8d89e37c73
I got that wrong,
...
lnc0 @ 0x280
lnc1 @ 0x300
moved le0 into sorted sequence.
1995-04-10 19:13:51 +00:00
1f9e6f1901
lnc0 is @ 0x300
...
lnc1 is @ 0x280
1995-04-10 19:12:29 +00:00
08d5844ce1
This is the new submission of the matcd driver. In addition to the
...
new driver code, there are diffs to several other existing files
on the system and a man page.
This version of matcd implements the rest of the key ioctls related to
playing audio CDs and reading table of contents information from any
type of disc.
This update also corrects several problems detected since the original
version 1(10) was released. These include:
1. Jordons report on the kernel -c string problem.
2. A problem with the driver being confused by other types of
devices located at addresses it probes.
3. An old CD TOC wouldn't always be cleared after a disc change.
4. Cleaned up code so -Wall yields no warnings on 2.0 and later.
5. A problem with drive getting out of sync with the driver when
changing between CD-Data and CD-DA.
There have only been two reports from the field relating to problems
so either the first release isn't really being used or doesn't have
many problems.
If there are any problems with this submission, please let me know.
Submitted by: Frank Durda IV <uhclem%nemesis@fw.ast.com>
1995-04-09 15:50:27 +00:00
63373752ea
Move default address of lnc0 to 0x300. Luigi Rizzo said that his card
...
cannot even go below 0x300...
1995-04-08 21:41:52 +00:00
017e602c0c
pca: change IO_PPI to IO_TIMER1 due to syscons conflict
1995-04-08 16:08:35 +00:00
fe696eb64c
Update pcvt to 3.20 b24
1995-04-08 15:49:25 +00:00
12cfa43650
Added the "eg0" interface driver for the 3Com "3c505" or "etherlink/+"
...
card. This is the braindamaged card with the 80186 CPU on it. It is
slow, probably not very good after all, but hey, if you have one lying
around doing nothing anyway...
Added the "zp0" driver to GENERIC.
1995-04-08 09:36:04 +00:00
e64ae15d3a
Add port IO_PPI for pca per Bruce suggestion
1995-04-06 14:01:20 +00:00
0264a8a9c6
0x330 is the default address for SB Midi, not 0x300
...
Submitted by: Doug Rabson <dfr@render.com>
1995-04-06 03:22:12 +00:00
070e3ec139
Modify behavior of INCLUDES to never look in /usr/include unless we
...
can't find the src/include directory.
Reviewed by: "Rodney W. Grimes" <rgrimes@gndrsh.aac.dev.com>
Submitted by: Mike Pritchard <pritc003@maroon.tc.umn.edu>
1995-04-05 04:10:58 +00:00
146e71662f
Added -I/usrinclude to the tail end of the INCLUDES line. This hack
...
will cause kernel compiles to work even if the src/includes directory
doesn't exist but still do the 'Right Thing' and pull files from the
source tree if it does exist.
Reviewed by: Bruce Evans
1995-04-03 01:13:50 +00:00
7685716d64
Do not try to negotiate synchronous SCSI transfers in the Boot Kernel.
1995-03-30 15:41:33 +00:00
ad0c439a34
Submitted by: Mahesh Neelakanta <mahesh@gcomm.com>
...
Change I/O address of Intel EtherExpress driver (ix0) from 0x280 to
0x300.
1995-03-30 00:20:08 +00:00
e5e6090541
Added NQNFS option and a comment warning about it's overhead.
1995-03-29 05:14:22 +00:00
9829c3ed2e
Change ahc driver comment to note that it's not just the 274x controller
...
it supports.
1995-03-28 08:14:55 +00:00
ce7c8b00ff
CVS:
...
Enable -Wimplicit again.
bash: /src/z1: No such file or directory
1995-03-28 08:02:37 +00:00
18dbbebe5a
Add hooks for upcoming riscom/8 driver
1995-03-27 19:39:58 +00:00
8e4150e95a
Reviewed by:
...
Submitted by:
Obtained from:
Disable previous change. I missed a lot of implicit declarations.
1995-03-25 23:21:36 +00:00
feae7fb7d3
Add -Wimplicit to ${CWARNFLAGS} so that implicitly declared functions
...
don't come back. There are still a few for unsupported network protocols.
1995-03-25 17:50:19 +00:00
d9d537017f
scd driver now lives in non-GPL land.
1995-03-24 18:30:11 +00:00
f8e028be26
Add Intel EtherExpress16 (ix0) driver.
...
Reviewed by:
Submitted by:
Obtained from:
1995-03-18 08:12:48 +00:00
3bf0c362ad
Remove isa/prof_machdep.c. It doesn't exist yet.
1995-03-16 17:18:49 +00:00
de6a307ec7
Document scsi options
1995-03-15 14:27:01 +00:00
d41f24e742
Added support for generic FDDI and the DEC DEFEA and DEFPA FDDI adapters.
...
