1992-04-19 08:53:55 +00:00
|
|
|
# DIST: This is the distribution Makefile for Emacs. configure can
|
|
|
|
# DIST: make most of the changes to this file you might want, so try
|
|
|
|
# DIST: that first.
|
1992-01-14 07:27:56 +00:00
|
|
|
|
Merge gnulib getopt implementation into Emacs.
* Makefile.in (AUTOCONF_INPUTS): New macro.
($(srcdir)/configure, $(srcdir)/src/stamp-h.in): Depend on it,
so that these files also depend on m4/getopt.m4.
* configure.in: Configure getopt by including m4/getopt.m4,
and configuring a getopt replacement if necessary.
* make-dist: Add m4 subdirectory. Unlink lib-src/getopt.h.
* m4/getopt.m4: New file.
* lib-src/Makefile.in (mostlyclean): Remove getopt.h, getopt.h-t.
(GETOPT_H): New macro, from gnulib.
(getopt.h): New rule, from gnulib.
(GETOPTOBJS): Now autoconfigured.
(GETOPTDEPS): getopt.h is now autoconfigured.
(getopt.o, getopt1.o): Depend on $(GETOPT_H), not ${srcdir}/getopt.h.
(getopt.o): Depend on ${srcdir}/gettext.h.
(movemail.o): Depend on $(GETOPT_H).
* lib-src/getopt.c, lib-src/getopt1.c: Sync from gnulib.
* lib-src/getopt_.h, lib-src/getopt_int.h, lib-src/gettext.h:
New files, from gnulib.
* lib-src/getopt.h: Removed (now is getopt_.h).
* nt/inc/gettext.h: Remove; no longer needed now that
lib-src/gettext.h exists.
* src/s/cygwin.h (C_SWITCH_SYSTEM): Remove, since gettext.h is
now part of lib-src.
2005-07-26 21:43:13 +00:00
|
|
|
# Copyright (C) 1992,93,94,95,96,97,98,1999,2000,01,02,03,04,2005
|
2004-03-02 22:11:53 +00:00
|
|
|
# Free Software Foundation, Inc.
|
2001-02-20 13:36:21 +00:00
|
|
|
|
|
|
|
# This file is part of GNU Emacs.
|
|
|
|
|
|
|
|
# GNU Emacs is free software; you can redistribute it and/or modify
|
|
|
|
# it under the terms of the GNU General Public License as published by
|
|
|
|
# the Free Software Foundation; either version 2, or (at your option)
|
|
|
|
# any later version.
|
|
|
|
|
|
|
|
# GNU Emacs is distributed in the hope that it will be useful,
|
|
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
# GNU General Public License for more details.
|
|
|
|
|
|
|
|
# You should have received a copy of the GNU General Public License
|
|
|
|
# along with GNU Emacs; see the file COPYING. If not, write to
|
2005-07-04 14:42:45 +00:00
|
|
|
# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
|
|
|
|
# Boston, MA 02110-1301, USA.
|
2001-02-20 13:36:21 +00:00
|
|
|
|
1992-04-19 08:53:55 +00:00
|
|
|
# make all to compile and build Emacs.
|
|
|
|
# make install to install it.
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# make TAGS to update tags tables.
|
1992-01-14 07:27:56 +00:00
|
|
|
#
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# make clean or make mostlyclean
|
|
|
|
# Delete all files from the current directory that are normally
|
1992-12-24 05:56:33 +00:00
|
|
|
# created by building the program. Don't delete the files that
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# record the configuration. Also preserve files that could be made
|
|
|
|
# by building, but normally aren't because the distribution comes
|
|
|
|
# with them.
|
|
|
|
#
|
|
|
|
# Delete `.dvi' files here if they are not part of the distribution.
|
2003-02-04 14:56:31 +00:00
|
|
|
#
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# make distclean
|
|
|
|
# Delete all files from the current directory that are created by
|
|
|
|
# configuring or building the program. If you have unpacked the
|
|
|
|
# source and built the program without creating any other files,
|
|
|
|
# `make distclean' should leave only the files that were in the
|
|
|
|
# distribution.
|
2003-02-04 14:56:31 +00:00
|
|
|
#
|
1995-02-07 23:55:01 +00:00
|
|
|
# make maintainer-clean
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# Delete everything from the current directory that can be
|
|
|
|
# reconstructed with this Makefile. This typically includes
|
2004-04-01 02:12:09 +00:00
|
|
|
# everything deleted by distclean, plus more: .elc files,
|
|
|
|
# C source files produced by Bison, tags tables, info files,
|
|
|
|
# and so on.
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
#
|
|
|
|
# make extraclean
|
|
|
|
# Still more severe - delete backup and autosave files, too.
|
2004-11-08 16:40:33 +00:00
|
|
|
#
|
2004-11-11 14:54:26 +00:00
|
|
|
# make bootstrap
|
|
|
|
# Recompiles all the Emacs Lisp files using the latest source,
|
|
|
|
# then rebuilds Emacs.
|
|
|
|
#
|
|
|
|
# make bootfast
|
2004-11-08 16:40:33 +00:00
|
|
|
# Recompiles changed Emacs Lisp files using the latest C source,
|
|
|
|
# then rebuilds Emacs. This is faster than `make bootstrap'
|
|
|
|
# but once in a while an old .elc file can cause trouble.
|
1992-01-14 07:27:56 +00:00
|
|
|
|
|
|
|
SHELL = /bin/sh
|
1994-04-14 03:42:48 +00:00
|
|
|
|
2004-02-09 23:22:28 +00:00
|
|
|
# This may not work with certain non-GNU make's. It only matters when
|
|
|
|
# inheriting a CDPATH not starting with the current directory.
|
|
|
|
CDPATH=
|
|
|
|
|
1994-04-14 03:42:48 +00:00
|
|
|
# If Make doesn't predefine MAKE, set it here.
|
|
|
|
@SET_MAKE@
|
1992-01-14 07:27:56 +00:00
|
|
|
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# ==================== Things `configure' Might Edit ====================
|
1992-01-14 07:27:56 +00:00
|
|
|
|
* Makefile.in (clean mostlyclean): Missing right paren.
Change `configure' to a mixture of custom code and autoconf stuff.
autoconf can't derive all the information we need, but we'd really
like to be able to take advantage of some of its tests, and its
file-editing facilities.
* configure.in: Renamed from configure.
Quote the sections of shell script we want copied literally to
the configure script.
(compile): Initialize this to make the autoconf macros' code happy.
Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
code to do their jobs.
Use autoconf to produce Makefile and src/config.h.
Remove the Makefile-style comment that autoconf places at the top
of src/config.h.
(config_h_opts): Removed - no longer necessary.
* Makefile.in (configname): Renamed to configuration.
(CONFIG_CFLAGS): Renamed to DEFS.
(CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
get values via autoload @cookies@.
(libsrc_libs): Get this from autoconf. We used to do nothing
about this.
(${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
* Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
echo the move-if-change command.
1993-04-10 06:01:49 +00:00
|
|
|
CC=@CC@
|
1993-06-16 23:46:17 +00:00
|
|
|
CPP=@CPP@
|
* Makefile.in (clean mostlyclean): Missing right paren.
Change `configure' to a mixture of custom code and autoconf stuff.
autoconf can't derive all the information we need, but we'd really
like to be able to take advantage of some of its tests, and its
file-editing facilities.
* configure.in: Renamed from configure.
Quote the sections of shell script we want copied literally to
the configure script.
(compile): Initialize this to make the autoconf macros' code happy.
Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
code to do their jobs.
Use autoconf to produce Makefile and src/config.h.
Remove the Makefile-style comment that autoconf places at the top
of src/config.h.
(config_h_opts): Removed - no longer necessary.
* Makefile.in (configname): Renamed to configuration.
(CONFIG_CFLAGS): Renamed to DEFS.
(CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
get values via autoload @cookies@.
(libsrc_libs): Get this from autoconf. We used to do nothing
about this.
(${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
* Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
echo the move-if-change command.
1993-04-10 06:01:49 +00:00
|
|
|
C_SWITCH_SYSTEM=@c_switch_system@
|
* configure.in: Use the AC_ALLOCA test.
* Makefile.in (ALLOCA): New variable, to be set by ./configure.
(lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
* Makefile.in (install): Print out the name of the directory we're
copying, so people can have some idea of whether we're making
progress.
* Makefile.in (install.aix, install.xenix, install.sysv, install):
Don't forget to re-create the COPYDESTS directories after we clear
them out.
* Makefile.in: Add autoconf cookies so that the configure
script can comment out sections of path variable definitions to
choose between the installable configuration and the run-in-place
configuration.
* configure.in: Add new option `--run-in-place', to select the
run-in-place path definitions.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Make sure that each source directory exists, and is different from
the destination directory; then, delete the destination before
copying over the source.
1993-05-03 02:06:16 +00:00
|
|
|
ALLOCA=@ALLOCA@
|
1993-05-09 22:51:16 +00:00
|
|
|
LN_S=@LN_S@
|
|
|
|
CFLAGS=@CFLAGS@
|
1997-07-27 21:40:24 +00:00
|
|
|
LDFLAGS=@LDFLAGS@
|
1997-07-30 04:22:56 +00:00
|
|
|
CPPFLAGS=@CPPFLAGS@
|
1993-05-23 21:49:20 +00:00
|
|
|
C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
|
1993-05-31 06:03:21 +00:00
|
|
|
LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
|
2003-02-08 17:27:58 +00:00
|
|
|
EXEEXT=@EXEEXT@
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
|
|
|
|
### These help us choose version- and architecture-specific directories
|
|
|
|
### to install files in.
|
|
|
|
|
|
|
|
### This should be the number of the Emacs version we're building,
|
|
|
|
### like `18.59' or `19.0'.
|
* Makefile.in (clean mostlyclean): Missing right paren.
Change `configure' to a mixture of custom code and autoconf stuff.
autoconf can't derive all the information we need, but we'd really
like to be able to take advantage of some of its tests, and its
file-editing facilities.
* configure.in: Renamed from configure.
Quote the sections of shell script we want copied literally to
the configure script.
