mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-01 08:27:59 +00:00
986bbba9a6
On Armada8k boards various peripherals (e.g. USB) have interrupt lines connected to on of the ICU interrupt controllers. After an interrupt is detected it triggers MSI to a given address, with a programmed value. This in turn triggers an SPI interrupt. Normally MSI vector should be allocated by ICUs parent and set during interrupt allocation. Instead of doing that we relied on the ICU being pre-configured in firmware. This worked with EDK2 and older versions of U-Boot, but in the newer ones that is no longer the case. Extend ICU msi-parents - GICP and SEI to support MSI interface and use it during interrupt allocation. This allows us to boot on Armada 7k/8k SoCs independent from the firmware configuration and successfully use modern U-Boot + device tree. For SATA interrupts we need to apply a WA previously done in firmware. We have two SATA ports connected to one controller. Each ports gets its own interrupt, but only one of them is described in dts, also ahci_generic driver expects only one irq too. Fix it by mapping both interrupts to the same MSI when one of them is allocated, which allows us to use both SATA ports. Reviewed by: mmel, mw Obtained from: Semihalf Sponsored by: Marvell Differential Revision: https://reviews.freebsd.org/D28803
468 lines
12 KiB
C
468 lines
12 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
*
|
|
* Copyright (c) 2018 Rubicon Communications, LLC (Netgate)
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/intr.h>
|
|
|
|
#include <dev/fdt/simplebus.h>
|
|
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_bus_subr.h>
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
#include "pic_if.h"
|
|
#include "msi_if.h"
|
|
|
|
#define ICU_TYPE_NSR 1
|
|
#define ICU_TYPE_SEI 2
|
|
|
|
#define ICU_GRP_NSR 0x0
|
|
#define ICU_GRP_SR 0x1
|
|
#define ICU_GRP_SEI 0x4
|
|
#define ICU_GRP_REI 0x5
|
|
|
|
#define ICU_SETSPI_NSR_AL 0x10
|
|
#define ICU_SETSPI_NSR_AH 0x14
|
|
#define ICU_CLRSPI_NSR_AL 0x18
|
|
#define ICU_CLRSPI_NSR_AH 0x1c
|
|
#define ICU_SETSPI_SEI_AL 0x50
|
|
#define ICU_SETSPI_SEI_AH 0x54
|
|
#define ICU_INT_CFG(x) (0x100 + (x) * 4)
|
|
#define ICU_INT_ENABLE (1 << 24)
|
|
#define ICU_INT_EDGE (1 << 28)
|
|
#define ICU_INT_GROUP_SHIFT 29
|
|
#define ICU_INT_MASK 0x3ff
|
|
|
|
#define ICU_INT_SATA0 109
|
|
#define ICU_INT_SATA1 107
|
|
|
|
#define MV_CP110_ICU_MAX_NIRQS 207
|
|
|
|
#define MV_CP110_ICU_CLRSPI_OFFSET 0x8
|
|
|
|
struct mv_cp110_icu_softc {
|
|
device_t dev;
|
|
device_t parent;
|
|
struct resource *res;
|
|
struct intr_map_data_fdt *parent_map_data;
|
|
bool initialized;
|
|
int type;
|
|
};
|
|
|
|
static struct resource_spec mv_cp110_icu_res_spec[] = {
|
|
{ SYS_RES_MEMORY, 0, RF_ACTIVE | RF_SHAREABLE },
|
|
{ -1, 0 }
|
|
};
|
|
|
|
static struct ofw_compat_data compat_data[] = {
|
|
{"marvell,cp110-icu-nsr", ICU_TYPE_NSR},
|
|
{"marvell,cp110-icu-sei", ICU_TYPE_SEI},
|
|
{NULL, 0}
|
|
};
|
|
|
|
#define RD4(sc, reg) bus_read_4((sc)->res, (reg))
|
|
#define WR4(sc, reg, val) bus_write_4((sc)->res, (reg), (val))