Submitted by: Matt Thomas
1995-03-14 09:16:07 +00:00
a91ccb55cf
Change device entry examples to reflect the following:
...
Remove PAS-only entry for OPL as ache pointed out.
Update OPL comment to show OPL-2 or OPL-3 support as it is auto-detected.
1995-03-13 18:49:37 +00:00
12fd08535f
Remove old snd file configuration list and add new file list
...
for the snd controller and the different sound devices.
Update LINT to include all sound device drivers using new format.
Reviewed by: wollman
1995-03-12 23:43:15 +00:00
133d0cef4e
Fix config-time syntax errors in sound options.
1995-03-12 12:18:43 +00:00
9cfb8f7ee9
Adding tunnel pseudo-device for Network Installation with User process PPP.
...
Reviewed by: amruai@spec.co.jp
1995-03-12 12:10:35 +00:00
edf16d1564
Added ata.c device driver file.
...
Just so I don't have to repatch files.i386 again & again...
1995-03-07 21:15:30 +00:00
7332d95a98
Restore IPACCT out there..
1995-03-06 10:33:34 +00:00
68cfe626f7
pcvt is still using the XSERVER option; document this.
1995-03-05 22:23:35 +00:00
ca83dc2de1
Upgrade the sound drivers to VoxWare pre-3.0 and fix a number of bugs.
...
Make the sound configuration a little neater
(see /sys/i386/isa/sound/Readme.freebsd)
Add support for the Microsoft Sound Source.
Document the sound options again.
Submitted by: Sujal Patel <smpatel@wam.umd.edu>
Obtained from: Voxware
1995-03-04 21:11:21 +00:00
403ef252fa
Removed obsolete vtrace() remnants.
1995-03-04 03:24:45 +00:00
3c034efc04
Finish the matcd import. My face is red.
1995-03-02 07:34:38 +00:00
05e1d9d455
Changes to incorporate the Matsushita CDROM driver (otherwise known as
...
the "Sound blaster CDROM").
Submitted by: Frank Durda IV <bsdmail@nemesis.lonestar.org>
1995-03-02 04:07:03 +00:00
ebc1a0e2f8
Added a little documentation on the fixed SCSI config and
...
fixed a few quirks that snuck in.
1995-03-01 22:27:45 +00:00
0bf316f5ac
Fix "dependency" spelling error. Implement "clean" entries for device
...
config entries. Add clean rules to aic7xxx and aic7xxx_seq.h.
Submitted by: Pointed out by Bruce Evans <bde@zeta.org.au>
1995-03-01 10:08:07 +00:00
c5489d9047
Use relative include path and -nostdinc avoid getting anything from
...
/usr/include.
1995-02-26 05:05:53 +00:00
226d4c89da
Make diskslice files standard and remove option DISKSLICE. ufs_disksubr.c
...
needed a diskslice function yesterday and all disk drivers will need it.
The diskslice initialization routine should be configurable (but isn't).
1995-02-23 17:19:54 +00:00
9016a6c149
Remove FAT_CURSOR - it's deprecated.
...
Submitted by: "Philippe Charnier" <charnier@lirmm.fr>
1995-02-21 13:42:57 +00:00
f1f0a0bf8b
Remove the SCSI idsn line - it's permanantly dead.
1995-02-19 14:07:28 +00:00
f1f041888e
Remove the ISDN dialer from LINT until it's working.
1995-02-17 09:33:29 +00:00
94a7cbb03e
Restore alphabetical order (except gnu is last).
1995-02-17 08:45:59 +00:00
648c711bb4
This is the latest version of the APM stuff from HOSOKAWA, I have looked
...
briefly over it, and see some serious architectural issues in this stuff.
On the other hand, I doubt that we will have any solution to these issues
before 2.1, so we might as well leave this in.
Most of the stuff is bracketed by #ifdef's so it shouldn't matter too much
in the normal case.
Reviewed by: phk
Submitted by: HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
1995-02-17 02:22:57 +00:00
c851c2f0ea
Include three lines about the pcvt console driver, so we don't ever need
...
a different config file for it.
1995-02-15 20:38:36 +00:00
f2eea8100f
We can enable pcd0 when we actually have one.
1995-02-15 06:18:15 +00:00
a46a6df7e5
Comment out snic0 until it gets updated to the newer scsi code.
1995-02-15 04:49:18 +00:00
6f96f72b16
Add ISDN entries to LINT.
1995-02-15 00:53:15 +00:00
53c1e53822
Add the ISDN entries
1995-02-14 22:34:41 +00:00
4cba45558a
pseudo-device snp 3
...
Example entry for snoop.
1995-02-14 21:15:12 +00:00
Poul-Henning Kamp
Jordan K. Hubbard
Andrey A. Chernov
Joerg Wunsch
Nate Williams
Stefan Eßer
Rodney W. Grimes
David Greenman
Bruce Evans
Peter Dufault
Steven Wallace
Atsushi Murai
Søren Schmidt
Ugen J.S. Antsilevich
Justin T. Gibbs