; Fix spelling; be consistent with "key binding" (Bug#52674)

doc/emacs/text.texi

@@ -474,8 +474,8 @@ insert a curved quote even when Electric Quote is disabled or
 inactive, you can type @kbd{C-x 8 [} for @t{‘}, @kbd{C-x 8 ]} for
 @t{’}, @kbd{C-x 8 @{} for @t{“}, and @kbd{C-x 8 @}} for @t{”}.
 @xref{Inserting Text}.  Note that the value of
-@code{electric-quote-chars} does not affect these keybindings, they
-are not keybindings of @code{electric-quote-mode} but bound in
+@code{electric-quote-chars} does not affect these key bindings, they
+are not key bindings of @code{electric-quote-mode} but bound in
 @code{global-map}.
 
 @node Filling

doc/emacs/windows.texi

@@ -605,7 +605,7 @@ selects the window immediately to the right of the currently selected
 one, and similarly for the left, up, and down counterparts.
 @code{windmove-default-keybindings} binds these commands to
 @kbd{S-right} etc.; doing so disables shift selection for those keys
-(@pxref{Shift Selection}).  In the same way as keybindings can be
+(@pxref{Shift Selection}).  In the same way as key bindings can be
 defined for commands that select windows directionally, you can use
 @code{windmove-display-default-keybindings} to define keybindings for
 commands that specify in what direction to display the window for the
@@ -613,7 +613,7 @@ buffer that the next command is going to display.  Also there is
 @code{windmove-delete-default-keybindings} to define keybindings for
 commands that delete windows directionally, and
 @code{windmove-swap-states-default-keybindings} that defines
-keybindings for commands that swap the window contents of the selected
+key bindings for commands that swap the window contents of the selected
 window with the window in the specified direction.
 
   The command @kbd{M-x compare-windows} lets you compare the text

doc/lispintro/emacs-lisp-intro.texi

@@ -688,7 +688,7 @@ Your @file{.emacs} File
 * Text and Auto-fill::          Automatically wrap lines.
 * Mail Aliases::                Use abbreviations for email addresses.
 * Indent Tabs Mode::            Don't use tabs with @TeX{}
-* Keybindings::                 Create some personal keybindings.
+* Key Bindings::                Create some personal key bindings.
 * Keymaps::                     More about key binding.
 * Loading Files::               Load (i.e., evaluate) files automatically.
 * Autoload::                    Make functions available.
@@ -3358,7 +3358,7 @@ Both the examples just mentioned work identically to move point forward
 three sentences.  (Since @code{multiply-by-seven} is not bound to a key,
 it could not be used as an example of key binding.)
 
-(@xref{Keybindings, , Some Keybindings}, to learn how to bind a command
+(@xref{Key Bindings, , Some Key Bindings}, to learn how to bind a command
 to a key.)
 
 A @dfn{prefix argument} is passed to an interactive function by typing the
@@ -13662,7 +13662,7 @@ syntax table determines which characters these are."
 @end ifinfo
 
 @need 1000
-If you wish, you can also install this keybinding by evaluating it:
+If you wish, you can also install this key binding by evaluating it:
 
 @smallexample
 (global-set-key "\C-c=" '@value{COUNT-WORDS})
@@ -14614,7 +14614,7 @@ almost the same code as for the recursive version of
 
 @need 800
 @noindent
-Let's re-use @kbd{C-c =} as a convenient keybinding:
+Let's re-use @kbd{C-c =} as a convenient key binding:
 
 @smallexample
 (global-set-key "\C-c=" 'count-words-defun)
@@ -14622,7 +14622,7 @@ Let's re-use @kbd{C-c =} as a convenient keybinding:
 
 Now we can try out @code{count-words-defun}: install both
 @code{count-words-in-defun} and @code{count-words-defun}, and set the
-keybinding.  Then copy the following to an Emacs Lisp buffer (like,
+key binding.  Then copy the following to an Emacs Lisp buffer (like,
 for instance, @file{*scratch*}), place the cursor within the
 definition, and use the @kbd{C-c =} command.
 
