emacs/lisp/vc-dispatcher.el

;;; vc-dispatcher.el -- generic command-dispatcher facility.

;; Copyright (C) 2008
;;   Free Software Foundation, Inc.

;; Author:     FSF (see below for full credits)
;; Maintainer: Eric S. Raymond <esr@thyrsus.com>
;; Keywords: tools

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to the
;; Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
;; Boston, MA 02110-1301, USA.

;;; Credits:

;; Designed and implemented by Eric S. Raymond, originally as part of VC mode.

;;; Commentary:

;; Goals:
;;
;; There is a class of front-ending problems that Emacs might be used
;; to address that involves selecting sets of files, or possibly
;; directories, and passing the selection set to slave commands.  The
;; prototypical example, from which this code is derived, is talking
;; to version-control systems. 
;;
;; vc-dispatcher.el is written to decouple the UI issues in such front
;; ends from their application-specific logic. It also provides a
;; service layer for running the slave commands either synchronously
;; or asynchronously and managing the message/error logs from the
;; command runs.
;;
;; Similar UI problems can be expected to come up in applications
;; areas other than VCSes; IDEs and document search are two obvious ones.
;; This mode is intended to ensure that the Emacs interfaces for all such
;; beasts are consistent and carefully designed.  But even if nothing
;; but VC ever uses it, getting the layer separation right will be
;; a valuable thing.

;; Dispatcher's universe:
;;
;; The universe consists of the file tree rooted at the current
;; directory. The dispatcher's upper layer deduces some subset 
;; of the file tree from the state of the currently visited buffer 
;; and returns that subset, presumably to a client mode.
;;
;; The user may be attempting to select one of three contexts: an
;; explicitly selected fileset, the current working directory, or a
;; global (null) context.  The user may be looking at either of two
;; different views; a buffer visiting a file, or a directory buffer
;; generated by vc-dispatcher.  The main UI problem connected with
;; this mode is that the user may need to be able to select any of
;; these three contexts from either view.
;;
;; The lower layer of this mode runs commands in subprocesses, either
;; synchronously or asynchronously.  Commands may be launched in one
;; of two ways: they may be run immediately, or the calling mode can
;; create a closure associated with a text-entry buffer, to be
;; executed when the user types C-c to ship the buffer contents. In
;; either case the command messages and error (if any) will remain
;; available in a status buffer.

(provide 'vc-dispatcher)

(eval-when-compile
  (require 'cl)
  (require 'dired)      ; for dired-map-over-marks macro
  (require 'dired-aux))	; for dired-kill-{line,tree}

;; General customization

(defcustom vc-logentry-check-hook nil
  "Normal hook run by `vc-finish-logentry'.
Use this to impose your own rules on the entry in addition to any the
dispatcher client mode imposes itself."
  :type 'hook
  :group 'vc)

(defcustom vc-delete-logbuf-window t
  "If non-nil, delete the *VC-log* buffer and window after each logical action.
If nil, bury that buffer instead.
This is most useful if you have multiple windows on a frame and would like to
preserve the setting."
  :type 'boolean
  :group 'vc)

(defcustom vc-command-messages nil
  "If non-nil, display run messages from back-end commands."
  :type 'boolean
  :group 'vc)

;; Variables the user doesn't need to know about.

(defvar vc-log-operation nil)
(defvar vc-log-after-operation-hook nil)
(defvar vc-log-fileset)
(defvar vc-log-extra)

;; In a log entry buffer, this is a local variable
;; that points to the buffer for which it was made
;; (either a file, or a VC dired buffer).
(defvar vc-parent-buffer nil)
(put 'vc-parent-buffer 'permanent-local t)
(defvar vc-parent-buffer-name nil)
(put 'vc-parent-buffer-name 'permanent-local t)

;; Common command execution logic

(defun vc-process-filter (p s)
  "An alternative output filter for async process P.
One difference with the default filter is that this inserts S after markers.
Another is that undo information is not kept."
  (let ((buffer (process-buffer p)))
    (when (buffer-live-p buffer)
      (with-current-buffer buffer
        (save-excursion
          (let ((buffer-undo-list t)
                (inhibit-read-only t))
            (goto-char (process-mark p))
            (insert s)
            (set-marker (process-mark p) (point))))))))

(defun vc-setup-buffer (buf)
  "Prepare BUF for executing a slave command and make it current."
  (let ((camefrom (current-buffer))
	(olddir default-directory))
    (set-buffer (get-buffer-create buf))
    (kill-all-local-variables)
    (set (make-local-variable 'vc-parent-buffer) camefrom)
    (set (make-local-variable 'vc-parent-buffer-name)
	 (concat " from " (buffer-name camefrom)))
    (setq default-directory olddir)
    (let ((buffer-undo-list t)
          (inhibit-read-only t))
      (erase-buffer))))

(defvar vc-sentinel-movepoint)          ;Dynamically scoped.

