src/termcap.c (tputs): Don't declare baud_rate.
msdos/sedlibmk.inp (gl_LIBOBJS): Add getloadavg.o.
msdos/sedleim.inp (RUN_EMACS): Rename from RUN-EMACS.
(BUILT_EMACS): Rename from BUILT-EMACS.
msdos/sed6.inp (MAKEINFO): Edit to "makeinfo".
(ENVADD): Adjust to MAKEINFO_OPTS.
(texinputdir): Don't edit.
msdos/sed2v2.inp (my_strftime): Edit to nstrftime.
msdos/sed1v2.inp (LIBOBJS): Edit to empty.
($(libsrc)/make-docfile): Two new edits, one each for every
invocation of make-docfile.
(move-if-change): Fix edit.
Remove some unused switches from $(ALL_CFLAGS), to make the GCC
command line shorter.
src/unexcoff.c (make_hdr): Fix prototype according to changes in
2010-10-03T13:59:56Z!dann@ics.uci.edu.
msdos/sed1v2.inp: Use $(..) instead of ${..} in all edit commands.
Needed because of changes in 2010-10-10T14:43:05Z!dann@ics.uci.edu.
msdos/sed6.inp (mkinfodir): Edit to avoid Unix shell-isms. Needed
because of changes in 2010-10-09T18:31:12Z!rgm@gnu.org.
* configure.in (PROFILING_LDFLAGS): Do not define, remove all uses.
* lib-src/Makefile.in (PROFILING_LDFLAGS): Remove, not needed.
* msdos/sed1v2.inp (PROFILING_LDFLAGS):
* msdos/sed3v2.inp (PROFILING_LDFLAGS): Remove, not defined anymore.
* src/Makefile.in (temacs): Use $(ALL_CFLAGS) on the link line.
(PROFILING_LDFLAGS): Remove, not needed anymore.
msdos/sed1v2.inp (C_WARNINGS_SWITCH, PROFILING_CFLAGS, PROFILING_LDFLAGS):
Edit to empty.
msdos/sed3v2.inp(C_WARNINGS_SWITCH, PROFILING_CFLAGS, PROFILING_LDFLAGS):
Edit to empty.
src/process.c (setup_process_coding_systems): Move to the part
shared by non-subprocesses systems, and make its body empty when
subprocesses is not defined.
(close_process_descs): Move to the part shared by non-subprocesses
systems.
sed1v2.inp (stamp-oldxmenu): Don't edit out in `temacs:' target,
which doesn't exist.
sed2v2.inp (HAVE_MEMCPY): Don't edit, already defined on <sys/config.h>.
* configure.in (C_OPTIMIZE_SWITCH, CANNOT_DUMP, SYSTEM_MALLOC):
(USE_MMAP_FOR_BUFFERS, C_WARNING_SWITCH): Set with shell, not cpp.
(LIBX): Remove, just use -lX11 in the one place this was used.
(cannot_dump): Replace with CANNOT_DUMP.
* src/Makefile.in (CANNOT_DUMP): Update for configure name change.
* src/s/freebsd.h (USE_MMAP_FOR_BUFFERS):
* src/s/irix6-5.h (USE_MMAP_FOR_BUFFERS):
* src/s/darwin.h (SYSTEM_MALLOC):
* src/s/sol2-10.h (SYSTEM_MALLOC): Move to configure.
* src/m/alpha.h: Remove old comment.
* src/s/aix4-2.h: Update comment.
* src/s/template.h: Remove USE_MMAP_FOR_BUFFERS.
* msdos/sed1v2.inp (CANNOT_DUMP): Update for configure name change.
* admin/CPP-DEFINES: Remove USE_MMAP_FOR_BUFFERS, CANNOT_DUMP.
* etc/DEBUG: Update SYSTEM_MALLOC and CANNOT_DUMP references.
Some re-filling.
config.bat: Remove white space around "+" in COPY commands.
msods/mainmake.v2 (version): Use emacs_version[] in src/emacs.c
instead of lisp/version.el (see 2010-05-15T21:11:37Z!raeburn@raeburn.org).
msdos/sed1v2.inp (MKDEPDIR): Edit to empty.
Delete lines in rules that invoke $(MKDEPDIR).
Fix editing rules that begin with "cd ../lisp".
Edit out sh if-then-else-fi constructs that test ${CANNOT_DUMP}.
Edit out "|| exit ;\" constructs in emacs${EXEEXT} rule.
* configure.in (NS_IMPL_GNUSTEP_INC, NS_IMPL_GNUSTEP_TEMACS_LDFLAGS)
(GNUSTEP_MAKEFILES): Remove.
(LD_SWITCH_SYSTEM_TEMACS): Move NS_IMPL_GNUSTEP_TEMACS_LDFLAGS
stuff to here.
* src/Makefile.in (NS_IMPL_GNUSTEP_INC, NS_IMPL_GNUSTEP_TEMACS_LDFLAGS):
Remove.
(TEMACS_LDFLAGS): Do not use NS_IMPL_GNUSTEP_TEMACS_LDFLAGS.
