1
0
mirror of https://git.savannah.gnu.org/git/emacs/org-mode.git synced 2024-11-23 07:18:53 +00:00

Yank adjusted trees.

When yanking a cut/copied subtree or a series of trees, even
the nomal yank key `C-y' does now adjust the level of the tree
to make it fit into the current outline position, without
loosing its identity, and without swallowing other subtrees.

This uses the command `org-past-subtree'.  An additional
change in that command has been implemented:  Normally, this
command picks the right outline level from the surrounding
*visible* headlines, and uses the smaller on.  So it the
cursor is between a level 4 and a level 3 headline, the tree
will be pasted as level 3.  Now, if the cursor is actually
*at* the beginning of a headline, the level of that headline
will be used.  So lets say you have a tree like this:

  * Level one
  ** Level two
  (1)
  (2)* Level one again

with (1) and (2) indicating possible cursor positions for the
insertion.  When at (1), the tree will be pasted as level 2.
When at (2), it will be pasted as level 1.

If you do not like `C-y' to behave like this, configure the
variable `org-yank-adjusted-subtrees'.

Thanks to Samuel Wales for this idea and a partial implementation.
This commit is contained in:
Carsten Dominik 2008-10-28 09:06:01 +01:00
commit 07657f3e80
5 changed files with 103 additions and 18 deletions

View File

@ -45,6 +45,37 @@
Thanks to James JD Smith for a patch to this effect.
*** Yanking subtree with =C-y= now adjusts the tree level
When yanking a cut/copied subtree or a series of trees, even
the nomal yank key =C-y= does now adjust the level of the tree
to make it fit into the current outline position, without
loosing its identity, and without swallowing other subtrees.
This uses the command =org-past-subtree=. An additional
change in that command has been implemented: Normally, this
command picks the right outline level from the surrounding
*visible* headlines, and uses the smaller on. So it the
cursor is between a level 4 and a level 3 headline, the tree
will be pasted as level 3. Now, if the cursor is actually
*at* the beginning of a headline, the level of that headline
will be used. So lets say you have a tree like this:
#+begin_src org
,* Level one
,** Level two
,(1)
,(2)* Level one again
#+end_src
with (1) and (2) indicating possible cursor positions for the
insertion. When at (1), the tree will be pasted as level 2.
When at (2), it will be pasted as level 1.
If you do not like =C-y= to behave like this, configure the
variable =org-yank-adjusted-subtrees=.
Thanks to Samuel Wales for this idea and a partial implementation.
* Version 6.10
** Overview

View File

@ -944,6 +944,12 @@ Yank subtree from kill ring. This does modify the level of the subtree to
make sure the tree fits in nicely at the yank position. The yank level can
also be specified with a numeric prefix argument, or by yanking after a
headline marker like @samp{****}.
@kindex C-y
@item C-y
Depending on the variables @code{org-yank-adjusted-subtrees} and
@code{org-yank-folded-subtrees}, Org's internal @code{yank} command will
paste subtrees folded and in a clever way, using the same command as @kbd{C-c
C-x C-y}.
@kindex C-c C-w
@item C-c C-w
Refile entry to a different location. @xref{Refiling notes}.

View File

@ -316,7 +316,7 @@ are preserved on all copies.
\key{refile subtree}{C-c C-w}
\key{kill subtree}{C-c C-x C-w}
\key{copy subtree}{C-c C-x M-w}
\key{yank subtree}{C-c C-x C-y}
\metax{yank subtree}{C-c C-x C-y or C-y}
\key{narrow buffer to current subtree}{C-x n s}
\key{widen restriction to full buffer}{C-x n w}

View File

@ -1,9 +1,17 @@
2008-10-27 Carsten Dominik <dominik@science.uva.nl>
* org.el ("saveplace"): If saveplace puts point into an invisible
location, make it visible.
(org-make-tags-matcher): Allow inactive time stamps in time
comparisons.
(org-yank-adjusted-subtrees): New option.
(org-yank): Incorporate adjusting trees.
(org-paste-subtree): New argument FOR-YANK which will cause
insertion at point without backing up over white lines, and leave
point at the end of the inserted text. Also if the cursor is
at the beginning of a headline, use the same level or the inserted
tree.
* org-publish.el (org-publish-get-base-files-1): Deal correctly
with broken symlinks

