freebsd_amp_hwpstate/contrib/bind/doc/misc/FAQ.1of2

Newsgroups: comp.protocols.tcp-ip.domains,comp.answers,news.answers
Path: vixie!news1.digital.com!su-news-hub1.bbnplanet.com!cpk-news-hub1.bbnplanet.com!news.bbnplanet.com!cam-news-hub1.bbnplanet.com!news.mathworks.com!news.kei.com!uhog.mit.edu!rutgers!njitgw.njit.edu!hertz.njit.edu!cdp2582
From: cdp2582@hertz.njit.edu (Chris Peckham)
Subject: comp.protocols.tcp-ip.domains Frequently Asked Questions (FAQ) (Part 1 of 2)
Message-ID: <cptd-faq-1-849940949@njit.edu>
Followup-To: comp.protocols.tcp-ip.domains
Originator: cdp2582@hertz.njit.edu
Keywords: BIND,DOMAIN,DNS
Sender: news@njit.edu
Supersedes: <cptd-faq-1-847336183@njit.edu>
Nntp-Posting-Host: hertz.njit.edu
X-Posting-Frequency: posted during the first week of each month
Reply-To: domain-faq@njit.edu (comp.protocols.tcp-ip.domains FAQ comments)
Organization: NJIT.EDU - New Jersey Institute of Technology, Newark, NJ, USA
Date: Sat, 7 Dec 1996 06:42:36 GMT
Approved: news-answers-request@MIT.EDU
Expires: Sat 11 Jan 97 02:42:29 EDT
Lines: 1582
Xref: vixie comp.protocols.tcp-ip.domains:12904 comp.answers:22440 news.answers:85682

Posted-By: auto-faq 3.1.1.2
Archive-name: internet/tcp-ip/domains-faq/part1
Revision: 1.14 1996/12/07 06:42:05


Note that this posting has been split into two parts because of its size.

$Id: FAQ.1of2,v 8.4 1996/12/18 04:09:47 vixie Exp $

A new version of this document appears monthly.  If this copy is more
than a month old it may be out of date.

This FAQ is edited and maintained by Chris Peckham, <cdp@pfmc.net>.  The
most recently posted version may be found for anonymous ftp from

rtfm.mit.edu : /pub/usenet/news.answers/internet/tcp-ip/domains-faq

It is also available in HTML from
http://www.users.pfmc.net/~cdp/cptd-faq/.

If you can contribute any answers for items in the TODO section, please do
so by sending e-mail to <domain-faq@pfmc.net> !  If you know of any items
that  are not included and you feel that they should be,  send the
relevant information to <domain-faq@pfmc.net>.

===============================================================================

Index

 Section 1.  TO DO / UPDATES
 Q1.1        Contributions needed 
 Q1.2        UPDATES / Changes since last posting 

 Section 2.  INTRODUCTION / MISCELLANEOUS
 Q2.1        What is this newsgroup ?
 Q2.2        More information
 Q2.3        What is BIND  ?
 Q2.4        What is the difference between BIND and DNS ?
 Q2.5        Where is the latest version of BIND located ?
 Q2.6        How can I find the path taken between two systems/domains ?
 Q2.7        How do you find the hostname given the TCP-IP address ?
 Q2.8        How do I register a domain ?
 Q2.9        How can I change the IP address of our server ?
 Q2.10       Issues when changing your domain name
 Q2.11       How memory and CPU does DNS use ?
 Q2.12       Other things to consider when planning your servers  
 Q2.13       Proper way to get NS and reverse IP records into DNS
 Q2.14       How do I get my address assigned from the NIC ?
 Q2.15       Is there a block of private IP addresses I can use?
 Q2.16       Does BIND cache negative answers (failed DNS lookups) ?
 Q2.17       What does an NS record really do ?
 Q2.18       DNS ports
 Q2.19       What is the cache file 
 Q2.20       Obtaining the latest cache file
 Q2.21       Selecting a nameserver/root cache
 Q2.22       InterNIC and domain names

 Section 3.  UTILITIES 
 Q3.1        Utilities to administer DNS zone files
 Q3.2        DIG - Domain Internet Groper
 Q3.3        DNS packet analyser
 Q3.4        host
 Q3.5        How can I use DNS information in my program?
 Q3.6        A source of information relating to DNS

 Section 4.  DEFINITIONS  
 Q4.1        TCP/IP Host Naming Conventions
 Q4.2        What are slaves and forwarders ?
 Q4.3        When is a server authoritative?
 Q4.4        My server does not consider itself authoritative !
 Q4.5        NS records don't configure servers as authoritative ?
 Q4.6        underscore in host-/domainnames
 Q4.7        What is lame delegation ?
 Q4.8        How can I see if the server is "lame" ?
 Q4.9        What does opt-class field in a zone file do?
 Q4.10       Top level domains
 Q4.11       Classes of networks
 Q4.12       What is CIDR ?
 Q4.13       What is the rule for glue ?

 Section 5.  CONFIGURATION
 Q5.1        Changing a Secondary server to a Primary server ?
 Q5.2        Moving a Primary server to another server
 Q5.3        How do I subnet a Class B Address ?
 Q5.4        Subnetted domain name service
 Q5.5        Recommended format/style of DNS files
 Q5.6        DNS on a system not connected to the Internet
 Q5.7        Multiple Domain configuration
 Q5.8        wildcard MX records
 Q5.9        How do you identify a wildcard MX record ?
 Q5.10       Why are fully qualified domain names recommended ?
 Q5.11       Distributing load using named
 Q5.12       Order of returned records
 Q5.13       resolv.conf
 Q5.14       How do I delegate authority for sub-domains ?
 Q5.15       DNS instead of NIS on a Sun OS 4.1.x system
 Q5.16       Patches to add functionality to BIND 
 Q5.17       How to serve multiple domains from one server

 Section 6.  PROBLEMS
 Q6.1        No address for root server
 Q6.2        Error - No Root Nameservers for Class XX
 Q6.3        Bind 4.9.x and MX querying?
 Q6.4        Do I need to define an A record for localhost ?
 Q6.5        MX records, CNAMES and A records for MX targets
 Q6.6        Can an NS record point to a CNAME ?
 Q6.7        Nameserver forgets own A record
 Q6.8        General problems (core dumps !)
 Q6.9        malloc and DECstations
 Q6.10       Can't resolve names without a "."
 Q6.11       Err/TO errors being reported
 Q6.12       Why does swapping kill BIND ?

