msdos/sed1v2.inp: In the recipe for $(leimdir)/leim-list.el, edit the
prerequisites to be "temacs$(EXEEXT) $(BOOTSTRAPEMACS)", to avoid
the need to rebuild $(bootstrap_exe), which requires a Unixy shell
via lisp/Makefile.in's "update-subdirs" command.
msdos/sedlibmk.inp (am_libgnu_a_OBJECTS): Adjust the removal of
careadlinkat.$(OBJEXT) to the changes in lib/Makefile.in.
msdos/sed2v2.inp (DATA_START, GC_SETJMP_WORKS, HAVE_MENUS)
(HAVE_MOUSE): Edit for DJGPP, according to what was previously
done on src/s/msdos.h.
msdos/gmalloc.c (GMALLOC_INHIBIT_VALLOC): Don't reference.
src/s/msdos.h (BSD_SYSTEM, DATA_START, GC_SETJMP_WORKS, HAVE_MOUSE)
(HAVE_MENUS): Don't define, defined by editing config.in with
msdos/sed2v2.inp.
(GMALLOC_INHIBIT_VALLOC): Don't define.
(MODE_LINE_BINARY_TEXT): Remove, not used anymore.
msdos/mainmake.v2 (bootstrap-clean): Do a maintainer-clean in lib, not
bootstrap-clean (which doesn't exist).
msdos/inttypes.h (PRIuMAX) [__DJGPP__ < 2.04]: Define to "llu".
msdos/sedleim.inp (MKDIR_P): Edit to DOS "md" command.
msdos/sed1v2.inp: (LIB_CLOCK_GETTIME): Edit to empty.
Remove lines that invoke PAXCTL.
(clean): Fix recipe not to run Unixy shell commands.
msdos/sed2v2.inp (GETTIMEOFDAY_TIMEZONE): Edit to 'struct timezone'.
(HAVE_STRNCASECMP): Edit to 1.
msdos/sed3v2.inp (LIB_CLOCK_GETTIME): Edit to empty.
(C_SWITCH_SYSTEM): Add "-I../msdos".
msdos/sedlibmk.inp (GNULIB_GETTIMEOFDAY, GNULIB_PSELECT)
(GNULIB_SELECT, HAVE_STRUCT_TIMEVAL, HAVE_SYS_SELECT_H)
(HAVE_SYS_TIME_H, NEXT_AS_FIRST_DIRECTIVE_SYS_SELECT_H)
(NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H, NEXT_SYS_SELECT_H)
(NEXT_SYS_TIME_H, REPLACE_GETTIMEOFDAY, REPLACE_PSELECT)
(REPLACE_STRUCT_TIMEVAL): Edit to appropriate values.
(BUILT_SOURCES): Edit out sys/select.h and sys/time.h.
(mostlyclean-local, distclean-generic): Fix recipe not to run
Unixy shell commands.
src/sysselect.h [DOS_NT]: Don't include sys/select.h.
src/s/ms-w32.h (select, pselect): Don't define here, they are
defined in sysselect.h
src/sysselect.h (pselect) [!HAVE_PSELECT]: Redirect to sys_select.
src/sysdep.c: Don't include dos.h and dosfns.h.
src/process.c (sys_select):
src/msdos.c (sys_select): Accept one more argument and ignore it.
src/msdos.c (event_timestamp, sys_select): Use gnulib's gettime;
adapt data types and code to that.
src/dosfns.c:
src/msdos.c (gettime, settime): Define away the prototypes in dos.h,
which clashes with the gnulib function of the same name.
lisp/emacs-lisp/timer.el (timer-until): Subtract results of
float-time, instead of taking float-time of the result of
time-subtract, since float-time signals an error for negative time
arguments.
msdos/sedleim.inp (RUN_EMACS): Replace BUILT_EMACS with EMACS.
Remove stale editing of "else make quail".
(.PHONY, compile-targets): Remove targets.
(compile-main): Edit into something that can be done without
requiring a Unixy shell.
(bootstrap-clean): Likewise: edit to not require $(setwins).
msdos/sed1v2.inp: Edit "cd $(leimdir) && $(MAKE) ..." into the
equivalent "$(MAKE) $(MFLAGS) -C $(leimdir) ..." command.
This is the only thing left that uses it.
* configure.in (GNUSTEP_CFLAGS): Rename from C_SWITCH_X_SYSTEM.
* src/Makefile.in (GNUSTEP_CFLAGS): Rename from C_SWITCH_X_SYSTEM.
* lwlib/Makefile.in (C_SWITCH_X_SYSTEM): Remove.
