85827d9c13
Restructured the floppy tape probe.
...
The ``flags 1'' in the fdc line is now only needed for owners of an
Insight tape (perhaps there aren't any? Mine is disfunctional). All
other probes are safe wrt. to the motor-control line of floppy disk
drives. Document the flag in LINT finally.
1995-05-06 19:34:28 +00:00
f73bbaf2fa
Fix spelling error. Commented out ISO and ISO related things until I
...
either fix it or we decide to remove it. It requires implementing PCB
hashing to get it to compile and likely a lot more to get it to work..
1995-05-05 07:47:44 +00:00
657e73c4f5
Add National Instruments "LabPC" driver
1995-04-28 00:51:40 +00:00
d52d7365c6
Document MFS_ROOT option.
1995-04-25 03:44:04 +00:00
d3f4d460f8
Added "bio" to matcd.
1995-04-24 05:33:59 +00:00
e3dd31586c
Removed the NSECS_MULTI option, and implemented both 32 bit probe
...
enable and multi-sector I/O enable by using the controller or device
flags capability. Per a suggestion by phk.
1995-04-24 04:30:19 +00:00
1a7c583c01
Substantially clean up LINT and add `fe'.
1995-04-23 18:30:27 +00:00
5b920a895d
Document the wd.c option NSECS_MULTI.
1995-04-22 22:39:33 +00:00
b6b8f81ead
Add quotes around TUNE_1542
1995-04-18 11:02:22 +00:00
8909a72b5d
Add "sctarg" and document new SCSI_REPORT_GEOMETRY option for ache
1995-04-14 15:12:24 +00:00
e5f2c8f67e
Add "BREAK_TO_DEBUGGER" option.
1995-04-12 22:02:51 +00:00
63373752ea
Move default address of lnc0 to 0x300. Luigi Rizzo said that his card
...
cannot even go below 0x300...
1995-04-08 21:41:52 +00:00
017e602c0c
pca: change IO_PPI to IO_TIMER1 due to syscons conflict
1995-04-08 16:08:35 +00:00
fe696eb64c
Update pcvt to 3.20 b24
1995-04-08 15:49:25 +00:00
12cfa43650
Added the "eg0" interface driver for the 3Com "3c505" or "etherlink/+"
...
card. This is the braindamaged card with the 80186 CPU on it. It is
slow, probably not very good after all, but hey, if you have one lying
around doing nothing anyway...
Added the "zp0" driver to GENERIC.
1995-04-08 09:36:04 +00:00
e64ae15d3a
Add port IO_PPI for pca per Bruce suggestion
1995-04-06 14:01:20 +00:00
0264a8a9c6
0x330 is the default address for SB Midi, not 0x300
...
Submitted by: Doug Rabson <dfr@render.com>
1995-04-06 03:22:12 +00:00
ad0c439a34
Submitted by: Mahesh Neelakanta <mahesh@gcomm.com>
...
Change I/O address of Intel EtherExpress driver (ix0) from 0x280 to
0x300.
1995-03-30 00:20:08 +00:00
e5e6090541
Added NQNFS option and a comment warning about it's overhead.
1995-03-29 05:14:22 +00:00
9829c3ed2e
Change ahc driver comment to note that it's not just the 274x controller
...
it supports.
1995-03-28 08:14:55 +00:00
f8e028be26
Add Intel EtherExpress16 (ix0) driver.
...
Reviewed by:
Submitted by:
Obtained from:
1995-03-18 08:12:48 +00:00
de6a307ec7
Document scsi options
1995-03-15 14:27:01 +00:00
d41f24e742
Added support for generic FDDI and the DEC DEFEA and DEFPA FDDI adapters.
...
Submitted by: Matt Thomas
1995-03-14 09:16:07 +00:00
a91ccb55cf
Change device entry examples to reflect the following:
...
Remove PAS-only entry for OPL as ache pointed out.
Update OPL comment to show OPL-2 or OPL-3 support as it is auto-detected.
1995-03-13 18:49:37 +00:00
12fd08535f
Remove old snd file configuration list and add new file list
...
for the snd controller and the different sound devices.
Update LINT to include all sound device drivers using new format.
Reviewed by: wollman
1995-03-12 23:43:15 +00:00
133d0cef4e
Fix config-time syntax errors in sound options.