(defun vc-process-sentinel (p s)
  (let ((previous (process-get p 'vc-previous-sentinel))
        (buf (process-buffer p)))
    ;; Impatient users sometime kill "slow" buffers; check liveness
    ;; to avoid "error in process sentinel: Selecting deleted buffer".
    (when (buffer-live-p buf)
      (when previous (funcall previous p s))
      (with-current-buffer buf
        (setq mode-line-process
              (let ((status (process-status p)))
                ;; Leave mode-line uncluttered, normally.
                (unless (eq 'exit status)
                  (format " (%s)" status))))
        (let (vc-sentinel-movepoint)
          ;; Normally, we want async code such as sentinels to not move point.
          (save-excursion
            (goto-char (process-mark p))
            (let ((cmds (process-get p 'vc-sentinel-commands)))
              (process-put p 'vc-sentinel-commands nil)
              (dolist (cmd cmds)
                ;; Each sentinel may move point and the next one should be run
                ;; at that new point.  We could get the same result by having
                ;; each sentinel read&set process-mark, but since `cmd' needs
                ;; to work both for async and sync processes, this would be
                ;; difficult to achieve.
                (vc-exec-after cmd))))
          ;; But sometimes the sentinels really want to move point.
          (when vc-sentinel-movepoint
	    (let ((win (get-buffer-window (current-buffer) 0)))
	      (if (not win)
		  (goto-char vc-sentinel-movepoint)
		(with-selected-window win
		  (goto-char vc-sentinel-movepoint))))))))))

(defun vc-set-mode-line-busy-indicator ()
  (setq mode-line-process
	(concat " " (propertize "[waiting...]"
                                'face 'mode-line-emphasis
                                'help-echo
                                "A VC command is in progress in this buffer"))))

(defun vc-exec-after (code)
  "Eval CODE when the current buffer's process is done.
If the current buffer has no process, just evaluate CODE.
Else, add CODE to the process' sentinel."
  (let ((proc (get-buffer-process (current-buffer))))
    (cond
     ;; If there's no background process, just execute the code.
     ;; We used to explicitly call delete-process on exited processes,
     ;; but this led to timing problems causing process output to be
     ;; lost.  Terminated processes get deleted automatically
     ;; anyway. -- cyd
     ((or (null proc) (eq (process-status proc) 'exit))
      ;; Make sure we've read the process's output before going further.
      (when proc (accept-process-output proc))
      (eval code))
     ;; If a process is running, add CODE to the sentinel
     ((eq (process-status proc) 'run)
      (vc-set-mode-line-busy-indicator)
      (let ((previous (process-sentinel proc)))
        (unless (eq previous 'vc-process-sentinel)
          (process-put proc 'vc-previous-sentinel previous))
        (set-process-sentinel proc 'vc-process-sentinel))
      (process-put proc 'vc-sentinel-commands
                   ;; We keep the code fragments in the order given
                   ;; so that vc-diff-finish's message shows up in
                   ;; the presence of non-nil vc-command-messages.
                   (append (process-get proc 'vc-sentinel-commands)
                           (list code))))
     (t (error "Unexpected process state"))))
  nil)

(defvar vc-post-command-functions nil
  "Hook run at the end of `vc-do-command'.
Each function is called inside the buffer in which the command was run
and is passed 3 arguments: the COMMAND, the FILES and the FLAGS.")

