diff --git a/share/examples/isdn/FAQ b/share/examples/isdn/FAQ index 8dd1d71c33a..8550af6064e 100644 --- a/share/examples/isdn/FAQ +++ b/share/examples/isdn/FAQ @@ -3,7 +3,7 @@ ISDN4BSD Frequently Asked Questions =================================== - last edit-date: [Fri Dec 25 19:59:21 1998] + last edit-date: [Sun Feb 14 12:06:23 1999] -------------------------------------------------------------------------------- @@ -22,6 +22,7 @@ Contents: 9. Why it always says "no Space in TX FIFO - State F4 awaiting" ? 10. Incoming alert - what does it mean ? 11. How do i change irq's on my teles 16.3 card ? + 12. NL: i'm getting CAUSE 100 or CAUSE 101 when dialling out @@ -121,6 +122,25 @@ Contents: B. How to figure out the ISP's IP address ----------------------------------------- + + ====================================================================== + + UPDATE NOTE (February 8, 1999): + + Jan Riedinger writes: + --------------------- + >I further think Gary should mention + >in the FAQ in the section "B. How to figure out the ISP's IP address + >that it isn't normaly necessary to do it because of the auto + >address negotiation. + + Gary answers: + ------------- + I think you're right. I wrote that stuff before the support for + negotiation of the IPS's address was added to if_spppsubr.c. + + ====================================================================== + I also intentionally configured the interface with the wrong address for my ISP, like this: @@ -515,3 +535,73 @@ for this card (hint: read "man isic") which is currently unused in your machine and generate a new kernel. +12. NL: i'm getting CAUSE 100 or CAUSE 101 when dialling out +================================================================================ + +This one seems to be specific for the Netherlands. (-hm) + +Question: + +I'm trying to get i4b running on my new FreeBSD 2.2.8 system. The kernel +compiles smootly and everything is looking fine until it's time to dial. +I get the following error: + +Feb 10 20:31:00 goofy isdnd[498]: CHD 00018 I4BPPP outgoing call disconnected (remote) +Feb 10 20:31:00 goofy isdnd[498]: CHD 00018 I4BPPP cause 101: Message not compatible with call state (Q.850) +Feb 10 20:31:00 goofy isdnd[498]: ERR set_channel_idle: controller [0], invalid channel [-1]! +Feb 10 20:31:00 goofy isdnd[498]: ERR msg_disconnect_ind: set_channel_idle failed! + +The remote site is a Cisco 4000 type router. I used debug to take a view at +the ISDN events on the router but according to that the call doesn't arrive +over there. + +Same hardware has worked fine with FreeBSD 2.2.6/i4b 0.63. + +Who knows what's wrong? + + +Answer: + +This sounds very much like your local phone number or remote phone number +is configured wrongly... in the Netherlands you need to specify the number +EXCLUDING the city code... so if you live in Utrecht and your number is +0301234567 you specify 1234567. + +I have seen this in several locations in the Netherlands for years, not +just with i4b, but also with differentt isdn equipment.. why? guess it +simply depends on which operator defines your line or what exchange it +is connected to... :P +What I found is that what solved this with other isdn hardware/software, +also solves it for i4b.. ie.. make sure the local phone number is +specified, and is specified without the city code. +The numbering plan should be 'unknown' + +Anyway, it would be nice if the Dutch ptt (they are called KPN btw) +would tell us why this happens... they havent been able to tell me in the +past so I guess I give up on that, but if everyone finds out whats exactly +happening here I'd be interested to know... :) + +List of number configurations that I have found to almost always work in +the Netherlands: + +1. Local phone number: + usually your prefered msn without city code works here. + (ie, 1234567 if you would like to use 0201234567 for outgoing calls) + on some locations leaving it blank or defining it with the city code, + but without the leading 0 works as well here. + +2. remote phone number: + When this is a 'local' call, don't specify city code. + For calling parties in other cities you of cource have to use the city + code... in general you can say that KPN only accepts the shortest + possible notation where it would still be clear who you want to call. + +3. numbers for incomming call recognition: + KPN always specifies incoming caller ids with city code, but without + leading 0. so 0201234567 will be displayed as 201234567 + + +Hope this helps. +Bart + + (from Bart van Leeuwen bart@ixori.demon.nl) diff --git a/share/examples/isdn/README b/share/examples/isdn/README index 6a84fe84eaa..bdf397f1636 100644 --- a/share/examples/isdn/README +++ b/share/examples/isdn/README @@ -1,8 +1,10 @@ -Note: This is the README from the isdn4bsd 0.70.00 ftp-distribution. Shortly - after release, i4b was integrated into the FreeBSD sourcetree and so - the following parts about FreeBSD may not apply anymore. +Note: This is the README from the isdn4bsd 0.71.00 