1995-03-12 12:18:43 +00:00
7332d95a98
Restore IPACCT out there..
1995-03-06 10:33:34 +00:00
68cfe626f7
pcvt is still using the XSERVER option; document this.
1995-03-05 22:23:35 +00:00
ca83dc2de1
Upgrade the sound drivers to VoxWare pre-3.0 and fix a number of bugs.
...
Make the sound configuration a little neater
(see /sys/i386/isa/sound/Readme.freebsd)
Add support for the Microsoft Sound Source.
Document the sound options again.
Submitted by: Sujal Patel <smpatel@wam.umd.edu>
Obtained from: Voxware
1995-03-04 21:11:21 +00:00
05e1d9d455
Changes to incorporate the Matsushita CDROM driver (otherwise known as
...
the "Sound blaster CDROM").
Submitted by: Frank Durda IV <bsdmail@nemesis.lonestar.org>
1995-03-02 04:07:03 +00:00
ebc1a0e2f8
Added a little documentation on the fixed SCSI config and
...
fixed a few quirks that snuck in.
1995-03-01 22:27:45 +00:00
226d4c89da
Make diskslice files standard and remove option DISKSLICE. ufs_disksubr.c
...
needed a diskslice function yesterday and all disk drivers will need it.
The diskslice initialization routine should be configurable (but isn't).
1995-02-23 17:19:54 +00:00
f1f0a0bf8b
Remove the SCSI idsn line - it's permanantly dead.
1995-02-19 14:07:28 +00:00
f1f041888e
Remove the ISDN dialer from LINT until it's working.
1995-02-17 09:33:29 +00:00
648c711bb4
This is the latest version of the APM stuff from HOSOKAWA, I have looked
...
briefly over it, and see some serious architectural issues in this stuff.
On the other hand, I doubt that we will have any solution to these issues
before 2.1, so we might as well leave this in.
Most of the stuff is bracketed by #ifdef's so it shouldn't matter too much
in the normal case.
Reviewed by: phk
Submitted by: HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
1995-02-17 02:22:57 +00:00
f2eea8100f
We can enable pcd0 when we actually have one.
1995-02-15 06:18:15 +00:00
a46a6df7e5
Comment out snic0 until it gets updated to the newer scsi code.
1995-02-15 04:49:18 +00:00
6f96f72b16
Add ISDN entries to LINT.
1995-02-15 00:53:15 +00:00
4cba45558a
pseudo-device snp 3
...
Example entry for snoop.
1995-02-14 21:15:12 +00:00
9da6a15aa4
Pick a more sensible default for # of ptys, add comment that this can
...
go as high as 64 now.
1995-02-12 09:29:59 +00:00
b60d4a5d98
Delete a redundant line - "options TUN" and Add explanation for
...
"pseudo-device tun" as same as other device.
1995-02-10 05:42:24 +00:00
cfc9f6212d
Add the Cyclades serial driver code (ALPHA) from Andrew Werple and
...
adapted to FreeBSD by Heikki Suonsivu <hsu@cs.hut.fi>.
Submitted by: Andrew Werple <andrew@werple.apana.org.au> and
Heikki Suonsivu <hsu@cs.hut.fi>
Obtained from: NetBSD
1995-02-09 09:47:31 +00:00
2cd01159da
The very minimum driver required to support a Video Spigot. See the
...
copyright notices in the code for information on where to go to pick
up additional useful bits.
Submitted by: Jim Lowe <james@blatz.cs.uwm.edu>
1995-02-06 23:19:49 +00:00
4530be5246
Bring PCVT's config files into the tree.
...
Submitted by: mh
1995-02-05 10:56:47 +00:00
2d3f9865da
Add Tunnel device for ppp (iijppp)
1995-01-31 06:33:58 +00:00
988862353e
Describe default MAXCONS value: 12
1995-01-30 14:40:06 +00:00
e05407d84b
New and far better NCR5380/NCR53400 scsi-driver.
...
Handles at least Trantor T130 and ProAudioSpectrum adapters.
The pas driver has consequently been removed.
This driver can be configured without without interrupts.
Manpage to follow when PAS16 has been edited in.
Reviewed by: phk
Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-01-27 07:49:19 +00:00
89d8fc79de
MAXCONS option described
1995-01-26 11:00:12 +00:00
87fcda4634
Remove FAT_CURSOR, it is already non-existent during several
...
last syscons versions
1995-01-26 05:04:37 +00:00
b5d89ca8ad
Load the kernel symbol table in the boot loader and not at compile time.
