657e73c4f5
Add National Instruments "LabPC" driver
1995-04-28 00:51:40 +00:00
e347ee4837
Add ftp.uni-paderborn.de
1995-04-26 14:56:57 +00:00
6dbad786ae
Add LIBFTP.
1995-04-26 14:34:19 +00:00
08af2cee88
Fix some conflicting descriptions.
1995-04-25 17:08:16 +00:00
6940898b50
Document matcd1.
...
Be more explanatory about port selection.
Document that new TEAC drives don't work.
Submitted by: Frank Durda IV <uhclem@nemesis.lonestar.org>
1995-04-25 10:23:53 +00:00
71fbc5ca54
Add more comments for tzsetup and fix some old ones.
1995-04-24 21:03:40 +00:00
570e661f02
(1) Add the chain of dependencies to the targets in the NO_* section
...
too (otherwise the chain won't work).
(2) If NO_WRKDIR is set, "make clean" removes "./.*_done" (assuming
these are cookies...or should I list all the cookies?)
1995-04-24 10:41:51 +00:00
c046aaad20
Move call of fake-pkg from do-install to end of install.
1995-04-24 09:05:34 +00:00
3bf7d64959
Added parseable comments describing the zone each entry represents.
1995-04-23 21:24:54 +00:00
c040025a4b
Add `fe' Ethernet driver man page.
1995-04-23 18:54:40 +00:00
a746536c51
Document COPTFLAGS in addition to CFLAGS.
1995-04-23 13:03:24 +00:00
ffa6d17f61
Ok, this should get the last of the stragglers installed into a new fake-pkg.
1995-04-22 01:22:49 +00:00
ca22b5aa87
Don't try to run the fake-pkg target if NO_PACKAGE is set.
1995-04-22 00:08:06 +00:00
405b7c80bd
Typo: patch -> package
1995-04-22 00:05:46 +00:00
b79219d31a
Instead of copying PLIST over, run pkg_create in a special mode that dumps
...
the fully-formed PLIST to stdout and uses that.
1995-04-22 00:01:26 +00:00
60ee8ee7cb
Major overhaul. The major targets (fetch, extract, patch, configure,
...
build, install) are now all skeletons and do nothing but
(1) Call pre-* target (if exists)
(2) Call scripts/pre-* script (if exists)
(3) Call do-* target
(4) Call post-* target (if exists)
(5) Call scripts/post-* script (if exists)
The do-* targets do all the work. The pre-* and post-* targets/scripts
don't exist by default. The main targets check for the cookies too, so
porters shouldn't have to worry about them at all.
NOTE: THE MAIN TARGETS IN THE PORTS MAKEFILES SHOULD GO AWAY. We need
to fix this before wcarchive comes back up. Change the names to do-*,
rip out the cookies, rip out the calls to pre-* etc. and most of them
should work.
Also, reorganize the whole thing so that similar targets are together
and add more comments. Surround section header with 64 #'s (C-u C-u
C-u # in emacs :).
Hopefully this will be the last major change to bsd.port.mk. Now let
the Makefile-hacking begin.
1995-04-20 18:03:02 +00:00
0892118cdf
1. Add Satoshi's much-requested "fake pkg_add" option to the installation
...
rule.
2. Have all non-X11 prefix using packages include the BSD.local.dist mtree
file for initialization of /usr/local. I'm still not sure if this is
A Good Thing(tm) but I'll see what the users say. It's easily overridden.
3. Standardise on ${PKG_DBDIR} as pointer to /var/db/pkg or local preference.
1995-04-19 15:02:26 +00:00
f744a9768e
Use PKGNAME in the "describe" target (used to generate INDEX) too.
...
Didn't make sense to have two ports with the same name.
1995-04-18 08:24:18 +00:00
60f1eb26c1
Use PKGNAME instead of DISTNAME in messages. To avoid things like
...
"Building for WWW" (pops up in two different ports) "Installing for
web2c-6.1" (ditto), which aren even't reminiscent of the port's real
name.
Sorry jmz, please don't go fix the print Makefiles' own messages.
We are going to take them out after we do the great bsd.port.mk
update anyway.
1995-04-18 08:18:27 +00:00
824cc0cc5d
"package" now depends on "install", so we can do "make -k package" from
...
the top level and have the build-package sequence of each port work
together.
For the old behavior (i.e, just go ahead and blindly pack everything up,
regardless of the contents of work/), there is a new target "repackage".
1995-04-17 06:39:05 +00:00
19eddad0a8
"all" now depends on "build", not "extract configure build".
...
Since "build" depends on "configure", which depends on "patch", etc.,
this shouldn't disrupt any Makefile that doesn't break the dependency
chain.
The old behavior was very annoying because when I did a "make -k",
it would still try to go configure and build even if the extraction
failed.
1995-04-17 06:28:15 +00:00
28cd12e87e
Put David's and my answer regarding loader and kernel memory usage
...
here.
1995-04-16 13:04:21 +00:00
9702179904
Update the link.5 man page to reflect the changes in ld/rtld/link.h.
1995-04-16 12:35:13 +00:00
c4bec2ef93
Install ahc.4.
1995-04-16 00:08:53 +00:00
825402c2ab
Yikes...typo (.package/ should have been .packages/).
1995-04-15 23:56:29 +00:00
e68becc836
To celibrate the new status of the ahc driver, give it a man page.
...