 Section 7.  ACKNOWLEDGEMENTS
 Q7.1        How is this FAQ generated ?
 Q7.2        What formats are available ?
 Q7.3        Contributors

===============================================================================

Section 1.  TO DO / UPDATES

 Q1.1        Contributions needed 
 Q1.2        UPDATES / Changes since last posting 

-----------------------------------------------------------------------------

Question 1.1.  Contributions needed

Date: Fri Dec  6 00:40:00 EST 1996

* Expand the slave/forward section

-----------------------------------------------------------------------------

Question 1.2.  UPDATES / Changes since last posting

Date: Fri Dec  6 00:40:00 EST 1996

* The FAQ is now maintained in BFNN (Bizzare format with No Name).  This
  allows me to create ASCII, HTML, and GNU info (postscript coming soon)
  from one source file.
* References to 4.9.4 changed to 4.9.5.
* memory/CPU usage question - removed uunet map reference.  Not there...
* Minor edits of information and questions for new format.
* How do I delegate authority for sub-domains ? - edited answer

===============================================================================

Section 2.  INTRODUCTION / MISCELLANEOUS

 Q2.1        What is this newsgroup ?
 Q2.2        More information
 Q2.3        What is BIND  ?
 Q2.4        What is the difference between BIND and DNS ?
 Q2.5        Where is the latest version of BIND located ?
 Q2.6        How can I find the path taken between two systems/domains ?
 Q2.7        How do you find the hostname given the TCP-IP address ?
 Q2.8        How do I register a domain ?
 Q2.9        How can I change the IP address of our server ?
 Q2.10       Issues when changing your domain name
 Q2.11       How memory and CPU does DNS use ?
 Q2.12       Other things to consider when planning your servers  
 Q2.13       Proper way to get NS and reverse IP records into DNS
 Q2.14       How do I get my address assigned from the NIC ?
 Q2.15       Is there a block of private IP addresses I can use?
 Q2.16       Does BIND cache negative answers (failed DNS lookups) ?
 Q2.17       What does an NS record really do ?
 Q2.18       DNS ports
 Q2.19       What is the cache file 
 Q2.20       Obtaining the latest cache file
 Q2.21       Selecting a nameserver/root cache
 Q2.22       InterNIC and domain names

-----------------------------------------------------------------------------

Question 2.1.  What is this newsgroup ?

Date: Thu Dec  1 11:08:28 EST 1994

comp.protocols.tcp-ip.domains is the usenet newsgroup for discussion on
issues relating to the Domain Name System (DNS).

This newsgroup is not for issues directly relating to IP routing and
addressing.  Issues of that nature should be directed towards
comp.protocols.tcp-ip.

-----------------------------------------------------------------------------

Question 2.2.  More information

Date: Fri Dec  6 00:41:03 EST 1996

You can find more information concerning DNS in the following places:

* The BOG (BIND Operations Guide) - in the BIND distribution
* The FAQ included with BIND 4.9.5 in doc/misc/FAQ
* DNS and BIND by Albitz and Liu (an O'Reilly & Associates Nutshell
  handbook)
* A number of RFCs (920, 974, 1032, 1034, 1101, 1123, 1178, 1183, 1348,
  1535, 1536, 1537, 1591, 1706, 1712, 1713, 1912, 1918)
* The DNS Resources Directory (DNSRD) http://www.dns.net/dnsrd/
* If you are having troubles relating to sendmail and DNS, you may wish to
  refer to the USEnet newsgroup comp.mail.sendmail and/or the FAQ for that
  newsgroup which may be found for anonymous ftp at rtfm.mit.edu :
  /pub/usenet/news.answers/mail/sendmail-faq
* Information concerning some frequently asked questions relating to the
  Internet (i.e., what is the InterNIC, what is an RFC, what is the IETF,
  etc) may be found for anonymous ftp from ds.internic.net : /fyi/fyi4.txt
  A version may also be obtained with the URL
  gopher://ds.internic.net/00/fyi/fyi4.txt.
* Information on performing an initial installation of BIND may be found
  using the DNS Resources Directory at
  http://www.dns.net/dnsrd/docs/basic.txt
* Three other USEnet newsgroups:

  * comp.protocols.dns.bind
  * comp.protocols.dns.ops
  * comp.protocols.dns.std

-----------------------------------------------------------------------------

Question 2.3.  What is BIND  ?

Date: Tue Sep 10 23:15:58 EDT 1996

From the BOG Introduction -

The Berkeley Internet Name Domain (BIND)  implements an  Internet name
server  for the BSD operating system.  The BIND consists of  a server (or
``daemon'')  and  a resolver  library.   A  name server is a network
service that enables clients to name  resources or  objects and share this
information with other objects in the network.  This in effect is a
distributed  data  base  system  for objects  in a computer network.  BIND
is fully integrated into BSD (4.3 and later releases) network  programs
for use  in  storing and  retrieving host names and address.  The system
administrator can configure the system to  use BIND as  a replacement to
the older host table lookup of information in the network hosts file
/etc/hosts.   The default configuration for BSD uses BIND.

-----------------------------------------------------------------------------

Question 2.4.  What is the difference between BIND and DNS ?

Date: Tue Sep 10 23:15:58 EDT 1996

(text provided by Andras Salamon) DNS is the Domain Name System, a set of
protocols for a distributed database that was originally designed to
replace /etc/hosts files.  DNS is most commonly used by applications to
translate domain names of hosts to IP addresses.  A client of the DNS is
called a resolver; resolvers are typically located in the application
layer of the networking software of each TCP/IP capable machine.  Users
typically do not interact directly with the resolver.  Resolvers query the
DNS by directing queries at name servers that contain parts of the
distributed database that is accessed by using the DNS protocols.  In
common usage, `the DNS' usually refers just to the data in the database.

BIND (Berkeley Internet Name Domain) is an implementation of DNS, both
server and client.  Development of BIND is funded by the Internet Software
Consortium and is coordinated by Paul Vixie.  BIND has been ported to
Windows NT and VMS, but is most often found on Unix.  BIND source code is
freely available and very complex; most of the development on the DNS
protocols is based on this code; and most Unix vendors ship BIND-derived
DNS implementations.  As a result, the BIND name server is the most widely
used name server on the Internet.  In common usage, `BIND' usually refers
to the name server that is part of the BIND distribution, and sometimes to
name servers in general (whether BIND-derived or not).

-----------------------------------------------------------------------------

Question 2.5.  Where is the latest version of BIND located ?

Fri Dec  6 00:23:19 EST 1996

This information may be found at http://www.vix.com/isc/bind.html

At this time, BIND version of 4.9.5 may be found for anonymous ftp from

ftp.vix.com : /pub/bind/release/4.9.5/bind-4.9.5-REL.tar.gz

Other sites that officially mirror the BIND distribution are

* bind.fit.qut.edu.au : /pub/bind
* ftp.funet.fi : /pub/unix/tcpip/dns/bind
* ftp.univ-lyon1.fr : /pub/mirrors/unix/bind
* ftp.oleane.net : /pub/mirrors/unix/bind
* ftp.ucr.ac.cr : /pub/Unix/dns/bind
* ftp.luth.se : /pub/unix/dns/bind/beta

You may need GNU zip, Larry Wall's patch program (if there are any patch
files), and a C compiler to get BIND running from the above mentioned
source.

GNU zip is available for anonymous ftp from

prep.ai.mit.edu : /pub/gnu/gzip-1.2.4.tar

patch is available for anonymous ftp from

prep.ai.mit.edu : /pub/gnu/patch-2.1.tar.gz

A version of BIND for Windows NT is available for anonymous ftp from

ftp.vix.com : /pub/bind/release/4.9.5/contrib/ntdns495relbin.zip

and

ftp.vix.com : /pub/bind/release/4.9.5/contrib/ntbind495rel.zip

-----------------------------------------------------------------------------

Question 2.6.  How can I find the path taken between two systems/domains ?

Date: Fri Dec  6 00:10:31 EST 1996

On a Unix system, use traceroute.  If it is not available to you, you may
obtain the source source for 'traceroute', compile it and install it on
your system.