|
|
|
|
static int
|
|
mv_cp110_icu_probe(device_t dev)
|
|
{
|
|
|
|
if (!ofw_bus_status_okay(dev))
|
|
return (ENXIO);
|
|
|
|
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "Marvell Interrupt Consolidation Unit");
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
mv_cp110_icu_attach(device_t dev)
|
|
{
|
|
struct mv_cp110_icu_softc *sc;
|
|
phandle_t node, msi_parent;
|
|
uint32_t reg, icu_grp;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->dev = dev;
|
|
node = ofw_bus_get_node(dev);
|
|
sc->type = (int)ofw_bus_search_compatible(dev, compat_data)->ocd_data;
|
|
sc->initialized = false;
|
|
|
|
if (OF_getencprop(node, "msi-parent", &msi_parent,
|
|
sizeof(phandle_t)) <= 0) {
|
|
device_printf(dev, "cannot find msi-parent property\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
if ((sc->parent = OF_device_from_xref(msi_parent)) == NULL) {
|
|
device_printf(dev, "cannot find msi-parent device\n");
|
|
return (ENXIO);
|
|
}
|
|
if (bus_alloc_resources(dev, mv_cp110_icu_res_spec, &sc->res) != 0) {
|
|
device_printf(dev, "cannot allocate resources for device\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
if (intr_pic_register(dev, OF_xref_from_node(node)) == NULL) {
|
|
device_printf(dev, "Cannot register ICU\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Allocate GICP/SEI compatible mapping entry (2 cells) */
|
|
sc->parent_map_data = (struct intr_map_data_fdt *)intr_alloc_map_data(
|
|
INTR_MAP_DATA_FDT, sizeof(struct intr_map_data_fdt) +
|
|
+ 3 * sizeof(phandle_t), M_WAITOK | M_ZERO);
|
|
|
|
/* Clear any previous mapping done by firmware. */
|
|
for (i = 0; i < MV_CP110_ICU_MAX_NIRQS; i++) {
|
|
reg = RD4(sc, ICU_INT_CFG(i));
|
|
icu_grp = reg >> ICU_INT_GROUP_SHIFT;
|
|
|
|
if (icu_grp == ICU_GRP_NSR || icu_grp == ICU_GRP_SEI)
|
|
WR4(sc, ICU_INT_CFG(i), 0);
|
|
}
|
|
|
|
return (0);
|
|
|
|
fail:
|
|
bus_release_resources(dev, mv_cp110_icu_res_spec, &sc->res);
|
|
return (ENXIO);
|
|
}
|
|
|
|
static struct intr_map_data *
|
|
mv_cp110_icu_convert_map_data(struct mv_cp110_icu_softc *sc, struct intr_map_data *data)
|
|
{
|
|
struct intr_map_data_fdt *daf;
|
|
uint32_t reg, irq_no, irq_type;
|
|
|
|
daf = (struct intr_map_data_fdt *)data;
|
|
if (daf->ncells != 2)
|
|
return (NULL);
|
|
|
|
irq_no = daf->cells[0];
|
|
if (irq_no >= MV_CP110_ICU_MAX_NIRQS)
|
|
return (NULL);
|
|
|
|
irq_type = daf->cells[1];
|
|
if (irq_type != IRQ_TYPE_LEVEL_HIGH &&
|
|
irq_type != IRQ_TYPE_EDGE_RISING)
|
|
return (NULL);
|
|
|
|
/* ICU -> GICP/SEI mapping is set in mv_cp110_icu_map_intr. */
|
|
reg = RD4(sc, ICU_INT_CFG(irq_no));
|
|
|
|
/* Construct GICP compatible mapping. */
|
|
sc->parent_map_data->ncells = 2;
|
|
sc->parent_map_data->cells[0] = reg & ICU_INT_MASK;
|
|
sc->parent_map_data->cells[1] = irq_type;
|
|
|
|
return ((struct intr_map_data *)sc->parent_map_data);
|
|
}
|
|
|
|
static int
|
|
mv_cp110_icu_detach(device_t dev)
|
|
{
|
|
|
|
return (EBUSY);
|
|
}
|
|
|
|
static int
|
|
mv_cp110_icu_activate_intr(device_t dev, struct intr_irqsrc *isrc,
|
|
struct resource *res, struct intr_map_data *data)
|
|
{
|
|
