emacs/etc/MAILINGLISTS

      GNU Project Electronic Mailing Lists and gnUSENET Newsgroups
			 Last Updated 1999-05-06

	   Please report improvements to: gnu@gnu.org

* Mailing list archives

The GNU mailing lists are archived at
ftp://ftp-mailing-list-archives.gnu.org/

* GNU mailing lists are also distributed as USENET news groups

The mailing lists are gated both ways with the gnu.all newsgroups at
uunet.  The one-to-one correspondence is indicated below.  If
you don't know if your site is on USENET, ask your system administrator.
If you are a USENET site and don't get the gnu.all newsgroups, please
ask your USENET administrator to get them.  If he has your feeds ask
their feeds, you should win.  And everyone else wins: newsgroups make
better use of the limited bandwidth of the computer networks and your
home machine than mailing list traffic; and staying off the mailing
lists make better use of the people who maintain the lists and the
machines that the GNU people working with rms use (i.e. we have more
time to produce code!!).  Thanx.

* Getting the mailing lists directly

If several users at your site or local network want to read a list and
you aren't a USENET site, Project GNU would prefer that you would set up
one address that redistributes locally.  This reduces overhead on our
people and machines, your gateway machine, and the network(s) used to
transport the mail from us to you.

* How to subscribe to and report bugs in mailing lists

Send requests to be added or removed, to help-gnu-emacs-request (or
info-gnu-request, bug-gdb-request, etc.), NOT to info-gnu-emacs (or
info-gnu, etc.).  Most <LIST_NAME>-request addresses are now handled
automagically by the SmartList program.

If you need to report problems to a human, send mail to gnu@gnu.org
explaining the problem.

Many of the GNU mailing lists are very large and are received by many
people.  Please don't send them anything that is not seriously important
to all their readers.  All GNU mailing lists are unmoderated mail
reflectors, except info-gnu, info-gnu-emacs, info-gcc, info-g++,
info-gnu-fortran.

All addresses below are in internet format.  Consult the mail guru for
your computer to figure out address syntaxes from other networks.  From
UUCP machines:
	..!ucbvax!gnu.org!ADDRESS
	..!uunet!gnu.org!ADDRESS

If a message you mail to a list is returned from a MAILER-DAEMON (often
with the line:
      ----- Transcript of session follows -----
 don't resend the message to the list.  All this return means is that
your original message failed to reach a few addresses on the list.  Such
messages are NEVER a reason to resend a piece of mail a 2nd time.  This
just bothers all (less the few delivery failures (which will probably
just fail again!)) of the readers of the list with a message they have
already seen.  It also wastes computer and network resources.

It is appropriate to send these to the -request address for a list, and
ask them to check the problem out.

* Send Specific Requests for Information to: gnu@gnu.org

Specific requests for information about obtaining GNU software, or GNU
activities in Cambridge and elsewhere can be directed to:
	gnu@gnu.org

* General Information about all lists

Please keep each message under 25,000 characters.  Some mailers bounce
messages that are longer than this.  If your message is long, it is
generally better to send a message offering to make the large file
available to only those people who want it (e.g. mailing it to people
who ask, or putting it up for FTP).  In the case of gnu.emacs.sources,
somewhat larger postings (up to 10 parts of no more than 25,000
characters each) are acceptable (assuming they are likely to be of
interest to a reasonable number of people); if it is larger than that
have it added to archive.cis.ohio-state.edu (the GNU Emacs Lisp ftp and
uucp archive) and announce its location there.  Good bug reports are
short.  See section '* General Information about bug-* lists and ...'
for further details.

Most of the time, when you reply to a message sent to a list, the reply
should not go to the list.  But most mail reading programs supply, by
default, all the recipients of the original as recipients of the reply.
Make a point of deleting the list address from the header when it does
not belong.  This prevents bothering all readers of a list, and reduces
network congestion.

The GNU mailing lists and newsgroups, like the GNU project itself, exist
to promote the freedom to share software.  So don't use these lists to
promote or recommend non-free software or documentation, like
proprietary books on GNU software.  (Using them to post ordering
information is the ultimate faux pas.)  If there is no free program to
do a certain task, then somebody should write one!  Similarly, free
documentation that is inadequate should be improved--a way in which
non-programmers can make a valuable contribution.  See also the article
at <URL:http://www.gnu.org/philosophy/free-doc.html>.

* General Information about info-* lists

These lists and their newsgroups are meant for important announcements.
Since the GNU project uses software development as a means for social
change, the announcements may be technical or political.

Most GNU projects info-* lists (and their corresponding gnu.*.announce
newsgroups) are moderated to keep their content significant and
relevant.  If you have a bug to report, send it to the bug-* list.  If
you need help on something else and the help-* list exists, ask it.

See section '* General Information about all lists'.

* General Information about help-* lists

These lists (and their newsgroups) exist for anyone to ask questions
about the GNU software that the list deals with.  The lists are read by
people who are willing to take the time to help other users.

When you answer the questions that people ask on the help-* lists, keep
in mind that you shouldn't answer by promoting a proprietary program as
a solution.  The only real solutions are the ones all the readers can
share.

If a program crashes, or if you build it following the standard
procedure on a system on which it is supposed to work and it does not
work at all, or if an command does not behave as it is documented to
behave, this is a bug.  Don't send bug reports to a help-* list; mail
them to the bug-* list instead.

See section '* General Information about all lists'.

* General Information about bug-* lists and reporting program bugs

If you think something is a bug in a program, it might be one; or, it
might be a misunderstanding or even a feature.  Before beginning to
report bugs, please read the section ``Reporting Emacs Bugs'' toward the
end of the GNU Emacs reference manual (or node Emacs/Bugs in Emacs's
built-in Info system) for a discussion of how and when to send in bug
reports.  For GNU programs other than GNU Emacs, also consult their
documentation for their bug reporting procedures.  Always include the
version number of the GNU program, as well as the operating system and
machine the program was ran on (if the program doesn't have a version
number, send the date of the latest entry in the file ChangeLog).  For
GNU Emacs bugs, type "M-x emacs-version".  A debugger backtrace of any
core dump can also be useful.  Be careful to separate out hypothesis
from fact!  For bugs in GNU Emacs lisp, set variable debug-on-error to
t, and re-enter the command(s) that cause the error message; Emacs will
pop up a debug buffer if something is wrong; please include a copy of
the buffer in your bug report.  Please also try to make your bug report
as short as possible; distill the problem to as few lines of code and/or
input as possible.  GNU maintainers give priority to the shortest, high
quality bug reports.

Please don't send in a patch without a test case to illustrate the
problem the patch is supposed to fix.  Sometimes the patches aren't
correct or aren't the best way to do the job, and without a test case
there is no way to debug an alternate fix.

The purpose of reporting a bug is to enable the bug to be fixed for the
sake of the whole community of users.  You may or may not receive a
response; the maintainers will send one if that helps them find or
verify a fix.  Most GNU maintainers are volunteers and all are
overworked; they don't have time to help individuals and still fix the
bugs and make the improvements that everyone wants.  If you want help
for yourself in particular, you may have to hire someone.  The GNU
project maintains a list of people providing such services.  It is
distributed with GNU Emacs in file etc/SERVICE, and can be requested
from gnu@gnu.org.