One version of this program with additional functionality may be found for
anonymous ftp from

ftp.nikhef.nl : /pub/network/traceroute.tar.Z

Another version may be found for anonymous ftp from

ftp.psc.edu : /pub/net_tools/traceroute.tar

-----------------------------------------------------------------------------

Question 2.7.  How do you find the hostname given the TCP-IP address ?

Date: Thu Dec  1 09:55:24 EST 1994

For an address a.b.c.d you can always do:

         % nslookup
         > set q=ptr
         > d.c.b.a.in-addr.arpa.

Most newer version of nslookup (since 4.8.3) will recognize an address, so
you can just say:

         % nslookup a.b.c.d

DiG will work like this also:

         % dig -x a.b.c.d

host from the contrib/host from the bind distribution may also be used.

-----------------------------------------------------------------------------

Question 2.8.  How do I register a domain ?

Date: Wed Sep  4 23:59:42 EDT 1996

You can talk to your Internet Service Provider (ISP).  They can submit the
registration for you.  If you are not going to be directly connected, they
should be able to offer MX records for your domain for mail delivery (so
that mail sent to the new domain will be sent to your "standard" account).
In the case where the registration is done by the organization itself, it
still makes the whole process much easier if the ISP is approached for
secondary servers _before_ the InterNIC is approached for registration.

For information about making the registration yourself, look to the
InterNIC  (or other similar organization).

* anonymout ftp from internic.net : /templates
* gopher://rs.internic.net/
* http://rs.internic.net/reg/reg-forms.html
* http://www.ripe.net/

You will need at least two domain name servers when you register your
domain.  Many ISP's are willing to provide primary and/or secondary name
service for their customers.

Please note that the InterNIC is now charging a fee for domain names    in
the "COM", "ORG", and "NET".  More information may be found from  the
Internic at

http://rs.internic.net/domain-info/fee-policy.html

Many times, registration of a domain name can be initiated by sending
e-mail to the zone contact. You can obtain the contact in the  SOA record
for the country, or in a whois server:

         $ nslookup -type=SOA fr.
         origin = ns1.nic.fr
         mail addr = nic.nic.fr
         ...

The mail address to contact in this case is 'nic@nic.fr' (you must
substitute an '@' for the first dot in the mail addr field).

An alternate method to obtain the e-mail address of the national NIC is
the 'whois' server at InterNIC.

You may be requested to make your request to another email address or
using a certain information template/application.

-----------------------------------------------------------------------------

Question 2.9.  How can I change the IP address of our server ?

Date: Sun May  5 22:46:28 EDT 1996

(From Mark Andrews) Before the move.

* Ensure you are running a modern nameserver. BIND 4.9.3-REL + Patch1 is a
  good choice.
* Inform all your secondaries that you are going to change.  Have them
  install both the current and new addresses in their named.boot's.
* Drop the ttl of the A's associated with the nameserver to something
  small (5 min is usually good).
* Drop the refesh and retry times of the zone containing the  forward
  records for the server.
* Configure the new reverse zone before the move and make sure it is
  operational.
* On the day of the move add the new A record(s) for the server.  Don't
  forget to have these added to parent domains. You will look like you are
  multihomed with one interface dead.

Move the machine after gracefully terminating any other services it is
offering. Then,

* Fixup the A's, ttl, refresh and retry counters.  (If you are running an
  all server EDIT out all references to the old addresses in the cache
  files).
* Inform all the secondaries the move is complete.
* Inform the parents of all zones you are primary of the new NS/A pairs
  for the relevent zones.
* Inform all the administators of zones you are secondaring that the
  machine  has moved.
* For good measure update the serial no for all zones you are primary for.
  This will flush out old A's.

-----------------------------------------------------------------------------

Question 2.10.  Issues when changing your domain name

Date: Sun Nov 27 23:32:41 EST 1994

If you are changing your domain name from abc.foobar.com to foobar.net,
the forward zones are easy and there are a number of ways to do it.   One
way is the following:

Have a single db file for the 2 domains, and have a single machine be the
primary server for both abc.foobar.com and foobar.net.

To resolve the host foo in both domains, use a single zone file which
merely uses this for the host:

foo             IN      A       1.2.3.4

Use a "@" wherever the domain would be used ie for the SOA:

@               IN      SOA     (...

Then use this pair of lines in your named.boot:

primary         abc.foobar.com  db.foobar
primary         foobar.net      db.foobar

The reverse zones should either contain PTRs to both names, or to
whichever name you believe to be canonical currently.

-----------------------------------------------------------------------------

Question 2.11.  How memory and CPU does DNS use ?

Date: Fri Dec  6 01:07:56 EST 1996

It can use quite a bit !  The main thing that BIND needs is memory.   It
uses very little CPU or network bandwidth.   The main  considerations to
keep in mind when planning are:

* How many zones do you have and how large are they ?
* How many clients do you expect to serve and how active are they ?

As an example, here is a snapshot of memory usage from CSIRO Division  of
Mathematics and Statistics, Australia

      Named takes several days to stabalize its memory usage.
 
      Our main server stabalises at ~10Mb. It takes about 3 days to
      reach this size from 6 M at startup. This is under Sun OS 4.1.3U1.

As another example, here is the configuration of ns.uu.net (from late
1994):

      ns.uu.net only does nameservice.  It is running a version of BIND
      4.9.3 on a Sun Classic with 96 MB of RAM, 220 MB of swap (remember
      that Sun OS will reserve swap for each fork, even if it is not needed)
      running Sun OS 4.1.3_U1.

      Joseph Malcolm, of Alternet, states that named generally hovers at 
      5-10% of the CPU, except after a reload, when it eats it all. 

-----------------------------------------------------------------------------

Question 2.12.  Other things to consider when planning your servers

Date: Mon Jan  2 14:24:51 EST 1995

When making the plans to set up your servers, you may want to also
consider the following issues:

        A) Server O/S limitations/capacities (which tend to be widely
           divergent from vendor to vendor)
        B) Client resolver behavior (even more widely divergent)
        C) Expected query response time
        D) Redundancy
        E) Desired speed of change propagation
        F) Network bandwidth availability
        G) Number of zones/subdomain-levels desired
        H) Richness of data stored (redundant MX records? HINFO records?)
        I) Ease of administration desired
        J) Network topology (impacts reverse-zone volume)
 
  Assuming a best-possible case for the factors above, particularly (A), (B),
  (C), (F), (G) & (H), it would be possible to run a 1000-node domain
  using a single lowly 25 or 40 MHz 386 PC with a fairly modest amount of RAM 
  by today's standards, e.g. 4 or 8 Meg.   However, this configuration would 
  be slow, unreliable, and would provide no functionality beyond your basic 
  address-to-name and name-to-address mappings.
 
  Beyond that baseline case, depending on what factors listed above,
  you may want look at other strategies, such splitting up the DNS
  traffic among several machines strategically located, possibly larger ones,
  and/or subdividing your domain itself. There are many options, tradeoffs, 
  and DNS architectural paradigms from which to choose.
-----------------------------------------------------------------------------

Question 2.13.  Proper way to get NS and reverse IP records into DNS

Date: Mon Jan  2 13:03:53 EST 1995

Reverse domain registration is separate from forward domain registration.
Blocks of network addresses have been delegated by the InterNIC.  Check if
your network a.b.c.0 is in such a block by using nslookup:

   nslookup -type=soa c.b.a.in-addr.arpa.
   nslookup -type=soa b.a.in-addr.arpa.
   nslookup -type=soa a.in-addr.arpa.

