.min_command_time[ccb->csio.cdb_io.cdb_bytes[0]] if (submitted_time != 0xffffffff) { if ( maxctime < submitted_time ) { maxctime = submitted_time; } if ( (minctime == 0) || (minctime > submitted_time) ) { minctime = submitted_time; } if ( sc->ha_performance.max_submit_time < submitted_time ) { sc->ha_performance.max_submit_time = submitted_time; } if ( sc->ha_performance.min_submit_time == 0 || sc->ha_performance.min_submit_time > submitted_time) { sc->ha_performance.min_submit_time = submitted_time; } switch ( ccb->csio.cdb_io.cdb_bytes[0] ) { case 0xa8: /* 12-byte READ */ /* FALLTHRU */ case 0x08: /* 6-byte READ */ /* FALLTHRU */ case 0x28: /* 10-byte READ */ op_type = READ_OP; break; case 0x0a: /* 6-byte WRITE */ /* FALLTHRU */ case 0xaa: /* 12-byte WRITE */ /* FALLTHRU */ case 0x2a: /* 10-byte WRITE */ op_type = WRITE_OP; break; default: op_type = 0; break; } if ( op_type != 0 ) { struct scsi_rw_big * cmd; cmd = (struct scsi_rw_big *) &(ccb->csio.cdb_io); size = (((u_int32_t) cmd->length2 << 8) | ((u_int32_t) cmd->length1)) << 9; switch ( size ) { case 512: asr_IObySize(sc, submitted_time, op_type, SIZE_512); break; case 1024: asr_IObySize(sc, submitted_time, op_type, SIZE_1K); break; case 2048: asr_IObySize(sc, submitted_time, op_type, SIZE_2K); break; case 4096: asr_IObySize(sc, submitted_time, op_type, SIZE_4K); break; case 8192: asr_IObySize(sc, submitted_time, op_type, SIZE_8K); break; case 16384: asr_IObySize(sc, submitted_time, op_type, SIZE_16K); break; case 32768: asr_IObySize(sc, submitted_time, op_type, SIZE_32K); break; case 65536: asr_IObySize(sc, submitted_time, op_type, SIZE_64K); break; default: if ( size > (1 << 16) ) { asr_IObySize(sc, submitted_time, op_type, SIZE_BIGGER); } else { asr_IObySize(sc, submitted_time, op_type, SIZE_OTHER); } break; } } } } #endif /* Sense data in reply packet */ if (ccb->ccb_h.status & CAM_AUTOSNS_VALID) { u_int16_t size = I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_getAutoSenseTransferCount(Reply); if (size) { if (size > sizeof(ccb->csio.sense_data)) { size = sizeof(ccb->csio.sense_data); } if (size > I2O_SCSI_SENSE_DATA_SZ) { size = I2O_SCSI_SENSE_DATA_SZ; } if ((ccb->csio.sense_len) && (size > ccb->csio.sense_len)) { size = ccb->csio.sense_len; } bcopy ((caddr_t)Reply->SenseData, (caddr_t)&(ccb->csio.sense_data), size); } } /* * Return Reply so that it can be used for the next command * since we have no more need for it now */ sc->ha_Virt->FromFIFO = ReplyOffset; if (ccb->ccb_h.path) { xpt_done ((union ccb *)ccb); } else { wakeup ((caddr_t)ccb); } } #ifdef ASR_MEASURE_PERFORMANCE { u_int32_t result; microtime(&junk); result = asr_time_delta(sc->ha_performance.intr_started, junk); if (result != 0xffffffff) { if ( sc->ha_performance.max_intr_time < result ) { sc->ha_performance.max_intr_time = result; } if ( (sc->ha_performance.min_intr_time == 0) || (sc->ha_performance.min_intr_time > result) ) { sc->ha_performance.min_intr_time = result; } } } #endif return (processed); } /* asr_intr */ #undef QueueSize /* Grrrr */ #undef SG_Size /* Grrrr */ /* * Meant to be included at the bottom of asr.c !!! */ /* * Included here as hard coded. Done because