Add mbr: a standard master boot record intended to replace a couple

that are presently embedded in the fdisk and sysinstall code.
This commit is contained in:
Robert Nordier 1999-05-24 22:36:24 +00:00
parent 1522abdd5e
commit 9292eec80d
3 changed files with 177 additions and 0 deletions

View File

@ -0,0 +1,28 @@
# $Id: $
PROG= mbr
NOMAN=
STRIP=
BINDIR?= /boot
BINMODE= 444
M4?= m4
ORG= 0x600
mbr: mbr.o
.if ${OBJFORMAT} == aout
${LD} -N -s -T ${ORG} -o mbr.out mbr.o
dd if=mbr.out of=${.TARGET} ibs=32 skip=1
.else
${LD} -N -e start -Ttext ${ORG} -o mbr.out mbr.o
objcopy -S -O binary mbr.out ${.TARGET}
.endif
mbr.o: mbr.m4 mbr.s
(cd ${.CURDIR}; ${M4} mbr.m4 mbr.s) | \
${AS} ${AFLAGS} -o ${.TARGET}
CLEANFILES+= mbr.out mbr.o
.include <bsd.prog.mk>

51
sys/boot/i386/mbr/mbr.m4 Normal file
View File

@ -0,0 +1,51 @@
#
# Copyright (c) 1999 Robert Nordier
# All rights reserved.
#
# Redistribution and use in source and binary forms are freely
# permitted provided that the above copyright notice and this
# paragraph and the following disclaimer are duplicated in all
# such forms.
#
# This software is provided "AS IS" and without any express or
# implied warranties, including, without limitation, the implied
# warranties of merchantability and fitness for a particular
# purpose.
#
# $Id: $
define(_al,0x0)dnl
define(_cl,0x1)dnl
define(_dl,0x2)dnl
define(_bl,0x3)dnl
define(_ah,0x4)dnl
define(_ch,0x5)dnl
define(_dh,0x6)dnl
define(_bh,0x7)dnl
define(_ax,0x0)dnl
define(_cx,0x1)dnl
define(_dx,0x2)dnl
define(_bx,0x3)dnl
define(_sp,0x4)dnl
define(_bp,0x5)dnl
define(_si,0x6)dnl
define(_di,0x7)dnl
define(_bx_si,0x0)dnl
define(_bx_di,0x1)dnl
define(_bp_si,0x2)dnl
define(_bp_di,0x3)dnl
define(_si_,0x4)dnl
define(_di_,0x5)dnl
define(_bp_,0x6)dnl
define(_bx_,0x7)dnl
define(cmpbr0,`.byte 0x38; .byte ($1 << 0x3) | $2')dnl
define(cmpwi2,`.byte 0x81; .byte 0xb8 | $3; .word $2; .word $1')dnl
define(movb0r,`.byte 0x8a; .byte ($2 << 0x3) | $1')dnl
define(movb1r,`.byte 0x8a; .byte 0x40 | ($3 << 0x3) | $2; .byte $1')dnl
define(movw1r,`.byte 0x8b; .byte 0x40 | ($3 << 0x3) | $2; .byte $1')dnl
define(movwir,`.byte 0xb8 | $2; .word $1')dnl
define(jmpnwi,`.byte 0xe9; .word $1 - . - 0x2')dnl

98
sys/boot/i386/mbr/mbr.s Normal file
View File

@ -0,0 +1,98 @@
#
# Copyright (c) 1999 Robert Nordier
# All rights reserved.
#
# Redistribution and use in source and binary forms are freely
# permitted provided that the above copyright notice and this
# paragraph and the following disclaimer are duplicated in all
# such forms.
#
# This software is provided "AS IS" and without any express or
# implied warranties, including, without limitation, the implied
# warranties of merchantability and fitness for a particular
# purpose.
#
# $Id: $
# Master boot record
.set LOAD,0x7c00 # Load address
.set EXEC,0x600 # Execution address
.set PT_OFF,0x1be # Partition table
.set MAGIC,0xaa55 # Magic: bootable
.set NDRIVE,0x8 # Drives to support
.globl start # Entry point
start: cld # String ops inc
xorl %eax,%eax # Zero
movl %eax,%es # Address
movl %eax,%ds # data
cli # Disable interrupts
movl %eax,%ss # Set up
movwir(LOAD,_sp) # stack
sti # Enable interrupts
movwir(main-EXEC+LOAD,_si) # Source
movwir(main,_di) # Destination
movwir(0x200-(main-start),_cx) # Word count
rep # Relocate
movsb # code
jmpnwi(main-LOAD+EXEC) # To relocated code
main: xorl %esi,%esi # No active found
movwir(partbl,_bx) # Partition table
movb $0x4,%cl # Entries
main.1: cmpbr0(_ch,_bx_) # Null entry?
je main.2 # Yes
jg err_pt # If bit 7 unset
testl %esi,%esi # Active found?
jnz err_pt # Yes
movl %ebx,%esi # Keep place
main.2: addb $0x10,%bl # Till
loop main.1 # done
testl %esi,%esi # Active found?
jnz main.3 # Yes
int $0x18 # BIOS: Diskless boot
main.3: cmpb $0x80,%dl # Drive valid?
jb main.4 # No
cmpb $0x80+NDRIVE,%dl # Within range?
jb main.5 # Yes
main.4: movb0r(_si_,_dl) # Load drive
main.5: movb1r(0x1,_si_,_dh) # Load head
movw1r(0x2,_si_,_cx) # Load cylinder:sector
movwir(LOAD,_bx) # Transfer buffer
movwir(0x201,_ax) # BIOS: Read from
int $0x13 # disk
jc err_rd # If error
cmpwi2(MAGIC,0x1fe,_bx_) # Bootable?
jne err_os # No
jmp *%ebx # Invoke bootstrap
err_pt: movwir(msg_pt,_si) # "Invalid partition
jmp putstr # table"
err_rd: movwir(msg_rd,_si) # "Error loading
jmp putstr # operating system"
err_os: movwir(msg_os,_si) # "Missing operating
jmp putstr # system"
putstr.0: movwir(0x7,_bx) # Page:attribute
movb $0xe,%ah # BIOS: Display
int $0x10 # character
putstr: lodsb # Get character
testb %al,%al # End of string?
jnz putstr.0 # No
putstr.1: jmp putstr.1 # Await reset
msg_pt: .asciz "Invalid partition table"
msg_rd: .asciz "Error loading operating system"
msg_os: .asciz "Missing operating system"
.org PT_OFF
partbl: .fill 0x10,0x4,0x0 # Partition table
.word MAGIC # Magic number