Add references to the ahc driver to the other adaptec man pages.
Remove the "NOTE" section of the ahb man page that complained about
Adaptec's NDA policy preventing 274x driver development.
1995-04-15 21:48:31 +00:00
8b2ceaa471
Add separate entry for screen(1), slightly different from vt220
1995-04-14 15:57:49 +00:00
e6325d4843
vt220: fix k1-k4 to be more compatible with xterm
...
and other emulators.
Simplify se/ue for emulators
1995-04-14 15:38:46 +00:00
dcaaf7cf51
Get the matcd manpage linked into the parent directory like the others.
1995-04-13 20:44:51 +00:00
b9ebe70c00
Add Steve Gerakines <steve2@genesis.tiac.net> to contributors.
1995-04-12 22:47:31 +00:00
e868bdd2a0
Add ethers(5) man page.
1995-04-12 22:16:08 +00:00
a9f9caeabd
Add myself to the Contrib list.
1995-04-11 03:14:50 +00:00
9e87dd6ab1
Don't pass duplicate pkgdeps to pkg_create
1995-04-10 08:09:21 +00:00
b81be3d3e8
Add matcd.4 to list of manpages.
1995-04-09 15:55:21 +00:00
83376d5b95
A new man page for the matcd driver.
...
Submitted by: Frank Durda IV <uhclem%nemesis@fw.ast.com>
1995-04-09 15:49:46 +00:00
a8f0877be0
Add new -P argument to pkg_create.
1995-04-09 15:00:56 +00:00
489c51e631
Add 2 new targets to facilitate some things I'm thinking about.
...
1. package-name
Simply echos the associated package name for a port (if any).
2. package-depends
Shows all package names on which this port depends.
1995-04-09 12:27:58 +00:00
c4fb365962
1. Fix the first line (should be a proper comment - silly emacs).
...
2. KEYWORDS+= CATEGORIES
3. CATEGORIES+= all (always want to be in "all"!)
1995-04-09 10:24:09 +00:00
3d0c66c99a
Add support for categorized subdirectories for packages. By default,
...
all .tgz files go to /usr/ports/packages/.packages, and a relative
symlink is created for every item in CATEGORIES...i.e., if "CATEGORIES
= foo bar", then /usr/ports/packages/{foo,bar}/pkgname.tgz both point
to /usr/ports/packages/.packages/pkgname.tgz.
Suggested by: jkh
1995-04-09 09:59:42 +00:00
5a12a69a54
Document that flags 0x1 is required on fdc0 line to make ft0 work.
...
Also please note that previous commit regarding UH24F controller was
misattributed to Poul - it was Steve's!
Submitted by: Steve Gerakines <steve2@genesis.tiac.net>
1995-04-09 07:02:03 +00:00
881c5753b5
Could you please update the list of drives supported. It currently
...
lists:
UH-14f Series <ISA>
UH-34f Series <EISA/VLB>
Should read:
UH-14f Series <ISA>
UH-24f Series <EISA>
UH-34f Series <VLB>
Submitted by: phk
1995-04-09 06:59:42 +00:00
d95f5d1983
pcvt is proud enough to have a man page. :)
1995-04-08 20:08:42 +00:00
785b47579d
Upgrade pcvt to 3.20 b24.
1995-04-08 16:04:22 +00:00
1e85d7f664
Added Dean Huxley <dean@fsa.ca>.
1995-04-08 09:40:18 +00:00
f9fc2cff0c
Fixed a big typo pointed out by phk.
1995-04-07 16:45:35 +00:00
b43cac1cdd
Added Nobuhiro Yasutomi and Akito Fujita, deleted me (Satoshi, not
...
Michael :) from "Additional Contributors" list.
1995-04-06 17:26:14 +00:00
f85e2485b8
The skeletal framework for the FreeBSD help system. Point a WWW
...
browser at index.html to see how it works. Ultimately what currently
lives in the tutorials section will become the User and Admin manual
sections.
1995-04-06 15:56:10 +00:00
3df0a1ed3f
Add Satoshi Asami.
1995-04-05 10:22:58 +00:00
7ab533048d
Update information on newsgroups.
1995-04-05 10:04:56 +00:00
55f61a13e3
Latest language support changes from Wolfram.
...
Submitted by: Wolfram Schneider <wosch@cs.tu-berlin.de>
1995-04-05 08:02:52 +00:00
761b249a88
Latest language support changes from Wolfram.
...
Submitted by: Wolfram Schneider <wosch@cs.tu-berlin.de>
1995-04-05 08:02:24 +00:00
d5b3cf8435
options LKM is now the default. No need to reference option that's
...
already turned on (and isn't in LINT).
1995-04-05 01:06:00 +00:00
30854325fe
Add USE_X11 for ports which are X11 users but don't use IMAKE.
1995-04-04 05:57:19 +00:00
9a8496fd7b
Remove a `.' from the end of the echo line
...
`>> Attempting to fetch from $${site}' as it is misleading
1995-04-04 04:23:37 +00:00
a6ae8257a8
By default, KEYWORDS is a copy of CATEGORIES.
1995-04-01 10:01:49 +00:00
c9cf4a47d8
Add default values and document them for CATEGORIES and KEYWORDS.
1995-04-01 09:35:29 +00:00
2cc9ea7aee
Add support for new CATEGORIES and KEYWORDS fields.
1995-04-01 09:34:11 +00:00
5c95f7a6dc
Add Delete key description
...