other necessary include * files utilize C++ comment structures which make them a nuisance to * included here just to pick up these three typedefs. */ typedef U32 DPT_TAG_T; typedef U32 DPT_MSG_T; typedef U32 DPT_RTN_T; #undef SCSI_RESET /* Conflicts with "scsi/scsiconf.h" defintion */ #include "dev/asr/osd_unix.h" #define asr_unit(dev) minor(dev) STATIC INLINE Asr_softc_t * ASR_get_sc ( IN dev_t dev) { int unit = asr_unit(dev); OUT Asr_softc_t * sc = Asr_softc; while (sc && sc->ha_sim[0] && (cam_sim_unit(sc->ha_sim[0]) != unit)) { sc = sc->ha_next; } return (sc); } /* ASR_get_sc */ STATIC u_int8_t ASR_ctlr_held; STATIC int asr_open( IN dev_t dev, int32_t flags, int32_t ifmt, IN struct proc * proc) { int s; OUT int error; UNREFERENCED_PARAMETER(flags); UNREFERENCED_PARAMETER(ifmt); if (ASR_get_sc (dev) == (Asr_softc_t *)NULL) { return (ENODEV); } s = splcam (); if (ASR_ctlr_held) { error = EBUSY; } else if ((error = suser(proc)) == 0) { ++ASR_ctlr_held; } splx(s); return (error); } /* asr_open */ STATIC int asr_close( dev_t dev, int flags, int ifmt, struct proc * proc) { UNREFERENCED_PARAMETER(dev); UNREFERENCED_PARAMETER(flags); UNREFERENCED_PARAMETER(ifmt); UNREFERENCED_PARAMETER(proc); ASR_ctlr_held = 0; return (0); } /* asr_close */ /*-------------------------------------------------------------------------*/ /* Function ASR_queue_i */ /*-------------------------------------------------------------------------*/ /* The Parameters Passed To This Function Are : */ /* Asr_softc_t * : HBA miniport driver's adapter data storage. */ /* PI2O_MESSAGE_FRAME : Msg Structure Pointer For This Command */ /* I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME following the Msg Structure */ /* */ /* This Function Will Take The User Request Packet And Convert It To An */ /* I2O MSG And Send It Off To The Adapter. */ /* */ /* Return : 0 For OK, Error Code Otherwise */ /*-------------------------------------------------------------------------*/ STATIC INLINE int ASR_queue_i( IN Asr_softc_t * sc, INOUT PI2O_MESSAGE_FRAME Packet) { union asr_ccb * ccb; PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME Reply; PI2O_MESSAGE_FRAME Message_Ptr; PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME Reply_Ptr; int MessageSizeInBytes; int ReplySizeInBytes; int error; int s; /* Scatter Gather buffer list */ struct ioctlSgList_S { SLIST_ENTRY(ioctlSgList_S) link; caddr_t UserSpace; I2O_FLAGS_COUNT FlagsCount; char KernelSpace[sizeof(long)]; } * elm; /* Generates a `first' entry */ SLIST_HEAD(ioctlSgListHead_S, ioctlSgList_S) sgList; if (ASR_getBlinkLedCode(sc)) { debug_usr_cmd_printf ("Adapter currently in BlinkLed %x\n", ASR_getBlinkLedCode(sc)); return (EIO); } /* Copy in the message into a local allocation */ if ((Message_Ptr = (PI2O_MESSAGE_FRAME)malloc ( sizeof(I2O_MESSAGE_FRAME), M_TEMP, M_WAITOK)) == (PI2O_MESSAGE_FRAME)NULL) { debug_usr_cmd_printf ( "Failed to acquire I2O_MESSAGE_FRAME memory\n"); return (ENOMEM); } if ((error = copyin ((caddr_t)Packet, (caddr_t)Message_Ptr, sizeof(I2O_MESSAGE_FRAME))) != 0) { free (Message_Ptr, M_TEMP); debug_usr_cmd_printf ("Can't copy in packet errno=%d\n", error); return (error); } /* Acquire information to determine type of packet */ MessageSizeInBytes = (I2O_MESSAGE_FRAME_getMessageSize(Message_Ptr)<<2); /* The offset of the reply information within the user packet */ Reply = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)((char *)Packet + MessageSizeInBytes); /* Check if the message is a synchronous initialization command */ s = I2O_MESSAGE_FRAME_getFunction(Message_Ptr); free (Message_Ptr, M_TEMP); switch (s) { case I2O_EXEC_IOP_RESET: { U32 status; status = ASR_resetIOP(sc->ha_Virt); ReplySizeInBytes = sizeof(status); debug_usr_cmd_printf ("resetIOP done\n"); return (copyout ((caddr_t)&status, (caddr_t)Reply, ReplySizeInBytes)); } case I2O_EXEC_STATUS_GET: { I2O_EXEC_STATUS_GET_REPLY status; if (ASR_getStatus (sc->ha_Virt, &status) == (PI2O_EXEC_STATUS_GET_REPLY)NULL) { debug_usr_cmd_printf ("getStatus failed\n"); return (ENXIO); } ReplySizeInBytes = sizeof(status); debug_usr_cmd_printf ("getStatus done\n"); return (copyout ((caddr_t)&status, (caddr_t)Reply, ReplySizeInBytes)); } case I2O_EXEC_OUTBOUND_INIT: { U32 status; status = ASR_initOutBound(sc); ReplySizeInBytes = sizeof(status); debug_usr_cmd_printf ("intOutBound done\n"); return (copyout ((caddr_t)&status, (caddr_t)Reply, ReplySizeInBytes)); } } /* Determine if the message size is valid */ if ((MessageSizeInBytes < sizeof(I2O_MESSAGE_FRAME)) || (MAX_INBOUND_SIZE < MessageSizeInBytes)) { debug_usr_cmd_printf ("Packet size %d incorrect\n", MessageSizeInBytes); return (EINVAL); } if ((Message_Ptr = (PI2O_MESSAGE_FRAME)malloc (MessageSizeInBytes, M_TEMP, M_WAITOK)) == (PI2O_MESSAGE_FRAME)NULL) { debug_usr_cmd_printf ("Failed to acquire frame[%d] memory\n", MessageSizeInBytes); return (ENOMEM); } if ((error = copyin ((caddr_t)Packet, (caddr_t)Message_Ptr, MessageSizeInBytes)) != 0) { free (Message_Ptr, M_TEMP); debug_usr_cmd_printf ("Can't copy in packet[%d] errno=%d\n", MessageSizeInBytes, error); return (error); } /* Check the size of the reply frame, and start constructing */ if ((Reply_Ptr = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)malloc ( sizeof(I2O_MESSAGE_FRAME), M_TEMP, M_WAITOK)) == (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) { free (Message_Ptr, M_TEMP); debug_usr_cmd_printf ( "Failed to acquire I2O_MESSAGE_FRAME memory\n"); return (ENOMEM); } if ((error = copyin ((caddr_t)Reply, (caddr_t)Reply_Ptr, sizeof(I2O_MESSAGE_FRAME))) != 0) { free (Reply_Ptr, M_TEMP); free (Message_Ptr, M_TEMP); debug_usr_cmd_printf ( "Failed to copy in reply frame, errno=%d\n", error); return (error); } ReplySizeInBytes = (I2O_MESSAGE_FRAME_getMessageSize( &(Reply_Ptr->StdReplyFrame.StdMessageFrame)) << 2); free (Reply_Ptr, M_TEMP); if (ReplySizeInBytes < sizeof(I2O_SINGLE_REPLY_MESSAGE_FRAME)) { free (Message_Ptr, M_TEMP); debug_usr_cmd_printf ( "Failed to copy in reply frame[%d], errno=%d\n", ReplySizeInBytes, error); return (EINVAL); } if ((Reply_Ptr = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)malloc ( ((ReplySizeInBytes > sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)) ? ReplySizeInBytes : sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)), M_TEMP, M_WAITOK)) == (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) { free (Message_Ptr, M_TEMP); debug_usr_cmd_printf ("Failed to acquire frame[%d] memory\n", ReplySizeInBytes); return (ENOMEM); } (void)ASR_fillMessage ((char *)Reply_Ptr, ReplySizeInBytes); Reply_Ptr->StdReplyFrame.StdMessageFrame.InitiatorContext = Message_Ptr->InitiatorContext; Reply_Ptr->StdReplyFrame.TransactionContext = ((PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr)->TransactionContext; I2O_MESSAGE_FRAME_setMsgFlags( &(Reply_Ptr->StdReplyFrame.StdMessageFrame), I2O_MESSAGE_FRAME_getMsgFlags( &(Reply_Ptr->StdReplyFrame.StdMessageFrame)) | I2O_MESSAGE_FLAGS_REPLY); /* Check if the message is a special case command */ switch (I2O_MESSAGE_FRAME_getFunction(Message_Ptr)) { case I2O_EXEC_SYS_TAB_SET: /* Special Case of empty Scatter Gather */ if (MessageSizeInBytes == ((I2O_MESSAGE_FRAME_getVersionOffset( Message_Ptr) & 0xF0) >> 2)) { free (Message_Ptr, M_TEMP); I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode( &(Reply_Ptr->StdReplyFrame), (ASR_setSysTab(sc) != CAM_REQ_CMP)); I2O_MESSAGE_FRAME_setMessageSize( &(Reply_Ptr->StdReplyFrame.StdMessageFrame), sizeof(I2O_SINGLE_REPLY_MESSAGE_FRAME)); error = copyout ((caddr_t)Reply_Ptr, (caddr_t)Reply, ReplySizeInBytes); free (Reply_Ptr, M_TEMP); return (error); } } /* Deal in the general case */ /* First allocate and optionally copy in each scatter gather element */ SLIST_INIT(&sgList); if ((I2O_MESSAGE_FRAME_getVersionOffset(Message_Ptr) & 0xF0) != 0) { PI2O_SGE_SIMPLE_ELEMENT sg; /* * since this code is reused in several systems, code * efficiency is greater by using a shift operation rather * than a divide by sizeof(u_int32_t). */ sg = (PI2O_SGE_SIMPLE_ELEMENT)((char *)Message_Ptr + ((I2O_MESSAGE_FRAME_getVersionOffset(Message_Ptr) & 0xF0) >> 2)); while (sg < (PI2O_SGE_SIMPLE_ELEMENT)(((caddr_t)Message_Ptr) + MessageSizeInBytes)) { caddr_t v; int len; if ((I2O_FLAGS_COUNT_getFlags(&(sg->FlagsCount)) & I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT) == 0) { error = EINVAL; break; } len = I2O_FLAGS_COUNT_getCount(&(sg->FlagsCount)); debug_usr_cmd_printf ("SG[%d] = %x[%d]\n", sg - (PI2O_SGE_SIMPLE_ELEMENT)((char *)Message_Ptr + ((I2O_MESSAGE_FRAME_getVersionOffset( Message_Ptr) & 0xF0) >> 2)), I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(sg), len); if ((elm = (struct ioctlSgList_S *)malloc ( sizeof(*elm) - sizeof(elm->KernelSpace) + len, M_TEMP, M_WAITOK)) == (struct ioctlSgList_S *)NULL) { debug_usr_cmd_printf ( "Failed to allocate SG[%d]\n", len); error = ENOMEM; break; } SLIST_INSERT_HEAD(&sgList, elm, link); elm->FlagsCount = sg->FlagsCount; elm->UserSpace = (caddr_t) (I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(sg)); v = elm->KernelSpace; /* Copy in outgoing data (DIR bit could be invalid) */ if ((error = copyin (elm->UserSpace, (caddr_t)v, len)) != 0) { break; } /* * If the buffer is not contiguous, lets * break up the scatter/gather entries. */ while ((len > 0) && (sg < (PI2O_SGE_SIMPLE_ELEMENT) (((caddr_t)Message_Ptr) + MAX_INBOUND_SIZE))) { int next, base, span; span = 0; next = base = KVTOPHYS(v); I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(sg, base); /* How