Hey, I recently received my DC-ROMA RISC-V AI PC, RISC-V Mainboard II for which I purchased the "Basic / Standard" which comes in the coolermaster case.

I am having difficulty with the board.

If I have the case fully assembled and plug in my USB type-c dock, no lights turn on and the power button does not do anything. No fans turn on.

If I remove the top of the case and plug in my USB type-c dock then two red lights turn on. If I press the power button then the fans spin up but I don't get any video output on my screen.

Hi Tom,

I understand your current situation. Regarding the power light not turning on with the assembled chassis, I suspect the issue might be related to the debug expansion card or the USB-C port not being properly connected to the motherboard. Try reseating the expansion card by removing and reinserting it firmly.

As for the blank screen, it’s likely that the display cable is attached to the wrong port. Connect it to the top-right corner of the motherboard instead. For reference, check step-by-step instructions in the manual here:
DC-ROMA RISC-V AI PC, RISC-V Mainboard II with Cooler Maste Case User Guide

Regards,
DC support team

I reseated the expansion cards firmly and I plugged the dock into port 1 from that manual (top-right corner) and neither issue was resolved. I still get no signs of life at all if the plastic top is attached to the case, and I get no video on my monitor if I remove the plastic top of the case.

Hi Tom,
Please try connecting it as I do in the attachment. I've tested this method and it boots up properly without issues.

The motherboard must pass our pre-shipment testing before leaving the factory, and ours passed all checks.
If the video still fails to display after retrying, I'd suggest reflashing the system image.

Regards,
DC support team

I connected it as you did in the attachment and reflashed the system image according to these instructions, but it did not fix either issue. I recorded videos:

When the plastic lid is on, the board shows no life at all. No lights or anything: https://fizz.buzz/riscv/closed_case_no_lights_at_all.webm

When I remove the plastic lid, the flashing red lights start, but they never turn white and no video appears on my screen: https://fizz.buzz/riscv/open_case_no_video_no_white_lights.webm

And just for completeness, here is another computer plugged in to the HDMI to show that the monitor works: https://fizz.buzz/riscv/other_computer_working_hdmi.webm

Okay, fine.

I watched the video you sent, and it is indeed as you described. I saw that after you removed the outer shell, it could start up normally but there was no video display. I still want to confirm whether the monitor's input signal is set to HDMI when connected. Some monitors include both HDMI and analog signals. Since our motherboard only supports HDMI, some screens may not be compatible.

Additionally, after you reassembled the outer shell, pressing the power button had no response. This is because the screws were not fastened properly, which can cause the power button on the case and the motherboard's power switch to become misaligned, preventing normal startup.

Please double-check the two situations mentioned above. If you still have issues, feel free to contact us again.

DC support team

The monitor was on HDMI and the board behaves the same with or without the screws. I've uploaded two more videos demonstrating that:

The case closed, with screws inserted, selecting the HDMI input: still no signs of life at all. No lights, no fans, nothing: https://fizz.buzz/riscv/hdmi_selected_screws_inserted_no_signs_of_life.webm

The case open, selecting HDMI input: the lights flash red, but never turn white. The fan spins up, but no video is sent to the monitor: https://fizz.buzz/riscv/hdmi_selected_open_case_still_no_output.webm

Hey Tom,

Preliminary diagnosis suggests potential hardware failure. Please connect the mainboard to a serial port and capture the boot log for analysis.

Procedure for Capturing Boot Logs:

  1. Connect the serial cable to the USB-C port located at the bottom-right corner of the mainboard.
  2. Launch serial debugging software and configure log-saving settings.
  3. Power on the mainboard – boot diagnostics will automatically transmit over the serial connection.

Best regards,
DC support team

The log is attached

gpio init!
usb pweren
pll config ok
die_num:2,die_ordinal:0
Firmware version:1.25;disable ECC
Display version:1.0
boot start temperature:42.456C
DDR type:LPDDR5_D2D_X8;Size:32GB,Data Rate:6400MT/s
Failed to read EDID, using default 2.2K panel
Panel: 2, hact=2256 vact=1504
DDR self test OK
D2D Firmware Version: 1.51 auto 0
d2d_pmix_init!
T: degree 42.456
d2d_pmix_need_sweep: cur_degree: 42.456 min_degree: 34.980 fitted_min_degree: 24.000
d2d_pmix_need_sweep: sweep_full_smooth: 0
d2d_pmix_need_sweep: sweep_full_smooth: 0
d2d_pmix_need_sweep: sweep_full: 0
d2d_pmix_need_sweep: sweep_full: 0
d2d_pmix_need_sweep: sweep_incr: 0
d2d_pmix_need_sweep: sweep_incr: 0
======== d2d start        0ms        0ms ========
fan_set_pwm: Auto-invert PWM!
======== d2d init        7ms        7ms ========
T: degree 42.686
[Thermal] Cur: 42.686 Target: 24.500 Heat: 50.000 Cool: 60.000
[Thermal] Cur <= Heat, FAN[off] NPU[off]
fan_set_pwm: Auto-invert PWM!
d2d_init: retry cnt 0
d2d_init: Deassert [default subsys] rst 0x80
d2d_init: Aclk full speed
d2d_init: Deassert [prst|cfg] rst
configure_serdes_mode: Interlaken clock from AXI
d2d_init: Serdes features: rtrim[0xf], term[0x6], eq[0x50]
d2d_init: Deassert [raw_pcs|axi] rst
d2d_init: Deassert [tx] rst
d2d_serdes_cpu_run_and_sync: Serdes CPU run success! Both dies confirmed
d2d_pipe_check_and_sync: Pipe TX ready success! Both dies confirmed
d2d_init: Deassert [core] rst
d2d_phy_check_and_sync: PHY status ready success! Both dies confirmed
d2d_spare_tx_fw_adaptation_and_sync: Starting spare TX FW adaptation
d2d_spare_tx_fw_adaptation_and_sync: TX FW adaptation success! Both dies completed
d2d_init: Deassert [rx] rst
d2d_lock_and_sync: Dual die lock success! Local and remote confirmed
d2d_pmix_fix 381, cur_temp 0x150(43.602), pmix data updated
d2d_spare_rx_fw_adaptation_and_sync: Starting spare RX FW adaptation
d2d_spare_rx_fw_adaptation_and_sync: RX FW adaptation success! Both dies completed
d2d_ber_test_and_sync: Local BER test: PASS (total errors: 0x0)
d2d_ber_test_and_sync: Dual die BER test success!
d2d_init: wait for D2D interrupt about RX LOCAL LINKUP INT==1
fan_set_pwm: Auto-invert PWM!
[Thermal] exiting... FAN[on] NPU[off]
======== d2d end     2022ms     2029ms ========
d2d_init: D2D link success, High speed mode!

[35mmbox lpcpu <- u84: [0m[35m0x[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35m (GENERIC_NOTIFY)
[0m[35mLPCPU Firmware Version: 2.33
[0mPMIX data auto load successfully, current T 44.59, pmix low T 36.874, fan polarity 1!
[35md2d_pmix_fix 298, cur_temp 0x152(44.59)
[0m[35md2d_pmix_fix 298, cur_temp 0x154(44.514)
[0m[35md2d_pmix_fix 298, cur_temp 0x151(43.830)
[0m[35md2d_pmix_fix 298, cur_temp 0x151(43.830)
[0m[35md2d_pmix_fix 298, cur_temp 0x14f(43.374)
[0m
OpenSBI v1.3
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|___/_____|
        | |
        |_|

Platform Name             : ESWIN EIC770X
Platform Features         : none
Platform HART Count       : 8
Platform IPI Device       : aclint-mswi
Platform Timer Device     : aclint-mtimer @ 1000000Hz
Platform Console Device   : uart8250
Platform HSM Device       : ---
Platform PMU Device       : ---
Platform Reboot Device    : eswin_eic770x_reset
Platform Shutdown Device  : eswin_eic770x_reset
Platform Suspend Device   : eswin_eic770x_suspend
Platform CPPC Device      : ---
Firmware Base             : 0x80000000
Firmware Size             : 384 KB
Firmware RW Offset        : 0x40000
Firmware RW Size          : 128 KB
Firmware Heap Offset      : 0x54000
Firmware Heap Size        : 48 KB (total), 3 KB (reserved), 9 KB (used), 36 KB (free)
Firmware Scratch Size     : 4096 B (total), 736 B (used), 3360 B (free)
Runtime SBI Version       : 1.0

Domain0 Name              : root
Domain0 Boot HART         : 0
Domain0 HARTs             : 0*,1*,2*,3*,4*,5*,6*,7*
Domain0 Region00          : 0x0000000002000000-0x000000000200ffff (prot_out 0x18)M: (I,R,W) S/U: ()
Domain0 Region01          : 0x0000000022000000-0x000000002200ffff (prot_out 0x18)M: (I,R,W) S/U: ()
Domain0 Region02          : 0x0000000080000000-0x000000008007ffff (prot_out 0x18)M: (R,X) S/U: ()
Domain0 Region03          : 0x0000000040000000-0x000000007fffffff (prot_out 0x9b)M: (R,W) S/U: (R,W)
Domain0 Region04          : 0x0000000000000000-0x0000000fffffffff (prot_out 0x1f)M: () S/U: (R,W,X)
Domain0 Region05          : 0x0000002000000000-0x0000002fffffffff (prot_out 0x1f)M: () S/U: (R,W,X)
Domain0 Region06          : 0x0000008000000000-0x000000ffffffffff (prot_out 0x9b)M: (R,W) S/U: (R,W)
Domain0 Region07          : 0x0000000000000000-0x000003ffffffffff (prot_out 0x98)M: (I) S/U: ()
Domain0 Next Address      : 0x0000000080200000
Domain0 Next Arg1         : 0x00000000f8000000
Domain0 Next Mode         : S-mode
Domain0 SysReset          : yes
Domain0 SysSuspend        : yes

Boot HART ID              : 0
Boot HART Domain          : root
Boot HART Priv Version    : v1.11
Boot HART Base ISA        : rv64imafdchx
Boot HART ISA Extensions  : none
Boot HART PMP Count       : 8
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 39
Boot HART MHPM Count      : 4
Boot HART MIDELEG         : 0x0000000000000666
Boot HART MEDELEG         : 0x0000000000f00509

Hardware Feature[7C1]: 0x4000
Hardware Feature[7C2]: 0x80
Hardware Feature[7C3]: 0x104095c1be241
Hardware Feature[7C4]: 0x1d3ff


U-Boot 2024.01 (Oct 17 2025 - 01:55:41 +0000)

CPU:   rv64imafdc_zba_zbb
Model: Deepcomputing FML13V03
DRAM:  32 GiB (effective 64 GiB)
Core:  204 devices, 32 uclasses, devicetree: board
Warning: Device tree includes old 'u-boot,dm-' tags: please fix by 2023.07!
MMC:   sdhci@50450000: 0, sd@50460000: 1
Loading Environment from SPIFlash... drivers/spi/es_spi.c:775-   es_spi_of_to_plat() es_spi spi@51800000: max-frequency=4800000
SF: Detected w25q128fw with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