(ALL_CFLAGS): Remove C_SWITCH_X_SYSTEM.
* oldXMenu/Makefile.in (C_SWITCH_X_SYSTEM): Remove.
(ALL_CFLAGS): Remove C_SWITCH_X_SYSTEM.
* msdos/sedlibmk.inp, msdos/sed1v2.inp:
GNUSTEP_CFLAGS replaces C_SWITCH_X_SYSTEM.
msdos/mainmake.v2 (boot): Condition the value on the existence of
autogen/README, not admin/admin.el, since the latter is now part
of the release tarball.
(install): Don't copy lib-src/fns.el, as that file is no longer
generated in that directory.
msdos/sed1v2.inp (LIB_PTHREAD, LIB_PTHREAD_SIGMASK): Edit to empty.
(SETTINGS_CFLAGS, SETTINGS_LIBS): Edit these instead of
GCONF_CFLAGS and GCONF_LIBS.
msdos/sedlibmk.inp (ALLOCA_H, AR, ARFLAGS, GNULIB_CHDIR, GNULIB_DUP)
(GNULIB_FDATASYNC, GNULIB_FDOPEN, GNULIB_FSTAT, GNULIB_PCLOSE)
(GNULIB_PTHREAD_SIGMASK, GNULIB_RAISE, GNULIB_SIGACTION)
(GNULIB_SIGPROCMASK, GNULIB_SIGNAL_H_SIGPIPE, HAVE_FDATASYNC)
(HAVE_PCLOSE, HAVE_POPEN, HAVE_POSIX_SIGNALBLOCKING)
(HAVE_PTHREAD_SIGMASK, HAVE_RAISE, HAVE_SIGACTION)
(HAVE_SIGHANDLER_T, HAVE_SIGINFO_T, HAVE_SIGSET_T)
(HAVE_STRUCT_SIGACTION_SA_SIGACTION)
(HAVE_TYPE_VOLATILE_SIG_ATOMIC_T, LIB_PTHREAD)
(LIB_PTHREAD_SIGMASK, NEXT_AS_FIRST_DIRECTIVE_SIGNAL_H)
(NEXT_SIGNAL_H, REPLACE_FDOPEN, REPLACE_PTHREAD_SIGMASK)
(REPLACE_RAISE): New edits.
(gl_LIBOBJS): Remove md5.o, filemode.o, and sha1.o. Add
pthread_sigmask.o.
(@GL_GENERATE_ALLOCA_H_TRUE@, @GL_GENERATE_ALLOCA_H_FALSE@): Edit
to comment out unneeded lines.
(warn-on-use.h): Edit the recipe commands to work with DJGPP
without requiring a Unixy shell.
msdos/inttypes.h (strtoimax) [DJGPP < 2.04]: New macro.
msdos/sed2v2.inp (HAVE_ALLOCA, HAVE_DECL_STRTOLL, HAVE_DECL_STRTOIMAX)
(HAVE_STRTOLL, HAVE_SIGSET_T, HAVE_SNPRINTF): New edits.
.bzrignore: Add ./GNUMakefile.unix.
config.bat: Rename GNUMakefile, so it is not run on MS-DOS.
Rename signal.in.h and alloca.in.h.
src/sysdep.c (snprintf) [EOVERFLOW]: If EOVERFLOW is not defined,
use EDOM.
msdos/sed1v2.inp: Edit "make-docfile -d FOO" commands to chdir back to
src/. Make editing of RUN_TEMACS commands less sensitive to
leading whitespace.
msdos/sedlibmk.inp (gl_LIBOBJS): Add sha1.o.
config.bat: Concatenate lisp.mk onto the end of src/Makefile.
msdos/sed1v2.inp (make-docfile commands): Recognize only if the line
begins with a TAB. Use $(etc) rather than a literal "../etc".
(`sed SED-COMMAND $(srcdir)/lisp.mk`): Edit to replace with "$(lisp).
(@lisp_frag@): Edit out.
msdos/sedlibmk.inp (GNULIB_GROUP_MEMBER, HAVE_GROUP_MEMBER): Edit to
zero.
src/callproc.c (Fcall_process) [MSDOS]: Fix arguments to
report_file_error introduced by the change from 2011-05-07.
See discussion in http://debbugs.gnu.org/8302
* configure.in (NS_SUPPORT, MOUSE_SUPPORT, TOOLTIP_SUPPORT)
(WINDOW_SUPPORT): Remove output variables that are no longer used.
* lib-src/makefile.w32-in (echolisp): Remove rule that is no longer needed.
(clean): No more echolisp.tmp.
* .bzrignore: Remove lib-src/echolisp.tmp.