far can we go physically contiguously */ while ((len > 0) && (base == next)) { int size; next = trunc_page(base) + PAGE_SIZE; size = next - base; if (size > len) { size = len; } span += size; v += size; len -= size; base = KVTOPHYS(v); } /* Construct the Flags */ I2O_FLAGS_COUNT_setCount(&(sg->FlagsCount), span); { int flags = I2O_FLAGS_COUNT_getFlags( &(elm->FlagsCount)); /* Any remaining length? */ if (len > 0) { flags &= ~(I2O_SGL_FLAGS_END_OF_BUFFER | I2O_SGL_FLAGS_LAST_ELEMENT); } I2O_FLAGS_COUNT_setFlags( &(sg->FlagsCount), flags); } debug_usr_cmd_printf ("sg[%d] = %x[%d]\n", sg - (PI2O_SGE_SIMPLE_ELEMENT) ((char *)Message_Ptr + ((I2O_MESSAGE_FRAME_getVersionOffset( Message_Ptr) & 0xF0) >> 2)), I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(sg), span); if (len <= 0) { break; } /* * Incrementing requires resizing of the * packet, and moving up the existing SG * elements. */ ++sg; MessageSizeInBytes += sizeof(*sg); I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr, I2O_MESSAGE_FRAME_getMessageSize(Message_Ptr) + (sizeof(*sg) / sizeof(U32))); { PI2O_MESSAGE_FRAME NewMessage_Ptr; if ((NewMessage_Ptr = (PI2O_MESSAGE_FRAME) malloc (MessageSizeInBytes, M_TEMP, M_WAITOK)) == (PI2O_MESSAGE_FRAME)NULL) { debug_usr_cmd_printf ( "Failed to acquire frame[%d] memory\n", MessageSizeInBytes); error = ENOMEM; break; } span = ((caddr_t)sg) - (caddr_t)Message_Ptr; bcopy ((caddr_t)Message_Ptr, (caddr_t)NewMessage_Ptr, span); bcopy ((caddr_t)(sg-1), ((caddr_t)NewMessage_Ptr) + span, MessageSizeInBytes - span); free (Message_Ptr, M_TEMP); sg = (PI2O_SGE_SIMPLE_ELEMENT) (((caddr_t)NewMessage_Ptr) + span); Message_Ptr = NewMessage_Ptr; } } if ((error) || ((I2O_FLAGS_COUNT_getFlags(&(sg->FlagsCount)) & I2O_SGL_FLAGS_LAST_ELEMENT) != 0)) { break; } ++sg; } if (error) { while ((elm = SLIST_FIRST(&sgList)) != (struct ioctlSgList_S *)NULL) { SLIST_REMOVE_HEAD(&sgList,link); free (elm, M_TEMP); } free (Reply_Ptr, M_TEMP); free (Message_Ptr, M_TEMP); return (error); } } debug_usr_cmd_printf ("Inbound: "); debug_usr_cmd_dump_message(Message_Ptr); /* Send the command */ if ((ccb = asr_alloc_ccb (sc)) == (union asr_ccb *)NULL) { /* Free up in-kernel buffers */ while ((elm = SLIST_FIRST(&sgList)) != (struct ioctlSgList_S *)NULL) { SLIST_REMOVE_HEAD(&sgList,link); free (elm, M_TEMP); } free (Reply_Ptr, M_TEMP); free (Message_Ptr, M_TEMP); return (ENOMEM); } /* * We do not need any (optional byteswapping) method access to * the Initiator context field. */ I2O_MESSAGE_FRAME_setInitiatorContext64( (PI2O_MESSAGE_FRAME)Message_Ptr, (long)ccb); (void)ASR_queue (sc, (PI2O_MESSAGE_FRAME)Message_Ptr); free (Message_Ptr, M_TEMP); /* * Wait for the board to report a finished instruction. */ s = splcam(); while (ccb->ccb_h.status == CAM_REQ_INPROG) { if (ASR_getBlinkLedCode(sc)) { /* Reset Adapter */ printf ("asr%d: Blink LED 0x%x resetting adapter\n", cam_sim_unit(xpt_path_sim(ccb->ccb_h.path)), ASR_getBlinkLedCode(sc)); ASR_reset (sc); splx(s); /* Command Cleanup */ ASR_ccbRemove(sc, ccb); /* Free up in-kernel buffers */ while ((elm = SLIST_FIRST(&sgList)) != (struct ioctlSgList_S *)NULL) { SLIST_REMOVE_HEAD(&sgList,link); free (elm, M_TEMP); } free (Reply_Ptr, M_TEMP); asr_free_ccb(ccb); return (EIO); } /* Check every second for BlinkLed */ /* There is no PRICAM, but outwardly PRIBIO is functional */ tsleep((caddr_t)ccb, PRIBIO, "asr", hz); } splx(s); debug_usr_cmd_printf ("Outbound: "); debug_usr_cmd_dump_message(Reply_Ptr); I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode( &(Reply_Ptr->StdReplyFrame), (ccb->ccb_h.status != CAM_REQ_CMP)); if (ReplySizeInBytes >= (sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME) - I2O_SCSI_SENSE_DATA_SZ - sizeof(U32))) { I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_setTransferCount(Reply_Ptr, ccb->csio.dxfer_len - ccb->csio.resid); } if ((ccb->ccb_h.status & CAM_AUTOSNS_VALID) && (ReplySizeInBytes > (sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME) - I2O_SCSI_SENSE_DATA_SZ))) { int size = ReplySizeInBytes - sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME) - I2O_SCSI_SENSE_DATA_SZ; if (size > sizeof(ccb->csio.sense_data)) { size = sizeof(ccb->csio.sense_data); } bcopy ((caddr_t)&(ccb->csio.sense_data), (caddr_t)Reply_Ptr->SenseData, size); I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_setAutoSenseTransferCount( Reply_Ptr, size); } /* Free up in-kernel buffers */ while ((elm = SLIST_FIRST(&sgList)) != (struct ioctlSgList_S *)NULL) { /* Copy out as necessary */ if ((error == 0) /* DIR bit considered `valid', error due to ignorance works */ && ((I2O_FLAGS_COUNT_getFlags(&(elm->FlagsCount)) & I2O_SGL_FLAGS_DIR) == 0)) { error = copyout ((caddr_t)(elm->KernelSpace), elm->UserSpace, I2O_FLAGS_COUNT_getCount(&(elm->FlagsCount))); } SLIST_REMOVE_HEAD(&sgList,link); free (elm, M_TEMP); } if (error == 0) { /* Copy reply frame to user space */ error = copyout ((caddr_t)Reply_Ptr, (caddr_t)Reply, ReplySizeInBytes); } free (Reply_Ptr, M_TEMP); asr_free_ccb(ccb); return (error); } /* ASR_queue_i */ /*----------------------------------------------------------------------*/ /* Function asr_ioctl */ /*----------------------------------------------------------------------*/ /* The parameters passed to this function are : */ /* dev : Device number. */ /* cmd : Ioctl Command */ /* data : User Argument Passed In. */ /* flag : Mode Parameter */ /* proc : Process Parameter */ /* */ /* This function is the user interface into this adapter driver */ /* */ /* Return : zero if OK, error code if not */ /*----------------------------------------------------------------------*/ STATIC int asr_ioctl( IN dev_t dev, IN u_long cmd, INOUT caddr_t data, int flag, struct proc * proc) { int i, j; OUT int error = 0; Asr_softc_t * sc = ASR_get_sc (dev); UNREFERENCED_PARAMETER(flag); UNREFERENCED_PARAMETER(proc); if (sc != (Asr_softc_t *)NULL) switch(cmd) { case DPT_SIGNATURE: # if (dsDescription_size != 50) case DPT_SIGNATURE + ((50 - dsDescription_size) << 16): # endif if (cmd & 0xFFFF0000) { (void)bcopy ((caddr_t)(&ASR_sig), data, sizeof(dpt_sig_S)); return (0); } /* Traditional version of the ioctl interface */ case DPT_SIGNATURE & 0x0000FFFF: return (copyout ((caddr_t)(&ASR_sig), *((caddr_t *)data), sizeof(dpt_sig_S))); /* Traditional version of the ioctl interface */ case DPT_CTRLINFO & 