(defvar w32-quote-process-args)

(defun vc-delistify (filelist)
  "Smash a FILELIST into a file list string suitable for info messages."
  ;; FIXME what about file names with spaces?
  (if (not filelist) "."  (mapconcat 'identity filelist " ")))

;;;###autoload
(defun vc-do-command (buffer okstatus command file-or-list &rest flags)
  "Execute a VC command, notifying user and checking for errors.
Output from COMMAND goes to BUFFER, or *vc* if BUFFER is nil or the
current buffer if BUFFER is t.  If the destination buffer is not
already current, set it up properly and erase it.  The command is
considered successful if its exit status does not exceed OKSTATUS (if
OKSTATUS is nil, that means to ignore error status, if it is `async', that
means not to wait for termination of the subprocess; if it is t it means to
ignore all execution errors).  FILE-OR-LIST is the name of a working file;
it may be a list of files or be nil (to execute commands that don't expect
a file name or set of files).  If an optional list of FLAGS is present,
that is inserted into the command line before the filename."
  ;; FIXME: file-relative-name can return a bogus result because
  ;; it doesn't look at the actual file-system to see if symlinks
  ;; come into play.
  (let* ((files
	  (mapcar (lambda (f) (file-relative-name (expand-file-name f)))
		  (if (listp file-or-list) file-or-list (list file-or-list))))
	 (full-command
	  ;; What we're doing here is preparing a version of the command
	  ;; for display in a debug-progess message.  If it's fewer than
	  ;; 20 characters display the entire command (without trailing
	  ;; newline).  Otherwise display the first 20 followed by an ellipsis.
	  (concat (if (string= (substring command -1) "\n")
		      (substring command 0 -1)
		    command)
		  " "
		  (vc-delistify (mapcar (lambda (s) (if (> (length s) 20) (concat (substring s 0 2) "...")  s)) flags))
		  " " (vc-delistify files))))
    (save-current-buffer
      (unless (or (eq buffer t)
		  (and (stringp buffer)
		       (string= (buffer-name) buffer))
		  (eq buffer (current-buffer)))
	(vc-setup-buffer (or buffer "*vc*")))
      ;; If there's some previous async process still running, just kill it.
      (let ((oldproc (get-buffer-process (current-buffer))))
        ;; If we wanted to wait for oldproc to finish before doing
        ;; something, we'd have used vc-eval-after.
        ;; Use `delete-process' rather than `kill-process' because we don't
        ;; want any of its output to appear from now on.
        (if oldproc (delete-process oldproc)))
      (let ((squeezed (remq nil flags))
	    (inhibit-read-only t)
	    (status 0))
	(when files
	  (setq squeezed (nconc squeezed files)))
	(let ((exec-path (append vc-path exec-path))
	      ;; Add vc-path to PATH for the execution of this command.
	      (process-environment
	       (cons (concat "PATH=" (getenv "PATH")
			     path-separator
			     (mapconcat 'identity vc-path path-separator))
		     process-environment))
	      (w32-quote-process-args t))
	  (when (and (eq okstatus 'async) (file-remote-p default-directory))
	    ;; start-process does not support remote execution
	    (setq okstatus nil))
	  (if (eq okstatus 'async)
	      ;; Run asynchronously.
	      (let ((proc
		     (let ((process-connection-type nil))
		       (apply 'start-file-process command (current-buffer)
                              command squeezed))))
		(if vc-command-messages
		    (message "Running %s in background..." full-command))
		;;(set-process-sentinel proc (lambda (p msg) (delete-process p)))
		(set-process-filter proc 'vc-process-filter)
		(vc-exec-after
		 `(if vc-command-messages
		      (message "Running %s in background... done" ',full-command))))
	    ;; Run synchrously
	    (when vc-command-messages
	      (message "Running %s in foreground..." full-command))
	    (let ((buffer-undo-list t))
	      (setq status (apply 'process-file command nil t nil squeezed)))
	    (when (and (not (eq t okstatus))
		       (or (not (integerp status))
			   (and okstatus (< okstatus status))))
              (unless (eq ?\s (aref (buffer-name (current-buffer)) 0))
                (pop-to-buffer (current-buffer))
                (goto-char (point-min))
                (shrink-window-if-larger-than-buffer))
	      (error "Running %s...FAILED (%s)" full-command
		     (if (integerp status) (format "status %d" status) status))))
	  ;; We're done.  But don't emit a status message if running
	  ;; asychronously, it would just mislead.
	  (if (and vc-command-messages (not (eq okstatus 'async)))
	      (message "Running %s...OK = %d" full-command status)))
	(vc-exec-after
	 `(run-hook-with-args 'vc-post-command-functions
			      ',command ',file-or-list ',flags))
	status))))

;; These functions are used to ensure that the view the user sees is up to date
;; even if the dispatcher client mode has messed with file contents (as in, 
;; for example, VCS keyword expansion).