* lisp/emacs-lisp/autoload.el (batch-update-autoloads):
Set autoload-excludes by parsing lisp/loadup.el rather than Makefiles.
* lisp/loadup.el: Update commentary.
* msdos/sed1x.inp (TOOLTIP_SUPPORT, WINDOW_SUPPORT):
* msdos/sed1v2.inp (MSDOS_SUPPORT, NS_SUPPORT, MOUSE_SUPPORT)
(TOOLTIP_SUPPORT, WINDOW_SUPPORT): No need to edit these any more.
* src/Makefile.in (MSDOS_SUPPORT_REAL, MSDOS_SUPPORT, NS_SUPPORT)
(REAL_MOUSE_SUPPORT, GPM_MOUSE_SUPPORT, MOUSE_SUPPORT, TOOLTIP_SUPPORT)
(BASE_WINDOW_SUPPORT, X_WINDOW_SUPPORT, WINDOW_SUPPORT): Remove.
(lisp): Set the order to that of loadup.el.
(shortlisp): Make it a copy of $lisp.
(SOME_MACHINE_LISP): Remove.
($(etc)/DOC): Depend just on $lisp, not $SOME_MACHINE_LISP too.
Use just $shortlisp, not $SOME_MACHINE_LISP too.
msdos/inttypes.h: New file.
msdos/sed2v2.inp (HAVE_DECL_STRTOULL, HAVE_DECL_STRTOUMAX)
(HAVE_STRTOULL, HAVE_STRTOULL): Define to 1.
src/sedlibmk.inp (BUILT_SOURCES): Edit out inttypes.h.
src/sed1v2.inp (CPPFLAGS): Edit to "-I../msdos".
Add ../msdos/inttypes.h to prerequisites of lread.o.
src/dosfns.c (Fint86, Fdos_memget, Fdos_memput): Use `ASIZE (FOO)'
rather than `XVECTOR (FOO)->size'.
src/termcap.c (tputs): Don't declare baud_rate.
msdos/sedlibmk.inp (gl_LIBOBJS): Add getloadavg.o.
msdos/sedleim.inp (RUN_EMACS): Rename from RUN-EMACS.
(BUILT_EMACS): Rename from BUILT-EMACS.
msdos/sed6.inp (MAKEINFO): Edit to "makeinfo".
(ENVADD): Adjust to MAKEINFO_OPTS.
(texinputdir): Don't edit.
msdos/sed2v2.inp (my_strftime): Edit to nstrftime.
msdos/sed1v2.inp (LIBOBJS): Edit to empty.
($(libsrc)/make-docfile): Two new edits, one each for every
invocation of make-docfile.
(move-if-change): Fix edit.
Remove some unused switches from $(ALL_CFLAGS), to make the GCC
command line shorter.
src/unexcoff.c (make_hdr): Fix prototype according to changes in
2010-10-03T13:59:56Z!dann@ics.uci.edu.
msdos/sed1v2.inp: Use $(..) instead of ${..} in all edit commands.
Needed because of changes in 2010-10-10T14:43:05Z!dann@ics.uci.edu.
msdos/sed6.inp (mkinfodir): Edit to avoid Unix shell-isms. Needed
because of changes in 2010-10-09T18:31:12Z!rgm@gnu.org.
* configure.in (PROFILING_LDFLAGS): Do not define, remove all uses.
* lib-src/Makefile.in (PROFILING_LDFLAGS): Remove, not needed.
* msdos/sed1v2.inp (PROFILING_LDFLAGS):
* msdos/sed3v2.inp (PROFILING_LDFLAGS): Remove, not defined anymore.
* src/Makefile.in (temacs): Use $(ALL_CFLAGS) on the link line.
(PROFILING_LDFLAGS): Remove, not needed anymore.
msdos/sed1v2.inp (C_WARNINGS_SWITCH, PROFILING_CFLAGS, PROFILING_LDFLAGS):
Edit to empty.
msdos/sed3v2.inp(C_WARNINGS_SWITCH, PROFILING_CFLAGS, PROFILING_LDFLAGS):
Edit to empty.
src/process.c (setup_process_coding_systems): Move to the part
shared by non-subprocesses systems, and make its body empty when
subprocesses is not defined.
(close_process_descs): Move to the part shared by non-subprocesses
systems.
sed1v2.inp (stamp-oldxmenu): Don't edit out in `temacs:' target,
which doesn't exist.
sed2v2.inp (HAVE_MEMCPY): Don't edit, already defined on <sys/config.h>.
* configure.in (C_OPTIMIZE_SWITCH, CANNOT_DUMP, SYSTEM_MALLOC):
(USE_MMAP_FOR_BUFFERS, C_WARNING_SWITCH): Set with shell, not cpp.