Anything addressed to the implementors and maintainers of a GNU program
via a bug-* list, should NOT be sent to the corresponding info-* or
help-* list.

Please DON'T post your bug reports on the gnu.*.bug newsgroups!  Mail
them to bug-*@gnu.org instead!  At first sight, it seems to make no
difference: anything sent to one will be propagated to the other; but:
	- if you post on the newsgroup, the information about how to
reach you is lost in the message that goes on the mailing list.  It
can be very important to know how to reach you, if there is anything
in the bug report that we don't understand;
	- bug reports reach the GNU maintainers quickest when they are
sent to the bug-* mailing list submittal address;
	- mail is much more reliable then netnews; and
	- if the internet mailers can't get your bug report delivered,
they almost always send you an error message, so you can find another
way to get the bug report in.  When netnews fails to get your message
delivered to the maintainers, you'll never know about it and the
maintainers will never see the bug report.

And please DON'T post your GNU bug reports to comp.* or other gnu.*
newsgroups, they never make it to the GNU maintainers at all.  Please
mail them to bug-*@gnu.org instead!

See section '* General Information about all lists'.

* info-gnu-request@gnu.org to subscribe to info-gnu
** gnUSENET newsgroup: gnu.announce
** Send announcements to: info-gnu@gnu.org

This list distributes progress reports on the GNU Project.  It is also
used by the GNU Project to ask people for various kinds of help.  It is
NOT for general discussion.

The list is filtered to remove items meant for info-gnu-request, that
can be answered by the moderator without bothering the list, or should
have been sent to another list.

See section '* General Information about info-* lists'.

* gnu-misc-discuss-request@gnu.org to subscribe to gnu-misc-discuss
** gnUSENET newsgroup: gnu.misc.discuss
** Send contributions to: gnu-misc-discuss@gnu.org

This list is for serious discussion of freed software, the GNU Project,
the GNU Manifesto, and their implications.  It's THE place for
discussion that is not appropriate in the other GNU mailing lists and
gnUSENET newsgroups.

Flaming is out of place.  Tit-for-tat is not welcome.  Repetition
should not occur.

Good READING and writing are expected.  Before posting, wait a while,
cool off, and think.

Don't use this group for complaints and bug reports about GNU software!
The maintainers don't read this group; they won't see your complaint.
Use the appropriate bug-reporting mailing list instead, so that people
who can do something about the problem will see it.

Don't trust pronouncements made on gnu-misc-discuss about what GNU is,
what FSF position is, what the GNU General Public License is, etc.,
unless they are made by someone you know is well connected with GNU and
are sure the message is not forged.

USENET and gnUSENET readers are expected to have read ALL the articles
in news.announce.newusers before posting.  If news.announce.newusers is
empty at your site, wait (the articles are posted monthly), your posting
isn't that urgent!  Readers on the Internet can anonymous FTP these
articles from host ftp.uu.net under directory ??

Someone from the Free Software Foundation will attempt to follow this
group as time and volume permits.

Remember, "GNUs Not Unix" and "gnUSENET is Not USENET".  We have
higher standards!

Note that sending technical questions about specific GNU software to
gnu-misc-discuss is likely to be less useful than sending them to the
appropriate mailing list or gnUSENET newsgroup, since more technical
people read those.

* bug-gnu-sql-request@gnu.org to subscribe to bug-gnu-sql
** gnUSENET newsgroup: NONE PLANNED
** GNU-SQL BUG reports to: bug-gnu-sql@gnu.org

This list distributes, to the active maintainers of GNU's SQL (GNU's SQL
full scale database server), bug reports and fixes for, and suggestions
for improvements to GNU's SQL.  User discussion of GNU's SQL also occurs
here.

There are no other GNU mailing lists or gnUSENET newsgroups for GNU's SQL.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-guile-request@gnu.org to subscribe to bug-guile
** gnUSENET newsgroup: NONE PLANNED
** GUILE BUG reports to: bug-guile@gnu.org

This list distributes, to the active maintainers of GUILE (GNU's
Ubiquitous Extension Language), bug reports and fixes for, and suggestions for
improvements to GUILE.  User discussion of GUILE also occurs here.

There are no other GNU mailing lists or gnUSENET newsgroups for GUILE .

See section '* General Information about bug-* lists and reporting
program bugs'.

* guile-sources-request@gnu.org to subscribe to guile-sources
** gnUSENET newsgroup: NONE PLANNED
** Guile source code to: guile-sources@gnu.org

This list will be for the posting, by their authors, of GUILE, Scheme,
and C sources and patches that improve Guile.  Its contents will be
reviewed by the FSF for inclusion in future releases of GUILE.

Please do NOT discuss or request source code here.  Use bug-guile for
those purposes.  This allows the automatic archiving of sources posted
to this list.

Please do NOT post such sources to any other GNU mailing list (e.g
bug-guile) or gnUSENET newsgroups.  It's up to each poster to decide
whether to cross-post to any non-gnUSENET newsgroup.

Please do NOT announce that you have posted source code to guile.sources
to any other GNU mailing list (e.g. bug-guile) or gnUSENET newsgroups.
People who want to keep up with sources will read this list.  It's up to
each poster to decide whether to announce a guile.sources article in any
non-gnUSENET newsgroup (e.g. comp.emacs or comp.sources.d).

If source or patches that were previously posted or a simple fix is
requested in bug-guile, please mail it to the requester.  Do NOT
repost it.  If you also want something that is requested, send mail to
the requester asking him to forward it to you.  This kind of traffic is
best handled by e-mail, not by a broadcast medium that reaches millions
of sites.

If the requested source is very long (>10k bytes) send mail offering to
send it.  This prevents the requester from getting many redundant copies
and saves network bandwidth.

* bug-gnustep-request@gnu.org to subscribe to bug-gnustep
** gnUSENET newsgroup: gnu.gnustep.bug
** Gnustep bug reports to: bug-gnustep@gnu.org
** FAQ-URL: none known
** FAQ-Archive-name: none known
** FAQ-Posting-frequency: none known

This list distributes bug reports for, fixes for bugs in, and
suggestions for improvements in GNUstep to its active developers.

Subscribers to bug-gnustep get all info-gnustep messages.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-gnustep-request@gnu.org to subscribe to help-gnustep
** gnUSENET newsgroup: gnu.gnustep.help
** Send contributions to: help-gnustep@gnu.org
** FAQ-URL: none known
** FAQ-Archive-name: none known
** FAQ-Posting-frequency: none known

This list is the place for users and installers of the GNUstep to ask
for help.  Please send bug reports to bug-gnustep@gnu.org
instead of posting them here.

See section '* General Information about help-* lists'.

* discuss-gnustep-request@gnu.org to subscribe to discuss-gnustep
** gnUSENET newsgroup: gnu.gnustep.discuss
** Send contributions to: discuss-gnustep@gnu.org
** FAQ-URL: none known
** FAQ-Archive-name: none known
** FAQ-Posting-frequency: none known

This list is the place for GNUstep users and developers to discuss
GNUstep.  Please send bug reports to bug-gnustep@gnu.org
instead of posting them here.