* msdos/sed1v2.inp (NS_IMPL_GNUSTEP_INC, NS_IMPL_GNUSTEP_TEMACS_LDFLAGS):
No longer present.
Comments:
See http://lists.gnu.org/archive/html/emacs-devel/2010-05/msg00846.html.
Nothing from gui.make was used at all in src/Makefile.in. The only
thing used from base.make was $CONFIG_SYSTEM_LIBS, but because we only
set shared _after_ sourcing base.make, it was always empty. We can
move the remaining flags, set in configure, to the standard variable
LD_SWITCH_SYSTEM_TEMACS.
* configure.in (LD_SWITCH_SYSTEM_EXTRA): Remove.
(LD_SWITCH_SYSTEM_TEMACS): Put darwin stuff from LD_SWITCH_SYSTEM_EXTRA
here instead.
* src/Makefile.in (LD_SWITCH_SYSTEM_EXTRA): Remove.
(TEMACS_LDFLAGS): Remove LD_SWITCH_SYSTEM_EXTRA.
* msdos/sed1v2.inp (LD_SWITCH_SYSTEM_EXTRA): No longer present.
* configure.in (ns_frag): New output file.
* src/Makefile.in (${ns_appdir}, ${ns_appbindir}Emacs, ns-app):
Move these rules to ns.mk.
* ns.mk: New file. Copyright years based on date of nextstep merge.
* msdos/sed1v2.inp(@ns_frag@): Edit to nothing.
* configure.in (OLDXMENU): Set to "nothing" if !HAVE_X11 || USE_GTK.
(OLDXMENU_TARGET): Set to empty if USE_GTK.
* src/Makefile.in (../src/$(OLDXMENU), $(OLDXMENU)): Always define rules.
* msdos/sed1x.inp (OLDXMENU): Replace any initial value.
* msdos/sed1v2.inp (OLDXMENU): Edit to "nothing".
* configure.in (cannot_dump): New output variable.
* src/Makefile.in (CANNOT_DUMP): New, set by configure.
(emacs${EXEEXT}, bootstrap-emacs${EXEEXT}): Use $CANNOT_DUMP.
* msdos/sed1v2.inp (CANNOT_DUMP): Edit to no.
* make-dist (src): Include *.mk.
* config.bat: Concatenate deps.mk onto the end of src/Makefile.
* configure.in (DEPFLAGS, MKDEPDIR): New output variables.
(deps_frag): New output file.
(AUTO_DEPEND): Remove this definition.
* src/Makefile.in (DEPDIR): New constant.
(DEPFLAGS): Set with configure, not cpp.
(MKDEPDIR): New, set by configure.
(.c.o, .m.o, ecrt0.o): Use $MKDEPDIR.
(clean): Use $DEPDIR.
(deps_frag): Include from configure.
Move static/dynamic dependency stuff to deps.mk/autodeps.mk.
* src/deps.mk, src/autodeps.mk: New files, extracted from Makefile.in.
* msdos/sed1v2.inp (DEPFLAGS, deps_frag): Edit to empty.
(MKDEPDIR): Edit to ':'.
* configure.in (LINKER, YMF_PASS_LDFLAGS): New output variables.
(ORDINARY_LINK): New AC_DEFINE.
(LIB_GCC): No need to set if ORDINARY_LINK.
* src/Makefile.in (LD, YMF_PASS_LDFLAGS): Set with configure, not cpp.
(GNULIB_VAR): Remove.
(LIBES): Use LIB_GCC instead of GNULIB_VAR.
* src/m/ibms390x.h (LINKER):
* src/m/macppc.h (LINKER) [GNU_LINUX]:
* src/s/aix4-2.h (ORDINARY_LINK):
* src/s/cygwin.h (LINKER):
* src/s/darwin.h (ORDINARY_LINK):
* src/s/gnu.h (ORDINARY_LINK):
* src/s/netbsd.h (LINKER):
* src/s/usg5-4.h (ORDINARY_LINK):
Move to configure.
* msdos/sed1v2.inp (LD): Edit to $(CC).
(YMF_PASS_LDFLAGS): Edit to `flags'.
* configure.in (REL_ALLOC): Unset on gnu, gnu-linux if DOUG_LEA_MALLOC.
(RALLOC_OBJ): New output variable.
* config.bat (RALLOC_OBJ): Edit to empty if sys_malloc.
* src/Makefile.in (RALLOC_OBJ): New, set by configure.
(rallocobj): Replace with the previous variable.
(otherobj): Use $RALLOC_OBJ.
* src/s/gnu.h (REL_ALLOC) [DOUG_LEA_MALLOC]:
* src/s/gnu-linux.h (REL_ALLOC) [DOUG_LEA_MALLOC]: Move undef to configure.
* msdos/sed1v2.inp (RALLOC_OBJ): Edit to ralloc.o.
* configure.in (GMALLOC_OBJ, VMLIMIT_OBJ): New output variables.
