This directory contains the source files for libmilter. The sendmail Mail Filter API (Milter) is designed to allow third-party programs access to mail messages as they are being processed in order to filter meta-information and content. This README file describes the steps needed to compile and run a filter, through reference to a sample filter which is attached at the end of this file. It is necessary to first build libmilter.a, which can be done by issuing the './Build' command in SRCDIR/libmilter . NOTE: Both libmilter and the callouts in sendmail are marked as an FFR (For Future Release). If you intend to use them in 8.10.X, you must compiled both libmilter and sendmail with -D_FFR_MILTER defined. You can do this by adding the following to your devtools/Site/site.config.m4 file: dnl Milter APPENDDEF(`conf_sendmail_ENVDEF', `-D_FFR_MILTER=1') APPENDDEF(`conf_libmilter_ENVDEF', `-D_FFR_MILTER=1') You will also need to define _FFR_MILTER when building your .cf file using m4. +-------------------+ | BUILDING A FILTER | +-------------------+ The following command presumes that the sample code from the end of this README is saved to a file named 'sample.c' and built in the local platform- specific build subdirectory (SRCDIR/obj.*/libmilter). cc -I../../sendmail -I../../include -o sample sample.c libmilter.a ../libsmutil/libsmutil.a -pthread It is recommended that you build your filters in a location outside of the sendmail source tree. Modify the compiler include references (-I) and the library locations accordingly. Also, some operating systems may require additional libraries. For example, SunOS 5.X requires '-lresolv -lsocket -lnsl'. Depending on your OS you may need a library instead of the option -pthread, e.g., -lpthread. Filters must be thread-safe! Many operating systems now provide support for POSIX threads in the standard C libraries. The compiler flag to link with threading support differs according to the compiler and linker used. Check the Makefile in your appropriate obj.*/libmilter build subdirectory if you are unsure of the local flag used. +----------------------------------------+ | SPECIFYING FILTERS IN SENDMAIL CONFIGS | +----------------------------------------+ Filters are specified with a key letter ``X'' (for ``eXternal''). For example: Xfilter1, S=local:/var/run/f1.sock, F=R Xfilter2, S=inet6:999@localhost, F=T, T=S:1s;R:1s;E:5m Xfilter3, S=inet:3333@localhost specifies three filters. Filters can be specified in your .mc file using the following: INPUT_MAIL_FILTER(`filter1', `S=local:/var/run/f1.sock, F=R') INPUT_MAIL_FILTER(`filter2', `S=inet6:999@localhost, F=T, T=S:1s;R:1s;E:5m') INPUT_MAIL_FILTER(`filter3', `S=inet:3333@localhost') The first attaches to a Unix-domain socket in the /var/run directory; the second uses an IPv6 socket on port 999 of localhost, and the third uses an IPv4 socket on port 3333 of localhost. The current flags (F=) are: R Reject connection if filter unavailable T Temporary fail connection if filter unavailable Finally, you can override the default timeouts used by sendmail when talking to the filters using the T= equate. There are three fields inside of the T= equate: Letter Meaning S Timeout for sending information from the MTA to a filter R Timeout for reading reply from the filter E Overall timeout between sending end-of-message to filter and waiting for the final acknowledgment Note the separator between each is a ';' as a ',' already separates equates and therefore can't separate timeouts. The default values (if not set in the config) are: T=S:10s;R:10s;E:5m where 's' is seconds and 'm' is minutes. Actual sequencing is handled by the