(LIBX): Remove, just use -lX11 in the one place this was used.
(cannot_dump): Replace with CANNOT_DUMP.
* src/Makefile.in (CANNOT_DUMP): Update for configure name change.
* src/s/freebsd.h (USE_MMAP_FOR_BUFFERS):
* src/s/irix6-5.h (USE_MMAP_FOR_BUFFERS):
* src/s/darwin.h (SYSTEM_MALLOC):
* src/s/sol2-10.h (SYSTEM_MALLOC): Move to configure.
* src/m/alpha.h: Remove old comment.
* src/s/aix4-2.h: Update comment.
* src/s/template.h: Remove USE_MMAP_FOR_BUFFERS.
* msdos/sed1v2.inp (CANNOT_DUMP): Update for configure name change.
* admin/CPP-DEFINES: Remove USE_MMAP_FOR_BUFFERS, CANNOT_DUMP.
* etc/DEBUG: Update SYSTEM_MALLOC and CANNOT_DUMP references.
Some re-filling.
config.bat: Remove white space around "+" in COPY commands.
msods/mainmake.v2 (version): Use emacs_version[] in src/emacs.c
instead of lisp/version.el (see 2010-05-15T21:11:37Z!raeburn@raeburn.org).
msdos/sed1v2.inp (MKDEPDIR): Edit to empty.
Delete lines in rules that invoke $(MKDEPDIR).
Fix editing rules that begin with "cd ../lisp".
Edit out sh if-then-else-fi constructs that test ${CANNOT_DUMP}.
Edit out "|| exit ;\" constructs in emacs${EXEEXT} rule.
* configure.in (NS_IMPL_GNUSTEP_INC, NS_IMPL_GNUSTEP_TEMACS_LDFLAGS)
(GNUSTEP_MAKEFILES): Remove.
(LD_SWITCH_SYSTEM_TEMACS): Move NS_IMPL_GNUSTEP_TEMACS_LDFLAGS
stuff to here.
* src/Makefile.in (NS_IMPL_GNUSTEP_INC, NS_IMPL_GNUSTEP_TEMACS_LDFLAGS):
Remove.
(TEMACS_LDFLAGS): Do not use NS_IMPL_GNUSTEP_TEMACS_LDFLAGS.
* msdos/sed1v2.inp (NS_IMPL_GNUSTEP_INC, NS_IMPL_GNUSTEP_TEMACS_LDFLAGS):
No longer present.
Comments:
See http://lists.gnu.org/archive/html/emacs-devel/2010-05/msg00846.html.
Nothing from gui.make was used at all in src/Makefile.in. The only
thing used from base.make was $CONFIG_SYSTEM_LIBS, but because we only
set shared _after_ sourcing base.make, it was always empty. We can
move the remaining flags, set in configure, to the standard variable
LD_SWITCH_SYSTEM_TEMACS.
* configure.in (LD_SWITCH_SYSTEM_EXTRA): Remove.
(LD_SWITCH_SYSTEM_TEMACS): Put darwin stuff from LD_SWITCH_SYSTEM_EXTRA
here instead.
* src/Makefile.in (LD_SWITCH_SYSTEM_EXTRA): Remove.
(TEMACS_LDFLAGS): Remove LD_SWITCH_SYSTEM_EXTRA.
* msdos/sed1v2.inp (LD_SWITCH_SYSTEM_EXTRA): No longer present.
* configure.in (ns_frag): New output file.
* src/Makefile.in (${ns_appdir}, ${ns_appbindir}Emacs, ns-app):
Move these rules to ns.mk.
* ns.mk: New file. Copyright years based on date of nextstep merge.
* msdos/sed1v2.inp(@ns_frag@): Edit to nothing.
* configure.in (OLDXMENU): Set to "nothing" if !HAVE_X11 || USE_GTK.
(OLDXMENU_TARGET): Set to empty if USE_GTK.
* src/Makefile.in (../src/$(OLDXMENU), $(OLDXMENU)): Always define rules.
* msdos/sed1x.inp (OLDXMENU): Replace any initial value.
* msdos/sed1v2.inp (OLDXMENU): Edit to "nothing".
* configure.in (cannot_dump): New output variable.
* src/Makefile.in (CANNOT_DUMP): New, set by configure.
(emacs${EXEEXT}, bootstrap-emacs${EXEEXT}): Use $CANNOT_DUMP.
* msdos/sed1v2.inp (CANNOT_DUMP): Edit to no.
* make-dist (src): Include *.mk.