See section '* General Information about discuss-* lists'.

* info-gnustep-request@gnu.org to subscribe to info-gnustep
** gnUSENET newsgroup: gnu.gnustep.announce
** Send announcements to: info-gnustep@gnu.org
** FAQ-URL: none known
** FAQ-Archive-name: none known
** FAQ-Posting-frequency: none known

This list distributes announcements and progress reports on GNUstep.
It is NOT for general discussion; please use discuss-gnustep for that.

The list is filtered to remove items meant for info-gnustep-request, that
can be answered by the moderator without bothering the list, or should
have been sent to another list.

Do not report GNUstep bugs to info-gnustep, help-gnustep, or
discuss-gnustep, mail them to bug-gnustep@gnu.org instead.

See section '* General Information about info-* lists'.

* bug-hurd-request@gnu.org to subscribe to bug-hurd
** gnUSENET newsgroup: NONE
** Hurd bug reports to: bug-hurd@gnu.org

This list distributes bug reports for, fixes for bugs in, and
suggestions for improvements in the GNU Hurd to its active developers.

No info-gnu-hurd list is planned.  Announcements about the GNU Hurd will
be made to the list info-gnu@gnu.org (see above).

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-hurd-request@gnu.org to subscribe to help-hurd
** gnUSENET newsgroup: NONE
** Send contributions to: help-hurd@gnu.org

This list is the place for users and installers of the GNU Hurd to ask
for help.

No info-gnu-hurd list is planned.  Announcements about the GNU Hurd will
be made to the list info-gnu@gnu.org (see above).

See section '* General Information about help-* lists'.

* hurd-ann-request@gnu.org IS NOW DEFUNCT
** gnUSENET newsgroup: NEVER EXISTED
** DEAD address: hurd-ann@gnu.org

This list is dead.  Announcements about the GNU Hurd will be made to the
list info-gnu@gnu.org (see above).

* discuss-gnu-electric-request@gnu.org to subscribe to discuss-gnu-electric
** gnUSENET newsgroup: NONE
** Send contributions to: discuss-gnu-electric@gnu.org

This list is the place for user discussion of Gnu Electric, a
sophisticated electrical CAD system that can handle many forms of
circuit design.  Please send bug reports to bug-gnu-electric@gnu.org
(see next entry).

* bug-gnu-electric-request@gnu.org to subscribe to bug-gnu-electric
** gnUSENET newsgroup: NONE
** Gnu Electric bug reports to: bug-gnu-electric@gnu.org

This list distributes, to the active maintainers of GNU Electric, bug
reports and fixes for, and suggestions for improvements in GNU Electric,
a sophisticated electrical CAD system that can handle many forms of
circuit design.

No info-gnu-electric list exists; announcements of new releases are
made to info-gnu@gnu.org (see above).

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-gnu-emacs-request@gnu.org to subscribe to bug-gnu-emacs
** gnUSENET newsgroup: gnu.emacs.bug
** Gnu Emacs bug reports to: bug-gnu-emacs@gnu.org

This list distributes, to the active maintainers of GNU Emacs, bug
reports and fixes for, and suggestions for improvements in GNU Emacs.

Send bugs in the GNU Emacs Lisp reference manual to:
	lisp-manual-bugs@gnu.org

lisp-manual-bugs is neither a mailing list nor a gnUSENET newsgroup.
It's just a bug-reporting address.

Subscribers to bug-gnu-emacs get all info-gnu-emacs messages.

See section '* General Information about bug-* lists and reporting
program bugs'.

* gnu-emacs-sources-request@gnu.org to subscribe to gnu-emacs-sources
** gnUSENET newsgroup: gnu.emacs.sources
** Gnu Emacs source code to: gnu-emacs-sources@gnu.org

This list/newsgroup will be for the posting, by their authors, of Emacs
Lisp and C sources and patches that improve GNU Emacs.  Its contents
will be reviewed by the FSF for inclusion in future releases of GNU
Emacs.

Please do NOT discuss or request source code here.  Use
help-gnu-emacs/gnu.emacs.help for those purposes.  This allows the
automatic archiving of sources posted to this list/newsgroup.

Please do NOT post such sources to any other GNU mailing list (e.g
help-gnu-emacs) or gnUSENET newsgroups (e.g. gnu.emacs.help).  It's up
to each poster to decide whether to cross-post to any non-gnUSENET
newsgroup (e.g. comp.emacs or vmsnet.sources).

Please do NOT announce that you have posted source code to
gnu.emacs.sources to any other GNU mailing list (e.g. help-gnu-emacs) or
gnUSENET newsgroups (e.g. gnu.emacs.help).  People who want to keep up
with sources will read this list/newsgroup.  It's up to each poster to
decide whether to announce a gnu.emacs.sources article in any
non-gnUSENET newsgroup (e.g. comp.emacs or comp.sources.d).

If source or patches that were previously posted or a simple fix is
requested in help-gnu-emacs, please mail it to the requester.  Do NOT
repost it.  If you also want something that is requested, send mail to
the requester asking him to forward it to you.  This kind of traffic is
best handled by e-mail, not by a broadcast medium that reaches millions
of sites.

If the requested source is very long (>10k bytes) send mail offering to
send it.  This prevents the requester from getting many redundant copies
and saves network bandwidth.

* help-gnu-emacs-request@gnu.org to subscribe to help-gnu-emacs
** gnUSENET newsgroup: gnu.emacs.help	(and one-way into comp.emacs)
** Send contributions to: help-gnu-emacs@gnu.org

This list is the place for users and installers of GNU Emacs to ask for
help.  Please send bug reports to bug-gnu-emacs instead of posting them
here.

Since help-gnu-emacs is a very large list, send it only those items that
are seriously important to many people.

If source or patches that were previously posted or a simple fix is
requested in help-gnu-emacs, please mail it to the requester.  Do NOT
repost it.  If you also want something that is requested, send mail to
the requester asking him to forward it to you.  This kind of traffic is
best handled by e-mail, not a broadcast medium that reaches millions of
sites.

This list is also gated one way to USENET's newsgroup comp.emacs (once
known as net.emacs).  This one-way gating is done for users whose sites
get comp.emacs, but not gnu.emacs.help.  Users at non-USENET sites may
receive all articles from comp.emacs by making their request to:
unix-emacs-request@bbn.com

If Emacs crashes, or if you build Emacs following the standard procedure
on a system which Emacs is supposed to work on (see etc/MACHINES) and it
does not work at all, or if an editing command does not behave as it is
documented to behave, this is a bug.  Don't send bug reports to
help-gnu-emacs (gnu.emacs.help) or post them to comp.emacs; mail them to
bug-gnu-emacs@gnu.org instead.

See section '* General Information about help-* lists'.

* info-gnu-emacs-request@gnu.org to subscribe to info-gnu-emacs
** gnUSENET newsgroup: gnu.emacs.announce	(and one-way into comp.emacs)
** Send announcements to: info-gnu-emacs@gnu.org

This list distributes announcements and progress reports on GNU Emacs.
It is NOT for general discussion; please use help-gnu-emacs for that.