* config.bat (GMALLOC_OBJ, VMLIMIT_OBJ): Edit to empty if sys_malloc.
* src/Makefile.in (GMALLOC_OBJ, VMLIMIT_OBJ): New, set by configure.
(gmallocobj, vmlimitobj): Replace with previous two variables.
(otherobj): Use $GMALLOC_OBJ, $VMLIMIT_OBJ.
* msdos/sed1v2.inp (GMALLOC_OBJ): Edit to gmalloc.o.
(VMLIMIT_OBJ): Edit to vm-limit.o.
* configure.in (TEMACS_LDFLAGS2): New output variable.
* configure: Regenerate.
* msdos/sed1v2.inp (TEMACS_LDFLAGS2): Edit to $(LDFLAGS).
* src/Makefile.in (TEMACS_LDFLAGS2): New, set by configure.
(temacs${EXEEXT}): Combine the NS_IMPL_GNUSTEP case with the default.
* configure.in (NS_IMPL_GNUSTEP_TEMACS_LDFLAGS): New output variable.
(START_FILES): Set to empty if NS_IMPL_GNUSTEP.
(GNUSTEP_SYSTEM_HEADERS, GNUSTEP_SYSTEM_LIBRARIES): Do not output,
nothing uses.
* configure: Regenerate.
* src/Makefile.in (GNUSTEP_SYSTEM_LIBRARIES): Remove, unused.
(NS_IMPL_GNUSTEP_TEMACS_LDFLAGS): New, set by configure.
(LD) [NS_IMPL_GNUSTEP]: Set to $(CC) -rdynamic.
(temacs${EXEEXT}): Remove $LOCALCPP, never defined or referenced.
Make most of the NS_IMPL_GNUSTEP case the same as the default case.
* msdos/sed1v2.inp (GNUSTEP_SYSTEM_LIBRARIES): Remove.
(NS_IMPL_GNUSTEP_TEMACS_LDFLAGS): Edit to empty.
* configure.in (FONT_OBJ): Set to empty if !HAVE_X_WINDOWS.
* src/Makefile.in (FONT_DRIVERS): Remove, replace with $FONT_OBJ.
(obj, SOME_MACHINE_OBJECTS): Use $FONT_OBJ.
* msdos/sed1v2.inp (FONT_OBJ): Edit to empty for non-X case.
* msdos/sed1x.inp (FONT_OBJ): Edit to xfont.o for X case.
* src/Makefile.in (MSDOS_OBJ): Default to empty, let msdos scripts set it.
(MSDOS_X_OBJ): New variable.
(MSDOS_SUPPORT_REAL): New constant.
(MSDOS_SUPPORT): Set as a variable, not with cpp.
(obj): Use MSDOS_X_OBJ.
(lisp): Use MSDOS_SUPPORT as a variable.
* msdos/sed1v2.inp (MSDOS_OBJ): Edit to dosfns.o msdos.o.
(MSDOS_SUPPORT): Edit to $(MSDOS_SUPPORT_REAL).
* msdos/sed1x.inp (MSDOS_X_OBJ): Edit to w16select.o termcap.o.
* configure.in (GPM_MOUSE_SUPPORT): Remove.
(MOUSE_SUPPORT, TOOLTIP_SUPPORT, WINDOW_SUPPORT): New output variables.
(HAVE_WINDOW_SYSTEM, HAVE_MOUSE): Move out of AC_BOTTOM.
* src/Makefile.in (REAL_MOUSE_SUPPORT): New constant.
(GPM_MOUSE_SUPPORT): Now it's a constant.
(MOUSE_SUPPORT, TOOLTIP_SUPPORT, WINDOW_SUPPORT): Set with configure, not cpp.
* msdos/sed2x.inp (HAVE_WINDOW_SYSTEM): Define.
* msdos/sed1x.inp (TOOLTIP_SUPPORT): Edit to ${lispsource}tooltip.elc.
(WINDOW_SUPPORT): Edit to $(BASE_WINDOW_SUPPORT) $(X_WINDOW_SUPPORT).
* msdos/sed1v2.inp (MOUSE_SUPPORT): Edit to $(REAL_MOUSE_SUPPORT).
(TOOLTIP_SUPPORT, WINDOW_SUPPORT): Edit to empty.
* configure.in (NS_IMPL_GNUSTEP_INC): New output variable.
(GNUSTEP_MAKEFILES): Do not output.
* src/Makefile.in (@NS_IMPL_GNUSTEP_INC@): Use in place of #ifdef.
* msdos/sed1v2.inp (@NS_IMPL_GNUSTEP_INC@): Edit to nil.
* configure.in (LD_SWITCH_X_SITE, C_SWITCH_X_SITE): Do not define.
* src/Makefile.in (LD_SWITCH_X_SITE): Define as a variable, not via cpp.
(LIBX_BASE): Use $LD_SWITCH_X_SITE.
* nt/config.nt (LD_SWITCH_X_SITE, C_SWITCH_X_SITE): Remove undefs.
* msdos/sed1v2.inp: Comment.