(compile): Initialize this to make the autoconf macros' code happy.
Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
code to do their jobs.
Use autoconf to produce Makefile and src/config.h.
Remove the Makefile-style comment that autoconf places at the top
of src/config.h.
(config_h_opts): Removed - no longer necessary.
* Makefile.in (configname): Renamed to configuration.
(CONFIG_CFLAGS): Renamed to DEFS.
(CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
get values via autoload @cookies@.
(libsrc_libs): Get this from autoconf. We used to do nothing
about this.
(${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
* Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
echo the move-if-change command.
1993-04-10 06:01:49 +00:00
|
|
|
version=@version@
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
|
|
|
|
### This should be the name of the configuration we're building Emacs
|
|
|
|
### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
|
* Makefile.in (clean mostlyclean): Missing right paren.
Change `configure' to a mixture of custom code and autoconf stuff.
autoconf can't derive all the information we need, but we'd really
like to be able to take advantage of some of its tests, and its
file-editing facilities.
* configure.in: Renamed from configure.
Quote the sections of shell script we want copied literally to
the configure script.
(compile): Initialize this to make the autoconf macros' code happy.
Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
code to do their jobs.
Use autoconf to produce Makefile and src/config.h.
Remove the Makefile-style comment that autoconf places at the top
of src/config.h.
(config_h_opts): Removed - no longer necessary.
* Makefile.in (configname): Renamed to configuration.
(CONFIG_CFLAGS): Renamed to DEFS.
(CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
get values via autoload @cookies@.
(libsrc_libs): Get this from autoconf. We used to do nothing
about this.
(${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
* Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
echo the move-if-change command.
1993-04-10 06:01:49 +00:00
|
|
|
configuration=@configuration@
|
|
|
|
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# ==================== Where To Install Things ====================
|
|
|
|
|
1992-04-19 08:53:55 +00:00
|
|
|
# The default location for installation. Everything is placed in
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# subdirectories of this directory. The default values for many of
|
|
|
|
# the variables below are expressed in terms of this one, so you may
|
1993-05-23 04:42:11 +00:00
|
|
|
# not need to change them. This defaults to /usr/local.
|
|
|
|
prefix=@prefix@
|
1992-01-14 07:27:56 +00:00
|
|
|
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# Like `prefix', but used for architecture-specific files.
|
1993-05-24 06:08:13 +00:00
|
|
|
exec_prefix=@exec_prefix@
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
|
1992-04-19 08:53:55 +00:00
|
|
|
# Where to install Emacs and other binaries that people will want to
|
|
|
|
# run directly (like etags).
|
1993-09-28 09:41:00 +00:00
|
|
|
bindir=@bindir@
|
1992-01-14 07:27:56 +00:00
|
|
|
|
1992-12-24 05:56:33 +00:00
|
|
|
# Where to install architecture-independent data files. ${lispdir}
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# and ${etcdir} are subdirectories of this.
|
1993-09-28 09:41:00 +00:00
|
|
|
datadir=@datadir@
|
1992-12-06 22:12:37 +00:00
|
|
|
|
|
|
|
# Where to install and expect the files that Emacs modifies as it
|
1997-08-07 18:37:17 +00:00
|
|
|
# runs. These files are all architecture-independent.
|
|
|
|
# Right now, this is not used.
|
1994-10-17 04:28:54 +00:00
|
|
|
sharedstatedir=@sharedstatedir@
|
1992-12-06 22:12:37 +00:00
|
|
|
|
|
|
|
# Where to install and expect executable files to be run by Emacs
|
|
|
|
# rather than directly by users, and other architecture-dependent
|
1992-12-24 05:56:33 +00:00
|
|
|
# data. ${archlibdir} is a subdirectory of this.
|
1994-10-11 21:36:30 +00:00
|
|
|
libexecdir=@libexecdir@
|
1992-12-06 22:12:37 +00:00
|
|
|
|
|
|
|
# Where to install Emacs's man pages, and what extension they should have.
|
1993-09-28 09:41:00 +00:00
|
|
|
mandir=@mandir@
|
1992-12-06 22:12:37 +00:00
|
|
|
manext=.1
|
1995-11-11 20:52:52 +00:00
|
|
|
man1dir=$(mandir)/man1
|
1992-12-06 22:12:37 +00:00
|
|
|
|
|
|
|
# Where to install and expect the info files describing Emacs. In the
|
|
|
|
# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
|
|
|
|
# since there are now many packages documented with the texinfo
|
|
|
|
# system, it is inappropriate to imply that it is part of Emacs.
|
1993-09-28 09:41:00 +00:00
|
|
|
infodir=@infodir@
|
1992-01-14 07:27:56 +00:00
|
|
|
|
2002-07-21 20:20:59 +00:00
|
|
|
# Directory for local state files for all programs.
|
|
|
|
localstatedir=@localstatedir@
|
|
|
|
|
1994-10-16 10:00:36 +00:00
|
|
|
# Where to look for bitmap files.
|
|
|
|
bitmapdir=@bitmapdir@
|
|
|
|
|
1993-05-25 14:15:52 +00:00
|
|
|
# Where to find the source code. The source code for Emacs's C kernel is
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# expected to be in ${srcdir}/src, and the source code for Emacs's
|
|
|
|
# utility programs is expected to be in ${srcdir}/lib-src. This is
|
|
|
|
# set by the configure script's `--srcdir' option.
|
1998-08-02 00:22:31 +00:00
|
|
|
|
|
|
|
# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
|
* configure.in: Use the AC_ALLOCA test.
* Makefile.in (ALLOCA): New variable, to be set by ./configure.
(lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
* Makefile.in (install): Print out the name of the directory we're
copying, so people can have some idea of whether we're making
progress.
* Makefile.in (install.aix, install.xenix, install.sysv, install):
Don't forget to re-create the COPYDESTS directories after we clear
them out.
* Makefile.in: Add autoconf cookies so that the configure
script can comment out sections of path variable definitions to
choose between the installable configuration and the run-in-place
configuration.
* configure.in: Add new option `--run-in-place', to select the
run-in-place path definitions.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Make sure that each source directory exists, and is different from
the destination directory; then, delete the destination before
copying over the source.
1993-05-03 02:06:16 +00:00
|
|
|
srcdir=@srcdir@
|
1992-01-14 07:27:56 +00:00
|
|
|
|
1993-10-03 19:55:09 +00:00
|
|
|
# Tell make where to find source files; this is needed for the makefiles.
|
|
|
|
VPATH=@srcdir@
|
|
|
|
|
1997-08-16 18:29:29 +00:00
|
|
|
# Where to find the application default.
|
|
|
|
x_default_search_path=@x_default_search_path@
|
|
|
|
|
2003-01-07 05:46:31 +00:00
|
|
|
# Location to install Emacs.app on Mac OS X
|
|
|
|
carbon_appdir=@carbon_appdir@
|
|
|
|
|
1992-12-06 22:12:37 +00:00
|
|
|
# ==================== Emacs-specific directories ====================
|
|
|
|
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# These variables hold the values Emacs will actually use. They are
|
|
|
|
# based on the values of the standard Make variables above.
|
|
|
|
|
1993-09-28 09:41:00 +00:00
|
|
|
# Where to install the lisp files distributed with
|
|
|
|
# Emacs. This includes the Emacs version, so that the
|
|
|
|
# lisp files for different versions of Emacs will install
|
|
|
|
# themselves in separate directories.
|
|
|
|
lispdir=@lispdir@
|
* configure.in: Use the AC_ALLOCA test.
* Makefile.in (ALLOCA): New variable, to be set by ./configure.
(lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
* Makefile.in (install): Print out the name of the directory we're
copying, so people can have some idea of whether we're making
progress.
* Makefile.in (install.aix, install.xenix, install.sysv, install):
Don't forget to re-create the COPYDESTS directories after we clear
them out.
* Makefile.in: Add autoconf cookies so that the configure
script can comment out sections of path variable definitions to
choose between the installable configuration and the run-in-place
configuration.
* configure.in: Add new option `--run-in-place', to select the
run-in-place path definitions.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Make sure that each source directory exists, and is different from
the destination directory; then, delete the destination before
copying over the source.
1993-05-03 02:06:16 +00:00
|
|
|
|
1993-09-28 09:41:00 +00:00
|
|
|
# Directories Emacs should search for lisp files specific
|
|
|
|
# to this site (i.e. customizations), before consulting
|
|
|
|
# ${lispdir}. This should be a colon-separated list of
|
|
|
|
# directories.
|
|
|
|
locallisppath=@locallisppath@
|
* configure.in: Use the AC_ALLOCA test.
* Makefile.in (ALLOCA): New variable, to be set by ./configure.
(lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
* Makefile.in (install): Print out the name of the directory we're
copying, so people can have some idea of whether we're making
progress.
* Makefile.in (install.aix, install.xenix, install.sysv, install):
Don't forget to re-create the COPYDESTS directories after we clear
them out.
* Makefile.in: Add autoconf cookies so that the configure
script can comment out sections of path variable definitions to
choose between the installable configuration and the run-in-place
configuration.
* configure.in: Add new option `--run-in-place', to select the
run-in-place path definitions.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Make sure that each source directory exists, and is different from
the destination directory; then, delete the destination before
copying over the source.
1993-05-03 02:06:16 +00:00
|
|
|
|
|
|
|
# Where Emacs will search to find its lisp files. Before
|
|
|
|
# changing this, check to see if your purpose wouldn't
|
|
|
|
# better be served by changing locallisppath. This
|
1992-04-19 08:53:55 +00:00
|
|
|
# should be a colon-separated list of directories.
|
1993-09-28 09:41:00 +00:00
|
|
|
lisppath=@lisppath@
|
1992-01-14 07:27:56 +00:00
|
|
|
|
* configure.in: Use the AC_ALLOCA test.
* Makefile.in (ALLOCA): New variable, to be set by ./configure.
(lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
* Makefile.in (install): Print out the name of the directory we're
copying, so people can have some idea of whether we're making
progress.
* Makefile.in (install.aix, install.xenix, install.sysv, install):
Don't forget to re-create the COPYDESTS directories after we clear
them out.