PCIE-0: Link up (Gen3-x4, Bus0)
[VO][INFO] display_init:480 Die[0] Eswin UBOOT DRM driver version: v1.0.1
[VO][INFO] display_init:518 no display connected!
[VO][INFO] display_init:480 Die[0] Eswin UBOOT DRM driver version: v1.0.1
[VO][INFO] display_init:518 no display connected!
[VO][INFO] display_init:480 Die[0] Eswin UBOOT DRM driver version: v1.0.1
[VO][INFO] display_init:518 no display connected!
In:    serial,usbkbd
Out:   serial
Err:   vidconsole,serial
Model: Deepcomputing FML13V03
Success to initialize SPI flash at spi@51800000
Bootspi flash write protection enabled
drivers/spi/es_spi.c:775-   es_spi_of_to_plat() es_spi spi@71800000: max-frequency=4800000
SF: Detected w25q128fw with page size 256 Bytes, erase size 4 KiB, total 16 MiB
Success to initialize SPI flash at spi@71800000
Bootspi flash write protection enabled
[VO][INFO] display_init:480 Die[0] Eswin UBOOT DRM driver version: v1.0.1
[VO][INFO] display_init:518 no display connected!
[VO][INFO] display_init:480 Die[1] Eswin UBOOT DRM driver version: v1.0.1
[VO][INFO] display_init:539 Detailed mode clock 268500 kHz, flags[9]
    H: 2560 2608 2640 2720
    V: 1600 1603 1609 1646
bus_format: 100a
[VO][INFO] eswin_dc_init:175 src_width:1920, src_height:1080.
[VO][INFO] eswin_dc_init:176 layer:0 hdisplay:2560, htotal:2720, hsync_st:2608, hsync_end:2640
[VO][INFO] eswin_dc_init:178 vdisplay:1600, vtotal:1646, vsync_st:1603, vsync_end:1609
[VO][INFO] eswin_dc_init:183 need scaler.
[VO][INFO] dw_hdmi_setup:2024 dw_hdmi_setup DVI mode
Cpu volatge no need boost at 1.6 Ghz!
drivers/pinctrl/pinctrl-eic770x.c:1265- eswin_pinctrl_probe() eswin_pinctrl pinctrl@0x51600080: : base 0000000051600080,  183 groups, 183 funcs
Net:   net/eth-uclass.c:454-      eth_initialize() No ethernet found.
drivers/spi/designware_spi.c:260-   dw_spi_of_to_plat() dw_spi spi@50814000: max-frequency=4800000
Working FDT set to edcf9050
--------EEPROM INFO--------
Product full SN: FML13V03-2538-D0640000-00000028
starting USB...
Bus usb1@50490000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus d1_usb0@70480000: drivers/pinctrl/pinctrl-eic770x.c:1265- eswin_pinctrl_probe() eswin_pinctrl pinctrl@0x71600080: : base 0000000071600080,  183 groups, 183 funcs
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus d1_usb1@70490000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb1@50490000 for devices... Device NOT ready
   Request Sense returned 02 3A 00
5 USB Device(s) found
scanning bus d1_usb0@70480000 for devices... 1 USB Device(s) found
scanning bus d1_usb1@70490000 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
No SATA device found!
Hit any key to stop autoboot:  0
Checking for update.cfg on USB...
fs/fs.c:753-             do_load() Can't set block device
Checking for usbupdate.scr on USB...
fs/fs.c:753-             do_load() Can't set block device
No usbupdate.scr found on USB
7[r[999;999H[6n8drivers/mmc/mmc.c:2925-     mmc_get_op_cond() Card did not respond to voltage select! : -110
drivers/mmc/mmc.c:2925-     mmc_get_op_cond() Card did not respond to voltage select! : -110
[VO][INFO] display_init:480 Die[0] Eswin UBOOT DRM driver version: v1.0.1
[VO][INFO] display_init:518 no display connected!
drivers/mmc/mmc.c:2925-     mmc_get_op_cond() Card did not respond to voltage select! : -110
drivers/mmc/mmc.c:2925-     mmc_get_op_cond() Card did not respond to voltage select! : -110
** Booting bootflow 'nvme#0.blk#1.bootdev.part_1' with efi
cmd/bootefi.c:517-       efi_run_image() Booting /efi\boot\bootriscv64.efi
[1;131H      [ grub.cfg  7.11KiB  100%  0.21B/s ][1;1H[1;131H      [ grubenv  1.00KiB  100%  43.25B/s ][1;1H[?25lEFI stub: Booting Linux Kernel...
EFI stub: EFI_RNG_PROTOCOL unavailable
EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services...
[    0.000000] Linux version 6.6.92-eic7x-2025.07 (root@b67a2314ece6) (riscv64-unknown-linux-gnu-gcc () 13.2.0, GNU ld (GNU Binutils) 2.42) #2025.09.26.03.45+ SMP Fri Sep 26 03:53:01 UTC 2025
[    0.000000] Machine model: DeepComputing FML13V03
[    0.000000] SBI specification v1.0 detected
[    0.000000] SBI implementation ID=0x1 Version=0x10003
[    0.000000] SBI TIME extension detected
[    0.000000] SBI IPI extension detected
[    0.000000] SBI RFENCE extension detected
[    0.000000] SBI SRST extension detected
[    0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
[    0.000000] printk: bootconsole [sbi0] enabled
[    0.000000] efi: EFI v2.10 by Das U-Boot
[    0.000000] efi: RTPROP=0xe8cc8040 SMBIOS=0xe8cf5000 INITRD=0xe33b8040 MEMRESERVE=0xe33b7040
[    0.000000] Reserved memory: created CMA memory pool at 0x0000002260000000, size 512 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x0000002260000000..0x000000227fffffff (524288 KiB) map reusable linux,cma
[    0.000000] OF: reserved mem: 0x0000000059000000..0x00000000593fffff (4096 KiB) nomap non-reusable sprammemory@59000000
[    0.000000] OF: reserved mem: 0x0000000079000000..0x00000000793fffff (4096 KiB) nomap non-reusable sprammemory@79000000
[    0.000000] OF: reserved mem: 0x0000000080000000..0x000000008007ffff (512 KiB) nomap non-reusable mmode_resv0@80000000
[    0.000000] OF: reserved mem: 0x00000000dffe0000..0x00000000dfffffff (128 KiB) nomap non-reusable lpcpures@dffe0000
[    0.000000] OF: reserved mem: 0x00000000e0000000..0x00000000e1ffffff (32768 KiB) nomap non-reusable region@e0000000
[    0.000000] OF: reserved mem: 0x00000000fff00000..0x00000000ffffffff (1024 KiB) nomap non-reusable ramoops@fff00000
[    0.000000] OF: reserved mem: 0x00000001fe000000..0x00000001ffffffff (32768 KiB) nomap non-reusable g2d_8GB_boundary_reserved_4k
[    0.000000] OF: reserved mem: 0x00000002fffff000..0x00000002ffffffff (4 KiB) nomap non-reusable g2d_12GB_boundary_reserved_4k
[    0.000000] Reserved memory: created mmz_nid_0_part_0 eswin reserve memory at 0x0000000300000000, size 6144 MiB
[    0.000000] OF: reserved mem: initialized node mmz_nid_0_part_0, compatible id eswin-reserve-memory
[    0.000000] OF: reserved mem: 0x0000000300000000..0x000000047fffffff (6291456 KiB) nomap non-reusable mmz_nid_0_part_0
[    0.000000] OF: reserved mem: 0x0000002040000000..0x00000020403fffff (4096 KiB) nomap non-reusable nid_1_zero_device_simu@2040000000
[    0.000000] OF: reserved mem: 0x00000020e0000000..0x00000020e1ffffff (32768 KiB) nomap non-reusable region@20,e0000000
[    0.000000] OF: reserved mem: 0x00000020fffff000..0x00000020ffffffff (4 KiB) nomap non-reusable d1_g2d_4GB_boundary_reserved_4k
[    0.000000] OF: reserved mem: 0x00000021fe000000..0x00000021ffffffff (32768 KiB) nomap non-reusable d1_g2d_8GB_boundary_reserved_4k
[    0.000000] Reserved memory: created mmz_nid_1_part_0 eswin reserve memory at 0x0000002280000000, size 6144 MiB
[    0.000000] OF: reserved mem: initialized node mmz_nid_1_part_0, compatible id eswin-reserve-memory
[    0.000000] OF: reserved mem: 0x0000002280000000..0x00000023ffffffff (6291456 KiB) nomap non-reusable mmz_nid_1_part_0
[    0.000000] OF: NUMA: parsing numa-distance-map-v1
[    0.000000] NUMA: NODE_DATA [mem 0x87fffe1c0-0x87fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x27ffc8a1c0-0x27ffc8bfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000059000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000027ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000059000000-0x00000000593fffff]
[    0.000000]   node   1: [mem 0x0000000079000000-0x00000000793fffff]
[    0.000000]   node   0: [mem 0x0000000080000000-0x000000008007ffff]
[    0.000000]   node   0: [mem 0x0000000080080000-0x00000000dffdffff]
[    0.000000]   node   0: [mem 0x00000000dffe0000-0x00000000e1ffffff]
[    0.000000]   node   0: [mem 0x00000000e2000000-0x00000000e8cc7fff]
[    0.000000]   node   0: [mem 0x00000000e8cc8000-0x00000000e8cc8fff]
[    0.000000]   node   0: [mem 0x00000000e8cc9000-0x00000000e8cc9fff]
[    0.000000]   node   0: [mem 0x00000000e8cca000-0x00000000e8ccbfff]
[    0.000000]   node   0: [mem 0x00000000e8ccc000-0x00000000e8cccfff]
[    0.000000]   node   0: [mem 0x00000000e8ccd000-0x00000000e8cecfff]
[    0.000000]   node   0: [mem 0x00000000e8ced000-0x00000000e8cf4fff]
[    0.000000]   node   0: [mem 0x00000000e8cf5000-0x00000000e8cf5fff]
[    0.000000]   node   0: [mem 0x00000000e8cf6000-0x00000000fdd84fff]
[    0.000000]   node   0: [mem 0x00000000fdd85000-0x00000000fdd85fff]
[    0.000000]   node   0: [mem 0x00000000fdd86000-0x00000000ffefffff]
[    0.000000]   node   0: [mem 0x00000000fff00000-0x00000000ffffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001fdffffff]
[    0.000000]   node   0: [mem 0x00000001fe000000-0x00000001ffffffff]
[    0.000000]   node   0: [mem 0x0000000200000000-0x00000002ffffefff]
[    0.000000]   node   0: [mem 0x00000002fffff000-0x000000047fffffff]
[    0.000000]   node   0: [mem 0x0000000480000000-0x000000087fffffff]
[    0.000000]   node   1: [mem 0x0000002000000000-0x000000203fffffff]
[    0.000000]   node   1: [mem 0x0000002040000000-0x00000020403fffff]
[    0.000000]   node   1: [mem 0x0000002040400000-0x00000020dfffffff]
[    0.000000]   node   1: [mem 0x00000020e0000000-0x00000020e1ffffff]
[    0.000000]   node   1: [mem 0x00000020e2000000-0x00000020ffffefff]
[    0.000000]   node   1: [mem 0x00000020fffff000-0x00000020ffffffff]
[    0.000000]   node   1: [mem 0x0000002100000000-0x00000021fdffffff]
[    0.000000]   node   1: [mem 0x00000021fe000000-0x00000021ffffffff]
[    0.000000]   node   1: [mem 0x0000002200000000-0x000000227fffffff]
[    0.000000]   node   1: [mem 0x0000002280000000-0x00000023ffffffff]
[    0.000000]   node   1: [mem 0x0000002400000000-0x00000027ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000059000000-0x000000087fffffff]
[    0.000000] Initmem setup node 1 [mem 0x0000000079000000-0x00000027ffffffff]
[    0.000000] On node 0, zone DMA32: 4096 pages in unavailable ranges
[    0.000000] On node 1, zone DMA32: 31744 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 27648 pages in unavailable ranges
[    0.000000] cma: Reserved 512 MiB at 0x0000000100000000 on node 0
[    0.000000] cma: Reserved 512 MiB at 0x0000002000000000 on node 1
[    0.000000] SBI HSM extension detected
[    0.000000] Falling back to deprecated "riscv,isa"
[    0.000000] riscv: base ISA extensions acdfhim
[    0.000000] riscv: ELF capabilities acdfim
[    0.000000] percpu: Embedded 50 pages/cpu s81528 r8192 d115080 u204800
[    0.000000] pcpu-alloc: s81528 r8192 d115080 u204800 alloc=50*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [1] 4 [1] 5 [1] 6 [1] 7
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6.92-eic7x-2025.07 root=UUID=5d06e2e5-c490-4e08-808c-aae07656b13c ro quiet splash console=tty0 console=ttys0,115200n8 earlycon=sbi console=ttyS0,115200n8 clk_ignore_unused cma_pernuma=0x20000000 disable_bypass=false no_console_suspend firmware_class.path=/lib/firmware/eic7x/
[    0.000000] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.6.92-eic7x-2025.07 disable_bypass=false", will be passed to user space.
[    0.000000] Fallback order for Node 0: 0 1
[    0.000000] Fallback order for Node 1: 1 0
[    0.000000] Built 2 zonelists, mobility grouping on.  Total pages: 16517088
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Virtual kernel memory layout:
[    0.000000]       fixmap : 0xffff8d7ffea00000 - 0xffff8d7fff000000   (6144 kB)
[    0.000000]       pci io : 0xffff8d7fff000000 - 0xffff8d8000000000   (  16 MB)
[    0.000000]      vmemmap : 0xffff8d8000000000 - 0xffff8f8000000000   (2048 GB)
[    0.000000]      vmalloc : 0xffff8f8000000000 - 0xffffaf8000000000   (  32 TB)
[    0.000000]      modules : 0xffffffff02ad9000 - 0xffffffff80000000   (2005 MB)
[    0.000000]       lowmem : 0xffffaf8000000000 - 0xffffafa7a7000000   ( 158 GB)
[    0.000000]       kernel : 0xffffffff80000000 - 0xffffffffffffffff   (2047 MB)
[    0.000000] Memory: 51672520K/67117056K available (17033K kernel code, 8156K rwdata, 8192K rodata, 7540K init, 1551K bss, 13871672K reserved, 1572864K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=2
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU debug extended QS entry/exit.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] riscv-intc: 64 local interrupts mapped
[    0.000000] plic: interrupt-controller@c000000: mapped 520 interrupts with 4 handlers for 8 contexts.
[    0.000000] plic: interrupt-controller@2c000000: mapped 520 interrupts with 4 handlers for 8 contexts.
[    0.000000] riscv: providing IPIs using SBI IPI extension
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
[    0.000002] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns
[    0.014191] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.024599] Console: colour dummy device 80x25
[    0.028974] printk: console [tty0] enabled
[    0.035331] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.046516] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000)
[    0.056576] pid_max: default: 32768 minimum: 301
[    0.063464] LSM: initializing lsm=capability,apparmor,integrity
[    0.070201] AppArmor: AppArmor initialized
[    0.138128] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc hugepage)
[    0.178935] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc hugepage)
[    0.189225] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
[    0.198133] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
[    0.218254] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.227578] riscv: ELF compat mode unsupported
[    0.227591] ASID allocator disabled (0 bits)
[    0.236495] rcu: Hierarchical SRCU implementation.
[    0.241224] rcu: 	Max phase no-delay instances is 1000.
[    0.248172] win2030_tbu_powr_priv_init finished!
[    0.253214] win2030_tbu_powr_priv_init finished!
[    0.258104] Remapping and enabling EFI services.
[    0.264123] smp: Bringing up secondary CPUs ...
[    0.292656] cpu1: Ratio of byte access time to unaligned word access is 0.00, unaligned accesses are slow
[    0.328731] cpu2: Ratio of byte access time to unaligned word access is 0.00, unaligned accesses are slow
[    0.364818] cpu3: Ratio of byte access time to unaligned word access is 0.00, unaligned accesses are slow
[    0.400964] cpu4: Ratio of byte access time to unaligned word access is 0.00, unaligned accesses are slow
[    0.437143] cpu5: Ratio of byte access time to unaligned word access is 0.00, unaligned accesses are slow
[    0.473337] cpu6: Ratio of byte access time to unaligned word access is 0.00, unaligned accesses are slow
[    0.509500] cpu7: Ratio of byte access time to unaligned word access is 0.00, unaligned accesses are slow
[    0.519886] smp: Brought up 2 nodes, 8 CPUs
[    0.537185] devtmpfs: initialized
[    0.606209] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.616013] futex hash table entries: 2048 (order: 5, 131072 bytes, vmalloc)
[    1.002486] pinctrl core: initialized pinctrl subsystem
[    1.015640] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    1.023130] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    1.030508] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    1.038641] audit: initializing netlink subsys (disabled)
[    1.044523] audit: type=2000 audit(0.920:1): state=initialized audit_enabled=0 res=1
[    1.045442] thermal_sys: Registered thermal governor 'fair_share'
[    1.052244] thermal_sys: Registered thermal governor 'bang_bang'
[    1.058360] thermal_sys: Registered thermal governor 'step_wise'
[    1.064407] thermal_sys: Registered thermal governor 'user_space'
[    1.070467] thermal_sys: Registered thermal governor 'power_allocator'
[    1.076718] cpuidle: using governor menu
[    1.111298] cpu0: Ratio of byte access time to unaligned word access is 0.00, unaligned accesses are slow
[    1.122034] SBI SUSP extension detected
[    1.180236] /soc/i2c@50950000/es8326@19: Fixed dependency cycle(s) with /soc/i2s1@50210000
[    1.191038] /soc/i2s0@50200000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
[    1.198541] /soc/i2s1@50210000: Fixed dependency cycle(s) with /soc/i2c@50950000/es8326@19
[    1.206872] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/es_wb@0
[    1.214762] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
[    1.223267] /soc/es_wb@0: Fixed dependency cycle(s) with /soc/display_control@502c0000
[    1.231231] /soc/hdmi@502a0000: Fixed dependency cycle(s) with /soc/i2s0@50200000
[    1.238713] /soc/hdmi@502a0000: Fixed dependency cycle(s) with /soc/display_control@502c0000
[    1.251323] /soc/i2s0@70200000: Fixed dependency cycle(s) with /soc/hdmi@702a0000
[    1.259273] /soc/display_control@702c0000: Fixed dependency cycle(s) with /soc/es_wb@1
[    1.267173] /soc/display_control@702c0000: Fixed dependency cycle(s) with /soc/hdmi@702a0000
[    1.275685] /soc/es_wb@1: Fixed dependency cycle(s) with /soc/display_control@702c0000
[    1.283636] /soc/hdmi@702a0000: Fixed dependency cycle(s) with /soc/i2s0@70200000
[    1.291127] /soc/hdmi@702a0000: Fixed dependency cycle(s) with /soc/display_control@702c0000
[    1.305719] eswin-reset 51828000.sys-crg:reset-controller: device is not dma coherent
[    1.313523] eswin-reset 51828000.sys-crg:reset-controller: device is not behind an iommu
[    1.403788] /soc/i2c@50950000/es8326@19: Fixed dependency cycle(s) with /soc/i2s1@50210000
[    1.417001] eswin-pinctrl 51600080.pinctrl: device is not dma coherent
[    1.423506] eswin-pinctrl 51600080.pinctrl: device is not behind an iommu
[    1.431099] eswin-pinctrl 51600080.pinctrl: eswin pinctrl initialized
[    1.443070] /soc/i2s0@50200000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
[    1.451144] /soc/i2c@50950000/es8326@19: Fixed dependency cycle(s) with /soc/i2s1@50210000
[    1.459715] /soc/i2s1@50210000: Fixed dependency cycle(s) with /soc/i2c@50950000/es8326@19
[    1.469071] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/es_wb@0
[    1.476977] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
[    1.485915] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/es_wb@0
[    1.493915] /soc/es_wb@0: Fixed dependency cycle(s) with /soc/display_control@502c0000
[    1.502215] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
[    1.510739] /soc/i2s0@50200000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
[    1.518272] /soc/hdmi@502a0000: Fixed dependency cycle(s) with /soc/i2s0@50200000
[    1.525849] /soc/hdmi@502a0000: Fixed dependency cycle(s) with /soc/display_control@502c0000
[    1.539183] eswin-reset 71828000.sys-crg:reset-controller: device is not dma coherent
[    1.546981] eswin-reset 71828000.sys-crg:reset-controller: device is not behind an iommu
[    1.628958] eswin-pinctrl 71600080.pinctrl: device is not dma coherent
[    1.635528] eswin-pinctrl 71600080.pinctrl: device is not behind an iommu
[    1.642990] eswin-pinctrl 71600080.pinctrl: eswin pinctrl initialized
[    1.653151] /soc/i2s0@70200000: Fixed dependency cycle(s) with /soc/hdmi@702a0000
[    1.665851] /soc/display_control@702c0000: Fixed dependency cycle(s) with /soc/es_wb@1
[    1.673838] /soc/display_control@702c0000: Fixed dependency cycle(s) with /soc/hdmi@702a0000
[    1.682671] /soc/display_control@702c0000: Fixed dependency cycle(s) with /soc/es_wb@1
[    1.690672] /soc/es_wb@1: Fixed dependency cycle(s) with /soc/display_control@702c0000
[    1.698909] /soc/display_control@702c0000: Fixed dependency cycle(s) with /soc/hdmi@702a0000
[    1.707438] /soc/i2s0@70200000: Fixed dependency cycle(s) with /soc/hdmi@702a0000
[    1.715031] /soc/hdmi@702a0000: Fixed dependency cycle(s) with /soc/i2s0@70200000
[    1.722585] /soc/hdmi@702a0000: Fixed dependency cycle(s) with /soc/display_control@702c0000
[    1.747327] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    1.754115] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    1.760744] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    1.767571] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    1.784000] reg-fixed-voltage regulator-dummy: device is dma coherent
[    1.784448] iommu: Default domain type: Translated
[    1.790042] reg-fixed-voltage regulator-backlight: device is dma coherent
[    1.790061] reg-fixed-voltage regulator-backlight: device is not behind an iommu
[    1.790568] reg-fixed-voltage regulator-dummy: device is not behind an iommu