...
(Boot with the -D flag if you want symbols.)
Make it easier to extend `struct bootinfo' without losing either forwards
or backwards compatibility.
ddb_aout.c:
Get the symbol table from wherever the loader put it.
Nuke db_symtab[SYMTAB_SPACE].
boot.c:
Enable loading of symbols. Align them on a page boundary. Add printfs
about the symbol table sizes.
Pass the memory sizes to the kernel.
Fix initialization of `unit' (it got moved out of the loop).
Fix adding the bss size (it got moved inside an ifdef).
Initialize serial port when RB_SERIAL is toggled on.
Fix comments.
Clean up formatting of recently added code.
io.c:
Clean up formatting of recently added code.
netboot/main.c, machdep.c, wd.c:
Change names of bootinfo fields.
LINT:
Nuke SYMTAB_SPACE.
Fix comment about DODUMP.
Makefile.i386:
Nuke use of dbsym.
Exclude gcc symbols from kernel unless compiling with -g.
Remove unused macro.
Fix comments and formatting.
genassym.c:
Generate defines for some new bootinfo fields. Change names of old ones.
locore.s:
Copy only the valid part of the `struct bootinfo' passed by the loader.
Reserve space for symbol table, if any.
machdep.c:
Check the memory sizes passed by the loader, if any. Don't use them yet.
bootinfo.h:
Add a size field so that we can resolve some mismatches between the loader
bootinfo and the kernel boot info. The version number is not so good for
this because of historical botches and because it's harder to maintain.
Add memory size and symbol table fields. Change the names of everything.
Hacks to save a few bytes:
asm.S, boot.c, boot2.S:
Replace `ouraddr' by `(BOOTSEG << 4)'.
boot.c:
Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT"
code that skips the BIOS variables. Eliminate `total'. Combine some
more printfs.
boot.h, disk.c, io.c, table.c:
Move all statically initialzed data to table.c.
io.c:
Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
673f8dc3be
Add: device joy0 at isa? port "IO_GAME" (joystick)
1995-01-25 20:35:14 +00:00
94187a78bf
is to lnc changes
1995-01-24 20:38:39 +00:00
3691d2b97c
Add support for Olof Johansson's WD7000 driver.
...
Submitted by: Olof Johansson <offe@ludd.luth.se>
Obtained from:
1995-01-23 00:25:03 +00:00
0dd1eea105
Put UCONSOLE back - I was wrong, it's still used in one last place.
...
Submitted by: ollivier
1995-01-14 02:39:22 +00:00
09c42f85eb
1. Remove UCONSOLE. This appears to be well and truly dead (unless it's
...
hiding someplace in /sys I can't find).
2. Remove NCONS. Soren's latest changes make it a no-op.
1995-01-12 15:37:16 +00:00
2f6df2645b
Gunther Schadow <gusw@fub46.zedat.fu-berlin.de>'s
...
driver for the Genius GS-4500 hand scanner.
Submitted by: gusw@fub46.zedat.fu-berlin.de
1995-01-07 14:52:08 +00:00
2d85986466
Add examples for the sony and the panasonic drivers.
1994-12-26 17:33:52 +00:00
59d8d13f60
Added `ds', a black-hole network interface.
1994-12-22 21:00:05 +00:00
fc0a941a94
Bump LINT's symtab space.
1994-12-17 08:37:22 +00:00
cdf25f3740
Add Fred Cawthorne's GPIB driver.
...
Submitted by: fcawth@delphi.umd.edu
1994-12-17 08:07:03 +00:00
8c664261f7
Uncomment DISKSLICE; it should work now (for drivers that support it).
1994-12-16 16:58:08 +00:00
784cf072d8
Remove sd1-sd3 & st1, now that we can autoallocate them.
...
fix the vn driver in LINT. It autoallocates too.
Reviewed by: phk
Submitted by: rgrimes
1994-12-16 06:04:16 +00:00
0d2d94f67b
Add ahc driver, more symtab space.
1994-12-13 22:01:35 +00:00
3aa0699930
Delete `HZ' option; it's only of use to Bruce and screws up the NTP PLL
...
(among other things). Correctly specify `vn' as a pseudo. Make sure
things are in the right places.