One of the above should give you the information you are looking for (the
others will return with an error something like `*** No start of authority
(SOA) records available for ...') This will give you the email address of
the person to whom you should address your change request.

If none of these works, your network probably has not been delegated by
the InterNIC and you need to contact them directly.

CIDR has meant that the registration is delegated, but registration of
in-addr.arpa has always been separate from forward zones - and for good
reason - in that the forward and reverse zones may have different
policies, contents etc, may be served by a different set of nameservers,
and exist at different times (usually only at point of creation).  There
isn't a one-to-one mapping between the two, so merging the registration
would probably cause more problems than people forgetting/not-knowing that
they had to register in-addr.arpa zones separately.  For example, there
are organizations that have hundreds of networks and two or more domains,
with a sprinkling of machines from each network in each of the domains.

-----------------------------------------------------------------------------

Question 2.14.  How do I get my address assigned from the NIC ?

Date: Fri Dec  6 01:11:34 EST 1996

You should probably ask your Internet provider to give you an address.
These days, addresses are being distributed through the providers, so that
they can assign adjacent blocks of addresses to sites that go through the
same provider, to permit more efficient routing on the backbones.

Unless you have thousands of hosts, you probably won't be able to get a
class B these days.  Instead, you can get a series of class C networks.
Large requests will be queried, so be ready to provide a network plan if
you ask for more than 16 class C networks.

If you can't do this through your Internet provider, you can look for a
subnet registration form on rs.internic.net.  See the answer in this FAQ
to the question "How do I register a domain" for a URL to these forms.

-----------------------------------------------------------------------------

Question 2.15.  Is there a block of private IP addresses I can use?

Date: Sun May  5 23:02:49 EDT 1996

Yes there is.  Please refer to RFC 1918:

   1918 Address Allocation for Private Internets. Y. Rekhter, B.
        Moskowitz, D. Karrenberg, G. de Groot, & E. Lear. February 1996.
        (Format: TXT=22270 bytes)
 
RFC 1918 documents the allocation of the following addresses for use by
``private internets'':

        10.0.0.0        -   10.255.255.255
        172.16.0.0      -   172.31.255.255
        192.168.0.0     -   192.168.255.255

-----------------------------------------------------------------------------

Question 2.16.  Does BIND cache negative answers (failed DNS lookups) ?

Date: Mon Jan  2 13:55:50 EST 1995

Yes, BIND 4.9.3 and more recent versions will cache negative answers.

-----------------------------------------------------------------------------

Question 2.17.  What does an NS record really do ?

Date: Wed Sep  4 22:52:18 EDT 1996

The NS records in your zone data file pointing to the zone's name  servers
(as opposed to the servers of delegated subdomains) don't do  much.
They're essentially unused, though they are returned in the  authority
section of reply packets from your name servers.

However, the NS records in the zone file of the parent domain are used to
find the right servers to query for the zone in question.  These records
are more important than the records in the zone itself.

-----------------------------------------------------------------------------

Question 2.18.  DNS ports

Date: Fri Feb 10 15:40:10 EST 1995

The following table shows what TCP/UDP ports DNS uses to send and  receive
queries:

   Prot Src   Dst   Use
   udp  53    53    Queries between servers (eg, recursive queries)
                    Replies to above
   tcp  53    53    Queries with long replies between servers, zone 
                    transfers Replies to above
   udp  >1023 53    Client queries (sendmail, nslookup, etc ...)
   udp  53    >1023 Replies to above
   tcp  >1023 53    Client queries with long replies
   tcp  53    >1023 Replies to above

   Note: >1023 is for non-priv ports on Un*x clients. On other client 
         types, the limit may be more or less.

Another point to keep in mind when designing filters for DNS is that a DNS
server uses port 53 both as the source and destination for it's queries.
So, a client queries an initial server from an unreserved port number to
UDP port 53.  If the server needs to query another server to get the
required info, it sends a UDP query to that server with both source and
destination ports set to 53.  The response is then sent with the same
src=53 dest=53 to the first server which then responds to the original
client from port 53 to the original source port number.

The point of all this is that putting in filters to only allow UDP between
a high port and port 53 will not work correctly, you must also allow the
port 53 to port 53 UDP to get through.

Also, ALL versions of BIND use TCP for queries in some cases.  The
original query is tried using UDP.  If the response is longer than the
allocated buffer, the resolver will retry the query using a TCP
connection.  If you block access to TCP port 53 as suggested above, you
may find that some things don't work.

Newer version of BIND allow you to configure a list of IP addresses from
which to allow zone transfers.  This mechanism can be used to prevent
people from outside downloading your entire namespace.

-----------------------------------------------------------------------------

Question 2.19.  What is the cache file

Date: Fri Dec  6 01:15:22 EST 1996

From the "Name Server Operations Guide"

      6.3.  Cache Initialization
 
         6.3.1.  root.cache
 
                 The name server needs to know the servers that
            are  the  authoritative  name  servers for the root
            domain of the network.  To do this we have to prime
            the name server's cache with the addresses of these
            higher authorities.  The location of this  file  is
            specified  in  the  boot  file. ...

-----------------------------------------------------------------------------

Question 2.20.  Obtaining the latest cache file

Date: Fri Dec  6 01:15:22 EST 1996

If you have a version of dig running, you may obtain the information with
the command

      dig @a.root-servers.net. . ns

A perl script to handle some possible problems when using this method
from behind a firewall and that can also be used to periodically obtain
the latest cache file was posted to comp.protocols.tcp-ip.domains  during
early October, 1996.  It was posted with the subject "Keeping  db.cache
current". It is available at
http://www.users.pfmc.net/~cdp/cptd-faq/current_db_cache.txt.

The latest cache file may also be obtained from the InterNIC via ftp  or
gopher:

      ;       This file is made available by InterNIC registration services
      ;       under anonymous FTP as
      ;           file                /domain/named.root
      ;           on server           FTP.RS.INTERNIC.NET
      ;       -OR- under Gopher at    RS.INTERNIC.NET
      ;           under menu          InterNIC Registration Services (NSI)
      ;              submenu          InterNIC Registration Archives
      ;           file                named.root

-----------------------------------------------------------------------------

Question 2.21.  Selecting a nameserver/root cache

Date: Mon Aug  5 22:54:11 EDT 1996

Exactly how is the a root server selected from the root cache? Does the
resolver attempt to pick the closest host or is it random or is it via
sortlist-type workings?  If the root server selected is not available (for
whatever reason), will the the query fail instead of attempting another
root server in the list ?

Every recursive BIND name server (that is, one which is willing to go out
and find something for you if you ask it something it doesn't know) will
remember the measured round trip time to each server it sends queries to.
If it has a choice of several servers for some domain (like "." for
example) it will use the one whose measured RTT is lowest.

Since the measured RTT of all NS RRs starts at zero (0), every one gets
tried one time.  Once all have responded, all RTT's will be nonzero, and
the "fastest server" will get all queries henceforth, until it slows down
for some reason.

To promote dispersion and good recordkeeping, BIND will penalize the RTT
by a little bit each time a server is reused, and it will penalize the RTT
a _lot_ if it ever has to retransmit a query.  For a server to stay "#1",
it has to keep on answering quickly and consistently.

Note that this is something BIND does that the DNS Specification does not
mention at all.  So other servers, those not based on BIND, might behave
very differently.