[    1.795267] iommu: DMA domain TLB invalidation policy: strict mode
[    1.796343] SCSI subsystem initialized
[    1.827456] libata version 3.00 loaded.
[    1.831794] usbcore: registered new interface driver usbfs
[    1.837384] usbcore: registered new interface driver hub
[    1.842848] usbcore: registered new device driver usb
[    1.849646] mc: Linux media interface: v0.10
[    1.854015] videodev: Linux video capture interface: v2.00
[    1.859713] pps_core: LinuxPPS API ver. 1 registered
[    1.864667] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    1.874793] EDAC MC: Ver: 3.0.0
[    1.882004] efivars: Registered efivars operations
[    2.939286] eswin-noc-wdt 51810000.scu_sys_con:noc@51810324: device is not dma coherent
[    2.947284] eswin-noc-wdt 51810000.scu_sys_con:noc@51810324: device is not behind an iommu
[    2.961216] Advanced Linux Sound Architecture Driver Initialized.
[    2.968824] NetLabel: Initializing
[    2.972201] NetLabel:  domain hash size = 128
[    2.976613] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    2.982403] NetLabel:  unlabeled traffic allowed by default
[    2.988443] mctp: management component transport protocol core
[    2.994347] NET: Registered PF_MCTP protocol family
[    2.999569] vgaarb: loaded
[    3.003394] clocksource: Switched to clocksource riscv_clocksource
[    3.012983] VFS: Disk quotas dquot_6.6.0
[    3.017171] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.024485] FS-Cache: Loaded
[    3.028232] AppArmor: AppArmor Filesystem Enabled
[    3.052894] NET: Registered PF_INET protocol family
[    3.060251] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
[    3.080735] tcp_listen_portaddr_hash hash table entries: 32768 (order: 8, 1048576 bytes, vmalloc)
[    3.090577] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, vmalloc)
[    3.098699] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc hugepage)
[    3.112204] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, vmalloc hugepage)
[    3.122914] TCP: Hash tables configured (established 524288 bind 65536)
[    3.133432] MPTCP token hash table entries: 65536 (order: 9, 3145728 bytes, vmalloc)
[    3.144221] UDP hash table entries: 32768 (order: 9, 3145728 bytes, vmalloc)
[    3.154981] UDP-Lite hash table entries: 32768 (order: 9, 3145728 bytes, vmalloc)
[    3.166262] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    3.173380] RPC: Registered named UNIX socket transport module.
[    3.179274] RPC: Registered udp transport module.
[    3.184002] RPC: Registered tcp transport module.
[    3.188749] RPC: Registered tcp-with-tls transport module.
[    3.194283] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.201844] NET: Registered PF_XDP protocol family
[    3.206628] PCI: CLS 0 bytes, default 64
[    3.211667] Trying to unpack rootfs image as initramfs...
[    3.213826] Initialise system trusted keyrings
[    3.222382] workingset: timestamp_bits=45 max_order=24 bucket_order=0
[    3.228993] zbud: loaded
[    3.247115] NFS: Registering the id_resolver key type
[    3.252231] Key type id_resolver registered
[    3.256385] Key type id_legacy registered
[    3.260604] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.267279] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    3.314601] Key type asymmetric registered
[    3.318689] Asymmetric key parser 'x509' registered
[    3.323825] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    3.331798] io scheduler mq-deadline registered
[    3.336307] io scheduler kyber registered
[    3.340695] io scheduler bfq registered
[    3.353015] simple-pm-bus soc: device is not dma coherent
[    3.358418] simple-pm-bus soc: device is not behind an iommu
[    3.364316] simple-pm-bus soc:axi4-sys-port@40000000: device is not dma coherent
[    3.371721] simple-pm-bus soc:axi4-sys-port@40000000: device is not behind an iommu
[    3.379556] simple-pm-bus soc:axi4-sys-port@8000000000: device is not dma coherent
[    3.387112] simple-pm-bus soc:axi4-sys-port@8000000000: device is not behind an iommu
[    3.395174] simple-pm-bus soc:tl-address-adjuster@20000000: device is not dma coherent
[    3.403071] simple-pm-bus soc:tl-address-adjuster@20000000: device is not behind an iommu
[    3.411427] simple-pm-bus soc:tl-inter-mem-master-port@80000000: device is not dma coherent
[    3.419794] simple-pm-bus soc:tl-inter-mem-master-port@80000000: device is not behind an iommu
[    3.428521] simple-pm-bus 51810000.scu_sys_con: device is not dma coherent
[    3.435369] simple-pm-bus 51810000.scu_sys_con: device is not behind an iommu
[    3.442655] simple-pm-bus 51828000.sys-crg: device is not dma coherent
[    3.449164] simple-pm-bus 51828000.sys-crg: device is not behind an iommu
[    3.456185] simple-pm-bus soc:noc: device is not dma coherent
[    3.461950] simple-pm-bus soc:noc: device is not behind an iommu
[    3.468770] simple-pm-bus 71828000.sys-crg: device is not dma coherent
[    3.475274] simple-pm-bus 71828000.sys-crg: device is not behind an iommu
[    3.483359] gpio-dwapb 51600000.gpio: device is not dma coherent
[    3.489376] gpio-dwapb 51600000.gpio: device is not behind an iommu
[    3.504118] gpio-dwapb 71600000.gpio: device is not dma coherent
[    3.510108] gpio-dwapb 71600000.gpio: device is not behind an iommu
[    3.530390] eswin-clock 51828000.sys-crg:clock-controller: device is not dma coherent
[    3.538299] eswin-clock 51828000.sys-crg:clock-controller: device is not behind an iommu
[    3.602864] eswin-clock 51828000.sys-crg:clock-controller: CPU frequency set to 1400000000 Hz
[    3.612274] eswin-clock 71828000.sys-crg:clock-controller: device is not dma coherent
[    3.620074] eswin-clock 71828000.sys-crg:clock-controller: device is not behind an iommu
[    3.675093] Freeing initrd memory: 21512K
[    3.893081] eswin-clock 71828000.sys-crg:clock-controller: CPU frequency set to 1400000000 Hz
[    3.902720] dw_axi_dmac_platform 518c0000.dma-controller-aon: device is not dma coherent
[    3.910934] dw_axi_dmac_platform 50430000.dma-controller-hsp: device is not dma coherent
[    3.919750] dw_axi_dmac_platform 718c0000.dma-controller-aon: device is not dma coherent
[    3.927918] dw_axi_dmac_platform 70430000.dma-controller-hsp: device is not dma coherent
[    3.937420] CCACHE: zero_device resource: start 0x1a000000, size 0x400000
[    3.944260] CCACHE: 4 banks, 16 ways, sets/bank=1024, bytes/block=64
[    3.950540] CCACHE: Node 0, index of the largest way enabled: 15
[    3.959903] CCACHE: zero_device nid_1_zero_device_simu@2040000000: base 0x2040000000, size 0x400000
[    3.968903] CCACHE: 4 banks, 16 ways, sets/bank=1024, bytes/block=64
[    3.975275] CCACHE: Node 1, index of the largest way enabled: 15
[    3.981312] debugfs: Directory 'sifive_ccache_cache' with parent '/' already present!
[    3.991424] eswin-dsp-subsys 52280400.dsp_subsys: device is not dma coherent
[    3.998379] eswin-dsp-subsys 52280400.dsp_subsys: device is not behind an iommu
[    4.005745] eswin-dsp-subsys 52280400.dsp_subsys: es_dsp_subsys_probe
[    4.012390] debugfs: Directory '52280400.dsp_subsys' with parent 'regmap' already present!
[    4.022347] eswin-dsp-subsys 72280400.dsp_subsys: device is not dma coherent
[    4.029330] eswin-dsp-subsys 72280400.dsp_subsys: device is not behind an iommu
[    4.036692] eswin-dsp-subsys 72280400.dsp_subsys: es_dsp_subsys_probe
[    4.043297] debugfs: Directory '72280400.dsp_subsys' with parent 'regmap' already present!
[    4.052729] ESWIN OTP debugfs initialized
[    4.107538] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
[    4.116450] dw-apb-uart 50900000.serial: device is not dma coherent
[    4.122644] dw-apb-uart 50900000.serial: device is not behind an iommu
[    4.129479] dw-apb-uart 50900000.serial: Designware UART version
[    4.136225] printk: console [ttyS0] disabled
[    4.160890] 50900000.serial: ttyS0 at MMIO 0x50900000 (irq = 119, base_baud = 12500000) is a 16550A
[    4.170073] printk: console [ttyS0] enabled
[    4.170073] printk: console [ttyS0] enabled
[    4.178432] printk: bootconsole [sbi0] disabled
[    4.178432] printk: bootconsole [sbi0] disabled
[    4.191777] arm-smmu-v3 50c00000.iommu: device is not dma coherent
[    4.198162] arm-smmu-v3 50c00000.iommu: device is not behind an iommu
[    4.204989] arm-smmu-v3 50c00000.iommu: ias 42-bit, oas 42-bit (features 0x00081e8f)
[    4.215042] arm-smmu-v3 50c00000.iommu: allocated 65536 entries for cmdq
[    4.223690] arm-smmu-v3 50c00000.iommu: allocated 32768 entries for evtq
[    4.233503] arm-smmu-v3 50c00000.iommu: msi_domain absent - falling back to wired irqs
[    4.242867] arm-smmu-v3 70c00000.iommu: device is not dma coherent
[    4.249099] arm-smmu-v3 70c00000.iommu: device is not behind an iommu
[    4.256056] arm-smmu-v3 70c00000.iommu: ias 42-bit, oas 42-bit (features 0x00081e8f)
[    4.278625] arm-smmu-v3 70c00000.iommu: allocated 65536 entries for cmdq
[    4.299685] arm-smmu-v3 70c00000.iommu: allocated 32768 entries for evtq
[    4.321398] arm-smmu-v3 70c00000.iommu: msi_domain absent - falling back to wired irqs
[    4.332019] [drm] drm init enter
[    4.336029] es-dc 502c0000.display_control: device is not dma coherent
[    4.342583] es-dc 502c0000.display_control: device is not behind an iommu
[    4.350718] es-dc 702c0000.display_control: device is not dma coherent
[    4.357365] es-dc 702c0000.display_control: device is not behind an iommu
[    4.365665] dw-hdmi-eswin 502a0000.hdmi: device is not dma coherent
[    4.372030] dw-hdmi-eswin 502a0000.hdmi: device is not behind an iommu
[    4.379136] dw-hdmi-eswin 702a0000.hdmi: device is not dma coherent
[    4.385455] dw-hdmi-eswin 702a0000.hdmi: device is not behind an iommu
[    4.393028] es-virtual-display soc:es_wb@0: device is not dma coherent
[    4.399597] es-virtual-display soc:es_wb@0: device is not behind an iommu
[    4.406882] es-virtual-display soc:es_wb@1: device is not dma coherent
[    4.413457] es-virtual-display soc:es_wb@1: device is not behind an iommu
[    4.422782] pvrsrvkm 51400000.gpu: device is not dma coherent
[    4.428607] pvrsrvkm 51400000.gpu: device is not behind an iommu
[    4.435414] pvrsrvkm 51400000.gpu: EM: created perf domain
[    4.441101] esgpu 20250625 DeviceConfigCreate: gpu clk enable ok
[    4.447130] eswin print DeviceConfigCreate: gpu clk disable ok
[    4.452978] eswin print : set aclk to 800000000HZ
[    4.457787] eswin print : read back aclk  800000000HZ
[    4.462940] eswin print DeviceConfigCreate: gpu clk enable ok
[    4.469305] eswin print DeviceConfigCreate: gpu clk reset ok
[    4.475004] DeviceConfigCreate: --------------->dev_name=51400000.gpu
[    4.481493] DeviceConfigCreate: --------------->reg_base=51400000, reg_size=fffff
[    4.489052] DeviceConfigCreate: --------------->ui32IRQ=126
[    4.494750] PVR_K:  1: Read BVNC 30.3.408.101 from HW device registers
[    4.501304] PVR_K:  1: RGX Device registered with BVNC 30.3.408.101
[    4.508473] [drm] Initialized pvr 24.2.6643903 20170530 for 51400000.gpu on minor 0
[    4.521521] brd: module loaded
[    4.532608] loop: module loaded
[    4.539815] dw_spi_mmio 50814000.spi: device is not dma coherent
[    4.545864] dw_spi_mmio 50814000.spi: device is not behind an iommu
[    4.552428] dw_spi_mmio 50814000.spi: DMA init failed
[    4.558994] dw_spi_mmio 70810000.spi: device is not dma coherent
[    4.565051] dw_spi_mmio 70810000.spi: device is not behind an iommu
[    4.571669] dw_spi_mmio 70810000.spi: DMA init failed
[    4.577387] spi-nor spi1.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[    4.584589] spi-nor spi1.1: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[    4.592101] tun: Universal TUN/TAP device driver, 1.6
[    4.598765] PPP generic driver version 2.4.2
[    4.605382] eswin-dwc3 soc:usb0@50480000: device is not dma coherent
[    4.611814] eswin-dwc3 soc:usb0@50480000: device is not behind an iommu
[    4.618961] dwc3 50480000.dwc3: device is not dma coherent
[    4.624950] dwc3 50480000.dwc3: Adding to iommu group 0
[    4.630303] dwc3 50480000.dwc3: device is behind an iommu
[    4.636800] eswin-dwc3 soc:usb1@50490000: device is not dma coherent
[    4.643197] eswin-dwc3 soc:usb1@50490000: device is not behind an iommu
[    4.650166] dwc3 50490000.dwc3: device is not dma coherent
[    4.655726] dwc3 50490000.dwc3: Adding to iommu group 1
[    4.661048] dwc3 50490000.dwc3: device is behind an iommu
[    4.667744] eswin-dwc3 soc:usb0@70480000: device is not dma coherent
[    4.674126] eswin-dwc3 soc:usb0@70480000: device is not behind an iommu
[    4.681242] dwc3 70480000.dwc3: device is not dma coherent
[    4.687872] dwc3 70480000.dwc3: Adding to iommu group 2
[    4.693381] dwc3 70480000.dwc3: device is behind an iommu
[    4.700163] eswin-dwc3 soc:usb1@70490000: device is not dma coherent
[    4.706551] eswin-dwc3 soc:usb1@70490000: device is not behind an iommu
[    4.713563] dwc3 70490000.dwc3: device is not dma coherent
[    4.719126] dwc3 70490000.dwc3: Adding to iommu group 3
[    4.724575] dwc3 70490000.dwc3: device is behind an iommu
[    4.734793] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    4.740532] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    4.748918] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe45 hci version 0x110 quirks 0x0000008000000010
[    4.758362] xhci-hcd xhci-hcd.0.auto: irq 129, io mem 0x50480000
[    4.764503] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    4.770177] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    4.777890] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    4.784563] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    4.792857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.800092] usb usb1: Product: xHCI Host Controller
[    4.804978] usb usb1: Manufacturer: Linux 6.6.92-eic7x-2025.07 xhci-hcd
[    4.811603] usb usb1: SerialNumber: xhci-hcd.0.auto
[    4.816949] hub 1-0:1.0: USB hub found
[    4.820744] hub 1-0:1.0: 1 port detected
[    4.824986] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.833160] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    4.841444] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.848684] usb usb2: Product: xHCI Host Controller
[    4.853575] usb usb2: Manufacturer: Linux 6.6.92-eic7x-2025.07 xhci-hcd
[    4.860202] usb usb2: SerialNumber: xhci-hcd.0.auto
[    4.865626] hub 2-0:1.0: USB hub found
[    4.869469] hub 2-0:1.0: 1 port detected
[    4.873908] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    4.879644] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    4.888000] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe45 hci version 0x110 quirks 0x0000008000000010
[    4.897451] xhci-hcd xhci-hcd.1.auto: irq 130, io mem 0x50490000
[    4.903612] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    4.909277] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    4.916986] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    4.923729] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    4.932015] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.939249] usb usb3: Product: xHCI Host Controller
[    4.944135] usb usb3: Manufacturer: Linux 6.6.92-eic7x-2025.07 xhci-hcd
[    4.950758] usb usb3: SerialNumber: xhci-hcd.1.auto
[    4.956004] hub 3-0:1.0: USB hub found
[    4.959795] hub 3-0:1.0: 1 port detected
[    4.964015] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.972188] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    4.980475] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.987715] usb usb4: Product: xHCI Host Controller
[    4.992606] usb usb4: Manufacturer: Linux 6.6.92-eic7x-2025.07 xhci-hcd
[    4.999231] usb usb4: SerialNumber: xhci-hcd.1.auto
[    5.004587] hub 4-0:1.0: USB hub found
[    5.008384] hub 4-0:1.0: 1 port detected
[    5.012723] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    5.018411] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 5
[    5.027456] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe45 hci version 0x110 quirks 0x0000008000000010
[    5.036928] xhci-hcd xhci-hcd.2.auto: irq 131, io mem 0x70480000
[    5.043109] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    5.048782] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6
[    5.056482] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[    5.063135] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    5.071420] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.078656] usb usb5: Product: xHCI Host Controller
[    5.083544] usb usb5: Manufacturer: Linux 6.6.92-eic7x-2025.07 xhci-hcd
[    5.090168] usb usb5: SerialNumber: xhci-hcd.2.auto
[    5.095458] hub 5-0:1.0: USB hub found
[    5.099236] hub 5-0:1.0: 1 port detected
[    5.103509] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.111713] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    5.120001] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.127243] usb usb6: Product: xHCI Host Controller
[    5.132143] usb usb6: Manufacturer: Linux 6.6.92-eic7x-2025.07 xhci-hcd
[    5.138770] usb usb6: SerialNumber: xhci-hcd.2.auto
[    5.144161] hub 6-0:1.0: USB hub found
[    5.147958] hub 6-0:1.0: 1 port detected
[    5.152336] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    5.158027] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 7
[    5.166928] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe45 hci version 0x110 quirks 0x0000008000000010
[    5.176382] xhci-hcd xhci-hcd.3.auto: irq 132, io mem 0x70490000
[    5.182543] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    5.188390] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 8
[    5.196092] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[    5.202747] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    5.211041] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.218279] usb usb7: Product: xHCI Host Controller
[    5.223166] usb usb7: Manufacturer: Linux 6.6.92-eic7x-2025.07 xhci-hcd
[    5.229801] usb usb7: SerialNumber: xhci-hcd.3.auto
[    5.235097] hub 7-0:1.0: USB hub found
[    5.238891] hub 7-0:1.0: 1 port detected
[    5.239489] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    5.243119] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.257639] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    5.265923] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.273160] usb usb8: Product: xHCI Host Controller
[    5.278051] usb usb8: Manufacturer: Linux 6.6.92-eic7x-2025.07 xhci-hcd
[    5.284678] usb usb8: SerialNumber: xhci-hcd.3.auto
[    5.289986] hub 8-0:1.0: USB hub found
[    5.293779] hub 8-0:1.0: 1 port detected
[    5.298102] usbcore: registered new interface driver cdc_acm
[    5.303793] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    5.311881] usbcore: registered new interface driver cdc_wdm
[    5.317848] usbcore: registered new interface driver uas
[    5.323266] usbcore: registered new interface driver usb-storage
[    5.329414] usbcore: registered new interface driver usbserial_generic
[    5.336011] usbserial: USB Serial support registered for generic
[    5.342064] usbcore: registered new interface driver cp210x
[    5.347665] usbserial: USB Serial support registered for cp210x
[    5.353662] usbcore: registered new interface driver ftdi_sio
[    5.359441] usbserial: USB Serial support registered for FTDI USB Serial Device
[    5.366890] usbcore: registered new interface driver keyspan
[    5.372577] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    5.380432] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    5.387779] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    5.395209] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    5.403334] usbcore: registered new interface driver option
[    5.409027] usbserial: USB Serial support registered for GSM modem (1-port)
[    5.416107] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    5.416258] usbcore: registered new interface driver oti6858
[    5.424295] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.429976] usbserial: USB Serial support registered for oti6858
[    5.437094] usb 3-1: Product: USB 2.0 Hub
[    5.443168] usbcore: registered new interface driver pl2303
