Submitted by: Mike Mitchell, supervisor@alb.asctmd.com
This is a bulk mport of Mike's IPX/SPX protocol stacks and all the
related gunf that goes with it..
it is not guaranteed to work 100% correctly at this time
but as we had several people trying to work on it
I figured it would be better to get it checked in so
they could all get teh same thing to work on..
Mikes been using it for a year or so
but on 2.0
more changes and stuff will be merged in from other developers now that this is in.
Mike Mitchell, Network Engineer
AMTECH Systems Corporation, Technology and Manufacturing
8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000
supervisor@alb.asctmd.com
"I screwed the initialization of the burstsize. Right now it will default
to 0 (which can cause corruption problems on high latency PCI buses). It
should be set to 8 longwords to avoid problems with certain PCI chipsets."
Submitted by: Matt Thomas <matt@lkg.dec.com>
at the end of each write for writes of more than 1K.
Fixed handling of residual count for early returns in writes to pty masters.
It was only adjusted in 2 out of 6 cases.
Added prototypes.
TTYHOG = 1024 bytes, 10 cblocks were reserved. This was thought to
provide 10 * CBSIZE = 1080 bytes of buffering, but if the head pointer
is at the end of a cblock, then it only provides 1 + 9 * CBSIZE = 973
bytes of buffering. This caused serious data loss for ptys because the
flow control is deterministic and requires at least TTYHOG bytes of
buffering. For ttys, if input flow control is used then there is
usually enough slop in the high watermark to avoid problems, and if
input flow control isn't used then a limit of 973 is not much different
from a limit of 1024.
Add prototypes.
Continue cleaning up new init stuff.
the !COMPAT_43 case - use a common function even when there is no
`old' function. The diffs for this are large because of code motion
to restore the function order to what it was before the pseudo-argument
changes.
Include <sys/sysproto.h> to get correct args structs and prototypes.
The diffs for this are large because the declarations of the args structs
were moved to become comments in the function headers. The comments may
actually match the automatically generated declarations right now.
Add prototypes.
Fix the tests for being a console by reverting to the ones that
were used before the the RB_SERIAL changes. RB_SERIAL only needs
to be tested in one place. The initialization of comconsole was
wrong before the RB_SERIAL changes for the COMCONSOLE case. This
may have been the cause of the unnecessary changes.
Start eliminating #includes of <i386/i386/cons.h>. This header is
supposed to be included from <machine> although it should be
completely machine-independent and included from <sys>.
Remove a wrong XXX comment. `comconsole' is used to test for being
a console and even the tests for deciding the default termios state
are necessary (the semi-reentrant i/o routines don't handle ordinary
device i/o).
cy.c:
Sync with sio.c. The console tests are present but always fail.
filesystem layer, as was done in lite-2. Merged in some other cosmetic
changes while I was at it. Rewrote most of msdosfs_access() to be more
like ufs_access() and to include the FS read-only check.
Obtained from: partially from 4.4BSD-lite2
prototypes for all syscalls. The args structs are still declared in
comments as in VOP implementation functions. I don't like the
duplication for this, but several more layers of changes are required
to get it right. First we need to catch up with 4.4lite2, which uses
macros to handle struct padding. Then we need to catch up with NetBSD,
which passes the args correctly (as void *). Then we need to handle
varargs functions and struct padding better. I think all the details
can be hidden in machine-generated functions so that the args structs
and verbose macros to reference them don't have to appear in the core
sources.
Add prototypes.
Add bogus casts to hide the evil type puns exposed by the previous
steps. &uap[1] was used to get at the args after the first. This
worked because only the first arg in *uap was declared. This broke
when the machine- genenerated args struct declared all the args
(actually it declares extra args in some cases and depends on the
user stack having some accessible junk after the last arg, not to
mention the user args being on the stack. It isn't possible to
declare a correct args struct for a varargs syscall). The msgsys(),
semsys() and shmsys() syscall interfaces are BAD because they
multiplex several syscalls that have different types of args.