The list is filtered to remove items meant for info-gnu-emacs-request,
that can be answered by the moderator without bothering the list, or
should have been sent to another list.

info-gnu-emacs is also gated one way to USENET's newsgroup comp.emacs
(once known as net.emacs).  This one-way gating is done for users whose
sites get comp.emacs, but not gnu.emacs.announce.  Users at non-USENET
sites may receive all articles from comp.emacs by making their request
to: unix-emacs-request@bbn.com

Do not report GNU Emacs bugs to info-gnu-emacs or comp.emacs, instead
mail them to bug-gnu-emacs@gnu.org.

See section '* General Information about info-* lists'.

* vms-gnu-emacs-request@gnu.org to subscribe
** gnUSENET newsgroup: gnu.emacs.vms
** Send contributions to: vms-gnu-emacs@gnu.org

This list was a working group who did the initial port of GNU Emacs to
the VMS operating system.  It still discusses problems and solutions to
the VMS port and the distribution of it.

* bug-bash-request@gnu.org to subscribe to bug-bash
** gnUSENET newsgroup: gnu.bash.bug
** BASH bug reports to: bug-bash@gnu.org

This list distributes, to the active maintainers of BASH (the Bourne
Again SHell), bug reports and fixes for, and suggestions for
improvements in BASH.  User discussion of BASH also occurs here.

Always report the version number of the operating system, hardware, and
bash (flag -version on startup or check the variable $BASH_VERSION in a
running bash).

There are no other GNU mailing lists or gnUSENET newsgroups for BASH.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-gdb-request@gnu.org to subscribe to bug-gdb
** gnUSENET newsgroup: gnu.gdb.bug
** GDB bug reports to: bug-gdb@gnu.org

This list distributes, to the active maintainers of GDB (Gnu's
DeBugger), bug reports and fixes for, and suggestions for improvements
in GDB.  This list is also for user discussion.

There are no other GNU mailing lists or gnUSENET newsgroups for GDB.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-ncurses-request@gnu.org to subscribe to bug-ncurses
** gnUSENET newsgroup: none
** NCURSES bug reports to: bug-ncurses@gnu.org

This list distributes, to the active maintainers of ncurses
(a free implementation of the Unix curses API) bug reports and fixes
for, and suggestions for improvements in ncurses.  Users can also
subscribe to this list.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-ncurses-request@gnu.org to subscribe to help-ncurses
** gnUSENET newsgroup: none
** posts go to: help-ncurses@gnu.org

This list is the place for users and installers of ncurses to ask for
help.  Please send bug reports to bug-ncurses instead of posting them
here.

See section '* General Information about help-* lists'

* bug-gnats-request@gnu.org to subscribe to bug-gnats
** gnUSENET newsgroup: None
** GNATS bug reports to: bug-gnats@gnu.org

This list distributes, to the active maintainers of GNATS (GNats: A
Tracking System), bug reports and fixes for, and suggestions for improvements
in GNATS.  This list is also for user discussion.

There are no other GNU mailing lists or gnUSENET newsgroups for GNATS.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-octave-request@bevo.che.utexas.edu to subscribe to bug-octave
** gnUSENET newsgroup: NONE PLANNED
** Octave bug reports to: bug-octave@bevo.che.utexas.edu

This list distributes, to the active maintainers of Octave (a system
for numerical computations), bug reports and fixes for, and
suggestions for improvements to Octave.

The help-octave mailing list is for user discussion of Octave.

See section '* General Information about bug-* lists and reporting
program bugs'.


* help-octave-request@bevo.che.utexas.edu to subscribe to help-octave
** gnUSENET newsgroup: NONE PLANNED
** Send contributions to: help-octave@bevo.che.utexas.edu

This list is the place for users and installers of Octave to ask for
help.  Please send bug reports to bug-octave instead of posting them
here.

If Octave crashes, or if you build Octave following the standard
procedure on a system on which Octave is supposed to work on and it
does not work at all, or if a command does not behave as it is
documented to behave, this is a bug.  Don't send bug reports to
help-octave; mail them to bug-octave@che.utexas.edu instead.

See section '* General Information about help-* lists'.

* bug-bison-request@gnu.org to subscribe to bug-bison
** gnUSENET newsgroup: NONE
** Bison bug reports to: bug-bison@gnu.org

This list distributes, to the active maintainers of Bison
bug reports and fixes for, and suggestions for improvements
in Bison.  User discussion of Bison bugs occurs here.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-bison-request@gnu.org to subscribe to help-bison
** gnUSENET newsgroup: NONE
** Send contributions to: help-bison@gnu.org

This list is the place for users and installers of Bison
to ask for help.  Please send bug reports to bug-bison instead
of posting them here.

See section '* General Information about help-* lists'.

* bug-make-request@gnu.org to subscribe to bug-make
** gnUSENET newsgroup: NONE
** Make bug reports to: bug-make@gnu.org

This list distributes, to the active maintainers of GNU make
bug reports and fixes for, and suggestions for improvements
in GNU make.  User discussion of GNU make bugs occurs here.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-make-request@gnu.org to subscribe to help-make
** gnUSENET newsgroup: NONE
** Send contributions to: help-make@gnu.org

This list is the place for users and installers of GNU make
to ask for help.  Please send bug reports to bug-make instead
of posting them here.

See section '* General Information about help-* lists'.

* help-flex-request@gnu.org to subscribe to help-flex
** gnUSENET newsgroup: NONE
** Send contributions to: help-flex@gnu.org

This list is the place for users and installers of Flex
to ask for help.  Please send bug reports to bug-gnu-utils instead
of posting them here.

See section '* General Information about help-* lists'.

* bug-rcs-request@gnu.org to subscribe to bug-rcs
** gnUSENET newsgroup: NONE
** RCS bug reports to: bug-rcs@gnu.org

This list distributes, to the active maintainers of RCS
bug reports and fixes for, and suggestions for improvements
in RCS.  User discussion of RCS bugs occurs here.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-rcs-request@gnu.org to subscribe to help-rcs
** gnUSENET newsgroup: NONE
** Send contributions to: help-rcs@gnu.org

This list is the place for users and installers of RCS
to ask for help.  Please send bug reports to bug-rcs instead
of posting them here.

See section '* General Information about help-* lists'.

* bug-gcc-request@gnu.org to subscribe to bug-gcc
** gnUSENET newsgroup: gnu.gcc.bug
** GCC bug reports to: bug-gcc@gnu.org

This list distributes bug reports for, fixes for bugs in, and
suggestions for improvements in the GNU C Compiler to its active
developers.

Please don't send in a patch without a test case to illustrate the
problem the patch is supposed to fix.  Sometimes the patches aren't
correct or aren't the best way to do the job, and without a test case
there is no way to debug an alternate fix.

The most convenient form of test case is a piece of cpp output that can
be passed directly to cc1.  Preferably written in C, not C++ or
Objective C.