@@ -15964,7 +15964,7 @@ placing point somewhere in the buffer, typing @kbd{M-:}, typing the
 and then typing @key{RET}.  This causes Emacs to evaluate the
 expression in the minibuffer, but to use as the value of point the
 position of point in the @file{*scratch*} buffer.  (@kbd{M-:}  is the
-keybinding for @code{eval-expression}. Also, @code{nil} does not
+key binding for @code{eval-expression}. Also, @code{nil} does not
 appear in the @file{*scratch*} buffer since the expression is
 evaluated in the minibuffer.)
 
@@ -16531,7 +16531,7 @@ expressions in Emacs Lisp you can change or extend Emacs.
 * Text and Auto-fill::          Automatically wrap lines.
 * Mail Aliases::                Use abbreviations for email addresses.
 * Indent Tabs Mode::            Don't use tabs with @TeX{}
-* Keybindings::                 Create some personal keybindings.
+* Key Bindings::                Create some personal key bindings.
 * Keymaps::                     More about key binding.
 * Loading Files::               Load (i.e., evaluate) files automatically.
 * Autoload::                    Make functions available.
@@ -17075,10 +17075,10 @@ Files'' in @cite{The GNU Emacs Manual}.
 @end iftex
 
 @need 1700
-@node Keybindings
-@section Some Keybindings
+@node Key Bindings
+@section Some Key Bindings
 
-Now for some personal keybindings:
+Now for some personal key bindings:
 
 @smallexample
 @group
@@ -17100,10 +17100,10 @@ This also shows how to set a key globally, for all modes.
 @cindex Key setting globally
 @findex global-set-key
 The command is @code{global-set-key}.  It is followed by the
-keybinding.  In a @file{.emacs} file, the keybinding is written as
+key binding.  In a @file{.emacs} file, the keybinding is written as
 shown: @code{\C-c} stands for Control-C, which means to press the
 control key and the @kbd{c} key at the same time.  The @code{w} means
-to press the @kbd{w} key.  The keybinding is surrounded by double
+to press the @kbd{w} key.  The key binding is surrounded by double
 quotation marks.  In documentation, you would write this as
 @w{@kbd{C-c w}}.  (If you were binding a @key{META} key, such as
 @kbd{M-c}, rather than a @key{CTRL} key, you would write
@@ -17117,26 +17117,26 @@ would first try to evaluate the symbol to determine its value.
 
 These three things, the double quotation marks, the backslash before
 the @samp{C}, and the single-quote are necessary parts of
-keybinding that I tend to forget.  Fortunately, I have come to
+key binding that I tend to forget.  Fortunately, I have come to
 remember that I should look at my existing @file{.emacs} file, and
 adapt what is there.
 
-As for the keybinding itself: @kbd{C-c w}.  This combines the prefix
+As for the key binding itself: @kbd{C-c w}.  This combines the prefix
 key, @kbd{C-c}, with a single character, in this case, @kbd{w}.  This
 set of keys, @kbd{C-c} followed by a single character, is strictly
 reserved for individuals' own use.  (I call these @dfn{own} keys, since
 these are for my own use.)  You should always be able to create such a
-keybinding for your own use without stomping on someone else's
-keybinding.  If you ever write an extension to Emacs, please avoid
+key binding for your own use without stomping on someone else's
+key binding.  If you ever write an extension to Emacs, please avoid
 taking any of these keys for public use.  Create a key like @kbd{C-c
 C-w} instead.  Otherwise, we will run out of own keys.
 
 @need 1250
-Here is another keybinding, with a comment:
+Here is another key binding, with a comment:
 
 @smallexample
 @group
-;;; Keybinding for 'occur'
+;;; Key binding for 'occur'
 ; I use occur a lot, so let's bind it to a key:
 (global-set-key "\C-co" 'occur)
 @end group
@@ -17196,8 +17196,8 @@ but moves point into that window.
 @cindex Rebinding keys
 
 Emacs uses @dfn{keymaps} to record which keys call which commands.
-When you use @code{global-set-key} to set the keybinding for a single
-command in all parts of Emacs, you are specifying the keybinding in
+When you use @code{global-set-key} to set the key binding for a single
+command in all parts of Emacs, you are specifying the key binding in
 @code{current-global-map}.
 