[    5.452757] usbserial: USB Serial support registered for pl2303
[    5.458734] usbcore: registered new interface driver qcserial
[    5.464524] usbserial: USB Serial support registered for Qualcomm USB modem
[    5.505798] hub 3-1:1.0: USB hub found
[    5.509742] hub 3-1:1.0: 4 ports detected
[    5.531389] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[    5.683843] usb 7-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    5.692039] usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.699185] usb 7-1: Product: USB 2.0 Hub
[    5.746802] hub 7-1:1.0: USB hub found
[    5.750698] hub 7-1:1.0: 4 ports detected
[    5.919380] usb 3-1.2: new full-speed USB device number 3 using xhci-hcd
[    6.144721] usb 3-1.2: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
[    6.153093] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.383385] usb 3-1.3: new high-speed USB device number 4 using xhci-hcd
[    6.588706] usb 3-1.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=61.90
[    6.597077] usb 3-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.604400] usb 3-1.3: Product: USB2.0 Hub
[    6.651669] hub 3-1.3:1.0: USB hub found
[    6.655905] hub 3-1.3:1.0: 4 ports detected
[    6.662162] usbcore: registered new interface driver usbtest
[    6.668373] mousedev: PS/2 mouse device common for all mice
[    6.674088] usbcore: registered new interface driver usbtouchscreen
[    6.681764] eswin-rtc 51818000.rtc: device is not dma coherent
[    6.687647] eswin-rtc 51818000.rtc: device is not behind an iommu
[    6.694044] ddr self refresh enabled, device 51818000.rtc support to be wakeup source
[    6.702280] eswin-rtc 51818000.rtc: registered as rtc0
[    6.707481] eswin-rtc 51818000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0)
[    6.715881] eswin-rtc 71818000.rtc: device is not dma coherent
[    6.721744] eswin-rtc 71818000.rtc: device is not behind an iommu
[    6.728083] eswin-rtc 71818000.rtc: Couldn't get the clock for RTC
[    6.734422] i2c_dev: i2c /dev entries driver
[    6.740311] eswin-vi 51000000.vi-subsys: device is not dma coherent
[    6.746610] eswin-vi 51000000.vi-subsys: device is not behind an iommu
[    6.754353] eswin-vi: Failed to read isp_dvp0_hor property! Use Default 3280!
[    6.761537] eswin-vi: Failed to read isp_dvp0_ver property! Use Default 2464!
[    6.768723] eswin-vi: Failed to read phy_mode property! Use Default 5!
[    6.959387] usb 3-1.3.4: new high-speed USB device number 5 using xhci-hcd
[    6.996791] eswin-vi 71000000.d1-vi-subsys: device is not dma coherent
[    7.003363] eswin-vi 71000000.d1-vi-subsys: device is not behind an iommu
[    7.011406] eswin-vi: Failed to read isp_dvp0_hor property! Use Default 3280!
[    7.018574] eswin-vi: Failed to read isp_dvp0_ver property! Use Default 2464!
[    7.025718] eswin-vi: Failed to read phy_mode property! Use Default 5!
[    7.064270] usb 3-1.3.4: New USB device found, idVendor=14cd, idProduct=1212, bcdDevice= 1.00
[    7.072811] usb 3-1.3.4: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[    7.080305] usb 3-1.3.4: Product: Mass Storage Device
[    7.085363] usb 3-1.3.4: Manufacturer: Generic
[    7.089814] usb 3-1.3.4: SerialNumber: 121220160204
[    7.095568] usb-storage 3-1.3.4:1.0: USB Mass Storage device detected
[    7.102603] scsi host0: usb-storage 3-1.3.4:1.0
[    7.256360] eswin-dummy-pvt 50b00000.pvt: device is not dma coherent
[    7.262750] eswin-dummy-pvt 50b00000.pvt: device is not behind an iommu
[    7.276857] eswin-dummy-pvt 70b00000.pvt: device is not dma coherent
[    7.283241] eswin-dummy-pvt 70b00000.pvt: device is not behind an iommu
[    7.297978] eswin-pvt 52360000.pvt: device is not dma coherent
[    7.303843] eswin-pvt 52360000.pvt: device is not behind an iommu
[    7.313969] hwmon hwmon2: temp1_input not attached to any thermal zone
[    7.320913] eswin-pvt 72360000.pvt: device is not dma coherent
[    7.326774] eswin-pvt 72360000.pvt: device is not behind an iommu
[    7.336909] hwmon hwmon3: temp1_input not attached to any thermal zone
[    7.344682] eswin-edac 52300000.ddr-controller: device is not dma coherent
[    7.351583] eswin-edac 52300000.ddr-controller: device is not behind an iommu
[    7.358940] EDAC MC: 52300000.ddr-controller init succ
[    7.364173] eswin-edac 52380000.ddr-controller: device is not dma coherent
[    7.371065] eswin-edac 52380000.ddr-controller: device is not behind an iommu
[    7.378446] EDAC MC: 52380000.ddr-controller init succ
[    7.383938] eswin-edac 72300000.ddr-controller: device is not dma coherent
[    7.390840] eswin-edac 72300000.ddr-controller: device is not behind an iommu
[    7.398160] EDAC MC: 72300000.ddr-controller init succ
[    7.403374] eswin-edac 72380000.ddr-controller: device is not dma coherent
[    7.410267] eswin-edac 72380000.ddr-controller: device is not behind an iommu
[    7.417600] EDAC MC: 72380000.ddr-controller init succ
[    7.423804] cpu cpu0: EM: created perf domain
[    7.428462] cluster0 change to high voltage, target rate 1800000000
[    7.441074] cpu cpu4: EM: created perf domain
[    7.445504] cluster1 change to high voltage, target rate 1800000000
[    7.458698] cpuidle-riscv-sbi: idle driver registered for all CPUs
[    7.466128] sdhci: Secure Digital Host Controller Interface driver
[    7.472322] sdhci: Copyright(c) Pierre Ossman
[    7.476712] sdhci-pltfm: SDHCI platform and OF driver helper
[    7.484123] ledtrig-cpu: registered to indicate activity on CPUs
[    7.496544] eswin-timer 51840000.timer: device is not dma coherent
[    7.502748] eswin-timer 51840000.timer: device is not behind an iommu
[    7.509213] eswin-timer 51840000.timer: eswin_timer_probe
[    7.515164] eswin-timer 51840000.timer: eswin_timer_probe success
[    7.521389] eswin-timer 51850000.timer: device is not dma coherent
[    7.527588] eswin-timer 51850000.timer: device is not behind an iommu
[    7.534061] eswin-timer 51850000.timer: eswin_timer_probe
[    7.539686] eswin-timer 51850000.timer: eswin_timer_probe success
[    7.545860] eswin-timer 51858000.timer: device is not dma coherent
[    7.552053] eswin-timer 51858000.timer: device is not behind an iommu
[    7.558539] eswin-timer 51858000.timer: eswin_timer_probe
[    7.564169] eswin-timer 51858000.timer: eswin_timer_probe success
[    7.570587] eswin-timer 71840000.timer: device is not dma coherent
[    7.576782] eswin-timer 71840000.timer: device is not behind an iommu
[    7.583257] eswin-timer 71840000.timer: eswin_timer_probe
[    7.589091] eswin-timer 71840000.timer: eswin_timer_probe success
[    7.595280] eswin-timer 71850000.timer: device is not dma coherent
[    7.601478] eswin-timer 71850000.timer: device is not behind an iommu
[    7.607953] eswin-timer 71850000.timer: eswin_timer_probe
[    7.613644] eswin-timer 71850000.timer: eswin_timer_probe success
[    7.619823] eswin-timer 71858000.timer: device is not dma coherent
[    7.626019] eswin-timer 71858000.timer: device is not behind an iommu
[    7.632509] eswin-timer 71858000.timer: eswin_timer_probe
[    7.638179] eswin-timer 71858000.timer: eswin_timer_probe success
[    7.644514] hid: raw HID events driver (C) Jiri Kosina
[    7.649834] usbcore: registered new interface driver usbhid
[    7.655422] usbhid: USB HID core driver
[    7.660909] es_dewarp_init: Entering
[    7.664989] es_dewarp_init: Exiting
[    7.668503] ESWV: es media driver ver: Major 509, Minor 0
[    7.674229] ESWV: es_media_dev_proc_init: dec succeed, minor 0, index 0, proc ffff8f8002e9d000
[    7.683083] ESWV: init dev channel succeed, minor 1
[    7.688297] ESWV: es_media_dev_proc_init: enc succeed, minor 2, index 1, proc ffff8f8002f85000
[    7.697098] ESWV: init dev channel succeed, minor 3
[    7.702297] ESWV: es_media_dev_proc_init: bms succeed, minor 4, index 2, proc ffff8f8003305000
[    7.711206] ESWV: es_media_dev_proc_init: vps succeed, minor 5, index 3, proc ffff8f8003355000
[    7.720011] ESWV: init dev channel succeed, minor 6
[    7.725197] ESWV: es_media_dev_proc_init: vo succeed, minor 7, index 4, proc ffff8f8003399000
[    7.733934] ESWV: init dev channel succeed, minor 8
[    7.738953] ESWV: es media driver insert...done!!!
[    7.744080] eswin-mailbox 50a00000.mbox: device is not dma coherent
[    7.750361] eswin-mailbox 50a00000.mbox: device is not behind an iommu
[    7.757674] debugfs: Directory '50a00000.mbox' with parent 'regmap' already present!
[    7.765464] eswin-mailbox 50a00000.mbox: register sucessfully, wakeup source 'false
[    7.773231] eswin-mailbox 50a20000.mbox: device is not dma coherent
[    7.779529] eswin-mailbox 50a20000.mbox: device is not behind an iommu
[    7.786109] ddr self refresh enabled, device 50a20000.mbox support to be wakeup source
[    7.794850] debugfs: Directory '50a20000.mbox' with parent 'regmap' already present!
[    7.802637] eswin-mailbox 50a20000.mbox: register sucessfully, wakeup source true
[    7.810237] eswin-mailbox 50a60000.mbox: device is not dma coherent
[    7.816532] eswin-mailbox 50a60000.mbox: device is not behind an iommu
[    7.823780] debugfs: Directory '50a60000.mbox' with parent 'regmap' already present!
[    7.831584] eswin-mailbox 50a60000.mbox: register sucessfully, wakeup source 'false
[    7.839610] eswin-mailbox 70a00000.mbox: device is not dma coherent
[    7.845898] eswin-mailbox 70a00000.mbox: device is not behind an iommu
[    7.853252] debugfs: Directory '70a00000.mbox' with parent 'regmap' already present!
[    7.861029] eswin-mailbox 70a00000.mbox: register sucessfully, wakeup source 'false
[    7.868815] eswin-mailbox 70a20000.mbox: device is not dma coherent
[    7.875108] eswin-mailbox 70a20000.mbox: device is not behind an iommu
[    7.882415] debugfs: Directory '70a20000.mbox' with parent 'regmap' already present!
[    7.890208] eswin-mailbox 70a20000.mbox: register sucessfully, wakeup source 'false
[    7.897986] eswin-mailbox 70a60000.mbox: device is not dma coherent
[    7.904284] eswin-mailbox 70a60000.mbox: device is not behind an iommu
[    7.911591] debugfs: Directory '70a60000.mbox' with parent 'regmap' already present!
[    7.919370] eswin-mailbox 70a60000.mbox: register sucessfully, wakeup source 'false
[    7.928265] __add_eswin_rsvmem_heap for mmz_nid_0_part_0 successfully!
[    7.934948] __add_eswin_rsvmem_heap for mmz_nid_1_part_0 successfully!
[    7.941754] misc mmz_vb: mmz_nid_0_part_0 was found successfully
[    7.947781] misc mmz_vb: mmz_nid_1_part_0 was found successfully
[    7.953803] create file vb with mode 666
[    7.959676] riscv-pmu-sbi: SBI PMU extension is available
[    7.965110] riscv-pmu-sbi: 16 firmware and 6 hardware counters
[    7.978163] win2030-noc 52060000.d0_cfg_noc: device is not dma coherent
[    7.984810] win2030-noc 52060000.d0_cfg_noc: device is not behind an iommu
[    7.991720] win2030-noc 52060000.d0_cfg_noc: Begin initialization
[    7.998279] win2030-noc 52060000.d0_cfg_noc: error policy: print
[    8.004306] win2030-noc 52060000.d0_cfg_noc: no QoS config list
[    8.010359] win2030-noc 52060000.d0_cfg_noc: enable error logging
[    8.016653] win2030-noc 52060000.d0_cfg_noc: No NOC sniffer or NOC sniffer init failure
[    8.024677] win2030-noc 52060000.d0_cfg_noc: No NOC profiler or NOC profiler init failure
[    8.033038] win2030-noc 52060000.d0_cfg_noc: initialization sucess
[    8.039354] win2030-noc 52081400.d0_llc_noc: device is not dma coherent
[    8.046000] win2030-noc 52081400.d0_llc_noc: device is not behind an iommu
[    8.052927] win2030-noc 52081400.d0_llc_noc: Begin initialization
[    8.059405] win2030-noc 52081400.d0_llc_noc: error policy: print
[    8.065424] win2030-noc 52081400.d0_llc_noc: no QoS config list
[    8.072319] win2030-noc 52081400.d0_llc_noc: enable error logging
[    8.078529] win2030-noc 52081400.d0_llc_noc: "clock,rate" property missing. Will use clk_get_rate() to discover clock rate.
[    8.089719] win2030-noc 52081400.d0_llc_noc: No NOC profiler or NOC profiler init failure
[    8.099346] win2030-noc 52081400.d0_llc_noc: initialization sucess
[    8.105834] win2030-noc 52002c00.d0_sys_noc: device is not dma coherent
[    8.112485] win2030-noc 52002c00.d0_sys_noc: device is not behind an iommu
[    8.119407] win2030-noc 52002c00.d0_sys_noc: Begin initialization
[    8.126088] win2030-noc 52002c00.d0_sys_noc: error policy: print
[    8.132241] win2030-noc 52002c00.d0_sys_noc: eswin,DSPT-qos-settings added to list(0)
[    8.140213] win2030-noc 52002c00.d0_sys_noc: eswin,NPU-qos-settings added to list(0)
[    8.140246] scsi 0:0:0:0: Direct-Access     Mass     Storage Device   1.00 PQ: 0 ANSI: 0 CCS
[    8.148020] win2030-noc 52002c00.d0_sys_noc: eswin,SPISLV_TBU3-qos-settings added to list(0)
[    8.156922] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    8.167007] win2030-noc 52002c00.d0_sys_noc: enable error logging
[    8.176663] win2030-noc 52002c00.d0_sys_noc: "clock,rate" property missing. Will use clk_get_rate() to discover clock rate.
[    8.187862] sd 0:0:0:0: [sda] Media removed, stopped polling
[    8.190933] win2030-noc 52002c00.d0_sys_noc: initialization sucess
[    8.194246] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    8.200162] win2030-noc 52021400.d0_media_noc: device is not dma coherent
[    8.212095] win2030-noc 52021400.d0_media_noc: device is not behind an iommu
[    8.219199] win2030-noc 52021400.d0_media_noc: Begin initialization
[    8.226011] win2030-noc 52021400.d0_media_noc: error policy: print
[    8.232287] win2030-noc 52021400.d0_media_noc: eswin,GPU-qos-settings added to list(0)
[    8.240301] win2030-noc 52021400.d0_media_noc: eswin,TBU2-qos-settings added to list(0)
[    8.248363] win2030-noc 52021400.d0_media_noc: eswin,VC-qos-settings added to list(0)
[    8.257207] win2030-noc 52021400.d0_media_noc: enable error logging
[    8.263607] win2030-noc 52021400.d0_media_noc: "clock,rate" property missing. Will use clk_get_rate() to discover clock rate.
[    8.274968] win2030-noc 52021400.d0_media_noc: No NOC profiler or NOC profiler init failure
[    8.285504] win2030-noc 52021400.d0_media_noc: initialization sucess
[    8.292154] win2030-noc 52041400.d0_realtime_noc: device is not dma coherent
[    8.299238] win2030-noc 52041400.d0_realtime_noc: device is not behind an iommu
[    8.306577] win2030-noc 52041400.d0_realtime_noc: Begin initialization
[    8.313473] win2030-noc 52041400.d0_realtime_noc: error policy: print
[    8.320007] win2030-noc 52041400.d0_realtime_noc: eswin,TBU0-qos-settings added to list(0)
[    8.328348] win2030-noc 52041400.d0_realtime_noc: eswin,VO-qos-settings added to list(0)
[    8.337442] win2030-noc 52041400.d0_realtime_noc: enable error logging
[    8.344069] win2030-noc 52041400.d0_realtime_noc: "clock,rate" property missing. Will use clk_get_rate() to discover clock rate.
[    8.355697] win2030-noc 52041400.d0_realtime_noc: No NOC profiler or NOC profiler init failure
[    8.366206] win2030-noc 52041400.d0_realtime_noc: initialization sucess
[    8.373126] win2030-noc 72060000.d1_cfg_noc: device is not dma coherent
[    8.379784] win2030-noc 72060000.d1_cfg_noc: device is not behind an iommu
[    8.386701] win2030-noc 72060000.d1_cfg_noc: Begin initialization
[    8.393191] win2030-noc 72060000.d1_cfg_noc: error policy: print
[    8.399213] win2030-noc 72060000.d1_cfg_noc: no QoS config list
[    8.405253] win2030-noc 72060000.d1_cfg_noc: enable error logging
[    8.411403] win2030-noc 72060000.d1_cfg_noc: Error interrupt happen!
[    8.411521] win2030-noc 72060000.d1_cfg_noc: No NOC sniffer or NOC sniffer init failure
[    8.417809] win2030-noc 72060000.d1_cfg_noc: ErrLog0 0x80030000
[    8.417819] win2030-noc 72060000.d1_cfg_noc: ErrLog1 0x00002919
[    8.417824] win2030-noc 72060000.d1_cfg_noc: ErrLog3 0x00000000
[    8.425839] win2030-noc 72060000.d1_cfg_noc: No NOC profiler or NOC profiler init failure
[    8.431750] win2030-noc 72060000.d1_cfg_noc: ErrLog5 0x00000020
[    8.431806] win2030-noc 72060000.d1_cfg_noc: timestamp: 4294894310:
[    8.431806] 	ErrorLogger0: 0x80030000
[    8.431806] 		lock: Not Locked
[    8.431806] 		OpCode: RD: data read with incrementing address
[    8.431806] 		ErrCode: SLV (error source: Target): error detected by the Slave without any information or no Error
[    8.431806] 		Len1: 3
[    8.431806] 		Format: NTTP v3.5 (Ok)
[    8.431806] 	ErrorLogger1: 0x2919
[    8.431806] 		InitFlow: snoc_cnoc/I/0
[    8.431806] 		TargetFlow: cnoc_lsp_apb3/T/0
[    8.431806] 		TargetSubRange: 1
[    8.431806] 		SeqId: 19
[    8.431806] 	AbsoluteAddress: 0x70900000
[    8.431806] 	ErrorLogger3: 0x0
[    8.431806] 		AbsoluteAddress: 0
[    8.431806] 	ErrorLogger5: 0x20
[    8.431806] 		User_flag: Prot_1
[    8.431806]
[    8.437851] win2030-noc 72060000.d1_cfg_noc: initialization sucess
[    8.533615] win2030-noc 72081400.d1_llc_noc: device is not dma coherent
[    8.540285] win2030-noc 72081400.d1_llc_noc: device is not behind an iommu
[    8.547203] win2030-noc 72081400.d1_llc_noc: Begin initialization
[    8.553693] win2030-noc 72081400.d1_llc_noc: error policy: print
[    8.559720] win2030-noc 72081400.d1_llc_noc: no QoS config list
[    8.566639] win2030-noc 72081400.d1_llc_noc: enable error logging
[    8.572836] win2030-noc 72081400.d1_llc_noc: "clock,rate" property missing. Will use clk_get_rate() to discover clock rate.
[    8.584028] win2030-noc 72081400.d1_llc_noc: No NOC profiler or NOC profiler init failure
[    8.593785] win2030-noc 72081400.d1_llc_noc: initialization sucess
[    8.600284] win2030-noc 72002c00.d1_sys_noc: device is not dma coherent
[    8.606933] win2030-noc 72002c00.d1_sys_noc: device is not behind an iommu
[    8.613847] win2030-noc 72002c00.d1_sys_noc: Begin initialization
[    8.620792] win2030-noc 72002c00.d1_sys_noc: error policy: print
[    8.626921] win2030-noc 72002c00.d1_sys_noc: eswin,DSPT-qos-settings added to list(0)
[    8.634854] win2030-noc 72002c00.d1_sys_noc: eswin,NPU-qos-settings added to list(0)
[    8.642675] win2030-noc 72002c00.d1_sys_noc: eswin,SPISLV_TBU3-qos-settings added to list(0)
[    8.653448] win2030-noc 72002c00.d1_sys_noc: enable error logging
[    8.659743] win2030-noc 72002c00.d1_sys_noc: "clock,rate" property missing. Will use clk_get_rate() to discover clock rate.
[    8.675535] win2030-noc 72002c00.d1_sys_noc: initialization sucess
[    8.682117] win2030-noc 72021400.d1_media_noc: device is not dma coherent
[    8.688960] win2030-noc 72021400.d1_media_noc: device is not behind an iommu
[    8.696063] win2030-noc 72021400.d1_media_noc: Begin initialization
[    8.702774] win2030-noc 72021400.d1_media_noc: error policy: print
[    8.709049] win2030-noc 72021400.d1_media_noc: eswin,GPU-qos-settings added to list(0)
[    8.717044] win2030-noc 72021400.d1_media_noc: eswin,TBU2-qos-settings added to list(0)
[    8.725140] win2030-noc 72021400.d1_media_noc: eswin,VC-qos-settings added to list(0)
[    8.733999] win2030-noc 72021400.d1_media_noc: enable error logging
[    8.740386] win2030-noc 72021400.d1_media_noc: "clock,rate" property missing. Will use clk_get_rate() to discover clock rate.
[    8.751758] win2030-noc 72021400.d1_media_noc: No NOC profiler or NOC profiler init failure
[    8.761701] win2030-noc 72021400.d1_media_noc: initialization sucess
[    8.768380] win2030-noc 72041400.d1_realtime_noc: device is not dma coherent
[    8.775479] win2030-noc 72041400.d1_realtime_noc: device is not behind an iommu
[    8.782826] win2030-noc 72041400.d1_realtime_noc: Begin initialization
[    8.789775] win2030-noc 72041400.d1_realtime_noc: error policy: print
[    8.796334] win2030-noc 72041400.d1_realtime_noc: eswin,TBU0-qos-settings added to list(0)
[    8.804681] win2030-noc 72041400.d1_realtime_noc: eswin,VO-qos-settings added to list(0)
[    8.813812] win2030-noc 72041400.d1_realtime_noc: enable error logging
[    8.820459] win2030-noc 72041400.d1_realtime_noc: "clock,rate" property missing. Will use clk_get_rate() to discover clock rate.
[    8.832093] win2030-noc 72041400.d1_realtime_noc: No NOC profiler or NOC profiler init failure
[    8.842335] win2030-noc 72041400.d1_realtime_noc: initialization sucess
[    8.851420] asoc-simple-card soc:soundcard: device is not dma coherent
[    8.858013] asoc-simple-card soc:soundcard: device is not behind an iommu