Fix Right window/Left window/Menu keys numbers
1995-03-30 00:22:29 +00:00
3bea04e934
Remove syscons example
1995-03-30 00:05:58 +00:00
a01bd386af
Do what should have been done in v1.14
...
*Really* strip out unused local symbols from shared objects.
This was a typo on my part caused by an assumption that the profiled
libraries stripped symbols that same way as the non-profiled libraries.
Cut-n-Paste strikes again.
Obtained from: NetBSD
1995-03-28 17:54:11 +00:00
81855a2ac4
Update cons25 to S0ren ^H back changes
1995-03-28 05:43:58 +00:00
df32d0cc55
Add support for "distributed" patches and a little extra cleanup.
...
New variables:
PATCH_SITES: patch equivalent of MASTER_SITES, overridable with
. MASTER_SITE_OVERRIDE.
PATCHFILES: Additional files to fetch and give to patch before
. applying the ones in patches/patch-*. If name ends
. with ".gz" or ".Z", it will be piped through zcat first.
Plus PATCH_DIST_STRIP and PATCH_DIST_ARGS that serve the same functions
as PATCH_STRIP and PATCH_ARGS for patches in patches/patch-*.
In the documentation and echo messages, I used the term "distributed
patches" and "FreeBSD patches" to refer to ${PATCHFILES} and patches/patch-*.
If you can come up with better names, by all means go ahead and fix them.
"grep PATCH /usr/ports/*/*/Makefile" reveals seven ports (mule, jless,
jtcl, jtk, dgd, less, color_xterm, gee I wonder why I'm the one who
implemented this) that can benefit from this. I'm now diving headlong
into /usr/ports to fix their Makefiles.
1995-03-28 01:14:29 +00:00
19c66761c7
Give backspace to the people (again)
...
Now the keymaps are as follows:
"backspace / <-" ^H
"grey del" ^? (0x7f)
"numpad , del" ^? (, if numlocked)
1995-03-27 19:41:11 +00:00
32c4c80bff
Added more standard package suport file names. INSTALL for the
...
installation script, DEINSTALL for the deinstallation script, and
REQ for the requirement script, will be added with appropriate
flags to PKG_ARGS if they exist under pkg/.
1995-03-27 13:11:18 +00:00
8e3cede18e
Fix duplicate.
1995-03-27 05:08:43 +00:00
aca38c3602
pc3r (russian): change kD to old compatible value.
...
vt100: remove obsoleted nl
1995-03-27 04:55:41 +00:00
910e8e7cc1
Set kb=\177 to make proper erase char for DEC VTs
1995-03-27 03:46:05 +00:00
4717f90280
Add :ut to vt100 generic entry
1995-03-27 01:36:00 +00:00
3952ec9bdb
Yet one pass through DEC VT entries
1995-03-27 00:55:51 +00:00
2adf028be3
Add eo:it#8 to vt100 entry
1995-03-26 01:30:33 +00:00
c6159a7bd8
vt100/102/220 entries affected:
...
major cleanup
add lot of missing capabilities
1995-03-26 01:02:54 +00:00
3268de551f
Add gil.physik.rwth-aachen.de to mirrors
1995-03-25 18:15:12 +00:00
d92d2e1236
Update the kernel debugging FAQ to match the new (k)gdb and new DDB
...
symbol behaviour.
1995-03-25 12:35:00 +00:00
0b15614f22
Back out previous patch - better kept as a reminder.
1995-03-24 06:44:55 +00:00
c0844b4775
Add yet one popular russian keyboard variant
...
Submitted by: Serge Babkin <babkin@hq.icb.chel.su>
1995-03-24 05:40:17 +00:00
cf522ac9ff
Comment out a table of contents spec that didn't exist.
1995-03-24 04:42:21 +00:00
7bf4ec6f56
Add the font index file. Other languages (French, Swedish, other)
...
needed for this file!
1995-03-24 01:11:56 +00:00
f6f4d4be87
Add the keymap index file. Other languages (French, Swedish, other)
...
needed for this file!
1995-03-24 01:11:40 +00:00
c534dadbfe
Add a misssing `@' from before echo -n "|${MAINTAINER}"
1995-03-23 20:42:42 +00:00
06b0ad8a6f
/etc/rc.netstart back to /etc/netstart
1995-03-23 06:05:04 +00:00
4642c87ca4
netstart -> rc.netstart
1995-03-23 01:49:15 +00:00
5abc844b74
Add maintainer to the index line.
1995-03-22 21:46:04 +00:00
2d333dc2dd
Add new EXTRACT_BEFORE_FLAGS and EXTRACT_AFTER_FLAGS variables to make
...
complex extraction rules easier.
1995-03-22 21:28:31 +00:00
2efda52f23
Make the fetch message a little more interesting and informative.
1995-03-21 22:43:36 +00:00
c80053bc55
Do a big re-org of the FAQs along the lines of those discussed awhile back.
...
It's time to start moving in the directions we've had in mind for awhile.
SGML for everything new and old stuff moved into a location where it can slowly
be aged and removed (basically, Text/).
1995-03-21 20:19:47 +00:00
3dd8895eb8
Add fetch-list command for Rod
...
Use ECHO_MSG macro for printing "===>" line things so that I can now turn
those OFF when I don't want them.
1995-03-21 03:59:13 +00:00
6950e7e24e
make.conf doesn't postulate anything about libm now.
