Ulf Lilleengen a468c003ef - When writing metadata to a geom provider, open the it as read-write since it ... might do subsequent reads from other providers. This stopped geli (and probably other classes using g_metadata_store as well) from being put on top of gvinum raid5 volumes. Note: The reason it fails in the gvinum raid5 case is that gvinum will read back the old parity stripe before calculating the new parity stripe to be written out again. The write will then fail because the underlying disk to be read is opened write only. MFC after: 1 week		2008-12-13 14:14:56 +00:00
..
adjkerntz
atacontrol	Make atacontrol(8) rebuild work when /usr is not mounted or from /rescue	2008-08-06 18:08:02 +00:00
atm	Remove netatm from HEAD as it is not MPSAFE and relies on the now removed	2008-05-25 22:11:40 +00:00
badsect
bsdlabel	o One more s/gpt/gpart/.	2008-11-05 09:28:30 +00:00
camcontrol
ccdconfig
clri
comcontrol
conscontrol
ddb	DDB scripting, textdumps, output capture, etc, all will appear in	2008-08-03 14:27:06 +00:00
devd	No need to be gratuitously style(9) non-compliant here, even though	2008-03-21 20:38:28 +00:00
devfs	Support for filtering on major device number was removed in rev. 1.7 or	2008-06-27 09:09:50 +00:00
dhclient	Support the remaining options listed in dhcp-options(5) and RFC 2132.	2008-10-17 13:28:53 +00:00
dmesg
dump	Expand dump to allow MAX_INT dump levels.	2008-05-24 05:20:46 +00:00
dumpfs
dumpon
fdisk	- Improve error message given on g_providername call failure.	2008-09-30 07:18:49 +00:00
fdisk_pc98
ffsinfo
fsck
fsck_ffs	Background fsck applies twice some summary totals changes. The next	2008-10-13 14:01:05 +00:00
fsck_msdosfs
fsdb
fsirand
gbde
geom	- When writing metadata to a geom provider, open the it as read-write since it	2008-12-13 14:14:56 +00:00
ggate	The signature for a pthread function requires that it	2008-06-26 07:05:35 +00:00
growfs
gvinum
idmapd
ifconfig	Tiny wording nits.	2008-10-19 09:45:29 +00:00
init	Static-ify procedures in init(8).	2008-09-27 00:09:10 +00:00
ipf
ipfw	o Remove a debug code and restore an accidentally deleted code	2008-10-14 17:59:39 +00:00
iscontrol	Big update to the iSCSI initiator code. Highlights include IPv6 support,	2008-11-25 07:17:11 +00:00
kldconfig
kldload
kldstat
kldunload
ldconfig
mca
md5	Bring a paragraph in this manual page a bit closer to the present date.	2008-09-07 15:19:34 +00:00
mdconfig	Add -v (verbose) option to -l command, to show size and backing store	2008-06-21 15:04:42 +00:00
mdmfs
mknod
mksnap_ffs	Note that snapshots may cause a panic on the full UFS filesystem.	2008-07-26 13:18:33 +00:00
mount	Don't return always 0. Return what we get from exec_mountprog or	2008-08-31 20:08:05 +00:00
mount_autofs
mount_cd9660
mount_ext2fs
mount_hpfs
mount_msdosfs	Noticed the following error message:	2008-11-29 02:28:05 +00:00
mount_nfs	Implement support for RPCSEC_GSS authentication to both the NFS client	2008-11-03 10:38:00 +00:00
mount_ntfs
mount_nullfs
mount_reiserfs
mount_std
mount_udf
mount_unionfs
natd	Check rule numbers against maximum value to avoid rules cleanup due	2008-09-06 17:26:52 +00:00
newfs	Move the check for the ending char in the partition name where	2008-12-12 15:56:38 +00:00
newfs_msdos	Fix build - cast off_t to (intmax_t) for printing.	2008-12-03 23:00:57 +00:00
nfsiod
nos-tun
pfctl
pflogd
ping
ping6	Implement -R support, similar to ping(8)'s -A.	2008-08-27 15:01:23 +00:00
quotacheck	Drag this code kicking and screaming into the twenty-first century.	2008-07-02 15:51:59 +00:00
rcorder	Document the misleading nature of the REQUIRE line. The patch in	2008-06-09 09:07:58 +00:00
reboot
recoverdisk
restore	Fix nits pointed out in PR bin/39905 that have not already been	2008-05-23 19:17:08 +00:00
route	Fix printing of sockaddr prefixes in verbose mode.	2008-04-10 12:16:20 +00:00
routed	Update routed to use the RFC 3678 protocol-independent multicast API. Use	2008-07-30 11:56:15 +00:00
rtsol
savecore
sconfig	Do not set IFF_DEBUG directly from the driver.	2008-06-30 21:18:27 +00:00
setkey	o Add missed dot.	2008-09-29 05:31:27 +00:00
shutdown
slattach
spppcontrol
startslip
sunlabel
swapon	Add a -q flag to swapon(8) to suppress informational messages. Use it in	2008-06-23 22:17:08 +00:00
sysctl	The sysctl(8) program exits on some errors and only emits warnings on	2008-06-23 22:06:28 +00:00
tunefs
umount
Makefile	add new build knobs and jigger some existing controls to improve	2008-09-21 22:02:26 +00:00
Makefile.inc