[    8.865532] asoc-audio-graph-card soc:graphcard1: device is not dma coherent
[    8.872603] asoc-audio-graph-card soc:graphcard1: device is not behind an iommu
[    8.880577] asoc-audio-graph-card soc:graphcard4: device is not dma coherent
[    8.887644] asoc-audio-graph-card soc:graphcard4: device is not behind an iommu
[    8.895174] asoc-audio-graph-card soc:graphcard: device is not dma coherent
[    8.902151] asoc-audio-graph-card soc:graphcard: device is not behind an iommu
[    8.909425] asoc-audio-graph-card: probe of soc:graphcard failed with error -22
[    8.917759] es-i2s 50200000.i2s0: device is not dma coherent
[    8.923441] es-i2s 50200000.i2s0: device is not behind an iommu
[    8.929393] es-i2s 50200000.i2s0: dev name:i2s0
[    8.934020] es-i2s 50200000.i2s0: nid:0
[    8.938234] es-i2s 50200000.i2s0: request dma channel[tx] failed
[    8.944261] es-i2s 50200000.i2s0: could not register pcm: -517
[    8.950558] es-i2s 50210000.i2s1: device is not dma coherent
[    8.956243] es-i2s 50210000.i2s1: device is not behind an iommu
[    8.962213] es-i2s 50210000.i2s1: dev name:i2s1
[    8.966823] es-i2s 50210000.i2s1: nid:0
[    8.970732] es-i2s 50210000.i2s1: request dma channel[tx] failed
[    8.976751] es-i2s 50210000.i2s1: could not register pcm: -517
[    8.982905] es-i2s 70200000.i2s0: device is not dma coherent
[    8.988583] es-i2s 70200000.i2s0: device is not behind an iommu
[    8.994527] es-i2s 70200000.i2s0: dev name:i2s0
[    8.999130] es-i2s 70200000.i2s0: nid:1
[    9.003179] es-i2s 70200000.i2s0: request dma channel[tx] failed
[    9.009200] es-i2s 70200000.i2s0: could not register pcm: -517
[    9.015309] drop_monitor: Initializing network drop monitor service
[    9.021758] NET: Registered PF_PACKET protocol family
[    9.027837] rfkill_gpio rfkill_wifi: device is dma coherent
[    9.033485] rfkill_gpio rfkill_wifi: device is not behind an iommu
[    9.039853] rfkill_gpio rfkill_wifi: Wi-Fi device registered.
[    9.045691] rfkill_gpio rfkill_bt: device is dma coherent
[    9.051116] rfkill_gpio rfkill_bt: device is not behind an iommu
[    9.057288] rfkill_gpio rfkill_bt: Bluetooth device registered.
[    9.063327] Key type dns_resolver registered
[    9.067669] start plist test
[    9.071713] end plist test
[    9.089327] registered taskstats version 1
[    9.093822] Loading compiled-in X.509 certificates
[    9.111134] debug_vm_pgtable: [debug_vm_pgtable         ]: Validating architecture page table helpers
[    9.122657] Key type .fscrypt registered
[    9.130454] Key type fscrypt-provisioning registered
[    9.155694] Key type encrypted registered
[    9.159734] AppArmor: AppArmor sha1 policy hashing enabled
[    9.215864] i2c_designware 50950000.i2c: device is not dma coherent
[    9.220075] reg-fixed-voltage regulator-gpio69: device is dma coherent
[    9.222190] i2c_designware 50950000.i2c: device is not behind an iommu
[    9.228756] reg-fixed-voltage regulator-gpio69: device is not behind an iommu
[    9.228839] eswin-pinctrl 51600080.pinctrl: unsupported configuration parameter '17'
[    9.228854] reg-fixed-voltage regulator-gpio27: device is dma coherent
[    9.228858] reg-fixed-voltage regulator-gpio27: device is not behind an iommu
[    9.235898] /soc/i2s1@50210000: Fixed dependency cycle(s) with /soc/i2c@50950000/es8326@19
[    9.272282] /soc/i2c@50950000/es8326@19: Fixed dependency cycle(s) with /soc/i2s1@50210000
[    9.282092] i2c_designware 50960000.i2c: device is not dma coherent
[    9.288383] i2c_designware 50960000.i2c: device is not behind an iommu
[    9.318148] NPU_SVCC: Operation of current configuration missing
[    9.324267] NPU_SVCC: IC does not support requested over voltage limits
[    9.330889] NPU_SVCC: IC does not support requested under voltage limits
[    9.337601] NPU_SVCC: IC does not support requested temperature limits
[    9.345737] tps549d22 1-0010: tps549d22_probe
[    9.350477] i2c_designware 50970000.i2c: device is not dma coherent
[    9.356775] i2c_designware 50970000.i2c: device is not behind an iommu
[    9.364385] i2c_hid_of 2-002c: supply vdd not found, using dummy regulator
[    9.371306] cm32181 2-0010: cm32181_probe: register init failed
[    9.371427] i2c_hid_of 2-002c: supply vddl not found, using dummy regulator
[    9.377259] cm32181: probe of 2-0010 failed with error -121
[    9.390059] cm32181 2-0029: cm32181_probe: register init failed
[    9.396009] cm32181: probe of 2-0029 failed with error -121
[    9.401842] i2c_designware 51830000.i2c: device is not dma coherent
[    9.408185] i2c_designware 51830000.i2c: device is not behind an iommu
[    9.420083] hwmon hwmon5: temp1_input not attached to any thermal zone
[    9.426679] tmp102 3-0048: initialized
[    9.431346] at24 3-0050: 256 byte 24c02 EEPROM, writable, 8 bytes/write
[    9.438192] i2c_designware 51838000.i2c: device is not dma coherent
[    9.444505] i2c_designware 51838000.i2c: device is not behind an iommu
[    9.451660] i2c_designware 70960000.i2c: device is not dma coherent
[    9.457953] i2c_designware 70960000.i2c: device is not behind an iommu
[    9.488520] NPU_SVCC2: Operation of current configuration missing
[    9.494645] NPU_SVCC2: IC does not support requested over voltage limits
[    9.501359] NPU_SVCC2: IC does not support requested under voltage limits
[    9.508152] NPU_SVCC2: IC does not support requested temperature limits
[    9.516472] tps549d22 5-0010: tps549d22_probe
[    9.521212] i2c_designware 71830000.i2c: device is not dma coherent
[    9.527504] i2c_designware 71830000.i2c: device is not behind an iommu
[    9.538866] hwmon hwmon7: temp1_input not attached to any thermal zone
[    9.545433] tmp102 6-0048: initialized
[    9.549384] simple-pm-bus soc:ipc@0: device is not dma coherent
[    9.555467] simple-pm-bus soc:ipc@0: Adding to iommu group 4
[    9.561228] simple-pm-bus soc:ipc@0: device is behind an iommu
[    9.567273] win2030-ipc soc:ipc@0: device is not dma coherent
[    9.573032] win2030-ipc soc:ipc@0: device is behind an iommu
[    9.578729] win2030-ipc soc:ipc@0: success to config dma streamID(24) for ipc@0!
[    9.586143] win2030-ipc soc:ipc@0: success to config dma streamID(24) for ipc@0!
[    9.594215] win2030-ipc soc:ipc@0: initialized successfully
[    9.599924] simple-pm-bus soc:ipc@1: device is not dma coherent
[    9.605930] simple-pm-bus soc:ipc@1: Adding to iommu group 5
[    9.611803] simple-pm-bus soc:ipc@1: device is behind an iommu
[    9.617815] win2030-ipc soc:ipc@1: device is not dma coherent
[    9.623573] win2030-ipc soc:ipc@1: device is behind an iommu
[    9.629280] win2030-ipc soc:ipc@1: success to config dma streamID(24) for ipc@1!
[    9.636697] win2030-ipc soc:ipc@1: success to config dma streamID(24) for ipc@1!
[    9.644802] win2030-ipc soc:ipc@1: initialized successfully
[    9.650618] dwc-pwm 50818000.pwm: device is not dma coherent
[    9.656295] dwc-pwm 50818000.pwm: device is not behind an iommu
[    9.662687] dwc-pwm 70818000.pwm: device is not dma coherent
[    9.668364] dwc-pwm 70818000.pwm: device is not behind an iommu
[    9.674681] pwm-backlight backlight: device is dma coherent
[    9.680272] pwm-backlight backlight: device is not behind an iommu
[    9.686748] dw_axi_dmac_platform 518c0000.dma-controller-aon: device is not dma coherent
[    9.694918] dw_axi_dmac_platform 518c0000.dma-controller-aon: Adding to iommu group 6
[    9.702847] dw_axi_dmac_platform 518c0000.dma-controller-aon: device is behind an iommu
[    9.711285] dw_axi_dmac_platform 518c0000.dma-controller-aon: success to config dma streamID(26) for dma-controller-aon@0x518c0000!
[    9.723771] dw_axi_dmac_platform 518c0000.dma-controller-aon: DesignWare AXI DMA Controller, 16 channels
[    9.733401] dw_axi_dmac_platform 50430000.dma-controller-hsp: device is not dma coherent
[    9.741552] dw_axi_dmac_platform 50430000.dma-controller-hsp: Adding to iommu group 7
[    9.749467] dw_axi_dmac_platform 50430000.dma-controller-hsp: device is behind an iommu
[    9.758324] dw_axi_dmac_platform 50430000.dma-controller-hsp: DesignWare AXI DMA Controller, 12 channels
[    9.767982] dw_axi_dmac_platform 718c0000.dma-controller-aon: device is not dma coherent
[    9.776168] dw_axi_dmac_platform 718c0000.dma-controller-aon: Adding to iommu group 8
[    9.784214] dw_axi_dmac_platform 718c0000.dma-controller-aon: device is behind an iommu
[    9.792640] dw_axi_dmac_platform 718c0000.dma-controller-aon: success to config dma streamID(26) for dma-controller-aon@0x718c0000!
[    9.805101] dw_axi_dmac_platform 718c0000.dma-controller-aon: DesignWare AXI DMA Controller, 16 channels
[    9.814627] debugfs: Directory 'dw-axi-aon-dma' with parent '/' already present!
[    9.822044] dw_axi_dmac_platform 718c0000.dma-controller-aon: failed to create debugfs dir!
[    9.830508] dw_axi_dmac_platform 70430000.dma-controller-hsp: device is not dma coherent
[    9.838678] dw_axi_dmac_platform 70430000.dma-controller-hsp: Adding to iommu group 9
[    9.846728] dw_axi_dmac_platform 70430000.dma-controller-hsp: device is behind an iommu
[    9.855655] dw_axi_dmac_platform 70430000.dma-controller-hsp: DesignWare AXI DMA Controller, 12 channels
[    9.865173] debugfs: Directory 'dw-axi-hsp-dma' with parent '/' already present!
[    9.872585] dw_axi_dmac_platform 70430000.dma-controller-hsp: failed to create debugfs dir!
[    9.881155] win2030-lpcpu soc:lpcpu@0: device is not dma coherent
[    9.887341] win2030-lpcpu soc:lpcpu@0: Adding to iommu group 10
[    9.893379] win2030-lpcpu soc:lpcpu@0: device is behind an iommu
[    9.899707] win2030-lpcpu soc:lpcpu@0: Reserved memory region: 0x1fe000000, size: 0x2000000
[35mmbox lpcpu <- u84: [0m[35m0x[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35m55[0m[35mec[0m[35mca[0m[35m (BOOT_STATUS)
[0m[35mmbox lpcpu -> u84: [0m[35m0x[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35mac[0m[35mce[0m[35m55[0m[35m (FW_LOAD_SUCCESS)
[0m[    9.934988] win2030-lpcpu soc:lpcpu@0: gpio config: name: socvdd, port: 21 polarity: positive
[    9.943603] win2030-lpcpu soc:lpcpu@0: gpio config: name: d2dpwr, port: 18 polarity: positive
[    9.952135] win2030-lpcpu soc:lpcpu@0: gpio config: name: npupwr, port: 19 polarity: positive
[    9.960665] win2030-lpcpu soc:lpcpu@0: gpio config: name: lcdpwr, port: 27 polarity: positive
[    9.969199] win2030-lpcpu soc:lpcpu@0: gpio config: name: pcieen, port: 54 polarity: positive
[    9.977731] win2030-lpcpu soc:lpcpu@0: gpio config: name: lt6711, port: 55 polarity: positive
[    9.986261] win2030-lpcpu soc:lpcpu@0: gpio config: name: pasd, port: 111 polarity: negative
[    9.994710] win2030-lpcpu soc:lpcpu@0: gpio config: name: campwr, port: 92 polarity: positive
[   10.003240] win2030-lpcpu soc:lpcpu@0: gpio config: name: cpuvdd, port: 94 polarity: positive
[   10.011977] win2030-lpcpu soc:lpcpu@0: Direct firmware load for eic7702_lpcpu_npu_fw_die0.bin failed with error -2
[   10.022378] win2030-lpcpu soc:lpcpu@0: Lpcpu npu-fw load error!
[   10.028338] win2030-lpcpu soc:lpcpu@0: npu firmware prepare error!
[35mmbox lpcpu <- u84: [0m[35m0x[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35m67[0m[35m66[0m[35m63[0m[35m (CONFIG_SEND)
[0m[35mmbox lpcpu -> u84: [0m[35m0x[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35m00[0m[35m36[0m[35m66[0m[35m76[0m[35m (CONFIG_RECV_SUCCESS)
[0m[   10.061604] win2030-lpcpu soc:lpcpu@0: eswin lpcpu initialized
[   10.068348] win2030-lpcpu soc:lpcpu@1: device is not dma coherent
[   10.074533] win2030-lpcpu soc:lpcpu@1: Adding to iommu group 11
[   10.081427] win2030-lpcpu soc:lpcpu@1: device is behind an iommu
[   10.088265] win2030-lpcpu soc:lpcpu@1: Reserved memory region: 0x21fe000000, size: 0x2000000
[   10.123830] win2030-lpcpu soc:lpcpu@1: Direct firmware load for eic7702_lpcpu_npu_fw_die1.bin failed with error -2
[   10.134238] win2030-lpcpu soc:lpcpu@1: Lpcpu npu-fw load error!
[   10.140177] win2030-lpcpu soc:lpcpu@1: npu firmware prepare error!
[   10.173485] win2030-lpcpu soc:lpcpu@1: eswin lpcpu initialized
[   10.179516] eswin-pmu 51808000.power-controller: device is not dma coherent
[   10.186496] eswin-pmu 51808000.power-controller: device is not behind an iommu
[   10.193746] eswin-pmu 51808000.power-controller: start registe power domains
[   10.201374] eswin-pmu 51808000.power-controller: [D0_PCIE] was already in power on state. 1 opened domains.
[   10.211140] eswin-pmu 51808000.power-controller: [D0_DSP1] was already in power on state. 2 opened domains.
[   10.220894] eswin-pmu 51808000.power-controller: [D0_VI] was already in power on state. 3 opened domains.
[   10.230475] eswin-pmu 51808000.power-controller: [D0_VO] was already in power on state. 4 opened domains.
[   10.240063] eswin-pmu 51808000.power-controller: [D0_CODEC] was already in power on state. 5 opened domains.
[   10.249907] eswin-pmu 51808000.power-controller: [D0_DSP2] was already in power on state. 6 opened domains.
[   10.259660] eswin-pmu 51808000.power-controller: [D0_DSP3] was already in power on state. 7 opened domains.
[   10.269415] eswin-pmu 51808000.power-controller: registered 7 power domains
[   10.276565] eswin-pmu 71808000.power-controller: device is not dma coherent
[   10.283545] eswin-pmu 71808000.power-controller: device is not behind an iommu
[   10.290813] eswin-pmu 71808000.power-controller: start registe power domains
[   10.298231] eswin-pmu 71808000.power-controller: [D1_PCIE] was already in power on state. 1 opened domains.
[   10.308007] eswin-pmu 71808000.power-controller: [D1_DSP1] was already in power on state. 2 opened domains.
[   10.317768] eswin-pmu 71808000.power-controller: [D1_VI] was already in power on state. 3 opened domains.
[   10.327356] eswin-pmu 71808000.power-controller: [D1_VO] was already in power on state. 4 opened domains.
[   10.336939] eswin-pmu 71808000.power-controller: [D1_CODEC] was already in power on state. 5 opened domains.
[   10.346783] eswin-pmu 71808000.power-controller: [D1_DSP2] was already in power on state. 6 opened domains.
[   10.356548] eswin-pmu 71808000.power-controller: [D1_DSP3] was already in power on state. 7 opened domains.
[   10.366308] eswin-pmu 71808000.power-controller: registered 7 power domains
[   10.373446] es_drm soc:display-subsystem@0: device is not dma coherent
[   10.379983] es_drm soc:display-subsystem@0: device is not behind an iommu
[   10.386846] [drm] drm platform probe enter
[   10.390958] es_drm soc:display-subsystem@0: No memory-region specified, use system cma, ret:-19
[   10.399682] es_drm soc:display-subsystem@0: matched: /soc/display_control@502c0000, dev->name:display_control
[   10.485144] es_drm soc:display-subsystem@0: bound 502c0000.display_control (ops dc_component_ops)
[   10.494771] dw-hdmi-eswin 502a0000.hdmi: numa_id=0
[   10.502641] dw-hdmi-eswin 502a0000.hdmi: Detected HDMI TX controller v2.14a with HDCP (DWC HDMI 2.0 TX PHY)
[   10.512871] dw-hdmi-eswin 502a0000.hdmi: intr status 0x3c
[   10.513212] dw-hdmi-eswin 502a0000.hdmi: registered DesignWare HDMI I2C bus driver
[   10.526945] es_drm soc:display-subsystem@0: bound 502a0000.hdmi (ops dw_hdmi_eswin_ops)
[   10.535170] es_drm soc:display-subsystem@0: bound soc:es_wb@0 (ops vd_component_ops)
[   10.543487] [drm] Creat debugfs file for Vitual dev:Virtual-1
[   10.543499] [drm] Initialized es_drm 1.0.0 20191101 for soc:display-subsystem@0 on minor 1
[   10.557539] es_drm soc:display-subsystem@0: matched: /soc/display_control@502c0000, dev->name:display_control
[   10.567670] es_drm soc:display-subsystem@0: [drm] Cannot find any crtc or sizes
[   10.575044] [drm] drm dev is on die0
[   10.578628] [drm] drm_dev name:0
[   10.581889] es_drm soc:display-subsystem@0: [drm] Cannot find any crtc or sizes
[   10.587880] es_drm soc:display-subsystem@1: device is not dma coherent
[   10.589225] es_drm soc:display-subsystem@0: [drm] Cannot find any crtc or sizes
[   10.595833] es_drm soc:display-subsystem@1: device is not behind an iommu
[   10.603084] es_drm soc:display-subsystem@0: [drm] Cannot find any crtc or sizes
[   10.603101] es_drm soc:display-subsystem@0: [drm] Cannot find any crtc or sizes
[   10.610117] [drm] drm platform probe enter
[   10.628784] es_drm soc:display-subsystem@1: No memory-region specified, use system cma, ret:-19
[   10.637726] es_drm soc:display-subsystem@1: matched: /soc/display_control@702c0000, dev->name:display_control
[   10.725534] es_drm soc:display-subsystem@1: bound 702c0000.display_control (ops dc_component_ops)
[   10.734723] dw-hdmi-eswin 702a0000.hdmi: numa_id=1
[   10.758437] dw-hdmi-eswin 702a0000.hdmi: Detected HDMI TX controller v2.14a with HDCP (DWC HDMI 2.0 TX PHY)
[   10.769179] dw-hdmi-eswin 702a0000.hdmi: intr status 0x3d
[   10.774813] dw-hdmi-eswin 702a0000.hdmi: dw hdmi plug in
[   10.781038] dw-hdmi-eswin 702a0000.hdmi: registered DesignWare HDMI I2C bus driver
[   10.791309] es_drm soc:display-subsystem@1: bound 702a0000.hdmi (ops dw_hdmi_eswin_ops)
[   10.799809] es_drm soc:display-subsystem@1: bound soc:es_wb@1 (ops vd_component_ops)
[   10.809060] [drm] Creat debugfs file for Vitual dev:Virtual-2
[   10.809104] [drm] Initialized es_drm 1.0.0 20191101 for soc:display-subsystem@1 on minor 2
[   10.823382] es_drm soc:display-subsystem@1: matched: /soc/display_control@702c0000, dev->name:display_control
[   10.938581] dw-hdmi-eswin 702a0000.hdmi: got edid: width[64] x height[40]
[   11.083538] dw-hdmi-eswin 702a0000.hdmi: got edid: width[64] x height[40]
[   11.189602] dw-hdmi-eswin 702a0000.hdmi: got edid: width[64] x height[40]
[   11.235574] Console: switching to colour frame buffer device 320x100
[   11.279504] es_drm soc:display-subsystem@1: [drm] fb0: es_drmdrmfb frame buffer device
[   11.287794] [drm] drm dev is on die1
[   11.291488] [drm] drm_dev name:1
[   11.295836] eswin_fan_control_driver 50b50000.fan_control: device is not dma coherent
[   11.303852] eswin_fan_control_driver 50b50000.fan_control: device is not behind an iommu
[   11.313225] eswin_fan_control_driver 50b50000.fan_control: state.period: 100000 state.duty_cycle: 50000
[   11.323213] eswin_fan_control_driver 50b50000.fan_control: eswin fan control init exit
[   11.331999] es_vdec soc:video-decoder0@50100000: device is not dma coherent
[   11.339511] es_vdec soc:video-decoder0@50100000: Adding to iommu group 12
[   11.346808] es_vdec soc:video-decoder0@50100000: device is behind an iommu
[   11.355539] [es_vdec:dtsp]mapped irq is 213
[   11.359979] [es_vdec:dtsp]mapped irq is 214
[   11.364262] [es_vdec:main]initializing vdec, numa id 0
[   11.370938] es_vdec soc:video-decoder0@50100000: EM: OPP:400000 is inefficient
[   11.378366] es_vdec soc:video-decoder0@50100000: EM: OPP:320000 is inefficient
[   11.385697] es_vdec soc:video-decoder0@50100000: EM: OPP:200000 is inefficient
[   11.393303] es_vdec soc:video-decoder0@50100000: EM: created perf domain
[   11.402127] [es_vdec:main]VD set aclk to 1040000000HZ
[   11.407379] [es_vdec:main]VD set jd_clk to 800000000HZ
[   11.412635] [es_vdec:main]VD set vd_clk to 800000000HZ
[   11.418575] [es_vdec:main]The first core loaded, waiting for another...
[   11.419208] es_vdec soc:video-decoder1@70100000: device is not dma coherent
[   11.423468] dw-hdmi-eswin 702a0000.hdmi: got edid: width[64] x height[40]
[   11.426202] es_vdec soc:video-decoder1@70100000: Adding to iommu group 13
[   11.446988] es_vdec soc:video-decoder1@70100000: device is behind an iommu
[   11.455295] [es_vdec:dtsp]mapped irq is 215
[   11.459833] [es_vdec:dtsp]mapped irq is 216
[   11.464169] [es_vdec:main]initializing vdec, numa id 1
[   11.470680] es_vdec soc:video-decoder1@70100000: EM: OPP:400000 is inefficient
[   11.478081] es_vdec soc:video-decoder1@70100000: EM: OPP:320000 is inefficient
[   11.485422] es_vdec soc:video-decoder1@70100000: EM: OPP:200000 is inefficient
[   11.493039] es_vdec soc:video-decoder1@70100000: EM: created perf domain
[   11.501321] [es_vdec:main]VD set aclk to 1040000000HZ
[   11.506584] [es_vdec:main]VD set jd_clk to 800000000HZ
[   11.511820] [es_vdec:main]VD set vd_clk to 800000000HZ
[   11.517762] [es_vdec:subs]decoding mode = 1
[   11.522131] [es_vdec:subs]core type 0
[   11.525877] [es_vdec:subs][0] multicorebase 0x50100800, iosize 3072