1995-03-21 02:55:33 +00:00
bc202f1b6e
Make the describe rule generate more thorough information that's actually
...
of use to a front-end program. Back out my bogus description of the `index'
target! :-)
1995-03-21 01:51:12 +00:00
9608972d54
Document the index target.
1995-03-21 01:31:43 +00:00
be27572a45
Better spelling of my name
1995-03-21 00:37:07 +00:00
39ad1abd89
Take out obsolete KERBEROS_IV build variable. Just eBones now.
...
Submitted by: Mark Murray <mark@grondar.za>
1995-03-20 21:35:15 +00:00
27a15c94ed
Add support for pseudo-device LKMs.
1995-03-20 19:18:51 +00:00
261bbea610
Don't do anything if BATCH is specified and the port is interactive for
...
the package target.The port may is not build and the package fails
otherwise.
1995-03-20 00:41:36 +00:00
0bc6b9462b
Change the xmkmf call to a xmkmf -a call. This should be more correct for
...
all X11R5 and X11R6 ports. This is the way how it should be normally
used according the manuals. Only pre-X1R5 ( X11R4, X11R3) ports can't
handle it.
1995-03-19 12:49:06 +00:00
62e2a046b2
Obtained from: 1.1.5 (originally by Andrew Moore)
...
Add the manpage for the stuff in <machine/floatingpoint.h>.
1995-03-18 16:54:35 +00:00
38b590b187
Fix a spelling error.
...
Submitted by: Stephen McKay <syssgm@devetir.qld.gov.au>
1995-03-16 22:03:09 +00:00
b372c217fc
Fixed Stephen McKay's email address.
1995-03-16 22:01:57 +00:00
0e5ca0d837
Document net.inet.ip.sourceroute MIB variable.
1995-03-16 18:24:19 +00:00
16ecbe2b7f
Added cons30, cons43 and cons60 terminal types (==cons25 with more lines).
...
Theres a mono entry for them all, and cons50 already existed.
1995-03-16 01:37:41 +00:00
3c6e6efc95
Added manual page for DEC DEFPA and DEFEA FDDI adapters.
...
Submitted by: Matt Thomas
1995-03-14 09:27:20 +00:00
40ac60750c
Could some kind soul with commit power please add this site to the mirrors
...
list? (It should be added at the bottom to the sites serving export-
restricted code, please)
Country Site and Maintainer
======= ========================================================
Brazil ftp://ftp.iqm.unicamp.br/pub/FreeBSD
Pedro A M Vazquez <vazquez@iqm.unicamp.br>
Reviewed by: roberto
Submitted by: Mark Murray <mark@grondar.za>
1995-03-12 22:34:05 +00:00
b97fb5afcb
Add Ollivier as the main FAQ guy...:) (Whew)
1995-03-11 19:13:26 +00:00
c2766222c3
Add the excellent part on serial communications by Sean Kelly. That's a
...
great job, thanks Sean !
Reviewed by: roberto
Submitted by: Sean Kelly <kelly@fsl.noaa.gov>
1995-03-11 16:48:17 +00:00
812a118139
Add protected and empty maninstall: targets.
...
Submitted by: Philippe Charnier <charnier@lirmm.fr>
1995-03-10 08:54:42 +00:00
1dcbf7af64
LIBPCAP -> ${DESTDIR}/usr/lib/libpcap.a
1995-03-08 09:01:32 +00:00
05048ea000
Correct a few URL for ftp.FreeBSD.ORG.
1995-03-07 13:54:44 +00:00
ffa717dd36
Change some names to First_name Last_name with proper capitalization.
...
Fix a typo.
1995-03-06 09:54:06 +00:00
1dd5ec0345
Add a remark about the new ctm-announce list. Everyone that use CTM
...
SHOULD subscribe to it.
Reviewed by: roberto
Submitted by: Poul-Henning Kamp <phk@login.dknet.dk>
1995-03-05 23:13:08 +00:00
cb282243be
This time add the real man pages for "pt" and "worm".
1995-03-04 20:56:39 +00:00
8bcbc1f424
Add processor and worm drivers
1995-03-04 20:54:24 +00:00
a1bb896c3a
Use \E[x in "op" for cons25
1995-03-04 20:14:28 +00:00
21fa3d85e3
"vidcontrol -s" -> "modload"
1995-03-04 08:03:28 +00:00
3c4d31f1c8
Add support to miss out ``DUDS'' subdirectories. See thread in freebsd-ports
...
for more.
1995-03-03 23:30:32 +00:00
12a34c80d0
Upgrade cons25 and cons25-r to lastest syscons changes
1995-03-03 23:29:22 +00:00
2a999a94c3
Remap Grey Delete to ESC[~
1995-03-03 23:21:52 +00:00
72fe72793f
Remove unwanted change sneaked in
1995-03-03 23:17:32 +00:00
ac9de083c6
Restore russian traditions
1995-03-03 22:55:02 +00:00
fe8d7aae57
Remove bogus email message from the top.
...
Change spelling of "obsolute" to "obsolete" ("obsolute" is the pinacle
of obsolescence :-).
Submitted by: me
1995-03-03 20:17:16 +00:00
9aae4932d6
Have this resemble an actual german keyboard a bit more ...
1995-03-03 18:26:10 +00:00
dc463a367e
Minor update to syscons.
...
Let "grey delete" be a function key (default is 0x7f)
Fix the xor cursor again..