(declare-function view-mode-exit "view" (&optional return-to-alist exit-action all-win))

(defun vc-position-context (posn)
  "Save a bit of the text around POSN in the current buffer.
Used to help us find the corresponding position again later
if markers are destroyed or corrupted."
  ;; A lot of this was shamelessly lifted from Sebastian Kremer's
  ;; rcs.el mode.
  (list posn
	(buffer-size)
	(buffer-substring posn
			  (min (point-max) (+ posn 100)))))

(defun vc-find-position-by-context (context)
  "Return the position of CONTEXT in the current buffer.
If CONTEXT cannot be found, return nil."
  (let ((context-string (nth 2 context)))
    (if (equal "" context-string)
	(point-max)
      (save-excursion
	(let ((diff (- (nth 1 context) (buffer-size))))
	  (when (< diff 0) (setq diff (- diff)))
	  (goto-char (nth 0 context))
	  (if (or (search-forward context-string nil t)
		  ;; Can't use search-backward since the match may continue
		  ;; after point.
		  (progn (goto-char (- (point) diff (length context-string)))
			 ;; goto-char doesn't signal an error at
			 ;; beginning of buffer like backward-char would
			 (search-forward context-string nil t)))
	      ;; to beginning of OSTRING
	      (- (point) (length context-string))))))))

(defun vc-context-matches-p (posn context)
  "Return t if POSN matches CONTEXT, nil otherwise."
  (let* ((context-string (nth 2 context))
	 (len (length context-string))
	 (end (+ posn len)))
    (if (> end (1+ (buffer-size)))
	nil
      (string= context-string (buffer-substring posn end)))))

(defun vc-buffer-context ()
  "Return a list (POINT-CONTEXT MARK-CONTEXT REPARSE).
Used by `vc-restore-buffer-context' to later restore the context."
  (let ((point-context (vc-position-context (point)))
	;; Use mark-marker to avoid confusion in transient-mark-mode.
	(mark-context  (when (eq (marker-buffer (mark-marker)) (current-buffer))
			 (vc-position-context (mark-marker))))
	;; Make the right thing happen in transient-mark-mode.
	(mark-active nil)
	;; The new compilation code does not use compilation-error-list any
	;; more, so the code below is now ineffective and might as well
	;; be disabled.  -- Stef
	;; ;; We may want to reparse the compilation buffer after revert
	;; (reparse (and (boundp 'compilation-error-list) ;compile loaded
	;; 	      ;; Construct a list; each elt is nil or a buffer
	;; 	      ;; if that buffer is a compilation output buffer
	;; 	      ;; that contains markers into the current buffer.
	;; 	      (save-current-buffer
	;; 		(mapcar (lambda (buffer)
	;; 			  (set-buffer buffer)
	;; 			  (let ((errors (or
	;; 					 compilation-old-error-list
	;; 					 compilation-error-list))
	;; 				(buffer-error-marked-p nil))
	;; 			    (while (and (consp errors)
	;; 					(not buffer-error-marked-p))
	;; 			      (and (markerp (cdr (car errors)))
	;; 				   (eq buffer
	;; 				       (marker-buffer
	;; 					(cdr (car errors))))
	;; 				   (setq buffer-error-marked-p t))
	;; 			      (setq errors (cdr errors)))
	;; 			    (if buffer-error-marked-p buffer)))
	;; 			(buffer-list)))))
	(reparse nil))
    (list point-context mark-context reparse)))

(defun vc-restore-buffer-context (context)
  "Restore point/mark, and reparse any affected compilation buffers.
CONTEXT is that which `vc-buffer-context' returns."
  (let ((point-context (nth 0 context))
	(mark-context (nth 1 context))
	;; (reparse (nth 2 context))
        )
    ;; The new compilation code does not use compilation-error-list any
    ;; more, so the code below is now ineffective and might as well
    ;; be disabled.  -- Stef
    ;; ;; Reparse affected compilation buffers.
    ;; (while reparse
    ;;   (if (car reparse)
    ;; 	  (with-current-buffer (car reparse)
    ;; 	    (let ((compilation-last-buffer (current-buffer)) ;select buffer
    ;; 		  ;; Record the position in the compilation buffer of
    ;; 		  ;; the last error next-error went to.
    ;; 		  (error-pos (marker-position
    ;; 			      (car (car-safe compilation-error-list)))))
    ;; 	      ;; Reparse the error messages as far as they were parsed before.
    ;; 	      (compile-reinitialize-errors '(4) compilation-parsing-end)
    ;; 	      ;; Move the pointer up to find the error we were at before
    ;; 	      ;; reparsing.  Now next-error should properly go to the next one.
    ;; 	      (while (and compilation-error-list
    ;; 			  (/= error-pos (car (car compilation-error-list))))
    ;; 		(setq compilation-error-list (cdr compilation-error-list))))))
    ;;   (setq reparse (cdr reparse)))