[   11.532240] [es_vdec:subs]core type 1
[   11.535979] [es_vdec:subs][1] multicorebase 0x50120800, iosize 3072
[   11.542322] [es_vdec:subs]core type 0
[   11.546050] [es_vdec:subs][2] multicorebase 0x70100800, iosize 3072
[   11.552386] [es_vdec:subs]core type 1
[   11.553023] dw-hdmi-eswin 702a0000.hdmi: got edid: width[64] x height[40]
[   11.556099] [es_vdec:subs][3] multicorebase 0x70120800, iosize 3072
[   11.569334] es_vdec soc:video-decoder0@50100000: device is not dma coherent
[   11.576456] es_vdec soc:video-decoder0@50100000: device is behind an iommu
[   11.583531] es_vdec soc:video-decoder1@70100000: device is not dma coherent
[   11.590617] es_vdec soc:video-decoder1@70100000: device is behind an iommu
[   11.597601] [es_vdec:main]dec/pp kernel module.
[   11.602211] [es_vdec:main]Init multi core[0] at 0x        50100800
[   11.602211]  core[1] at 0x        50120800
[   11.602211]  core[2] at 0x        70100800
[   11.602211]  core[3] at 0x        70120800
[   11.602211]  IRQ_0=213
[   11.602211]  IRQ_1=214
[   11.602211]  IRQ_2=215
[   11.602211]  IRQ_3=216
[   11.630731] [es_vdec:main]create device node-es_vdec done
[   11.675202] dw-hdmi-eswin 702a0000.hdmi: got edid: width[64] x height[40]
[   11.770099] [es_vdec:vc]module init - vcore[0] addr =0x50100000, freq =800000000
[   11.777666] [es_vdec:vc]module init - vcore[1] addr =0x50120000, freq =800000000
[   11.785184] [es_vdec:vc]module init - vcore[2] addr =0x70100000, freq =800000000
[   11.792692] [es_vdec:vc]module init - vcore[3] addr =0x70120000, freq =800000000
[   11.801422] [es_vdec:vc]request mapped irq 213
[   11.806146] [es_vdec:vc]request IRQ <213> successfully for subsystem 0
[   11.812841] [es_vdec:vc]request mapped irq 214
[   11.818018] [es_vdec:vc]request IRQ <214> successfully for subsystem 1
[   11.824776] [es_vdec:vc]request mapped irq 215
[   11.830069] [es_vdec:vc]request IRQ <215> successfully for subsystem 2
[   11.836800] [es_vdec:vc]request mapped irq 216
[   11.841904] [es_vdec:vc]request IRQ <216> successfully for subsystem 3
[   11.848750] [es_vdec:vc]vcmd start completed, core_id = 0
[   11.859626] [es_vdec:vc]vcmd start completed, core_id = 1
[   11.867459] [es_vdec:main]module inserted. Major = 506
[   11.874834] [es_vdec:vc]check_dev_idle for core 0, vcmd_state = 3, exe_cnt = 0x2, rdy_cnt = 0x2
[   11.885887] [es_vdec:vc]check_dev_idle for core 1, vcmd_state = 3, exe_cnt = 0x2, rdy_cnt = 0x2
[   11.896988] eswin-pmu 51808000.power-controller: [D0_CODEC] enters power off process.
[   11.907004] eswin-pmu 51808000.power-controller: D0_CODEC power off tbu.
[   11.916081] eswin-pmu 51808000.power-controller: [D0_CODEC] ends power off process. 6 opened domains.
[   11.927702] [es_vdec:vc]check_dev_idle for core 2, vcmd_state = 0, exe_cnt = 0x0, rdy_cnt = 0x0
[   11.938695] [es_vdec:vc]check_dev_idle for core 3, vcmd_state = 0, exe_cnt = 0x0, rdy_cnt = 0x0
[   11.949782] eswin-pmu 71808000.power-controller: [D1_CODEC] enters power off process.
[   11.960022] eswin-pmu 71808000.power-controller: D1_CODEC power off tbu.
[   11.969029] eswin-pmu 71808000.power-controller: [D1_CODEC] ends power off process. 6 opened domains.
[   11.980633] [es_vdec:main]create proc fs.
[   11.986696] create file stat with mode 444
[   11.993081] [es_vdec:main]create proc vdec stat file success.
[   12.001694] Eswinenc soc:video-encoder@50110000: device is not dma coherent
[   12.011266] Eswinenc soc:video-encoder@50110000: Adding to iommu group 14
[   12.020821] Eswinenc soc:video-encoder@50110000: device is behind an iommu
[   12.030099] eswin-pmu 51808000.power-controller: [D0_CODEC] enters power-on process.
[   12.040193] eswin-pmu 51808000.power-controller: D0_CODEC power on tbu.
[   12.049054] eswin-pmu 51808000.power-controller: [D0_CODEC] ends power-on process. 7 opened domains.
[   12.062200] [es_venc:main][pid=63]initializing venc, numa id 0
[   12.071866] Eswinenc soc:video-encoder@50110000: EM: OPP:400000 is inefficient
[   12.081310] Eswinenc soc:video-encoder@50110000: EM: OPP:320000 is inefficient
[   12.090717] Eswinenc soc:video-encoder@50110000: EM: OPP:200000 is inefficient
[   12.100783] Eswinenc soc:video-encoder@50110000: EM: created perf domain
[   12.113462] Eswinenc soc:video-encoder@50110000: device is not dma coherent
[   12.122509] Eswinenc soc:video-encoder@50110000: device is behind an iommu
[   12.131599] [es_venc:main][pid=63]VENC: The first core loaded, waiting for another...
[   12.132272] Eswinenc soc:video-encoder@70110000: device is not dma coherent
[   12.151736] Eswinenc soc:video-encoder@70110000: Adding to iommu group 15
[   12.161066] Eswinenc soc:video-encoder@70110000: device is behind an iommu
[   12.170354] eswin-pmu 71808000.power-controller: [D1_CODEC] enters power-on process.
[   12.180417] eswin-pmu 71808000.power-controller: D1_CODEC power on tbu.
[   12.189270] eswin-pmu 71808000.power-controller: [D1_CODEC] ends power-on process. 7 opened domains.
[   12.202456] [es_venc:main][pid=63]initializing venc, numa id 1
[   12.211805] Eswinenc soc:video-encoder@70110000: EM: OPP:400000 is inefficient
[   12.221245] Eswinenc soc:video-encoder@70110000: EM: OPP:320000 is inefficient
[   12.230661] Eswinenc soc:video-encoder@70110000: EM: OPP:200000 is inefficient
[   12.240553] Eswinenc soc:video-encoder@70110000: EM: created perf domain
[   12.252948] Eswinenc soc:video-encoder@70110000: device is not dma coherent
[   12.262064] Eswinenc soc:video-encoder@70110000: device is behind an iommu
[   12.315890] [es_venc:vc][pid=63]Init: vcmd_buf_mem_pool.busAddress=0x1ffffe00000.
[   12.325604] [es_venc:vc][pid=63]Init: vcmd_buf_mem_pool.phy_address=0x100d00000.
[   12.335256] [es_venc:vc][pid=63]Init: vcmd_buf_mem_pool.virtualAddress=0xffff8f801c94c000.
[   12.350229] [es_venc:vc][pid=63]Init: vcmd_status_buf_mem_pool.busAddress=0x1ffffc00000.
[   12.362427] [es_venc:vc][pid=63]Init: vcmd_status_buf_mem_pool.phy_address=0x100f00000.
[   12.374448] [es_venc:vc][pid=63]Init: vcmd_status_buf_mem_pool.virtualAddress=0xffff8f801cb4d000.
[   12.391291] [es_venc:vc][pid=63]Init: vcmd_registers_mem_pool.busAddress=0x1ffffa00000.
[   12.403193] [es_venc:vc][pid=63]Init: vcmd_registers_mem_pool.phy_address=0x101100000.
[   12.415080] [es_venc:vc][pid=63]Init: vcmd_registers_mem_pool.virtualAddress=0xffff8f801cd4e000.
[   12.427846] [es_venc:vc][pid=63]module init - vcore[0] addr =0x50110000, freq =800000000
[   12.439663] [es_venc:vc][pid=63]module init - vcore[1] addr =0x50130000, freq =800000000
[   12.451688] [es_venc:vc][pid=63]module init - vcore[2] addr =0x70110000, freq =800000000
[   12.463712] [es_venc:vc][pid=63]module init - vcore[3] addr =0x70130000, freq =800000000
[   12.476102] [es_venc:vc]create device node-es_venc done
[   12.485389] [es_venc:vc][pid=63]module inserted. Major <505>
[   12.494938] [es_venc:vc][pid=63]link_and_run_cmdbuf, restart vcmd, cmdbuf_id = 1, restart_cmdbuf_id = 65535
[   12.508659] [es_venc:vc][pid=63]vcmd start completed
[   12.517631] [es_venc:vc][pid=63]link_and_run_cmdbuf, restart vcmd, cmdbuf_id = 3, restart_cmdbuf_id = 65535
[   12.531176] [es_venc:vc][pid=63]vcmd start completed
[   12.540386] [es_venc:vc][pid=168]vcmd kthread enter
[   12.540438] eswin-pmu 51808000.power-controller: [D0_CODEC] enters power off process.
[   12.561239] eswin-pmu 51808000.power-controller: D0_CODEC power off tbu.
[   12.571970] eswin-pmu 51808000.power-controller: [D0_CODEC] ends power off process. 6 opened domains.
[   12.585329] eswin-pmu 71808000.power-controller: [D1_CODEC] enters power off process.
[   12.597304] eswin-pmu 71808000.power-controller: D1_CODEC power off tbu.
[   12.608136] eswin-pmu 71808000.power-controller: [D1_CODEC] ends power off process. 6 opened domains.
[   12.621266] [es_venc:main][pid=63]create proc fs.
[   12.630071] create file stat with mode 444
[   12.638274] [es_venc:main][pid=63]create proc venc stat file success.
[   12.649090] es_hae 50140000.g2d: device is not dma coherent
[   12.658872] es_hae 50140000.g2d: device is not behind an iommu
[   12.668660] eswin-pmu 51808000.power-controller: [D0_CODEC] enters power-on process.
[   12.680605] eswin-pmu 51808000.power-controller: D0_CODEC power on tbu.
[   12.691405] eswin-pmu 51808000.power-controller: [D0_CODEC] ends power-on process. 7 opened domains.
[   12.705505] base_addr:51828000,vc_aclk=0x00000021,vc_clken=0x00000000,g2d=0x00000020,vc rst=0x00000007,g2d rst=0x00000007
[   12.724546] hae loaded first device, waiting for another...
[   12.734666] es_hae 70140000.g2d: device is not dma coherent
[   12.744548] es_hae 70140000.g2d: device is not behind an iommu
[   12.754540] eswin-pmu 71808000.power-controller: [D1_CODEC] enters power-on process.
[   12.766603] eswin-pmu 71808000.power-controller: D1_CODEC power on tbu.
[   12.777550] eswin-pmu 71808000.power-controller: [D1_CODEC] ends power-on process. 7 opened domains.
[   12.791788] base_addr:71828000,vc_aclk=0x00000021,vc_clken=0x00000000,g2d=0x00000020,vc rst=0x00000007,g2d rst=0x00000007
[   12.807272] [gpu_add_power_domains:470] num_domains: 2
[   12.816858] [gpu_add_power_domains:477] add dev opp table[0]: (____ptrval____)
[   12.829080] es_hae 50140000.g2d: EM: OPP:520000 is inefficient
[   12.839367] es_hae 50140000.g2d: EM: OPP:260000 is inefficient
[   12.849491] es_hae 50140000.g2d: EM: created perf domain
[   12.866183] [gpu_add_power_domains:505] pm runtime enable dev[0]: (____ptrval____)
[   12.878322] [gpu_add_power_domains:477] add dev opp table[1]: (____ptrval____)
[   12.890352] es_hae 70140000.g2d: EM: OPP:520000 is inefficient
[   12.900621] es_hae 70140000.g2d: EM: OPP:260000 is inefficient
[   12.911052] es_hae 70140000.g2d: EM: created perf domain
[   12.927682] [gpu_add_power_domains:505] pm runtime enable dev[1]: (____ptrval____)
[   12.939583] es_hae version 6.4.14.3.653784
[   12.969834] mtlb physical: 0xdac00000
[   13.406008] create file stat with mode 444
[   13.416486] llc_spram 51c00000.llc: device is not dma coherent
[   13.426610] llc_spram 51c00000.llc: device is not behind an iommu
[   13.437105] llc_spram 51c00000.llc: llc_probe start!
[   13.447521] llc_spram 51c00000.llc: res_spram.start=0x59000000, max_size=0x400000, configured size=0x400000
[   13.463188] llc_spram 51c00000.llc: [0x178]=0xc0000020 [0x17c]=0x80000220 [0x180]=0x80002122 [0x184]=0x80000020 [0x418]=0x00000047
[   13.575401] llc_spram 51c00000.llc: devm_llc_ops_register, done sucessfully!
[   13.586965] llc_spram 51c00000.llc: SRAM pool: 4096 KiB @ vaddr 0xffff8f801e800000, phys 0x59000000
[   13.600478] llc_spram 51c00000.llc: __add_spram_heap, Done adding spram heap name:llc_spram0
[   13.613294] llc_spram 51c00000.llc: llc_probe Done!
[   13.622704] llc_spram 71c00000.llc: device is not dma coherent
[   13.632873] llc_spram 71c00000.llc: device is not behind an iommu
[   13.643289] llc_spram 71c00000.llc: llc_probe start!
[   13.652591] llc_spram 71c00000.llc: res_spram.start=0x79000000, max_size=0x400000, configured size=0x400000
[   13.668012] llc_spram 71c00000.llc: [0x178]=0xc0000020 [0x17c]=0x80000220 [0x180]=0x80002122 [0x184]=0x80000020 [0x418]=0x00000047
[   13.755380] llc_spram 71c00000.llc: devm_llc_ops_register, done sucessfully!
[   13.766944] llc_spram 71c00000.llc: SRAM pool: 4096 KiB @ vaddr 0xffff8f801f800000, phys 0x79000000
[   13.780453] llc_spram 71c00000.llc: __add_spram_heap, Done adding spram heap name:llc_spram1
[   13.793279] llc_spram 71c00000.llc: llc_probe Done!
[   13.802704] asoc-audio-graph-card soc:graphcard1: device is not dma coherent
[   13.814161] asoc-audio-graph-card soc:graphcard1: device is not behind an iommu
[   13.826426] asoc-audio-graph-card soc:graphcard4: device is not dma coherent
[   13.837830] asoc-audio-graph-card soc:graphcard4: device is not behind an iommu
[   13.849824] es-i2s 50200000.i2s0: device is not dma coherent
[   13.859766] es-i2s 50200000.i2s0: device is not behind an iommu
[   13.869962] es-i2s 50200000.i2s0: dev name:i2s0
[   13.878827] es-i2s 50200000.i2s0: nid:0
[   13.887713] es-i2s 50200000.i2s0: comp1:0x24c007e, comp2:0x48c
[   13.895447] es_hae 70140000.g2d: sys set rate from 4294967295Hz to 1040000000Hz
[   13.898324] es_audio_proc:initialized
[   13.918263] es-i2s 50210000.i2s1: device is not dma coherent
[   13.928232] es-i2s 50210000.i2s1: device is not behind an iommu
[   13.938463] es-i2s 50210000.i2s1: dev name:i2s1
[   13.947206] es-i2s 50210000.i2s1: nid:0
[   13.955928] es-i2s 50210000.i2s1: comp1:0x24c007e, comp2:0x48c
[   13.966398] es-i2s 70200000.i2s0: device is not dma coherent
[   13.976308] es-i2s 70200000.i2s0: device is not behind an iommu
[   13.986464] es-i2s 70200000.i2s0: dev name:i2s0
[   13.995292] es-i2s 70200000.i2s0: nid:1
[   14.004332] es-i2s 70200000.i2s0: comp1:0x24c007e, comp2:0x48c
[   14.014639] eswin-pcie 54000000.pcie: device is not dma coherent
[   14.025447] eswin-pcie 54000000.pcie: Adding to iommu group 16
[   14.035649] eswin-pcie 54000000.pcie: device is behind an iommu
[   14.046297] eswin-pcie 54000000.pcie: host bridge /soc/pcie@0x54000000 ranges:
[   14.057816] eswin-pcie 54000000.pcie:       IO 0x0040800000..0x0040ffffff -> 0x0040800000
[   14.070266] eswin-pcie 54000000.pcie:      MEM 0x0041000000..0x004fffffff -> 0x0041000000
[   14.082670] eswin-pcie 54000000.pcie:      MEM 0x8000000000..0x81ffffffff -> 0x8000000000
[   14.215734] eswin-pcie 54000000.pcie: iATU: unroll T, 8 ob, 4 ib, align 4K, limit 8G
[   14.327379] eswin-pcie 54000000.pcie: PCIe Gen.3 x4 link up
[   14.343271] eswin-pcie 54000000.pcie: PCI host bridge to bus 0000:00
[   14.353945] pci_bus 0000:00: root bus resource [bus 00-ff]
[   14.363664] pci_bus 0000:00: root bus resource [io  0x0000-0x7fffff] (bus address [0x40800000-0x40ffffff])
[   14.377576] pci_bus 0000:00: root bus resource [mem 0x41000000-0x4fffffff]
[   14.388685] pci_bus 0000:00: root bus resource [mem 0x8000000000-0x81ffffffff pref]
[   14.400605] pci 0000:00:00.0: [1fe1:2030] type 01 class 0x060400
[   14.410882] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x07ffffff]
[   14.421390] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x000fffff]
[   14.432012] pci 0000:00:00.0: supports D1 D2
[   14.440511] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[   14.525266] pci 0000:01:00.0: [1e49:0071] type 00 class 0x010802
[   14.535716] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[   14.546807] pci 0000:01:00.0: Max Payload Size set to 512 (was 128, max 512)
[   14.558435] pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[   14.591419] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   14.602421] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4fffffff]
[   14.613512] pci 0000:00:00.0: BAR 1: assigned [mem 0x41000000-0x410fffff]
[   14.624579] pci 0000:00:00.0: BAR 8: assigned [mem 0x41100000-0x411fffff]
[   14.635660] pci 0000:01:00.0: BAR 0: assigned [mem 0x41100000-0x41103fff 64bit]
[   14.647251] pci 0000:00:00.0: PCI bridge to [bus 01]
[   14.656408] pci 0000:00:00.0:   bridge window [mem 0x41100000-0x411fffff]
[   14.667519] pcieport 0000:00:00.0: device is not dma coherent
[   14.677729] pcieport 0000:00:00.0: Adding to iommu group 17
[   14.687577] pcieport 0000:00:00.0: device is behind an iommu
[   14.841610] pcieport 0000:00:00.0: PME: Signaling with IRQ 227
[   14.852085] pcieport 0000:00:00.0: AER: enabled with IRQ 227
[   15.029481] nvme 0000:01:00.0: device is not dma coherent
[   15.039448] nvme 0000:01:00.0: Adding to iommu group 17
[   15.048752] nvme 0000:01:00.0: device is behind an iommu
[   15.217170] nvme nvme0: pci function 0000:01:00.0
[   15.226125] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[   15.417419] hwmon hwmon9: temp1_input not attached to any thermal zone
[   15.431173] hwmon hwmon9: temp2_input not attached to any thermal zone
[   15.444704] hwmon hwmon9: temp3_input not attached to any thermal zone
[   15.502553] nvme nvme0: allocated 40 MiB host memory buffer.
[   15.687482] nvme nvme0: 8/0/0 default/read/poll queues
[   15.871308]  nvme0n1: p1 p2 p3
[   16.046934] eswin-pinctrl 71600080.pinctrl: unsupported configuration parameter '17'
[   16.058846] eswin-pinctrl 71600080.pinctrl: unsupported configuration parameter '17'
[   16.070635] eswin-pcie 74000000.pcie: device is not dma coherent
[   16.227109] eswin-pcie 74000000.pcie: Adding to iommu group 18
[   16.237362] eswin-pcie 74000000.pcie: device is behind an iommu
[   16.247800] eswin-pcie 74000000.pcie: host bridge /soc/pcie@0x74000000 ranges:
[   16.259087] eswin-pcie 74000000.pcie:       IO 0x0060800000..0x0060ffffff -> 0x0060800000
[   16.271289] eswin-pcie 74000000.pcie:      MEM 0x0061000000..0x006fffffff -> 0x0061000000
[   16.283474] eswin-pcie 74000000.pcie:      MEM 0xa000000000..0xa1ffffffff -> 0xa000000000
[   16.415915] eswin-pcie 74000000.pcie: iATU: unroll T, 8 ob, 4 ib, align 4K, limit 8G
[   16.527383] eswin-pcie 74000000.pcie: PCIe Gen.2 x1 link up
[   16.537280] eswin-pcie 74000000.pcie: PCI host bridge to bus 0001:00
[   16.547613] pci_bus 0001:00: root bus resource [bus 00-ff]
[   16.557095] pci_bus 0001:00: root bus resource [io  0x800000-0xffffff] (bus address [0x60800000-0x60ffffff])
[   16.570941] pci_bus 0001:00: root bus resource [mem 0x61000000-0x6fffffff]
[   16.581803] pci_bus 0001:00: root bus resource [mem 0xa000000000-0xa1ffffffff pref]
[   16.593459] pci 0001:00:00.0: [1fe1:2030] type 01 class 0x060400
[   16.603334] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x07ffffff]
[   16.613550] pci 0001:00:00.0: reg 0x14: [mem 0x00000000-0x000fffff]
[   16.623867] pci 0001:00:00.0: supports D1 D2
[   16.631999] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[   16.716590] pci 0001:01:00.0: [8086:2723] type 00 class 0x028000
[   16.726827] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[   16.737793] pci 0001:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 512, max 512)
[   16.750357] pci 0001:01:00.0: Max Payload Size set to 128 (was 128, max 128)
[   16.761852] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[   16.783515] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[   16.794055] pci 0001:00:00.0: BAR 0: assigned [mem 0x68000000-0x6fffffff]
[   16.804761] pci 0001:00:00.0: BAR 1: assigned [mem 0x61000000-0x610fffff]
[   16.815406] pci 0001:00:00.0: BAR 8: assigned [mem 0x61100000-0x611fffff]
[   16.826033] pci 0001:01:00.0: BAR 0: assigned [mem 0x61100000-0x61103fff 64bit]
[   16.837251] pci 0001:00:00.0: PCI bridge to [bus 01]
[   16.846001] pci 0001:00:00.0:   bridge window [mem 0x61100000-0x611fffff]
[   16.856713] pcieport 0001:00:00.0: device is not dma coherent
[   16.867158] pcieport 0001:00:00.0: Adding to iommu group 19
[   16.876827] pcieport 0001:00:00.0: device is behind an iommu
[   16.889307] pcieport 0001:00:00.0: PME: Signaling with IRQ 239
[   16.898107] pcieport 0001:00:00.0: AER: enabled with IRQ 239
[   16.906524] asoc-audio-graph-card soc:graphcard1: device is not dma coherent
[   16.917432] asoc-audio-graph-card soc:graphcard1: device is not behind an iommu
[   17.243891] debugfs: Directory '50210000.i2s1' with parent 'ES8326 Audio' already present!
[   17.427567] input: ES8326 Audio Headphone as /devices/platform/soc/soc:graphcard1/sound/card0/input0
[   17.441269] asoc-audio-graph-card soc:graphcard4: device is not dma coherent
[   17.452188] asoc-audio-graph-card soc:graphcard4: device is not behind an iommu
[   17.463768] debugfs: Directory '70200000.i2s0' with parent 'HDMI Audio-1' already present!
[   17.484675] eswin_spi_mmio 51800000.spi: device is not dma coherent
[   17.494980] eswin_spi_mmio 51800000.spi: device is not behind an iommu
[   17.506138] spi-dma: esw_spi_dma_init_generic init success
[   17.516302] spi-nor spi2.0: w25q128fw (16384 Kbytes)
[   17.530765] eswin_spi_mmio 71800000.spi: device is not dma coherent
[   17.541107] eswin_spi_mmio 71800000.spi: device is not behind an iommu
[   17.552427] spi-dma: esw_spi_dma_init_generic init success
[   17.562619] spi-nor spi3.0: w25q128fw (16384 Kbytes)
[   17.578524] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   17.586463] eswin-sdhci-sdio 50460000.mmc: device is not dma coherent