Subscribers to bug-gcc get all info-gcc messages.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-gcc-request@gnu.org to subscribe to help-gcc
** gnUSENET newsgroup: gnu.gcc.help
** Send contributions to: help-gcc@gnu.org

This list is the place for users and installers of the GNU C Compiler to
ask for help.

If gcc crashes, or if you build gcc following the standard procedure on
a system which gcc is supposed to work on (see config.sub) and it does
not work at all, or if an command line option does not behave as it is
documented to behave, this is a bug.  Don't send bug reports to help-gcc
(gnu.gcc.help); mail them to bug-gcc@gnu.org instead.

See section '* General Information about help-* lists'.

* info-gcc-request@gnu.org to subscribe to info-gcc
** gnUSENET newsgroup: gnu.gcc.announce
** Send announcements to: info-gcc@gnu.org

This list distributes announcements and progress reports on the GNU C
Compiler.  It is NOT for general discussion; please use help-gcc for
that.

The list is filtered to remove items meant for info-gcc-request, that
can be answered by the moderator without bothering the list, or should
have been sent to another list.

See section '* General Information about info-* lists'.

* bug-gnu960-request@ichips.intel.com to subscribe to bug-gnu960
** gnUSENET newsgroup: NONE PLANNED
** Intel 960 Port bug reports to: bug-gnu960@ichips.intel.com

This list distributes bug reports for, fixes for bugs in, and
suggestions for improvements in Intel's port of GNU software to the
Intel 960 microprocessor.

You can also fax to: GNU/960 - 1-503-696-4930.

There are no other GNU mailing lists or gnUSENET newsgroups for Intel's
port of GNU software to the Intel 960 microprocessor.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-glibc-request@gnu.org to subscribe to bug-glibc
** gnUSENET newsgroup: gnu.glibc.bug
** GNU C Library bug reports to: bug-glibc@gnu.org

This list distributes, to the active maintainers of glibc (GNU's C
library), bug reports and fixes for, and suggestions for improvements in
glibc.  User discussion of glibc also occurs here.

Announcements of new releases of glibc are made on both info-gcc and
bug-glibc.

There are no other GNU mailing lists or gnUSENET newsgroups for the GNU
C Library.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-g++-request@gnu.org to subscribe to bug-g++
** gnUSENET newsgroup: gnu.g++.bug
** G++ bug reports to: bug-g++@gnu.org

This list distributes bug reports for, fixes for bugs in, and
suggestions for improvements in the GNU C++ Compiler to its active
developers.

G++ uses the GNU C-Compiler back end.  Active developers may wish to
subscribe to bug-gcc@gnu.org as well.

Subscribers to bug-g++ get all info-g++ messages.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-g++-request@gnu.org to subscribe to help-g++
** gnUSENET newsgroup: gnu.g++.help	(and one-way into comp.lang.c++)
** Send contributions to: help-g++@gnu.org

This list is the place for users and installers of the GNU C++ Compiler
to ask for help.  Please send bug reports to bug-g++@gnu.org
instead of posting them here.

help-g++ is also gated one way to USENET's newsgroup comp.lang.c++.
This one-way gating is done for users whose sites get comp.lang.c++, but
not gnu.g++.help.

See section '* General Information about help-* lists'.

* info-g++-request@gnu.org to subscribe to info-g++
** gnUSENET newsgroup: gnu.g++.announce	(and one-way into comp.lang.c++)
** Send announcements to: info-g++@gnu.org

This list distributes announcements and progress reports on the GNU C++
Compiler.  It is NOT for general discussion; please use help-g++ for
that.

The list is filtered to remove items meant for info-g++-request, that
can be answered by the moderator without bothering the list, or should
have been sent to another list.

It is also gated one way to USENET's newsgroup comp.lang.c++.  This
one-way gating is done for users whose sites get comp.lang.c++, but not
gnu.g++.announce.

Do not report g++ bugs to info-g++ or comp.lang.c++, mail them to
bug-g++@gnu.org instead.

See section '* General Information about info-* lists'.

* bug-lib-g++-request@gnu.org to subscribe to bug-lib-g++
** gnUSENET newsgroup: gnu.g++.lib.bug
** lib-g++ bug reports to: bug-lib-g++@gnu.org

This list distributes, to the active maintainers of libg++ (GNU's
library for C++), bug reports and fixes for, and suggestions for
improvements in lib-g++.  User discussion of libg++ also occurs here.

Announcements of new releases of libg++ are made on both info-g++ and
bug-lib-g++.

There are no other GNU mailing lists or gnUSENET newsgroups for GNU's
G++ Library.

See section '* General Information about bug-* lists and reporting
program bugs'.

* info-gnu-fortran-request@gnu.org to subscribe to info-gnu-fortran
** gnUSENET newsgroup: NONE YET
** Send announcements to: info-gnu-fortran@gnu.org

This list is for progress reports and release notices for G77/GNU
Fortran.

The list is filtered to remove items meant for info-gnu-fortran-request,
that can be answered by the moderator without bothering the list, or that
should have been sent to another list.

People on the Internet can get a current status report by fingering the
address fortran@gnu.org or by looking at the GNU Fortran web pages at
http://www.gnu.org/software/fortran/fortran.html.

Users looking for help should ask the help-gnu-fortran@gnu.org list.
Bug reports should go to bug-gnu-fortran@gnu.org.

See section '* General Information about info-* lists'.

* help-gnu-fortran-request@gnu.org to subscribe to help-gnu-fortran
** gnUSENET newsgroup:  NONE YET
** Send messages to: help-gnu-fortran@gnu.org

This list is for user requests for help and discussion about GNU
Fortran (G77).  Bug reports should go to bug-gnu-fortran@gnu.org.

See section '* General Information about help-* lists'.

* bug-gnu-fortran@@gnu.org to subscribe to bug-gnu-fortran
** gnUSENET newsgroup:  NONE YET
** Send messages to: help-gnu-fortran@gnu.org

This list is for bug-reports and patches for GNU Fortran
(G77).  Requests for help should go to help-gnu-fortran@gnu.org.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-oleo-request@gnu.org to subscribe to bug-oleo
** gnUSENET newsgroup: NONE PLANNED
** Oleo bug reports to: bug-oleo@gnu.org

This list distributes, to the active maintainers of Oleo (the GNU
spreadsheet), bug reports and fixes for, and suggestions for
improvements to Oleo.  User discussion of Oleo also occurs here.

There are no other GNU mailing lists or gnUSENET newsgroups for Oleo.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-gmp-request@gnu.org to subscribe to bug-gmp
** gnUSENET newsgroup: NONE PLANNED
** gmp bug reports to: bug-gmp@gnu.org

This list distributes, to the active maintainers of gmp (the GNU
Multiple Precision Library), bug reports and fixes for, and suggestions
for improvements to gmp.  User discussion of gmp also occurs here.

There are no other GNU mailing lists or gnUSENET newsgroups for gmp .