1994-12-13 20:56:30 +00:00
9ba0e7c355
Add old options HZ, VN, ALLOW_CONFLICT_DRQ, ALLOW_CONFLICT_MEMADDR,
...
AUTO_EOI_1, AUTO_EOI_2, COMCONSOLE, COM_MULTIPORT.
Add new option DISKSLICE.
Change comments about DUMMY_NOPS.
1994-12-11 23:52:18 +00:00
3339606d9a
Document the options DUMMY_NOPS and TUNE_1542.
1994-12-11 00:09:34 +00:00
663afbc34f
Make CHILD_MAX and OPEN_MAX a tunable parameter.
1994-12-03 17:36:37 +00:00
83401efa16
Add Cronyx/Sigma files and config information; delete outdated config files.
1994-12-03 00:17:55 +00:00
0e01a1ca15
Expand again the SYMTAB_SPACE for LINT.
1994-11-27 14:59:54 +00:00
9ec2a4b3e3
Added #define PROBE_VERBOSE and description (PCI chip set boot messages)
...
Reviewed by:
Submitted by:
Obtained from:
1994-11-24 20:35:21 +00:00
5783a8ffe5
The SYMTAB_SPACE bloatometer was 40% out of date.
1994-11-15 14:28:46 +00:00
ada9d061d4
Add back ze0 driver; somebody took it out of _both_ LINT and GENERIC,
...
kinda hosing the laptop folks.
1994-11-08 07:39:28 +00:00
98020fdd6c
Added a kernel variable, "dodump" defaulting to zero, which disables dumps.
...
Somebody should make a mib variable for it.
Just now it is pointless to dump the kernel, since we have nothing which
can read the dump.
Furthermore is should never be the default to dump.
options DODUMP
will enable dumps.
1994-11-07 03:51:32 +00:00
b851eb1523
Eliminate USERCONFIG. This option is now standard.
1994-11-03 15:51:38 +00:00
d29895dc1a
Fix Jordan's misplaced IPFIREWALL option. Fix style of other previous commits.
...
Document ARP_PROXYALL.
1994-11-02 01:11:03 +00:00
95b926abab
Documented the FDSEEKWAIT option.
1994-10-30 20:57:07 +00:00
100ba1a617
IP Firewall code from Daniel Boulet and J.S.Antsilevich
...
Submitted by: danny ugen
1994-10-28 15:09:49 +00:00
d1a27c8dab
Stylistic changes.
1994-10-26 21:10:13 +00:00
cb72513713
Enable USERCONFIG and document it in LINT.
1994-10-26 19:20:27 +00:00
3c43212ad8
Added sea0 - Seagate driver lines to config
1994-10-24 22:18:12 +00:00
6a8d662377
LINT: vastly restructured so that it's actually useful for something
...
Makefile.i386: make definition of STRIP unconditional.
1994-10-21 01:10:54 +00:00
c47b6376fd
According to a quick reading of sources, one experiment and Bruce's word:
...
aha, ahb and bt all on "irq ?" now.
1994-10-20 00:53:30 +00:00
12396a6a16
Bruce told me to: Make uha0 use irq ?
1994-10-20 00:19:37 +00:00
4da5299d11
Sanitized a little bit. All SCSI is now "controllers" and LINT is more
...
sorted now.
1994-10-15 08:09:42 +00:00
70c0b54c8a
USE_RTC_CENTURY added
1994-10-04 14:11:02 +00:00
8819d6eca4
I added "pserudo-device gzip" as default.
1994-10-03 22:32:13 +00:00
fae772f7b2
Added Cortex-I Frame Grabber by Paul S. LaFollette, Jr.
...
Submitted by: Paul S. LaFollette, Jr.
1994-10-01 17:59:42 +00:00
93e9832a32
#Driver for Advaced Power Management (also need options APM)
...
-device apm0 isa?
+device apm0 at isa?
1994-10-01 16:44:07 +00:00
3af6b6527a
Added options APM and device apm0 for Advanced Power Management support.
1994-10-01 05:43:09 +00:00
af27b9fc77
GENERIC*: remove commented-out options; the user should have to do
...
/some/ research to figure out how to turn them on.
LINT: better description of TCP_COMPAT_42: ``emulate 4.2BSD TCP bugs''.