[   17.597532] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   17.599212] eswin-sdhci-sdio 50460000.mmc: Adding to iommu group 20
[   17.605017] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   17.611496] eswin-sdhci-sdio 50460000.mmc: device is behind an iommu
[   17.619795] clk: Not disabling unused clocks
[   17.649599] eswin-pmu 71808000.power-controller: [D1_DSP3] enters power off process.
[   17.651398] ALSA device list:
[   17.657376] eswin-pmu 71808000.power-controller: D1_DSP3 power off tbu.
[   17.660328]   #0: ES8326 Audio
[   17.666956] eswin-pmu 71808000.power-controller: [D1_DSP3] ends power off process. 6 opened domains.
[   17.670001]   #1: HDMI Audio-1
[   17.675993] eswin-pmu 51808000.power-controller: [D0_CODEC] enters power off process.
[   17.676036] eswin-pmu 51808000.power-controller: D0_CODEC power off tbu.
[   17.676047] eswin-pmu 51808000.power-controller: [D0_CODEC] ends power off process. 6 opened domains.
[   17.679147] eswin-pmu 71808000.power-controller: [D1_DSP2] enters power off process.
[   17.683409] mmc0: SDHCI controller on 50460000.mmc [50460000.mmc] using ADMA 64-bit
[   17.690036] eswin-pmu 71808000.power-controller: D1_DSP2 power off tbu.
[   17.690053] eswin-pmu 71808000.power-controller: [D1_DSP2] ends power off process. 5 opened domains.
[   17.690067] eswin-pmu 71808000.power-controller: [D1_VI] enters power off process.
[   17.690083] eswin-pmu 71808000.power-controller: D1_VI power off tbu.
[   17.813659] eswin-pmu 71808000.power-controller: [D1_VI] ends power off process. 4 opened domains.
[   17.824539] Freeing unused kernel image (initmem) memory: 7540K
[   17.826953] eswin-pmu 71808000.power-controller: [D1_DSP1] enters power off process.
[   17.849002] eswin-pmu 71808000.power-controller: D1_DSP1 power off tbu.
[   17.859916] eswin-pmu 71808000.power-controller: [D1_DSP1] ends power off process. 3 opened domains.
[   17.867686] Checked W+X mappings: passed, no W+X pages found
[   17.869131] eswin-pmu 51808000.power-controller: [D0_DSP3] enters power off process.
[   17.874755] Run /init as init process
[   17.876392] eswin-pmu 71808000.power-controller: [D1_CODEC] enters power off process.
[   17.876426] eswin-pmu 71808000.power-controller: D1_CODEC power off tbu.
[   17.876437] eswin-pmu 71808000.power-controller: [D1_CODEC] ends power off process. 2 opened domains.
[   17.882573] eswin-pmu 51808000.power-controller: D0_DSP3 power off tbu.
[   17.886165]   with arguments:
[   17.886169]     /init
[   17.886171]     splash
[   17.886174]   with environment:
[   17.886176]     HOME=/
[   17.886178]     TERM=linux
[   17.886180]     BOOT_IMAGE=/boot/vmlinuz-6.6.92-eic7x-2025.07
[   17.894031] eswin-pmu 51808000.power-controller: [D0_DSP3] ends power off process. 5 opened domains.
[   17.900710]     disable_bypass=false
[   18.023521] eswin-pmu 51808000.power-controller: [D0_DSP2] enters power off process.
[   18.035781] eswin-pmu 51808000.power-controller: D0_DSP2 power off tbu.
[   18.046844] eswin-pmu 51808000.power-controller: [D0_DSP2] ends power off process. 4 opened domains.
[   18.060463] eswin-pmu 51808000.power-controller: [D0_VI] enters power off process.
[   18.072504] eswin-pmu 51808000.power-controller: D0_VI power off tbu.
[   18.083481] eswin-pmu 51808000.power-controller: [D0_VI] ends power off process. 3 opened domains.
[   18.096990] eswin-pmu 51808000.power-controller: [D0_DSP1] enters power off process.
[   18.109335] eswin-pmu 51808000.power-controller: D0_DSP1 power off tbu.
[   18.120349] eswin-pmu 51808000.power-controller: [D0_DSP1] ends power off process. 2 opened domains.
root-15019: recovering journal
root-15019: clean, 162128/62008416 files, 12772808/249475665 blocks
[   19.721058] EXT4-fs (nvme0n1p3): mounted filesystem 5d06e2e5-c490-4e08-808c-aae07656b13c ro with ordered data mode. Quota mode: none.
[   20.083472] systemd[1]: System time before build time, advancing clock.
[   20.109415] systemd[1]: Inserted module 'autofs4'
[   20.222588] NET: Registered PF_INET6 protocol family
[   20.270855] Segment Routing with IPv6
[   20.279212] RPL Segment Routing with IPv6
[   20.287825] In-situ OAM (IOAM) with IPv6
[   20.324635] systemd[1]: systemd 255.4-1ubuntu8.10 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[   20.367301] systemd[1]: Detected architecture riscv64.
[   20.379944] systemd[1]: Hostname set to .
[   20.684882] systemd[1]: Configuration file /etc/systemd/system/auto_model.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[   21.008681] systemd[1]: Queued start job for default target graphical.target.
[   21.222745] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[   21.266224] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[   21.281437] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[   21.297558] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[   21.313637] systemd[1]: Created slice user.slice - User and Session Slice.
[   21.328170] systemd[1]: Created slice user-1000.slice - User Slice of UID 1000.
[   21.341223] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[   21.357984] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[   21.374880] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[   21.392942] systemd[1]: Expecting device dev-disk-by\x2dlabel-boot\x2d15019.device - /dev/disk/by-label/boot-15019...
[   21.408930] systemd[1]: Expecting device dev-disk-by\x2dlabel-swap\x2d15019.device - /dev/disk/by-label/swap-15019...
[   21.424921] systemd[1]: Expecting device dev-hvc0.device - /dev/hvc0...
[   21.436944] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0...
[   21.449167] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[   21.462362] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[   21.476874] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[   21.490902] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[   21.503721] systemd[1]: Reached target slices.target - Slice Units.
[   21.515635] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[   21.530405] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[   21.545148] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[   21.560318] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[   21.575641] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[   21.588499] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   21.609703] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[   21.624204] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[   21.943954] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[   21.961740] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[   21.979990] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[   22.006085] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[   22.032288] systemd[1]: Starting systemd-journald.service - Journal Service...
[   22.050368] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[   22.069955] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[   22.099536] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[   22.118293] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[   22.132530] systemd-journald[313]: Collecting audit messages is disabled.
[   22.140346] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[   22.164219] device-mapper: uevent: version 1.0.3
[   22.168399] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[   22.179510] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[   22.193022] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[   22.214830] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[   22.252195] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[   22.261958] fuse: init (API version 7.39)
[   22.266078] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   22.300936] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[   22.316296] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   22.337511] eswin-dsp 52280400.dsp_subsys:es_dsp@0: device is not dma coherent
[   22.350521] eswin-dsp 52280400.dsp_subsys:es_dsp@0: Adding to iommu group 21
[   22.352401] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[   22.357682] eswin-dsp 52280400.dsp_subsys:es_dsp@0: device is behind an iommu
[   22.380249] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[   22.389579] eswin-dsp 52280400.dsp_subsys:es_dsp@0: EM: created perf domain
[   22.393548] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[   22.406266] eswin-dsp 52280400.dsp_subsys:es_dsp@0:
[   22.406266]
[   22.406266] dsp hw init begin
[   22.408071] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[   22.447655] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[   22.461271] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[   22.470737] eswin-dsp 52280400.dsp_subsys:es_dsp@1: device is not dma coherent
[   22.477306] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   22.480805] eswin-dsp 52280400.dsp_subsys:es_dsp@1: Adding to iommu group 22
[   22.489333] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[   22.494909] eswin-dsp 52280400.dsp_subsys:es_dsp@1: device is behind an iommu
[   22.495103] eswin-pmu 51808000.power-controller: [D0_DSP1] enters power-on process.
[   22.506227] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[   22.510324] eswin-pmu 51808000.power-controller: D0_DSP1 power on tbu.
[   22.510330] eswin-pmu 51808000.power-controller: [D0_DSP1] ends power-on process. 3 opened domains.
[   22.514507] eswin-dsp 52280400.dsp_subsys:es_dsp@1: EM: created perf domain
[   22.519759] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[   22.531868] eswin-dsp 52280400.dsp_subsys:es_dsp@1:
[   22.531868]
[   22.531868] dsp hw init begin
[   22.537922] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   22.592077] eswin-dsp 52280400.dsp_subsys:es_dsp@2: device is not dma coherent
[   22.596675] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[   22.601956] eswin-dsp 52280400.dsp_subsys:es_dsp@2: Adding to iommu group 23
[   22.612451] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[   22.616335] eswin-dsp 52280400.dsp_subsys:es_dsp@2: device is behind an iommu
[   22.625157] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[   22.630858] eswin-pmu 51808000.power-controller: [D0_DSP2] enters power-on process.
[   22.642498] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   22.647041] eswin-pmu 51808000.power-controller: D0_DSP2 power on tbu.
[   22.647047] eswin-pmu 51808000.power-controller: [D0_DSP2] ends power-on process. 4 opened domains.
[   22.651247] eswin-dsp 52280400.dsp_subsys:es_dsp@2: EM: created perf domain
[   22.655493] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[   22.667436] eswin-dsp 52280400.dsp_subsys:es_dsp@2:
[   22.667436]
[   22.667436] dsp hw init begin
[   22.672914] systemd[1]: modprobe@loop.service: Deactivated successfully.
[   22.719919] eswin-dsp 52280400.dsp_subsys:es_dsp@3: device is not dma coherent
[   22.723459] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[   22.728739] eswin-dsp 52280400.dsp_subsys:es_dsp@3: Adding to iommu group 24
[   22.728850] eswin-dsp 52280400.dsp_subsys:es_dsp@3: device is behind an iommu
[   22.753704] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[   22.756689] EXT4-fs (nvme0n1p3): re-mounted 5d06e2e5-c490-4e08-808c-aae07656b13c r/w. Quota mode: none.
[   22.759259] eswin-pmu 51808000.power-controller: [D0_DSP3] enters power-on process.
[   22.759280] eswin-pmu 51808000.power-controller: D0_DSP3 power on tbu.
[   22.759282] eswin-pmu 51808000.power-controller: [D0_DSP3] ends power-on process. 5 opened domains.
[   22.763335] eswin-dsp 52280400.dsp_subsys:es_dsp@3: EM: created perf domain
[   22.770272] eswin-dsp 52280400.dsp_subsys:es_dsp@3:
[   22.770272]
[   22.770272] dsp hw init begin
[   22.773567] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[   22.774240] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[   22.783258] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[   22.836507] eswin-dsp 72280400.dsp_subsys:es_dsp@0: device is not dma coherent
[   22.848675] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[   22.852450] eswin-dsp 72280400.dsp_subsys:es_dsp@0: Adding to iommu group 25
[   22.887111] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[   22.892046] eswin-dsp 72280400.dsp_subsys:es_dsp@0: device is behind an iommu
[   22.899530] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[   22.937913] eswin-dsp 72280400.dsp_subsys:es_dsp@0: EM: created perf domain
[   22.950011] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[   22.958308] eswin-dsp 72280400.dsp_subsys:es_dsp@0:
[   22.958308]
[   22.958308] dsp hw init begin
[   22.960662] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   23.102355] eswin-dsp 72280400.dsp_subsys:es_dsp@1: device is not dma coherent
[   23.105561] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[   23.109699] eswin-dsp 72280400.dsp_subsys:es_dsp@1: Adding to iommu group 26
[   23.119343] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[   23.125209] eswin-dsp 72280400.dsp_subsys:es_dsp@1: device is behind an iommu
[   23.170507] eswin-pmu 71808000.power-controller: [D1_DSP1] enters power-on process.
[   23.184091] eswin-pmu 71808000.power-controller: D1_DSP1 power on tbu.
[   23.196492] eswin-pmu 71808000.power-controller: [D1_DSP1] ends power-on process. 3 opened domains.
[   23.237554] eswin-dsp 72280400.dsp_subsys:es_dsp@1: EM: created perf domain
[   23.249327] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[   23.256844] eswin-dsp 72280400.dsp_subsys:es_dsp@1:
[   23.256844]
[   23.256844] dsp hw init begin
[   23.263266] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[   23.307517] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[   23.393985] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[   23.408050] eswin-dsp 72280400.dsp_subsys:es_dsp@2: device is not dma coherent
[   23.408246] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[   23.415368] eswin-dsp 72280400.dsp_subsys:es_dsp@2: Adding to iommu group 27
[   23.436277] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[   23.437600] eswin-dsp 72280400.dsp_subsys:es_dsp@2: device is behind an iommu
[   23.466973] systemd[1]: Started systemd-journald.service - Journal Service.
[   23.472155] eswin-pmu 71808000.power-controller: [D1_DSP2] enters power-on process.
[   23.504566] eswin-pmu 71808000.power-controller: D1_DSP2 power on tbu.
[   23.504570] eswin-pmu 71808000.power-controller: [D1_DSP2] ends power-on process. 4 opened domains.
[   23.528779] eswin-dsp 72280400.dsp_subsys:es_dsp@2: EM: created perf domain
[   23.547937] eswin-dsp 72280400.dsp_subsys:es_dsp@2:
[   23.547937]
[   23.547937] dsp hw init begin
[   23.619842] systemd-journald[313]: Received client request to flush runtime journal.
[   23.636531] systemd-journald[313]: File /var/log/journal/c37116c64bd287ace673f7e068d619ff/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   23.704415] eswin-dsp 72280400.dsp_subsys:es_dsp@3: device is not dma coherent
[   23.717860] eswin-dsp 72280400.dsp_subsys:es_dsp@3: Adding to iommu group 28
[   23.730984] eswin-dsp 72280400.dsp_subsys:es_dsp@3: device is behind an iommu
[   23.744063] eswin-pmu 71808000.power-controller: [D1_DSP3] enters power-on process.
[   23.757482] eswin-pmu 71808000.power-controller: D1_DSP3 power on tbu.
[   23.769728] eswin-pmu 71808000.power-controller: [D1_DSP3] ends power-on process. 5 opened domains.
[   23.810679] eswin-dsp 72280400.dsp_subsys:es_dsp@3: EM: created perf domain
[   23.829779] eswin-dsp 72280400.dsp_subsys:es_dsp@3:
[   23.829779]
[   23.829779] dsp hw init begin
[   24.035794] eswin_npu 51c00000.eswin-npu: device is not dma coherent
[   24.048147] eswin_npu 51c00000.eswin-npu: Adding to iommu group 29
[   24.060108] eswin_npu 51c00000.eswin-npu: device is behind an iommu
[   24.072134] Probe Eswin NPU.
[   24.105802] eswin_npu 51c00000.eswin-npu: EM: created perf domain
[   24.172853] nim file total_len:77100, num_descriptors:4
[   24.183809] Parse bootloader entry from memory address:ffff8f801f781000
[   24.196105] E31 bootloader entry_addr=ffff8f801f782044, bootloader length=128.
[   24.209061] nim file total_len:77100, num_descriptors:4
[   24.219930] Load ELF from memory address:ffff8f801f781000 to cpu address:ffff8f80487d8000
[   24.233825] Start to load E31(0) elf to address:ffff8f801f782330
[   24.245733] Start to load E31(1) elf to address:ffff8f801f78a290
[   24.257622] Start to load E31(2) elf to address:ffff8f801f78f3f0
[   24.269547] Start to load E31(3) elf to address:ffff8f801f78f3f0
[   24.281347] Start to load E31(4) elf to address:ffff8f801f78f3f0
[   24.293136] Start to load E31(5) elf to address:ffff8f801f78f3f0
[   24.304755] Start to load E31(6) elf to address:ffff8f801f78f3f0
[   24.316509] Start to load E31(7) elf to address:ffff8f801f78f3f0
[   24.328013] Start to load E31(8) elf to address:ffff8f801f78f3f0
[   24.339517] Start to load E31(9) elf to address:ffff8f801f78f3f0
[   24.350907] Load image done.
[   24.367377] E31(0) validation passed
[   24.376246] E31(1) validation passed
[   24.385139] E31(2) validation passed
[   24.393985] E31(3) validation passed
[   24.402837] E31(4) validation passed
[   24.411672] E31(5) validation passed
[   24.420395] E31(6) validation passed
[   24.429147] E31(7) validation passed
[   24.437918] E31(8) validation passed
[   24.446647] E31(9) validation passed
[   24.463924] eswin_npu 51c00000.eswin-npu: win_engine 0xffffaf80d1b2f840
[   24.476987] eswin_npu 71c00000.eswin-npu: device is not dma coherent
[   24.488617] eswin_npu 71c00000.eswin-npu: Adding to iommu group 30
[   24.500178] eswin_npu 71c00000.eswin-npu: device is behind an iommu
[   24.511652] Probe Eswin NPU.
[   24.631580] eswin_npu 71c00000.eswin-npu: EM: created perf domain
[   24.687942] nim file total_len:77100, num_descriptors:4
[   24.696053] Parse bootloader entry from memory address:ffff8f801ef21000
[   24.705535] E31 bootloader entry_addr=ffff8f801ef22044, bootloader length=128.
[   24.715639] nim file total_len:77100, num_descriptors:4
[   24.723753] Load ELF from memory address:ffff8f801ef21000 to cpu address:ffff8f80587d8000
[   24.735067] Start to load E31(0) elf to address:ffff8f801ef22330
[   24.744454] Start to load E31(1) elf to address:ffff8f801ef2a290
[   24.753581] Start to load E31(2) elf to address:ffff8f801ef2f3f0
[   24.762531] Start to load E31(3) elf to address:ffff8f801ef2f3f0
[   24.771537] Start to load E31(4) elf to address:ffff8f801ef2f3f0
[   24.780374] Start to load E31(5) elf to address:ffff8f801ef2f3f0
[   24.789218] Start to load E31(6) elf to address:ffff8f801ef2f3f0
[   24.798015] Start to load E31(7) elf to address:ffff8f801ef2f3f0
[   24.806636] Start to load E31(8) elf to address:ffff8f801ef2f3f0
[   24.815263] Start to load E31(9) elf to address:ffff8f801ef2f3f0
[   24.823957] Load image done.
[   24.841529] E31(0) validation passed
[   24.847556] E31(1) validation passed
[   24.853398] E31(2) validation passed
[   24.859254] E31(3) validation passed
[   24.865225] E31(4) validation passed
[   24.870966] E31(5) validation passed
[   24.876824] E31(6) validation passed
[   24.882509] E31(7) validation passed
[   24.888303] E31(8) validation passed
[   24.894103] E31(9) validation passed
[   24.988431] eswin_npu 71c00000.eswin-npu: win_engine 0xffffaf9fd18bb840
[   25.536076] eswin-pinctrl 51600080.pinctrl: unsupported configuration parameter '17'
[   25.570627] spi_master spi0: will run message pump with realtime priority
[   25.729262] cros-ec-spi spi0.0: Chrome EC device registered
[   25.870149] Intel(R) Wireless WiFi driver for Linux
[   25.883245] iwlwifi 0001:01:00.0: device is not dma coherent
[   25.907653] iwlwifi 0001:01:00.0: Adding to iommu group 19
[   25.918287] iwlwifi 0001:01:00.0: device is behind an iommu
[   25.936648] usbcore: registered new device driver onboard-usb-hub
[   25.957997] iwlwifi 0001:01:00.0: enabling device (0000 -> 0002)
[   25.965413] Adding 2095668k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:2095668k SS
[   25.989911] usb 3-1.3.4: USB disconnect, device number 5
[   29.843462] cros-ec-bat cros-ec-bat.23.auto: error -ENODEV: Failed to get present status
[   31.778164] Bluetooth: hci0: Malformed MSFT vendor event: 0x02

