emacs/test/Makefile.in

### @configure_input@

# Copyright (C) 2010-2016 Free Software Foundation, Inc.

# This file is part of GNU Emacs.

# GNU Emacs is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.

### Commentary:

## Some targets:
## check: re-run all tests, writing to .log files.
## check-maybe: run all tests which are outdated with their .log file
## or the source files they are testing.
## filename.log: run tests from filename.el(c) if .log file needs updating
## filename: re-run tests from filename.el(c), with no logging

### Code:

SHELL = @SHELL@

srcdir = @srcdir@
VPATH = $(srcdir)

MKDIR_P = @MKDIR_P@

SEPCHAR = @SEPCHAR@

# We never change directory before running Emacs, so a relative file
# name is fine, and makes life easier.  If we need to change
# directory, we can use emacs --chdir.
EMACS = ../src/emacs

EMACS_EXTRAOPT=

# Command line flags for Emacs.
# Apparently MSYS bash would convert "-L :" to "-L ;" anyway,
# but we might as well be explicit.
EMACSOPT = -batch --no-site-file --no-site-lisp -L "$(SEPCHAR)$(srcdir)" $(EMACS_EXTRAOPT)

# Prevent any settings in the user environment causing problems.
unexport EMACSDATA EMACSDOC EMACSPATH GREP_OPTIONS

## To run tests under a debugger, set this to eg: "gdb --args".
GDB =

# The locale to run tests under.  Tests should work if this is set to
# any supported locale.  Use the C locale by default, as it should be
# supported everywhere.
TEST_LOCALE = C

# The actual Emacs command run in the targets below.
# Prevent any setting of EMACSLOADPATH in user environment causing problems.
emacs = EMACSLOADPATH= LC_ALL=$(TEST_LOCALE) EMACS_TEST_DIRECTORY=$(srcdir) \
 $(GDB) "$(EMACS)" $(EMACSOPT)

.PHONY: all check

all: check

%.elc: %.el
	@echo Compiling $<
	@$(emacs) -f batch-byte-compile $<

## Ignore any test errors so we can continue to test other files.
## But compilation errors are always fatal.
WRITE_LOG = > $@ 2>&1 || { stat=ERROR; cat $@; }; echo $$stat: $@

## I'd prefer to use -emacs -f ert-run-tests-batch-and-exit rather
## than || true, since the former makes problems more obvious.
## I'd also prefer to @-hide the grep part and not the
## ert-run-tests-batch-and-exit part.
##
## We need to use $loadfile because:
## i) -L :$srcdir -l basename does not work, because we have files whose
## basename duplicates a file in lisp/ (eg eshell.el).
## ii) Although -l basename will automatically load .el or .elc,
## -l ./basename treats basename as a literal file (it would be nice
## to change this; bug#17848 - if that gets done, this can be simplified).
##
## Beware: it approximates 'no-byte-compile', so watch out for false-positives!
SELECTOR_DEFAULT = (quote (not (tag :expensive-test)))
SELECTOR_EXPENSIVE = nil
ifdef SELECTOR
SELECTOR_ACTUAL=$(SELECTOR)
else ifndef MAKECMDGOALS
SELECTOR_ACTUAL=$(SELECTOR_DEFAULT)
else ifeq ($(MAKECMDGOALS),all)
SELECTOR_ACTUAL=$(SELECTOR_DEFAULT)
else ifeq ($(MAKECMDGOALS),check)
SELECTOR_ACTUAL=$(SELECTOR_DEFAULT)
else ifeq ($(MAKECMDGOALS),check-maybe)
SELECTOR_ACTUAL=$(SELECTOR_DEFAULT)
else
SELECTOR_ACTUAL=$(SELECTOR_EXPENSIVE)
endif


%.log: %.el
	@if grep '^;.*no-byte-compile: t' $< > /dev/null; then \
	  loadfile=$<; \
	else \
	  loadfile=$<c; \
	  ${MAKE} $$loadfile; \
	fi; \
	echo Testing $$loadfile; \
	stat=OK ; \
	${MKDIR_P} $(dir $@) ; \
	$(emacs) -l ert -l $$loadfile \
	  --eval "(ert-run-tests-batch-and-exit ${SELECTOR_ACTUAL})" ${WRITE_LOG}

ELFILES = $(shell find ${srcdir} -path "${srcdir}/manual" -prune -o \
		-path "*resources" -prune -o -name "*el" -print)
## .elc files may be in a different directory for out of source builds
ELCFILES = $(patsubst %.el,%.elc, \
		$(patsubst $(srcdir)%,.%,$(ELFILES)))
LOGFILES = $(patsubst %.elc,%.log,${ELCFILES})
LOGSAVEFILES  = $(patsubst %.elc,%.log~,${ELCFILES})
TESTS = $(subst ${srcdir}/,,$(LOGFILES:.log=))

## If we have to interrupt a hanging test, preserve the log so we can
## see what the problem was.
.PRECIOUS: %.log

.PHONY: ${TESTS}

## The short aliases that always re-run the tests, with no logging.
## Define an alias both with and without the directory name for ease
## of use.
define test_template
$(1):
	@test ! -f ./$(1).log || mv ./$(1).log ./$(1).log~
	@${MAKE} ./$(1).log WRITE_LOG=

$(notdir $(1)): $(1)
endef

$(foreach test,${TESTS},$(eval $(call test_template,${test})))

## Include dependencies between test files and the files they test.
## We could do this without the file and eval directly, but then we
## would have to run Emacs for every make invocation, and it might not
## be available during clean.
-include make-test-deps.mk
## Rerun all default tests.
check: mostlyclean
	@${MAKE} check-doit SELECTOR="${SELECTOR_ACTUAL}"

## Rerun all default and expensive tests.
.PHONY: check-expensive
check-expensive: mostlyclean
	@${MAKE} check-doit SELECTOR="${SELECTOR_EXPENSIVE}"

## Re-run all tests which are outdated. A test is outdated if its
## logfile is out-of-date with either the test file, or the source
## files that the tests depend on. The source file dependencies are
## determined by a heuristic and does not identify the full dependency
## graph. See make-test-deps.emacs-lisp for details.
.PHONY: check-maybe
check-maybe:
	@${MAKE} check-doit SELECTOR="${SELECTOR_ACTUAL}"

## Run the tests.
.PHONY: check-doit
check-doit: ${LOGFILES}
	$(emacs) -l ert -f ert-summarize-tests-batch-and-exit $^

.PHONY: mostlyclean clean bootstrap-clean distclean maintainer-clean

mostlyclean:
	-@for f in ${LOGFILES}; do test ! -f $$f || mv $$f $$f~; done

clean:
	-rm -f ${LOGFILES} ${LOGSAVEFILES}
	-rm make-test-deps.mk

bootstrap-clean: clean
	-rm -f ${ELCFILES}

distclean: clean
	rm -f Makefile

maintainer-clean: distclean bootstrap-clean

make-test-deps.mk: $(ELFILES) make-test-deps.emacs-lisp
	$(EMACS) --batch -l $(srcdir)/make-test-deps.emacs-lisp \
	--eval "(make-test-deps \"$(srcdir)\")" \
	2> $@
# Makefile ends here.