* Makefile.in: Add autoconf cookies so that the configure
script can comment out sections of path variable definitions to
choose between the installable configuration and the run-in-place
configuration.
* configure.in: Add new option `--run-in-place', to select the
run-in-place path definitions.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Make sure that each source directory exists, and is different from
the destination directory; then, delete the destination before
copying over the source.
1993-05-03 02:06:16 +00:00
|
|
|
# Where Emacs will search for its lisp files while
|
|
|
|
# building. This is only used during the process of
|
|
|
|
# compiling Emacs, to help Emacs find its lisp files
|
|
|
|
# before they've been installed in their final location.
|
2003-02-04 14:56:31 +00:00
|
|
|
# It's usually identical to lisppath, except that
|
1994-08-09 23:26:13 +00:00
|
|
|
# it does not include locallisppath, and the
|
* configure.in: Use the AC_ALLOCA test.
* Makefile.in (ALLOCA): New variable, to be set by ./configure.
(lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
* Makefile.in (install): Print out the name of the directory we're
copying, so people can have some idea of whether we're making
progress.
* Makefile.in (install.aix, install.xenix, install.sysv, install):
Don't forget to re-create the COPYDESTS directories after we clear
them out.
* Makefile.in: Add autoconf cookies so that the configure
script can comment out sections of path variable definitions to
choose between the installable configuration and the run-in-place
configuration.
* configure.in: Add new option `--run-in-place', to select the
run-in-place path definitions.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Make sure that each source directory exists, and is different from
the destination directory; then, delete the destination before
copying over the source.
1993-05-03 02:06:16 +00:00
|
|
|
# entry for the directory containing the installed lisp
|
|
|
|
# files has been replaced with ../lisp. This should be a
|
|
|
|
# colon-separated list of directories.
|
1993-05-15 23:57:11 +00:00
|
|
|
buildlisppath=${srcdir}/lisp
|
1992-01-14 07:27:56 +00:00
|
|
|
|
1993-09-28 09:41:00 +00:00
|
|
|
# Where to install the other architecture-independent
|
|
|
|
# data files distributed with Emacs (like the tutorial,
|
|
|
|
# the cookie recipes and the Zippy database). This path
|
|
|
|
# usually contains the Emacs version number, so the data
|
|
|
|
# files for multiple versions of Emacs may be installed
|
|
|
|
# at once.
|
|
|
|
etcdir=@etcdir@
|
|
|
|
|
|
|
|
# Where to put executables to be run by Emacs rather than
|
|
|
|
# the user. This path usually includes the Emacs version
|
|
|
|
# and configuration name, so that multiple configurations
|
|
|
|
# for multiple versions of Emacs may be installed at
|
|
|
|
# once.
|
|
|
|
archlibdir=@archlibdir@
|
1993-03-17 13:23:14 +00:00
|
|
|
|
1994-02-22 23:56:15 +00:00
|
|
|
# Where to put the docstring file.
|
|
|
|
docdir=@docdir@
|
|
|
|
|
2002-07-21 20:20:59 +00:00
|
|
|
# Where to install Emacs game score files.
|
|
|
|
gamedir=@gamedir@
|
|
|
|
|
1992-04-19 08:53:55 +00:00
|
|
|
# ==================== Utility Programs for the Build ====================
|
|
|
|
|
|
|
|
# Allow the user to specify the install program.
|
1993-05-25 20:00:53 +00:00
|
|
|
INSTALL = @INSTALL@
|
1993-05-24 06:08:13 +00:00
|
|
|
INSTALL_PROGRAM = @INSTALL_PROGRAM@
|
|
|
|
INSTALL_DATA = @INSTALL_DATA@
|
2003-01-06 14:55:12 +00:00
|
|
|
INSTALL_INFO = @INSTALL_INFO@
|
1996-08-29 20:54:02 +00:00
|
|
|
# By default, we uphold the dignity of our programs.
|
|
|
|
INSTALL_STRIP =
|
1992-04-19 08:53:55 +00:00
|
|
|
|
2005-11-01 11:48:27 +00:00
|
|
|
# We use gzip to compress installed .el files.
|
2005-11-03 17:00:25 +00:00
|
|
|
GZIP_PROG = @GZIP_PROG@
|
2005-11-01 11:48:27 +00:00
|
|
|
|
1992-04-19 08:53:55 +00:00
|
|
|
# ============================= Targets ==============================
|
1992-01-14 07:27:56 +00:00
|
|
|
|
2001-11-15 20:37:20 +00:00
|
|
|
# Program name transformation.
|
|
|
|
TRANSFORM = @program_transform_name@
|
|
|
|
|
1994-04-23 01:07:04 +00:00
|
|
|
# What emacs should be called when installed.
|
2003-02-08 17:27:58 +00:00
|
|
|
EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
|
|
|
|
EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
|
1994-04-23 01:07:04 +00:00
|
|
|
|
1992-01-14 07:27:56 +00:00
|
|
|
# Subdirectories to make recursively. `lisp' is not included
|
2002-05-07 06:08:37 +00:00
|
|
|
# because the compiled lisp files are part of the distribution.
|
2001-03-29 14:24:43 +00:00
|
|
|
# leim is not included because it needs special handling.
|
|
|
|
SUBDIR = lib-src src
|
1992-01-14 07:27:56 +00:00
|
|
|
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# The makefiles of the directories in $SUBDIR.
|
2001-11-24 10:47:42 +00:00
|
|
|
SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile lispref/Makefile lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
|
1993-02-14 14:26:06 +00:00
|
|
|
# Subdirectories to install, and where they'll go.
|
|
|
|
# lib-src's makefile knows how to install it, so we don't do that here.
|
1997-07-01 07:05:03 +00:00
|
|
|
# leim's makefile also knows how to install it, so we don't do that here.
|
1993-02-14 14:26:06 +00:00
|
|
|
# When installing the info files, we need to do special things to
|
|
|
|
# avoid nuking an existing dir file, so we don't do that here;
|
|
|
|
# instead, we have written out explicit code in the `install' targets.
|
1993-05-27 22:15:01 +00:00
|
|
|
COPYDIR = ${srcdir}/etc ${srcdir}/lisp
|
|
|
|
COPYDESTS = ${etcdir} ${lispdir}
|
1992-01-14 07:27:56 +00:00
|
|
|
|
2002-02-13 15:47:55 +00:00
|
|
|
all: ${SUBDIR} leim
|
1992-01-14 07:27:56 +00:00
|
|
|
|
1994-07-07 02:44:58 +00:00
|
|
|
removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
|
1992-04-19 08:53:55 +00:00
|
|
|
|
1999-02-26 11:37:55 +00:00
|
|
|
# Generate epaths.h from epaths.in. This target is invoked by `configure'.
|
|
|
|
epaths-force: FRC
|
1994-05-27 08:17:46 +00:00
|
|
|
@(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
|
|
|
|
buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
|
1997-08-16 18:29:29 +00:00
|
|
|
x_default_search_path=`echo ${x_default_search_path}`; \
|
2002-07-21 20:20:59 +00:00
|
|
|
gamedir=`echo ${gamedir}`; \
|
1999-02-26 11:37:55 +00:00
|
|
|
sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
|
2005-06-20 13:54:33 +00:00
|
|
|
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";' \
|
|
|
|
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
|
1994-05-27 08:17:46 +00:00
|
|
|
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
|
|
|
|
-e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
|
|
|
|
-e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
|
1994-10-16 10:00:36 +00:00
|
|
|
-e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
|
1997-08-16 18:29:29 +00:00
|
|
|
-e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
|
2002-07-21 20:20:59 +00:00
|
|
|
-e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
|
2004-06-11 02:39:51 +00:00
|
|
|
-e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
|
|
|
|
-e 's;/[*] *arch-tag:.*;/*;') && \
|
1999-02-26 11:37:55 +00:00
|
|
|
${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
|
1994-05-27 08:17:46 +00:00
|
|
|
|
1997-09-17 00:35:15 +00:00
|
|
|
# For parallel make, src should be build before leim.
|
2001-03-29 14:24:43 +00:00
|
|
|
# "export PARALLEL=0" is for SGI's Make, to prevent it from
|
|
|
|
# running more than 1 process in the leim directory, especially for
|
|
|
|
# the $TIT files there.
|
|
|
|
leim: src ${SUBDIR_MAKEFILES} FRC
|
|
|
|
(export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
|
|
|
|
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
|
|
|
|
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
|
1997-09-17 00:35:15 +00:00
|
|
|
|
1996-08-22 19:28:01 +00:00
|
|
|
src: lib-src FRC
|
1994-05-03 08:18:08 +00:00
|
|
|
|
1997-06-23 02:53:36 +00:00
|
|
|
lib-src: FRC src/config.stamp
|
1992-01-14 07:27:56 +00:00
|
|
|
|
2001-03-29 14:24:43 +00:00
|
|
|
.RECURSIVE: ${SUBDIR} leim
|
1992-01-14 07:27:56 +00:00
|
|
|
|
2002-02-13 15:47:55 +00:00
|
|
|
${SUBDIR}: maybe_bootstrap ${SUBDIR_MAKEFILES} FRC
|
1993-09-28 09:41:00 +00:00
|
|
|
cd $@; $(MAKE) all $(MFLAGS) \
|
1994-01-02 18:54:37 +00:00
|
|
|
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
|
|
|
|
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
|
1993-09-28 09:41:00 +00:00
|
|
|
|
1994-05-27 08:17:46 +00:00
|
|
|
blessmail: ${SUBDIR_MAKEFILES} src FRC
|
1995-03-12 06:11:27 +00:00
|
|
|
cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
|
|
|
|
MAKE='${MAKE}' archlibdir='$(archlibdir)'
|
1994-05-04 05:15:26 +00:00
|
|
|
|
1998-08-02 00:21:33 +00:00
|
|
|
Makefile: $(srcdir)/Makefile.in config.status
|
1993-09-28 09:41:00 +00:00
|
|
|
./config.status
|
|
|
|
|
2000-08-07 13:12:32 +00:00
|
|
|
config.status: ${srcdir}/configure
|
1999-10-06 21:56:30 +00:00
|
|
|
./config.status --recheck
|
|
|
|
|
Merge gnulib getopt implementation into Emacs.