Ubuntu 24.04.3 LTS roma ttyS0

roma login:
Ubuntu 24.04.3 LTS roma hvc0

roma login: roma
Password:
Welcome to Ubuntu 24.04.3 LTS (GNU/Linux 6.6.92-eic7x-2025.07 riscv64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/pro

This system has been minimized by removing packages and content that are
not required on a system that users do not log into.

To restore this content, you can run the 'unminimize' command.
[?2004hroma@roma:~$ pwd
[?2004l/home/roma
[?2004hroma@roma:~$ ls
[?2004lDesktop    Downloads  ollama-deepseek7b.html  Public	       Templates
Documents  Music      Pictures		      start-server.sh  Videos
[?2004hroma@roma:~$ poweroff
[?2004l[0;1;31mCall to PowerOff failed: Interactive authentication required.[0m
[?2004hroma@roma:~$ sudo poweroff
[?2004l[sudo] password for roma:

Broadcast message from root@roma on pts/0 (Sat 2025-10-11 14:01:59 CST):

The system will power off now!

[?2004hroma@roma:~$ [?2004l[  127.844765] Error: directory hae is not empty!
[  127.853686] base_addr:51828000,vc_aclk=0x00000021,vc_clken=0x00000000,g2d=0x00000020,vc rst=0x00000007,g2d rst=0x00000000
[  127.864827] base_addr:71828000,vc_aclk=0x00000021,vc_clken=0x00000000,g2d=0x00000020,vc rst=0x00000007,g2d rst=0x00000000
[  127.917179] reboot: Power down
[  127.92036

Hey guy,

Based on the troubleshooting log, we've identified the cause: the reason for no video output could be either the monitor or the docking station. However, you previously verified that the monitor is working normally. Therefore, we suspect the docking station might be faulty. You may need to replace it with another docking station to support video output.

Best regards,
DC support team

Additionally, connect the docking station to an Intel NUC device to test and determine whether the docking station is faulty.