1994-09-28 22:57:24 +00:00
33e7ce7c3d
LKMs are no longer options, so remove the `options LKM' from LINT.
1994-09-28 22:51:54 +00:00
5c370a2e33
Added entries for PCI and NCR device drivers.
1994-09-28 17:00:14 +00:00
0dc7d9074f
Added
...
options DIAGNOSTIC
options MSDOSFS_DEBUG
1994-09-27 20:36:26 +00:00
31208007c7
Jim Babb's port of the AIC6360 code.
...
Submitted by: babb
Obtained from: NetBSD
1994-09-26 16:15:06 +00:00
7bf314246a
HARDFONTS option documented
1994-09-25 02:10:47 +00:00
16b49b3e73
Removed last vestige of MULTICAST option.
1994-09-23 06:22:58 +00:00
c9b1d6048d
More loadable VFS changes:
...
- Make a number of filesystems work again when they are statically compiled
(blush)
- FIFOs are no longer optional; ``options FIFO'' removed from distributed
config files.
1994-09-22 19:38:41 +00:00
3f9a698275
Added MSDOSFS option.
1994-09-19 15:45:02 +00:00
12cada7161
Add SYSV shm stuff back to LINT.
...
chflags noschg /kernel in Makefile.i386 so if our previous kernel
was installed by make install, the second won't fall over.
1994-09-16 10:23:46 +00:00
66ce0eae53
Added DSI_SOFT_MODEM
1994-09-13 03:34:08 +00:00
2c2006d83f
Deleted the pccons driver from the files.i386, added the seagate driver
...
into files.i386.
LINT:
Deleted the timezone line. Commented out the maxfdescs line and the
SYSVSHM and the SHMMAXPGS lines.
1994-09-11 21:09:52 +00:00
e32458368f
Remove *_SAVER syscons options - I don't know how they go in here:
...
(These options did not even really exist in 1.1.5.1)
CVS:
1994-09-09 22:12:38 +00:00
2ac8be827f
Reviewed by:
...
Delete the hints to the sg driver. This thing was never finished and
has now been beaten by the sea driver.
1994-09-05 22:32:42 +00:00
9aba88bf29
Rather than exclude bounce buffers support with NOBOUNCE, include it
...
with BOUNCE_BUFFERS. This is more intuitive, and is better for future
multiplatform support. Added BOUNCE_BUFFERS option to the GENERIC and
LINT kernel config files.
1994-08-31 06:17:49 +00:00
f1a9c71596
Made a little more up to date.
1994-08-28 06:46:25 +00:00
d5e4441ddd
Updated this a bit. It's still woefully out of date.
1994-08-27 16:23:03 +00:00
e9d1679134
Added my ProAudioSpectum SCSI driver for cards with the 5380 SCSI-chip.
...
This is the slowest and most stupid of our SCSI-drivers, but it is there
and it works. It has been tested with CD-ROM and disk.
It uses no interrupts, no DMA, just polled I/0.
Transfer-rate is <= 100Kbyte/sec.
If you set the jumpers on the board, you can change the unit-number and
you will be able to have four of these co-exist in one computer, why one
would do that is somewhat unclear though.
If I ever get my hand on the docs for this, I will improve it of course,
but for now we can install and access those CD-ROMs.
1994-08-19 00:01:08 +00:00
0bf1d79182
Remove the now bogus IP_VAT_COMPAT.
1994-05-18 16:23:25 +00:00
33b061c9fd
Add line for IP_VAT_COMPAT, documenting it.
1994-05-17 23:20:32 +00:00
e3178a06e5
Fold in the changes to support IP multicasting, from Jim Lowe et al.
1994-05-17 22:30:41 +00:00
3759860cff
Whoops - comment out psm0 by default in case someone wants to
...
compile this thing. I won't turn on the ALLOW_CONFLICT_IOADDR this would need
to compile instead since that would then rob us of other, possibly important,
conflict checks.
1994-05-17 14:18:13 +00:00
45b4c36f90
Add descriptions of ALLOW_CONFLICT_* options we want to doc for now
...
(only 2). Add entry for psm0 (PS/2 mouse).
1994-05-17 14:15:11 +00:00
7d46c3b6d8
Remove confusing (as they are now unnecessary) comments about
...
INACCURATE_MICROTIME_IS_OK. Document what pca0 is.