ftp-distribution. + + In December 1998, i4b was integrated into the FreeBSD sourcetree + and so the following parts about FreeBSD may not apply completely + anymore. For information of how isdn4bsd is integrated into FreeBSD now, please read the file ROADMAP in this directory. @@ -13,7 +15,7 @@ Note: This is the README from the isdn4bsd 0.70.00 ftp-distribution. Shortly ISDN4BSD ======== - beta Version 0.70.00 / December 1998 + beta Version 0.71.00 / March 1999 written by: @@ -29,7 +31,7 @@ Note: This is the README from the isdn4bsd 0.70.00 ftp-distribution. Shortly The isdn4bsd package is: - Copyright (c) 1997, 1998 by Hellmuth Michaelis. All rights reserved. + Copyright (c) 1997, 1999 by Hellmuth Michaelis. All rights reserved. For details see the file LICENSE. @@ -100,7 +102,7 @@ Contents: --------------------- ISDN4BSD (or in short i4b) is a package for interfacing a computer running -FreeBSD, NetBSD or OpenBSD to the ISDN. +FreeBSD, NetBSD, OpenBSD or BSD/OS to the ISDN. The only ISDN protocol currently supported is the BRI protocol specified in I.430, Q.921 and Q.931; better known as DSS1 or Euro-ISDN. @@ -116,19 +118,11 @@ machine. ------------------------------ FreeBSD: - You need FreeBSD 2.2.6 and higher to run i4b out-of-the-box. + I4B was integrated into FreeBSD in January 1999, so it is part + of FreeBSD-current and FreeBSD 3.1 (stable). - This is because PnP support is now available in i4b and - FreeBSD 2.2.6 was the first version which included PnP support - in the base OS. - - In case you want to install i4b on FreeBSD < 2.2.6, you have to - patch your system with the PnP patches from Luigi Rizzo (available - from his home page at http://www.iet.unipi.it/~luigi). - - The install/uninstall script in the FreeBSD directory was tested - with 2.2.7 (it should run with 2.2.n, where n >= 6), 3.0-RELEASE - and 3.0-CURRENT as of Dec 22, 1998. + FreeBSD 2.2.x is no longer supported by i4b, this release might + still run on 2.2 but upcoming i4b releases will not! Please take the time to read the file FreeBSD/INSTALLATION (and the other available documentation) carefully. Thank you! @@ -175,6 +169,11 @@ OpenBSD/i386: it would be great to have someone who likes to work on i4b under OpenBSD regularly and takes over the maintenance for that OS! +BSD/OS + The BSD/OS 4.0 specific support was done by Bert Driehuis. The + support is not yet complete. Please contact Bert directly in case + of questions regarding this at bert_driehuis@nl.compuware.com. + 4. Which ISDN cards are supported ? ----------------------------------- @@ -209,6 +208,7 @@ OpenBSD/i386: Type (passive, PnP) FreeBSD NetBSD/OpenBSD Notes --------------------- ------- -------------- ----------------------- ELSA 1000pro PCI full full + AVM Fritz!Card PCI full unsupported (Note 14) Type (passive, PCMCIA)FreeBSD NetBSD/OpenBSD Notes --------------------- ------- -------------- ----------------------- @@ -228,9 +228,10 @@ OpenBSD/i386: Stollmann Tina-dd unsupported unsupported (Note 8) -Note 1: Only the ISA, non-PnP AVM Fritz!Card is supported; the PnP and PCI - versions are unsupported! The "Teledat 150" sold by the german - Telekom seems to be an AVM Fritz!Card. +Note 1: Only the ISA, non-PnP AVM Fritz!Card (also now known as "Fritz!Card + callsic") is supported; the PnP version is unsupported! + The "Teledat 150" sold by the german Telekom seems to be an AVM + Fritz!Card classic. Note 2: FreeBSD This is a PnP card. To run it under FreeBSD, you need @@ -285,6 +286,10 @@ Note 12: This driver was developed by Ignatios Souvatzis (is@netbsd.org) Note 13: This driver was developed by Martin Husemann under NetBSD and has not been tested under FreeBSD yet. Feedback welcome! +Note 14: This driver was developed by Gary Jennejohn who develops under + FreeBSD only. In case of problems with this driver, please contact + him directly at garyj@muc.de. + 5. Where do i find documentation for ISDN4BSD ? ----------------------------------------------- @@ -306,7 +311,7 @@ Note 13: This driver was developed by Martin Husemann under NetBSD and has - misc/Resources contains URL's and ISBN's to more interesting ISDN related stuff. -- handbook/i4b.ps is the start of a handbook for isdn4bsd. +- handbook/i4b.ps contains a handbook for isdn4bsd. 6. How do i install ISDN4BSD ? diff --git a/share/examples/isdn/Resources b/share/examples/isdn/Resources index 97296d23253..773324e2d58 100644 --- a/share/examples/isdn/Resources +++ b/share/examples/isdn/Resources @@ -5,6 +5,12 @@ Doku: Anwahl von T-Offline mittels i4b und FreeBSD (german) http://www.de.freebsd.org/de/i4b-t-error.html +Doku: PPP mit isdn4bsd (german) +=============================== + + http://www.saargate.de/~domi/freebsd/i4b-ppp-newbie.html + + ISDN Information: ================= @@ -87,4 +93,8 @@ Books: James Carlson, Addison-Wesley 1998, ISBN 0-0201-18539-3 + "ISDN - Die Technik", + Andreas Kanbach, Andreas Koerber, Huethig Verlag 1999, + ISBN 3-7785-2288-4 + -- EOF -----------------------------------------------------------------------