 Specific modes, such as C mode or Text mode, have their own keymaps;
@@ -17452,7 +17452,7 @@ Here is the definition:
 @end smallexample
 
 @need 1250
-Now for the keybinding.
+Now for the key binding.
 
 Function keys as well as mouse button events and non-@sc{ascii}
 characters are written within square brackets, without quotation
@@ -17757,7 +17757,7 @@ Some systems bind keys unpleasantly.  Sometimes, for example, the
 @key{CTRL} key appears in an awkward spot rather than at the far left
 of the home row.
 
-Usually, when people fix these sorts of keybindings, they do not
+Usually, when people fix these sorts of key bindings, they do not
 change their @file{~/.emacs} file.  Instead, they bind the proper keys
 on their consoles with the @code{loadkeys} or @code{install-keymap}
 commands in their boot script and then include @code{xmodmap} commands

doc/lispref/keymaps.texi

@@ -706,7 +706,7 @@ active keymaps, except for the global keymap.  Secondly, the
 terminal-local variable @code{overriding-terminal-local-map} specifies
 a keymap that takes precedence over @emph{all} other keymaps
 (including @code{overriding-local-map}); this is normally used for
-modal/transient keybindings (the function @code{set-transient-map}
+modal/transient key bindings (the function @code{set-transient-map}
 provides a convenient interface for this).  @xref{Controlling Active
 Maps}, for details.
 
@@ -1969,7 +1969,7 @@ redefines @kbd{C-x C-\} to move down a line.
 redefines the first (leftmost) mouse button, entered with the Meta key, to
 set point where you click.
 
-@cindex non-@acronym{ASCII} text in keybindings
+@cindex non-@acronym{ASCII} text in key bindings
   Be careful when using non-@acronym{ASCII} text characters in Lisp
 specifications of keys to bind.  If these are read as multibyte text, as
 they usually will be in a Lisp file (@pxref{Loading Non-ASCII}), you

doc/lispref/loading.texi

@@ -482,7 +482,7 @@ automatically.  However, if this does make a difference, you can force
 a particular Lisp file to be interpreted as unibyte by writing
 @samp{coding: raw-text} in a local variables section.  With
 that designator, the file will unconditionally be interpreted as
-unibyte.  This can matter when making keybindings to
+unibyte.  This can matter when making key bindings to
 non-@acronym{ASCII} characters written as @code{?v@var{literal}}.
 
 @node Autoload

doc/lispref/searching.texi

@@ -2854,7 +2854,7 @@ Display some help, then ask again.
 
 @defvar multi-query-replace-map
 This variable holds a keymap that extends @code{query-replace-map} by
-providing additional keybindings that are useful in multi-buffer
+providing additional key bindings that are useful in multi-buffer
 replacements.  The additional bindings are:
 
 @table @code

doc/misc/ede.texi

@@ -99,7 +99,7 @@ learn and adopt GNU ways of doing things.
 @chapter @ede{} Project Concepts
 
 @ede{} is a generic interface for managing projects.  It specifies a
-single set of menus and keybindings, while supporting multiple ways to
+single set of menus and key bindings, while supporting multiple ways to
 express a project via a build system.
 
 In the subsequent chapters, we will describe the different project
@@ -144,7 +144,7 @@ init file:
 
 Activating @ede{} adds a menu named @samp{Development} to the menu
 bar.  This menu provides several menu items for high-level @ede{}
-commands.  These menu items, and their corresponding keybindings, are
+commands.  These menu items, and their corresponding key bindings, are
 independent of the type of project you are actually working on.
 
 @node Quick Start
@@ -271,7 +271,7 @@ Projects.  You can create targets either from a buffer, or from a
 @code{dired} directory buffer.
 