1994-05-13 08:48:22 +00:00
cfecaf32f0
Added GPL_MATH_EMULATE to options
...
This should not be used in binary distributions.
1994-04-29 21:53:55 +00:00
9ad380ab4c
Define new option, INACCURATE_MICROTIME_IS_OK. When this is defined,
...
the NTP kernel PLL is disabled, and acquire_timer0() is enabled, thus
opening the door for microtime() (and hence gettimeofday()) to return
bogus timestamps. This option is necessary for the `pca' driver to
work, but is implemented to underscore the fact that accurate timekeeping
and the `pca' driver are incompatible at present. If someone writes a version
of microtime() that works when the `pca' driver is being used, this can get
junked.
1994-04-23 21:39:18 +00:00
0897a95d08
device pca0 added
1994-04-23 12:13:27 +00:00
bc906632a8
snd7 config line corrected, irqaremoved
1994-04-13 01:29:14 +00:00
cea06d471b
Remove unneded irq/drq/vector from snd?
1994-04-07 22:18:49 +00:00
32128f4c0d
from kimmel@varese.cs.umass.edu (Matt Kimmel):
...
"el" driver for 3COM 3C501. This driver has some serious performance
problems and drops packets on the floor like hot potatos.
1994-04-07 12:10:31 +00:00
c7ba7a5e32
corrected pointer to sound.doc
1994-04-04 17:27:45 +00:00
27408f32ce
More symtab space.
1994-03-19 22:17:56 +00:00
11e4fa43bc
Added David Mills' kernel NTP PLL code. The current version of NTP does
...
not yet speak to this code.
1994-03-15 01:58:22 +00:00
63a7486262
Removed EXCLUDE_<driver> for sound drivers so that all sound drivers
...
are compiled into kernel. Users are referred to sound doc for info.
1994-03-11 22:17:24 +00:00
62d15cccd2
Added appropriate entries into files.i386 for snd drivers in /sys/i386/isa/sound
...
Added new snd drivers and EXCLUDE_<driver> options to LINT.
1994-03-11 10:31:05 +00:00
9b73b5a04a
dcfclk driver obsoleted, sio/TIOCTIMESTAMP took over.
1994-02-27 21:53:54 +00:00
8d43398bd2
Commented on what the mse0, mcd0, and lpt/lpa devices were used for.
...
(No functional changes)
1994-02-09 05:35:57 +00:00
c1eeb17fc0
Add floppy tape support (missed these when changing G*)
1994-02-07 05:55:50 +00:00
1be30750de
BLANK_SAVER syscons option added
1994-02-01 10:46:43 +00:00
21c64a07fe
Add FADE_SAVER option from new syscons.
1994-02-01 08:34:16 +00:00
da59a31c01
WINE/user LDT support from John Brezak, ported to FreeBSD by Jeffrey Hsu
...
<hsu@soda.berkeley.edu>.
1994-01-31 10:27:13 +00:00
ec40982451
Remove commented out PROCFS, it is standard.
1994-01-29 21:41:36 +00:00
bcbd5c8c3d
Set FIFO_TRIGGER in more human-readable form
1994-01-29 03:17:39 +00:00
690f540c97
Add FIFO_TRIGGER value for sio.c
1994-01-27 01:01:22 +00:00
7e9dd2e95c
Disabled sg disk driver in LINT since there is no sg.c file in isa yet!
...
Removed com port comments, since we are about to depricate the driver.
Fix several plaes in LINT where people have been cutting and pasting using
xterms :-(
1994-01-25 11:08:25 +00:00
bf0e6e5324
Sound driver options added
1994-01-25 03:16:31 +00:00
f4767d9a94
No longer need SYSVIPC option, any of the SYSV options now trigger the
...
kern/sysv_ipc.c file for inclusion in the kernel.
1994-01-22 09:25:37 +00:00
2ae37484c6
System V IPC code from Danny Boulet, chewed on a bit by the NetBSD group
...
and then some more by Jeffrey Hsu (who provided this port for FreeBSD).
1994-01-21 09:56:05 +00:00
db703a94ed
Removed at clause from LINT since it was wrong and is no longer needed.
1994-01-17 05:45:26 +00:00
6216795300
Documented the drivers more in the LINT file. Added a line in files.i386
...
and LINT for the integration of a Seagate ST01/02 SCSI controller.