View File

@ -641,6 +641,13 @@ or siblings, then fold all the subtrees."
:group 'org-edit-structure
:type 'boolean)
(defcustom org-yank-adjusted-subtrees t
"Non-nil means, when yanking subtrees, adjust the level.
With this setting, `org-paste-subtree' is used to insert the subtree, see
this function for details."
:group 'org-edit-structure
:type 'boolean)
(defcustom org-M-RET-may-split-line '((default . t))
"Non-nil means, M-RET will split the line at the cursor position.
When nil, it will go to the end of the line before making a
@ -5047,10 +5054,15 @@ useful if the caller implements cut-and-paste as copy-then-paste-then-cut."
(if cut "Cut" "Copied")
(length org-subtree-clip)))))
(defun org-paste-subtree (&optional level tree)
(defun org-paste-subtree (&optional level tree for-yank)
"Paste the clipboard as a subtree, with modification of headline level.
The entire subtree is promoted or demoted in order to match a new headline
level. By default, the new level is derived from the visible headings
level.
If the cursor is at the beginning of a headline, the same level as
that headline is used to paste the tree
If not, the new level is derived from the *visible* headings
before and after the insertion point, and taken to be the inferior headline
level of the two. So if the previous visible heading is level 3 and the
next is level 4 (or vice versa), level 4 will be used for insertion.
@ -5061,9 +5073,11 @@ You can also force a different level, either by using a numeric prefix
argument, or by inserting the heading marker by hand. For example, if the
cursor is after \"*****\", then the tree will be shifted to level 5.
If you want to insert the tree as is, just use \\[yank].
If optional TREE is given, use this text instead of the kill ring.
If optional TREE is given, use this text instead of the kill ring."
When FOR-YANK is set, this is called by `org-yank'. In this case, do not
move back over whitespace before inserting, and move point to the end of
the inserted text when done."
(interactive "P")
(unless (org-kill-is-subtree-p tree)
(error "%s"
@ -5079,9 +5093,14 @@ If optional TREE is given, use this text instead of the kill ring."
(- (match-end 0) (match-beginning 0) 1)
-1))
(force-level (cond (level (prefix-numeric-value level))
((string-match
^re_ (buffer-substring (point-at-bol) (point)))
((and (looking-at "[ \t]*$")
(string-match
^re_ (buffer-substring
(point-at-bol) (point))))
(- (match-end 1) (match-beginning 1)))
((and (bolp)
(looking-at org-outline-regexp))
(- (match-end 0) (point) 1))
(t nil)))
(previous-level (save-excursion
(condition-case nil
@ -5109,16 +5128,17 @@ If optional TREE is given, use this text instead of the kill ring."
(delta (if (> shift 0) -1 1))
(func (if (> shift 0) 'org-demote 'org-promote))
(org-odd-levels-only nil)
beg end)
beg end newend)
;; Remove the forced level indicator
(if force-level
(delete-region (point-at-bol) (point)))
;; Paste
(beginning-of-line 1)
(org-back-over-empty-lines)
(unless for-yank (org-back-over-empty-lines))
(setq beg (point))
(insert-before-markers txt)
(unless (string-match "\n\\'" txt) (insert "\n"))
(setq newend (point))
(org-reinstall-markers-in-region beg)
(setq end (point))
(goto-char beg)
@ -5133,14 +5153,17 @@ If optional TREE is given, use this text instead of the kill ring."
(while (not (= shift 0))
(org-map-region func (point-min) (point-max))
(setq shift (+ delta shift)))
(goto-char (point-min))))
(when (interactive-p)
(goto-char (point-min))
(setq newend (point-max))))
(when (or (interactive-p) for-yank)
(message "Clipboard pasted as level %d subtree" new-level))
(if (and kill-ring
(if (and (not for-yank) ; in this case, org-yank will decide about folding
kill-ring
(eq org-subtree-clip (current-kill 0))
org-subtree-clip-folded)
;; The tree was folded before it was killed/copied
(hide-subtree))))
(hide-subtree))
(and for-yank (goto-char newend))))
(defun org-kill-is-subtree-p (&optional txt)
"Check if the current kill is an outline subtree, or a set of trees.
@ -13872,18 +13895,33 @@ beyond the end of the headline."
(org-set-tags nil t))
(t (kill-region (point) (point-at-eol)))))
(define-key org-mode-map "\C-k" 'org-kill-line)
(defun org-yank ()
"Yank, and if the yanked text is a single subtree, fold it.
In fact, if the yanked text is a sequence of subtrees, fold all of them."
"Yank. If the kill is a subtree, treat it specially.
This command will look at the current kill and check it is a single
subtree, or a series of subtrees[1]. If it passes the test, it is
treated specially, depending on the value of the following variables, both
set by default.
org-yank-folded-subtrees
When set, the subree(s) wiil be folded after insertion.
org-yank-adjusted-subtrees
When set, the subtree will be promoted or demoted in order to
fit into the local outline tree structure.
\[1] Basically, the test checks if the first non-white line is a heading
and if there are no other headings with fewer stars."
(interactive)
(if org-yank-folded-subtrees
(let ((beg (point))
(subtreep (org-kill-is-subtree-p))
end)
(call-interactively 'yank)
(if (and subtreep org-yank-adjusted-subtrees)
(org-paste-subtree nil nil 'for-yank)
(call-interactively 'yank))
(setq end (point))
(goto-char beg)
(when (and (bolp) subtreep)
@ -13897,7 +13935,9 @@ In fact, if the yanked text is a sequence of subtrees, fold all of them."
(error (goto-char end)))))
(goto-char end)
(skip-chars-forward " \t\n\r"))
(call-interactively 'yank)))
(if (and subtreep org-yank-adjusted-subtrees)
(org-paste-subtree nil nil 'for-yank)
(call-interactively 'yank))))
(define-key org-mode-map "\C-y" 'org-yank)