* config.bat: Concatenate deps.mk onto the end of src/Makefile.
* configure.in (DEPFLAGS, MKDEPDIR): New output variables.
(deps_frag): New output file.
(AUTO_DEPEND): Remove this definition.
* src/Makefile.in (DEPDIR): New constant.
(DEPFLAGS): Set with configure, not cpp.
(MKDEPDIR): New, set by configure.
(.c.o, .m.o, ecrt0.o): Use $MKDEPDIR.
(clean): Use $DEPDIR.
(deps_frag): Include from configure.
Move static/dynamic dependency stuff to deps.mk/autodeps.mk.
* src/deps.mk, src/autodeps.mk: New files, extracted from Makefile.in.
* msdos/sed1v2.inp (DEPFLAGS, deps_frag): Edit to empty.
(MKDEPDIR): Edit to ':'.
* configure.in (LINKER, YMF_PASS_LDFLAGS): New output variables.
(ORDINARY_LINK): New AC_DEFINE.
(LIB_GCC): No need to set if ORDINARY_LINK.
* src/Makefile.in (LD, YMF_PASS_LDFLAGS): Set with configure, not cpp.
(GNULIB_VAR): Remove.
(LIBES): Use LIB_GCC instead of GNULIB_VAR.
* src/m/ibms390x.h (LINKER):
* src/m/macppc.h (LINKER) [GNU_LINUX]:
* src/s/aix4-2.h (ORDINARY_LINK):
* src/s/cygwin.h (LINKER):
* src/s/darwin.h (ORDINARY_LINK):
* src/s/gnu.h (ORDINARY_LINK):
* src/s/netbsd.h (LINKER):
* src/s/usg5-4.h (ORDINARY_LINK):
Move to configure.
* msdos/sed1v2.inp (LD): Edit to $(CC).
(YMF_PASS_LDFLAGS): Edit to `flags'.
* configure.in (REL_ALLOC): Unset on gnu, gnu-linux if DOUG_LEA_MALLOC.
(RALLOC_OBJ): New output variable.
* config.bat (RALLOC_OBJ): Edit to empty if sys_malloc.
* src/Makefile.in (RALLOC_OBJ): New, set by configure.
(rallocobj): Replace with the previous variable.
(otherobj): Use $RALLOC_OBJ.
* src/s/gnu.h (REL_ALLOC) [DOUG_LEA_MALLOC]:
* src/s/gnu-linux.h (REL_ALLOC) [DOUG_LEA_MALLOC]: Move undef to configure.
* msdos/sed1v2.inp (RALLOC_OBJ): Edit to ralloc.o.
* configure.in (GMALLOC_OBJ, VMLIMIT_OBJ): New output variables.
* config.bat (GMALLOC_OBJ, VMLIMIT_OBJ): Edit to empty if sys_malloc.
* src/Makefile.in (GMALLOC_OBJ, VMLIMIT_OBJ): New, set by configure.
(gmallocobj, vmlimitobj): Replace with previous two variables.
(otherobj): Use $GMALLOC_OBJ, $VMLIMIT_OBJ.
* msdos/sed1v2.inp (GMALLOC_OBJ): Edit to gmalloc.o.
(VMLIMIT_OBJ): Edit to vm-limit.o.
* configure.in (TEMACS_LDFLAGS2): New output variable.
* configure: Regenerate.
* msdos/sed1v2.inp (TEMACS_LDFLAGS2): Edit to $(LDFLAGS).
* src/Makefile.in (TEMACS_LDFLAGS2): New, set by configure.
(temacs${EXEEXT}): Combine the NS_IMPL_GNUSTEP case with the default.
* configure.in (NS_IMPL_GNUSTEP_TEMACS_LDFLAGS): New output variable.
(START_FILES): Set to empty if NS_IMPL_GNUSTEP.
(GNUSTEP_SYSTEM_HEADERS, GNUSTEP_SYSTEM_LIBRARIES): Do not output,
nothing uses.
* configure: Regenerate.
* src/Makefile.in (GNUSTEP_SYSTEM_LIBRARIES): Remove, unused.
(NS_IMPL_GNUSTEP_TEMACS_LDFLAGS): New, set by configure.
(LD) [NS_IMPL_GNUSTEP]: Set to $(CC) -rdynamic.
(temacs${EXEEXT}): Remove $LOCALCPP, never defined or referenced.
Make most of the NS_IMPL_GNUSTEP case the same as the default case.
* msdos/sed1v2.inp (GNUSTEP_SYSTEM_LIBRARIES): Remove.
(NS_IMPL_GNUSTEP_TEMACS_LDFLAGS): Edit to empty.