InputMailFilters option which is set automatically according to the order of the INPUT_MAIL_FILTER commands in your .mc file. Alternatively, you can reset its value by setting confINPUT_MAIL_FILTERS in your .mc file. This options causes the three filters to be called in the same order they were specified. It allows for possible future filtering on output (although this is not intended for this release). Also note that a filter can be defined without adding it to the input filter list by using MAIL_FILTER() instead of INPUT_MAIL_FILTER() in your .mc file. To test sendmail with the sample filter, the following might be added (in the appropriate locations) to your .mc file: INPUT_MAIL_FILTER(`sample', `S=local:/var/run/f1.sock') +------------------+ | TESTING A FILTER | +------------------+ Once you have compiled a filter, modified your .mc file and restarted the sendmail process, you will want to test that the filter performs as intended. The sample filter takes one argument -p, which indicates the local port on which to create a listening socket for the filter. Maintaining consistency with the suggested options for sendmail.cf, this would be the UNIX domain socket located in /var/run/f1.sock. % ./sample -p local:/var/run/f1.sock If the sample filter returns immediately to a command line, there was either an error with your command or a problem creating the specified socket. Further logging can be captured through the syslogd daemon. Using the 'netstat -a' command can ensure that your filter process is listening on the appropriate local socket. Email messages must be injected via SMTP to be filtered. There are two simple means of doing this; either using the 'sendmail -bs' command, or by telnetting to port 25 of the machine configured for milter. Once connected via one of these options, the session can be continued through the use of standard SMTP commands. % sendmail -bs 220 test.sendmail.com ESMTP Sendmail 8.10.0.Beta8/8.10.0.Beta8; Mon, 6 Dec 1999 19:34:23 -0800 (PST) HELO localhost 250 test.sendmail.com Hello testy@localhost, pleased to meet you MAIL From: 250 2.1.0 ... Sender ok RCPT To: 250 2.1.5 ... Recipient ok DATA 354 Enter mail, end with "." on a line by itself From: testy@test.sendmail.com To: root@test.sendmail.com Subject: testing sample filter Sample body . 250 2.0.0 dB73Zxi25236 Message accepted for delivery QUIT 221 2.0.0 test.sendmail.com closing connection In the above example, the lines beginning with numbers are output by the mail server, and those without are your input. If everything is working properly, you will find a file in /tmp by the name of msg.XXXXXXXX (where the Xs represent any combination of letters and numbers). This file should contain the message body and headers from the test email entered above. If the sample filter did not log your test email, there are a number of methods to narrow down the source of the problem. Check your system logs written by syslogd and see if there are any pertinent lines. You may need to reconfigure syslogd to capture all relevant data. Additionally, the logging level of sendmail can be raised with the LogLevel option. See the sendmail(8) manual page for more information. +--------------------------+ | SOURCE FOR SAMPLE FILTER | +--------------------------+ /* A trivial filter that logs all email to a file. */ #include #include #include #include #include #include #include "libmilter/mfapi.h" typedef int bool; #ifndef FALSE # define FALSE 0 #endif /* ! FALSE*/ #ifndef TRUE # define TRUE 1 #endif /* ! TRUE*/ struct mlfiPriv { char *mlfi_fname; FILE *mlfi_fp; }; #define MLFIPRIV ((struct mlfiPriv *) smfi_getpriv(ctx)) extern sfsistat