    ;; if necessary, restore point and mark
    (if (not (vc-context-matches-p (point) point-context))
	(let ((new-point (vc-find-position-by-context point-context)))
	  (when new-point (goto-char new-point))))
    (and mark-active
         mark-context
         (not (vc-context-matches-p (mark) mark-context))
         (let ((new-mark (vc-find-position-by-context mark-context)))
           (when new-mark (set-mark new-mark))))))

(defun vc-revert-buffer-internal (&optional arg no-confirm)
  "Revert buffer, keeping point and mark where user expects them.
Try to be clever in the face of changes due to expanded version-control
key words.  This is important for typeahead to work as expected.
ARG and NO-CONFIRM are passed on to `revert-buffer'."
  (interactive "P")
  (widen)
  (let ((context (vc-buffer-context)))
    ;; Use save-excursion here, because it may be able to restore point
    ;; and mark properly even in cases where vc-restore-buffer-context
    ;; would fail.  However, save-excursion might also get it wrong --
    ;; in this case, vc-restore-buffer-context gives it a second try.
    (save-excursion
      ;; t means don't call normal-mode;
      ;; that's to preserve various minor modes.
      (revert-buffer arg no-confirm t))
    (vc-restore-buffer-context context)))

(defun vc-resynch-window (file &optional keep noquery)
  "If FILE is in the current buffer, either revert or unvisit it.
The choice between revert (to see expanded keywords) and unvisit
depends on KEEP.  NOQUERY if non-nil inhibits confirmation for
reverting.  NOQUERY should be t *only* if it is known the only
difference between the buffer and the file is due to
modifications by the dispatcher client code, rather than user
editing!"
  (and (string= buffer-file-name file)
       (if keep
	   (progn
	     (vc-revert-buffer-internal t noquery)
             ;; TODO: Adjusting view mode might no longer be necessary
             ;; after RMS change to files.el of 1999-08-08.  Investigate
             ;; this when we install the new VC.
             (and view-read-only
                  (if (file-writable-p file)
                      (and view-mode
                           (let ((view-old-buffer-read-only nil))
                             (view-mode-exit)))
                    (and (not view-mode)
                         (not (eq (get major-mode 'mode-class) 'special))
                         (view-mode-enter))))
	     ;; FIXME: Call into vc.el
	     (vc-mode-line buffer-file-name))
	 (kill-buffer (current-buffer)))))

(defun vc-resynch-buffer (file &optional keep noquery)
  "If FILE is currently visited, resynch its buffer."
  (if (string= buffer-file-name file)
      (vc-resynch-window file keep noquery)
    (let ((buffer (get-file-buffer file)))
      (when buffer
	(with-current-buffer buffer
	  (vc-resynch-window file keep noquery)))))
  ;; FIME: Call into vc.el
  (vc-directory-resynch-file file)
  (when (memq 'vc-dir-mark-buffer-changed after-save-hook)
    (let ((buffer (get-file-buffer file)))
      ;; FIME: Call into vc.el
      (vc-dir-mark-buffer-changed file))))