-----------------------------------------------------------------------------

Question 2.22.  InterNIC and domain names

Date: Sun Jun  2 11:23:49 EDT 1996

The current InterNIC policy on what to do if someone wants to use a domain
name that is already in use may be found at

rs.internic.net : /policy/internic/internic-domain-4.txt

or

http://rs.internic.net/domain-info/internic-domain-4.html.

The following information was submitted by Carl Oppedahl
<oppedahl@patents.com> :

If the jealous party happens to have a trademark registration, it is quite
likely that the domain name owner will lose the domain name, even if they
aren't infringing the trademark.  This presents a substantial risk of loss
of a domain name on only 30 days' notice.  Anyone who is the manager of an
Internet-connected site should be aware of this risk and should plan for
it.

See "How do I protect myself from loss of my domain name?" at
http://www.patents.com/weblaw.sht#domloss.

For an example of an ISP's battle to keep its domain name, see
http://www.patents.com/nsi.sht.

A compendium of information on the subject may be found at
http://www.law.georgetown.edu/lc/internic/domain1.html.

===============================================================================

Section 3.  UTILITIES

 Q3.1        Utilities to administer DNS zone files
 Q3.2        DIG - Domain Internet Groper
 Q3.3        DNS packet analyser
 Q3.4        host
 Q3.5        How can I use DNS information in my program?
 Q3.6        A source of information relating to DNS

-----------------------------------------------------------------------------

Question 3.1.  Utilities to administer DNS zone files

Date: Wed Sep  4 22:53:53 EDT 1996

There are a few utilities available to ease the administration of zone
files in the DNS.

Two common ones are h2n and makezones.  Both are perl scripts.  h2n is
used to convert host tables into zone data files.  It is available for
anonymous ftp from

ftp.uu.net : /published/oreilly/nutshell/dnsbind/dns.tar.Z

makezones works from a single file that looks like a forward zone file,
with some additional syntax for special cases.  It is included in the
current BIND distribution.  The newest version is always available for
anonymous ftp from

ftp.cus.cam.ac.uk : /pub/software/programs/DNS/makezones

More information may be found using the DNS Resources Directory

http://www.dns.net/dnsrd/.

-----------------------------------------------------------------------------

Question 3.2.  DIG - Domain Internet Groper

Date: Thu Dec  1 11:09:11 EST 1994

The latest and greatest, official, accept-no-substitutes version of the
Domain Internet Groper (DiG) is the one that comes with BIND.   Get the
latest kit.

-----------------------------------------------------------------------------

Question 3.3.  DNS packet analyser

Date: Wed Sep  4 23:43:57 EDT 1996

There is a free ethernet analyser called Ethload available for PC's
running DOS. The latest filename is ETHLD104.ZIP. It understands lots  of
protocols including TCP/UDP. It'll look inside there and display
DNS/BOOTP/ICMP packets etc. (Ed. note: something nice for someone to add
to tcpdump ;^) ).  Depending on the ethernet controller it's given  it'll
perform slightly differently. It handles NDIS/Novell/Packet  drivers.  It
works best with Novell's promiscuous mode drivers.   A SimTel mirror site
should have the program available for anonymous ftp.   One is

ftp.coast.net : /SimTel/msdos/lan/ethld104.zip

-----------------------------------------------------------------------------

Question 3.4.  host

Date: Sun Dec  4 21:15:38 EST 1994

A section from the host man page:

     host looks for information about Internet hosts and domain
     names.  It gets this information from a set of intercon-
     nected servers that are spread across the world. The infor-
     mation is stored in the form of "resource records" belonging
     to hierarchically organized "zones".

     By default, the program simply converts between host names
     and Internet addresses. However, with the -t, -a and -v
     options, it can be used to find all of the information about
     domain names that is maintained by the domain nameserver
     system.  The information printed consists of various fields
     of the associated resource records that were retrieved.

     The arguments can be either host names (domain names) or
     numeric Internet addresses.

'host' is compatible with both BIND 4.9 and BIND 4.8

'host' may be found in contrib/host in the BIND distribution.  The latest
version always available for anonymous ftp from

ftp.nikhef.nl : /pub/network/host.tar.Z

It may also be found for anonymous ftp from

ftp.uu.net : /networking/ip/dns/host.tar.Z

-----------------------------------------------------------------------------

Question 3.5.  How can I use DNS information in my program?

Date: Fri Feb 10 15:25:11 EST 1995

It depends on precisely what you want to do:

* Consider whether you need to write a program at all.  It may well be
  easier to write a shell program (e.g. using awk or perl) to parse the
  output of dig, host or nslookup.
* If all you need is names and addresses, there will probably be system
  routines 'gethostbyname' and 'gethostbyaddr' to provide this
  information.
* If you need more details, then there are system routines (res_query and
  res_search) to assist with making and sending DNS queries.  However,
  these do not include a routine to parse the resulting answer (although
  routines to assist in this task are provided).  There is a separate
  library available that will take a DNS response and unpick it into its
  constituent parts, returning a C structure that can be used by the
  program.  The source for this library is available for anonymous ftp at

  hpux.csc.liv.ac.uk : /hpux/Networking/Admin/resparse-1.2

-----------------------------------------------------------------------------

Question 3.6.  A source of information relating to DNS

Date: Tue Nov  5 23:42:21 EST 1996

You may find utilities and tools to help you manage your zone files
(including WWW front-ends) in the "tools" section of the DNS  resources
directory:

http://www.dns.net/dnsrd/tools.html

There are also a number of IP management tools available.  Data
Communications had an article on the subject in Sept/Oct of 1996.  The
tools mentioned in the article and a few others may be found at the
following sites:

* IP Address management, http://www.accugraph.com
* IP-Track, http://www.on.com
* NetID, http://www.isotro.com
* QIP, http://www.quadritek.com
* UName-It, http://www.esm.com

===============================================================================

Section 4.  DEFINITIONS

 Q4.1        TCP/IP Host Naming Conventions
 Q4.2        What are slaves and forwarders ?
 Q4.3        When is a server authoritative?
 Q4.4        My server does not consider itself authoritative !
 Q4.5        NS records don't configure servers as authoritative ?
 Q4.6        underscore in host-/domainnames
 Q4.7        What is lame delegation ?
 Q4.8        How can I see if the server is "lame" ?
 Q4.9        What does opt-class field in a zone file do?
 Q4.10       Top level domains
 Q4.11       Classes of networks
 Q4.12       What is CIDR ?
 Q4.13       What is the rule for glue ?

-----------------------------------------------------------------------------

Question 4.1.  TCP/IP Host Naming Conventions

Date: Mon Aug  5 22:49:46 EDT 1996

One guide that may be used when naming hosts is RFC 1178, "Choosing a Name
for Your Computer", which is available via anonymous FTP from

ftp.internic.net : /rfc/rfc1178.txt

RFCs (Request For Comments) are specifications and guidelines for how many
aspects of TCP/IP and the Internet (should) work.  Most RFCs are fairly
technical documents, and some have semantics that are hotly contested in
the newsgroups.  But a few, like RFC 1178, are actually good to read for
someone who's just starting along a TCP/IP path.

-----------------------------------------------------------------------------

Question 4.2.  What are slaves and forwarders ?