1994-01-16 12:01:34 +00:00
b2aba26166
Now enabled the line for the 3C509 driver.
1994-01-10 18:53:52 +00:00
1668b3a88d
Added lines for an Etherlink III ( 3C509 ) driver.
1994-01-09 13:30:50 +00:00
f3f1a1b513
SCSIDUMP option no longer needed, it is now standard.
1994-01-06 18:15:20 +00:00
b935223e65
Added dumps on wd0 to the end of all config lines so people know about it
...
and can change it. This really won't change the kernels, it just documents
how to do the dumps on option.
1994-01-05 14:56:50 +00:00
2620c42ea3
Updated config files for new multi-controller wd.c driver and removed
...
outdated wx config file.
1994-01-04 20:10:34 +00:00
990ac0b7cb
Added support for X.25 as a network-layer protocol under ISO TP class 0, as
...
is commonly used in Europe. Make it compile, and bump up symtab space as
needed.
1993-12-19 22:45:13 +00:00
aaf08d94ca
Make everything compile with -Wtraditional. Make it easier to distribute
...
a binary link-kit. Make all non-optional options (pagers, procfs) standard,
and update LINT to reflect new symtab requirements.
NB: -Wtraditional will henceforth be forgotten. This editing pass was
primarily intended to detect any constructions where the old code might
have been relying on traditional C semantics or syntax. These were all
fixed, and the result of fixing some of them means that -Wall is now a
realistic possibility within a few weeks.
1993-12-19 00:55:01 +00:00
6d01f02e51
1) Added proc file system from Paul Kranenburg with changes from
...
John Dyson to make it reliably work under FreeBSD.
2) Added and enabled PROCFS in the GENERICxx and LINT kernels.
3) New execve() from me. Still work to be done here, but this version
works well and is needed before other changes can be made. For
a description of the design behind this, see freebsd-arch or
ask me.
4) Rewrote stack fault code; made user stack VM grow as needed rather
than all up front; improves performance a little and reduces
process memory requirements.
5) Incorporated fix from Gene Stark to fault/wire a user page table
page to fix a problem in copyout. This is a temporary fix and
is not appropriate for pageable page tables. For a description
of the problem, see Gene's post to the freebsd-hackers mailing
list.
6) Tighten up vm_page struct to reduce memory requirements for it. ifdef
pager page lock code as it's not being used currently.
7) Introduced new element to vmspace struct - vm_minsaddr; initial
(minimum) stack address. Compliment to vm_maxsaddr.
8) Added a panic if the allocation for process u-pages fails.
9) Improve performance and accuracy of kernel profiling by putting in
a little inline assembly instead of spl().
10) Made serial console with sio driver work. Still has problems with
serial input, but is almost useable.
11) Added -Bstatic to SYSTEM_LD in Makefile.i386 so that kernels will
build properly with the new ld.
1993-12-12 12:22:57 +00:00
699e9cf137
Fixed spelling error. Added NSIP (XNS over IP). Fixed TP class 4 over
...
IP line (TPIP) to be an option rather than a pseudo-device (the code keys
off #ifdef TPIP, not #if NTPIP > 0, as makes sense).
1993-12-06 01:57:16 +00:00
57bb0ee45f
New version of scsi code from Julian
1993-11-18 05:03:27 +00:00
e13cc161a1
Increased symtab space and added two more options that don't do anything
...
(yet).
1993-11-17 23:24:12 +00:00
9cad5725f1
Added the netrmp protocol from the Net/2 tape. While of dubious utility,
...
it's simple enough that it might actually work and be useful on some systems.
(That's more than you can say for netccitt or netimp!)
1993-11-07 22:54:51 +00:00
87e90eb9f3
Add options MACHVMCOMPAT and bump symtab space appropriately.
1993-11-07 21:46:25 +00:00
cafa6f4851
Fixed comment.
1993-11-07 17:40:05 +00:00
aa2e423c8b
Added some more defines that weren't there before. Also bumped up
...
symtab space again.
1993-11-07 16:44:40 +00:00
3352eb489b
Needed to bump up SYMTAB_SPACE again. (This really should be done by the
...
boot loader...)
1993-11-07 05:26:17 +00:00
6d873e8a1d
Added the option FAT_CURSOR into the GENERIC kernel descriptions for
...
pccons or syscons usage. Modified comment in LINT for FAT_CURSOR.