Made the backspace key generate del as default
Made CTRL-space generate nul as default.
1995-03-03 08:37:52 +00:00
0722449a9b
Back out my previous change. I need to really think about this.
1995-03-03 07:42:10 +00:00
493d75a9d5
A small feature just for my own use.
1995-03-03 06:53:27 +00:00
0e6a76efea
Add notice for Jordans submitters.FAQ.
...
Cleaned up entry on sup to point to the correct area.
1995-03-02 19:34:05 +00:00
3d0dfb4eea
My first rough cut at a guide to new submitters. I started out answering
...
someone's question and ended up writing an entire FAQ - I *hate* that! :-)
1995-03-02 12:28:04 +00:00
f0ce30bcf4
Add this file here so I finally have something to point people at as a
...
prototype.
Obtained from: U.C. Regents standard copyright.
1995-03-02 12:00:16 +00:00
d3468839bf
Add Bill Paul to contributors list. We probably need a "FreeBSD associates"
...
list or something since there are many contributors now but very few on
the order of folks like Bill or Satoshi or Jean-Marc.. This seems unfair.
Suggestions?
1995-03-02 07:20:59 +00:00
2460bdf04b
Updated man pages to reflect new configuration options. These man pages
...
are getting pretty out of date and need to be visited some more.
1995-03-01 22:32:38 +00:00
d33ac9d9a8
Update entry.
1995-03-01 06:43:12 +00:00
87d17a3130
Update some of the FTP entries here.
...
Also correct name of sup package
1995-03-01 06:12:15 +00:00
3938d930a1
Try to be even more understandable and clear.
...
What I need is a good speech writer...
1995-03-01 05:41:14 +00:00
90e614df0f
Fix a minor grammar bug.
1995-02-28 00:24:47 +00:00
db312e6697
Delete one of the two references to intro(3) in the SEE ALSO section
...
and add an intro(7) instead.
1995-02-28 00:19:41 +00:00
ecea97a372
build the link from man8/man8.i386/MAKEDEV.8 toman8/MAKEDEV.8 so that this
...
manual page can now also be read.
Change the references in MAKEDEV from com to tty and delete flog and add
sd instead.
Need much more work, but for today, after i lost my first changes through
a new sup :-), that's enough.
1995-02-28 00:16:13 +00:00
16818161a3
Many stylistic and grammar changes.
1995-02-28 00:13:20 +00:00
c855f71f96
Updated.
1995-02-27 23:58:19 +00:00
446cbcf7ed
Snoop device stuff
...
* Make snoop see the output in tty ECHO mode
* Allow writing to observed tty (very funny)
* Fix and extend watch util.
* Fix and update manpages
1995-02-27 19:45:57 +00:00
841d930e9d
Another shameless plug for CTM :-)
1995-02-27 08:31:19 +00:00
015d0d4157
Document CTM now that it went public.
1995-02-27 08:25:53 +00:00
22cb53a866
Update Mitsumi CD-ROM entry to state we do not support the IDE
...
interfaces.
1995-02-26 21:27:29 +00:00
4640bd1515
The latest version of XFree86 is 3.1.1.
1995-02-25 23:42:14 +00:00
653ae0189f
Updated the FAQ. Would everyone please review their sections.
...
e.g.
Non-USA DES
Networking cards
Do we have an update kernel debugging FAQ?
I'll posting the FAQ on SUNDAY!!
1995-02-25 23:00:50 +00:00
ffd87c071d
"make distribute" have changed, beware if you use it.
1995-02-25 20:51:14 +00:00
8340e9ceab
Update to reflect new calling conventions
1995-02-25 20:15:20 +00:00
4e1d0de380
cons25: turn off bold in "op" escape
1995-02-25 13:49:47 +00:00
b71bca73b6
Add commeent to say that this manpage is out of date
...
and will be rewwritten..
1995-02-24 14:33:18 +00:00
8f72439b71
Update my mail addr, now that i've got my own subdomain.
1995-02-23 20:34:09 +00:00
7fec27e124
Correct error in structure definition
1995-02-23 01:27:17 +00:00
533f4c5076
Clean up man page
1995-02-23 01:25:48 +00:00
95344a43ed
Put the joystick status in a struct {int x, y, b1, b2;} rather than in a
...
dummy array of 4 integers. Declare the struct in the header file and update
the man page.
1995-02-22 23:34:58 +00:00
343f523cb9
Added name to contributor list.
1995-02-22 22:57:20 +00:00
07d35ca333
Add my thin 8x16 font with ISO-8859-1 characters.
...
Sorry, no 8x8 or 8x14 font.
1995-02-22 21:49:53 +00:00
1242c0a653
Added six new thin fonts (great on laptops)
...
Cleaned up Makefile
1995-02-22 14:03:16 +00:00
dd33263156
Add a man page for the Sony CDROM driver. Other driver authors, you might
...
do a quick check here..
1995-02-22 13:30:39 +00:00
f99949bf6c
Added entry from Jim Bryant
1995-02-22 03:49:46 +00:00
e8d94d90b8
Add Ollivier and Satoshi to list of contributors.
1995-02-20 16:24:30 +00:00
304bce7fcf
Add Gary J. for all his fine work with gdb and other things.
1995-02-20 12:45:09 +00:00
e84c2699b9
Change DIR to VOLUME so that this installs in the correct location.