* Makefile.in (AUTOCONF_INPUTS): New macro.
($(srcdir)/configure, $(srcdir)/src/stamp-h.in): Depend on it,
so that these files also depend on m4/getopt.m4.
* configure.in: Configure getopt by including m4/getopt.m4,
and configuring a getopt replacement if necessary.
* make-dist: Add m4 subdirectory. Unlink lib-src/getopt.h.
* m4/getopt.m4: New file.
* lib-src/Makefile.in (mostlyclean): Remove getopt.h, getopt.h-t.
(GETOPT_H): New macro, from gnulib.
(getopt.h): New rule, from gnulib.
(GETOPTOBJS): Now autoconfigured.
(GETOPTDEPS): getopt.h is now autoconfigured.
(getopt.o, getopt1.o): Depend on $(GETOPT_H), not ${srcdir}/getopt.h.
(getopt.o): Depend on ${srcdir}/gettext.h.
(movemail.o): Depend on $(GETOPT_H).
* lib-src/getopt.c, lib-src/getopt1.c: Sync from gnulib.
* lib-src/getopt_.h, lib-src/getopt_int.h, lib-src/gettext.h:
New files, from gnulib.
* lib-src/getopt.h: Removed (now is getopt_.h).
* nt/inc/gettext.h: Remove; no longer needed now that
lib-src/gettext.h exists.
* src/s/cygwin.h (C_SWITCH_SYSTEM): Remove, since gettext.h is
now part of lib-src.
2005-07-26 21:43:13 +00:00
|
|
|
AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4
|
|
|
|
|
|
|
|
$(srcdir)/configure: $(AUTOCONF_INPUTS)
|
1999-10-06 21:56:30 +00:00
|
|
|
cd ${srcdir} && autoconf
|
|
|
|
|
2002-04-15 13:13:02 +00:00
|
|
|
$(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
|
|
|
|
@true
|
Merge gnulib getopt implementation into Emacs.
* Makefile.in (AUTOCONF_INPUTS): New macro.
($(srcdir)/configure, $(srcdir)/src/stamp-h.in): Depend on it,
so that these files also depend on m4/getopt.m4.
* configure.in: Configure getopt by including m4/getopt.m4,
and configuring a getopt replacement if necessary.
* make-dist: Add m4 subdirectory. Unlink lib-src/getopt.h.
* m4/getopt.m4: New file.
* lib-src/Makefile.in (mostlyclean): Remove getopt.h, getopt.h-t.
(GETOPT_H): New macro, from gnulib.
(getopt.h): New rule, from gnulib.
(GETOPTOBJS): Now autoconfigured.
(GETOPTDEPS): getopt.h is now autoconfigured.
(getopt.o, getopt1.o): Depend on $(GETOPT_H), not ${srcdir}/getopt.h.
(getopt.o): Depend on ${srcdir}/gettext.h.
(movemail.o): Depend on $(GETOPT_H).
* lib-src/getopt.c, lib-src/getopt1.c: Sync from gnulib.
* lib-src/getopt_.h, lib-src/getopt_int.h, lib-src/gettext.h:
New files, from gnulib.
* lib-src/getopt.h: Removed (now is getopt_.h).
* nt/inc/gettext.h: Remove; no longer needed now that
lib-src/gettext.h exists.
* src/s/cygwin.h (C_SWITCH_SYSTEM): Remove, since gettext.h is
now part of lib-src.
2005-07-26 21:43:13 +00:00
|
|
|
$(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
|
2002-04-15 13:13:02 +00:00
|
|
|
cd ${srcdir} && autoheader
|
|
|
|
rm -f $(srcdir)/src/stamp-h.in
|
|
|
|
echo timestamp > $(srcdir)/src/stamp-h.in
|
|
|
|
|
1998-08-02 00:21:33 +00:00
|
|
|
src/Makefile: $(srcdir)/src/Makefile.in config.status
|
1993-09-28 09:41:00 +00:00
|
|
|
./config.status
|
|
|
|
|
1998-08-02 00:21:33 +00:00
|
|
|
src/config.stamp: $(srcdir)/src/config.in config.status
|
1997-06-23 02:30:36 +00:00
|
|
|
./config.status
|
1997-06-23 02:53:36 +00:00
|
|
|
touch src/config.stamp
|
1997-06-23 02:30:36 +00:00
|
|
|
|
1998-08-02 00:21:33 +00:00
|
|
|
lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status
|
1993-09-28 09:41:00 +00:00
|
|
|
./config.status
|
|
|
|
|
1998-08-02 00:21:33 +00:00
|
|
|
man/Makefile: $(srcdir)/man/Makefile.in config.status
|
1997-08-30 07:14:23 +00:00
|
|
|
./config.status
|
|
|
|
|
2001-11-10 14:43:58 +00:00
|
|
|
lispref/Makefile: $(srcdir)/lispref/Makefile.in config.status
|
|
|
|
./config.status
|
|
|
|
|
2001-11-24 10:47:42 +00:00
|
|
|
lispintro/Makefile: $(srcdir)/lispintro/Makefile.in config.status
|
|
|
|
./config.status
|
|
|
|
|
1998-08-02 00:21:33 +00:00
|
|
|
oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
./config.status
|
|
|
|
|
1998-08-02 00:21:33 +00:00
|
|
|
lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status
|
1994-01-19 00:04:56 +00:00
|
|
|
./config.status
|
|
|
|
|
1998-08-02 00:21:33 +00:00
|
|
|
leim/Makefile: $(srcdir)/leim/Makefile.in config.status
|
1997-07-01 07:05:03 +00:00
|
|
|
./config.status
|
|
|
|
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
# ==================== Installation ====================
|
|
|
|
|
1993-01-26 01:58:16 +00:00
|
|
|
## If we let lib-src do its own installation, that means we
|
|
|
|
## don't have to duplicate the list of utilities to install in
|
|
|
|
## this Makefile as well.
|
* configure.in: Use the AC_ALLOCA test.
* Makefile.in (ALLOCA): New variable, to be set by ./configure.
(lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
* Makefile.in (install): Print out the name of the directory we're
copying, so people can have some idea of whether we're making
progress.
* Makefile.in (install.aix, install.xenix, install.sysv, install):
Don't forget to re-create the COPYDESTS directories after we clear
them out.
* Makefile.in: Add autoconf cookies so that the configure
script can comment out sections of path variable definitions to
choose between the installable configuration and the run-in-place
configuration.
* configure.in: Add new option `--run-in-place', to select the
run-in-place path definitions.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Make sure that each source directory exists, and is different from
the destination directory; then, delete the destination before
copying over the source.
1993-05-03 02:06:16 +00:00
|
|
|
|
1993-05-15 23:57:11 +00:00
|
|
|
## On AIX, use tar xBf.
|
|
|
|
## On Xenix, use tar xpf.
|
|
|
|
|
1994-04-23 01:07:04 +00:00
|
|
|
.PHONY: install mkdir
|
1994-01-19 00:04:56 +00:00
|
|
|
|
* configure.in: Use the AC_ALLOCA test.
* Makefile.in (ALLOCA): New variable, to be set by ./configure.
(lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
* Makefile.in (install): Print out the name of the directory we're
copying, so people can have some idea of whether we're making
progress.
* Makefile.in (install.aix, install.xenix, install.sysv, install):
Don't forget to re-create the COPYDESTS directories after we clear
them out.
* Makefile.in: Add autoconf cookies so that the configure
script can comment out sections of path variable definitions to
choose between the installable configuration and the run-in-place
configuration.
* configure.in: Add new option `--run-in-place', to select the
run-in-place path definitions.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Make sure that each source directory exists, and is different from
the destination directory; then, delete the destination before
copying over the source.