Date: Thu Dec  1 10:32:43 EST 1994

"forwarders" is a list of NS records that are _prepended_ to a list of NS
records to query if the data is not available locally.  This allows a rich
cache of records to be built up at a centralized location.  This is good
for sites that have sporadic or very slow connections to the Internet.
(demand dial-up, for example)  It's also just a good idea for very large
distributed sites to increase the chance that you don't have to go off to
the Internet to get an IP address. (sometimes for addresses across the
street!)

"slave" modifies this to say to replace the list of NS records with the
forwarders entry, instead of prepending to it.  This is for firewalled
environments, where the nameserver can't directly get out to the Internet
at all.

"slave" is meaningless (and invalid, in late-model BINDs) without
"forwarders".  "forwarders" is an entry in named.boot, and therefore
applies only to the nameserver (not to resolvers).

-----------------------------------------------------------------------------

Question 4.3.  When is a server authoritative?

Date: Mon Jan  2 13:15:13 EST 1995

In the case of BIND:

* The server contains current data in files for the zone in question (Data
  must be current for secondaries, as defined in the SOA)
* The server is told that it is authoritative for the zone, by a 'primary'
  or 'secondary' keyword in /etc/named.boot.
* The server does an error-free load of the zone.

-----------------------------------------------------------------------------

Question 4.4.  My server does not consider itself authoritative !

Date: Mon Jan  2 13:15:13 EST 1995

The question was:

  What if I have set up a DNS where there is an SOA record for
  the domain, but the server still does not consider itself
  authoritative.  (when using nslookup and set server=the correct machine.)
  It seems that something is not matching up somewhere.  I suspect
  that this is because the service provider has not given us control
  over the IP numbers in our own domain, and so while the machine listed
  has an A record for an address, there is no corresponding PTR record.
With the answer:

  That's possible too, but is unrelated to the first question.
  You need to be delegated a zone before outside people will start
  talking to your server.  However, a server can still be authoritative
  for a zone even though it hasn't been delegated authority (it's just 
  that only the people who use that as their server will see the data).
    
  A server may consider itself non-authoritative even though it's a
  primary if there is a syntax error in the zone (see the list in the 
  previous question).
-----------------------------------------------------------------------------

Question 4.5.  NS records don't configure servers as authoritative ?

Date: Fri Dec  6 16:13:34 EST 1996

Nope, delegation is a separate issue from authoritativeness.  You can
still be authoritative, but not delegated.  (you can also be  delegated,
but not authoritative -- that's a "lame delegation")

-----------------------------------------------------------------------------

Question 4.6.  underscore in host-/domainnames

Date: Mon Aug  5 22:39:02 EDT 1996

The question is "Are underscores are allowed in host- or domainnames" ?
        RFC 1033 allows them.
        RFC 1035 doesn't.
        RFC 1123 doesn't.
        dnswalk complains about them.


Which RFC is the final authority these days?

Actually RFC 1035 deals with names of machines or names of mail domains.
i.e "_" is not permitted in a hostname or on the RHS of the "@" in
local@domain.

Underscore is permitted where ever the domain is NOT one of these types
of addresses.

In general the DNS mostly contains hostnames and mail domainnames.  This
will change as new resource record types for authenticating DNS  queries
start to appear.

The latest version of 'host' checks for illegal characters in A/MX record
names and the NS/MX target names.

After saying all of that, remember that RFC 1123 is a Required Internet
Standard (per RFC 1720), and RFC 1033 isn't.  Even  RFC 1035 isn't a
required standard.  Therefore, RFC 1123 wins, no contest.

From RFC 1123, Section 2.1

   2.1  Host Names and Numbers

      The syntax of a legal Internet host name was specified in RFC-952
      [DNS:4].  One aspect of host name syntax is hereby changed: the
      restriction on the first character is relaxed to allow either a
      letter or a digit.  Host software MUST support this more liberal
      syntax.

   And described by Dave Barr in RFC1912:

      Allowable characters in a label for a host name are only ASCII
      letters, digits, and the `-' character.  Labels may not be all
      numbers, but may have a leading digit  (e.g., 3com.com).  Labels must
      end and begin only with a letter or digit.  See [RFC 1035] and [RFC
      1123].  (Labels were initially restricted in [RFC 1035] to start with
      a letter, and some older hosts still reportedly have problems with
      the relaxation in [RFC 1123].)  Note there are some Internet
      hostnames which violate this rule (411.org, 1776.com).

Finally, one more piece of information (From Paul Vixie):

   RFC 1034 says only that domain names have characters in them, though it
   says so with enough fancy and indirection that it's hard to tell exactly.

   Generally, for second level domains (i.e., something you would get from
   InterNIC or from the US Domain Registrar and probably other ISO 3166
   country code TLDs), RFC 952 is thought to apply.  RFC 952 was about host
   names rather than domain names, but the rules seemed good enough.

        <domainname> ::= <hname>

        <hname> ::= <name>*["."<name>]
        <name>  ::= <let>[*[<let-or-digit-or-hyphen>]<let-or-digit>]
 
There has been a recent update on this subject which may be found in

ftp.internic.net : /internet-drafts/draft-andrews-dns-hostnames-03.txt.

-----------------------------------------------------------------------------

Question 4.7.  What is lame delegation ?

Date: Mon Aug  5 22:45:02 EDT 1996

Two things are required for a lame delegation:

* A nameserver X is delegated as authoritative for a zone.
* Nameserver X is not performing nameservice for that zone.

Try to think of a lame delegation as a long-term condition, brought about
by a misconfiguration somewhere.  Bryan Beecher's 1992 LISA paper on lame
delegations is good to read on this.  The problem really lies in
misconfigured nameservers, not "lameness" brought about by transient
outages.  The latter is common on the Internet and hard to avoid, while
the former is correctable.

In order to be performing nameservice for a zone, it must have (presumed
correct) data for that zone, and it must be answering authoritatively to
resolver queries for that zone.  (The AA bit is set in the flags section)

The "classic" lame delegation case is when nameserver X is delegated as
authoritative for domain Y, yet when you ask Y about X, it returns
non-authoritative data.

Here's an example that shows what happens most often (using dig, dnswalk,
and doc to find).

Let's say the domain bogus.com gets registered at the NIC and they have
listed 2 primary name servers, both from their *upstream* provider:

 bogus.com      IN      NS      ns.bogus.com
 bogus.com      IN      NS      upstream.com
 bogus.com      IN      NS      upstream1.com

So the root servers have this info.  But when the admins at bogus.com
actually set up their zone files they put something like:

 bogus.com      IN      NS      upstream.com
 bogus.com      IN      NS      upstream1.com

So your name server may have the nameserver info cached (which it may have
gotten from the root).  The root says "go ask ns.bogus.com" since they are
authoritative

This is usually from stuff being registered at the NIC (either nic.ddn.mil
or rs.internic.net), and then updated later, but the folks who make the
updates later never let the folks at the NIC know about it.

-----------------------------------------------------------------------------

Question 4.8.  How can I see if the server is "lame" ?

Date: Mon Aug  5 22:45:02 EDT 1996

Go to the authoritative servers one level up, and ask them who they think
is authoritative, and then go ask each one of those delegees if they think
that they themselves are authoritative.  If any responds "no", then you
know who the lame delegation is, and who is delegating lamely to them.
You can then send off a message to the administrators of the level above.