1995-02-19 09:11:30 +00:00
590d3b8680
Add Nate back as promised before, but I will also note that he's on
...
probation.. Another vanishing act and I won't hesitate to nuke this back
out again. He hasn't been heard from very much since he was over here to
visit! :-)
1995-02-18 09:31:16 +00:00
f4fcba6266
1. Add Justin Gibbs
...
2. Make all the core team members use FreeBSD.org - it just looks better.
1995-02-18 04:07:09 +00:00
a53227ff18
Move ipfirewall.4 & snp.4 facility manpage
...
to share/man/man4
1995-02-17 18:48:36 +00:00
68be960997
Removed the bogus duplicate pcvt* alias names. Ache renamed them
...
to shut up cap_mkdb warnings, but they better have to go away.
Reviewed by: Hellmuth Michaelis
1995-02-17 14:06:51 +00:00
664b5e14dc
Always go to ${WRKDIR} before extraction. Modify the tar extract command
...
args to take advantage of this.
Pointed-out-by: asami
1995-02-17 08:52:55 +00:00
8b47b44cc0
Spell my name with an umlaut. Looks better to me. :-)
1995-02-16 12:04:53 +00:00
d5b8d6b667
Update my email address.
1995-02-16 03:13:50 +00:00
d69128d862
Document Transaction TCP.
1995-02-15 22:07:28 +00:00
37c4acbb58
Make the email address syntax more regular
...
Add pointer to Mark Murray's foreign eBones/secure site.
1995-02-15 07:07:18 +00:00
38eb155156
Add Hong Kong mirror.
1995-02-15 06:41:50 +00:00
a2cc1fa205
Document TCP MIB variables (tcp.4).
...
Document IP MIB variables (inet.4).
Document Internet-family protocol-specified route cloning (inet.4).
Delete all references to classed addresses (inet.4).
1995-02-15 03:30:54 +00:00
8f283fdc8f
Move apm(4) to i386 section, since it is i386-specific.
1995-02-15 01:20:03 +00:00
05002e8cb5
Make the checksum target not bomb out if there is a mismatch, just
...
print a warning. A better fix will come along just as soon as I
work out what it is.
1995-02-14 21:29:28 +00:00
70b344d1af
Added Matt Thomas' e-mail address.
1995-02-14 20:20:46 +00:00
4a218a6de8
Remove use of ${DESTDIR} in target of symbolic link, it makes the link
...
point to the wrong place.
1995-02-14 19:43:09 +00:00
d06b2f2908
Another one...
1995-02-14 19:39:50 +00:00
47ccef1936
More people not on the list.
...
Submitted by: se
1995-02-14 19:19:15 +00:00
00ee0c15e4
Gene Stark added. Should have been here for a long time already.
...
Anybody else missing ?
1995-02-14 18:04:16 +00:00
a2d29640be
Added a bunch of people who deserved it.
1995-02-14 04:07:59 +00:00
cc01ee1e51
Shut up cap_mkdb warnings on pcvt* entries
1995-02-11 15:16:11 +00:00
d80a026702
Make sure that info files never hit the "bin" dist.
1995-02-11 05:28:31 +00:00
dc81ebd7a2
Change my email address.
1995-02-09 12:49:41 +00:00
b7e56a8d18
Add L Jonas Olsson <ljo@amcell2.caisr.cwru.edu>
1995-02-09 12:45:42 +00:00
1aa515e96a
Update some folks who were inadequately credited. Still at least 2 more
...
passes thru this file required.
1995-02-09 11:11:39 +00:00
cdaec7b1a1
More complete implementation of SUBDIR for programs, libraries and kmods.
...
`depend' wasn't supported. This seems to have only broken `make depend'
in gnu/usr.bin/ld.
bsd.prog.mk:
Build the man pages in ${MANDEPEND} at build time.
1995-02-08 21:35:31 +00:00
7111dc5ac1
CLEANFILES was missing most of the source links.
1995-02-08 21:27:09 +00:00
e687de7a15
Allow arbitrarily named configure script for use w/ HAS_CONFIGURE.
1995-02-06 08:52:19 +00:00
5b07358347
Add the ports-base target and correct two typos (hosbase!=hostbase)
1995-02-05 23:31:25 +00:00
f534e77446
Add pcvt termcap entries (quite a lot of them - whew!)
...
Submitted by: hm
1995-02-05 11:17:03 +00:00
6554acd8ba
Add man page for pcvt console driver.
...
Submitted by: hm
1995-02-05 11:16:33 +00:00
4620f0962b
Use absolute path to md5 program. It lives in /sbin and people are unlikely
...
to have $PATH to it.
1995-02-04 22:56:28 +00:00
7a614290f3
Added final '\n'.
1995-02-04 19:59:58 +00:00
a309714274
Add missing trailing '\n'
1995-02-04 19:56:39 +00:00
94dcffca87
Add long-awaited (:) support for sophisticated dependency checking. We now
...
have three variables:
EXEC_DEPENDS - A list of "prog:dir" pairs of other ports this
package depends on. "prog" is the name of an
executable. make will search your $PATH for it and go
into "dir" to do a "make all install" if it's not found.
LIB_DEPENDS - A list of "lib:dir" pairs of other ports this package
depends on. "lib" is the name of a shared library.
make will use "ldconfig -r" to search for the
library. Note that lib can be any regular expression,
and you need two backslashes in front of dots (.) to
supress its special meaning (e.g., use
"foo\\.2\\.:${PORTSDIR}/utils/foo" to match "libfoo.2.*").