Now the FAT_CURSOR can be controlled over the option, instead of hacking
syscons.c and pccons.c.
1993-11-03 20:02:23 +00:00
69637c74cd
Add example entries for syscons screen savers and cursor shape.
1993-10-31 00:20:35 +00:00
e597e9115d
Needed to bump symtab space even more (to 102452).
1993-10-23 22:55:43 +00:00
3568631904
Enabled all sound drivers by default.
1993-10-23 22:20:47 +00:00
dd442d34e7
Removed comments from LINT file, left small example for SoundBlaster
...
in its place and moved commentary into /sys/i386/doc/sound.doc
1993-10-23 21:21:52 +00:00
ce551cce65
Add config + files information for new Linux soundcard driver
1993-10-23 10:49:01 +00:00
e2aa2f4e4e
Updated LINT to have the mse0 config line
1993-10-19 19:49:24 +00:00
ec43e20a66
Correct config line for ie0 per Garrett Wollman.
1993-10-18 22:46:58 +00:00
5e89f9d804
Add ie0 (ATT ether net driver) and mcd0 (Mitsumi cd rom driver)
1993-10-12 06:24:02 +00:00
f87a326945
>From NetBSD
...
Change the cpu "i386" line to 2 lines:
cpu "I386_CPU"
cpu "I486_CPU"
This is so we can do real CPU classification of code.
Fix missing depend for assym.s which does depend on genassym.c
1993-10-08 16:52:45 +00:00
1af37a7b59
Remove old ethernet drivers if_ec, if_ne, and if_we from config files
...
and from files.i386, they are no longer supported.
1993-10-01 04:20:19 +00:00
ea3edf6db5
Remove we0, since it is being removed from the system
1993-09-30 20:45:37 +00:00
71b9f75a78
Only configure one cd unit now since the code is fully dynamic,
...
add comment about this to the device cd0 line.
1993-09-30 20:44:32 +00:00
a0ea6f1c94
Added at 0xFE100000 to config line as this kernel HAS to load high, and
...
it is the place people seem to look for samples. Also since this kernel
has so so many symbols in it also added SYMTAB_SPACE=89000.
1993-09-26 23:21:12 +00:00
2eca4bfaec
Enable SYSVSHM, and set SHMMAXPGS=64.
1993-09-24 21:01:11 +00:00
e13ca98c57
Increased pseudo-device bpfilter from 1 unit to 4 units
1993-09-21 06:16:07 +00:00
3bb1d96cd0
Put the uha0 controller at its proper default IRQ of 14! Thanks Warner!
1993-09-13 03:15:26 +00:00
fa96c3be0c
Enabled options NS since it can now be compiled!
1993-09-06 16:17:37 +00:00
e501a58197
Changed default irq and iomem address for ed0 so that most 3c503's and
...
wd80x3 class boards can be configured to the GENERIC kernels.
Entry was:
device ed0 at isa? port 0x280 net irq 9 iomem 0xd0000 vector edintr
Is now:
device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
1993-08-31 15:17:26 +00:00
34f949aed5
Added options MATH_EMULTATE to the kernel config files to pull in the
...
387 math emulator (sys/i386/i386/math_emulate.c). Made that file only
get compiled if options MATH_EMULATE is in the kernel.
1993-08-28 13:21:48 +00:00
17825e1736
Kernel support for ppp 1.3 + fixes
1993-08-27 02:10:12 +00:00
22665bad1f
Added the following line to all the supplied config files to shut up the
...
config program until this thing is fixed correctly.
maxfdescs 2048 #Max file descriptors per process
1993-08-26 17:55:59 +00:00
2365e64f8b
New kernel config file for checking out the kernel sources. It does pulls
...
in every thing that is known to work, and a lot of things that don't!
1993-08-22 02:59:49 +00:00
Joerg Wunsch
David Greenman
Peter Dufault
Poul-Henning Kamp
John Dyson
Garrett Wollman
Andrey A. Chernov
Jordan K. Hubbard
Rodney W. Grimes
Steven Wallace
Bruce Evans
Ugen J.S. Antsilevich
Atsushi Murai
Jean-Marc Zucconi
Paul Richards
Andreas Schulz
Scott Mace
Stefan Eßer
Søren Schmidt
Doug Rabson
Geoff Rehmet
Gary Clark II
Nate Williams
Andrew Moore