0x0000FFFF: case DPT_CTRLINFO: { struct { u_int16_t length; u_int16_t drvrHBAnum; u_int32_t baseAddr; u_int16_t blinkState; u_int8_t pciBusNum; u_int8_t pciDeviceNum; u_int16_t hbaFlags; u_int16_t Interrupt; u_int32_t reserved1; u_int32_t reserved2; u_int32_t reserved3; } CtlrInfo; bzero (&CtlrInfo, sizeof(CtlrInfo)); CtlrInfo.length = sizeof(CtlrInfo) - sizeof(u_int16_t); CtlrInfo.drvrHBAnum = asr_unit(dev); CtlrInfo.baseAddr = (u_long)sc->ha_Base; i = ASR_getBlinkLedCode (sc); if (i == -1) { i = 0; } CtlrInfo.blinkState = i; CtlrInfo.pciBusNum = sc->ha_pciBusNum; CtlrInfo.pciDeviceNum = sc->ha_pciDeviceNum; #define FLG_OSD_PCI_VALID 0x0001 #define FLG_OSD_DMA 0x0002 #define FLG_OSD_I2O 0x0004 CtlrInfo.hbaFlags = FLG_OSD_PCI_VALID | FLG_OSD_DMA | FLG_OSD_I2O; CtlrInfo.Interrupt = sc->ha_irq; if (cmd & 0xFFFF0000) { bcopy (&CtlrInfo, data, sizeof(CtlrInfo)); } else { error = copyout (&CtlrInfo, *(caddr_t *)data, sizeof(CtlrInfo)); } } return (error); /* Traditional version of the ioctl interface */ case DPT_SYSINFO & 0x0000FFFF: case DPT_SYSINFO: { sysInfo_S Info; caddr_t c_addr; /* Kernel Specific ptok `hack' */ # define ptok(a) ((char *)(a) + KERNBASE) bzero (&Info, sizeof(Info)); outb (0x70, 0x12); i = inb(0x71); j = i >> 4; if (i == 0x0f) { outb (0x70, 0x19); j = inb (0x71); } Info.drive0CMOS = j; j = i & 0x0f; if (i == 0x0f) { outb (0x70, 0x1a); j = inb (0x71); } Info.drive1CMOS = j; Info.numDrives = *((char *)ptok(0x475)); Info.processorFamily = ASR_sig.dsProcessorFamily; switch (cpu) { case CPU_386SX: case CPU_386: Info.processorType = PROC_386; break; case CPU_486SX: case CPU_486: Info.processorType = PROC_486; break; case CPU_586: Info.processorType = PROC_PENTIUM; break; case CPU_686: Info.processorType = PROC_SEXIUM; break; } Info.osType = OS_BSDI_UNIX; Info.osMajorVersion = osrelease[0] - '0'; Info.osMinorVersion = osrelease[2] - '0'; /* Info.osRevision = 0; */ /* Info.osSubRevision = 0; */ Info.busType = SI_PCI_BUS; Info.flags = SI_CMOS_Valid | SI_NumDrivesValid | SI_OSversionValid |SI_BusTypeValid; /* Go Out And Look For SmartROM */ for(i = 0; i < 3; ++i) { int k; if (i == 0) { j = 0xC8000; } else if (i == 1) { j = 0xD8000; } else { j = 0xDC000; } c_addr = ptok(j); if (*((unsigned short *)c_addr) != 0xAA55) { continue; } if (*((u_long *)(c_addr + 6)) != 0x202053) { continue; } if (*((u_long *)(c_addr + 10)) != 0x545044) { continue; } c_addr += 0x24; for (k = 0; k < 64; ++k) { if ((*((unsigned char *)(c_addr++)) == ' ') && (*((unsigned char *)(c_addr)) == 'v')) { break; } } if (k < 64) { Info.smartROMMajorVersion = *((unsigned char *)(c_addr += 3)) - '0'; Info.smartROMMinorVersion = *((unsigned char *)(c_addr += 2)); Info.smartROMRevision = *((unsigned char *)(++c_addr)); Info.flags |= SI_SmartROMverValid; break; } } if (i >= 3) { Info.flags |= SI_NO_SmartROM; } /* Get The Conventional Memory Size From CMOS */ outb (0x70, 0x16); j = inb (0x71); j <<= 8; outb (0x70, 0x15); j |= inb(0x71); Info.conventionalMemSize = j; /* Get The Extended Memory Found At Power On From CMOS */ outb (0x70, 0x31); j = inb (0x71); j <<= 8; outb (0x70, 0x30); j |= inb(0x71); Info.extendedMemSize = j; Info.flags |= SI_MemorySizeValid; # if (defined(THIS_IS_BROKEN)) /* If There Is 1 or 2 Drives Found, Set Up Drive Parameters */ if (Info.numDrives > 0) { /* * Get The Pointer From Int 41 For The First * Drive Parameters */ j = ((unsigned)(*((unsigned short *)ptok(0x104+2))) << 4) + (unsigned)(*((unsigned short *)ptok(0x104+0))); /* * It appears that SmartROM's Int41/Int46 pointers * use memory that gets stepped on by the kernel * loading. We no longer have access to this * geometry information but try anyways (!?) */ Info.drives[0].cylinders = *((unsigned char *)ptok(j)); ++j; Info.drives[0].cylinders += ((int)*((unsigned char *) ptok(j))) << 8; ++j; Info.drives[0].heads = *((unsigned char *)ptok(j)); j += 12; Info.drives[0].sectors = *((unsigned char *)ptok(j)); Info.flags |= SI_DriveParamsValid; if ((Info.drives[0].cylinders == 0) || (Info.drives[0].heads == 0) || (Info.drives[0].sectors == 0)) { Info.flags &= ~SI_DriveParamsValid; } if (Info.numDrives > 1) { /* * Get The Pointer From Int 46 For The * Second Drive Parameters */ j = ((unsigned)(*((unsigned short *)ptok(0x118+2))) << 4) + (unsigned)(*((unsigned short *)ptok(0x118+0))); Info.drives[1].cylinders = *((unsigned char *) ptok(j)); ++j; Info.drives[1].cylinders += ((int) *((unsigned char *)ptok(j))) << 8; ++j; Info.drives[1].heads = *((unsigned char *) ptok(j)); j += 12; Info.drives[1].sectors = *((unsigned char *) ptok(j)); if ((Info.drives[1].cylinders == 0) || (Info.drives[1].heads == 0) || (Info.drives[1].sectors == 0)) { Info.flags &= ~SI_DriveParamsValid; } } } # endif /* Copy Out The Info Structure To The User */ if (cmd & 0xFFFF0000) { bcopy (&Info, data, sizeof(Info)); } else { error = copyout (&Info, *(caddr_t *)data, sizeof(Info)); } return (error); } /* Get The BlinkLED State */ case DPT_BLINKLED: i = ASR_getBlinkLedCode (sc); if (i == -1) { i = 0; } if (cmd & 0xFFFF0000) { bcopy ((caddr_t)(&i), data, sizeof(i)); } else { error = copyout (&i, *(caddr_t *)data, sizeof(i)); } break; /* Get performance metrics */ #ifdef ASR_MEASURE_PERFORMANCE case DPT_PERF_INFO: bcopy((caddr_t) &sc->ha_performance, data, sizeof(sc->ha_performance)); return (0); #endif /* Send an I2O command */ case I2OUSRCMD: return (ASR_queue_i (sc, *((PI2O_MESSAGE_FRAME *)data))); /* Reset and re-initialize the adapter */ case I2ORESETCMD: ASR_reset (sc); return (0); /* Rescan the LCT table and resynchronize the information */ case I2ORESCANCMD: return (ASR_rescan (sc)); } return (EINVAL); } /* asr_ioctl */ #ifdef ASR_MEASURE_PERFORMANCE /* * This function subtracts one timeval structure from another, * Returning the result in usec. * It assumes that less than 4 billion usecs passed form start to end. * If times are sensless, 0xffffffff is returned. */ STATIC u_int32_t asr_time_delta( IN struct timeval start, IN struct timeval end) { OUT u_int32_t result; if (start.tv_sec > end.tv_sec) { result = 0xffffffff; } else { if (start.tv_sec == end.tv_sec) { if (start.tv_usec > end.tv_usec) { result = 0xffffffff; } else { return (end.tv_usec - start.tv_usec); } } else { return (end.tv_sec - start.tv_sec) * 1000000 + end.tv_usec + (1000000 - start.tv_usec); } } return(result); } /* asr_time_delta */ #endif