1993-05-03 02:06:16 +00:00
|
|
|
## We delete each directory in ${COPYDESTS} before we copy into it;
|
|
|
|
## that way, we can reinstall over directories that have been put in
|
|
|
|
## place with their files read-only (perhaps because they are checked
|
|
|
|
## into RCS). In order to make this safe, we make sure that the
|
|
|
|
## source exists and is distinct from the destination.
|
1996-03-17 15:24:35 +00:00
|
|
|
### We do install-arch-indep first because
|
|
|
|
### the executable needs the Lisp files and DOC file to work properly.
|
1997-11-07 19:18:45 +00:00
|
|
|
install: all install-arch-indep install-arch-dep install-leim blessmail
|
1995-10-23 17:01:39 +00:00
|
|
|
@true
|
1993-05-25 06:18:24 +00:00
|
|
|
|
1995-12-31 19:21:18 +00:00
|
|
|
### Install the executables that were compiled specifically for this machine.
|
1996-03-17 15:24:35 +00:00
|
|
|
### It would be nice to do something for a parallel make
|
|
|
|
### to ensure that install-arch-indep finishes before this starts.
|
|
|
|
install-arch-dep: mkdir
|
1993-05-25 06:18:24 +00:00
|
|
|
(cd lib-src; \
|
1993-09-28 09:41:00 +00:00
|
|
|
$(MAKE) install $(MFLAGS) prefix=${prefix} \
|
1994-10-11 21:36:30 +00:00
|
|
|
exec_prefix=${exec_prefix} bindir=${bindir} \
|
1996-08-29 20:54:02 +00:00
|
|
|
libexecdir=${libexecdir} archlibdir=${archlibdir} \
|
|
|
|
INSTALL_STRIP=${INSTALL_STRIP})
|
2003-02-08 17:27:58 +00:00
|
|
|
${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} ${bindir}/$(EMACSFULL)
|
2001-11-15 20:37:20 +00:00
|
|
|
-chmod 1755 ${bindir}/$(EMACSFULL)
|
1994-04-23 01:07:04 +00:00
|
|
|
rm -f ${bindir}/$(EMACS)
|
2001-11-15 20:37:20 +00:00
|
|
|
-ln ${bindir}/$(EMACSFULL) ${bindir}/$(EMACS)
|
2000-05-25 10:38:04 +00:00
|
|
|
-unset CDPATH; \
|
1998-11-29 16:42:04 +00:00
|
|
|
for f in `cd lib-src && echo fns-*.el`; do \
|
2000-05-25 16:40:12 +00:00
|
|
|
if test -r lib-src/$$f ; then \
|
|
|
|
${INSTALL_DATA} lib-src/$$f ${archlibdir}/$$f; \
|
|
|
|
else true; fi ; \
|
1998-10-30 09:51:57 +00:00
|
|
|
done
|
2003-01-07 05:46:31 +00:00
|
|
|
if test "${carbon_appdir}" != ""; then \
|
|
|
|
umask 022; mkdir -p ${carbon_appdir}/Emacs.app; \
|
2003-12-24 12:02:26 +00:00
|
|
|
(cd mac/Emacs.app; (tar -chf - . | \
|
2003-01-07 05:46:31 +00:00
|
|
|
(cd ${carbon_appdir}/Emacs.app; umask 022; tar -xvf - \
|
2003-12-24 12:02:26 +00:00
|
|
|
&& cat > /dev/null))) || exit 1; \
|
2003-01-07 05:46:31 +00:00
|
|
|
fi
|
1994-02-20 03:25:09 +00:00
|
|
|
|
1995-12-31 19:21:18 +00:00
|
|
|
### Install the files that are machine-independent.
|
|
|
|
### Most of them come straight from the distribution;
|
|
|
|
### the exception is the DOC-* files, which are copied
|
1997-07-02 06:45:51 +00:00
|
|
|
## from the build directory.
|
1995-12-31 19:21:18 +00:00
|
|
|
|
1997-07-02 06:45:51 +00:00
|
|
|
## Note that we copy DOC* and then delete DOC
|
|
|
|
## as a workaround for a bug in tar on Ultrix 4.2.
|
2002-05-18 19:52:17 +00:00
|
|
|
|
|
|
|
## If people complain about the h flag in tar command, take that out.
|
|
|
|
## That flag is also used in leim/Makefile.in
|
1999-12-04 19:24:27 +00:00
|
|
|
install-arch-indep: mkdir info
|
1992-04-19 08:53:55 +00:00
|
|
|
-set ${COPYDESTS} ; \
|
2000-06-13 16:25:11 +00:00
|
|
|
unset CDPATH; \
|
1995-12-31 19:21:18 +00:00
|
|
|
for dir in ${COPYDIR} ; do \
|
|
|
|
if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
|
|
|
|
rm -rf $$1 ; \
|
|
|
|
fi ; \
|
|
|
|
shift ; \
|
|
|
|
done
|
1993-05-26 18:27:58 +00:00
|
|
|
-set ${COPYDESTS} ; \
|
1995-12-31 19:21:18 +00:00
|
|
|
mkdir ${COPYDESTS} ; \
|
|
|
|
chmod ugo+rx ${COPYDESTS} ; \
|
2000-06-13 16:25:11 +00:00
|
|
|
unset CDPATH; \
|
1995-12-31 19:21:18 +00:00
|
|
|
for dir in ${COPYDIR} ; do \
|
|
|
|
dest=$$1 ; shift ; \
|
|
|
|
[ -d $${dir} ] \
|
|
|
|
&& [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
|
|
|
|
&& (echo "Copying $${dir} to $${dest}..." ; \
|
2001-10-22 17:38:17 +00:00
|
|
|
(cd $${dir}; tar -chf - . ) \
|
2000-12-27 11:48:37 +00:00
|
|
|
| (cd $${dest}; umask 022; \
|
|
|
|
tar -xvf - && cat > /dev/null) || exit 1; \
|
2003-01-31 15:24:20 +00:00
|
|
|
find $${dest} -exec chown $${LOGNAME:-$$USERNAME} {} ';' ;\
|
2000-05-10 18:02:16 +00:00
|
|
|
for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
|
1998-02-25 22:49:45 +00:00
|
|
|
chmod a+rx $${subdir} ; \
|
1995-12-31 19:21:18 +00:00
|
|
|
rm -rf $${subdir}/RCS ; \
|
|
|
|
rm -rf $${subdir}/CVS ; \
|
2001-04-05 13:52:09 +00:00
|
|
|
rm -f $${subdir}/.cvsignore ; \
|
2004-07-04 22:45:31 +00:00
|
|
|
rm -f $${subdir}/.arch-inventory ; \
|
1995-12-31 19:21:18 +00:00
|
|
|
rm -f $${subdir}/\#* ; \
|
|
|
|
rm -f $${subdir}/.\#* ; \
|
|
|
|
rm -f $${subdir}/*~ ; \
|
|
|
|
rm -f $${subdir}/*.orig ; \
|
|
|
|
rm -f $${subdir}/[mM]akefile* ; \
|
|
|
|
rm -f $${subdir}/ChangeLog* ; \
|
|
|
|
rm -f $${subdir}/dired.todo ; \
|
|
|
|
done) ; \
|
|
|
|
done
|
1994-10-16 10:00:36 +00:00
|
|
|
-rm -f ${lispdir}/subdirs.el
|
1995-04-06 21:36:55 +00:00
|
|
|
$(srcdir)/update-subdirs ${lispdir}
|
1998-05-14 04:58:47 +00:00
|
|
|
if [ -f ${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
|
|
|
|
then true; \
|
|
|
|
else \
|
|
|
|
(echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
|
|
|
|
echo " (normal-top-level-add-subdirs-to-load-path))") \
|
1998-05-15 00:25:16 +00:00
|
|
|
> ${datadir}/emacs/${version}/site-lisp/subdirs.el; \
|
1998-05-14 04:58:47 +00:00
|
|
|
fi
|
1998-04-28 21:15:12 +00:00
|
|
|
chmod a+r ${datadir}/emacs/${version}/site-lisp/subdirs.el
|
1998-06-01 03:46:31 +00:00
|
|
|
-if [ -f ${datadir}/emacs/site-lisp/subdirs.el ]; \
|
1998-05-14 04:58:47 +00:00
|
|
|
then true; \
|
|
|
|
else \
|
|
|
|
(echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
|
|
|
|
echo " (normal-top-level-add-subdirs-to-load-path))") \
|
1998-05-15 00:25:16 +00:00
|
|
|
> ${datadir}/emacs/site-lisp/subdirs.el; \
|
1998-05-14 04:58:47 +00:00
|
|
|
fi
|
1998-06-01 03:46:31 +00:00
|
|
|
-chmod a+r ${datadir}/emacs/site-lisp/subdirs.el
|
2000-05-25 10:38:04 +00:00
|
|
|
-unset CDPATH; \
|
1994-05-07 03:15:33 +00:00
|
|
|
if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
|
|
|
|
then \
|
1995-12-21 08:01:26 +00:00
|
|
|
echo "Copying etc/DOC-* to ${docdir} ..." ; \
|
2004-05-28 09:48:58 +00:00
|
|
|
(cd ./etc; tar -chf - DOC*) \
|
2002-03-03 13:08:14 +00:00
|
|
|
|(cd ${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
|
2004-05-28 09:48:58 +00:00
|
|
|
(cd $(docdir); chown $${LOGNAME:-$$USERNAME} DOC*; chmod a+r DOC*; \
|
2002-08-26 10:11:44 +00:00
|
|
|
if test "`echo DOC-*`" != "DOC-*"; then rm DOC; fi); \
|
1994-05-07 03:15:33 +00:00
|
|
|
else true; fi
|
2000-05-25 10:38:04 +00:00
|
|
|
-unset CDPATH; \
|
2002-12-08 13:18:02 +00:00
|
|
|
if [ -r ./lisp ] \
|
|
|
|
&& [ -r ./lisp/simple.el ] \
|
2002-12-08 13:59:29 +00:00
|
|
|
&& [ x`(cd ./lisp; /bin/pwd)` != x`(cd ${lispdir}; /bin/pwd)` ] \
|
|
|
|
&& [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
|
1996-02-12 19:53:16 +00:00
|
|
|
then \
|
|
|
|
echo "Copying lisp/*.el and lisp/*.elc to ${lispdir} ..." ; \
|
2002-12-08 13:18:02 +00:00
|
|
|
(cd lisp; tar -chf - *.el *.elc) \
|
2002-03-03 13:08:14 +00:00
|
|
|
|(cd ${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
|
2003-01-31 15:24:20 +00:00
|
|
|
(cd ${lispdir}; find . -exec chown $${LOGNAME:-$$USERNAME} {} ';') ; \
|
1996-02-12 19:53:16 +00:00
|
|
|
else true; fi
|
2000-05-25 10:38:04 +00:00
|
|
|
-unset CDPATH; \
|
2005-11-03 17:00:25 +00:00
|
|
|
if [ -n "${GZIP_PROG}" ]; \
|
2005-11-01 11:48:27 +00:00
|
|
|
then \
|
|
|
|
echo "Compressing *.el ..." ; \
|
|
|
|
(cd ${lispdir}; for f in `find . -name "*.elc" -print`; do \
|
2005-11-03 17:00:25 +00:00
|
|
|
${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
|
2005-11-01 11:48:27 +00:00
|
|
|
done) \
|
|
|
|
else true; fi
|
|
|
|
-unset CDPATH; \
|
1994-05-27 08:17:46 +00:00
|
|
|
thisdir=`/bin/pwd`; \
|
1993-06-02 05:16:03 +00:00
|
|
|
if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
|
1994-03-18 00:31:13 +00:00
|
|
|
then \
|
1995-09-06 15:18:29 +00:00
|
|
|
(cd ${infodir}; \
|
1998-04-28 21:15:12 +00:00
|
|
|
if [ -f dir ]; then true; \
|
|
|
|
else \
|
|
|
|
(cd $${thisdir}; \
|
|
|
|
${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir; \
|
|
|
|
chmod a+r ${infodir}/dir); \
|
1995-11-29 20:41:52 +00:00
|
|
|
fi; \
|
1995-09-06 15:18:29 +00:00
|
|
|
cd ${srcdir}/info ; \
|
2006-01-29 13:08:58 +00:00
|
|
|
for f in ada-mode* autotype* calc* ccmode* cl* dired-x* ebrowse* ediff* efaq* eintr* elisp* emacs* emacs-mime* emacs-xtra* eshell* eudc* flymake* forms* gnus* idlwave* info* message* mh-e* newsticker* org* pcl-cvs* pgg* reftex* sc* ses* sieve* speedbar* tramp* vip* widget* woman* smtpmail* url* rcirc* erc*; do \
|
1995-12-31 19:21:18 +00:00
|
|
|
(cd $${thisdir}; \
|
|
|
|
${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f; \
|
1998-05-07 21:31:00 +00:00
|
|
|
chmod a+r ${infodir}/$$f); \
|
1994-03-14 22:08:27 +00:00
|
|
|
done); \
|
1993-06-02 05:16:03 +00:00
|
|
|
else true; fi
|
1999-10-09 19:13:48 +00:00
|
|
|
-unset CDPATH; \
|
|
|
|
thisdir=`/bin/pwd`; \
|
1998-05-07 21:31:00 +00:00
|
|
|
if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
|
|
|
|
then \
|
2006-01-29 13:08:58 +00:00
|
|
|
for f in ada-mode autotype calc ccmode cl dired-x ebrowse ediff efaq elisp eintr emacs emacs-mime emacs-xtra eshell eudc flymake forms gnus idlwave info message mh-e newsticker org pcl-cvs pgg reftex sc ses sieve speedbar tramp vip viper widget woman smtpmail url rcirc erc; do \
|
1998-05-07 21:31:00 +00:00
|
|
|
(cd $${thisdir}; \
|
2000-10-29 17:36:49 +00:00
|
|
|
${INSTALL_INFO} --info-dir=${infodir} ${infodir}/$$f); \
|
1998-05-07 21:31:00 +00:00
|
|
|
done; \
|
|
|
|
else true; fi
|
1999-04-09 19:23:31 +00:00
|
|
|
-chmod -R a+r ${datadir}/emacs ${COPYDESTS} ${infodir}
|
1995-12-31 19:21:18 +00:00
|
|
|
thisdir=`/bin/pwd`; \
|
|
|
|
cd ${srcdir}/etc; \
|
2001-11-23 11:15:02 +00:00
|
|
|
for page in emacs emacsclient etags ctags ; do \
|
1995-12-31 19:21:18 +00:00
|
|
|
(cd $${thisdir}; \
|
|
|
|
${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${man1dir}/$${page}${manext}; \