;; Command closures

(defun vc-start-logentry (files extra comment initial-contents msg action &optional after-hook)
  "Accept a comment for an operation on FILES with extra data EXTRA.
If COMMENT is nil, pop up a VC-log buffer, emit MSG, and set the
action on close to ACTION.  If COMMENT is a string and
INITIAL-CONTENTS is non-nil, then COMMENT is used as the initial
contents of the log entry buffer.  If COMMENT is a string and
INITIAL-CONTENTS is nil, do action immediately as if the user had
entered COMMENT.  If COMMENT is t, also do action immediately with an
empty comment.  Remember the file's buffer in `vc-parent-buffer'
\(current one if no file).  AFTER-HOOK specifies the local value
for `vc-log-after-operation-hook'."
  (let ((parent
         (if (or (eq major-mode 'vc-dired-mode) (eq major-mode 'vc-dir-mode))
             ;; If we are called from VC dired, the parent buffer is
             ;; the current buffer.
             (current-buffer)
           (if (and files (equal (length files) 1))
               (get-file-buffer (car files))
             (current-buffer)))))
    (if (and comment (not initial-contents))
	(set-buffer (get-buffer-create "*VC-log*"))
      (pop-to-buffer (get-buffer-create "*VC-log*")))
    (set (make-local-variable 'vc-parent-buffer) parent)
    (set (make-local-variable 'vc-parent-buffer-name)
	 (concat " from " (buffer-name vc-parent-buffer)))
    (vc-log-edit files)
    (make-local-variable 'vc-log-after-operation-hook)
    (when after-hook
      (setq vc-log-after-operation-hook after-hook))
    (setq vc-log-operation action)
    (setq vc-log-extra extra)
    (when comment
      (erase-buffer)
      (when (stringp comment) (insert comment)))
    (if (or (not comment) initial-contents)
	(message "%s  Type C-c C-c when done" msg)
      (vc-finish-logentry (eq comment t)))))

(defun vc-finish-logentry (&optional nocomment)
  "Complete the operation implied by the current log entry.
Use the contents of the current buffer as a check-in or registration
comment.  If the optional arg NOCOMMENT is non-nil, then don't check
the buffer contents as a comment."
  (interactive)
  ;; Check and record the comment, if any.
  (unless nocomment
    (run-hooks 'vc-logentry-check-hook))
  ;; Sync parent buffer in case the user modified it while editing the comment.
  ;; But not if it is a vc-dired buffer.
  (with-current-buffer vc-parent-buffer
    (or vc-dired-mode (eq major-mode 'vc-dir-mode) (vc-buffer-sync)))
  (unless vc-log-operation
    (error "No log operation is pending"))
  ;; save the parameters held in buffer-local variables
  (let ((log-operation vc-log-operation)
	(log-fileset vc-log-fileset)
	(log-extra vc-log-extra)
	(log-entry (buffer-string))
	(after-hook vc-log-after-operation-hook)
	(tmp-vc-parent-buffer vc-parent-buffer))
    (pop-to-buffer vc-parent-buffer)
    ;; OK, do it to it
    (save-excursion
      (funcall log-operation
	       log-fileset
	       log-extra
	       log-entry))
    ;; Remove checkin window (after the checkin so that if that fails
    ;; we don't zap the *VC-log* buffer and the typing therein).
    ;; -- IMO this should be replaced with quit-window
    (let ((logbuf (get-buffer "*VC-log*")))
      (cond ((and logbuf vc-delete-logbuf-window)
	     (delete-windows-on logbuf (selected-frame))
	     ;; Kill buffer and delete any other dedicated windows/frames.
	     (kill-buffer logbuf))
	    (logbuf (pop-to-buffer "*VC-log*")
		    (bury-buffer)
		    (pop-to-buffer tmp-vc-parent-buffer))))
    ;; Now make sure we see the expanded headers
    (when log-fileset
      (mapc
       (lambda (file) (vc-resynch-buffer file vc-keep-workfiles t))
       log-fileset))
    (when vc-dired-mode
      (dired-move-to-filename))
    (when (eq major-mode 'vc-dir-mode)
      (vc-dir-move-to-goal-column))
    (run-hooks after-hook 'vc-finish-logentry-hook)))

;; VC-Dired mode (to be removed when vc-dir support is finished)

(defcustom vc-dired-listing-switches "-al"
  "Switches passed to `ls' for vc-dired.  MUST contain the `l' option."
  :type 'string
  :group 'vc
  :version "21.1")

(defcustom vc-dired-recurse t
  "If non-nil, show directory trees recursively in VC Dired."
  :type 'boolean
  :group 'vc
  :version "20.3")

(defcustom vc-dired-terse-display t
  "If non-nil, show only locked or locally modified files in VC Dired."
  :type 'boolean
  :group 'vc
  :version "20.3")

(defvar vc-dired-mode nil)
(defvar vc-dired-window-configuration)

(make-variable-buffer-local 'vc-dired-mode)

;; The VC directory major mode.  Coopt Dired for this.
;; All VC commands get mapped into logical equivalents.