There was no reason to duplicate this sysv braindamage but now
we're stuck with it. NetBSD has reimplemented the syscalls properly
as separate syscalls #220-231.
Declare static functions as static in both their prototype and their
implementation (the latter is optional, and this misfeature was used).
Remove gratuitous #includes.
Continue cleaning up new init stuff.
handler (remove SA_NODEFER).
On the other hand, signal() case should set sa_flags to SA_NODEFER as
in previous change.
In addition, added #ifdef'd code for signal() to or in SA_RESETHAND
flag for when that compatability is implemented.
valid bytes, we must also clear the B_DONE flag. Some filesystems
depend on this (incl NFS) and is probably the cause of the biodone
error and subsequent crash. Anyway this change needs to be made.
Add SA_NODEFER define to signal.h
Add ps_nodefer field to struct sigacts in signalvar.h.
Add code to kern_sig.c to handle SA_NODEFER.
If flag is set, when the signal is delivered, it is not masked automatically
from receiving the same signal again.
Reviewed by: wollman, bde
accesses after the BIOS bus scan. The previous revision made the assumption,
that every PCI motherboard did ...
Change the test on the initial value of the CONF1_ADDR_PORT register in a way
that makes the probe succeed on triton based motherboards, without breaking
the EISA motherboard that has some non-PCI register at the same address.
ifp->if_output() functions. This way, initial implementations of
rt_output functionality can just lazily use if_output until customized
versions are written.
(mask,value) in the tree, don't immediately return EEXIST. Instead, check
to see if the pre-existing route was generated by protcol-cloning. If so,
then it is OK to simply blow away the old route and re-attempt the insertion.
If not, then fall back to the same error code as before.
a few new wrinkles for MTU discovery which tcp_output() had better
be prepared to handle. ip_output() is also modified to do something
helpful in this case, since it has already calculated the information
we need.
This is truly a hack. The idea is taken from the Linux ibcs2 emulator.
To use this feature, you must use the option,
options SPX_HACK
in your config.
Also, in /compat/ibcs2/dev, you must do:
lrwxr-xr-x 1 root wheel 9 Oct 15 22:20 X0R@ -> /dev/null
lrwxr-xr-x 1 root wheel 7 Oct 15 22:20 nfsd@ -> socksys
lrwxr-xr-x 1 root wheel 9 Oct 15 22:20 socksys@ -> /dev/null
crw-rw-rw- 1 root wheel 41, 1 Oct 15 22:14 spx
Do NOT use old socksys driver as that has been removed.
This hack needs /compat/ibcs2/dev/spx to be any device that does NOT
exist/configured (so the now non-existant spx major/minor works fine).
When an open() is called, the error ENXIO is checked and then the
path is checked. If spx open detected, then a unix socket is opened
to the hardcoded path "/tmp/.X11-unix/X0".
As the Linux hacker author mentioned, the real way would be to detect
the getmsg/putmsg through /dev/X0R and /dev/spx. Until this true
solution is implemented (if ever), I think this hack is important
enough to be put into the tree, even though I don't like it dirtying
up my clean code (which is what #ifdef SPX_HACK is for).
Currently, the emulator defaults to returning "FreeBSD" as the system
name, release "3.2", and version "2.0". Some programs want to make
sure they are on a SYSV 3.2 system and check for 3.X release number.
Use the following defines to override the defaults:
IBCS2_UNAME_SYSNAME
IBCS2_UNAME_RELEASE
IBCS2_UNAME_VERSION
(should be string)
for system name, release, and version, respectively. This allows
someone to compile the emulator into the kernel so it can pretend
to be a specific system if needed.
Require the state of the configuration enable bits to be OFF assuming
that the BIOS left them that way, as it should anyway to avoid bad things
to happen.
The tests themselves are copied from the previous release, with the
exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be
read back as '0', since only DWORD addresses are legal.
Julian Elischer
David Greenman
Bruce Evans
Jordan K. Hubbard
Steven Wallace
Andrey A. Chernov
Poul-Henning Kamp
John Dyson
Ugen J.S. Antsilevich
Peter Wemm
Stefan Eßer
Garrett Wollman