|
|
|
|
chmod a+r ${man1dir}/$${page}${manext}); \
|
1992-12-24 05:56:33 +00:00
|
|
|
done
|
1992-03-21 07:56:45 +00:00
|
|
|
|
1997-07-02 06:45:51 +00:00
|
|
|
### Install LEIM files. Although they are machine-independent, we
|
|
|
|
### have separate target here instead of including it in
|
|
|
|
### `install-arch-indep'. People who extracted LEIM files after they
|
|
|
|
### insalled Emacs itself can install only LEIM files by this target.
|
1997-09-17 00:35:15 +00:00
|
|
|
install-leim: leim/Makefile mkdir
|
1997-07-05 00:20:22 +00:00
|
|
|
cd leim; $(MAKE) install
|
1997-07-02 06:45:51 +00:00
|
|
|
|
1996-03-20 14:51:42 +00:00
|
|
|
### Build Emacs and install it, stripping binaries while installing them.
|
|
|
|
install-strip:
|
1999-12-04 19:24:27 +00:00
|
|
|
$(MAKE) INSTALL_STRIP=-s install
|
1996-03-20 14:51:42 +00:00
|
|
|
|
1992-12-24 05:56:33 +00:00
|
|
|
### Build all the directories we're going to install Emacs in. Since
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
### we may be creating several layers of directories (for example,
|
1994-10-12 23:29:23 +00:00
|
|
|
### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
|
1994-11-23 20:25:48 +00:00
|
|
|
### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
|
1994-09-16 23:36:57 +00:00
|
|
|
mkdir: FRC
|
1999-04-09 19:23:31 +00:00
|
|
|
if [ -d ${datadir} ]; then true; else \
|
|
|
|
$(srcdir)/mkinstalldirs ${datadir}; \
|
|
|
|
chmod a+r ${datadir};\
|
|
|
|
fi
|
1997-08-07 18:37:17 +00:00
|
|
|
$(srcdir)/mkinstalldirs ${COPYDESTS} ${infodir} ${man1dir} \
|
1999-04-09 19:23:31 +00:00
|
|
|
${bindir} ${docdir} ${libexecdir} \
|
1998-04-28 21:15:12 +00:00
|
|
|
${datadir}/emacs/site-lisp \
|
|
|
|
${datadir}/emacs/${version}/site-lisp \
|
1994-07-07 02:44:58 +00:00
|
|
|
`echo ${locallisppath} | sed 's/:/ /g'`
|
1992-01-14 07:27:56 +00:00
|
|
|
|
1993-06-16 23:46:17 +00:00
|
|
|
### Delete all the installed files that the `install' target would
|
|
|
|
### create (but not the noninstalled files such as `make all' would
|
|
|
|
### create).
|
1993-06-17 00:50:19 +00:00
|
|
|
###
|
|
|
|
### Don't delete the lisp and etc directories if they're in the source tree.
|
1993-06-16 23:46:17 +00:00
|
|
|
uninstall:
|
1993-06-17 00:50:19 +00:00
|
|
|
(cd lib-src; \
|
1993-09-28 09:41:00 +00:00
|
|
|
$(MAKE) $(MFLAGS) uninstall \
|
1993-06-17 00:50:19 +00:00
|
|
|
prefix=${prefix} exec_prefix=${exec_prefix} \
|
1994-10-11 21:36:30 +00:00
|
|
|
bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
|
2000-05-25 10:38:04 +00:00
|
|
|
-unset CDPATH; \
|
1993-06-17 00:50:19 +00:00
|
|
|
for dir in ${lispdir} ${etcdir} ; do \
|
1994-05-08 19:51:59 +00:00
|
|
|
if [ -d $${dir} ]; then \
|
1994-05-27 08:17:46 +00:00
|
|
|
case `(cd $${dir} ; /bin/pwd)` in \
|
|
|
|
`(cd ${srcdir} ; /bin/pwd)`* ) ;; \
|
1994-05-08 19:51:59 +00:00
|
|
|
* ) rm -rf $${dir} ;; \
|
|
|
|
esac ; \
|
|
|
|
case $${dir} in \
|
|
|
|
${datadir}/emacs/${version}/* ) \
|
|
|
|
rm -rf ${datadir}/emacs/${version} \
|
|
|
|
;; \
|
|
|
|
esac ; \
|
|
|
|
fi ; \
|
1993-06-17 00:50:19 +00:00
|
|
|
done
|
2001-02-02 12:31:50 +00:00
|
|
|
(cd ${archlibdir} && rm -f fns-*)
|
2001-02-02 13:04:00 +00:00
|
|
|
-rm -rf ${libexecdir}/emacs/${version}
|
2006-01-29 13:08:58 +00:00
|
|
|
(cd ${infodir} && rm -f cl* ada-mode* autotype* calc* ccmode* ebrowse* efaq* eintr elisp* eshell* eudc* idlwave* message* pcl-cvs* reftex* speedbar* tramp* widget* woman* dired-x* ediff* emacs* emacs-xtra* flymake* forms* gnus* info* mh-e* newsticker* org* sc* ses* vip* smtpmail* url* rcirc* erc*)
|
2001-11-23 11:15:02 +00:00
|
|
|
(cd ${man1dir} && rm -f emacs${manext} emacsclient${manext} etags${manext} ctags${manext})
|
2001-11-15 21:55:21 +00:00
|
|
|
(cd ${bindir} && rm -f $(EMACSFULL) $(EMACS))
|
1993-06-16 23:46:17 +00:00
|
|
|
|
|
|
|
|
1994-09-16 23:36:57 +00:00
|
|
|
FRC:
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
|
|
|
|
# ==================== Cleaning up and miscellanea ====================
|
|
|
|
|
1995-02-07 23:55:01 +00:00
|
|
|
.PHONY: mostlyclean clean distclean maintainer-clean extraclean
|
1994-01-19 00:04:56 +00:00
|
|
|
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
### `mostlyclean'
|
1993-06-16 23:46:17 +00:00
|
|
|
### Like `clean', but may refrain from deleting a few files that people
|
|
|
|
### normally don't want to recompile. For example, the `mostlyclean'
|
|
|
|
### target for GCC does not delete `libgcc.a', because recompiling it
|
|
|
|
### is rarely necessary and takes a lot of time.
|
1994-09-16 23:36:57 +00:00
|
|
|
mostlyclean: FRC
|
1993-09-28 09:41:00 +00:00
|
|
|
(cd src; $(MAKE) $(MFLAGS) mostlyclean)
|
|
|
|
(cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
|
1994-01-19 00:04:56 +00:00
|
|
|
(cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
|
1993-09-28 09:41:00 +00:00
|
|
|
(cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
|
1994-05-21 07:18:39 +00:00
|
|
|
-(cd man && $(MAKE) $(MFLAGS) mostlyclean)
|
2001-11-10 14:43:58 +00:00
|
|
|
-(cd lispref && $(MAKE) $(MFLAGS) mostlyclean)
|
2001-11-24 10:47:42 +00:00
|
|
|
-(cd lispintro && $(MAKE) $(MFLAGS) mostlyclean)
|
1997-07-09 06:55:18 +00:00
|
|
|
(cd leim; $(MAKE) $(MFLAGS) mostlyclean)