The 'lamers' script from Byran Beecher really takes care of all this for
you.  It parses the lame delegation notices from BIND's syslog and
summarizes them for you.  It may be found in the contrib section of the
latest BIND distribution.  The latest version is available for anonymous
ftp from

terminator.cc.umich.edu : /dns/lame-delegations/

   If you want to actively check for lame delegations, you can use 'doc'
and 'dnswalk'.   You can check things manually with 'dig'.

The InterNIC recently announced a new lame delegation that will be in
effect on 01 October, 1996.  Here is a summary:

* After receipt/processing of a name registration template, and at random
  intervals thereafter, the InterNIC will perform a DNS query  via UDP
  Port 53 on domain names for an SOA response for the name  being
  registered.
* If the query of the domain name returns a non-authoritative response
  from all the listed name servers, the query will be repeated four times
  over the next 30 days at random intervals approximately 7 days apart,
  with notification to all listed whois and nameserver contacts of the
  possible pending deletion.  If at least one server answers correctly,
  but one or more are lame, FYI notifications will be sent to all contacts
  and checking will be discontinued.  Additionally, e-mail notices will be
  provided to the contact for the name servers holding the delegation to
  alert them to the "lame" condition.  Notifications will state explicitly
  the consequences of not correcting the "lame" condition and will be
  assigned a descriptive subject as follows:

     Subject: Lame Delegation Notice: DOMAIN_NAME

  The notification will include a timestamp for when the query was
  performed.
* If, following 30 days, the name servers still provide no SOA response,
  the name will be placed in a "hold" status and the DNS information will
  no longer be propagated.  The administrative contact will be notified by
  postal mail and all whois contacts will be notified by e-mail, with
  instructions for taking corrective action.
* Following 60 days in a "hold" status, the name will be deleted and made
  available for reregistration.  Notification of the final deletion will
  be sent to the name server and domain name contacts  listed in the NIC
  database.

-----------------------------------------------------------------------------

Question 4.9.  What does opt-class field in a zone file do?

Date: Thu Dec  1 11:10:39 EST 1994

This field is the address class.  From the BOG -

      ...is the address class; currently, only one class
      is supported: IN  for  internet  addresses  and  other
      internet information.  Limited support is included for
      the HS  class,  which  is  for  MIT/Athena  ``Hesiod''
      information.
-----------------------------------------------------------------------------

Question 4.10.  Top level domains

Date: Fri Dec  6 15:13:35 EST 1996

A section from RFC 1591:

   2.  The Top Level Structure of the Domain Names

   In the Domain Name System (DNS) naming of computers there is a
   hierarchy of names.  The root of system is unnamed.  There are a set
   of what are called "top-level domain names" (TLDs).  These are the
   generic TLDs (EDU, COM, NET, ORG, GOV, MIL, and INT), and the two
   letter country codes from ISO-3166.  It is extremely unlikely that
   any other TLDs will be created.

-----

[ Ed note:  the ISO-3166 country codes may be found for anonymous ftp
from:

* ftp.isi.edu : /in-notes/iana/assignments/country-codes
* ftp.ripe.net : /iso3166-codes

]

[ Ed note: Since the Internic started charging for registration services,
(and for other reasons) there are a number of groups that want to offer
an alternative to registering a domain under a "standard" TLD.  More
information on some of these options may be found at:

*      http://www.alternic.net/
*      http://www.eu.org/
*      http://www.ml.org/mljoin.html

You may participate in one of the discussions on iTLD proposals at

* To sign up: http://www.newdom.com/lists
* Old postings: http://www.newdom.com/archive

]

-----

   ...
   Under each TLD may be created a hierarchy of names.  Generally, under
   the generic TLDs the structure is very flat.  That is, many
   organizations are registered directly under the TLD, and any further
   structure is up to the individual organizations.

   In the country TLDs, there is a wide variation in the structure, in
   some countries the structure is very flat, in others there is
   substantial structural organization.  In some country domains the
   second levels are generic categories (such as, AC, CO, GO, and RE),
   in others they are based on political geography, and in still others,
   organization names are listed directly under the country code.  The
   organization for the US country domain is described in RFC 1480.

   Each of the generic TLDs was created for a general category of
   organizations.  The country code domains (for example, FR, NL, KR,
   US) are each organized by an administrator for that country.  These
   administrators may further delegate the management of portions of the
   naming tree.  These administrators are performing a public service on
   behalf of the Internet community.  Descriptions of the generic
   domains and the US country domain follow.

   Of these generic domains, five are international in nature, and two
   are restricted to use by entities in the United States.

   World Wide Generic Domains:

   COM - This domain is intended for commercial entities, that is
         companies.  This domain has grown very large and there is
         concern about the administrative load and system performance if
         the current growth pattern is continued.  Consideration is
         being taken to subdivide the COM domain and only allow future
         commercial registrations in the subdomains.

   EDU - This domain was originally intended for all educational
         institutions.  Many Universities, colleges, schools,
         educational service organizations, and educational consortia
         have registered here.  More recently a decision has been taken
         to limit further registrations to 4 year colleges and
         universities.  Schools and 2-year colleges will be registered
         in the country domains (see US Domain, especially K12 and CC,
         below).

   NET - This domain is intended to hold only the computers of network
         providers, that is the NIC and NOC computers, the
         administrative computers, and the network node computers.  The
         customers of the network provider would have domain names of
         their own (not in the NET TLD).

   ORG - This domain is intended as the miscellaneous TLD for
         organizations that didn't fit anywhere else.  Some non-
         government organizations may fit here.

   INT - This domain is for organizations established by international
         treaties, or international databases.

   United States Only Generic Domains:

   GOV - This domain was originally intended for any kind of government
         office or agency.  More recently a decision was taken to
         register only agencies of the US Federal government in this
         domain.  State and local agencies are registered in the country
         domains (see US Domain, below).

   MIL - This domain is used by the US military.

   Example country code Domain:

   US - As an example of a country domain, the US domain provides for 
	the registration of all kinds of entities in the United States
	on the basis of political geography, that is, a hierarchy of
	<entity-name>.<locality>.<state-code>.US.  For example,
	"IBM.Armonk.NY.US".  In addition, branches of the US domain are
	provided within each state for schools (K12), community
	colleges (CC), technical schools (TEC), state government
	agencies (STATE), councils of governments (COG),libraries
	(LIB), museums (MUS), and several other generic types of
	entities (see RFC 1480 for details).


A section from RFC 1480:

   2. NAMING STRUCTURE

       The US Domain hierarchy is based on political geography.  The
       basic name space under US is the state name space, then the
       "locality" name space, (like a city, or county) then
       organization or computer name and so on.
    
       For example:
    
              BERKELEY.CA.US
              PORTLAND.WA.US
    
       There is of course no problem with running out of names.
    
       The things that are named are individual computers.
    
       If you register now in one city and then move, the database can
       be updated with a new name in your new city, and a pointer can
       be set up from your old name to your new name.  This type of
       pointer is called a CNAME record.
    
       The use of unregistered names is not effective and causes problems
       for other users.  Inventing your own name and using it without
       registering is not a good idea.
    
       In addition to strictly geographically names, some special names
       are used, such as FED, STATE, AGENCY, DISTRICT, K12, LIB, CC,
       CITY, and COUNTY.  Several new name spaces have been created,
       DNI, GEN, and TEC, and a minor change under the "locality" name
       space was made to the existing CITY and COUNTY subdomains by
       abbreviating them to CI and CO.  A detailed description
       follows.
    