mlfi_cleanup(SMFICTX *, bool); sfsistat mlfi_envfrom(ctx, envfrom) SMFICTX *ctx; char **envfrom; { struct mlfiPriv *priv; int fd; /* allocate some private memory */ priv = malloc(sizeof *priv); if (priv == NULL) { /* can't accept this message right now */ return SMFIS_TEMPFAIL; } memset(priv, '\0', sizeof *priv); /* open a file to store this message */ priv->mlfi_fname = strdup("/tmp/msg.XXXXXXXX"); if (priv->mlfi_fname == NULL) { free(priv); return SMFIS_TEMPFAIL; } if ((fd = mkstemp(priv->mlfi_fname)) < 0 || (priv->mlfi_fp = fdopen(fd, "w+")) == NULL) { free(priv->mlfi_fname); free(priv); return SMFIS_TEMPFAIL; } /* save the private data */ smfi_setpriv(ctx, priv); /* continue processing */ return SMFIS_CONTINUE; } sfsistat mlfi_header(ctx, headerf, headerv) SMFICTX *ctx; char *headerf; char *headerv; { /* write the header to the log file */ fprintf(MLFIPRIV->mlfi_fp, "%s: %s\r\n", headerf, headerv); /* continue processing */ return SMFIS_CONTINUE; } sfsistat mlfi_eoh(ctx) SMFICTX *ctx; { /* output the blank line between the header and the body */ fprintf(MLFIPRIV->mlfi_fp, "\r\n"); /* continue processing */ return SMFIS_CONTINUE; } sfsistat mlfi_body(ctx, bodyp, bodylen) SMFICTX *ctx; u_char *bodyp; size_t bodylen; { /* output body block to log file */ if (fwrite(bodyp, bodylen, 1, MLFIPRIV->mlfi_fp) <= 0) { /* write failed */ (void) mlfi_cleanup(ctx, FALSE); return SMFIS_TEMPFAIL; } /* continue processing */ return SMFIS_CONTINUE; } sfsistat mlfi_eom(ctx) SMFICTX *ctx; { return mlfi_cleanup(ctx, TRUE); } sfsistat mlfi_close(ctx) SMFICTX *ctx; { return SMFIS_ACCEPT; } sfsistat mlfi_abort(ctx) SMFICTX *ctx; { return mlfi_cleanup(ctx, FALSE); } sfsistat mlfi_cleanup(ctx, ok) SMFICTX *ctx; bool ok; { sfsistat rstat = SMFIS_CONTINUE; struct mlfiPriv *priv = MLFIPRIV; char *p; char host[512]; char hbuf[1024]; if (priv == NULL) return rstat; /* close the archive file */ if (priv->mlfi_fp != NULL && fclose(priv->mlfi_fp) == EOF) { /* failed; we have to wait until later */ rstat = SMFIS_TEMPFAIL; (void) unlink(priv->mlfi_fname); } else if (ok) { /* add a header to the message announcing our presence */ if (gethostname(host, sizeof host) < 0) strlcpy(host, "localhost", sizeof host); p = strrchr(priv->mlfi_fname, '/'); if (p == NULL) p = priv->mlfi_fname; else p++; snprintf(hbuf, sizeof hbuf, "%s@%s", p, host); smfi_addheader(ctx, "X-Archived", hbuf); } else { /* message was aborted -- delete the archive file */ (void) unlink(priv->mlfi_fname); } /* release private memory */ free(priv->mlfi_fname); free(priv); smfi_setpriv(ctx, NULL); /* return status */ return rstat; } struct smfiDesc smfilter = { "SampleFilter", /* filter name */ SMFI_VERSION, /* version code -- do not change */ SMFIF_ADDHDRS, /* flags */ NULL, /* connection info filter */ NULL, /* SMTP HELO command filter */ mlfi_envfrom, /* envelope sender filter */ NULL, /* envelope recipient filter */ mlfi_header, /* header filter */ mlfi_eoh, /* end of header */ mlfi_body, /* body block filter */ mlfi_eom, /* end of message */ mlfi_abort, /* message aborted */ mlfi_close /* connection cleanup */ }; int main(argc, argv) int argc; char *argv[]; { int c; const char *args = "p:"; /* Process command line options */ while ((c = getopt(argc, argv, args)) != -1) { switch (c) { case 'p': if (optarg == NULL || *optarg == '\0') { (void) fprintf(stderr, "Illegal conn: %s\n", optarg); exit(EX_USAGE); } (void) smfi_setconn(optarg); break; } } if (smfi_register(smfilter) == MI_FAILURE) { fprintf(stderr, "smfi_register failed\n"); exit(EX_UNAVAILABLE); } return smfi_main(); } /* eof */ $Revision: 8.9.2.1.2.8 $, Last updated $Date: 2000/07/18 15:43:26 $