|
1993-06-16 23:46:17 +00:00
|
|
|
|
|
|
|
### `clean'
|
|
|
|
### Delete all files from the current directory that are normally
|
|
|
|
### created by building the program. Don't delete the files that
|
|
|
|
### record the configuration. Also preserve files that could be made
|
|
|
|
### by building, but normally aren't because the distribution comes
|
|
|
|
### with them.
|
2003-02-04 14:56:31 +00:00
|
|
|
###
|
1993-06-16 23:46:17 +00:00
|
|
|
### Delete `.dvi' files here if they are not part of the distribution.
|
1994-09-16 23:36:57 +00:00
|
|
|
clean: FRC
|
1993-09-28 09:41:00 +00:00
|
|
|
(cd src; $(MAKE) $(MFLAGS) clean)
|
|
|
|
(cd oldXMenu; $(MAKE) $(MFLAGS) clean)
|
1994-01-19 00:04:56 +00:00
|
|
|
(cd lwlib; $(MAKE) $(MFLAGS) clean)
|
1993-09-28 09:41:00 +00:00
|
|
|
(cd lib-src; $(MAKE) $(MFLAGS) clean)
|
1994-05-21 07:18:39 +00:00
|
|
|
-(cd man && $(MAKE) $(MFLAGS) clean)
|
2001-11-10 14:43:58 +00:00
|
|
|
-(cd lispref && $(MAKE) $(MFLAGS) clean)
|
2001-11-24 10:47:42 +00:00
|
|
|
-(cd lispintro && $(MAKE) $(MFLAGS) clean)
|
1997-07-09 06:55:18 +00:00
|
|
|
(cd leim; $(MAKE) $(MFLAGS) clean)
|
1992-04-19 08:53:55 +00:00
|
|
|
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
### `distclean'
|
1993-06-16 23:46:17 +00:00
|
|
|
### Delete all files from the current directory that are created by
|
|
|
|
### configuring or building the program. If you have unpacked the
|
|
|
|
### source and built the program without creating any other files,
|
|
|
|
### `make distclean' should leave only the files that were in the
|
|
|
|
### distribution.
|
|
|
|
top_distclean=\
|
1995-06-24 18:43:39 +00:00
|
|
|
rm -f config.status config.cache config.log ; \
|
1993-06-16 23:46:17 +00:00
|
|
|
rm -f Makefile ${SUBDIR_MAKEFILES} ; \
|
1998-03-24 05:41:22 +00:00
|
|
|
if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi
|
1994-09-16 23:36:57 +00:00
|
|
|
distclean: FRC
|
1993-09-28 09:41:00 +00:00
|
|
|
(cd src; $(MAKE) $(MFLAGS) distclean)
|
|
|
|
(cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
|
1994-01-19 00:04:56 +00:00
|
|
|
(cd lwlib; $(MAKE) $(MFLAGS) distclean)
|
1993-09-28 09:41:00 +00:00
|
|
|
(cd lib-src; $(MAKE) $(MFLAGS) distclean)
|
1994-05-21 07:18:39 +00:00
|
|
|
(cd man && $(MAKE) $(MFLAGS) distclean)
|
2001-11-10 14:43:58 +00:00
|
|
|
(cd lispref && $(MAKE) $(MFLAGS) distclean)
|
2001-11-24 10:47:42 +00:00
|
|
|
(cd lispintro && $(MAKE) $(MFLAGS) distclean)
|
1997-07-09 06:55:18 +00:00
|
|
|
(cd leim; $(MAKE) $(MFLAGS) distclean)
|
2000-06-16 18:54:11 +00:00
|
|
|
(cd lisp; $(MAKE) $(MFLAGS) distclean)
|
1993-06-16 23:46:17 +00:00
|
|
|
${top_distclean}
|
1992-04-19 08:53:55 +00:00
|
|
|
|
1995-02-07 23:55:01 +00:00
|
|
|
### `maintainer-clean'
|
1993-06-16 23:46:17 +00:00
|
|
|
### Delete everything from the current directory that can be
|
|
|
|
### reconstructed with this Makefile. This typically includes
|
|
|
|
### everything deleted by distclean, plus more: C source files
|
|
|
|
### produced by Bison, tags tables, info files, and so on.
|
2003-02-04 14:56:31 +00:00
|
|
|
###
|
1995-02-07 23:55:01 +00:00
|
|
|
### One exception, however: `make maintainer-clean' should not delete
|
1993-06-16 23:46:17 +00:00
|
|
|
### `configure' even if `configure' can be remade using a rule in the
|
1995-02-07 23:55:01 +00:00
|
|
|
### Makefile. More generally, `make maintainer-clean' should not delete
|
1993-06-16 23:46:17 +00:00
|
|
|
### anything that needs to exist in order to run `configure' and then
|
|
|
|
### begin to build the program.
|
1995-02-07 23:55:01 +00:00
|
|
|
maintainer-clean: FRC
|
|
|
|
(cd src; $(MAKE) $(MFLAGS) maintainer-clean)
|
|
|
|
(cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
|
|
|
|
(cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
|
|
|
|
(cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
|
|
|
|
-(cd man && $(MAKE) $(MFLAGS) maintainer-clean)
|
2001-11-10 14:43:58 +00:00
|
|
|
-(cd lispref && $(MAKE) $(MFLAGS) maintainer-clean)
|
2001-11-24 10:47:42 +00:00
|
|
|
-(cd lispintro && $(MAKE) $(MFLAGS) maintainer-clean)
|
1997-07-09 06:55:18 +00:00
|
|
|
(cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
|
2004-03-02 22:11:53 +00:00
|
|
|
(cd lisp; $(MAKE) $(MFLAGS) maintainer-clean)
|
1993-06-16 23:46:17 +00:00
|
|
|
${top_distclean}
|
1992-04-19 08:53:55 +00:00
|
|
|
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
### This doesn't actually appear in the coding standards, but Karl
|
|
|
|
### says GCC supports it, and that's where the configuration part of
|
|
|
|
### the coding standards seem to come from. It's like distclean, but
|
|
|
|
### it deletes backup and autosave files too.
|
|
|
|
extraclean:
|
2001-03-29 14:24:43 +00:00
|
|
|
for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
|
1996-01-25 06:59:38 +00:00
|
|
|
${top_distclean}
|
2001-01-28 23:37:58 +00:00
|
|
|
-rm -f config-tmp-*
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
-rm -f *~ \#*
|
|
|
|
|
1993-03-19 07:37:19 +00:00
|
|
|
### Unlocking and relocking. The idea of these productions is to reduce
|
|
|
|
### hassles when installing an incremental tar of Emacs. Do `make unlock'
|
|
|
|
### before unlocking the file to take the write locks off all sources so
|
|
|
|
### that tar xvof will overwrite them without fuss. Then do `make relock'
|
|
|
|
### afterward so that VC mode will know which files should be checked in
|
|
|
|
### if you want to mung them.
|
|
|
|
###
|
|
|
|
### Note: it's no disaster if these productions miss a file or two; tar
|
|
|
|
### and VC will swiftly let you know if this happens, and it is easily
|
|
|
|
### corrected.
|
2001-10-31 14:42:25 +00:00
|
|
|
SOURCES = ChangeLog FTP INSTALL Makefile.in \
|
1994-10-13 04:04:30 +00:00
|
|
|
README configure make-dist move-if-change
|
1993-03-19 07:37:19 +00:00
|
|
|
|
1994-01-19 00:04:56 +00:00
|
|
|
.PHONY: unlock relock
|
|
|
|
|
1993-03-19 07:37:19 +00:00
|
|
|
unlock:
|
1997-12-04 06:03:22 +00:00
|
|
|
chmod u+w $(SOURCES)
|
1993-03-19 07:37:19 +00:00
|
|
|
-(cd elisp; chmod u+w Makefile README *.texi)
|
1993-09-28 09:41:00 +00:00
|
|
|
(cd etc; $(MAKE) $(MFLAGS) unlock)
|
|
|
|
(cd lib-src; $(MAKE) $(MFLAGS) unlock)
|
|
|
|
(cd lisp; $(MAKE) $(MFLAGS) unlock)
|
1993-03-19 07:37:19 +00:00
|
|
|
(cd lisp/term; chmod u+w README *.el)
|
|
|
|
(cd man; chmod u+w *texi* ChangeLog split-man)
|
2001-11-10 14:43:58 +00:00
|
|
|
(cd lispref; chmod u+w *texi* ChangeLog)
|
2001-11-24 10:47:42 +00:00
|
|
|
(cd lispintro; chmod u+w *texi* ChangeLog)
|
1993-03-19 07:37:19 +00:00
|
|
|
(cd oldXMenu; chmod u+w *.[ch] Makefile README)
|
1994-01-19 00:04:56 +00:00
|
|
|
(cd lwlib; chmod u+w *.[ch] Makefile README)
|
1993-09-28 09:41:00 +00:00
|
|
|
(cd src; $(MAKE) $(MFLAGS) unlock)
|
1993-03-19 07:37:19 +00:00
|
|
|
|
|
|
|
relock:
|
1997-12-04 06:03:22 +00:00
|
|
|
chmod u-w $(SOURCES)
|
1993-03-19 07:37:19 +00:00
|
|
|
-(cd elisp; chmod u-w Makefile README *.texi)
|
1993-09-28 09:41:00 +00:00
|
|
|
(cd etc; $(MAKE) $(MFLAGS) relock)
|
|
|
|
(cd lib-src; $(MAKE) $(MFLAGS) relock)
|
|
|
|
(cd lisp; $(MAKE) $(MFLAGS) relock)
|
1993-03-19 07:37:19 +00:00
|
|
|
(cd lisp/term; chmod u+w README *.el)
|
|
|
|
(cd man; chmod u+w *texi* ChangeLog split-man)
|
2001-11-10 14:43:58 +00:00
|
|
|
(cd lispref; chmod u+w *texi* ChangeLog)
|
2001-11-24 10:47:42 +00:00
|
|
|
(cd lispintro; chmod u+w *texi* ChangeLog)
|
1993-03-19 07:37:19 +00:00
|
|
|
(cd oldXMenu; chmod u+w *.[ch] Makefile README)
|
1994-01-19 00:04:56 +00:00
|
|
|
(cd lwlib; chmod u+w *.[ch] Makefile README)
|
1993-09-28 09:41:00 +00:00
|
|
|
(cd src; $(MAKE) $(MFLAGS) relock)
|
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the info files in ${infodir}. Install the executable
under both `emacs' and `emacs-VERSION'.