struct mv_cp110_icu_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
data = mv_cp110_icu_convert_map_data(sc, data);
|
|
if (data == NULL)
|
|
return (EINVAL);
|
|
return (PIC_ACTIVATE_INTR(sc->parent, isrc, res, data));
|
|
}
|
|
|
|
static void
|
|
mv_cp110_icu_enable_intr(device_t dev, struct intr_irqsrc *isrc)
|
|
{
|
|
struct mv_cp110_icu_softc *sc;
|
|
sc = device_get_softc(dev);
|
|
|
|
PIC_ENABLE_INTR(sc->parent, isrc);
|
|
}
|
|
|
|
static void
|
|
mv_cp110_icu_disable_intr(device_t dev, struct intr_irqsrc *isrc)
|
|
{
|
|
struct mv_cp110_icu_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
PIC_DISABLE_INTR(sc->parent, isrc);
|
|
}
|
|
|
|
static void
|
|
mv_cp110_icu_init(struct mv_cp110_icu_softc *sc, uint64_t addr)
|
|
{
|
|
|
|
if (sc->initialized)
|
|
return;
|
|
|
|
switch (sc->type) {
|
|
case ICU_TYPE_NSR:
|
|
WR4(sc, ICU_SETSPI_NSR_AL, addr & UINT32_MAX);
|
|
WR4(sc, ICU_SETSPI_NSR_AH, (addr >> 32) & UINT32_MAX);
|
|
addr += MV_CP110_ICU_CLRSPI_OFFSET;
|
|
WR4(sc, ICU_CLRSPI_NSR_AL, addr & UINT32_MAX);
|
|
WR4(sc, ICU_CLRSPI_NSR_AH, (addr >> 32) & UINT32_MAX);
|
|
break;
|
|
case ICU_TYPE_SEI:
|
|
WR4(sc, ICU_SETSPI_SEI_AL, addr & UINT32_MAX);
|
|
WR4(sc, ICU_SETSPI_SEI_AH, (addr >> 32) & UINT32_MAX);
|
|
break;
|
|
default:
|
|
panic("Unkown ICU type.");
|
|
}
|
|
|
|
sc->initialized = true;
|
|
}
|
|
|
|
static int
|
|
mv_cp110_icu_map_intr(device_t dev, struct intr_map_data *data,
|
|
struct intr_irqsrc **isrcp)
|
|
{
|
|
struct mv_cp110_icu_softc *sc;
|
|
struct intr_map_data_fdt *daf;
|
|
uint32_t vector, irq_no, irq_type;
|
|
uint64_t addr;
|
|
int ret;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (data->type != INTR_MAP_DATA_FDT)
|
|
return (ENOTSUP);
|
|
|
|
/* Parse original */
|
|
daf = (struct intr_map_data_fdt *)data;
|
|
if (daf->ncells != 2)
|
|
return (EINVAL);
|
|
|
|
irq_no = daf->cells[0];
|
|
if (irq_no >= MV_CP110_ICU_MAX_NIRQS)
|
|
return (EINVAL);
|
|
|
|
irq_type = daf->cells[1];
|
|
if (irq_type != IRQ_TYPE_LEVEL_HIGH &&
|
|
irq_type != IRQ_TYPE_EDGE_RISING)
|
|
return (EINVAL);
|
|
|
|
/*
|
|
* Allocate MSI vector.
|
|
* We don't use intr_alloc_msi wrapper, since it registers a new irq
|
|
* in the kernel. In our case irq was already added by the ofw code.
|
|
*/
|
|
ret = MSI_ALLOC_MSI(sc->parent, dev, 1, 1, NULL, isrcp);
|
|
if (ret != 0)
|
|
return (ret);
|
|
|
|
ret = MSI_MAP_MSI(sc->parent, dev, *isrcp, &addr, &vector);
|
|
if (ret != 0)
|
|
goto fail;
|
|
|
|
mv_cp110_icu_init(sc, addr);
|
|
vector |= ICU_INT_ENABLE;
|
|
|
|
if (sc->type == ICU_TYPE_NSR)
|
|
vector |= ICU_GRP_NSR << ICU_INT_GROUP_SHIFT;
|
|
else
|
|
vector |= ICU_GRP_SEI << ICU_INT_GROUP_SHIFT;
|
|
|
|
if (irq_type & IRQ_TYPE_EDGE_BOTH)
|
|
vector |= ICU_INT_EDGE;
|
|
|
|
WR4(sc, ICU_INT_CFG(irq_no), vector);
|
|
|
|
/*
|
|
* SATA controller has two ports, each gets its own interrupt.
|
|
* The problem is that only one irq is described in dts.
|
|
* Also ahci_generic driver supports only one irq per controller.
|
|
* As a workaround map both interrupts when one of them is allocated.
|
|
* This allows us to use both SATA ports.
|
|
*/
|
|
if (irq_no == ICU_INT_SATA0)
|
|
WR4(sc, ICU_INT_CFG(ICU_INT_SATA1), vector);
|
|
if (irq_no == ICU_INT_SATA1)
|
|
WR4(sc, ICU_INT_CFG(ICU_INT_SATA0), vector);
|
|
|
|
(*isrcp)->isrc_dev = sc->dev;
|
|
return (ret);
|
|
|
|
fail:
|
|
if (*isrcp != NULL)
|
|
MSI_RELEASE_MSI(sc->parent, dev, 1, isrcp);
|
|
|
|
return (ret);
|
|
}
|
|
|
|
static int
|
|
mv_cp110_icu_deactivate_intr(device_t dev, struct intr_irqsrc *isrc,
|
|
struct resource *res, struct intr_map_data *data)
|
|
{
|
|
struct mv_cp110_icu_softc *sc;
|
|
struct intr_map_data_fdt *daf;
|
|
int irq_no, ret;
|
|
|
|
if (data->type != INTR_MAP_DATA_FDT)
|
|
return (ENOTSUP);
|
|
|
|
sc = device_get_softc(dev);
|
|
daf = (struct intr_map_data_fdt *)data;
|
|
if (daf->ncells != 2)
|
|
return (EINVAL);
|
|
|
|
irq_no = daf->cells[0];
|
|
data = mv_cp110_icu_convert_map_data(sc, data);
|
|
if (data == NULL)
|
|
return (EINVAL);
|
|
|
|
/* Clear the mapping. */
|
|
WR4(sc, ICU_INT_CFG(irq_no), 0);
|
|
|
|
ret = PIC_DEACTIVATE_INTR(sc->parent, isrc, res, data);
|
|
if (ret != 0)
|
|
return (ret);
|
|
|
|
return (MSI_RELEASE_MSI(sc->parent, dev, 1, &isrc));
|
|
}
|
|
|
|
static int
|
|
mv_cp110_icu_setup_intr(device_t dev, struct intr_irqsrc *isrc,
|
|
struct resource *res, struct intr_map_data *data)
|
|
{
|
|
struct mv_cp110_icu_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
data = mv_cp110_icu_convert_map_data(sc, data);
|
|
if (data == NULL)
|
|
return (EINVAL);
|
|
|
|
return (PIC_SETUP_INTR(sc->parent, isrc, res, data));
|
|
}
|
|
|
|
static int
|
|
mv_cp110_icu_teardown_intr(device_t dev, struct intr_irqsrc *isrc,
|
|
struct resource *res, struct intr_map_data *data)
|
|
{
|
|
struct mv_cp110_icu_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
data = mv_cp110_icu_convert_map_data(sc, data);
|
|
if (data == NULL)
|
|
return (EINVAL);
|
|
|
|
return (PIC_TEARDOWN_INTR(sc->parent, isrc, res, data));
|
|
}
|
|
|
|
static void
|
|
mv_cp110_icu_pre_ithread(device_t dev, struct intr_irqsrc *isrc)
|
|
{
|
|
struct mv_cp110_icu_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
PIC_PRE_ITHREAD(sc->parent, isrc);
|
|
}
|
|
|
|
static void
|
|
mv_cp110_icu_post_ithread(device_t dev, struct intr_irqsrc *isrc)
|
|
{
|
|
struct mv_cp110_icu_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
PIC_POST_ITHREAD(sc->parent, isrc);
|
|
}
|
|
|
|
static void
|
|
mv_cp110_icu_post_filter(device_t dev, struct intr_irqsrc *isrc)
|
|
{
|
|
struct mv_cp110_icu_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
PIC_POST_FILTER(sc->parent, isrc);
|
|
}
|
|
|
|
static device_method_t mv_cp110_icu_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, mv_cp110_icu_probe),
|
|
DEVMETHOD(device_attach, mv_cp110_icu_attach),
|
|
DEVMETHOD(device_detach, mv_cp110_icu_detach),
|
|
|
|
/* Interrupt controller interface */
|
|
DEVMETHOD(pic_activate_intr, mv_cp110_icu_activate_intr),
|
|
DEVMETHOD(pic_disable_intr, mv_cp110_icu_disable_intr),
|
|
DEVMETHOD(pic_enable_intr, mv_cp110_icu_enable_intr),
|
|
DEVMETHOD(pic_map_intr, mv_cp110_icu_map_intr),
|
|
DEVMETHOD(pic_deactivate_intr, mv_cp110_icu_deactivate_intr),
|
|
DEVMETHOD(pic_setup_intr, mv_cp110_icu_setup_intr),
|
|
DEVMETHOD(pic_teardown_intr, mv_cp110_icu_teardown_intr),
|
|
DEVMETHOD(pic_post_filter, mv_cp110_icu_post_filter),
|
|
DEVMETHOD(pic_post_ithread, mv_cp110_icu_post_ithread),
|
|
DEVMETHOD(pic_pre_ithread, mv_cp110_icu_pre_ithread),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static devclass_t mv_cp110_icu_devclass;
|
|
|
|
static driver_t mv_cp110_icu_driver = {
|
|
"mv_cp110_icu",
|
|
mv_cp110_icu_methods,
|
|
sizeof(struct mv_cp110_icu_softc),
|
|
};
|
|
|
|
EARLY_DRIVER_MODULE(mv_cp110_icu, mv_cp110_icu_bus, mv_cp110_icu_driver,
|
|
mv_cp110_icu_devclass, 0, 0, BUS_PASS_INTERRUPT + BUS_PASS_ORDER_LAST);
|