       Below US, Parallel to States:
       -----------------------------
    
       "FED" - This branch may be used for agencies of the federal
       government.  For example: <org-name>.<city>.FED.US
    
       "DNI" - DISTRIBUTED NATIONAL INSTITUTES - The "DNI" branch was
       created directly under the top-level US.  This branch is to be used
       for distributed national institutes; organizations that span state,
       regional, and other organizational boundaries; that are national in
       scope, and have distributed facilities.  For example:
       <org-name>.DNI.US.
    
       Name Space Within States:
       ------------------------
    
       "locality" - cities, counties, parishes, and townships.  Subdomains
       under the "locality" would be like CI.<city>.<state>.US,
       CO.<county>.<state>.US, or businesses. For example:
       Petville.Marvista.CA.US.
    
       "CI" - This branch is used for city government agencies and is a
       subdomain under the "locality" name (like Los Angeles). For example:
       Fire-Dept.CI.Los-Angeles.CA.US.
    
       "CO" - This branch is used for county government agencies and is a
       subdomain under the "locality" name (like Los Angeles).  For example:
       Fire-Dept.CO.San-Diego.CA.US.
    
       "K12" - This branch may be used for public school districts.  A
       special name "PVT" can be used in the place of a school district name
       for private schools.  For example: <school-name>.K12.<state>.US and
       <school-name>.PVT.K12.<state>.US.
    
       "CC" - COMMUNITY COLLEGES - This branch was established for all state
       wide community colleges.  For example: <school-name>.CC.<state>.US.
    
       "TEC" - TECHNICAL AND VOCATIONAL SCHOOLS - The branch "TEC" was
       established for technical and vocational schools and colleges. For
       example: <school-name>.TEC.<state>.US.
    
       "LIB" - LIBRARIES (STATE, REGIONAL, CITY, COUNTY) - This branch may
       be used for libraries only.  For example:  <lib-name>.LIB.<state>.US.
    
       "STATE" - This branch may be used for state government agencies.  For
       example:  <org-name>.STATE.<state>.US.
    
       "GEN" - GENERAL INDEPENDENT ENTITY - This branch is for the things
       that don't fit easily into any other structure listed -- things that
       might fit in to something like ORG at the top-level.  It is best not
       to use the same keywords (ORG, EDU, COM, etc.) that are used at the
       top-level to avoid confusion.  GEN would be used for such things as,
       state-wide organizations, clubs, or domain parks.  For example:
       <org-name>.GEN.<state-code>.US.

The application form for the US domain may be found:

* for anonymous ftp from internic.net : /templates/us-domain-template.txt
* http://www.isi.edu/us-domain/

The application form for the EDU, COM, NET, ORG, and  GOV domains may be
found for anonymous ftp from:

internic.net : /templates/domain-template.txt

-----------------------------------------------------------------------------

Question 4.11.  Classes of networks

Date: Wed Sep  4 22:59:27 EDT 1996

The usage of 'classes of networks' (class A, B, C) are historical and have
been replaced by CIDR blocks on the Internet.  That being said...

An Internet Protocol (IP) address is 32 bit in length, divided into  two
or three parts (the network address, the subnet address (if present), and
the host address.  The subnet addresses are only present if the network
has been divided into subnetworks.  The length of the network, subnet, and
host field are all variable.

There are five different network classes.  The leftmost bits indicate  the
class of the network.

       # of     # of
      bits in  bits in
      network   host
Class  field    field   Internet Protocol address in binary  Ranges
============================================================================
  A      7       24      0NNNNNNN.HHHHHHHH.HHHHHHHH.HHHHHHHH    1-127.x.x.x
  B     14       16      10NNNNNN.NNNNNNNN.HHHHHHHH.HHHHHHHH  128-191.x.x.x
  C     22        8      110NNNNN.NNNNNNNN.NNNNNNNN.HHHHHHHH  192-223.x.x.x
  D     NOTE 1           1110xxxx.xxxxxxxx.xxxxxxxx.xxxxxxxx  224-239.x.x.x
  E     NOTE 2           11110xxx.xxxxxxxx.xxxxxxxx.xxxxxxxx  240-247.x.x.x

   where N represents part of the network address and H represents part of 
   the host address.   When the subnet address is defined, the needed bits 
   are assigned from the host address space.

   NOTE 1: Reserved for multicast groups - RFC 1112
   NOTE 2: Reserved for future use

   127.0.0.1 is reserved for local loopback.

-----------------------------------------------------------------------------

Question 4.12.  What is CIDR ?

Date: Tue Nov  5 23:47:29 EST 1996

CIDR is "Classless Inter-Domain Routing (CIDR).  From RFC 1517:

      ...Classless Inter-Domain Routing (CIDR) attempts to deal with
      these problems by defining a mechanism to slow the growth of 
      routing tables and reduce the need to allocate new IP network 
      numbers.  

Much more information may be obtained in RFCs 1467, 1517, 1518, 1520;
with primary reference 1519.

Also please see the CIDR FAQ at

* http://www.ibm.net.il/~hank/cidr.html
* http://www.rain.net/faqs/cidr.faq.html
* http://www.lab.unisource.ch/services/internet/direct/cidr.html

-----------------------------------------------------------------------------

Question 4.13.  What is the rule for glue ?

Date: Fri Apr 28 13:31:24 EDT 1995

A glue record is an A record for a name that appears on the right-hand
side of a NS record.  So, if you have this:

 
        sub.foobar.com.        IN      NS      dns.sub.foobar.com.
        dns.sub.foobar.com.    IN      A       1.2.3.4

then the second record is a glue record (for the NS record above it).

You need glue records when -- and only when -- you are delegating
authority to a nameserver that "lives" in the domain you are delegating
*and* you aren't a secondary server for that domain.

In other words, in the example above, you need to add an A record for
dns.sub.foobar.com since it "lives" in the domain it serves.  This boot
strapping information is necessary:  How are you supposed to find out the
IP address of the nameserver for domain FOO if the nameserver for FOO
"lives" in FOO?

If you have this NS record:

        sub.foobar.com.         IN      NS      dns.xyz123.com.

you do NOT need a glue record, and, in fact, adding one is a very bad
idea.  If you add one, and then the folks at xyz123.com change the
address, then you will be passing out incorrect data.

Also, unless you actually have a machine called something.IN-ADDR.ARPA,
you will never have any glue records present in any of your "reverse"
files.

There is also a sort of implicit glue record that can be useful (or
confusing :^) ).  If the parent server (abc.foobar.com domain in example
above) is a secondary server for the child, then the A record will be
fetched from the child server when the zone transfer is done.  The glue is
still there but it's a little different, it's in the ip address in  the
named.boot line instead of explicitly in the data.  In this case  you can
leave out the explicit glue A record and leave the manually  configured
"glue" in just the one place in the named.boot file.

RFC 1537 says it quite nicely:

      2. Glue records
 
         Quite often, people put unnecessary glue (A) records in their 
         zone files. Even worse is that I've even seen *wrong* glue records 
         for an external host in a primary zone file! Glue records need only 
         be in a zone file if the server host is within the zone and there 
         is no A record for that host elsewhere in the zone file.
 
         Old BIND versions ("native" 4.8.3 and older versions) showed the
         problem that wrong glue records could enter secondary servers in
         a zone transfer.


The remainder of the FAQ is in the next part (Part 2 of 2).