* Makefile.in: Doc fix.
* Makefile.in (exec_prefix): New variable, as per latest version
of coding standards.
(bindir, libdir): Use it, instead of `prefix'.
(lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
* Makefile.in (mandir): Make the default value for this depend on
$(prefix).
* Makefile.in (datadir, statedir, libdir): Make these all default
to ${prefix}/lib.
(lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
to compensate.
* Makefile.in (install, install.sysv, install.xenix, install.aix):
Install the etags and ctags man pages too.
* Makefile.in (distclean): Don't delete backup files; that's the
job of extraclean.
(extraclean): Like distclean, but deletes backup and autosave files.
Make path specification conform to GNU coding standards.
* configure (long_usage): Remove all traces of old arguments from
usage messages, and document the options we do accept in more
detail: -with-x... and --srcdir.
(options, boolean_opts): Deleted; we don't have enough options to
make this worthwhile.
(prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
along with the code which supported them; these should be set as
arguments to the top-level make.
(config_h_opts): Since this no longer doubles as a list of option
names, make them upper case; this simplifies the code which uses
them to build the sed command to edit src/config.h. Change the
code which sets them.
(cc, g, O): Don't allow the user to set these using options; they
should be specified using `CC=' and `CFLAGS=' arguments to the
top-level make. Just choose reasonable default values for them,
and edit them into Makefile.in's default CC and CONFIG_CFLAGS
values.
(gnu_malloc, rel_alloc): Don't allow the user to set these using
options; use them whenever the configuration files say they're
possible.
Simplify the argument processing loop. Don't accept abbreviations
for option names; these might conflict with other configuration
options in the future.
Add some support for the `--srcdir' option. Check for the sources
in . and .. if `--srcdir' is omitted. If the directories we will
compile in don't exist yet, create them under the current directory.
Note that the rest of the build process doesn't really support
this.
Edit only the top Makefile. That should edit the others. Edit
into the makefile: `version', from lisp/version.el, `configname'
and `srcdir' from the configuration arguments, `CC' and
`CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
the user's path, and LOADLIBES as gleaned from the system
description files.
Simplify the report generated; it doesn't need to include any
description of paths now.
Make `config.status' exec configure instead of just calling it, so
there's no harm in overwriting `config.status'.
* Makefile.in (version, configname): New variables, used to choose
the default values for datadir and libdir.
Path variables rearranged into two clearer groups:
- In the first group are the variables specified by the GNU coding
standards (prefix, bindir, datadir, statedir, libdir, mandir,
manext, infodir, and srcdir).
- In the second are the variables actually used for Emacs's paths
(lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
archlibdir), which depend on the first category.
datadir and libdir default to directories under
${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
demand.
etcdir and lispdir default to subdirectories of datadir.
archlibdir defaults to libdir.
The new installation tree is a bit deeper than it used to be, so
use the new make-path program in lib-src to build them all.
Always build a new src/paths.h.tmp and then move-if-change it to
src/paths.h, to avoid unnecessary rebuilds while responding to the
right changes.
Remove all mention of arch-lib. Run utility commands from
lib-src, and let the executables be copied into archlibdir when
Emacs is installed.
Add targets for src/Makefile, lib-src/Makefile, and
oldXMenu/Makefile, editing the values of the path variables into
them.
Let lib-src do its own installation.
(datadir): Default to putting data files under
${prefix}/lib/emacs/${version}, not /usr/local/emacs.
(emacsdir): Variable deleted; it would only be confusing to use.
(lispdir, etcdir): Default to ${datadir}/lisp.
(mkdir): Use make-path for this.
(lockdir): Do this in mkdir.
(Makefile): New target.
1992-12-12 15:42:14 +00:00
|
|
|
|
2000-12-05 17:02:50 +00:00
|
|
|
# The src subdir knows how to do the right thing
|
|
|
|
# even when the build directory and source dir are different.
|
2001-01-25 11:42:55 +00:00
|
|
|
TAGS tags: lib-src src
|
1997-09-03 23:08:18 +00:00
|
|
|
cd src; $(MAKE) tags
|
1992-04-19 08:53:55 +00:00
|
|
|
|
|
|
|
check:
|
|
|
|
@echo "We don't have any tests for GNU Emacs yet."
|
1992-04-24 08:11:54 +00:00
|
|
|
|
|
|
|
dist:
|
2000-01-31 14:01:49 +00:00
|
|
|
cd ${srcdir}; ./make-dist
|
1993-06-16 23:46:17 +00:00
|
|
|
|
2000-05-10 18:02:16 +00:00
|
|
|
.PHONY: info dvi dist check html
|
1993-12-24 02:28:35 +00:00
|
|
|
force-info:
|
2000-12-05 17:02:50 +00:00
|
|
|
# Note that man/Makefile knows how to
|
|
|
|
# put the info files in $(srcdir),
|
|
|
|
# so we can do ok running make in the build dir.
|
1993-12-24 02:28:35 +00:00
|
|
|
info: force-info
|
2005-09-15 12:36:49 +00:00
|
|
|
-(cd man; $(MAKE) $(MFLAGS) info)
|
|
|
|
-(cd lispref; $(MAKE) $(MFLAGS) info)
|
|
|
|
-(cd lispintro; $(MAKE) $(MFLAGS) info)
|
1993-06-16 23:46:17 +00:00
|
|
|
dvi:
|
1994-11-23 20:25:48 +00:00
|
|
|
(cd man; $(MAKE) $(MFLAGS) dvi)
|
2001-11-10 14:43:58 +00:00
|
|
|
(cd lispref; $(MAKE) $(MFLAGS) elisp.dvi)
|
2001-11-24 10:47:42 +00:00
|
|
|
(cd lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
|
1999-10-23 13:22:51 +00:00
|
|
|
|
|
|
|
#### Bootstrapping.
|
|
|
|
|
|
|
|
### This is meant for Emacs maintainers only. It first cleans the
|
|
|
|
### lisp subdirectory, removing all compiled Lisp files. Then a
|
|
|
|
### special emacs executable is built from Lisp sources, which is then
|
|
|
|
### used to compile Lisp files. The last step is a "normal" make.
|
|
|
|
|
2002-09-11 21:00:08 +00:00
|
|
|
.PHONY: bootstrap
|
2004-11-07 23:27:18 +00:00
|
|
|
.PHONY: bootstrap-build
|
|
|
|
.PHONY: bootfast
|
2001-10-25 07:13:22 +00:00
|
|
|
.PHONY: maybe_bootstrap
|
|
|
|
|
|
|
|
maybe_bootstrap:
|
2002-11-07 01:02:44 +00:00
|
|
|
@bar="`echo $(srcdir)/lisp/*.elc`"; \
|
2002-11-07 02:26:44 +00:00
|
|
|
if [ \( "$$bar" = '$(srcdir)/lisp/*.elc' \) -o \( "$$bar" = '' \) ]; then \
|
2002-09-15 01:53:47 +00:00
|
|
|
echo "Your tree does not include the compiled Lisp files."; \
|
|
|
|
echo "You need to do \`make bootstrap' to build Emacs."; \
|
|
|
|
echo "Emacs now requires Texinfo version 4.2."; \
|
2002-02-13 15:47:55 +00:00
|
|
|
exit 1;\
|
2001-10-25 07:13:22 +00:00
|
|
|
fi
|
2001-03-30 15:58:27 +00:00
|
|
|
|
2005-11-01 20:44:42 +00:00
|
|
|
bootstrap: bootstrap-clean-before FRC
|
|
|
|
$(MAKE) $(MFLAGS) info bootstrap-build
|
2004-11-07 23:27:18 +00:00
|
|
|
|
2005-11-01 20:44:42 +00:00
|
|
|
bootfast: bootstrap-clean-before-fast FRC
|
|
|
|
$(MAKE) $(MFLAGS) info bootstrap-build
|
2004-11-07 23:27:18 +00:00
|
|
|
|
|
|
|
bootstrap-build: FRC
|
2004-03-02 22:11:53 +00:00
|
|
|
(cd lisp; $(MAKE) $(MFLAGS) bootstrap-prepare)
|
2000-03-26 14:13:03 +00:00
|
|
|
(cd src; $(MAKE) $(MFLAGS) bootstrap)
|
2003-02-08 17:27:58 +00:00
|
|
|
(cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs${EXEEXT})
|
2002-09-11 21:00:08 +00:00
|
|
|
(cd src; $(MAKE) $(MFLAGS) mostlyclean)
|
|
|
|
$(MAKE) $(MFLAGS) all
|
2003-01-22 17:13:08 +00:00
|
|
|
(cd lisp; $(MAKE) $(MFLAGS) bootstrap-after)
|
2001-03-30 15:58:27 +00:00
|
|
|
|
2001-11-26 11:00:17 +00:00
|
|
|
### Used for `bootstrap' to avoid deleting existing dumped Emacs executables.
|
2004-11-07 23:27:18 +00:00
|
|
|
bootstrap-clean-before: bootstrap-clean-before-fast FRC
|
|
|
|
(cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
|
|
|
|
|
2004-11-08 16:40:33 +00:00
|
|
|
### Used for `bootfast' to avoid deleting existing dumped Emacs executables
|
|
|
|
### and compiled .elc files.
|
2004-11-07 23:27:18 +00:00
|
|
|
bootstrap-clean-before-fast: FRC
|
2001-11-26 11:00:17 +00:00
|
|
|
(cd src; $(MAKE) $(MFLAGS) mostlyclean)
|
|
|
|
(cd oldXMenu; $(MAKE) $(MFLAGS) clean)
|
|
|
|
(cd lwlib; $(MAKE) $(MFLAGS) clean)
|
|
|
|
(cd lib-src; $(MAKE) $(MFLAGS) clean)
|
|
|
|
-(cd man && $(MAKE) $(MFLAGS) clean)
|
|
|
|
-(cd lispref && $(MAKE) $(MFLAGS) clean)
|
|
|
|
-(cd lispintro && $(MAKE) $(MFLAGS) clean)
|
|
|
|
(cd leim; $(MAKE) $(MFLAGS) clean)
|