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-panorama-request@gnu.org to subscribe to bug-panorama
** gnUSENET newsgroup: NONE PLANNED
** panorama bug reports to: bug-panorama@gnu.org

This list is a place for users of Panorama to send bug reports, fixes
for them, and suggestions for improvements.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-panorama-request@gnu.org to subscribe to help-panorama
** gnUSENET newsgroup: NONE PLANNED
** articles to: help-panorama@gnu.org

This list is the place for users and installers of Panorama to ask for
help. Please send bug reports to bug-panorama instead of posting them
here.

* devel-panorama-request@gnu.org to subscribe to devel-panorama
** gnUSENET newsgroup: NONE PLANNED
** articles to: devel-panorama@gnu.org

This list is a place for discussion among active developers of Panorama
API or any of its plugins.

* bug-mana-request@gnu.org to subscribe to bug-mana
** gnUSENET newsgroup: NONE PLANNED
** mana bug reports to: bug-mana@gnu.org

This list distributes, to the active maintainers of mana (the GNU
stand-alone mail reader), bug reports and fixes for, and suggestions
for improvements to mana.  User discussion of mana also occurs here.

There are no other GNU mailing lists or gnUSENET newsgroups for mana.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-zebra-request@gnu.org to subscribe to bug-zebra
** gnUSENET newsgroup: NONE PLANNED
** zebra bug reports to: bug-zebra@gnu.org

This list distributes, to the active maintainers of zebra (a GPLed
program to manage TCP/IP based routing protocols), bug reports, bug fixes,
and suggestions for improvements to zebra.  User discussion of zebra
also occurs here.

There are no other GNU mailing lists or gnUSENET newsgroups for zebra.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-cfengine-request@gnu.org to subscribe to bug-cfengine
** gnUSENET newsgroup: gnu.cfengine.bug
** cfengine bug reports to: bug-cfengine@gnu.org

This list distributes, to the active maintainers of cfengine (configure
BSD and System-5-like operating systems attached to a TCP/IP network),
bug reports and fixes for, and suggestions for improvements to cfengine.
User discussion of cfengine also occurs here.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-cfengine-request@gnu.org to subscribe to help-cfengine
** gnUSENET newsgroup: gnu.cfengine.help
** Send contributions to: help-cfengine@gnu.org

This list is the place for users and installers of cfengine to ask for
help.  Please send bug reports to bug-cfengine instead of posting them
here.

This list is also used for announcements about cfengine and related
programs, and small but important patches.  Announcements of cfengine
releases are also made to info-gnu@gnu.org (see above)

Since help-cfengine is a large list, send it only those items that
are seriously important to many people.

If source or patches that were previously posted or a simple fix is
requested in help-cfengine, please mail it to the requester.  Do NOT
repost it.  If you also want something that is requested, send mail to
the requester asking him to forward it to you.  This kind of traffic is
best handled by e-mail, not a broadcast medium that reaches millions of
sites.

See section '* General Information about help-* lists'.
Also see section '* General Information about info-* lists'.

* bug-gnu-smalltalk-request@gnu.org to subscribe to bug-gnu-smalltalk
** gnUSENET newsgroup: gnu.smalltalk.bug
** GNU Smalltalk bug reports to: bug-gnu-smalltalk@gnu.org

GNU Smalltalk is the GNU project implementation of the Smalltalk language.

This list distributes, to the active maintainers of GNU Smalltalk, bug
reports and fixes for, and suggestions for improvements to GNU
Smalltalk.  User discussion of GNU Smalltalk also occurs here.

For now, new releases of GNU Smalltalk will also be announced on this list.

There are no other GNU mailing lists or gnUSENET newsgroups for GNU
Smalltalk.

See section '* General Information about bug-* lists and reporting
program bugs'.

* st-next-request@laplace.eng.sun.com to subscribe to st-next
** gnUSENET newsgroup: NONE PLANNED
** Send contributions to: st-next@laplace.eng.sun.com

For people interested in working on GNU Smalltalk on the NeXT.

* bug-groff-request@gnu.org to subscribe to bug-groff
** gnUSENET newsgroup: gnu.groff.bug
** GNU groff bug reports to: bug-groff@gnu.org

groff is the GNU project implementation, in C++, of the traditional Unix
document formatting tools.

This list distributes, to the active maintainers of groff, bug reports
and fixes for, and suggestions for improvements to groff (and it
component programs).  User discussion of groff also occurs here.

For now, new releases of groff will also be announced on this list.

There are no other GNU mailing lists or gnUSENET newsgroups for groff.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-ghostscript-request@gnu.org to subscribe to bug-ghostscript
** gnUSENET newsgroup: gnu.ghostscript.bug
** Ghostscript bug reports to: bug-ghostscript@gnu.org

Ghostscript is the GNU project implementation of a language and graphics
library with a remarkable similarity to PostScript.

This list distributes, to the active maintainers of Ghostscript, bug
reports and fixes for, and suggestions for improvements in Ghostscript.

For now, new releases of Ghostscript will also be announced on this list.

There are no other GNU mailing lists or gnUSENET newsgroups for
Ghostscript.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-gnu-utils-request@gnu.org to subscribe to bug-gnu-utils
** gnUSENET newsgroup: gnu.utils.bug
** GNU Utilities bug reports to: bug-gnu-utils@gnu.org

This list distributes, to the active maintainers of these programs, bug
reports and fixes for, and suggestions for improvements in GNU programs
not covered by other bug-* mailing lists/gnu.*.bug newsgroups.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-gnu-utils-request@gnu.org to subscribe to help-gnu-utils
** gnUSENET newsgroup: gnu.utils.help
** Send contributions to: help-gnu-utils@gnu.org

This list is the place for users and installers of GNU programs not
covered by other GNU mailing lists/gnu.* newsgroups to ask for help.

Don't send bug reports to help-gnu-utils (gnu.utils.help); mail them to
bug-gnu-utils@gnu.org instead.

See section '* General Information about help-* lists'.

* info-gnu-utils-request@gnu.org IS NOW DEFUNCT
** a gnUSENET newsgroup bever existed
** DEAD address: info-gnu-utils@gnu.org

This list is dead.  Announcements about GNU Utilities will be made to the
list info-gnu@gnu.org (see above).

* info-cvs-request@gnu.org to subscribe to info-cvs.
** USENET newsgroup: (none)
** CVS discussions/questions to: info-cvs@gnu.org

This list is for discussion and dissemination of information about
CVS.  Please check the FAQ before posting questions, however.

* bug-cvs-request@gnu.org to subscribe to bug-cvs.
** USENET newsgroup: (none)
** CVS bug reports to: bug-cvs@gnu.org

This list distributes bug reports, fixes, and suggestions for
improvements to the maintainers of CVS.

* bug-dr-geo-request@gnu.org to subscribe to bug-dr-geo
** gnUSENET newsgroup: NONE
** Dr. Geo bug reports to: bug-dr-geo@gnu.org

This list distributes bug reports for, fixes for bugs in, and
suggestions for improvements in Dr. Geo to its active developers.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-fortran-mode-request@erl.mit.edu to subscribe to bug-fortran-mode
** USENET newsgroup: (none)
** Fortran mode bug reports to: bug-fortran-mode@erl.mit.edu

This list collects bug reports, fixes for bugs, and suggestions for
improvements in GNU Emacs's Fortran mode (a major mode to support
editing Fortran source code).