 Note: If for some reason a directory list buffer, or file does not have the
-@samp{Project} menu item, or if @ede{} keybindings don't work, just
+@samp{Project} menu item, or if @ede{} key bindings don't work, just
 use @kbd{M-x revert-buffer @key{RET}} to force a refresh.  Sometimes
 creating a new project doesn't restart buffers correctly.
 
@@ -1059,7 +1059,7 @@ examples.
 @menu
 * Development Overview::
 * Detecting a Project::
-* User interface methods::      Methods associated with keybindings
+* User interface methods::      Methods associated with key bindings
 * Base project methods::        The most basic methods on @ede{} objects.
 * Sourcecode objects::          Defining new sourcecode classes.
 * Compiler and Linker objects::  Defining new compilers and linkers.

doc/misc/efaq-w32.texi

@@ -687,9 +687,9 @@ question also.
 @node CUA
 @subsection Standard Windows key bindings
 @findex cua-mode
-@cindex CUA keybindings
+@cindex CUA key bindings
 @cindex shift key, selecting with
-@cindex standard Windows keybindings
+@cindex standard Windows key bindings
 @cindex paste with C-v
 @cindex cut with C-x
 @cindex copy with C-c
@@ -697,7 +697,7 @@ question also.
 @cindex C-x to cut
 @cindex C-v to paste
 
-The keybindings of Emacs predate modern GUIs, and the keys that were
+The key bindings of Emacs predate modern GUIs, and the keys that were
 chosen by later GUIs for cut and copy were given important functions
 as extended keymaps in Emacs.  CUA mode attempts to let both bindings
 co-exist by defining C-x and C-c as @code{kill-region} and

doc/misc/gnus.texi

@@ -4499,7 +4499,7 @@ command or better use it as a prefix key.  For example:
     (gnus-group-jump-to-group "nndraft:drafts")))
 @end lisp
 
-On keys reserved for users in Emacs and on keybindings in general
+On keys reserved for users in Emacs and on key bindings in general
 @xref{Keymaps, Keymaps, , emacs, The Emacs Editor}.
 
 @item ^
@@ -13477,7 +13477,7 @@ Also @pxref{Formatting Variables}.
 @subsection Server Commands
 @cindex server commands
 
-The following keybinding are available in the server buffer.  Be aware
+The following key binding are available in the server buffer.  Be aware
 that some of the commands will only work on servers that you've added
 through this interface (with @kbd{a}), not with servers you've defined
 in your init files.

doc/misc/idlwave.texi

@@ -2670,7 +2670,7 @@ As a special case, any error message in the output will be displayed
 @node Debugging IDL Programs
 @section Debugging IDL Programs
 @cindex Debugging
-@cindex Keybindings for debugging
+@cindex Key bindings for debugging
 @cindex Toolbar
 
 Programs can be compiled, run, and debugged directly from the source

doc/misc/ido.texi

@@ -476,13 +476,13 @@ M-x customize-variable @key{RET} ido-xxxxx @key{RET}
 @end example
 
 @vindex ido-setup-hook
-To modify the keybindings, use the @code{ido-setup-hook}.  For example:
+To modify the key bindings, use the @code{ido-setup-hook}.  For example:
 
 @example
 (add-hook 'ido-setup-hook 'ido-my-keys)
 
 (defun ido-my-keys ()
- "Add my keybindings for Ido."
+ "Add my key bindings for Ido."
  (define-key ido-completion-map " " 'ido-next-match))
 @end example
 

doc/misc/octave-mode.texi

@@ -240,7 +240,7 @@ entering Octave commands at the prompt.  The buffer is in Inferior
 Octave mode, which is derived from the standard Comint mode, a major
 mode for interacting with an inferior interpreter.  See the
 documentation for @code{comint-mode} for more details, and use
-@kbd{C-h b} to find out about available special keybindings.
+@kbd{C-h b} to find out about available special key bindings.
 