(defvar vc-dired-switches)
(defvar vc-dired-terse-mode)

(defvar vc-dired-mode-map
  (let ((map (make-sparse-keymap))
	(vmap (make-sparse-keymap)))
    (define-key map "\C-xv" vmap)
    (define-key map "v" vmap)
    (set-keymap-parent vmap vc-prefix-map)
    (define-key vmap "t" 'vc-dired-toggle-terse-mode)
    map))

(define-derived-mode vc-dired-mode dired-mode "Dired under VC"
  "The major mode used in VC directory buffers.

It works like Dired, but lists only files under version control, with
the current VC state of each file being indicated in the place of the
file's link count, owner, group and size.  Subdirectories are also
listed, and you may insert them into the buffer as desired, like in
Dired.

All Dired commands operate normally, with the exception of `v', which
is redefined as the version control prefix, so that you can type
`vl', `v=' etc. to invoke `vc-print-log', `vc-diff', and the like on
the file named in the current Dired buffer line.  `vv' invokes
`vc-next-action' on this file, or on all files currently marked.
There is a special command, `*l', to mark all files currently locked."
  ;; define-derived-mode does it for us in Emacs-21, but not in Emacs-20.
  ;; We do it here because dired might not be loaded yet
  ;; when vc-dired-mode-map is initialized.
  (set-keymap-parent vc-dired-mode-map dired-mode-map)
  (add-hook 'dired-after-readin-hook 'vc-dired-hook nil t)
  ;; The following is slightly modified from files.el,
  ;; because file lines look a bit different in vc-dired-mode
  ;; (the column before the date does not end in a digit).
  ;; albinus: It should be done in the original declaration.  Problem
  ;; is the optional empty state-info; otherwise ")" would be good
  ;; enough as delimeter.
  (set (make-local-variable 'directory-listing-before-filename-regexp)
  (let* ((l "\\([A-Za-z]\\|[^\0-\177]\\)")
         ;; In some locales, month abbreviations are as short as 2 letters,
         ;; and they can be followed by ".".
         (month (concat l l "+\\.?"))
         (s " ")
         (yyyy "[0-9][0-9][0-9][0-9]")
         (dd "[ 0-3][0-9]")
         (HH:MM "[ 0-2][0-9]:[0-5][0-9]")
         (seconds "[0-6][0-9]\\([.,][0-9]+\\)?")
         (zone "[-+][0-2][0-9][0-5][0-9]")
         (iso-mm-dd "[01][0-9]-[0-3][0-9]")
         (iso-time (concat HH:MM "\\(:" seconds "\\( ?" zone "\\)?\\)?"))
         (iso (concat "\\(\\(" yyyy "-\\)?" iso-mm-dd "[ T]" iso-time
                      "\\|" yyyy "-" iso-mm-dd "\\)"))
         (western (concat "\\(" month s "+" dd "\\|" dd "\\.?" s month "\\)"
                          s "+"
                          "\\(" HH:MM "\\|" yyyy "\\)"))
         (western-comma (concat month s "+" dd "," s "+" yyyy))
         ;; Japanese MS-Windows ls-lisp has one-digit months, and
         ;; omits the Kanji characters after month and day-of-month.
         (mm "[ 0-1]?[0-9]")
         (japanese
          (concat mm l "?" s dd l "?" s "+"
                  "\\(" HH:MM "\\|" yyyy l "?" "\\)")))
    ;; the .* below ensures that we find the last match on a line
    (concat ".*" s
            "\\(" western "\\|" western-comma "\\|" japanese "\\|" iso "\\)"
            s "+")))
  (and (boundp 'vc-dired-switches)
       vc-dired-switches
       (set (make-local-variable 'dired-actual-switches)
            vc-dired-switches))
  (set (make-local-variable 'vc-dired-terse-mode) vc-dired-terse-display)
  ;;(let ((backend-name (symbol-name (vc-responsible-backend
  ;;			    default-directory))))
  ;;  (setq mode-name (concat mode-name backend-name))
  ;;  ;; Add menu after `vc-dired-mode-map' has `dired-mode-map' as the parent.
  ;;  (let ((vc-dire-menu-map (copy-keymap vc-menu-map)))
  ;;    (define-key-after (lookup-key vc-dired-mode-map [menu-bar]) [vc]
  ;;	(cons backend-name vc-dire-menu-map) 'subdir)))
  (setq vc-dired-mode t))

(defun vc-dired-toggle-terse-mode ()
  "Toggle terse display in VC Dired."
  (interactive)
  (if (not vc-dired-mode)
      nil
    (setq vc-dired-terse-mode (not vc-dired-terse-mode))
    (if vc-dired-terse-mode
        (vc-dired-hook)
      (revert-buffer))))

(defun vc-dired-mark-locked ()
  "Mark all files currently locked."
  (interactive)
  (dired-mark-if (let ((f (dired-get-filename nil t)))
		   (and f
			(not (file-directory-p f))
			(not (vc-up-to-date-p f))))
		 "locked file"))

(define-key vc-dired-mode-map "*l" 'vc-dired-mark-locked)

(defun vc-dired-reformat-line (vc-info)
  "Reformat a directory-listing line.
Replace various columns with version control information, VC-INFO.
This code, like dired, assumes UNIX -l format."
  (beginning-of-line)
  (when (re-search-forward
         ;; Match link count, owner, group, size.  Group may be missing,
         ;; and only the size is present in OS/2 -l format.
         "^..[drwxlts-]+ \\( *[0-9]+\\( [^ ]+ +\\([^ ]+ +\\)?[0-9]+\\)?\\) "
         (line-end-position) t)
      (replace-match (substring (concat vc-info "          ") 0 10)
                     t t nil 1)))

(defun vc-dired-ignorable-p (filename)
  "Should FILENAME be ignored in VC-Dired listings?"
  (catch t
    ;; Ignore anything that wouldn't be found by completion (.o, .la, etc.)
    (dolist (ignorable completion-ignored-extensions)
      (let ((ext (substring filename
			      (- (length filename)
				 (length ignorable)))))
	(if (string= ignorable ext) (throw t t))))
    ;; Ignore Makefiles derived from something else
    (when (string= (file-name-nondirectory filename) "Makefile")
      (let* ((dir (file-name-directory filename))
	    (peers (directory-files (or dir default-directory))))
	(if (or (member "Makefile.in" peers) (member "Makefile.am" peers))
	   (throw t t))))
    nil))

(defun vc-dired-purge ()
  "Remove empty subdirs."
  (goto-char (point-min))
  (while (dired-get-subdir)
    (forward-line 2)
    (if (dired-get-filename nil t)
	(if (not (dired-next-subdir 1 t))
	    (goto-char (point-max)))
      (forward-line -2)
      (if (not (string= (dired-current-directory) default-directory))
	  (dired-do-kill-lines t "")
	;; We cannot remove the top level directory.
	;; Just make it look a little nicer.
	(forward-line 1)
	(or (eobp) (kill-line))
	(if (not (dired-next-subdir 1 t))
	    (goto-char (point-max))))))
  (goto-char (point-min)))

(defun vc-dired-buffers-for-dir (dir)
  "Return a list of all vc-dired buffers that currently display DIR."
  (let (result)
    ;; Check whether dired is loaded.
    (when (fboundp 'dired-buffers-for-dir)
      (dolist (buffer (dired-buffers-for-dir dir))
        (with-current-buffer buffer
          (when vc-dired-mode
	    (push buffer result)))))
    (nreverse result)))

(defun vc-directory-resynch-file (file)
  "Update the entries for FILE in any VC Dired buffers that list it."
  ;;FIXME This needs to be implemented so it works for vc-dir
  (let ((buffers (vc-dired-buffers-for-dir (file-name-directory file))))
    (when buffers
      (mapcar (lambda (buffer)
		(with-current-buffer buffer
		  (when (dired-goto-file file)
		    ;; bind vc-dired-terse-mode to nil so that
		    ;; files won't vanish when they are checked in
		    (let ((vc-dired-terse-mode nil))
		      (dired-do-redisplay 1)))))
	      buffers))))

;;;###autoload
(defun vc-directory (dir read-switches)
  "Create a buffer in VC Dired Mode for directory DIR.

See Info node `VC Dired Mode'.

With prefix arg READ-SWITCHES, specify a value to override
`dired-listing-switches' when generating the listing."
  (interactive "DDired under VC (directory): \nP")
  (let ((vc-dired-switches (concat vc-dired-listing-switches
                                   (if vc-dired-recurse "R" ""))))
    (if read-switches
        (setq vc-dired-switches
              (read-string "Dired listing switches: "
                           vc-dired-switches)))
    (require 'dired)
    (require 'dired-aux)
    (switch-to-buffer
     (dired-internal-noselect (expand-file-name (file-name-as-directory dir))
                              vc-dired-switches
                              'vc-dired-mode))))

;;; vc-dispatcher.el ends here