It is the place to report Fortran mode bugs by all users of Fortran
mode.

Always report the version number Fortran mode reports on startup as well
as the version of Emacs.

There is no info-fortran-mode list.  There are no USENET gateways to
bug-fortran-mode at this time.

* info-gnus-request@flab.fujitsu.co.jp  to subscribe
** gnUSENET newsgroup: NONE YET
** Send contributions to: info-gnus@flab.fujitsu.co.jp

The list is intended to exchange useful information about GNUS, such as
bug reports, useful hooks, and extensions of GNUS.  GNUS is an NNTP-base
network news reader for GNU Emacs (which also works with a news spool).
English and Japanese are the official languages of the list.  GNUS is
quite different than gnews.

* info-gnus-english-request@gnu.org  to subscribe
** gnUSENET newsgroup: gnu.emacs.gnus
** Send contributions to: info-gnus-english@gnu.org

The list has the same charter as info-gnus.  The difference is that
English is the only official language of the list.

info-gnus-english/gnu.emacs.gnus is forward to info-gnus, but NOT
vice-versa.

* info-gnews-request@ics.uci.edu to subscribe to info-gnews
** gnUSENET newsgroup: gnu.emacs.gnews
** Send contributions to: info-gnews@ics.uci.edu

This newsgroup is intended to exchange useful information about gnews,
such as bug reports, useful hooks, and extensions of gnews.  gnews is an
NNTP-base network news reader for GNU Emacs (which also works a news
spool).  It is quite different than GNUS.

* gnu-emacs-ada-request@grebyn.com to subscribe to gnu-emacs-ada
** gnUSENET newsgroup: NONE PLANNED
** Gnu Emacs Ada support bug reports to: gnu-emacs-ada@grebyn.com

This list distributes bug reports for, fixes for bugs in, and
suggestions for improvements in GNU Emacs' editing support of the Ada
programming language.

There are no other GNU mailing lists or gnUSENET newsgroups for GNU
Emacs' editing support of Ada.

See section '* General Information about bug-* lists and reporting
program bugs'.

* bug-vm-request@uunet.uu.net to subscribe to bug-vm
** gnUSENET newsgroup: gnu.emacs.vm.bug
** VM mail reader bug reports to: bug-vm@uunet.uu.net

This list discusses bugs in View Mail mode for GNU Emacs, with an
emphasis on beta and prerelease versions.

Always report the version number of VM you are using, as well as the
version of Emacs you're running.  If you believe it is significant,
report the operating system used and the hardware.

Subscribers to bug-vm get all info-vm messages.

* info-vm-request@uunet.uu.net to subscribe to info-vm
** gnUSENET newsgroup: gnu.emacs.vm.info
** Send contributions to: info-vm@uunet.uu.net

This list discusses the View Mail mode for GNU Emacs, an alternative to
rmail mode.

* supercite-request@warsaw.nlm.nih.gov to subscribe to supercite
** gnUSENET newsgroup: NONE PLANNED
** Send articles to: supercite@warsaw.nlm.nih.gov
*** UUCP: ..!uunet!warsaw.nlm.nih.gov!supercite-request

The supercite mailing list covers issues related to the advanced
mail/news citation package called Supercite for GNU Emacs.

* auc-tex-request@iesd.auc.dk to subscribe
** USENET newsgroup: NONE YET
** Send contributions to: auc-tex@iesd.auc.dk

The list is intended to exchange information about AUC TeX, such as
bug reports, request for help, and information on current
developments.  AUC TeX is a much enhanced LaTeX mode for GNU Emacs.

The list is unmoderated.

* bug-gnu-chess-request@gnu.org to subscribe to bug-gnu-chess
** gnUSENET newsgroup: gnu.chess.bug
** GNU Chess bug reports to: bug-gnu-chess@gnu.org

This list directly accesses the GNU Chess developer's group.  If you
have a *BUG* to report about the program, which can also include a
feature enhancement request, please send it to this list.

Subscribers to bug-gnu-chess get all info-gnu-chess messages.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-gnu-chess-request@gnu.org IS NOW DEFUNCT
** gnUSENET newsgroup: NONE PLANNED
** DEAD address: help-gnu-chess@gnu.org

This list is dead.  Use info-gnu-chess@gnu.org/gnu.chess instead.

* info-gnu-chess-request@gnu.org to subscribe to info-gnu-chess
** gnUSENET newsgroup: gnu.chess
** Send contributions to: info-gnu-chess@gnu.org
** FAQ-URL: http://www.tim-mann.org/chess.html
** FAQ-Archive-name: games/chess/gnu-faq
** FAQ-Posting-frequency: monthly

This list is the place for users and installers of GNU Chess to ask for
help.  This list is also used for games played by people or other
entities against the program, and other generalized non-bug,
non-enhancement data.  Please send bug reports to bug-gnu-chess instead
of posting them here.

This list is also used for announcements about GNU Chess and related
programs, and small but important patches.  Announcements of GNU Chess
releases are also made to info-gnu@gnu.org (see above)

Since info-gnu-chess is a large list, send it only those items that
are seriously important to many people.

If source or patches that were previously posted or a simple fix is
requested in info-gnu-chess, please mail it to the requester.  Do NOT
repost it.  If you also want something that is requested, send mail to
the requester asking him to forward it to you.  This kind of traffic is
best handled by e-mail, not a broadcast medium that reaches millions of
sites.

See section '* General Information about help-* lists'.
Also see section '* General Information about info-* lists'.

* bug-gnu-shogi-request@gnu.org to subscribe to bug-gnu-shogi
** gnUSENET newsgroup: NONE PLANNED
** GNU Shogi bug reports to: bug-gnu-shogi@gnu.org

This list directly accesses the GNU Shogi developer's group.  If you
have a *BUG* to report about the program, which can also include a
feature enhancement request, please send it to this list.

Subscribers to bug-gnu-shogi get all info-gnu-shogi messages.

See section '* General Information about bug-* lists and reporting
program bugs'.

Shogi is a game something like chess.  There are several different types
of pieces, a board that is 9 by 9 squares, and the modification that a
captured piece can be reintroduced on the board by the capturing player
(and used).  Due to this last difference from Western chess, a Shogi
game never simplifies.

* bug-mcsim-request@gnu.org to subscribe to bug-mcsim
** gnUSENET newsgroup: None at present.
** MCSim bug reports to: bug-mcsim@gnu.org

This list is used for bug reports concerning MCSim, a general-
purpose modeling and simulation program.  It is also for user
discussion of bug fixes and patches.

This list is unmoderated.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-mcsim-request@gnu.org to subscribe to help-mcsim
** gnUSENET newsgroup: None at present.
** Send contributions to: help-mcsim@gnu.org

This list is the place for users and installers of MCSim to ask for
help.  Please send bug reports to bug-mcsim instead of posting them
here.