DEPENDS - A list of other ports this package depends on being
made first. Use this for things that don't fall into
the above two categories.
DEPENDS behaves exactly like before, so old Makefiles will still work
the same. The two variables are lists of pairs as described above.
For instance, if your program depends on unzip and libjpeg.5.*, use
the following definitions:
EXEC_DEPENDS= unzip:${PORTSDIR}/archivers/unzip
LIB_DEPENDS= jpeg\\.5\\.:${PORTSDIR}/graphics/jpeg
gmake:${PORTSDIR}/utils/gmake is automatically added to EXEC_DEPENDS
if USE_GMAKE is defined.
If NO_DEPENDS is defined, the list will just be printed out one by one.
1995-02-04 05:49:26 +00:00
5143382afe
Create an obj symlink when necessary.
...
Submitted by: "Remy CARD" <Remy.Card@masi.ibp.fr>
1995-02-02 04:53:30 +00:00
cc715f2bca
Start the ball rolling by sticking a
...
MAINTAINER?= line in here.
Idea by: jkh@FreeBSD.ORG
1995-02-01 21:47:57 +00:00
4350346dea
Change the way I make the link to /etc/termcap. It worked for install
...
but not distribute. Now it works for both.
1995-02-01 08:32:05 +00:00
45a52e5c98
Add our new Swedish mirror site.
1995-01-30 21:58:39 +00:00
123222dbd7
Minor fixes to syscons. Blink cursor fixed. History buffer fixed.
...
kbdtables updated with boot option for CTL+ALT+DEL
1995-01-30 21:39:18 +00:00
3f4fff96f9
Make fetch a bit more forgiving of subdirs.
1995-01-30 10:06:56 +00:00
6098353123
Add LN_FLAGS to all the places it makes sense.
1995-01-30 07:22:02 +00:00
45f7d107ac
Add new LN_FLAGS variable for making LINKS symbolic and whatnot.
1995-01-30 07:20:01 +00:00
ed0770e938
Make a link to /etc for termcap file. /etc/termcap is just too lodged in
...
folklore to do without! :-)
1995-01-30 07:19:02 +00:00
f3bee8cfe4
Make the default paths a bit more rational for our systems (sheesh!).
...
Thanks, Sean!
Suggested by: Sean McDermott <spm@staff.cc.purdue.edu>
1995-01-29 08:01:05 +00:00
50d97d16d4
Give this a serious dose of reality by adding the last 2-3
...
months worth of new sup targets!
1995-01-29 06:46:27 +00:00
a926a37b0a
Third round in syscons update.
...
Display update method changed, now allways write in memory buffer,
then periodically update physical display.
Speed improvements (now > 5 times faster than the old syscons).
History now circular buffer, with changeable size.
History scroll by up/down line, up/down page, home and end.
Backtab proberly implemented.
Now space for 96 function keys, 63 allocated standard, default now
SCO/SYSV compat again as in the old days.
New keyboard definition files ~share/syscons/keymaps/*
Misc fixes for old "hacks" that broke SCO/SYSV compat.
More that I forgot before writing this...
1995-01-28 22:18:05 +00:00
ebf5d6bd28
Delete a bogus :.
1995-01-28 13:17:38 +00:00
bc046396d6
Update these to be a little more business-like in appearance.
...
Delete obsolete information.
1995-01-27 23:15:31 +00:00
2e442ca3f4
Man page for the new nca driver.
1995-01-27 07:54:59 +00:00
49a5c6fd25
Change overloaded Keypad 5 to fkey65
1995-01-26 11:22:01 +00:00
e4707252dc
Upgrade Back tab & Keypad 5 info
1995-01-26 11:04:52 +00:00
e7a1520824
Describe Left window, Right window and Menu keys
1995-01-26 09:24:14 +00:00
6b1499efe8
Remove Delete remapping, unneccesary now
1995-01-26 09:10:41 +00:00
3f18ada3a6
Describe Delete key
1995-01-26 09:05:22 +00:00
771930da08
Correct Delete key description
1995-01-26 08:48:13 +00:00
4c03cbeb25
Describe Delete key
1995-01-26 08:45:51 +00:00
01ab76f4b8
Add joystick man page
1995-01-25 21:41:09 +00:00
316cd0cfdd
LIBFORMS & LIBSCSI added
1995-01-25 20:24:01 +00:00
9be2a2b045
Add links from mem.4 to kmem.4.
1995-01-25 09:43:20 +00:00
7a4bbce6f2
Added link from utmp.5 to lastlog.5.
1995-01-25 09:35:47 +00:00
db35f309d1
Added more missing manual pages from 1.1.5.
1995-01-25 09:18:56 +00:00
798bb3d232
Install bpf manual page.
1995-01-25 08:47:30 +00:00
60d06671c1
Added bpf(4) manual page from 1.1.5.
1995-01-25 08:46:06 +00:00
ad1565eef3
NOOBJS was bogus - use the already extant `NOOBJ'.
1995-01-24 17:50:30 +00:00
62ef745576
Add the ability to say `NOOBJS' to indicate that the target has no object
...
files.
1995-01-24 17:33:22 +00:00
825de56725
Fix bogus tab in makesum target.
1995-01-24 02:41:52 +00:00
e593239fdb
Fix this bogus Makefile.
1995-01-24 00:36:27 +00:00
20da3572df
Fix more deranged targets.
1995-01-24 00:28:51 +00:00
b37499c044
Fix bogus all & clean rules.
1995-01-24 00:23:34 +00:00
4eed8738b3
Fix bogus tab.
1995-01-24 00:22:24 +00:00
8d81c12227
Whomever put the depend rule in screwed it up. Fix it.
1995-01-23 20:53:38 +00:00
1df516f280
Eliminate a bogus stray tab.
1995-01-23 20:50:56 +00:00
7b2bb0fb79
Set PREFIX in the build target. Suggested by John Fieber.
1995-01-23 18:22:36 +00:00
6b21ba4ff4
Update the Korean admin's address.
1995-01-23 02:37:04 +00:00
74d7962900
Oops. Fix up the checksum routine - my last commit broke it slightly.
1995-01-22 20:40:48 +00:00
edf1160963
Build ref.bib.i in the object directory.
1995-01-22 16:49:22 +00:00
3ece328451
Put brackets around EXTRACT_CMD, can be several commands here
1995-01-17 23:55:53 +00:00
3a99ffc355
Remove -Wall for ascii formatting, we don't need so many
...
warnings while formatting standard BSD docs
1995-01-17 22:04:38 +00:00
932c9d1896
Modify prev. change, pass internal args directly to groff,
...
if PRINTER == ascii, because nroff shell script strip off
some groff flags
1995-01-17 21:36:06 +00:00
a812882b19
Call nroff, if PRINTER == ascii
1995-01-17 21:27:30 +00:00
93b3f6d096
Nuke BSD tmac
1995-01-17 19:10:35 +00:00
2db2081438
Correct a small problem in that when there isn't a checksum for that
...
particular file, but there is a files/md5, it reports that it failed
the checksum
1995-01-16 23:33:08 +00:00
eda3ffc7c2
Add the Adaptec 282x Series of controller to the supported controllers.
...
They seem to be detected and working ok from the aic driver.
1995-01-16 19:19:14 +00:00
9088576b20
Could someone please add the following patch to
...
/usr/src/share/termcap/termcap.src? It defines the sequences emitted
by the PageUp, PageDown and Keypad-[79513] keys.
Submitted by: Thomas Gellekum <thomas@ghpc8.ihf.rwth-aachen.de>
1995-01-16 17:29:29 +00:00
9bc89504b8
Remove duplicated ec capability
1995-01-15 06:31:14 +00:00
bf8a2c7b91
Fix cv & ch to increment pos by one
1995-01-15 06:26:58 +00:00
e7f8d55240
Slightly more complete implementation of SUBDIR for libraries.
1995-01-14 22:18:15 +00:00
83fc2a702a
Add SUBDIR facility to bsd.lib.mk like in bsd.prog.mk.
1995-01-14 22:14:54 +00:00
b6cc3bfac6
The enclosed patch fixes the Makefile contained in
...
share/doc/usd/{30.rogue,31.trek}: make fails if the games source
tree is not present (see the mail that I have sent yesterday).
This patch makes the Makefiles test if the games source
tree is present. If it is not present, the Makefiles default to
no operation.
1995-01-14 19:56:16 +00:00
7f272b53a0
The enclosed patch fixes the Makefile contained in
...
share/doc/usd/{30.rogue,31.trek}: make fails if the games source
tree is not present (see the mail that I have sent yesterday).
This patch makes the Makefiles test if the games source
tree is present. If it is not present, the Makefiles default to
no operation.
[Note: I'm not sure if the Makefile changes might not be collapsable into
a shorter format, but I'll just leave it this way for now and be safe -jkh]
Submitted by: Remy Card <Remy.Card@masi.ibp.fr>
1995-01-14 19:55:40 +00:00
314bc6245e
The enclosed patch makes bsd.doc.mk consistent with bsd.prog.mk
...
when creating the obj link. While bsd.prog.mk inconditionnaly creates
a link in /usr/obj, bsd.doc.mk tests if the source tree is contained in
/usr/src. If so, it creates a link to /usr/obj. If the source tree
is contained in another directory, bsd.doc.mk creates an obj subdirectory.
Submitted by: Remy Card <Remy.Card@masi.ibp.fr>
1995-01-14 19:49:54 +00:00
af8dd62b9a
The enclosed patch is a cosmetic change to bsd.prog.mk. When
...
a program directory has subdirectories, make now prints "===> dir/subdir"
instead of "===> subdir". This is modeled after the rules contained in
bsd.subdir.mk.
Submitted by: Remy Card <Remy.Card@masi.ibp.fr>
1995-01-14 19:48:49 +00:00
4d12ebe42c
Silence `make -ss'.
1995-01-14 09:48:14 +00:00
Peter Dufault
Torsten Blum
Jordan K. Hubbard
Garrett Wollman
Satoshi Asami
Joerg Wunsch
Andreas Schulz
Justin T. Gibbs
Andrey A. Chernov
Bill Paul
Martin Renters
Poul-Henning Kamp
John Fieber
Gary Palmer
Nate Williams
Søren Schmidt
Bruce Evans
David Greenman
Ollivier Robert
Gary Clark II
Rodney W. Grimes
Andras Olah
Dima Ruban
Stefan Eßer
Paul Traina
Ugen J.S. Antsilevich
Jean-Marc Zucconi
L Jonas Olsson
Jeffrey Hsu