 You can also communicate with an inferior Octave process from within
 files with Octave code (i.e., buffers in Octave mode), using the

doc/misc/remember.texi

@@ -313,7 +313,7 @@ Save (if it is modified) and bury the current buffer.
 @node Keystrokes
 @chapter Keystroke Reference
 
-@file{remember.el} defines the following keybindings by default:
+@file{remember.el} defines the following key bindings by default:
 
 @table @kbd
 

doc/misc/sem-user.texi

@@ -145,7 +145,7 @@ this means moving to the parent of the current tag.
 @item C-c , @key{SPC}
 Display a list of possible completions for the symbol at point
 (@code{semantic-complete-analyze-inline}).  This also activates a
-special set of keybindings for choosing a completion: @key{RET}
+special set of key bindings for choosing a completion: @key{RET}
 accepts the current completion, @kbd{M-n} and @kbd{M-p} cycle through
 possible completions, @key{TAB} completes as far as possible and then
 cycles, and @kbd{C-g} or any other key aborts the completion.
@@ -655,7 +655,7 @@ usual summary if the text at point has one of these faces.
 
 Semantic Idle Completions mode is a minor mode for performing
 @dfn{code completions} during idle time.  The completions are
-displayed inline, with keybindings that allow you to cycle through
+displayed inline, with key bindings that allow you to cycle through
 different alternatives.
 
 Semantic Idle Completions mode performs completion based on the
@@ -681,7 +681,7 @@ besselj [1 of 6 matches]
 @end example
 
 @noindent
-While the completion is being displayed, the following keybindings
+While the completion is being displayed, the following key bindings
 take effect:
 
 @table @kbd
@@ -785,7 +785,7 @@ Most of the other commands documented in this section call
 This command is bound to @kbd{C-c , @key{SPC}} when Semantic mode is
 enabled (@pxref{Semantic mode user commands}).  It displays a list of
 possible completions for the symbol at point, and activates a special
-set of keybindings for choosing a completion.
+set of key bindings for choosing a completion.
 
 You can type @key{RET} to accept the current completion, @kbd{M-n} and
 @kbd{M-p} to cycle through the possible completions, @key{TAB} to
@@ -1122,7 +1122,7 @@ that @code{grep} is much slower than the others.
 
 The commands to display symbol references are @kbd{C-c , g}
 (@code{semantic-symref-symbol} and @kbd{C-c , G}
-(@code{semantic-symref}).  These keybindings are available whenever
+(@code{semantic-symref}).  These key bindings are available whenever
 Semantic mode is enabled (@pxref{Semantic mode user commands}).
 
 @deffn Command semantic-symref-symbol sym

doc/misc/speedbar.texi

@@ -1218,4 +1218,3 @@ Two good values are @code{nil} and @code{statictag}.
 
 @bye
 @c  LocalWords:  speedbar's xref slowbar kbd subsubsection
-@c  LocalWords:  keybindings

doc/misc/srecode.texi

@@ -293,14 +293,14 @@ If the variable @code{srecode-takeover-INS-key} is set, then the key
 The most important key is bound to @code{srecode-insert} which is
 @kbd{C-c / /}, or @kbd{@key{INSERT} @key{INSERT}}.  @ref{Quick Start}.
 
-Major keybindings are:
+Major key bindings are:
 
 @table @kbd
 @item C-c / /
 Insert a template whose name is typed into the minibuffer.
 @item C-c / <lower case letter>
 Reserved for direct binding of simple templates to keys using a
-keybinding command in the template file.
+key binding command in the template file.
 @item C-c / <upper case letter>
 Reserved for template applications (Such as comment or get/set inserter.)
 @item C-c / E

doc/misc/vhdl-mode.texi

@@ -928,7 +928,7 @@ If you want to customize indentation, here you go:
   (setq tab-width 8
         ;; this will make sure spaces are used instead of tabs
         indent-tabs-mode nil)
-  ;; keybindings for VHDL are put in vhdl-mode-map
+  ;; key bindings for VHDL are put in vhdl-mode-map
   (define-key vhdl-mode-map "\C-m" 'newline-and-indent)
   )