This list is also used for announcements about MCSim and related
programs, and small but important patches.  Announcements of MCSim
releases are also made to info-gnu@gnu.org (see above)

* bug-m4-request@gnu.org to subscribe to bug-m4
** gnUSENET newsgroup: None at present.
** Send contributions to: bug-m4@gnu.org

This list is used for bug reports concerning m4, the GNU implementation
of the traditional Unix macro processor.  It is also for user
discussion of bug fixes and patches.

This list is unmoderated.

* gpc-request@gnu.de to subscribe to gpc
** gnUSENET newsgroup: None at present.
** Send contributions to: gpc@gnu.de

This list is the user mailing list for GNU Pascal.
*NOTE* This list was formerly at gpc@hut.fi, and moved as of 1999-05-13.
Announcements will now be sent to an announcements list (see next entry)
as well as to this list and info-gnu@gnu.org.

* gpc-announce-request@gnu.de to subscribe to gpc-announce
** gnUSENET newsgroup: None at present.
** Send contributions to: gpc-announce@gnu.de

This list will have announcements to interest to users of GNU Pascal,
including new releases.

* autoconf-request@gnu.org to subscribe to automake
** gnUSENET newsgroup: NONE PLANNED
** Send contributions to: autoconf@gnu.org

The list can be used to discuss the autoconf build system and related
tools (eg config.guess).  The discussion can range from simple "how-to"
questions up to patches and future directions for this tool.

* automake-request@gnu.org to subscribe to automake
** gnUSENET newsgroup: NONE PLANNED
** Send contributions to: automake@gnu.org

The list can be used to discuss automake and related tools (eg libtool).
The discussion can range from simple "how-to" questions up to patches
and configuration philosophy.

* libtool-request@gnu.org to subscribe to libtool
** gnUSENET newsgroup: NONE PLANNED
** Send contributions to: libtool@gnu.org

The list can be used to discuss development and porting of libtool, and
anything else that the libtool developers might find interesting (excepting
bug-reports which have a list of their own).

This list is unmoderated.

* bug-libtool-request@gnu.org to subscribe to bug-libtool
** gnUSENET newsgroup: NONE PLANNED
** Send contributions to: bug-libtool@gnu.org

The list can be used to submit and to discuss bugs in libtool.  The
discussion can range from bug reports and patches themselves to discourse
related to specific bugs and patches.

This list is unmoderated.

* libtool-commit-request@gnu.org to subscribe to libtool
** gnUSENET newsgroup: NONE PLANNED
** Send contributions to: libtool-commit@gnu.org

The list distributes automatic reports of cvs commits to the libtool
development sources to the  list subscribers.  Probably, any discussion
related to these automatic submissions should go to the libtool list which
has more subscribers who will see the submission.

This list is unmoderated.

* bug-a2ps-request@gnu.org to subscribe to bug-a2ps
** gnUSENET newsgroup: NONE PLANNED
** Send contributions to: bug-a2ps@gnu.org

This list is used for bug reports concerning GNU a2ps, an Any to
PostScript filter.  People willing to help (debugging, or helping users)
may subscribe to this list.

This list is unmoderated.

* a2ps-request@gnu.org to subscribe to a2ps
** gnUSENET newsgroup: NONE PLANNED
** Send contributions to: a2ps@gnu.org

On this list are sent announcements about GNU a2ps --included betas--,
discussions on the interface, implementations etc.  It is by no means a
bug reporting address, and its volume should be kept moderate.  To this
end, and to avoid `accidents' (bug reports and spam), this list is not
moderated but members only can post.

* wget-subscribe@sunsite.auc.dk to subscribe to wget@sunsite.auc.dk
** gnUSENET newsgroup: NONE PLANNED
** Send contributions to: wget@sunsite.auc.dk

This list is for user discussion of wget.  This list is not moderated.

* help-gnu-shogi-request@gnu.org IS NOW DEFUNCT
** gnUSENET newsgroup: NONE PLANNED
** DEAD address: help-gnu-shogi@gnu.org

This list is dead.

* info-gnu-shogi-request@gnu.org to subscribe to info-gnu-shogi
** gnUSENET newsgroup: NONE PLANNED
** Send contributions to: info-gnu-shogi@gnu.org

This list is the place for users and installers of GNU Shogi to ask for
help.  This list is also used for games played by people or other
entities against the program, and other generalized non-bug,
non-enhancement data.  Please send bug reports to bug-gnu-shogi instead
of posting them here.

This list is also used for announcements about GNU Shogi and related
programs, and small but important patches.  Announcements of GNU Shogi
releases are also made to info-gnu@gnu.org (see above)

Since info-gnu-shogi is a large list, send it only those items that
are seriously important to many people.

If source or patches that were previously posted or a simple fix is
requested in info-gnu-shogi, please mail it to the requester.  Do NOT
repost it.  If you also want something that is requested, send mail to
the requester asking him to forward it to you.  This kind of traffic is
best handled by e-mail, not a broadcast medium that reaches millions of
sites.

See section '* General Information about help-* lists'.
Also see section '* General Information about info-* lists'.

* bug-texinfo-request@gnu.org to subscribe to bug-texinfo
** gnUSENET newsgroup: NONE
** GNU Texinfo bug reports to: bug-texinfo@gnu.org

This list distributes, to the active maintainers of these programs, bug
reports and fixes for, and suggestions for improvements in GNU Texinfo,
both the programs and the language.

See section '* General Information about bug-* lists and reporting
program bugs'.

* help-texinfo-request@gnu.org to subscribe to help-texinfo
** gnUSENET newsgroup: NONE
** Send contributions to: help-texinfo@gnu.org

This list is the place for authors, users and installers of GNU Texinfo
to ask for help.

Don't send bug reports to help-texinfo; mail them to
bug-texinfo@gnu.org instead.

See section '* General Information about help-* lists'.

* gnu-manual-request@a.cs.uiuc.edu IS NOW DEFUNCT
** DEAD: Gnusenet newsgroup: gnu.emacs.lisp.manual
** DEAD address: gnu-manual@a.cs.uiuc.edu
*** DEAD UUCP address: ..!uunet!uiucdcs!gnu-manual-request

This list and newsgroup is dead.  It was a working group whose
volunteers wrote, proofread and commented on the developing GNU Emacs
Lisp programmers manual.

Send bugs in the GNU Emacs Lisp reference manual to:
	lisp-manual-bugs@gnu.org

lisp-manual-bugs is neither a mailing list nor a gnUSENET newsgroup.
It's just a bug-reporting address.

* no mailing list request
** gnUSENET newsgroup: gnu.gnusenet.config
** no mailing list

This newsgroup has nothing to do with GNU software, especially its
configuration.  It exists to distribute information about the
administration and configuration of gnUSENET: the gnu.all alternative
USENET hierarchy that carry the GNU mailing lists.

Administrators of gnUSENET hosts receiving the gnu.all newsgroups are
welcome to ask questions here or via e-mail of gnu@gnu.org.

* no mailing list request
** gnUSENET newsgroup: gnu.gnusenet.test
** no mailing list

This newsgroup has nothing to do with GNU software, especially its
testing.  It exists to allow test messages to be made in gnUSENET: the
gnu.all alternative USENET hierarchy that carry the GNU mailing lists.

Local variables:
mode: outline
fill-column: 72
End: